Search Results

Search found 12328 results on 494 pages for 'cool features'.

Page 298/494 | < Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >

  • Does anyone know where I could find a 2 input USB voltage meter?

    - by John O
    What we really need is a tiny UPS, of sorts. We'll be hooking up a solar cell and a battery to a single board computer. Currently, that SBC is a custom Pic32 device, and it does it's own UPS and voltage monitoring duties. I've been tasked with trying to replicate all of its features with off the shelf products... and for the most part I've succeeded. But I don't currently have any way to switch between two sources of juice, or monitor when they're getting low. These guys have something: http://www.mini-box.com/picoUPS-100-12V-DC-micro-UPS-system-battery-backup-system I really like it, the price is well within the budget. We might even work it in though it does 12V and I'll probably be using 5V... there are enough engineers on hand to figure out something. But I'd still have no idea what the voltage was for the PV or battery. I was hoping that there was some simple little USB multimeter thing that I could use to monitor this with, but I can't seem to come up with anything. I've found all sorts of cool hardware, but nothing that will help us. Does anyone know of anything?

    Read the article

  • What are my options in replacing the noisy fan in my Linksys Cisco SRW2008P managed GigE switch?

    - by Fred Sobotka
    My first managed GigE switch, the Linksys SRW2008, was a dream, until it started randomly chattering on various ports. That started while I was on the road all the time, which made it take forever to diagnose, but that's a different problem. When I finally determined that the switch was bad, it was still covered by warranty by Linksys/Cisco, so I opened an RMA ticket and returned it. Unfortunately, Linksys/Cisco "upgraded" my replacement switch to a SRW2008P, which has Power over Ethernet features I never planned on using. That by itself wasn't so bad, but it's my guess that the inclusion of PoE functions in this model required a tiny, super-loud internal fan to keep everything cool. This wasn't something I wanted or asked for, but, now that I am stuck with it, I am investigating options for replacing that little internal fan with something far quieter. For example, if I attach a larger fan to the outsite of the chassis, I think it could push enough air to replace the stock fan that is currently there. Any advice on carrying this out? I have no interest in melting my switch due to insufficient ventilation.

    Read the article

  • Can Windows Media Player create playlists based on folder structure?

    - by Chaulky
    Over the years I've carefully molded my digital media collection into a series of folders that make it easy for me to find what I'm looking for. I recently discovered the awesomeness that is streaming video from Windows 7 Media Player to the PS3 so I can watch it on the big screen without all the hassle of hooking the computer up to the TV. The problem is, I totally lose my carefully crafted folder structure and all my videos become one giant mess again... not cool! As a temporary solution, I've created a few playlists for my favorites (Dexter Season 4, Dexter Season 5, Breaking Bad Season 1, etc.). This is a HUGE pain in the a$$. So, is there a way to get Windows Media Player (on Windows 7) to maintain some sort of folder structure based on the location of the actual video files? So if I have my videos sorted into folders by show and season, Media Player will pick that up and let me browse it in the same way. As an alternative answer, I'll accept suggestions for a program that can also stream to PS3 and has this "folder organization" feature.

    Read the article

  • mysqldump --where with = operator doesn't get all rows = - Help!

    - by JonathanLIVE
    I have a situation with a particular table that now thinks it contains 4 Petabytes of data. I know that sounds cool, but I assure you, it is only on a 60GB partition. This table has 9 fields in it. One of them is a domain_id field. It is the best field to identify the rows by, as there are only approximately 6300 of them. The only other field option to match has over 2million records, and thats just more difficult. I cannot do a straight mysqldump because it will attempt to output all 4PB of data and fill the drive long before it gets close to that, so I need to surgically remove the good stuff, destroy the db, and recreate it. I believe if I can do a dump for each domain_id record, then I will get most of the usable data out of it. This is what I am trying to use: mysqldump -u root --skip-opt -q --no-create-info --skip-add-drop-table --max_allowed_packet=1000000000 database table --where="domain_id=10" domains10.sql Using this I expect every row with the domain_id 10 to be exported. However, when I check the export, I am only getting 1 row, when however I look at the db, there are many many rows. It is as though the operator just finds one, then gives up. I have tried various operators. Using the < or I am able to get more of the data, but the export stops short at certain rows where the data has been compromised. With over 6000 to go through, I can't narrow down which rows are being affected in the export easily enough. So, what I need is an operator that will basically do what I thought = would do, simply give me an export of all records that match the specific field. Also note, the only way I got this DB even accessible is through an innodb force recovery 3. So I need to get this right, because after this is done, I have to drop the db in order to make mysql functional again. Looking forward to any helpful answers.

    Read the article

  • Nginx Config - I can't access WordPress admin area

    - by WebDevDude
    I am a complete noob when it comes to Nginx, but I'm trying to make the switch over for my WordPress site. Everything works, even the permalink, but I can't access my WordPress admin directory (I get a 403 error). I have my WordPress install in a subfolder, so that complicates things a bit for me. Here is my Nginx config file: server { server_name mydomain.com; access_log /srv/www/mydomain.com/logs/access.log; error_log /srv/www/mydomain.com/logs/error.log; root /srv/www/mydomain.com/public_html; location / { index index.php; # This is cool because no php is touched for static content. # include the "?$args" part so non-default permalinks doesn't break when using query string try_files $uri $uri/ /index.php?$args; } location /myWordpressDir { try_files $uri $uri/ /myWordpressDir/index.php?$args; } location ~ \.php$ { include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /srv/www/mydomain.com/public_html$fastcgi_script_name; fastcgi_split_path_info ^(/myWordpressDir)(/.*)$; } location ~* ^.+\.(ogg|ogv|svg|svgz|eot|otf|woff|mp4|ttf|rss|atom|jpg|jpeg|gif|png|ico|zip|tgz|gz|rar|bz2|doc|xls|exe|ppt|tar|mid|midi|wav|bmp|rtf)$ { access_log off; log_not_found off; expires max; } }

    Read the article

  • RSS "Newspaper" / Google Reader replacement

    - by Sean D
    With the impending demise of Google Reader I've been looking at ways to replace it. I've decided that what might be cool is to get an email every morning, with all the updates from the last twenty-four hours, maybe in the style of a newspaper. That's not a very original idea, since sites like http://fivefilters.org/pdf-newspaper/ and http://feedjournal.com/ already do this, but they both have various drawbacks. In particular both require a single feed, will just take the last n items, and clicking around on their website. The Pro option for feedjournal seems almost like it would do the job, but the project seems to be dead, and there's no way to buy it. Before I hack together something crazy I'd like to know if there's a better solution to my problem. In short: I want to replace Google Reader with a daily pdf email, how should I do this? edit: I didn't award the bounty because nobody solved the problem (not that I'm assuming it has a solution). Answers like "well for the way I do things this wouldn't work" aren't actually helpful, even if they are well-meaning.

    Read the article

  • Can I select which folders the Photos live tile chooses from?

    - by nhinkle
    The built-in Photos app in Windows 8 has a live tile on the start screen that shows photos from your pictures library. It's a cool little visual, even if it's not particularly useful. The problem is that a lot of image files on my computer are not really photos per se -- I have a lot of screenshots, PNGs of technical drawings, graph images, etc. Those all look pretty awkward on the start screen. I look pretty awkward on the start screen too... sometimes photos like resume profile shots show up that I don't want to delete, but they're not really what I want to be staring at when I start my computer up. I'm looking for some way to configure which folders the Photos app should look in for images to display on the live tile. That way, I could point it to some directories of pretty scenic pictures I've taken, and not have to see graphs and my own mug. For the time being, I've just disabled the live tile (right click - disable live tile), but I would ultimately like to have this functionality, just with more control over it.

    Read the article

  • Shortcuts that make using Windows easier? [closed]

    - by ekaj
    Over the years I have found out a good bit of shortcuts, all of which make using Windows that much faster and easier. I was wondering if I had missed any important ones, or ones that just saved any time. I tried to keep these relative to Windows only, as programs such as Mozilla, Photoshop, etc. bring in hundreds of other shortcuts, which do not apply to all users. These are the current ones I know: For the mouse: Scroll wheel - opens a link in IE into a new tab - closes a specific tab in IE when closed on Right click-n-drag - nifty menu to make a copy of a file or create a shortcut For the keyboard: Cntrl + Alt + Del - need this be explained? WinKey + R - opens 'Run..' WinKey + D - shows the desktop WinKey + E - opens 'My Computer' WinKey + F - opens 'Find..' WinKey + Tab - cool way to switch inbetween windows WinKey + L - locks the computer Alt + Tab - switches windows with a simple interface Alt + F4 - closes windows Alt + F - opens 'File' (Handy for things like IE if you have the menubar disabled) Cntrl + F - find text on current document Cntrl + W - closes a window, or current active tab in IE (or IE itself if only one tab) Cntrl + C - copies selected text / image Cntrl + V - pastes selected text / image So does anyone know of any more shortcuts that just make life easier? I would be much appreciative of any, and I am sure that some other users would like to know some too =]

    Read the article

  • Is there an simple but good To Do Manager app for the Mac?

    - by Another Registered User
    Every morning I think about what I am going to do today. So I take a paper and start to write things like: [ ] Call Mr. XYZ [ ] Answer Support E-Mails [ ] Reduce website header height by 20 px [ ] Create new navigation bar icons And every time I'm done with something, I paint a checkmark in this square. On paper. It would be fun to have something like this as an application. But I don't want a heavy project management tool or integration with email. It should be like download, install, use without fat configuration and steep learning curve. usually I don't schedule my to do's, I just write down every day what I want to accomplish today. For my experience it doesn't make sense to plan what to do next week, because next week everything looks totally different. Would be cool if such a simple utility exists. At the moment I try just using textEdit and deleting rows which are done. With a nice interface, this would be much more fun.

    Read the article

  • Install Peppermint OS three on Asus EeePC

    - by Kithoth
    I just had a new Asus EeePC R051CX. Out of the box, the installed OS is Ubuntu 12.04 LTS, but I am trying to install Peppermint OS three (as single boot). Problem. Once on live CD (well, live USB stick...), I'm in trouble in both following situations: Try Peppermint OS Live In this case, the first thing I get is a message reading The system is running in low-graphics mode Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself. I can solely press "return" to accept, then I have a list of 4 options to answer the question "What would you like to do?". But I simply can't do anything at this moment, except switching to console mode or rebooting (keyboard / mouse controls don't allow me to do anything else). Install Peppermint OS Something I really don't understand... it launches the Ubuntu Recovery Media (which was already installed when I received the device)! Also, it says in the bottom ERROR: This recovery media only functions on Ubuntu systems. All I can do is quit (that is, reboot). One last important thing that comes to my mind: this stick worked just fine on the other computers I've tried it on. I really hope someone could bring me the light, a friend of mine told me how cool this OS is for EeePCs. Don't want to give up! Thanks. Edit I finally could install Peppermint, but not by understanding why I couldn't do it the logical way. Instead, I reinstalled Ubuntu myself (erasing the factory one). Then, I could simply boot on my live USB and perform a fresh install of Peppermint. So, I still don't know how and why the mentioned problem occurred.

    Read the article

  • Urgent: how to deny read access to a ExecCGI directory

    - by Malvolio
    First, I can't believe that that isn't the default behavior. Second, yikes! I don't know how long my code's been hanging out there, with all sort of cool secret stuff, just waiting for some hacker who knows Apache better than I do. EDIT (and apology) Well, this is sort of embarrassing. Here's what happened: We had some Python scripts available to the web, at /aux/file.py, which were not surprisingly at /var/www/http/aux . Separately, we were running an app server and Apache proxies through at /servlets/. A contractor had constructed the WAR file by bundling up all the generated files including the Python files (which are in a directory also called aux, not surprisingly), so if you typed in /servlets/aux/file.py, the web-server would ask the app-server for it and the app-server would just supply the file. It was the latter URL that this morning I happened to type in by accident and lo, the source appeared. Until I realized the shear unlikelihood of what I had done, the situation was rating about 8.3 on the sphincter scale. After a tense half-hour or so I realized that it had nothing to do with the CGI (and that serving files that were also executable would be not only foolish but also impossible), and was able to address the real problems. So -- sorry, everybody. Let the scorn-fest commence.

    Read the article

  • Zero downtime deployment (Tomcat), Nginx or HAProxy, behind hardware LB - how to "starve" old server?

    - by alexeypro
    Currently we have the following setup. Hardware Load Balancer (LB) Box A running Tomcat on 8080 (TA) Box B running Tomcat on 8080 (TB) TA and TB are running behind LB. For now it's pretty complicated and manual job to take Box A or Box B out of LB to do the zero downtime deployment. I am thinking to do something like this: Hardware Load Balancer (LB) Box A running Nginx on 8080 (NA) Box A running Tomcat on 8081 (TA1) Box A running Tomcat on 8082 (TA2) Box B running Nginx on 8080 (NB) Box B running Tomcat on 8081 (TB1) Box B running Tomcat on 8082 (TB2) Basically LB will be directing traffic between NA and NB now. On each of Nginx's we'll have TA1, TA2 and TB1, TB2 configured as upstream servers. Once one of the upstreams's healthcheck page is unresponsive (shutdown) the traffic goes to another one (HttpHealthcheckModule module on Nginx). So the deploy process is simple. Say, TA1 is active with version 0.1 of the app. Healthcheck on TA1 is OK. We start TA2 with Healthcheck on it as ERROR. So Nginx is not talking to it. We deploy app version 0.2 to TA2. Make sure it works. Now, we switch the Healthcheck on TA2 to OK, switch Healthcheck to TA1 to ERROR. Nginx will start serving TA2, and will remove TA1 out of rotation. Done! And now same with the other box. While it sounds all cool and nice, how do we "starve" the Nginx? Say we have pending connections, some users on TA1. If we just turn it off, sessions will break (we have cookie-based sessions). Not good. Any way to starve traffic to one of the upstream servers with Nginx? Thanks!

    Read the article

  • My PC suddenly reboots

    - by ChocoDeveloper
    Yesterday I opened my PC hub (after like, 5 years) to add more RAM and a new HDD. It was full of dust and balls of fluff, so I cleaned it a bit by blowing. I also removed the fan that was attached to the motherboard (I think it's there to cool the processor) and I cleaned it also by blowing and with a paintbrush, then put it back where it was (it had 4 weird plastic screws, it wasn't easy). Then I added 2 x 2Gib of RAM (Kingston 1333MHz), and the new HDD (Western Digital Caviar Blue 1TB SATA 3). I couldn't find another wire like the one my first disk had, which was thicker, but there was one that was more flat, so I plugged it and it worked fine (I also plugged the wire that I think is for the data, which looks like many little wires glued together). I'm running Ubuntu 12.04, and in the new disk I've just installed Windows 7. Between yesterday and today, two reboots ocurred while working on Ubuntu. I haven't used Windows 7 that much so I don't know if it will happen there too. So where can I begin to debug this?

    Read the article

  • What apps can you only get on Mac and not Windows?

    - by ytk
    What apps do you absolutely have to use a Mac to run, and there are no decent Windows PC equivalent? This is not a religious war. Please be specific and practical It doesn't have to be a direct 1-2-1 comparison, but overall usefulness to the task I'll start off with a few: KeyNote -- the animations are quite cool and not available in PowerPoint iTune's photo sync -- on Windows it makes copy of all the photos you want to sync, effectively double the space taken up by your photos. On a Mac it's easier as long as you use iPhoto Keychain -- a centralized password manager tied to the OS. The benefit of this is you don't have to set a Master Password (like Firefox) which you need to enter when starting the browser. And it doesn't reveal your password (like Chrome, which makes no effort in hiding the password you have stored in Options) Time Machine -- 0-configuration backup in the background. Easy interface for restoring a file, or even just a contact in the address book. Text-to-speech -- works in any program, and sounds better than Windows computer voice Quick View -- press space bar to preview a file. Windows95 had quick view, but was removed.

    Read the article

  • Why is my HP TouchSmart tx2 1025dx shutting down?

    - by Kristy
    I'm having an issue with my HP tx2 1025dx laptop. Sometimes it will spontaneously shut itself off. First, the screen will go out. Next, the computer itself will shut down. This usually occurs when I am doing something that requires a lot of resources, but lately can happen when I am doing something as simple as using an Office app. I think it may be heat related, if I try to boot the laptop after it shuts itself down, it will shut itself down again before startup is complete. If I let it cool down for a while and then come back to it, the computer will boot properly. These shutdowns are always accompanied by high temperatures on the bottom right side, as well as the right side of the keyboard. I am using a laptop cooler with two fans, and it is not making a bit of difference. This is the second TouchSmart we have owned, the first one had the same issues, we sent it in to HP after it finally refused to reboot. They “fixed” it, and it worked fine for about a month before doing the exact same thing. Unfortunately we had bought the second one before the issues began with the original, if I had known this would be a problem, I would not have purchased another TouchSmart. This particular laptop we have had for more than a year and it didn’t start these issues until a couple of months ago. Any suggestions as to how to fix this problem?

    Read the article

  • why does my dl380 G3 crank the fan up so high (and how do i stop it?)

    - by smoofra
    I've got a HP DL380 and after I leave it on for a while it decides it needs to run the fans at a much higher speed than it did before. It's really loud and annoying. Is there any way to manually control the fan speed? Or otherwise get it to stop doing that? Thanks. edit: I guess i should have made it clear that this is a bit of a jury-rigged situation. I know the ideal solution is to put the thing in a server room with nice cool air. Unfortunately, that isn't happening. This is the sort of problem that calls for a jury rigged solution like manually setting the fan speed and accepting the fact that it's going to run hot shutting down a CPU (can i do that?) spinning down the disks when they're not in use (is that possible?) solution: Install HP's system health monitoring daemon, hpasmd. I installed it to try to figure out what was going on, and just running it fixed the problem.

    Read the article

  • Backbone.js Adding Model to Collection Issue

    - by jtmgdevelopment
    I am building a test application in Backbone.js (my first app using Backbone). The app goes like this: Load Data from server "Plans" Build list of plans and show to screen There is a button to add a new plan Once new plan is added, add to collection ( do not save to server as of now ) redirect to index page and show the new collection ( includes the plan you just added) My issue is with item 5. When I save a plan, I add the model to the collection then redirect to the initial view. At this point, I fetch data from the server. When I fetch data from the server, this overwrites my collection and my added model is gone. How can I prevent this from happening? I have found a way to do this but it is definitely not the correct way at all. Below you will find my code examples for this. Thanks for the help. PlansListView View: var PlansListView = Backbone.View.extend({ tagName : 'ul', initialize : function() { _.bindAll( this, 'render', 'close' ); //reset the view if the collection is reset this.collection.bind( 'reset', this.render , this ); }, render : function() { _.each( this.collection.models, function( plan ){ $( this.el ).append( new PlansListItemView({ model: plan }).render().el ); }, this ); return this; }, close : function() { $( this.el ).unbind(); $( this.el ).remove(); } });//end NewPlanView Save Method var NewPlanView = Backbone.View.extend({ tagName : 'section', template : _.template( $( '#plan-form-template' ).html() ), events : { 'click button.save' : 'savePlan', 'click button.cancel' : 'cancel' }, intialize: function() { _.bindAll( this, 'render', 'save', 'cancel' ); }, render : function() { $( '#container' ).append( $( this.el ).html(this.template( this.model.toJSON() )) ); return this; }, savePlan : function( event ) { this.model.set({ name : 'bad plan', date : 'friday', desc : 'blah', id : Math.floor(Math.random()*11), total_stops : '2' }); this.collection.add( this.model ); app.navigate('', true ); event.preventDefault(); }, cancel : function(){} }); Router (default method): index : function() { this.container.empty(); var self = this; //This is a hack to get this to work //on default page load fetch all plans from the server //if the page has loaded ( this.plans is defined) set the updated plans collection to the view //There has to be a better way!! if( ! this.plans ) { this.plans = new Plans(); this.plans.fetch({ success: function() { self.plansListView = new PlansListView({ collection : self.plans }); $( '#container' ).append( self.plansListView.render().el ); if( self.requestedID ) self.planDetails( self.requestedID ); } }); } else { this.plansListView = new PlansListView({ collection : this.plans }); $( '#container' ).append( self.plansListView.render().el ); if( this.requestedID ) self.planDetails( this.requestedID ); } }, New Plan Route: newPlan : function() { var plan = new Plan({name: 'Cool Plan', date: 'Monday', desc: 'This is a great app'}); this.newPlan = new NewPlanView({ model : plan, collection: this.plans }); this.newPlan.render(); } FULL CODE ( function( $ ){ var Plan = Backbone.Model.extend({ defaults: { name : '', date : '', desc : '' } }); var Plans = Backbone.Collection.extend({ model : Plan, url : '/data/' }); $( document ).ready(function( e ){ var PlansListView = Backbone.View.extend({ tagName : 'ul', initialize : function() { _.bindAll( this, 'render', 'close' ); //reset the view if the collection is reset this.collection.bind( 'reset', this.render , this ); }, render : function() { _.each( this.collection.models, function( plan ){ $( this.el ).append( new PlansListItemView({ model: plan }).render().el ); }, this ); return this; }, close : function() { $( this.el ).unbind(); $( this.el ).remove(); } });//end var PlansListItemView = Backbone.View.extend({ tagName : 'li', template : _.template( $( '#list-item-template' ).html() ), events :{ 'click a' : 'listInfo' }, render : function() { $( this.el ).html( this.template( this.model.toJSON() ) ); return this; }, listInfo : function( event ) { } });//end var PlanView = Backbone.View.extend({ tagName : 'section', events : { 'click button.add-plan' : 'newPlan' }, template: _.template( $( '#plan-template' ).html() ), initialize: function() { _.bindAll( this, 'render', 'close', 'newPlan' ); }, render : function() { $( '#container' ).append( $( this.el ).html( this.template( this.model.toJSON() ) ) ); return this; }, newPlan : function( event ) { app.navigate( 'newplan', true ); }, close : function() { $( this.el ).unbind(); $( this.el ).remove(); } });//end var NewPlanView = Backbone.View.extend({ tagName : 'section', template : _.template( $( '#plan-form-template' ).html() ), events : { 'click button.save' : 'savePlan', 'click button.cancel' : 'cancel' }, intialize: function() { _.bindAll( this, 'render', 'save', 'cancel' ); }, render : function() { $( '#container' ).append( $( this.el ).html(this.template( this.model.toJSON() )) ); return this; }, savePlan : function( event ) { this.model.set({ name : 'bad plan', date : 'friday', desc : 'blah', id : Math.floor(Math.random()*11), total_stops : '2' }); this.collection.add( this.model ); app.navigate('', true ); event.preventDefault(); }, cancel : function(){} }); var AppRouter = Backbone.Router.extend({ container : $( '#container' ), routes : { '' : 'index', 'viewplan/:id' : 'planDetails', 'newplan' : 'newPlan' }, initialize: function(){ }, index : function() { this.container.empty(); var self = this; //This is a hack to get this to work //on default page load fetch all plans from the server //if the page has loaded ( this.plans is defined) set the updated plans collection to the view //There has to be a better way!! if( ! this.plans ) { this.plans = new Plans(); this.plans.fetch({ success: function() { self.plansListView = new PlansListView({ collection : self.plans }); $( '#container' ).append( self.plansListView.render().el ); if( self.requestedID ) self.planDetails( self.requestedID ); } }); } else { this.plansListView = new PlansListView({ collection : this.plans }); $( '#container' ).append( self.plansListView.render().el ); if( this.requestedID ) self.planDetails( this.requestedID ); } }, planDetails : function( id ) { if( this.plans ) { this.plansListView.close(); this.plan = this.plans.get( id ); if( this.planView ) this.planView.close(); this.planView = new PlanView({ model : this.plan }); this.planView.render(); } else{ this.requestedID = id; this.index(); } if( ! this.plans ) this.index(); }, newPlan : function() { var plan = new Plan({name: 'Cool Plan', date: 'Monday', desc: 'This is a great app'}); this.newPlan = new NewPlanView({ model : plan, collection: this.plans }); this.newPlan.render(); } }); var app = new AppRouter(); Backbone.history.start(); }); })( jQuery );

    Read the article

  • Is there a better loop I could write to reduce database queries?

    - by dmanexe
    Below is some code I've written that is effective, but makes too many database queries. Is there a way I could optimize and reduce the number of queries but have conditional statements still be as effective as below? I pasted the code repeated a few times just for good measure. echo "<h3>Pool Packages</h3>"; echo "<ul>"; foreach ($items as $item): $this->db->where('id', $item['id']); $query = $this->db->get('items')->row(); if ($item['quantity'] > 1 && $item['quantity'] == TRUE && $query->category == "Pool Packages") { $newprice = $item['quantity'] * $query->price; $totals[] = $newprice; } else { $newprice = $query->price; $totals[] = $newprice; } if ($query->category == "Pool Packages") { echo "<li>" . $query->name . " (QTY: " . $item['quantity'] . " x = " . str_ireplace(" ", "", money_format('%(#10n', $newprice)) . ")</li>"; } else { } endforeach; echo "</ul>"; echo "<h3>Water Features</h3>"; echo "<ul>"; foreach ($items as $item): $this->db->where('id', $item['id']); $query = $this->db->get('items')->row(); if ($item['quantity'] > 1 && $item['quantity'] == TRUE && $query->category == "Water Features") { $newprice = $item['quantity'] * $query->price; $totals[] = $newprice; } else { $newprice = $query->price; $totals[] = $newprice; } if ($query->category == "Water Features") { echo "<li>" . $query->name . " (QTY: " . $item['quantity'] . " x = " . str_ireplace(" ", "", money_format('%(#10n', $newprice)) . ")</li>"; } else { } endforeach; echo "</ul>"; echo "<h3>Waterfall Rock Work</h3>"; echo "<ul>"; foreach ($items as $item): $this->db->where('id', $item['id']); $query = $this->db->get('items')->row(); if ($item['quantity'] > 1 && $item['quantity'] == TRUE) { $newprice = $item['quantity'] * $query->price; $totals[] = $newprice; } else { $newprice = $query->price; $totals[] = $newprice; } if ($query->category == "Waterfall Rock Work") { echo "<li>" . $query->name . " (QTY: " . $item['quantity'] . " x = " . str_ireplace(" ", "", money_format('%(#10n', $newprice)) . ")</li>"; } else { } endforeach; echo "</ul>"; echo "<h3>Sheer Descents</h3>"; echo "<ul>"; foreach ($items as $item): $this->db->where('id', $item['id']); $query = $this->db->get('items')->row(); if ($item['quantity'] > 1 && $item['quantity'] == TRUE && $query->category == "Sheer Descents") { $newprice = $item['quantity'] * $query->price; $totals[] = $newprice; } else { $newprice = $query->price; $totals[] = $newprice; } if ($query->category == "Sheer Descents") { echo "<li>" . $query->name . " (QTY: " . $item['quantity'] . " x = " . str_ireplace(" ", "", money_format('%(#10n', $newprice)) . ")</li>"; } else { } endforeach; echo "</ul>"; echo "<h3>Booster Pump</h3>"; echo "<ul>"; foreach ($items as $item): $this->db->where('id', $item['id']); $query = $this->db->get('items')->row(); if ($item['quantity'] > 1 && $item['quantity'] == TRUE && $query->category == "Booster Pump") { $newprice = $item['quantity'] * $query->price; $totals[] = $newprice; } else { $newprice = $query->price; $totals[] = $newprice; } if ($query->category == "Booster Pump") { echo "<li>" . $query->name . " (QTY: " . $item['quantity'] . " x = " . str_ireplace(" ", "", money_format('%(#10n', $newprice)) . ")</li>"; } else { } endforeach; echo "</ul>"; echo "<h3>Pool Concrete Decking</h3>"; echo "<ul>"; foreach ($items as $item): $this->db->where('id', $item['id']); $query = $this->db->get('items')->row(); if ($item['quantity'] > 1 && $item['quantity'] == TRUE && $query->category == "Pool Concrete Decking") { $newprice = $item['quantity'] * $query->price; $totals[] = $newprice; } else { $newprice = $query->price; $totals[] = $newprice; } if ($query->category == "Pool Concrete Decking") { echo "<li>" . $query->name . " (QTY: " . $item['quantity'] . " x = " . str_ireplace(" ", "", money_format('%(#10n', $newprice)) . ")</li>"; } else { } endforeach; echo "</ul>"; echo "<h3>Solar Heating</h3>"; echo "<ul>"; foreach ($items as $item): $this->db->where('id', $item['id']); $query = $this->db->get('items')->row(); if ($item['quantity'] > 1 && $item['quantity'] == TRUE && $query->category == "Solar Heating") { $newprice = $item['quantity'] * $query->price; $totals[] = $newprice; } else { $newprice = $query->price; $totals[] = $newprice; } if ($query->category == "Solar Heating") { echo "<li>" . $query->name . " (QTY: " . $item['quantity'] . " x = " . str_ireplace(" ", "", money_format('%(#10n', $newprice)) . ")</li>"; } else { } endforeach; echo "</ul>"; echo "<h3>Raised Bond Beam</h3>"; echo "<ul>"; foreach ($items as $item): $this->db->where('id', $item['id']); $query = $this->db->get('items')->row(); if ($item['quantity'] > 1 && $item['quantity'] == TRUE && $query->category == "Raised Bond Beam") { $newprice = $item['quantity'] * $query->price; $totals[] = $newprice; } else { $newprice = $query->price; $totals[] = $newprice; } if ($query->category == "Raised Bond Beam") { echo "<li>" . $query->name . " (QTY: " . $item['quantity'] . " x = " . str_ireplace(" ", "", money_format('%(#10n', $newprice)) . ")</li>"; } else { echo "<li>None</li>"; } endforeach; echo "</ul>"; It goes on beyond this to several more categories, but I don't know how to handle looping through this best. Thanks!

    Read the article

  • Outlook 2010: People pane not working well

    - by Eduardo Molteni
    I really like the new People pane in Outlook 2010. Not for the "Social" features, but for finding related emails and attachments. But.. I does not work. It is totally broken. On some people does not show any mail, and only some mails in others. I've tried re-indexing and recreating the profile, not to avail. Do you know some trick to make it work? Using 32bits outlook, without Exchange, only local.

    Read the article

  • filezilla Command: MLSD Response: 500 Error: Failed to retrieve directory listing

    - by solomongaby
    Hello, Recently our network was moved to the corporate network and behind the company firewall. Since the i could not access the FTP Servers using Filezilla. I can connect to them but cannot receive the directory listing. Command: MLSD Response: 500 Error: Failed to retrieve directory listing I can access the server using other softwares ( GnomeCommander ) but i would like to use Filezilla for its advanced features. I tried active and pasive mode but that doesnt work. I trace the problem to the MSLD command. I think if i could make filezilla use LIST command it will work. Any ideeas. Thanks.

    Read the article

  • exchange server 2010 Outlook Web Access - Exchange Control Panel WEB Interface

    - by Aceth
    from what i can gather the mailbox bit of the web interface works fine.. when any of the users go to options (top right) and try to use some of the features such as the Organise Mail Delivery Reports to find messages etc... it comes up with a message .. "An item with the same key has already been added" I've looked in the event viewer and i think its this error - Watson report about to be sent for process id: 7016, with parameters: E12IIS, c-RTL-AMD64, 14.00.0639.021, ECP, ECP.Powershell, https://x.x.x.x/ecp/PersonalSettings/Accounts.svc/GetList, UnexpectedCondition:ArgumentException, c09, 14.00.0639.021. ErrorReportingEnabled: False and Request for URL 'https://x.x.x.x/ecp/PersonalSettings/Accounts.svc/GetList' failed with the following error: System.ArgumentException: An item with the same key has already been added. at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.ExecuteSynchronous(HttpApplication context, Boolean flowContext) at Microsoft.Exchange.Management.ControlPanel.WebServiceHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) I've tried googling but no luck that's relevant :(

    Read the article

  • PhotoShop CC install: error: could not update photoshop

    - by John Sonderson
    I have renamed the folder to which my previous version of PhotoShop CC was installed and then installed the latest version of PhotoShop CC using the Creative Cloud application. However once Creative Cloud finished downloading and installing PhotoShop CC I got the following error (sorry about having a localized version of windows, so I cannot properly translate the error text, but the error code I get is error code U46M1P6): Anyone got this error and is this OK, or is something wrong and do I need to fix it? I am curious about exactly which features I will be missing due to this error message. I tried restarting the download and install process, but I get error message U44M1P7. Can someone please explain to me why it is not working? Thanks.

    Read the article

  • Networking with Windows 7

    - by Alix Axel
    I got several computers connected to my home wireless network and I want to make use of some of the features of Windows 7 for home networks but I can't seem to get them working: How do I keep files and folders in sync between specific computers? I'm not talking about Live Sync. How can I stream to Windows Media Player from another computer? I would appreciate if someone could provide me some links / solutions that address my needs. Thanks! To anyone who thinks this question is a duplicate and wants to close it please bare in mind the following: I'm not looking for additional software, I know I can use Live Sync, Dropbox and so on but I'm asking this: how do I configure Windows 7 to sync files between my home network - no Internet required! This has something to do with shared folders and offline files in Windows 7, but I can't get it to work. PS: Please merge with this question: http://superuser.com/questions/139763/networking-with-windows-7

    Read the article

  • Very large database, very small portion most being retrieved in real time

    - by mingyeow
    Hi folks, I have an interesting database problem. I have a DB that is 150GB in size. My memory buffer is 8GB. Most of my data is rarely being retrieved, or mainly being retrieved by backend processes. I would very much prefer to keep them around because some features require them. Some of it (namely some tables, and some identifiable parts of certain tables) are used very often in a user facing manner How can I make sure that the latter is always being kept in memory? (there is more than enough space for these) More info: We are on Ruby on rails. The database is MYSQL, our tables are stored using INNODB. We are sharding the data across 2 partitions. Because we are sharding it, we store most of our data using JSON blobs, while indexing only the primary keys

    Read the article

  • Windows 7 Drivers for Hp Tx2000 tablet Pc

    - by iceman
    Has anyone tried the new tablet features of windows 7 on the Hp tablet TX2001au : http://h10025.www1.hp.com/ewfrf/wc/product?product=3653674&lc=en&dlc=&cc=us&lang=&softwareitem=ob-77258-1&dest_page=product&os=4062 ? Hp has only Vista drivers and no Windows 7 drivers yet : link and link The main issues after installing Windows 7 is that the graphics card (Nvidia GeForce Go 6150) and the coprocessor are not detected.The latest 191.07 GeForce/ION Driver installer says that it cannot find any compatible hardware by the way, i still haven't been able to get Xp running on this . The Nvidia GeForce Go 6150 driver seems to be customized by HP !! If you install the laptopvideo2go.com/ drivers on Xp(after MS nags that it can't verify the publisher of the driver) , it shows the blue screen of death. Is there a way to debug the BSOD ?

    Read the article

< Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >