Search Results

Search found 16940 results on 678 pages for 'disk drive'.

Page 298/678 | < Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >

  • Ideal backup appliance for backup software like Bacula?

    - by Ricket
    I'm at a small company and we (the IT department of two) manage <100 client computers and a handful of servers. Currently we're using a company's appliance to handle backup; it does a small backup every night and a full backup every weekend, and a guy comes on Wednesday to take an offsite backup drive (and gives back last week's drive to swap with it). The backup is done only on the servers' hard drives, because our client computers and employees make sure not to store anything worthwhile on their own computers. So it's a pretty simple situation. Lately this system, mainly the appliance, has been having problems, so we are looking for an alternative. I'm researching other companies but also looking into what we might expect from trying to do this ourselves. There will undoubtedly be a large learning curve, but hey, that's what serverfault is for, right? :) So anyway I was looking at Bacula. Feature list sounds great, documentation is plentiful, but it's only software. So my question is, what is the ideal backup server to run the Bacula server software on? And not only the server but other related appliances. Our current backup appliance uses only hard drives, not tape drives. It has several plugged into it at one time, in hotswap bays on the front of the machine. I couldn't help but notice though, it's hardly more than Windows XP with hard drive bays, a PCI eSATA card (which connects to another appliance extension piece with 2 more bays), and their software. Since the company will take back their appliance if/when we cancel with them, where can I go to configure a server with these kinds of things? And should I consider switching to tape drives? What other concerns should I be thinking about when I pick out hardware for a backup server? Maybe I'm being naive, I'm sure Dell (and any other computer company) sells them in the small business section of their website, but I wanted to make sure that there's not some other more recommended place that other companies are getting their hardware from, and that I don't need anything special for Bacula.

    Read the article

  • How to use BCDEdit to dual boot Windows installations?

    - by Ian Boyd
    What are the bcdedit commands necessary to setup dual boot between different installations of Windows?5 Background i recently installed Windows 8 onto a separate hard drive1. Now that Windows 8 in installed i want to dual-boot back to Windows 7. i have my two2 hard drives: So you can see that i have my two disks, with the partitions containing Windows: Windows 7: \\PhysicalDisk0 (partition 03) Windows 8: \\PhysicalDisk2 (partition 1) What i'm trying to figure out how is how to use bcdedit to instruct the thing that boots Windows that there is another Windows installation out there. Running bcdedit now, it shows current configuration: C:\WINDOWS\system32>bcdedit Windows Boot Manager -------------------- identifier {bootmgr} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {globalsettings} integrityservices Enable default {current} resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Windows Boot Loader ------------------- identifier {current} device partition=C: path \WINDOWS\system32\winload.exe description Windows 8 locale en-US inherit {bootloadersettings} recoverysequence {ce153eb9-3786-11e2-87c0-e740e123299f} integrityservices Enable recoveryenabled Yes allowedinmemorysettings 0x15000075 osdevice partition=C: systemroot \WINDOWS resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} nx OptIn bootmenupolicy Standard hypervisorlaunchtype Auto i cannot find any documentation on the difference between Windows Boot Manager and Windows Boot Loader. Documentation There is some documentation on Bcdedit: Technet: Command Line Reference - Bcdedit Technet: Windows Automated Installation Kit - BCDEdit Command Line Options Whitepaper - BCDEdit Commands for Boot Environment (Word Document) But they don't explain how edit the binary boot configuration data If i had to guess, i would think that a Windows Boot Manager instructs the BIOS what program it should run. That program would give the user a set of boot choices. That leaves Windows Boot Loader do be a particular boot choice, that represents a particular installation of Windows. If that is the case i would need to create a new Windows Boot Loader entry. This means i might want to use the /create parameter: /create Creates a new boot entry: bcdedit [/store filename] /create [id] /d description [/application apptype | /inherit [apptype] | /inherit DEVICE | /device] So i assume a syntax of: >bcdedit /create /d "The old Windows 7" /application osloader Where application can be one of the following types: Apptype Description BOOTSECTOR The boot sector application OSLOADER The Windows boot loader RESUME A resume application Unfortunately, the only documentation about osloader is "The Windows boot loader". i don't see how that can differentiate between Windows 8 on one hard drive, and Windows 7 on another. The other possible parameter when /create a boot loader is >bcdedit /create /D "Windows Vista" /device "The Quick Brown Fox" Unfortunately the documentation is missing for /device: /device Optional. If id is not set to a well-known identifier, the option that is used to specify the new boot entry as an additional device options entry. Since i did not set id to a well-known identifier, i must set /device to "the option that is used to specify the new boot entry as an additional device options entry". i know all those words; they're all English. But i have on idea what it is saying; those words in that order seem nonsensical. So i'm somewhat stymied. i don't want to be like Dan Stolts from Microsoft: I found no content that was particularly helpful when I hosed my machine by playing with BCDEdit. This post would have been ok if there was much more detail especially on the /set command OSDevice, etc. So once I got my machine fixed, I documented the solution and the information is here.... i mean, if a Microsoft guy can't even figure out how to use BCDEdit to edit his BCD, then what chance to i have? Bonus Reading BCDEdit Command-Line Options Bcdedit Server 2008 R2 or Windows 7 System Will NOT Boot After Making Changes To Boot Manager Using BCDEdit Visual BCD Editor4 Windows 7 and Windows 8 RTM Dual Boot Setup Footnotes 1 Since the Windows 8 installer would have damaged my Windows 7 install, i decided to unplug my "main" hard drive during the install. Which is a long-winded explanation of why the Windows 8 installer didn't detect the existing Windows 7 install. Normally the installer would have automatically created the required entries for dual-boot. Not that the reason i'm asking the question is important. 2 Really there's three drives, but the third is just bulk storage. The existence of a 3rd hard drive is irrelevant to the question. i only mention it in case someone wants to know why the screenshot has 3 hard drives when i only mention two. 3 i arbitrarily started numbering partitions at "zero"; not to imply that partitions are numbered starting at zero. i only mention partitions because i don't see how any boot-loader could do its job without knowing which partition, and which folder, an installation of Windows is located in. 4 i'm asking about BCDEdit. i tried Visual BCD Editor. It seems to be a visual BCD editor. That is to say that it's a GUI, but still uses the same terminology as BCDEdit, and requires the same knowledge that BCD doesn't document. 5 For simplicity sake we'll assume that all installation of Windows i want to dual-boot between are Windows Vista or later, making them all compatible with the BCDEdit and the binary boot loader. The alternative would require delving into the intricacies of the old ntloader. Nor am i asking about dual booting to Linux; or how to boot to a Virtual Hard Drive (vhd) image. Just modern versions of Windows on existing hard drives in the same machine. Note: You can ignore everything after the word Background. It's all pointless exposition to satisfy some people's need for "research effort" before they'll consider being helpful. Some people have even been known to summarily close questions unless there is research effort. Some people have been know to close questions if there is too much research effort. Some people close questions when i put the note saying that they can ignore everything after the Background out of spite. Some people are just grumpy.

    Read the article

  • Migration of VM from Hyper-V to Hyper-V R2 - Pass through disks

    - by Andrew Gillen
    I am trying to migrate a VM which is using two pass through disks from a legacy Hyper-V Cluster to a new R2 cluster. The migrated VM cannot use the pass through disks though. The guest OS (2008 R2) doesn't seem to like the disk and eventually tries to format the disk instead of mounting it. The migration process I have been using for all my VMs is to export the VM to a new lun, then add that new lun to the new cluster, importing the vm off it in the hyper-v console, then making it highly available. I assumed I could do the same thing and just add the two pass through disks to the new cluster and then attach them inside Hyper-V. Is there a process I need to follow to migrate pass through disks that does not involve setting up new Luns and robocopying the data over?

    Read the article

  • How to add a local file to trusted zone in IE8?

    - by Raghu Dodda
    I want to add a file on my local drive (C:\something.html) to the Trusted Zone in IE8 (my OS is Windows Server 2003). The Add Sites Dialog box, does not seem to take entries for files on the local drive. I have tried: file://C:\something.html file:\\localhost\c$\something.html I have seen other solutions (on superuser and elsewhere) such Mark of Web, that allow your local file to be treated as if it were part of the internet zone, but I want to add my file to the Trusted Zone. How can I do this? Thanks.

    Read the article

  • HP PDX Laptop and blu-ray region, HP MediaSmart problem

    - by Lasse V. Karlsen
    I have a laptop here, a HP HDX 16 EO1000 with a Blu-Ray drive. Installed on the machine is a software package called HP MediaSmart, which presumably can play Blu-Ray movies. However, when inserting a BD disk and starting HP MediaSmart, it comes up with a warning screen and the following message: This disc has been coded for Region B only and will not play in this machine. Please eject this disc and play on a Region B player. The question is, can we change this region? The machine is in europe, which is the B-region, but apparently the drive, or software, or both, is set to some other region. I don't even know where to find the current setting so if anyone knows, please post an answer with some information of where to look.

    Read the article

  • Uninstalling Vista from dual boot of Win7/Vista

    - by Alex
    Topic title says it all. Right now I have 2 things I need to do... 1) Remove the windows.old folder. My problem with this is that when I go to disk cleanup, the "Remove Previous Window Installations" option isn't there. Not sure what to do here. EDIT: Solved this part. Didn't hit button clean up system files, was just looking at normal disk cleanup window. 2) The rest.. I've read that I should use EasyBCD, but I'm not sure what to do with it once I get it. Any help is appreciated. Thanks. EDIT: I downloaded EasyBCD, and I see the option to add/delete entries. Do I just need to delete the Vista entry, or is there more to it than that?

    Read the article

  • Windows 7 installation too slow

    - by BizApps
    I have P.C with Emaxx Motherboard : emx-a55gm-icafe with AMD dual core processor,500 GB WD Sata HDD,2GB of RAM,samsung dvdr,windows 7 dvd which is all brandnew. When i was trying to install windows 7 ulitmate on my P.C it really takes hours on setting up, which is really rare and i'm still hopeless getting a solution for this.But I don't have any issue installing windows 7 on my HP laptop that can be finished within just more than 20minutes. There is same issue that ive search in google and disabling the floppy disk drive in BIOS is their solution, but my problem is, Emaxx icafe doesnt have floppy disk drive setting on bios. I already change ACHI/IDE Support but i have still no luck. Is there any solution for this? Thanks in Regards

    Read the article

  • vgcreate --> "Command failed with status code 5." what does this mean?

    - by erik
    i'm playing around w/ LVM on a centos domU in a xen-based vps. I'm in rescue mode and I've created one physical volume (pvcreate /dev/xvda1) for my entire drive, which is formatted as LVM. i'm now trying to create a volume group using vgcreate main /dev/xvda1, but it's returning "Command failed with status code 5.". I've been unable to find an explanation for this error code. does anyone know what it means? for what it's worth, my goal is to create multiple logical volumes on my drive using lvm. thanks

    Read the article

  • Register a dll in Windows Server 2003

    - by Karee
    I'm trying to register some DLLs for a particular application but having some problems. The DLLs are stored in the application folder in the D: drive. I run cmd.exe, go to the D: drive and run regsvr32, but it gives me the error: "The was loaded, but the DllRegisterServer entry point was not found. This file cannot be registered." After searching for other solutions, I also tried copying the DLLs into the C:\WINDOWS\system32 folder and running regsvr32 directly there but that didn't work either. It gave me the same error. I'm not very familiar with Windows Administration, so I may need detailed instructions/explanations. Any help would be greatly appreciated! Thank you very much!

    Read the article

  • Troubleshooting PC

    - by srand
    After playing PC games after a few hours I decided to take a break. When I opened up My Computer in Windows 7 I noticed I one of my drives had disappeared. Thinking it was just a glitch, I tried to restart. Upon restart, the BIOS took forever to get through (I didn't notice my disappeared hard drive in the listed drives) and the computer seemed stuck at the "Starting Windows" screen. I hard shut down everything. Opened up the case, used canned air to clear the dust out and made sure all devices were snugly in place. I hooked everything up and powered on. This time, after a few seconds the computer restarted (nothing showed up on screen either). After its restart, the computer didn't do anything. The hard drive indicator light was on the whole time. What happened? :( PC Specs: Windows 7, 3GB RAM, Core 2 Duo, 3 Hard drives

    Read the article

  • Troubleshooting PC

    - by srand
    After playing PC games after a few hours I decided to take a break. When I opened up My Computer in Windows 7 I noticed I one of my drives had disappeared. Thinking it was just a glitch, I tried to restart. Upon restart, the BIOS took forever to get through (I didn't notice my disappeared hard drive in the listed drives) and the computer seemed stuck at the "Start Windows" screen. I hard shut down everything. Opened up the case, used canned air to clear the dust out and made sure all devices were snugly in place. I hooked everything up and powered on. This time, after a few seconds the computer restarted (nothing showed up on screen either). After its restart, the computer didn't do anything. The hard drive indicator light was on the whole time. What happened? :( PC Specs: Windows 7, 3GB RAM, Core 2 Duo, 3 Hard drives

    Read the article

  • How to check CPU temperature on a HP P2000?

    - by Pavel
    I have a HP StorageWorks MSA Storage P2000 G3 SAS. show sensor-status gives something like # show sensor-status Sensor Name Value Status ---------------------------------------------------- On-Board Temperature 1-Ctlr A 53 C OK On-Board Temperature 1-Ctlr B 52 C OK On-Board Temperature 2-Ctlr A 61 C OK On-Board Temperature 2-Ctlr B 63 C OK On-Board Temperature 3-Ctlr A 53 C OK On-Board Temperature 3-Ctlr B 53 C OK Disk Controller Temp-Ctlr A 34 C OK Disk Controller Temp-Ctlr B 32 C OK Memory Controller Temp-Ctlr A 66 C OK Memory Controller Temp-Ctlr B 67 C OK [...] Overall Unit Status OK OK Temperature Loc: upper-IOM A 40 C OK Temperature Loc: lower-IOM B 38 C OK Temperature Loc: left-PSU 36 C OK Temperature Loc: right-PSU 40 C OK [...] is one of the values the CPU/FPGA temperature? Or, if not, how do I get it? Thanks!

    Read the article

  • Install Additional Printer Drivers (x86) on Vista (x64) - Can't find suitable (x86) ntprint.inf

    - by jmohr
    I have a printer connected to my computer that I'd like to share on my home network - shouldn't be a problem. The computer the printer is connected to is running Vista Ultimate x64. The computers I'm trying to share with are x86 Windows XP Professional and x86 Vista, so I need to install additional (x86) drivers. I checked the box to add x86 printer drivers and then it asked for the location of the drivers. I browsed to the location and clicked OK. It then prompted "Please provide path to Windows media (x86 processor). When I click "Browse..." it wants the location of a file named ntprint.inf It looks like it's asking for a Windows (x86) installation disk. I put one in but I can't seem to find this file on the 32-bit Vista install disk Where is the proper place to find this file?

    Read the article

  • inaccessible_boot_device after p2v Windows 2000 Pro SP4 to Workstation 6.5

    - by 20th Century Boy
    I am using the latest VMware Converter Standalone to p2v a physical Windows 2000 Professional SP4 PC. The PC is a standard Pentium with IDE disk from circa 2001. The disk is 20GB partitioned logically into C: and D. It converts with no errors (I did both disks into one VMDK). When I power on the VM in VMware Workstation 6.5 (or Vmware Player 2.5) it gets to the Win 2000 boot graphic then I get a BSOD with the classic 0x7B Stop error: inaccessible_boot_device. Is there anything I can do to get the vm to boot? I am lost for ideas, normally p2v of a basic IDE pc works flawlessly. I'm willing to put a bounty on this as I am trying to sort this out for a client urgently.

    Read the article

  • How can I install the latest full version of Canon ZoomBrowser EX without the original CD?

    - by Sorin Sbarnea
    ZoomBrowser EX comes with Canon cameras. Canon software enigeering team did a really poor job analyzing how people are using the software: people do lose their x-year old CD or do not have it with them when travelling do not have a CD drive at all (very common nowdays) Canon updater from their website does not allow you to install the software if it does not find the original CD in the drive. The question is how do I trick the installer to run on a computer and install the product that I payed for. Currently the latest version is 6.5.1.15 and you can download the updater from Canon website. In fact the updater is just the full installer but it doesn't allow you to install if it doesn't find a previous install or the original CD. Note: In the past I used to save a registry file with registry keys used by it, loading it did allowed me to run the installer but now, with Windows 7 x64 it seams that it doesn't work anymore.

    Read the article

  • Configuring RAID1 on HP Proliant Microserver N54L / Ubuntu 14.04.1 LTS [duplicate]

    - by Chris Beach
    This question already has an answer here: Cant find my harddrives in ubuntu installation? 2 answers I've bought a N54L and fitted two 3GB drives. Keen to get set up with RAID1. BIOS: SATA controller mode set to "RAID" RAID Option ROM utility: both physical drives set up as one logical drive When I came to install Ubuntu (14.04.1), both drives appeared during the setup process. I was only expecting to see the logical drive, although I'm a complete novice with RAID. I've read that the HP Proliant Microservers don't have "proper" RAID support, and require some kind of driver to be installed. I've tried a few HP utilities from the following apt repo: deb http://downloads.linux.hp.com/SDR/repo/mcp wheezy/current non-free On installation, most say "server not supported" Would appreciate your advice.

    Read the article

  • HP Recovery options: System Recovery not showing

    - by sha404
    I am using HP Pavilion dv4 notebook. Previously, there were following options in Recovery Manager(using f11 during boot): +System Recovery +Factory Restore +Minimized Image Recovery The System Recovery option allows me to restore only Operating system drive e.g. C:\ drive, keeping all other user (me) created hard drives intact. I made a set of recovery disk. Since then I don't see the System Recovery option in HP Recovery Manager. But all other options are still there. But when I use recovery disks that i created earlier, that option e.g. System Recovery is shown. But It's really boring and time consuming to use disks for recovery. So, what's the problem with internal HP Recovery Manager? Why isn't it showing that option?

    Read the article

  • HP D2D 4312 Bacula configuration

    - by krisdigitx
    I have configured 5 libraries on the HP D2D system Discovery on the Bacula server shows only the last library and not all libraries. Why? [root@server bacula]# iscsiadm --mode discovery --type sendtargets --portal 10.66.59.114 10.66.59.114:3260,1 iqn.1986-03.com.hp:storage.d2dbs.czj2020vvy.50014380075dca5e.library12.drive1 10.66.59.114:3260,1 iqn.1986-03.com.hp:storage.d2dbs.czj2020vvy.50014380075dcaf2.library12.robotics I can query it fine using... [root@server bacula]# mtx -f /dev/sg2 inquiry Product Type: Tape Drive Vendor ID: 'HP ' Product ID: 'Ultrium 5-SCSI ' Revision: 'ED51' Attached Changer API: No [root@bray bacula]# mtx -f /dev/sg3 inquiry Product Type: Medium Changer Vendor ID: 'HP ' Product ID: 'MSL G3 Series ' Revision: 'EL41' Attached Changer API: No [root@server bacula]# mtx -f /dev/sg3 status Storage Changer /dev/sg3:1 Drives, 97 Slots ( 1 Import/Export ) Data Transfer Element 0:Empty Storage Element 1:Full :VolumeTag=50507F82 Storage Element 2:Full :VolumeTag=50507F83 Storage Element 3:Full :VolumeTag=50507F84 Storage Element 4:Full :VolumeTag=50507F85 Storage Element 5:Full :VolumeTag=50507F86 Storage Element 6:Full :VolumeTag=50507F87 Storage Element 7:Full :VolumeTag=50507F88 Does anyone have any good documentation for implementing Bacula with an HP D2D tape drive for server backups, and how to allocate libraries?

    Read the article

  • Windows 2k3 server as a KVM client

    - by Peter NUnn
    Just wondering if anyone else has had issues installing Windows 2K3 server under KVM. I have tried a few times tonight and keep getting "not a supported platform" when the installation first boots. I've used i686, had acpi and apic off and on, given it 4GB ram, 200GB hard disk and it fails every time. I've done some hunting around, but can't find anything conclusive on google. It is listed as a supported client on the KVM site. Host is Ubuntu 10.04 64Bit, qemu-kmv hypervisor. Drivers, I'm not sure what your asking for there, but the disk is a standard (I believe) 32 bit Win2K3 server. I'm trying to install a bulk standard server install. I've done it with win2K8 no problems, but this 2k3 install is failing every time.

    Read the article

  • Hyper-V Boot failure on VHD made with Acronis?

    - by gary
    hoping someone can advise on my problem, I am running Hyper-V core and trying to create my first VM for testing purposes. Using Acronis True Image echo server with UR I converted a Seerver 2000 tib to VHD. I then copied this across to the Hyper-V local drive and created a new VM pointing the hard drive to the vhd image. When I boot this up all I get is "Boot failure. Reboot and Select proper Boot device or Insert Boot media in selected Boot device". The original server had SCSI disks, the Hyper-V server doesn't, but I have ensured that it boots from an IDE disk and that it is in fact booting from that not the CD. I can only imagine this is caused by the SCSI disks on VHD but cannot for the life of me work out how to fix, I have several of these I need to do so starting to worry now! I can confirm that when I did this from tib to vmdk it worked first time using VMware on a laptop. Any help very much appreciated. Gary

    Read the article

  • Supplementary Developer Laptop

    - by David Smith
    I'm looking to buy a laptop with the following specs for a developer. The goal will be to have a development machine supplementing the devs desktop. During work hours the dev will be on a beefy desktop. For working while on the go: trains, client sites, code camps, it would be nice to have a machine which can run Visual Studio 2008 without needing to remote desktop into their primary machine. What do you think is the lowest cost laptop meeting this need? Here are the specs I have in mind: SSD drive 64GB-doesn't need to be huge, most data is stored on servers. Will need to fit Windows 7, IIS, SQL Server, and Visual Studio 2010. RAM-3GB processor =Pentium Core 2 duo Screen size = 14 inches. OS doesn't matter. It will be paved with Windows 7 Ultimate optical drive omitted would be a plus. weight and battery life aren't so important because the machine will be plugged in almost all the time.

    Read the article

  • Cannot connect to Xen domU via VNC if X isn't installed on domU

    - by Hai Minh Nguyen
    I'm trying to build a Xen domU that can be connected through the Xen's VNC server. Below is the template (actually it's generated by OpenNebula): name = 'one-153' #O CPU_CREDITS = 256 memory = '128' bootloader = "/usr/bin/pygrub" disk = ['tap:aio:/home/oneadmin/cloud/one/var/153/images/disk.0,xvda,w',] vif = ['mac=02:00:c0:a8:00:03,bridge=virbr0',] vfb = ['type=vnc,vnclisten=slave1,vncdisplay=1,vncpasswd=v98KXdFN'] The problem is that I can't connect to the domU if it doesn't have X. In this case all I got is a blank screen. Besides, if the domU has X, the screen is still blank until the login prompt appears, while it should be like this. Some information that may be useful: The domU and the dom0 both run CentOS 5.5. If the domU has X, it can be connected even when both X and the domU's VNC server isn't running. The VNC client is RealVNC.

    Read the article

  • how to multi-boot/upgrade linux from LVM-based partition

    - by kenny-bobby
    i currently have FC3 linux which installed itself on the hard disk using LVM partitioning, so it is basically all one big partition. i would like to try some other distributions and upgrade to something newer, but don't want to lose my current capabilities and data files, and i know nothing or less about LVM. Is it possible (and if so an example would be nice) to install a non-LVM-based distribution on the LVM disk and have multi-boot options? Or do i have to start over new and drop the LVM? My guess is that i should save my /home (data files and .rc files) on a backup device first, then somewhere/somehow create a new partion for installing another distribution. Any LVM experts out there that have tried anything like this--well i sure could use some pointers and advice...

    Read the article

  • amanda backup problem

    - by hossam alkhalili
    hello, i installed amanda on centos 5.5 to backup windows 7 and windows server 2008 over network and i used 15 minutes instillation guide but when i type amcheck DailySet1 i got request failed then if i type amservice when i amandabackup account to define the problem i got Permission denied and on root account i got OPTIONS features=ff7fffff9cfeffffd3cf1300; i use zwc on windows 7 as an agent can anyone help me thanks -sh-3.2$ amcheck DailySet1 Amanda Tape Server Host Check Holding disk /dumps/amanda: 1791315968 KB disk space available, using 1791213568 KB slot 1: volume 'DailySet1-01' Will write to volume 'DailySet1-01' in slot 1. NOTE: skipping tape-writable test NOTE: conf info dir /etc/amanda/DailySet1/curinfo does not exist NOTE: it will be created on the next run. NOTE: index dir /etc/amanda/DailySet1/index does not exist NOTE: it will be created on the next run. Server check took 0.880 seconds Amanda Backup Client Hosts Check WARNING: jrcbs01.jrc.local: selfcheck request failed: Connection refused Client check: 1 host checked in 10.020 seconds. 1 problem found. amservice 192.168.1.1 bsdtcp noop [root@jrcbs01 ~]# amservice 192.168.1.5 bsdtcp noop

    Read the article

  • Restoring Time Machine from two Macs onto one (new) mac

    - by Dan
    My parents used to have two Macs...a "iLamp-style" iMac for my Dad, and an iBook G4 for my Mom. A while back, I had setup the iMac to have an external Firewire Hard Drive for a Time Machine Volume, and backed up both the iMac and iBook to that drive. Recently, the iBook died and the iMac was really slow to work with. So my parents decided to replace the iBook with an iPad, and also purchased a Mac Mini. I need to help my parents get their data from their two computers (backed up by Time Machine) onto the same machine. Pretty much everything is identical between the two systems (same apps, etc), however, they both have individual email accounts and photos that they want to retain. Is it possible to do two Time Machine restores onto one computer?

    Read the article

< Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >