Search Results

Search found 13325 results on 533 pages for 'domain transferring'.

Page 297/533 | < Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >

• Problem IIS 7.0 Locking files durring upload

  - by viscious

  I am running a server 2008 with iis7 and the ftp addon on to iis 7.0 I have the ftp site configured and mostly working Except that about 70% of the time when transferring a file the upload will hang forever. If I disconnect the ftp client and reconnect and try to upload the same file I will get an error on the client saying the file is locked. I have to restart the ftp service to clear the lock. I fired up process explorer and did a search on the file in question and sure enough the ftp service has a lock on the file and it takes around 20 minutes to release the lock on its own (and sometimes longer). This lock stays around even after I disconnect the client. Like I said this only happens about 70% of the time, the other 30% of the time it goes through just fine. Things i have verified. -Not a firewall issue. Server is using passive port range 8000-9000 which is allowed on the firewall. -Not a nat issue, server has a globally rout-able ip address -all recommended/required updates installed I have 5 other servers in a very similar configuration and this is the only one i have problems with.

  Read the article

• Convert a cassette tape recording to digital format

  - by Electric Automation

  Has anyone been successful with transferring audio cassette tape recordings to a digital format? I would like to preserve old cassette tape recordings of my grandparents to some digital format: MP3, WAV, etc... The quality of the tapes are mediocre. I think I can handle the quality restoration but getting the audio from tape to digital is my question. Below is a list of the hardware that I can work with: Cassette Deck: I have a Technics stereo cassette deck model RS-B12. It has separate left and right IN and OUT RCA type jacks on the back. In the front it has a headphone phono jack, plus left and right mic input phono jacks. On the computer side: -I have a Windows Vista PC with no additional software other than what came with the machine from Costco. No sound editing software that I can see. There is no sound card on the PC. On the front panel there is a mini-phono mic input jack and there are several different types of in/out mini-phono jacks on the back. In addition, USB and Firewire. I also have access to a new (2009) iMac with a mini-phono input jack for a powered mic or other audio source and GarageBand that has come with the computer. In addition, USB and Firewire. What are my options for getting these cassette recordings into a digital format? Whats the best format? What sort of wires would I need and will I want to utilize the USB or Firewire or can I simply use the audio inputs on the PC (or Mac) to receive the audio stream?

  Read the article

• CPU-adaptive compression

  - by liori

  Hello, Let assume I need to send some data from one computer to another, over a pretty fast network... for example standard 100Mbit connection (~10MB/s). My disk drives are standard HDD, so their speed is somewhere between 30MB/s and 100MB/s. So I guess that compressing the data on the fly could help. But... I don't want to be limited by CPU. If I choose an algorithm that is intensive on CPU, the transfer will actually go slower than without compression. This is difficult with compressors like GZIP and BZIP2 because you usually set the compression strength once for the whole transfer, and my data streams are sometimes easy, sometimes hard to compress--this makes the process suboptimal because sometimes I do not use full CPU, and sometimes the bandwidth is underutilized. Is there a compression program that would adapt to current CPU/bandwidth and hit the sweet spot so that the transfer will be optimal? Ideally for Linux, but I am still curious about all solutions. I'd love to see something compatible with GZIP/BZIP2 decompressors, but this is not necessary. So I'd like to optimize total transfer time, not simply amount of bytes to send. Also I don't need real time decompression... real time compression is enough. The destination host can process the data later in its spare time. I know this doesn't change much (compression is usually much more CPU-intensive than decompression), but if there's a solution that could use this fact, all the better. Each time I am transferring different data, and I really want to make these one-time transfers as quick as possible. So I won't benefit from getting multiple transfers faster due to stronger compression. Thanks,

  Read the article

• CodePlex Daily Summary for Wednesday, October 31, 2012

  CodePlex Daily Summary for Wednesday, October 31, 2012Popular ReleasesDevpad: 4.25: Whats new for Devpad 4.25: New Theme support New Export Wordpress Minor Bug Fix's, improvements and speed upsAssaultCube Reloaded: 2.5.5: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Changelog: Fixed potential bot bugs: Map change, OpenAL...Edi: Edi 1.0 with DarkExpression: Added DarkExpression theme (dialogs and message boxes are not completely themed, yet)DirectX Tool Kit: October 30, 2012 (add WP8 support): October 30, 2012 Added project files for Windows Phone 8MCEBuddy 2.x: MCEBuddy 2.3.6: Changelog for 2.3.6 (32bit and 64bit) 1. Fixed a bug in multichannel audio conversion failure. AAC does not support 6 channel audio, MCEBuddy now checks for it and force the output to 2 channel if AAC codec is specified 2. Fixed a bug in Original Broadcast Date and Time. Original Broadcast Date and Time is reported in UTC timezone in WTV metadata. TVDB and MovieDB dates are reported in network timezone. It is assumed the video is recorded and converted on the same machine, i.e. local timezone...MVVM Light Toolkit: MVVM Light Toolkit V4.1 for Visual Studio 2012: This version only supports Visual Studio 2012 (and all Express editions too). If you use Visual Studio 2010, please stay tuned, we will publish an update in a few days with support for VS10. V4.1 supports: Windows Phone 8 Windows 8 (Windows RT) Silverlight 5 Silverlight 4 WPF 4.5 WPF 4 WPF 3.5 And the following development environments: Visual Studio 2012 (Pro, Premium, Ultimate) Visual Studio 2012 Express for Windows 8 Visual Studio 2012 Express for Windows Phone 8 Visual...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.73: Fix issue in Discussion #401101 (unreferenced var in a for-in statement was getting removed). add the grouping operator to the parsed output so that unminified parsed code is closer to the original. Will still strip unneeded parens later, if minifying. more cleaning of references as they are minified out of the code.RiP-Ripper & PG-Ripper: PG-Ripper 1.4.03: changes NEW: Added Support for the phun.org forum FIXED: Kitty-Kats new Forum UrlLiberty: v3.4.0.1 Release 28th October 2012: Change Log -Fixed -H4 Fixed the save verification screen showing incorrect mission and difficulty information for some saves -H4 Hopefully fixed the issue where progress did not save between missions and saves would not revert correctly -H3 Fixed crashes that occurred when trying to load player information -Proper exception dialogs will now show in place of crashesPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 7): This release is compatible with the version of the Smooth Streaming SDK released today (10/26). Release 1 of the player framework is expected to be available next week. IMPROVEMENTS & FIXESIMPORTANT: List of breaking changes from preview 6 Support for the latest smooth streaming SDK. Xaml only: Support for moving any of the UI elements outside the MediaPlayer (e.g. into the appbar). Note: Equivelent changes to the JS version due in coming week. Support for localizing all text used in t...Send multiple SMS via Way2SMS C#: SMS 1.1: Added support for 160by2Quick Launch: Quick Launch 1.0: A Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsPress Win+Q and start to search and run. http://www.codeplex.com/Download?ProjectName=quicklaunch&DownloadId=523536Orchard Project: Orchard 1.6: Please read our release notes for Orchard 1.6: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Media Companion: Media Companion 3.507b: Once again, it has been some time since our release, and there have been a number changes since then. It is hoped that these changes will address some of the issues users have been experiencing, and of course, work continues! New Features: Added support for adding Home Movies. Option to sort Movies by votes. Added 'selectedBrowser' preference used when opening links in an external browser. Added option to fallback to getting runtime from the movie file if not available on IMDB. Added new Big...MSBuild Extension Pack: October 2012: Release Blog Post The MSBuild Extension Pack October 2012 release provides a collection of over 475 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...NAudio: NAudio 1.6: Release notes at http://mark-dot-net.blogspot.co.uk/2012/10/naudio-16-release-notes-10th.htmlPowerShell Community Extensions: 2.1 Production: PowerShell Community Extensions 2.1 Release NotesOct 25, 2012 This version of PSCX supports both Windows PowerShell 2.0 and 3.0. See the ReleaseNotes.txt download above for more information.Umbraco CMS: Umbraco 4.9.1: Umbraco 4.9.1 is a bugfix release to fix major issues in 4.9.0 BugfixesThe full list of fixes can be found in the issue tracker's filtered results. A summary: Split buttons work again, you can now also scroll easier when the list is too long for the screen Media and Content pickers have information of the full path of the picked item Fixed: Publish status may not be accurate on nodes with large doctypes Fixed: 2 media folders and recycle bins after upgrade to 4.9 The template/code ...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2.2: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2...Rawr: Rawr 5.0.2: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...New ProjectsAccess 2010 Application Platform - Build Your Own Database: An Access database used as an Application Platform, where defined modules with functionality can be easily added.ASPMVCUtil: ASPMVCUtil is a compilation of libraries useful for developing in ASP.NET MVCBCF.Net: BCF.Net?????Microsoft.Net?????，??????????????????????????????。BCF.Net?????.Net?????????，???????????????????，???????????。Bytecode Translator: A translator from .NET bytecode to Boogie: Bytecode Translator is a translator from .NET bytecode to Boogie.Chalice: Specification and Verification of Concurrent Programs: Chalice is a verifier for concurrent programsDafny: An Automatic Program Verifier for Functional Correctness: Dafny is an automatic program verifier for functional correctness.DNN Task Manager1: This is the DnnTaskManager Project I have started with to learn how to create DNN modules.E Ledger: E Ledger provide user friendly interface to manage daily ledger party wise. And reporting in this project is platform independent. Reporting is in HTML format.FederatedScaleOutDatabases: A broker piece of code that helps to use relational databases in a scale-out fashion. The broker exposes a LINQ based API.FIFP: project for schedule testFileStrider: Explores 50 biggest forlders and files which "eat" disk spaceFlake ID Generators: Flake Id Generators is a set of decentralized, k-ordered id generation services in C#GFC and ASP.Net: Google Friend Connect and ASP.Net TechnologyGPUVerify: A verifier for GPU kernels: GPUVerify is a tool for verifying race- and divergence-freedom of GPU kernels written in OpenCL and CUDA.labirinthus: This is a simple videogame developed for an university project. I've not the rights of media contents, I used them only for academic purpose. LFS ERP: My First Open Source Systemmangopollo: Mangopollo* will allow you to easily take advantage of new windows phone 8 tiles (cyclic, flip, iconic) and of new launchersMediaAutomator: This project was created in order to provide an automation for media files (videos, music, etc)P-ZPP_ATH_2B: Oto wymyslny i jakze przydatny program utworzony przez grupe 2 b na Czele Radoslawa BuryRemote domain rename: A graphical front-end for Microsoft's netdom utility that allows users to batch rename domain computers.Simple Trading Platform: This project is aimed at providing meaningful trading information including feedback and managed conversations to all traders in an easy to use manner.Software41: Still deciding on what our projects main goal isSqlCondition for the CapableObject's ECO framework.: ECO is a tool for Domain Driven Development from Capable Objects (www.capableobjects.com). ECO uses OCL for loading objects from the database backend. Loading objects by SQL is currently not supported. This project aims to fill that gap, until ECO provides that support.Streamlet Website: This is my own website for personal use.Symmetry XAML Plugins (Osiris Release): Got a bug you just can't crack? Want to automate or customize something but the team will howl at you for checking it in? Symmetry Plugins to the rescue!!!TOP TECHNOLOGIES Learn & Research Labs: At TOP TECHNOLOGIES we are constantly researching awesome and thrilling topics and decided to share our knowledge with the community.UiAutomationExtension: UI Automation ????????????????????。What's Happening Tag Cloud: Web site that creates tag cloud for multiple words. The weight or occurences of this word is responsible for the font size. Position and color are random.?????????: ?????????????: ???? Windows Phone ????，?????，?????????WebService Api，?????wap.10010.com???????。

  Read the article

• CodePlex Daily Summary for Thursday, November 08, 2012

  CodePlex Daily Summary for Thursday, November 08, 2012Popular ReleasesPlayer Framework by Microsoft: Player Framework for Windows 8 (v1.0): IMPORTANT: List of breaking changes from preview 7 Ability to move control panel or individual elements outside media player. more info... New Entertainment app theme for out of the box support for Windows 8 Entertainment app guidelines. more info... VSIX reference names shortened. Allows seeing plugin name from "Add Reference" dialog without resizing. FreeWheel SmartXML now supports new "Standard" event callback type. Other minor misc fixes and improvements ADDITIONAL DOWNLOADSSmo...P1 & S0 Port monitoring with Netduino Plus: V0.6.1 Beta Netduino Plus Monitoring: Sixth public version V0.6.1 Bugfix in the temperature module (wrong calculation)WebSearch.Net: WebSearch.Net 3.1: WebSearch.Net is an open-source research platform that provides uniform data source access, data modeling, feature calculation, data mining, etc. It facilitates the experiments of web search researchers due to its high flexibility and extensibility. The platform can be used or extended by any language compatible for .Net 2 framework, from C# (recommended), VB.Net to C++ and Java. Thanks to the large coverage of knowledge in web search research, it is necessary to model the techniques and main...SQLite for Excel: SQLite for Excel Version 0.9: Added support for sqlite3_open_v2 to allow opening of database as read-only.MySQL Tuner for Windows: 0.3: Welcome to the third beta of MySQL Tuner for Windows! This release fixes bugs in the displaying of numbers, and a crash that occurred due to the program incorrectly closing and disposing of resources, Be warned that there will be bugs in this release, so please do not use on production or critical systems. Do post details of issues found to the issue tracker, and I will endeavour to fix them, when I can. I would love to have your feedback, and if possible your support! Requirements Microso...SharePoint Manager 2013: SharePoint Manager 2013 Release ver 1.0.12.1106: SharePoint Manager 2013 Release (ver: 1.0.12.1106) is now ready for SharePoint 2013. The new version has an expanded view of the SharePoint object model and has been tested on SharePoint 2013 RTM. As a bonus, the new version is also available for SharePoint 2010 as a separate download.D3D9Client: D3D9Client R7: New release for Orbiter 2010-P1 - Added horizon/sun angle for night-lights into the configuration file (default 10deg) - Some runway lights related bugs are fixed - Added more configuration options for runway lightsFiskalizacija za developere: FiskalizacijaDev 1.2: Verzija 1.2. je, prije svega, odgovor na novu verziju Tehnicke specifikacije (v1.1.) koja je objavljena prije nekoliko dana. Pored novosti vezanih uz (sitne) izmjene u spomenutoj novoj verziji Tehnicke dokumentacije, projekt smo prošili sa nekim dodatnim feature-ima od kojih je vecina proizašla iz vaših prijedloga - hvala :) Novosti u v1.2. su: - Neusuglašenost zahtjeva (http://fiskalizacija.codeplex.com/workitem/645) - Sample projekt - iznosi se množe sa 100 (http://fiskalizacija.codeplex.c...PowerComboBox: PowerComboBox VB v1.0: Visual Basic source code class file.Edi: Themable Edi: Completed ExpressionDark theme Improved Error Handling and Reporting feature Refactored all views to be look-less controlsMFCMAPI: October 2012 Release: Build: 15.0.0.1036 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeMCEBuddy 2.x: MCEBuddy 2.3.7: Changelog for 2.3.7 (32bit and 64bit) 1. Improved performance of MP4 Fast and M4V Fast Profiles (no deinterlacing, removed --decomb) 2. Improved priority handling 3. Added support for Pausing and Resume conversions 4. Added support for fallback to source directory if network destination directory is unavailable 5. MCEBuddy now installs ShowAnalyzer during installation 6. Added support for long description atom in iTunesFoxyXLS: FoxyXLS Releases: Source code and samplesProDinner - ASP.NET MVC Sample (EF4.4, N-Tier, jQuery): 8: update to ASP.net MVC Awesome 3.0 udpate to EntityFramework 4.4 update to MVC 4 added dinners grid on homepageASP.net MVC Awesome - jQuery Ajax Helpers: 3.0: added Grid helper added XML Documentation added textbox helper added Client Side API for AjaxList removed .SearchButton from AjaxList AjaxForm and Confirm helpers have been merged into the Form helper optimized html output for AjaxDropdown, AjaxList, Autocomplete works on MVC 3 and 4BlogEngine.NET: BlogEngine.NET 2.7: Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.7 instructions. If you looking for Web Application Project, ...Launchbar: Launchbar 4.2.2.0: This release is the first step in cleaning up the code and using all the latest features of .NET 4.5 Changes 4.2.2 (2012-11-02) Improved handling of left clicks 4.1.0 (2012-10-17) Removed tray icon Assembly renamed and signed with strong name Note When you upgrade, Launchbar will start with the default settings. You can import your previous settings by following these steps: Run Launchbar and just save the settings without configuring anything Shutdown Launchbar Go to the folder %LOCA...Mouse Jiggler: MouseJiggle-1.3: This adds the much-requested minimize-to-tray feature to Mouse Jiggler.Umbraco CMS: Umbraco 4.10.0 Release Candidate: This is a Release Candidate, which means that if we do not find any major issues in the next week, we will release this version as the final release of 4.10.0 on November 9th, 2012. The documentation for the MVC bits still lives in the Github version of the docs for now and will be updated on our.umbraco.org with the final release of 4.10.0. Browse the documentation here: https://github.com/umbraco/Umbraco4Docs/tree/4.8.0/Documentation/Reference/Mvc If you want to do only MVC then make sur...Skype Auto Recorder: SkypeAutoRecorder 1.3.4: New icon and images. Reworked settings window. Implemented high-quality sound encoding. Implemented a possibility to produce stereo records. Added buttons with system-wide hot keys for manual starting and canceling of recording. Added buttons for opening folder with records. Added Help button. Fixed an issue when recording is continuing after call end. Fixed an issue when recording doesn't start. Fixed several bugs and improved stability. Major refactoring and optimization...New Projects.Net Streamer: With .Net Streamer you can easily view and download series from watchseries.eu/gorillapod.in You can also download and display subtitles along with the video.Boards And Commissions: In accordance with Va. Code § 2.2-2822(B)(1), VITA has released the code for the CRM OASYS system and the OASYS portal to the public domain on CodePlex. The folcces: Center for Complex Engineering Systems codebase for Kail: Fornt-end code including javascript css html xsltdbSend: Simple tool for uploading large files, such as databases, to a remote SFTP server.DNN Task Manager GOR: Summary.Drive Watcher: Drive Watcher windows application in .net framework 4. watch the chosen path for any changeDSLPed: DSLPed is a framework to design & develop WPF-based projectional editors of custom Domain Specific Lanugages as add-ins into the Visual Studio 2010 designer.FAST Corner Detector: This simple demp app takes the live camera feed, detects the FAST9 corners based on the method by E. Rosten.Inkscape 9-patch extension: This is an extension to Inkscape that makes it easier to create bitmap resources for Android apps at multiple resolutions and in nine-patch format.Inmeta Visual Studio Gallery Service: An ASP.NET Web API service for implementing a Visual Studio Private Extension Gallery.IService001: IServiceissueIT.net - ”I just found the last bug”: issueIT is the best open source web-based issue tracker for .NET. It’s easy to customize to suit your organization. This project is not finished yet - it is only at a very early stageJason WP Tools: this project consists of a number of useful utilities and extensions for developing Windows Phone (both 7 and 8) apps.LeadersGenerator: make an easy way to play Hearts of Iron3MD5FolderVerifier: A project used to verify file md5s inside a folder.Media Center Commander: Media Center Commander allows you to change Live TV channels in Windows Media Center via the command-line (and thus desktop shortcuts).My Sulekha: Its a classified basic website which contains all the data of advertisers & their advertisements Pancake Sorting PANA 2012-2: A university work about the implementation of pancakes sorting.Parallel Cache Handler for Unity: Lightweight Unity Interceptor to introduce generic caching for parallel invocationsQuizzMasterStudio V.2: A software that helps users absorb new material faster through various types of quizzes. The system also includes a mechanism to more effectively learn math.RTSparse: This is a port of CSparse to WinRT runtime component.Share: Share is a new web-based content management system. For more information about this project, please visit http://blog.aphysoft.com.SpeedDial Assistent: No summary available yetspSite.pro - Investigating SharePoint and implementing it's missing parts.: Source code storage for our collective resource about SharePoint.Sql Server Stress / Load Test tool: Some time we need to stress test SQL server. This is simple and flexible Visual Studio load test which can load your SQL server with different type of load.Statuos: Statuos is a customer driven project management solution that supports subtasks.TabManager: TabManager is a simple windows control container control and supports custom tab header sizing. TabManager is written in VB and is a new project.Tagomatique: Permet la gestion de fichiers multimédia (audio, vidéo, image) sur principe des tags, chapitres, signets.Technoera.Common FW2.0: A simple repository that contains some of our "domain-unrelated" application blocks.TestDraw: This is a test project. Written out my own interest to see if it can survive into a better project.testesunnyedm: testesunnyedmTricogolWeb: Tricogol WebWA77696A-9075-44CC-A378-D42A096D5989: Project Codename : WA77696A-9075-44CC-A378-D42A096D5989WCF y Net remoting en el famoso ejemplo HOLA MUNDO: El ejemplo ideal para entender de manera muy facil los componententes implicados en una comunicación WCF y otra .NET Remoting.. En español!Web API Tools: Project enables easy communication with ASP.NET MVC Web API.Web Application Navigator for SharePoint: For SharePoint 2010-13 : Implements a web part that supports consistent navigation across an entire web application. The navigation links are provided by a listWinRDF - RDF made easy!: Welcome to the homepage of the WinRDF project.WP728DC9-1E30-468E-A4AE-5879C6CC5BD6: Project Codename : WP728DC9-1E30-468E-A4AE-5879C6CC5BD6X3D.NET: X3D.NET is a library package providing a simple and easy way handling the Extensible 3D format (X3D) for .NET FrameworkXheis's Game Development: Xheis's game dev of a persistent zombie, waved based action RPG, RTS defenceX-tee.NET: Teeme xtee-ga suhtluse lihtsamaks

  Read the article

• Convert a cassette tape recording to digital format

  - by Optimal Solutions

  Has anyone been successful with transferring audio cassette tape recordings to a digital format? I would like to preserve old cassette tape recordings of my grandparents to some digital format: MP3, WAV, etc... The quality of the tapes are mediocre. I think I can handle the quality restoration but getting the audio from tape to digital is my question. Below is a list of the hardware that I can work with: Cassette Deck: I have a Technics stereo cassette deck model RS-B12. It has separate left and right IN and OUT RCA type jacks on the back. In the front it has a headphone phono jack, plus left and right mic input phono jacks. On the computer side: -I have a Windows Vista PC with no additional software other than what came with the machine from Costco. No sound editing software that I can see. There is no sound card on the PC. On the front panel there is a mini-phono mic input jack and there are several different types of in/out mini-phono jacks on the back. In addition, USB and Firewire. I also have access to a new (2009) iMac with a mini-phono input jack for a powered mic or other audio source and GarageBand that has come with the computer. In addition, USB and Firewire. What are my options for getting these cassette recordings into a digital format? Whats the best format? What sort of wires would I need and will I want to utilize the USB or Firewire or can I simply use the audio inputs on the PC (or Mac) to receive the audio stream?

  Read the article

• VSFTPD - FTP over TLS - Upload stops after exactly 82k?

  - by Redsandro

  I installed a VSFTP daemon on a CentOS server, using a RSA certificate for logging in using explicit TLS. Now, I cannot upload more than 82k. With files under that limit, there is no problem. The FTP works like a charm. But as soon as a file reaches 82k with FileZilla (81,952 bytes to be exact), the transfer will stop, and the FTP client hangs until time out is reached. FTP client console: 15:10:21 Command: STOR jquery-1.7.2.min.js 15:10:21 Response: 150 Ok to send data. 15:11:21 Error: Connection timed out 15:11:21 Error: File transfer failed after transferring 82 KB in 60 seconds /var/log/vsftpd.log FTP command: Client "x.x.x.x", "STOR jquery-1.7.2.min.js" FTP response: Client "x.x.x.x", "150 Ok to send data." OK UPLOAD: Client "x.x.x.x", "jquery-1.7.2.min.js", 81952 bytes, 1.32Kbyte/sec FTP response: Client "x.x.x.x", "226 File receive OK." // NOT okay, file is bigger // No mention of error here I cannot find relevant info about this problem, apart from a possible problem with trans_chunk_size (not mentioned in default config), but I tried different sizes and it has no impact on the problem. trans_chunk_size=4096 trans_chunk_size=8192 trans_chunk_size=9999 Ofcourse, after every configuration change, I restarted the server: /etc/init.d/vsftpd restart What else can cause this? It's not the latest version, but it's the latest update within the repositories that has been deemed fit for enterprise usage: Package info: $ yum info vsftpd Loaded plugins: fastestmirror Installed Packages Name : vsftpd Arch : x86_64 Version : 2.0.5 Release : 24.el5_8.1 Size : 286 k Repo : installed Summary : vsftpd - Very Secure Ftp Daemon URL : http://vsftpd.beasts.org/ License : GPL Description: vsftpd is a Very Secure FTP daemon. It was written completely from scratch.

  Read the article

• Per connection bandwidth limit

  - by Kyr

  Apparently, our server box running Windows Server 2008 R2 has a per connection bandwidth limit of 0.2 MB/s. Meaning, while one TCP connection can pull at max 0.2 MB/s, 60 parallel connections can pull 12 MB/s. We first noticed this when trying to checkout large SVN repository from this server. I used a simple Java application to test this, transferring data from server to workstation using variable number of threads (one connection per thread). Server part of the application simply writes 1 MB memory buffer to socket 100 times, so there is no disk involvement. Each connection topped at 0.2 MB/s. Same per connection limit was for only one as was for 60 parallel connections. The problem is that I have no idea from where this limit comes from. I have very little experience administrating Windows Server, so I was mostly trying to find something by googling. I have checked the following: Local Computer Policy QoS Packet Scheduler Limit reservable bandwidth: it's Not configured; Group Policy Management Console: we have two GOPs, but neiher has any Policy-based QoS defined; There isn't any bandwidth limiter program installed, as far as I can tell. We're using standard Windows Firewall. I can update this question with any additional information if needed.

  Read the article

• When did my LaTeX files become TeX files!?

  - by andrz_001

  After transferring all my files onto a new machine, all files that were once LaTeX files (having the texnic center "T" icon) are now TeX files (having the TeX works icon --I don't remember installing that one!). But....the files are associated with the technic center! In other words, the files open with the texnic center, yet the "type of file" is "tex document". I'm using the same miktex distrubution and texnicCenter (both for windows xp) as on the old machine. Again, I don't know how/where I got this texworks on the new machine--assuming it came with windows. A question: Could these tex associations cause me any new surprises, anything unexpected? Like certain packages not working, etc? Because I can't have that!! Should I not fix it if it ain't broken!? For instance, one particular file yesterday would not produce any pdf output after compiling...after trying many things (other files compiled as they should have), I got to thinking to try it without the setspace for doublespacing!! And it worked. I have no idea why. Anyway.... Real question: How to revert to LaTeX file associations?? Rhetorical question: Would this question have better luck in ctan or stackoverflow? I guess I'll find out! Thank you wholeheartedly!

  Read the article

• How to prioritize openvpn traffic?

  - by aditsu

  I have an openvpn server, with one network interface. VPN traffic is extremely slow. I tried to do traffic control with this configuration (currently): qdisc del dev eth0 root qdisc add dev eth0 root handle 1: htb default 12 class add dev eth0 parent 1: classid 1:1 htb rate 900mbit #vpn class add dev eth0 parent 1:1 classid 1:10 htb rate 1500kbit ceil 3000kbit prio 1 #local net class add dev eth0 parent 1:1 classid 1:11 htb rate 10mbit ceil 900mbit prio 2 #other class add dev eth0 parent 1:1 classid 1:12 htb rate 500kbit ceil 1000kbit prio 2 filter add dev eth0 protocol ip parent 1:0 prio 1 u32 match ip sport 1194 0xffff flowid 1:10 filter add dev eth0 protocol ip parent 1:0 prio 2 u32 match ip dst 192.168.10.0/24 flowid 1:11 qdisc add dev eth0 parent 1:10 handle 10: sfq perturb 10 qdisc add dev eth0 parent 1:11 handle 11: sfq perturb 10 qdisc add dev eth0 parent 1:12 handle 12: sfq perturb 10 But it's still extremely slow. I have an imaps connection that keeps transferring data continuously (I successfully limited the rate) but with openvpn I can't seem to get more than about 100kbit/s The internet connection speed is about 3mbit/s (symmetric) What could be the problem? Does the sport filter work for udp?

  Read the article

• Access Existing Linux Installation from Windows Bootloader - Linux Installed and Then Windows 7

  - by nicorellius

  My hard drive is failing. I installed a new drive, and the installed Ubuntu 12.04 to try to rescue data. Realized that I wanted to install Windows and just access drives without transferring data (there are loads of it). I then installed Windows 7. Now my drive only boots to Windows 7. How do I access Linux and make Windows boot-loader load Linux? I originally thought I would just not use the Ubuntu installation but now I think I want it to be a dual boot system. What are good boot-loaders to install for this kind of dual boot situation? Can I accomplish this with BCDEdit? If I would have done this the other way (Windows first, then Linux) everything would be fine, but I didn't and now I'm trying to fix this. The problem I have is that I don't really know how to boot into Linux to retrieve any files I need. I guess using the disc would work, but I'm not sure how to go about this.

  Read the article

• Asus K55VM usb 3.0 issue

  - by user2141481

  Good day superusers! I own the above laptop and I found out that there are some unknown and unusual issues with usb 3.0 ports. I haven't noticed anything strange until now. I got a new toshiba usb 3.0 external hdd and when I try to copy larger amount of data from my disk to the external hdd, the OS(windows 7) randomly starts ignoring the external hdd. It doesn't shut it down, it kinda just stops responding but the light on the hdd is still lit. I get an error that the files cannot be copied. I have reinstalled windows 7, installed all drivers(including intel chipset drivers of course) and the issue is still present. It acts normal when copying small amount of data. Also, I heard that some intel chipsets have an issue with usb, something about the connectors not transferring power when the usb device enters some kind of "low power mode" causing the device to stop responding and you need to plug it out and in again. But the thing is, my Intel® Chief River Chipset HM76 is not on the list of affected hardware(not ENTIRELY sure though). If anyone has any idea of what the problem to this might be, I'd be greatful. Edit: The hdd works perfectly fine even for large amounts of data if plugged in the usb 2.0 port!

  Read the article

• Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

  - by WerkkreW

  Hello - I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified with SpeakEasy and Speedtest.net) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

  Read the article

• How do I repair my Logitech Anywhere MX?

  - by Stefano Palazzo

  My Anywhere Mouse has got mushy mouse button syndrome. That is, the left mouse button feels a little bit soft, and it easily double clicks, let's go when I drag something. Before I repair it at home, rather than bringing it to the store (I kind of need it, it's the only one I have), I'd like to know exactly what I'm doing. It'd be too bad if I tried to repair it, voided the warranty and didn't succeed. I'm guessing there are screws to open it under the rubber pads. And I suppose I can take those off without breaking them, and put them back on without bending them. How is this mouse held together, and what's the safest way to open it? Once I have it open, will I be able to fix the problem? What's causing the mushy mouse button? Here's what I know so far: It might be the switch itself that's broken, in which case I shouldn't open it (I can't get a replacement, voiding the warranty to "have a look" seems pointless) If there are screws underneath the rubber pads, they're only on the 'front', the back two thirds of the mouse are all battery cover: There's nothing I can see under the batteries either. In the mouse I had before this one, there were sort of springy things connecting the actual button with the switch soldered to the board. They were just lying inside of a bit of plastic, and I could swap the left and right ones easily. If repairing it is more difficult, transferring the problem to the right mouse button would be a very good start.

  Read the article

• Backing up large network (~200 clients) -- Enough Bandwidth?

  - by mtkoan

  My company wants to institute a backup plan for all of the clients on our network, which is about 200. We back up our servers and SQL databases regularly, but its been our policy to not backup individuals. What is most critical for people is their Documents and PST files in Outlook. PST files can be very large, and most people's are ~1-1.5 GB around here. So with PST files alone that is 200-300 GB of data needing to be transferred daily to a sever for backup. Or compressing first, then transferring, but many of the machines are VERY old and such a task would grind their computer to a halt. Isn't this the reason networks use things like VMware -- to reduce network traffic and streamline backups? Or is this only to reduce hardware costs? Would this much network traffic everyday drastically slow down our network? Enough to the point we'd have to mandate it to be done at night only? Or could we stagger then through out the day? Really appreciate any input, thank you.

  Read the article

• NTBackup (on WS2k3) fails to backup remote server (WS2k8R2) with " Error: is not a valid drive, or you do not have access."

  - by Mark A

  We run an NTBackup job on a Windows Server 2003 R2 SP2 with all updates (as of Q4-2011). It works well backing up two WS2k3 servers as well as the backup server itself. However, we have been unable to successfully back up our Windows Server 2008 R2 machine ("G5-01"). It often runs for about 2GB worth of backup and then dies out with one of the below error messages. It should be more like 20GB for the full server. We have tried using the admin share (C$), an explicitly shared drive share, UNC and mapped drives. The result is the same each time, the only thing that varies is the amount of stuff backed up before it chokes. We've also run NTBbackup from the UI interface, from the command line and as a scheduled task. We are backing up to 400/800GB tapes and they have plenty of space available on them (blank media). Error: \\G5-01\c is not a valid drive, or you do not have access. Error: \\G5-01\c$ is not a valid drive, or you do not have access. Error: Y: is not a valid drive, or you do not have access. Error: Could not access or create backup catalog files. Verify that you have full access to the working folder and there is disk space available. The job is run as Administrator and we have no problems logging onto the server and transferring files. The Event Log on the WS2k8 is not much help, as it has success audits for each login. All of the hardware involved (HP DL360 G3, HP LTO Ultrium 3, Adaptec 39320A) has the latest supported drivers. We've seemingly tried a bunch of different options but are wondering where to look next to resolve the backup issue. We've been super happy with our reliable schedule task for years but this one is stumping us!

  Read the article

• Suddenly can't send E-Mails with Apple Mail to Gmail SMTP

  - by slhck

  Hi all, I have a weird problem that started just today. I am using Apple Mail on a Leopard machine, connecting to Gmail. Fetching e-mail works just fine. My SMTP settings are also correct. Still, I can't send mail, it will display a pop up saying that "transferring the content to the mail server" failed (translation from German, could be different in English OS X versions). I have verified the following: My SMTP settings are definitely correct. I have not changed them and the issue appeared today. Also, I went through the Apple online configuration for Gmail accounts and did not have to adjust any setting. I can run network diagnosis and it will connect to both POP and SMTP servers without a problem (all green lights) The Telnet details will show me the HELO message from the Gmail servers, so there's no authentication failure. Console.app will not show any messages related to "mail" when I try to send the mail, so there's no specific error message The mail I'm trying to send does not have an attachment, it is plaintext only I can login to gmail.com and send mails without a problem The recipient address exists and contains no syntax errors I can also not send mails to myself When using another IP and ISP (through VPN), it still doesn't work As for my settings: I connect to smtp.gmail.com and for advanced settings I choose password-based authentication with user: [email protected] and my password. I let Apple Mail try the default ports (for SSL and TLS, respectively). Again: I have not changed a thing between yesterday and today. What is causing that strange behavior? Any help would be much appreciated.

  Read the article

• Slow Local Network, Windows 7, Snow Leopard, WiFi/Wired

  - by WerkkreW

  I am experiencing really poor local network performance in my home. I was recently using a Linksys WRT54G Router with DD-WRT on it, and a couple comparable Linksys-G PCI cards for connectivity but decided to upgrade hoping it would help with my performance issues. The computers in my house are connected as follows: Comcast Business Class Commercial 25mbps/10mbps (Verified) D-Link DGL-4500 Wireless N Router Windows 7x64 - D-Link DWA-552 Wireless-N Windows 7x64 - D-Link DWA-552 Wireless-N Mac Mini 10.6.2 - AirPort Extreme N Playstation 3, Hard Wired Xbox 360, Hard Wired Essentially the problem is very specific. Web browsing and uploading/downloading files from the internet is fine, more than fine. But if I want to say, Stream a video from one of my Windows 7 computers to my PS3, or copy a large video file between either of the PC's or the Mac, I get a consistent 500-900Kbps throughput at the high end. If I open my network browser, or try to browse my homegroup the response time is horrible. Both of my Windows computers are showing Strong wireless signals with a connection speed of 300Mbps. I know I can never expect to achieve anything near those speeds, but 500Kbps? Here is what I have tried so far: Enabled Single mode N-only and N/G Only on router WPA2 with AES Encrpytion Disabled "Remote Differential Compression" in Windows 7 Disabled TCP "Auto-Tuning" Used other software for file copies such as "Teracopy" I am at the end of my rope. Unfortunately I live in a 75 year old home with plaster walls, so hard-wiring my entire house isn't really an option I can handle right now. Any ideas to help me get decent speed when transferring files across my network would be greatly appreciated.

  Read the article

• Server 2008 RAID 5 Write Speeds

  - by Solipsism

  I recently configured a RAID 5 partition in Server 2008 with 4 RAID 5 disks. These disks are connected through a SATA expansion card that uses PCIe. This morning, I checked and they had finally finished synchronizing, and so I tried to do some speed tests. Copying off the disks started pretty much fine - speeds began at 125MB/s, then trailed down to about 70MB/s, which I found odd but not worrying. Writing TO the disks however is a completely different story. I attempted to copy some of my VM host ISOs onto the disks (~2-4 GB apiece) and this resulted in speeds of approximately 10MB/s. I tried copying both from a local disk (connected directly to the motherboard) and from another server ththe gigabit network and results were the same. I checked the performance monitor while transferring the files and the only thing that stuck out was that my memory hard faults shot up to 6,000 per minute (spiking around 200/s) by explorer.exe. The system is running 2GB of DDR667 ECC RAM and a quad-core 2.3GHz opteron. Is there anything I can do to fix this performance issue (buy more RAM? move the drives to a faster box?, etc) or am I just screwed so long as I stick to windows.

  Read the article

• Autounmounting USB keys with FAT filesystem on Linux (RHEL5)

  - by niXar

  For security reasons, I have two workstations i front of me, and I can only transfer data between them through a USB key. As you can imagine, it can get quickly tiresome, but the most annoying is having to unmount the things before removing them. Not umounting them results in missing files most of the time, even if I remove them a while after having last written to them. Now, since they're only used for transferring smallish files, and each are basically written once and read once, I don't need the fancy pansy caching infrastructure that makes clean unmounting a necessary step. And since the data is always a copy of something I have at hand, I don't care if the filesystem croaks from time to time. But anyway the system doesn't need to force that on me, it could simply make sure everything is committed with a second, and works synchronously. Then when I remove the key, nothing is lost. Is there a way to do this? I would appreciate any other tips on handling this situation. Edit: it appears the situation has changed between RHEL5 and Fedora up to F11 on one hand, and F12 on the other. The latter use DeviceKit-disk, and I haven't quite figured out how to do this. The method provided below in gconf does not work anymore.

  Read the article

• High speed network configuration

  - by Peter M

  Sorry if this seems to be a stupid question, I'm not sure how to specify what I want to know when checking google. I will have 2 or 3 devices pumping out data on a 100Base-T port. The combined data rate of all devices is about 15KB/S which exceeds the optimal 100Base-T channel capacity (12KB/S), but well within the realms of a 1000Base-T connection. Each device will be sending a burst of data in the form of an FTP transfer to a common, single host computer in a sequential manner ie: Device A establishes FTP connection and transfers data Device B establishes FTP connection and transfers data Device C establishes FTP connection and transfers data It may be that the A&B, B&C and C&A transfers overlap in the time domain to some extent. There will be minimal traffic going back from the computer to each device (in general what ever is needed to support the FTP transfers), and the network will be dedicated to transferring data between these devices and the host computer. Is it possible to use a switch to combine the multiple incoming 100Base-T streams into a single outgoing 1000Base-T stream? if so what features in a switch should I be looking for? Or would it be better to have 3 physical point-to-point 100Base-T dedicated connections between each device and the host computer? (thus having at least 3 physical Ethernet interfaces on that computer) Note that I can't change the interface on the devices, but I am free to choose the network and host computer configuration. Thanks for you help Peter

  Read the article

• SQL Server 2005 to 2008 DB attach elp please!

  - by Brandon

  I have SQL Server 2005 Standard on my personal machine. I created a very big DB about 21 gb. I made a backup and transferred the .bak file via an ftp program to my dedicated server. I have SQL Server 2008 Enterprise Edition on my dedicated server. I tried restore the transferred .bak file but got an error. I posted the error on here and was told the database is corrupt. How? I don't know. The connection was not interrupted during the ftp transfer. The DB works on my own machine. So then I detached the db on my own machine and transferred the mdf and ldf file to my dedicated server through ftp again and again there were not interruptions. Now I try to attach the db and get this error: The header for file 'DB.mdf' is not a valid database file header. The FILE SIZE property is incorrect. (Microsoft SQL Server, Error: 5172) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.00.1442&EvtSrc=MSSQLServer&EvtID=5172&LinkId=20476 I already wasted 21 gb transferring the .bak file. Now I used another 21 to transfer mdf and additional ldf file. Please tell me there's a solution. The db can detach and attach fine on my machine in sql server 2005 but not SQL server 2008 on my server.

  Read the article

• Convert MPG w/ AC3 audio to something else - on a Mac

  - by anonymous coward

  I'm helping with a small volunteer media team, and they have several .mpg videos that don't appear to have sound when played in QuickTime, iTunes, Real Player, etc, on the local Mac machine. I was able to hear audio after transferring one of the movies to a Windows machine that had VLC media player on it. Through VLC I was able to discover that the audio stream is a52 / AC3 format. We use Autodesk Cleaner in our normal workflow of converting the format of our videos to FLV, but for some reason it's unable to convert this particular batch of videos (well, the video converts fine, but with no audio). Obviously, it seems that there's a codec issue here, but I'm not sure how to correct it. (I'm not extremely familiar with Macs, and/or Autodesk Cleaner). I've seen the Perian codec pack, but I'm not sure that having the codecs on the system will enable Cleaner to convert these videos (particularly the audio stream, since the video converts fine). Is there something obvious that I'm overlooking, or will we have to use something else for this particular batch of videos? If so, what?

  Read the article

• WD Caviar Green Extremely Slow

  - by Steven

  I am encountering a really weird problem on my WD Caviar Green HDD. Well first of all I have 2 HDDs on my Desktop, one 160GB Seagate holding my Win7 Ultimate x64 and the problematic one, WD 1.5 Caviar Green for storage purpose. My problem is kinda weird, when I transfer files from my Seagate(C:) to my WD (D:) the speed is good (50-60MB/s). Then the problem arises when I transfer too "many" large files, the transfer speed would go straight down to kilobytes/s. Well after I cancelled the transfer and access my D:, even entering a folder requires loading for like 10 seconds. Such problem not only arises when I am transferring files to my D:, it seems like my WD can't handle much activities. For instance, last time I installed my game on D: and I would face much lag after playing for some time. When the same game is installed on C: no problem arises. Does anyone knows what is the problem? P/S: There was one temporary solution that I used to tried. After the "situation" occurs, I tried to access as many folders on D: as I can and let it load, repeating such actions and giving it some time bring the D: back to speedy transfer. However, large transfers would causes the situation to happen again. Does it have something to do with cache whatsoever?

  Read the article

• Copied a file with winscp; only winscp can see it

  - by nilbus

  I recently copied a 25.5GB file from another machine using WinSCP. I copied it to C:\beth.tar.gz, and WinSCP can still see the file. However no other app (including Explorer) can see the file. What might cause this, and how can I fix it? The details that might or might not matter WinSCP shows the size of the file (C:\beth.tar.gz) correctly as 27,460,124,080 bytes, which matches the filesize on the remote host Neither explorer, cmd (command line prompt w/ dir C:\), the 7Zip archive program, nor any other File Open dialog can see the beth.tar.gz file under C:\ I have configured Explorer to show hidden files I can move the file to other directories using WinSCP If I try to move the file to Users/, UAC prompts me for administrative rights, which I grant, and I get this error: Could not find this item The item is no longer located in C:\ When I try to transfer the file back to the remote host in a new directory, the transfer starts successfully and transfers data The transfer had about 30 minutes remaining when I left it for the night The morning after the file transfer, I was greeted with a message saying that the connection to the server had been lost. I don't think this is relevant, since I did not tell it to disconnect after the file was done transferring, and it likely disconnected after the file transfer finished. I'm using an old version of WinSCP - v4.1.8 from 2008 I can view the file properties in WinSCP: Type of file: 7zip (.gz) Location: C:\ Attributes: none (Ready-only, Hidden, Archive, or Ready for indexing) Security: SYSTEM, my user, and Administrators group have full permissions - everything other than "special permissions" is checked under Allow for all 3 users/groups (my user, Administrators, SYSTEM) What's going on?!

  Read the article

< Previous Page | 293 294 295 296 297 298 299 300 301 302 303 304  | Next Page >