Search Results

Search found 26524 results on 1061 pages for 'laptop display'.

Page 298/1061 | < Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >

• Boot from external usb hdd won't work in 12.04

  - by Ben Andersen

  I've been running 10.04 on an external USB HDD without problems for years. I installed 12.04 on an external USB HDD and it worked until I upgraded to all the new packages. But after that it wouldn't boot. I just got into the grub prompt. So then I tried installing on the disk inside the computer and that worked fine. But when I take it out and use it as an external USB HDD I just get: error: hd0 out of disk. grub rescue> How can I fix this? So why do I want this you might wonder? Well I have a laptop at home and a somewhat similar at work. And I just move the disk between them and don't have to move a heavy laptop. So I really hope I can continue doing this with 12.04! The old disk is only 80Gb but the new one is 320Gb (7200rpm Toshiba). I'm using 12.04 on a 64Gb SSD as an external drive and it warns about out of disk but it boots anyway most of the times.

  Read the article

• Battery is drained too quickly

  - by LucaB

  I'm getting really low battery life under ubuntu, not even close to windows. I tried powertop, and I saw that my laptop is consuming in idle nearly 20 watts (a bit more). I tried to install laptop-mode-tools, change "good" into "bad" in powertop, but nothing changes. I see that I have the the HD audio output device which is running at 100% every time. Could this be the problem? This is a report from powertop. The battery reports a discharge rate of 22.8 W The estimated remaining time is 33 minutes Summary: 381.8 wakeups/second, 0.0 GPU ops/second and 0.0 VFS ops/sec Usage Events/s Category Description 3.2 ms/s 182.7 Timer tick_sched_timer 100.0% Device Audio codec hwC0D3: Intel 7.9 ms/s 25.1 Process /usr/bin/X :0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch -background no 1.9 ms/s 24.2 Interrupt [6] tasklet(softirq) 2.9 ms/s 23.2 Process /usr/lib/chromium-browser/chromium-browser --type=zygote 8.1 ms/s 20.3 Process /usr/lib/unity/unity-panel-service 0.7 ms/s 17.4 Timer hrtimer_wakeup 4.2 ms/s 12.6 Process unity-2d-panel 604.4 µs/s 9.7 Process syndaemon -i 2.0 -K -R -t 149.7 µs/s 9.7 kWork ieee80211_iface_work 0.8 ms/s 8.7 Process metacity 19.5 ms/s 1.0 Process powertop 3.0 ms/s 6.8 Process //bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session 699.0 µs/s 6.8 Process /usr/lib/thunderbird/thunderbird 4.3 ms/s 4.8 Process gnome-terminal 658.9 µs/s 2.9 Interrupt [1] timer(softirq) 75.1 µs/s 2.9 kWork iwl_bg_run_time_calib_work 163.8 µs/s 1.9 Process /usr/lib/accountsservice/accounts-daemon 70.6 µs/s 1.9 Process [ksoftirqd/2] 25.8 µs/s 1.9 Process [ksoftirqd/0] 1.0 ms/s 1.0 Process /usr/bin/python /usr/sbin/powernapd 408.2 µs/s 1.0 Process unity-2d-shell 189.8 µs/s 1.0 Process /usr/lib/chromium-browser/chromium-browser 124.4 µs/s 1.0 Process /usr/lib/unity-lens-applications/unity-applications-daemon 113.3 µs/s 1.0 Process /usr/lib/gnome-settings-daemon/gnome-settings-daemon 112.0 µs/s 1.0 Process nautilus -n 104.9 µs/s 1.0 Process /usr/lib/gvfs/gvfsd-trash --spawner :1.2 /org/gtk/gvfs/exec_spaw/0 77.5 µs/s 1.0 Process /usr/lib/x86_64-linux-gnu/colord/colord 75.6 µs/s 1.0 Process /usr/lib/gvfs/gvfs-gdu-volume-monitor 75.0 µs/s 1.0 Interrupt [53] i915 74.9 µs/s 1.0 Process /usr/lib/gvfs/gvfs-afc-volume-monitor What should I do to make the battery consumption lower?

  Read the article

• What is the safest way to remove a swap partition?

  - by user212062

  I am running Ubuntu 12.04 on a 64-bit HP laptop with a 16 GB flash drive. I do not have a working hard drive right now. When I installed Ubuntu, I created a 2 GB swap partition on sdb1. I have since learned that swap partitions are generally a bad idea on flash drives, so I would like to use my swap space for my other partitions. You can see my partition scheme in the link below. I have read that I just have to comment sdb1 out of the fstab file, boot from a GParted live CD, select swapoff for sdb1, delete/merge with other partition, and everything's good. But, I've also read that messing with sdb1 can change the UUID of sdb2 or sdb3 and cause problems. Is this true? Does initramfs use swap at all? Also, when I get Ubuntu running on my laptop with an internal hard drive, does the swap partition help that much? I have 6 GB of DDR3. Does the rule of 1.5xActual RAM still apply? It seems like quite a bit to me. Thanks for the help! UPDATE: I have removed swap. The process I followed is: Right click swap partition in GParted and selected swapoff. Used # to comment the swap partition out of fstab. I tried to boot from a live GParted CD, but I kept getting an error, so I ran GParted in Ubuntu. Deleted swap partition in GParted. Unmounted /windows. Expanded /windows to take the remaining space. Mounted /windows. The / and /windows partitions each kept their own names and UUIDs, and everything is running fine. I have never seen any swap space being used before, and I don't intend to use the hibernate function, so I think removing swap was a good idea.

  Read the article

• Antenna Aligner Part 3: Kaspersky

  - by Chris George

  Quick one today. Since starting this project, I've been encountering times where Nomad fails to build my app. It would then take repeated attempts at building to then see a build go through successfully. Rob, who works on Nomad at Red Gate, investigated this and it showed that certain parts of the message required to trigger the 'cloud build' were not getting through to the Nomad app, causing the HTTP connection to stall until timeout. After much scratching heads, it turns out that the Kaspersky Internet Security system I have installed on my laptop at home, was being very aggressive and was causing the problem. Perhaps it's trying to protect me from myself? Anyway, we came up with an interim solution why the Nomad guys investigate with Kaspersky by setting Visual Studio to be a trusted application with the Kaspersky settings and setting it to not scan network traffic. Hey presto! This worked and I have not had a single build problem since (other than losing internet connection, or that embarrassing moment when you blame everyone else then realise you've accidentally switched off your wireless on the laptop).

  Read the article

• Multiple monitors showing same screen but different resolutions

  - by Luis Alvarado

  Is it possible to have 2 or more monitors showing the same screen, for example the same desktop but with different resolutions. Like the clone option in Nvidia or the mirror option using the Display settings in Ubuntu but instead of showing the same output with the same resolution, the both show the same output using a resolution that is native for each monitor connected. In my case if I have a netbook that has max resolution of 1360x768 and a TV that has 1280x1024, the would both show the same desktop but each with their own resolution that is compatible for each device. This would help in trying to find a resolution that works on both monitors and in cases like a mini netbook and a huge TV it would solve issues like having max 800x600 in one monitor and min 1024x768 in the other. In the case I tested I was using an HDMI cable but this question also involves VGA and any other connection. I have 3 tests scenarios for this: Scenario 1 - Laptop HP DV6000 (Intel Integrated Video) with 1360x760 connected to a Samsung LED 42 TV that has 1280x900. Scenario 2 - Laptop EEE with 1024x600 (Intel Integrated Video) connected to Sony LCD TV that supports 1280x900. Scenario 3 - Intel Desktop with Nvidia 440 GT with HDMI connected to Soneview 32' TV that supports 1920x1080 and VGA connected to an Epson Video Beam that supports 1280x1024 max. In this 3 scenarios I need to be able to show the same desktop and same views but on different resolutions for each output device. UPDATE: Tested with Xubuntu and the way it handles multiple monitors is precisely what I am asking. The ability to handle the resolution of different monitors showing the same thing.

  Read the article

• recent unreliable wireless connection on 10.04 and 10.10

  - by gabkdlly

  Recently, my internet connection over wireless has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista. The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. This problem does not seem to appear when I boot into Ubuntu 9.10 from a live CD ( more precisely, I was able to ping fu-berlin.de for an hour without any packet loss ). Under Ubuntu 10.10, I am experiencing about 33% packet loss. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow ( which happens often ) or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I have observed this problem with a Netgear KWGR614 Router ( with the manufacturers firmware ), as well as with a TP-LINK TL-WR741ND router running OpenWrt. Taking a look at my routers logs, I find many instances of the following line: Tuesday,04 Jan 2011 03:53:01 [TCP SYN Flood][Deny access policy matched, dropping packet] I know that the Netgear router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. I use WEP on the Netgear router and WPA on the TP-LINK to encrypt the wireless connections. Is it possible that someone is jamming my signal ?

  Read the article

• Internet is far slower in Ubuntu than Windows 7 on dual-booted machine

  - by Tim

  Edit: I'll leave the original post as-is, but after further investigation, it appears that the problem is something to do with my wi-fi card. Speeds are normal when I connect via cable. Edit 2: Problem was solved. It was something to do with the wireless card drivers. I normally use Windows 7 on my laptop and have internet speeds that are normally about 15-20 Mb/s. I have recently dual-booted with Ubuntu 12.10, and have noticed that internet speeds are drastically slower in Ubuntu. When tested, speeds range from 0.2-2 Mb/s, although occasionally being significantly faster than that or even stopping completely for short periods of time. I've also noticed that when first booting into Ubuntu, speeds start fairly fast, and drop to incredibly slow with a few seconds to a few minutes. There's still some possibility that the issue may be with my ISP, as things seem slower than usual even in Windows, but I suspect that it is related to Ubuntu, as things are far slower in Ubuntu than in Windows. I'm wondering, what could be the cause of this? Potentially relevant information: -I've dual booted before on this machine with earlier versions of Ubuntu (different ISP at the time) with no problem. ISP: Rogers (Major Canadian ISP) System info (Gateway NV53a Laptop): Operating System MS Windows 7 Home Premium 64-bit CPU AMD Phenom II N970 Caspian 45nm Technology RAM 6.00 GB Dual-Channel DDR3 @ 664MHz (9-9-9-24) Motherboard Gateway SJV51_DN (Socket S1G4) Graphics Generic PnP Monitor (1366x768@60Hz) ATI Mobility Radeon HD 4250 (Acer Incorporated [ALI]) Hard Drives 733GB TOSHIBA TOSHIBA MK7559GSXP ATA Device (SATA) Networking info: Connected through Wi-Fi Atheros AR5B97 Wireless Network A

  Read the article

• Why are my videos playing speeded up with no audio, but work fine if I log in as a guest?

  - by Martins Kruze

  Since the start of this week I have been experiencing a glitch in the multimedia on my Samsung R518 laptop. I have 2 problems: Videos in every player are speeded up around 2 or 4 times (including youtube.com (both HTML5 and flash variants), any other video on the web and videos on my laptop played by Totem Media Player), exception is VLC player, but 2nd problem does concern even that. There is no sound - simple as that (with or without headphones plugged in). These all problems are now, and has not seen before, I upgraded to Ubuntu 10.10 after it was possible, and from start I didn't have anything from this - it just started in this week. I haven't even putted new software in. I have more or less solved the question (kind of) - I just logged in as a guest - and it all works, but when I make a new user - it does not. Please help me. Some stats below: sudo lshw -c sound *-multimedia description: Audio device product: RV710/730 vendor: ATI Technologies Inc physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:48 memory:cfeec000-cfeeffff *-multimedia description: Audio device product: 82801I (ICH9 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:47 memory:fc200000-fc203fff sudo lshw -c video *-display description: VGA compatible controller product: M92 LP [Mobility Radeon HD 4300 Series] vendor: ATI Technologies Inc physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:46 memory:d0000000-dfffffff ioport:2000(size=256) memory:cfef0000-cfefffff memory:cfe00000-cfe1ffff

  Read the article

• Ubuntu 12.10: Installing proprietary Nvidia driver causes freeze at boot

  - by Greg

  Ok, so I just installed Ubuntu on my laptop, and I immediately encountered an issue: the HDMI audio output won't work. Yes, I know about the sound settings thing where you have to select the HDMI option, but even when it's selected I get no sound out of the TV I'm hooking it up to. This is a dealbreaker for me, because my laptop speakers are terrible, it's one of the big reasons I use my TV monitor. So I decided to work on solving the problem by upgrading my Nvidia drivers. I switched to one of the propriety drivers offered in that software updating utility that comes with the OS, the one option that said (tested). Viola, sound over the HDMI is now working. Unfortunately, this now brings me to my next problem: when I reboot Ubuntu with this or any other proprietary driver installed, it freezes when it tries to load my desktop. As in I can see my wallpaper, but no icons or options of any kind. The system is totally frozen, and gives me one of those "we've experienced an error, do you want to report it messages." So there's my bind. I need HDMI audio out, that's a total dealbreaker for me, but installing the drivers that give me that capability crash the system. Does anyone have any idea what's causing this

  Read the article

• CUDA & MSI GT60 with Optimus enabled GTX670M?

  - by user1076693

  I have a MSI GT60 Laptop with an Optimus enabled GTX 670M GPU, and I have been trying to get CUDA going in Ubuntu 12.04 environment. I realize that Optimus is not supported in Linux, but I have read the following post suggesting that CUDA works for hybrid GPUs. How can I get nVidia CUDA or OpenCL working on a laptop with nVidia discrete card/Intel Integrated Graphics? I installed the NVIDIA driver via sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current The resulting driver version is 302.17, and supposedly GTX 670M is supported since 295.59. I also downloaded CUDA 4.2 from the NVIDIA site, and compiled it against nvidia-current libraries. Unfortunately, when I run deviceQuery in the CUDA SDK, I get the following output cudaGetDeviceCount returned 38 -> no CUDA-capable device is detected Checking /proc/driver/nvidia/gpus/0/information gives the following Model: GeForce GTX 670M IRQ: 16 GPU UUID: GPU-????????-????-????-????-???????????? Video BIOS: ??.??.??.??.?? Bus Type: PCI-E DMA Size: 32 bits DMA Mask: 0xffffffffff Bus Location: 0000:01.00.0 Here is the output of "lspci | grep VGA" 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 1213 (rev ff) So... what am I doing wrong? Thanks!

  Read the article

• Choppy USB mice on just one of USB ports

  - by user20532

  I've got Lenovo b560 laptop with latest, properly updated Kubuntu on it (11.04 natty, kernel 2.6.38-8-generic). It has three USB2.0 ports onboard. I usually plug a mouse into one of them (I've got 3 different mice - in office, at home and for when on the go). Sometimes, usually after laptop awakening from sleep, the mouse still works but cursor movements are choppy, as if the processor was extremely loaded (it's usually not). I found that if I re-plug the mouse cord into the other USB port, it works just fine. If I plug it back to problematic port, it is still choppy and remains choppy until next boot. Of course I want my mice to always work fine. Problem is: I cannot reproduce this behavior for sure, it happens sporadically but regularly. I use different USB ports (problem has ever happened on each of them since), I use different mice (each has failed me this way at least once), I cannot generally find what exactly is going wrong and why plugging to different port fixes the mouse instantly. So I'd like to hear at least clues where to look at, what to try to identify my problem. A bit of update: while beginning this post, I had the issue once again. I have just replugged the mouse back to problematic port and it is not recognized at all. On the other port it works smoothly.

  Read the article

• Intel 5100 AGN disconnects and then disables my Verizon FiOS Actiontec router

  - by Anthony

  I am a new user (my first trial) of Ubuntu and booted up my Windows Vista laptop up with the Ubuntu CD. I was able to connect wirelessly to my router and stay connected for about a minute. After that it would disconnect and my router would be disabled: none of my other wireless devices would see the signal any longer, as if it disappeared. I would have to cycle the router's power toggle off/on to get it to come back on and put out a signal again. This happened repeatedly. I experienced no other problems trying the software (i.e., accessed my files w/o issue). I did not attempt to connect with an Ethernet cable. Here are the specs on my system: laptop is HP Pavilion dv5 Notebook PC system type is 64-bit operating system CPU is Intel Core 2 Duo P8600 2.4GHz ram is 4 GB network card is Intel WiFi Link 5100 AGN I read elsewhere in this forum that 64-bit systems may not be compatible with Ubuntu. Can anyone help me with this? I'd really like to be able to use this op system.

  Read the article

• Colored Vertical Lines upon boot and nomodeset DOES NOT fix it

  - by user2851032

  I have installed Lubuntu 13.04 on a Dell Inspiron 1501 laptop, rebooted the machine and encountered this problem. I edited the GRUB configuration to remove "quite splash" and enter "nomodeset", updated grub, and everything was fine. I could reboot the machine without any trouble. However, if I unplug the machine, wait a few seconds, and plug it back in, the problem with the colored lines comes back and nomodeset no longer helps to solve the problem. I tried using radeon.modeset=0 instead of nomodeset and that also works on multiple reboots until I unplug the machine and plug it back in. I was finally able to get around the problem by entering "radeon.exapixmaps=0" instead of radeon.modeset=0. I suppose I kind of made up that boot option using some information from an Arch Wiki page. This would work throughout reboots and even if I unplugged the laptop. It was working fine for quite a while. A few weeks later, I had some unrelated issues with the Java iced-tea plugin, and since 13.10 had just come out, I thought I would try upgrading. So upgrading didn't fix the problem with Java, and after unplugging the machine and trying to use it later, I was back to this problem with the black screen and colored vertical lines. I am completely out of ideas on what to try. It took me a week to figure out how to get it working the first time, but the solution I had isn't working anymore.

  Read the article

• Network connection fails when downloading data

  - by Guus

  In the past few weeks, I've noticed my network connection becoming unstable while downloading files. I'm not sure how to diagnose this issue. I've found that my network connections appear to be temporarily unresponsive (for periods up to a minute or so) while I'm downloading a file (that's large enough to not be downloaded instantly). The problem occurs when downloading data through a webbrowser, but also when using SCP to download data from a remote location. During the period in which network connections are unresponsive, every resource that I try to access over the network is unavailable. This includes: The download itself (SCP reports a 'stalled' download) Web pages (won't load - browsers report 'resource unavailable') SSH sessions (CLI freezes) VPN connections (connections terminate) IM client connections (client starts reconnection attempts) ... (everything is pretty much dead) I've noticed that during such a period, I cannot even access the (web-based) administrative console of the router on my LAN at home (although it remains reachable for other devices). The problem occurs when connected to my home network, but also when I'm in the office. Other devices than my laptop are not affected. Given the above two characteristics I assume the problem cause lies within my laptop, not the network infrastructure. I'm running Ubuntu 11.10. Apart from applying automatic updates from Ubuntu, I can't think of a change that I applied to the OS that could have started the problems. I'm absolutely positive that this issue did not occur up to a few weeks ago (as it's very noticeable, and only started to annoy me in the last few days). When the problem occurs, applications that make use of a network connection fail visibly (I get popups telling me that a VPN connection is broken, for instance). The network manager does not report any issues related to my wifi-connection though. Help?

  Read the article

• recent unreliable wireless connection with Netgear KWGR614 router

  - by gabkdlly

  Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I know that this router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. Is it possible that someone is jamming my signal ?

  Read the article

• Chromebook C720 - issue suspending and booting

  - by user72727

  I recently bought an Acer C720 chromebook (Celeron, 2GB RAM, 16GB SSD) with the intention of loading Linux and using it as a cheap development laptop while on my holiday. The installation sort of went ok but initially the trackpad didn't work so I ran a script that mostly fixed that. My current issues are: Booting: it still goes to the chrome "unknown os" white screen - I have to press ctrl L - then escape then 1 then wait for 30 secs while it seems to be searching for something. Then Ubunto loads up fine. Any idea how to fix this? Suspend: if I close the lid of the laptop then it doesn't seem to suspend properly. At least when I open the lid the screen appears to be on but the screen is blank with a cursor. Nothing responds on the keyboard and I have to hold the power down to restart it. The suspend from the top menu has the same issue. Moving windows: I don't have a mouse click button so how do I move windows around the screen? Launcher bar: I've set mine to auto hide (which it does) but what exactly do you have to do to get it back? I just repeatedly jab the mouse at the side of the screen and eventually it pops up. I don't mind starting all over again but obviously a quick fix is preferred ;) Mike Ubunto 14.04.1 LTS Kernel 3.13.0-32-generic PS Sorry for so many questions.

  Read the article

• 14.04.1 LTS 64 bit from USB does not see my windows 7 when I go to install it

  - by W J

  I suppose this is as much a question as a heads up/warning 14.04.1 LTS only gave me the option of writing over everything on one of my windows 7 machines. If I'd pushed the wrong button and continued I would have lost some mighty important items. On a similar windows laptop I succesfully installed 14.04.1 LTS 32 bit alongside windows 7 rather easily ( and I dig it!), there was a prompt in that case that let me select to install it alongside my windows OS.Yikes, not in this case. This laptop was formatted NTFS, the Ubuntu usb pendrive I formatted fat32. could be a clue? It looks like there is an advanced install ubuntu, but I am not that advanced. I may try to use windows diskformat (What fdisk is gone?) to make a partition, then see if the ubuntu on my usb stick "sees" my windows. If anybody has a better plan let me know. Mahalo AHA!? p.s. its a SSD harddrive, perhaps thats the crux?

  Read the article

• Windows Randomly Stop Accepting Input from Bluetooth Keyboard

  - by dragonmantank

  I've got a laptop running Ubuntu 11.10 with the most recent updates and an Apple Wireless Keyboard that syncs via bluetooth. The Ubuntu box is also a Synergy server, using QuickSynergy to run Synergy. I'm using xmodmap to swap the option and command keys, but nothing else. Throughout the day, windows that are long running will just stop accepting input. For example, I leave gnome-terminal up and running almost 24 hours a day. If it sits for a while, it just stops accepting input. It doesn't matter if I'm ssh'd into another machine or sitting on a local tty session, it just stops accepting input. If I open a new tab or window, those work fine. The 'broken' tabs stay broken. I'm also running Turpial (a Twitter client) which will do that same thing. I tend to use the arrow keys to navigate, and it just stops accepting input. Closing it and reopening it causes it to work fine. I don't seem to have the problem in Chrome, but I tend to open up new tabs when I go somewhere instead of using existing tabs. I've updated all the packages, rebooted, and the only thing that seems to cure it is if I type on the built-in keyboard, the window will start to accept text from the bluetooth keyboard (until it stops again). I don't think the keyboard is disassociating from the laptop because it can happen while I'm using the keyboard, it seems more linked with windows that I sit for a long time. As an example, I'm typing in Chrome with the bluetooth keyboard but I have a terminal window that won't accept input.

  Read the article

• dual monitors and unity - ati radeon cards

  - by michiel

  I have a vaio laptop with an ATI Radeon video card and an external screen. I used to run dual monitors on Ubuntu 10.10 fine, but recently decided to upgrade to 11.10 via 11.04 I don't think it's the video card or the fglrx driver. It seems to be unity. When I start up, the laptop screen is normal and the external screen is all white, although I can move my mouse over it. However, the cursor becomes the big X that used to be cursor of the first versions of Xwindows. I can right click on it, and it brings up the context menu for the desktop. And then, all of a sudden, it shows my desktop background. I can continue to move my mouse over the external screen, and now the cursor is normal (little white arrow). But I can't do anything any longer (not even the context menu as before), and trying to drag a window to it (which always worked on 10.10) doesn't work. I actually really like unity. It gives me the most our of my desktop, and uses all space available, which is great. But how can I get my second screen back? I tried unity 2D, but the result is the same. Edit: I think I stumbled on this bug: https://bugs.launchpad.net/ubuntu/+source/nvidia-settings/+bug/882143

  Read the article

• Windows 7 and Ubuntu Boot/Corruption Problems

  - by Kiraisuki

  I searched around, but I couldn't find the answer to why Windows 7 Ultimate 64x and Ubuntu 12.04 LTS 64x could'nt live together happily on my Asus G1s-X1 laptop. I had Windows 7 Ultimate 64x installed on the laptop when I bought it (bought it used, it comes with Vista new) and I wanted to try out Ubuntu and see what all the hype about the free OS was. I installed Ubuntu on an external 80GB iomega HDD with Windows 7 on my main drive. They both work fine for about 2-3 weeks, until Ubuntu suddenly is unable to boot. A few days after Ubuntu fails, Windows corrupts majorly (winload.exe, ntkrnlpa.exe, and various others corrupt randomly) and Windows Recovery Environment is completely useless. Booting to a live USB with Ubuntu and trying to reinstall it fails, and trying to wipe the main drive and install it there fails as well (something about my graphics card.) I managed to get Windows 7 Ultimate 64x back up and running (after many disk formats) but now I am left with a broken (and invisible) Ubuntu installation on the external drive. Is there any way to get the broken and non-bootable Ubuntu installation off the HDD without damaging or erasing the many files and programs installed and stored on the 80GB drive?

  Read the article

• 11.10 liveCD black screen

  - by Shaun Killingbeck

  Attempting to install/try ubuntu 11.10 on my new laptop, using a liveCD (and tried USB). I get the purple screen (with the man/keyboard at the bottom) and after that the screen flashes bright white before going black. Ubuntu continues to load in the background, with login sound etc but the screen is off. I have tried as many different solutions as I could find including: using nomodestep, xforcevesa, i915.modeset=0 in boot options (seperately): varying consequences, but either I end up at a blinking cursor with no prompt, a command line (startx fails: no screen found), or the original blank screen again Tried booting from VirtualBox - it crashes at the same place the screen would go blank when using a CD/USB tried 11.04: I don't have this problem BUT when trying to install, I get a ubi-partman error 141 (possibly down to the three partitions that came on my laptop... not sure why HP needed there own separate partition for HP Tools...) Model: HP Pavillion DV6 6B08SA Processor: AMD Quad-Core A6-3410MX APU with Radeon HD 6545G2 Dual Graphics (1.6 GHZ 4 MB L2 cache ) Chipset: AMD RS880M Any help would be greatly appreciated. I just want to be able to partition the drive and install Ubuntu. I'm assuming the issue is graphics card related, although I have no confirmation of that. I have caught a glimpse of some output to do with pulseaudio and [fail], but I can't imagine why that would cause a screen problem and the sound definitely works anyway.

  Read the article

• Touchpad stops working after desktop shows up

  - by gsedej

  Hi! I have problem with touch-pad. It is not working correctly. It goes like this. When laptop is booting, right after desktop shows, I can move mouse with touch-pad for a second, but when icons shows up, touch-pad does not want to move cursor at all. Even buttons stops work. The same problem with Ubuntu 10.04 and Ubuntu 10.10 I can see "Touchpad" tab in "Mouse" menu, and I can even set "two finger scrolling". I checked in gconf-editor under "desktop-gnome-pheriferals-touchpad" and it's enabled. Furthermore I checked xinput and it is as it should be: SynPS/2 Synaptics TouchPad id=11 [slave pointer (2)]. I tried to create new master reattach but still nothing... EDIT: Laptop has fn + F7 to control touch-pad. Ubuntu shows bobble showing touchpad OFF and touchpad ON. But it does nothing. No matter if it say ON, it still does not work.

  Read the article

• WebLogic 12c training in Dutch–May 10th & 11th 2012 Utrecht Netherlands

  - by JuergenKress

  Axis into ICT offers you the opportunity to increase your skills. We are organizing ‘Bring Your Own Laptop Knowledge Sessions‘. In a small group of up to 8 people we are going discuss all the practical aspects of WebLogic Server you ever wanted to know. This is not a standard course, but a training where applying the material in practice is of importance. All participants will receive their own virtual machine, which offers you to ability to continue afterwards with your own practice environment. By keeping the groups small we create an informal atmosphere with plenty of room for all your questions or to even discuss your specific situation. The approach is highly interactive; after all you are attending to increase your knowledge. Topics that will be covered Introduction JVM Tuning Deployment Diagnostic Framework Class Loading Security Configure Resources Clustering Scripting Register for this session You are interested in the ‘Bring Your Own Laptop Knowledge Sessions: WebLogic 12c’? Register for one of two possibilities by using the form below. After registration you will receive a confirmation by e-mail. Training will be in Dutch! Date: May 10 & 11 2012 from 09:30 – 17:00 hrs Location: Axis into ICT Headquarters (Utrecht) Expenses: € 700,- per person (VAT excluded) For registration and details please visit our website. Want to promote your event? Let us know Twitter @wlscommunity! WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Axis,education,WebLogic training,WebLogic,WebLogic Community,OPN,Oracle,Jürgen Kress,WebLogic 12c

  Read the article

• How to have Windows 7 remember a password for a Domain

  - by Kelly Jones

  About eighteen months ago, I wrote a post covering how to clear saved passwords in Windows XP.  This week at work I was reminded how useful it is to not only deleted saved passwords, but to also setup wildcard credentials using this same interface. The scenario that I run into as consultant working at a client site, is that my laptop is not a member of the Windows Domain that my client uses to secure their network. So, when I need to access file shares, shared printers, or even the clients internal websites, I’m prompted for a name and password.  By creating a wildcard entry on my laptop (for the user account that the client issued to me), I avoid this prompt and can seamlessly access these resources.  (This also works when you’ve configured Outlook to access Exchange via RPC over HTTP.) How to create a credential wild card entry in Windows 7: Go to your Start Menu --> Type "user" into the Search box Click on the “Manage your credentials” in the column on the left Click on the “Add a Windows credential” link Enter the Domain (in my case my client’s domain), something like this: *.contoso.com Enter the username and password That’s it.  You should now be able to access resources in that Domain without being prompted for your name and password.  Please note: if you are required to change your password periodically for that domain, you’ll need to update your saved password as well.

  Read the article

• Why does Ubuntu 13.10 not detect my Win7 partition?

  - by goutham

  I'm trying to install Ubuntu 13.10 alongside Windows 7 on my DELL INSPIRON 14z 5423 laptop and I'm new to all of this. I'm using the Ubuntu 13.10 64-bit ISO burned onto a CD. The first time I tried to install it, Ubuntu said it did not detect any other OS, which meant I only had 4 options: Erase disk and install Ubuntu (I don't want to do this) Encrypt new Ubuntu. Use LVM. Something else. If I choose the Something else option, it brings me to the partition menu and says that I have 1 disk with free space of (500Gb), but that's not true because I have Windows 7. I restarted the laptop several times and booted the CD again and I got exactly the same as I did previously. How do fix this problem and install Ubuntu alongside Windows 7? After executing "sudo fdisk -l" command in terminal ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 314574847 157184000 7 HPFS/NTFS/exFAT /dev/sda3 314574848 629147647 157286400 7 HPFS/NTFS/exFAT /dev/sda4 629147648 976771071 173811712 7 HPFS/NTFS/exFAT After removing one partition I executed command once again ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 629145599 314469376 7 HPFS/NTFS/exFAT /dev/sda3 629147648 976771071 173811712 7 HPFS/NTFS/exFAT

  Read the article

< Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >