Search Results

Search found 22871 results on 915 pages for 'automated install'.

Page 297/915 | < Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >

• Why does ATI 5570 HD video card driver installation cause Windows 7 To Blue Screen?

  - by Mort

  This one is for the hive mind. I have a brand new Dell Optiplex 760 workstation with 4 gigabytes of RAM running Windows 7 Professional (32bit). This is a new box with nothing installed other than what was provided for directly by Dell. I installed a Saphire ATI PCI Express 5570 HD. Upon trying to install the 10.4 Catalyst drivers the system will blue screen. It blue screens during the hardware detection phase of the installation process. I have already performed the following trouble shooting steps: Changed system RAM Installed only 2 gigabytes of RAM Installed different versions of Catalyst drivers (10.4 - 9.12) Tried to install video only component of driver (vs entire Catalyst suite) Made sure Windows 7 was fully updated Flashed mother board BIOS to current version Removed and re-seated video card Contacted ATI Support (We all know how this went......) Verified supply outputting properly The blue screen error (via Windows BugCheck entry in event log) is a 0x000000CA and refers to a plug and play error most likely caused by a bad driver. The problem is that the driver installation process never gets far enough to actually install a driver. The resolution center in Windows provides a solution of installing the 10.4 Catalyst driver to resolve issue (which fails). Looking for some alternate views to resolve.

  Read the article

• Huh? JDK not found? (on Windows 7 64-bit)

  - by Android Eve

  I am setting up a development environment for the latest Android 2.3 on a fresh install of Windows 7 64-bit. I first installed the 64-bit JDK 6 (jdk-6u23-windows-x64.exe). Then, I installed 64-bit Eclipse Classic 3.6 (eclipse-SDK-3.6.1-win32-x86_64.zip). Then, I proceed to install the Android SDK Starter Package: installer_r08-windows.exe. But... upon start it says: "Java SE Development Kit (JDK) not found." Why? I just installed it. Is this a mismatch between 32-bit and 64-bit? How do I solve this? Update (1): I tried setting the %JAVA_HOME% environment variable, as well as setting the Installed JREs in Eclipse, as suggested below. None of these solved the problem. It appears that I am not the only experiencing the problem, as this thread suggests: http://stackoverflow.com/questions/1919340/android-sdk-setup-under-windows-7-pro-64-bit I wonder whether there is a 64-bit version of the Android SDK. Update (2): I used the zip version instead (android-sdk_r08-windows.zip), ran android.bat, updated all SDK packages, and installed the ADT plugin (8.0.1), not before having to check: 'Contact all update sites during install to find required software'. We'll see how this goes... Update (3): It worked! (going to accept @bubu's answer shortly) -- but why doesn't the emulator include the HelloAndroid app when I run it (Ctrl+F11) from Eclipse?

  Read the article

• Officially announced RAM support size doesn't apply to one of twin rigs with just one difference

  - by Deniz

  It'll take a little long to describe my situation but here goes the story : In January 2009 we bought (the OEM parts) two similar systems with just one difference. One of them had a Phenom X4 cpu and the other one (mine) a Phenom X3 cpu. At the beginning we had problems with both systems to power them on whilst having all of their ram slots being full. We decided to install the systems with just 2 slots populated and later try to install the rest of ram sticks. Both systems did succeed to support 3 sticks. We tried many different procedures to make the systems work with their fourth ram slots being populated. We waited for new bios updates and flashed the boards when they were available, we tried different ram sticks with different frequencies etc. One day while we were trying to install the fourth stick, the X4 machine did accept it. The other one did not. The most mind boggling thing was that after one of my trials the X3 system begun to not operate with the third slot populated. Our boards did have AMD 770 chipsets and we even tried to change the board of the X3 machine with another 770 chipset board. Now my questions are : Should we change the cpu ? What is causing the X3 system to not accept the fourth (or now the third) ram stick ? The manufacturers sites do claim that this boards do accept 4 ram sticks (but they only tested them with certain ram brands and models). What are the limitations for maximum ram configurations on motherboards ? Are there some "rules of thumb" except frequency, voltage, chip type considerations for which we did check our parts ? Our boards are : Gigabyte GA-MA770-DS3 Sapphire PC-AM2RX780 - PURE CrossFireX 770

  Read the article

• Installing mod_mono on Ubuntu: handler doesn't seem to get registered

  - by Trevor Johns

  I'm trying to install mod_mono on Apache 2 (Prefork MPM). I'm using Ubuntu Karmic, and just want an auto-hosting setup (so that any .aspx files are executed, similar to how PHP is normally setup). I did the following to install Mono: $ apt-get install libapache2-mod-mono mono-apache-server2 mono-devel $ a2dismod mod_mono $ a2enmod mod_mono_auto I've confirmed that mod_mono is getting loaded by Apache. However, any .aspx pages I try to load are returned unprocessed and still have an application/x-asp-net MIME type. It's as if the mod_mono handler never gets registered with Apache. Here's the contents of /etc/mod_mono_auto.load: LoadModule mono_module /usr/lib/apache2/modules/mod_mono.so And here's /etc/mod_mono_auto.conf: MonoAutoApplication enabled AddType application/x-asp-net .aspx AddType application/x-asp-net .asmx AddType application/x-asp-net .ashx AddType application/x-asp-net .asax AddType application/x-asp-net .ascx AddType application/x-asp-net .soap AddType application/x-asp-net .rem AddType application/x-asp-net .axd AddType application/x-asp-net .cs AddType application/x-asp-net .config AddType application/x-asp-net .dll DirectoryIndex index.aspx DirectoryIndex Default.aspx DirectoryIndex default.aspx I've even tried setting the handler explicitly: AddHandler mono .aspx .ascx .asax .ashx .config .cs .asmx .asp Nothing seems to help. Any ideas how to get this working?

  Read the article

• Getting Grub2 to recognize a Raid 10 boot/root

  - by xenoterracide

  I've been trying to get my raid to boot from grub2 for about 2 days now and I don't seem to be getting closer. The problem appears to be that it doesn't recognize my raid at all. It doesn't see (md0) etc. I'm not sure Why or how to change this. I'm using mdadm, 2 device (essentially a raid1) raid10,f2, which is currently degraded. I have tried adding the raid and mdraid modules with grub install along with others. I've tried several variation on grub-install such as grub-install --debug --no-floppy --modules="biosdisk part_msdos chain raid mdraid ext2 linux search ata normal" /dev/md0 I've been searching the net for an answer to what I haven't done but no luck. On my other drive which I plan on removing the raid is initialized and mounted fine on boot, but it's not the boot/root for that setup. My grub.cfg isn't recognized by grub since it can't read the raid partition so I'm not posting that. md0 is not listed in my /boot/grub/device.map.

  Read the article

• kickstart ks.cfg: Where should 'url' point?

  - by Stefan Lasiewski

  I have a kickstart file (ks.cfg) on a floppy (Old style). I am trying to install CentOS 5.4. The top of my ks.cfg says this: install # Install from local cdrom or over the network. #cdrom url --url http://kickstart.example.org/pub/centos/5.4/ On the Apache server side, this command is failing with these 404s: kickstart.example.org 192.168.16.180 - - [01/Jun/2010:17:24:30 -0700] "GET /pub/centos/5.4///disc1/.discinfo HTTP/1.1" 404 314 "-" "urlgrabber/3.1.0" kickstart.example.org 192.168.16.180 - - [01/Jun/2010:17:24:43 -0700] "GET /pub/centos/5.4/repodata/repomd.xml HTTP/1.1" 404 316 "-" "urlgrabber/3.1.0 yum/3.2.22" It seems that the value of my url doesn't match the directory structure on the server. I swear this worked a few months ago. Someone else maintains the Yum repository, and they say nothing has changed. What should the value of url URL be? Should this only include the OS (/pub/centos/5.4/), or should it include the architecture (/pub/centos/5.4/os/x86_64 )? I see that Kickstart is trying to grab a file called 'repomd.xml', but why is it looking in '/pub/centos/5.4/repodata/repomd.xml', when these files actually exist at '/pub/centos/5.4/os/x86_64/repodata/repomd.xml' and other locations at '/pub/centos/5.4/*/$ARCH/repodata/repomd.xml'? I don't see this documented or explained well in the [RedHat 5 Installation Guide1]

  Read the article

• Live Mesh starts exactly once on fresh Win7 Ultimate installation

  - by Reb.Cabin

  I did a fresh install of Windows 7 Ulimate 64-bit on a formatted drive on a refurbed Lenovo PC, applied all 102 (!) windows updates, windows seems to be working fine. No quirks installing, no apps, no junkware, just straight, legal, Win7 Ultimate right from an unopened 2009 Microsoft box. Ok, breathe sigh -- Install Live Mesh (no messenger, no mail, no writer, no photo, none of the rest of the Windows Live freeware). Set up my shares, let it run overnight. watch MOE.exe in the Task-Manager perf pane to make sure it's all settled down. reboot. Ok, check that MOE is running and files are getting updated properly from other machines in the mesh. Great. HOWEVER -- when I try to launch Windows Live Mesh app from the Start jewel, I get a brief hourglass, then nothing. Reboot. Same story. result -- the shares I already posted seem to be synching properly, but I can't run the app, so I can't add and delete shares. The background process MOE seems to run, but I can't get the app going. btw, the reason I did this fresh install is I had exactly the same experience running Vista, so I wiped the machine hoping it would solve this nasty problem. Imagine my surprise! Will be grateful for clues, advice, etc, please & thanks!

  Read the article

• PHP 5.3.5 Windows installer missing php_ldap.dll

  - by nmjk

  I'm working with Windows Server 2008, Apache 2.2. I'm using php-5.3.5-Win32-VC6-x86.msi as the installer, using the threadsafe version. I've gone through the install process four or five times just to make sure that I'm not missing anything ridiculous, but I don't think I am. The problem is that the php_ldap.dll extension simply doesn't seem to exist. It's not present in the installer interface (where the user is asked to choose which extensions to install), and it definitely doesn't appear in the ext/ directory after install. I found a lot of mentions of this issue for 5.3.3, including links to download the extension individually. Those links no longer exist, of course, and besides: they were for 5.3.3. I'd really rather use an extension that belongs with PHP 5.3.5. Anyone else encounter this problem? Any ideas as to what's going wrong? Anyone seen acknowledgement by the PHP folks that the file is indeed missing, and that it's an oversight? It's quite a frustration because the server I'm building has no purpose if I don't have PHP LDAP support. Cheers all, and thanks in advance for your assistance.

  Read the article

• restoring a failed SBS 2000 box...

  - by Brad Pears

  Hi there, I read a post where you had mentioned you have had a PERC card blow up on you in an SBS box... I've got a similar situation where one of my RAID drives failed and then the power supply failed before I could replace the drive... I then replaced the power supply and the failed drive and reconfigured the RAID array. I had a recent full backup of the my Win2k SBS's C: drive stored on my SYmantec backup exec server so I installed win2K server on the c: partition and then once I had that up and running, installed the backup exec agent so as to do a restore of the entire c drive including system state. THis all worked just fine, until I had to reboot. I received an "incorrect drive configuration" error and then it hangs. I figure that likely makes sense becasue I think my RAID array is configured slightly different now in that the partitions may be sizeded ever so slightly differently now than they were before I think... Is there a way I can just restore from my backup BUT maybe exclude some of the registry and hidden boot files it wants to restore so that it is booting with the current configuration now active on that machine - not the pre blow up configuration files? I also read a post that indicated you might have to install the exact same service pack etc... etc.. before attemting a restore but that does not make sense to me being as the entire c drive contents are going to be overwritten by the restore anyway? THe basic OS install is just to be able to get the backup exec agent installed . I can;t understand why one would need to install the exact same SP level. CAn you shed some light on what I might be able to do to get this thing up and running? Thanks,Brad

  Read the article

• Group Policy installation failed error 1274

  - by David Thomas Garcia

  I'm trying to deploy an MSI via the Group Policy in Active Directory. But these are the errors I'm getting in the System event log after logging in: The assignment of application XStandard from policy install failed. The error was : %%1274 The removal of the assignment of application XStandard from policy install failed. The error was : %%2 Failed to apply changes to software installation settings. The installation of software deployed through Group Policy for this user has been delayed until the next logon because the changes must be applied before the user logon. The error was : %%1274 The Group Policy Client Side Extension Software Installation was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before the next startup or logon for this user, and this may result in slow startup and boot performance. When I reboot and log in again I simply get the same messages about needing to perform the update before the next logon. I'm on a Windows Vista 32-bit laptop. I'm rather new to deploying via group policy so what other information would be helpful in determining the issue? I tried a different MSI with the same results. I'm able to install the MSI using the command line and msiexec when logged into the computer, so I know the MSI is working ok at least.

  Read the article

• cPanel web server redundancy advice?

  - by crgnz

  At present I operate a (reasonably low volume) web-hosting service with a Centos 5.3 server running cPanel/WHM. I would like to implement a level of redundancy such that in the event of server failure, I can restore service with a minimum of effort in less than 60 minutes. I also want to setup a secondary DNS that cPanel will replicate with. My current idea is to kill two birds with one stone by: My current server is called "www1" Purchase an identical server (HP DL360 G4) with mirrored disks. Call this server "www2" Install Centos 5.4 (or perhaps I should install 5.3 to be identical with www1) Install cPanel/WHM on this server and fully license it Setup www1 and www2 cPanel to replicate DNS with each other Setup a nightly replication script that does the following: a) rsync's the /home directory from www1 to www2 b) dumps all MySQL databases on www1 and copies them to a temp folder (with root access only) on www2 c) triggers a script to run on www2 that restores the MySQL dumps Thus each night a fully working copy of all the websites and MySQL databases is copied to www2. I do not have enough knowledge of MySQL replication to understand if it works safely and transparently with cPanel. Thus I propose the mysql dump/copy/restore due to not knowing any better! In the event that www1 dies a horrible death, I envisage that I could login to www2, change the IP addresses to those that www1 had, and presto, the websites are available again. The advantage of this idea is that it is fairly simple and "low tech" and thus does not require an expert sysadmin to setup and monitor (I am NOT an expert sysadmin) The disadvantage of this idea is that up to a full days worth of data changes would be lost. I think this would be acceptable to the sorts of customers I host at the moment. The other disadvantage would be having to pay for a full cPanel license, but I am comfortable with that cost, so for now all I want to discuss are technical considerations. Is this a sound scheme?

  Read the article

• samba4 not building in archlinux.

  - by kmplsv

  cp bin/tdbtool bin/tdbdump bin/tdbbackup /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/bin cp ./include/tdb.h /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/include cp tdb.pc /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/lib/pkgconfig cp libtdb.a libtdb.so.1.2.4 /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/lib rm -f /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/lib/libtdb.so ln -s libtdb.so.1.2.4 /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/lib/libtdb.so rm -f /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/lib/libtdb.so.1 ln -s libtdb.so.1.2.4 /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/lib/libtdb.so.1 mkdir -p /tmp/yaourt-tmp-root/aur-samba4/pkg/`/tmp/yaourt-tmp-root/aur-samba4/src/bin/python -c "import distutils.sysconfig; print distutils.sysconfig.get_python_lib(1, prefix='/opt/samba4/samba')"` cp tdb.so /tmp/yaourt-tmp-root/aur-samba4/pkg/`/tmp/yaourt-tmp-root/aur-samba4/src/bin/python -c "import distutils.sysconfig; print distutils.sysconfig.get_python_lib(1, prefix='/opt/samba4/samba')"` /bin/install -c -d /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/share/man/man8 for I in manpages/*.8; do \ /bin/install -c -m 644 $I /tmp/yaourt-tmp-root/aur-samba4/pkg//opt/samba4/samba/share/man/man8; \ done /bin/install: cannot stat `manpages/*.8': No such file or directory make: *** [installdocs] Error 1 Aborting... ==> ERROR: Makepkg was unable to build samba4. ==> Restart building samba4 ? [y/N] ==> ------------------------------- ==>c any ideas as what is causing my build to fail? i'm assuming it's an issue with manpages but i can't figure out exactly what package it is looking for that i don't have.

  Read the article

• Need help diagnosing my machine

  - by Tom Collins

  I have something that just slows my computer to a crawl sometimes. Not running anything big. Yesterday all I had running (besides background apps) were Firefox & Windows Explorer and could barely even switch screens. Nothing showing up in the task manager as hogging CPUs. I have all non-essential services stopped (MySQl & MSSQL) unless I need them. I made some restore points not long ago, but they disappeared. This is a development mach with a LOT of apps installed, so I really, really do not want to re-install Windows. So, what I'm looking for are ideas or tools I can use to help diagnose this problem. The only clues I have is this started right after I installed Office 2013 (with Office 2010 still installed as well) installed Visual Studio 2012 (also keeping 2010 as a co-install) and installed MSSQL 2012 (upgrade from 2008, no co-install) Also, computer runs fine in Safe Mode. I've just ran out of ideas of what to check. Any help / suggestions would much appreciated. Thanks P.S. I'm running Win 7 Pro (x64). Office is also 64 bit. Visual Studio & MSSQL are 64 bit if that option was available (not sure).

  Read the article

• Upgrade Nokia Maps from v2 to v3 fails

  - by ssollinger

  I'm trying to install Nokia Maps 3.0 on my Nokia N82, without much success. I believe other similar Nokia phones have the same problem. My phone is connected through USB in "PC Suite" mode, and the latest firmware available for N82 is installed. I currently have Maps 2.0 installed. I'm installing from a Windows XP PC, and tried the update first from within Ovi Suite (latest version) and from Nokia Maps Updater (latest version). In both cases it detects that there is an update available (Maps 3.0), downlowds it and starts the install. On my phone, I then get the following error message: Unable to install. Component is built in. And on the PC I get the error Error Cannot update maps application. The installation failed or was cancelled on the phone (18). I found an entry for Maps in the App. manager and deleted it (and turned phone off and on again afterwards), but this didn't make any difference (and I don't think it changed the version of Maps installed either). This is the release version of Maps 3.0, not the beta. I found the problem mentioned many times on various web sites, but couldn't find a solution anywhere. Has anybody any ideas how to get the upgrade from Maps 2.0 to Maps 3.0 to work?

  Read the article

• Computer Comparison - which is "better"

  - by David Murdoch

  A company I work with recently replaced their old server and gave it to me. Their old server is a Dell PowerEdge 2600. I've been playing with the machine and even installed Windows Server 2008 on it...and it seems to run it pretty well. Here are the specs for the two machines: Dev Machine: AMD Athlon64 3000+ 2.38 GHz (overclocked from 1.8GHz [@ 280x8.5] - it is stable-ish) Memory (RAM): 1x1GB OCZ PC3200 (Dual-Channel) 300GB HD OS: Windows XP Pro (32bit) SuperPi 1M digit test: 40 seconds Dell PowerEdge 2600 Server: Intel Xeon CPU 2.8GHz 2.8GHz Memory (RAM): 512MBx2 (PC2700, not dual channel) 68GB HD (RAID 5) OS: Windows Server 2000 (32bit) SuperPi 1M digit test: 56 seconds [using 1 processor] (Themes and Aero-Flass UI turned off, of course) I use my computer to regularly run Photoshop CS5, Illustrator CS5, Flash CS5, 5 browsers (Chrome, FF, IE, Safari, Opera), iTunes, Visual Studio 2010, and Kaspersky Internet Security 2010 [sometimes simultaneously :-) ]. The SuperPi test has my dev machine coming in about 30% faster than the Server machine...though this could be due to the server running "Vista" with background processes prioritized. Do you think it would be realistic/advantageous for me to move from my dev machine to the Dell PowerEdge 2600? Is it possible to install additional DVD drives/burners on the server? Can I install my internal 300 GB hard drive on the server? Can I add some USB 2.0 ports? Note: I'll probably install Win XP Pro on the dev machine if I do switch. If not, are there any creative and useful way for me to take advantage of this server (with the goal of faster computing)?

  Read the article

• .NET 2.0 "not installed" after upgrade to Windows 7

  - by Greg B

  I Recently upgraded to Windows 7 (Business) RTM from Vista Business and everything is going great, it fixed the BSOD I was getting and the performance of my laptop is improved. However; during the upgrade, something seems to have gone awry with my .NET 2.0 installation. When attempting to install FlashDevelop, I get the following error from the installer package You need to install Maicrtosoft.NET 2.0 runtime before installing FlasgDevelop. You Have . I have a previous release of FD installed from before the upgrade and this still works fine. So I gave up on the new version of FD and got on with my day. Then I tried to install the Microsoft SQL Server Database Publishing Wizard 1.1 and that says I am missing a couple of prerequisites, one of which is .NET 2.0. When I download the .NET 2.0 runtime the installer fails, telling me that This product is already installed as part of the operating system. Does anyone have any idea how to make my computer recognise that .NET 2 is in fact installed. UPDATE I've checked Windows Features and everything relating to .NET is already installed. I've also been through my list of installed programs looking for .NET to in an attempt to uninstall it but it isn't there. In fact, the only thing that looks like a .NET distro that I am able to uninstall is the 3.5 Compact Framework.

  Read the article

• Virtual PC duplication process

  - by Toddintr

  This is the process I use for duplicating a Virtual PC (on Windows 7): 1 - Create a new VPC. 2 - Install Windows 7 on the new VPC. 3 - Configure the new Windows 7 installation (install Windows updates, install applications, etc). 4 - Run Sysprep on the new VPC. 5 - Shut down the new VPC. 6 - Make a copy of the new VPC's VHD file. 7 - Create a new VPC, specify "use existing VHD file" in the wizard and provide the name of the copied VHD file. Above works fine but there is one point that threw me off: During the OOBE for the duplicated VPC, when asked for a user name, I had to specify a different user name than the one I had specified for the base VPC. This makes sense because the copied VPC already has that user name. But what I did not understand is why I was asked for a new user name at all? Is it because it is part of the OOBE process and when the OOBE was designed by Microsoft, they did not think of the fact that base OS images could be copied? Thanks - -Todd

  Read the article

• php5-mysqlnd on debian wheezy/sid?

  - by Joseph

  I am trying to install php5-mysqlnd on a fresh install of Wheezy (/etc/debian_version refers to it as wheezy/sid) and I'm having a problem: root@debian:/var/www/lottery1# apt-get install php5-mysqlnd Reading package lists... Done Building dependency tree Reading state information... Done php5-mysqlnd is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y Setting up php5-mysqlnd (5.4.0-3) ... ucfr: Attempt from package php5-mysqlnd to take /etc/php5/mods-available/mysql.ini away from package php5-mysql ucfr: Aborting. dpkg: error processing php5-mysqlnd (--configure): subprocess installed post-installation script returned error exit status 4 Processing triggers for libapache2-mod-php5 ... configured to not write apport reports Reloading web server config: apache2. Errors were encountered while processing: php5-mysqlnd E: Sub-process /usr/bin/dpkg returned an error code (1) It seems there is some sort of conflict with the php5-mysql package, but I still get this error even after removing (with --purge) the php5-mysql package. Any thoughts? I'm trying to run a web tool that makes heavy use of mysqli_result::fetch_all(). Thanks!

  Read the article

• None of usb-controllers are working after a crash

  - by Cray

  So I have a GA-p35-DS4 mboard with a Q6600, running windows7-x64. After a random crash with a bluescreen (not caused by anything particular as I recall), none of the usb-controllers are working. (And none of the devices connected to those usb ports). All the controllers are showed up in the device manager, but every one has a warning-icon (as they are not functioning properly). The windows identifies them correctly, it shows exactly the model of each controller, and it says that the driver is installed. Now, when I try to reinstall the driver (Update driver menu item in the device manager), it tries to find it, finds the driver, but quits saying that the driver was found but could not be installed. Additionally, it displays "This operation requires an interactive window station", whatever that means... Now get this, the same thing happens with a new pci-usb controller card! It is found (actually each time the machine starts, it is found as new hardware), but trying to install drivers leads nowhere, I am getting the same message about an interactive window station. (tried to install drivers from the acoompanying CD) I have tried deleting those devices from device manager and let windows find them again, but that leads to same results. None of the ports on this extension card work either. This should not be a hardware problem, a usb keyboard connected to the builtin usb controller works in bios, and even in another OS running the same computer (old xp installation) What to do? Will I have to reinstall? Can deleting infcache.1 help? Is there some way to let windows remove all old drivers and try to find all hardware again, this time only looking for drivers on a windows install disk or something?

  Read the article

• Upgrading Visio 2000 to Visio 2007

  - by dirtside

  I have Microsoft Visio 2000 SR 1, and recently purchased Microsoft Office Visio Standard 2007 with the understanding (supported by the product info and some other research) that I'd be able to upgrade. However, when I install 2007, it tells me it can't find a previous install of Visio, but... it's right there! Here's the exact message: "Setup can't find a version of Microsoft Office on your computer. If Office is installed on a disk or network share, click the browse button to select the appropriate disk or share... (etc.)" No matter which directory or drive I pick (various Office installs, the old Visio install, various subdirectories) it gives the following message: "The path you have chosen does not point at a qualifying upgradeable product. Click 'Retry' to try again or 'Cancel' to quit setup." Any ideas? This is a legit copy of Visio 2007 (purchased from Amazon) and the copy of Visio 2000 is legit as well. I'm not sure what exactly the installer is looking for that it would consider a "qualifying upgradeable product". A specific file?

  Read the article

• Installing Tomcat on CentOS 5

  - by andybaird

  Disclaimer: I am not a server admin, I am a windows user that has lead a life of sinful installation wizards and drag and drop I'm attempting to install Tomcat on CentOS 5 hosted by a MediaTemple dedicated virtual server. I basically followed this guide: Installed jpackage and configured the yum.repo.d jpackage file to set enabled=1 Used yum to install java (yum install java) Downloaded the binary distribution of tomcat with "wget http://archive.apache.org/dist/tomcat/tomcat-6/v6.0.14/bin/apache-tomcat-6.0.14.tar.gz" set JAVA_HOME to point at the jdk location I found with "export JAVA_HOME=/usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0/" I gunzip/untar the Tomcat files and run ./startup.sh to start the Tomcat server. That is supposed to put the Tomcat server at myserver.com:8080 - however, I just get a could not contact host error when I try to browse to it (or when I try 'curl localhost:8080' from SSH) After I type ./startup.sh, here is the console output: [root@myserver bin]# ./startup.sh Using CATALINA_BASE: /root/apache-tomcat-6.0.14 Using CATALINA_HOME: /root/apache-tomcat-6.0.14 Using CATALINA_TMPDIR: /root/apache-tomcat-6.0.14/temp Using JRE_HOME: /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0/ [root@myserver bin]# Is there a step I have missed here? Edit: I've now discovered by looking at the log the following error is occuring: Error occurred during initialization of VM Could not reserve enough space for object heap

  Read the article

• Windows XP restarting repeatedly after a fresh restore

  - by DWilliams

  I don't normally deal with Windows but someone wanted me to fix their computer with Windows XP on it. It was just restarting every time it tried to boot. It would not go into safe mode, the result was the same regardless of the selected mode. The computer is like 4 years old and has been running the same installation for that entire time, so I figured the easiest solution was just to back up their files and re-install. I loaded the computer up with a live CD and copied their files off to a USB drive, then proceeded to run HP's "factory restore" feature (which I'm not particularly fond of, I'd rather have a disk to install from than reload all the crapware HP gets paid to install for you). It restored, and I put all their files back, installed their programs, and started the full windows update process. Everything seemed great so I left and told them what to do once it finished. A few hours pass, and my phone rings. Apparently it started doing the exact same thing as before once the updates finished. I don't have the computer sitting in front of me now so I can't really provide any more information than that. What could be causing this and, more importantly, how do I fix it? The fact that the same problem resurfaced after the restore makes me think it's either a hardware problem or an update breaking the computer.

  Read the article

• Switching from prefork MPM to worker MPM + php-fpm on ubuntu

  - by Shane

  All tutorials I found were how to fresh install worker MPM + PHP-FPM, since my wordpress blog's already up and running with prefork MPM, correct me if I'm wrong in the simulated installation process: I'm on ubuntu and according to some tutorials, the following lines would do all the tricks: apt-get install apache2-mpm-worker libapache2-mod-fastcgi php5-fpm php5-gd a2enmod actions fastcgi alias Then you setup configuration in /etc/apache2/conf.d/php5-fpm.conf: <IfModule mod_fastcgi.c> AddHandler php5-fcgi .php Action php5-fcgi /php5-fcgi Alias /php5-fcgi /usr/lib/cgi-bin/php5-fcgi FastCgiExternalServer /usr/lib/cgi-bin/php5-fcgi -host 127.0.0.1:9000 -pass-header Authorization </IfModule> After all these, restart: service apache2 restart && service php5-fpm restart Question: 1) Would it cause any down time in the whole process for previously running sites with prefork MPM? 2) Do you have to change any already existent configuration files like php or mysql or apache2(would they take effect immediately after the switch without you doing anything)? 3) I've already have apc up and running, do you have to re-install/re-configure it after the switch? 4) How do you find out if apache2 is working in worker MPM mode as expected? Thanks a lot!

  Read the article

• Passenger not booting Rails App

  - by firecall

  I'm at the end of ability, so time to ask for help. My hosting company are moving me to a new server. I've got my own VPS. It's a fresh CentOS 5 install with Plesk 9.5.2 Essentially Passenger just doesnt seem to be booting the Rails app. It's like it doesnt see it's a Rails app to be booted. I've got Rails 3.0 install with Ruby 1.9.2 built from source. I can run Bundle Install and that works. I've currently got Passenger 3 RC1 installed as per here, but have tried v2 as well. My conf/vhost.conf file looks like this: DocumentRoot /var/www/vhosts/foosite.com.au/httpdocs/public/ RackEnv development #Options Indexes I've got a /etc/httpd/conf.d/passenger.conf file which looks like this: LoadModule passenger_module /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.0.pre4/ext/apache2/mod_passenger.so PassengerRoot /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.0.pre4 PassengerRuby /usr/local/bin/ruby PassengerLogLevel 2 and all I get is a 403 forbidden or the directory listing if I enable Indexes. I dont know what else to do! Yikes. There's nothing in the Apache error log that I can see. The new server admin isnt much help as I think he's a bit junior and says he doesnt know about Rails... sigh :/ I'm a programmer and server admin isnt my bag :(

  Read the article

• Do registry issues with Win7 persist through a recovery from a system image?

  - by user59089

  So I need a bit of advice, please; here's my situation: I have 1) a system image on an a brand new external 1 TB SATA drive, that I managed to successfully capture before my 2) primary system drive went down. I realize this is a fairly simple matter of buying a new primary drive and performing the recovery to the fresh disk...however, the issue is that I believe Win7 was also having some significant issues of its own--basically, Update unable to install updates, and Backup continually ditching the auto backup schedule. I'd been trying to address those issues when my system was still working, but it's been so fruitless, I'm convinced a Win7 re-install would be best, and now I'm concerned that if I was in fact having what I believe are likely registry-related issues before, that these will persist through a recovery--would that likely be correct? I'm mainly worried about recovering my files, so if I did a full recovery from the image, should I be able to then access my individual files, and copy them manually to an external drive, so I can then do a full re-install of Win7? Sory if this seems obvious, but I've never done a recovery before and just trying to make sure there's no red flags with what I have in mind...

  Read the article

< Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >