Search Results

Search found 15882 results on 636 pages for 'similar'.

Page 298/636 | < Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >

• Backup/Multihomed network connection

  - by J_P

  We have a couple locations that require 24/7 access to Internet and our current provider (AT&T) while mostly good is not always up. My concern would be if I go with another provider (for example Comcast) I'm going to be subject to the same down time if it's in the "last mile". I for the most part don't know where the failure points are on the ISP side but I would imagine the large majority are within the last mile. I'd looked at Mifi or similar solution but have concerns about bandwidth caps and overall speed. Any suggestions would be appreciated.

  Read the article

• Site on IIS 7.5 accessible via SSL on server, but not from local network

  - by bnieland

  I have a site set up on IIS 7.5. I added the following binding... type: https Host Name: [Blank] Port: 443 IP Address: 192.168.1.6 Binding Information: [Blank] I can access the site via https://192.168.1.6 from the server itself. When I try to access the site from another machine (193.168.1.4) on the same sub-net via https://192.168.1.6 I get no response. http://192.168.1.6 returns the site as expected. I have used wireshark to examine the packets on the server, the first of which I have included as an image. There were two other packets, very similar to this. There was no response from the server. Any Ideas?

  Read the article

• Fastest security check of file tree on NFS

  - by fungs

  I am currently experiencing very bad performance using the following on an NFS network folder: time find . | while read f; do test -L "$f" && f=$(readlink -m $f); grp="$(stat -c %G $f)"; perm="$(stat -c %A $f)"; done Question 1) Within the loop permissions are checked using the variables grp and perm. Is there a way to lower the amount of disc I/O for these kind of checks over the network (e.g. read all meta data at once using find)? Question 2) It seems like the NFS isn't tuned very well, the same operation on a similar network link via SSHFS take only one third of the time. All parameters are auto-negotiated. Any suggestions?

  Read the article

• Firefox 11.0 Right-Click Dropdown Menu (and Menu Options at Window Top) Flickering - Potential Bug?

  - by nicorellius

  About a week ago my Windows 7 machine starting exhibiting odd Firefox behavior. When I right click on something the drop-down menu flickers and when the mouse is hovering over a field, I can't really see it. This same behavior happens in other ways too, like in the top File, Edit , View, etc menus. I click them and they flicker, when I hover over them, and then they get obscured when I hover over the one I want. I did some research and didn't really find anything. Some people found similar behavior in applications THEY were building. But mine is a global problem. Happens on all sites, as far as I can tell. This is why I suspect it's my Firefox installation. I thought about reinstalling, but if there was another option, I'd like to explore that too. The behavior is not really capture-able, so I don't have anything except words to describe it. Sorry ;-( Thanks.

  Read the article

• Searching for online database software/cms

  - by ButterdBread

  I am searching for a software or CMS that manages and displays large online databases, as some kind of frontend to MySQL or any other database. It should be accessible through the browser, be as secure as possible (offering login). The data I'd like to store would be personal information such as name, adress and birthday - also I'd need to be able to add custom fields as well. Also forms and the possibility to download the data in an excel? table would be great. PHPmyadmin is not an option, it should be similar to a CRM but more closely adapted to managing database tables, searching for entries and filtering data. It should be possible to have many user accounts with different rights, with each of them being able to acces certain parts of the data and entering own data. Is there something out there, that might get close to what I imagine? I appreciate any help!

  Read the article

• WGet a Page that Requires Logging in

  - by Synetech inc.

  I’m trying to figure out a way to use WGET or a similar tool so that I can schedule a web page to be downloaded regularly as a sort of updating log. The problem is that the page requires that I be logged in otherwise I get a different page, generic. Further, the page does not take login information as GET parameters in the URL, it uses POST to log in on the login page and cookies to save the login information that’s read by the regular page. I’m currently using GNU Wget 1.10.2 for Windows. I’ve tried using WGET’s cookie functionality but have had mixed results, usually skewing towards it not working. Can anyone please advise on a way to accomplish this? Thanks a lot.

  Read the article

• Mouse pointer size inconsistent

  - by charon00

  Since installing Ubuntu 12.04, I've been having a problem with the mouse pointer size. On the desktop, it is quite a bit larger than it should be (24), though the different cursors (editing text, hyperlink hand, etc) are correct. The size changes to the correct size when the pointer is over some application windows (GVim, Netbeans, Firefox), but then changes back once it is moved out of the window. There was a similar question here, but the Xdefaults solution did not work for me, and I didn't want to try the one requiring editing the icon image. In addition, I've tried changing the cursor theme using sudo update-alternatives --config x-cursor-theme as well as using the dconf-editor, but though I can change the theme, the size issue remains. In case it's relevant, I'm running on a dual-screen setup with monitor sizes of 2560x1600 and 1920x1080, using the NVidia video driver. Is there another way to control pointer size, or a setting that might be messing it up? EDIT: These are the values/options I have for update-alternatives and in dconf-editor. I'm now wondering if Netbeans and Firefox are making the mouse pointer smaller than it should be, but I'm not sure how big 24 should be... update-alternatives: Selection Path Priority Status ------------------------------------------------------------ 0 /usr/share/icons/DMZ-White/cursor.theme 90 auto mode 1 /etc/X11/cursors/core.theme 30 manual mode 2 /etc/X11/cursors/handhelds.theme 20 manual mode 3 /etc/X11/cursors/redglass.theme 20 manual mode 4 /etc/X11/cursors/whiteglass.theme 20 manual mode * 5 /usr/share/icons/DMZ-Black/cursor.theme 30 manual mode 6 /usr/share/icons/DMZ-White/cursor.theme 90 manual mode dconf-editor: I can't post the image since I'm a new user but the cursor-size is set to 24 and the cursor-theme is DMZ-Black.

  Read the article

• No grub selection after installing kernel Ubuntu 14.04

  - by CPJ

  I have installed a new kernel on my system which can be found by grub but when I restart I can only select the old kernel. Things I tried in other threds with similar problems didn't help. sudo update-grub gives Generating grub configuration file ... Found linux image: /boot/vmlinuz-3.15.0-031500rc2-lowlatency Found initrd image: /boot/initrd.img-3.15.0-031500rc2-lowlatency Found linux image: /boot/vmlinuz-3.15.0-031500rc2-generic Found initrd image: /boot/initrd.img-3.15.0-031500rc2-generic Found linux image: /boot/vmlinuz-3.13.0-24-generic Found initrd image: /boot/initrd.img-3.13.0-24-generic Found memtest86+ image: /boot/memtest86+.elf Found memtest86+ image: /boot/memtest86+.bin done However, afer a reboot I can only choose the 3.13 kernel. Any ideas what happened? I I have a full encrypted hard drive so maybe I have overseen something while installing the new kernel to get this work? The grub config file is GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT_QUIET=false GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="" GRUB_ENABLE_CRYPTODISK=1 Any ideas? Thanks.

  Read the article

• Oneric Aspire One. After latest 11.10 update to Linux 3.0.0-9 boot hangs at staement "Starting Bluetooth"

  - by hevh

  I have today updated the version of Linux on Ubuntu on my Acer Aspire One. The boot hangs on the statement "Starting Bluetooth". Help please!! EDIT1: I get the grub menu when I start the netbook and it doesn´t matter which version of linux I choose the resulkt is the same. It gets as far as the Ubuntu spash screen then drops into command line mode then hangs on the line "Starting Bluetooth". I can log in and have tried various forms of the apt-get command to fix the system but with no result. I do not need bluetooth at the moment and so could remove the application if I knew how. (have tried apt-get remove bluez). When I use the command sudo apt-get -f install I get an error message saying "There's not enough space in /var/lib/mysql/" folowed by several other error messages. I have spent some time looking for similar problems and solutions using google but so far got to nothing to help. Thanks EDIT2: I have since discovered when running Knoppix or slitaz from a usb stick that the file managers report the hard disc as having no space. However GPARTED reports it as having 3.69gb. I do recall making space on the hard drive by deleting some old files and emptying trash whilst the update was running; perhaps its related. Any suggestions for how I can recover the apparently lost space from hard disc without losing the data. I have backups of the actual data but do not wnat to lose the applcations configuration. Thanks Kev

  Read the article

• How can I speed up boot on one of my machines?

  - by Korneel Bouman

  I have a Gateway all in one machine (2 gig Intel Core 2 Duo T7250 dual core processor, 2 gig RAM - full specs) on which I installed 10.10. Once it has booted it's fine, but it takes forever to boot. This is what happens: 1. Boot starts with cursor flashing for about 10-15 seconds 2. Cursor disappears for 1.5 - 2 minutes 3. Cursor reappears, blinks a few seconds more, boot finishes in another 10 seconds 4. Login screen I have another machine with marginal better specs that boots up in no time (basically the above minus the two minute delay). Things I've done: enabled verbose mode for grub nothing is showing until after 2 minute pause. checked syslog last message before pause is a message from alsa saying the process is already running (or something similar... going from memory here...) It could be something sound related as the built in speakers are not working (sound card is recognized though and headphones work). Anyway, it's not the end of the world, but it's annoying and I'd like to know what's going on... Many thanks, and let me know if more info is needed.

  Read the article

• How to synchronize tasks on multiple computers

  - by SysGen

  I would like to be able to run similar tasks on several computers that must be precisely synced. More specifically I need 4 laptops to be synced, probably over local network, and I need to use one of them to start a task (play a video) on all of them at the same time (different video files on different laptops). All of them are running Windows. Is there a third-party software or any easier way to do so over LAN without significant delay? I need virtually no response time - if there would be a single video streaming on all laptops then people should not recognize the delay.

  Read the article

• Versioning files in Windows XP

  - by Mike Cole

  I would like to set up an archive folder in Windows XP that would allow me to drop several different versions of the same file, and have it store each version. I would envision this to work similar to the recycle bin, where you can drop the same file 10 times and it stores each version. Anybody know how I can do this? Thanks! Edit: Using a Version Control System is complete overkill for this situation. I may just write a script that appends a date/time stamp to the file when added to the folder.

  Read the article

• Lenovo N100 and Samsung SSD 830, shouldn't this go faster than 100MB/s?

  - by Jook

  I recently upgrated my Lenovo N100 0768 with a Samsung SSD 830 - specified to support 520 MB/s read and 320MB/s write. However, having only SATA1 with max. of 150MB/s speed, it has to run in a slower mode - of course. But, shouldn't it be more on the edge of this limit than ranging between 90-115MB/s and averaging around 103MB/s? Or is this really as much as I can expect? Tested with HD-Tach. Has anyone comparable results on a SATA1 controller with a SSD drive faster than SATA1? Preferably similar to the Samsung 830?

  Read the article

• Web map services displaying poorly

  - by user29261

  Web map services no longer display correctly in ArcGIS and Google Earth - no one else on network is experiencing these. Using windows 7 OS. These problem began abruptly (1 day they were working, the next they were not). Specific problems include not displaying at all; correct display on 10% of the monitor and repeating lines of coloured squiggles and text on the remaining 90%; and small, widely spaced, pixels in place of colour fill. Links where this occurs: arcgis http://wms.ess-ws.nrcan.gc.ca/wms/toporama_en Google earth http://openmaps.gov.bc.ca/kml/BCGov_Web_Map_Library.kml I can't pinpoint any changes to the computer setup which may have prompted this, however, adding arcgis 10.1 SP 1 occured around the same time. Probably just a coincidence. Anyone had similar problems? or solutions to these? Thanks for any thoughts. Jim

  Read the article

• Router for Infrastructure Network

  - by amfortas

  We have an HPC operation that down the years has grown to several racks of gear at three sites, hooked up via Gigabit fiber and Catalyst 2960s (we control the links and switches). Thus far all machines have been on a flat RCF1918 10/8 but we are looking to segment the network in order to streamline matters for iSCSI and generally keep infrastructure equipment away from our end-users. We have now reached a point where we need to consider introducing VLANs for specific subnets and are wondering if it would be worthwhile in the longer run to acquire a small router to keep to keep track of all this stuff and cut down on the complexity of netmasks and routes on host machines, etc. Has anyone here had a similar experience? Suggestions as to suitable equipment would be welcome.

  Read the article

• How to build a "traffic AI"?

  - by Lunikon

  A project I am working on right now features a lot of "traffic" in the sense of cars moving along roads, aircraft moving aroun an apron etc. As of now the available paths are precalculated, so nodes are generated automatically for crossings which themselves are interconnected by edges. When a character/agent spawns into the world it starts at some node and finds a path to a target node by means of a simply A* algorithm. The agent follows the path and ultimately reaches its destination. No problem so far. Now I need to enable the agents to avoid collisions and to handle complex traffic situations. Since I'm new to the field of AI I looked up several papers/articles on steering behavior but found them to be too low-level. My problem consists less of the actual collision avoidance (which is rather simple in this case because the agents follow strictly defined paths) but of situations like one agent leaving a dead-end while another one wants to enter exactly the same one. Or two agents meeting at a bottleneck which only allows one agent to pass at a time but both need to pass it (according to the optimal route found before) and they need to find a way to let the other one pass first. So basically the main aspect of the problem would be predicting traffic movement to avoid dead-locks. Difficult to describe, but I guess you get what I mean. Do you have any recommendations for me on where to start looking? Any papers, sample projects or similar things that could get me started? I appreciate your help!

  Read the article

• about Linux read/write only permissions

  - by Bimal

  My question looks similar to another thread: Linux directory permissions read write but not delete Here, I want to create a directory where I can give the permissions like: A user can create/upload any files. A user can re-upload and overwrite the files. A user cannot remove the file anymore. I am on CentOS 5.5, basic user only. How can I do that? Or is there any third party software that can be installed to do this? Or, create a new process which will lock the permissions right after a new file is uploaded via ssh?

  Read the article

• IE session (-nomerge) manager

  - by skrco

  I'm looking for an application that can manage (save/open) multiple Internet Explorer instances (to be precise nomerge sessions), host them in single window and arrange these instances e.g. in tabs, so in result you have double tab bar. In functionality it's similar to Remote Desktop Manager, where you can create Web session, but in embedded mode you cannot set the nomerge option. I've been searching the web, but with no results. So I put this question whether anyone know of such application or workaround. Or I have to write my own app.

  Read the article

• After upgrade to 12.04 wireless keeps dropping on BCM4312

  - by Sheket

  I know there are plenty of questions very similar to these, but I've tried practically everything and it still isn't working. Some solutions get the wireless connection working, but it goes very slow and drops after a few minutes. Then it won't reconnect and keeps asking for password. Hope you can help me. Thanks in advance. This is the output for sudo lshw -C network *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:f0300000-f0303fff *-network description: Ethernet interface product: AR8132 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth1 version: c0 serial: 00:23:5a:9b:6e:b1 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.0.106 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:42 memory:f0200000-f023ffff ioport:a000(size=128) *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: 00:24:2c:83:f0:81 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-30-generic firmware=478.104 link=no multicast=yes wireless=IEEE 802.11bg And for lsmod | grep b43 b43 342643 0 mac80211 436455 1 b43 cfg80211 178679 2 b43,mac80211 bcma 25651 1 b43 ssb 50691 1 b43 And for rfkill list 5: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• MS 2008 R2 Drops Remote Desktop Sessions in 10 seconds or less every time

  - by mike42

  I'm adding a new 64-bit server to our domain. Everything seems fine except when accessing the machine using remote desktop, after a few seconds the connection is lost. The error message is "This computer can't connect to the remote computer." "Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator." A similar result with Telnet on port 3389. I am able to connect but if I hit a key the connection to host lost. The event log shows the successful login. No errors. Any ideas?

  Read the article

• I lost /dev/md2 on my server

  - by sten

  Hi, My 2 hard drives fried at the same moment apparently. My host company rebooted my server in rescue mode and I am trying to recover my data. They told me to mount /dev/sda2 to recover the data I need but, looking at a similar server that I have in pool, the data I'm looking for should be instead in /dev/md2. I can find /dev/md0 but not /dev/md2 (nor /dev/md1). I've looked on several places on the web and I could only find messages explaining how to create new partition. I just need to recover some data, not all of it and I'll be glad if anyone could help me to mount the /dev/md2 folder (or any other trick that would allow me to recover the data that was stored there). Thanks in advance, Sten

  Read the article

• Triple head DVI KVM

  - by cat pants

  I am trying to run a Linux desktop and Windows desktop simultaneously with a KVM for maximum productivity. Also running three monitors. I need a KVM that can do 3x DVI @ 1920x1080 + 2x usb (mouse and keyboard) + toslink for two machines. What would you suggest? I ask on here because I have searched quite a bit and have yet to find a KVM with these requirements. (I would be open to something like modifying 3x regular KVMs to control them with one button or similar) Thanks! (I tried posting this question earlier, but it was closed as being "not related to computer hardware or software" ... is a KVM not related to computer hardware or software? I'm pretty sure it is. kvm-switch has been tagged 100 times on here for example.)

  Read the article

• rigidbody2d.Addforce( ) behaves wieirdly unity 4.3 [on hold]

  - by Lilz Votca Love

  So guys ive edited the question and here is what my problem is i have a player which has a rigidbody2d attached to it.my player is able to doublejump in the air nicely and stick to walls when colliding with them and slowly slides to the ground.All movement is handle through physics and no transform manipulations.here i did something similar to this in the FixedUpdate of my player. void FixedUpdate() { if(wall && Input.GetButtonDown("Jump")) { if(facingright)//player is facing the left side of the wall { rigidbody2D.Addforce(new vector2(-1f,2f)*jumpforce); /*Now the player should jump backwards following this directional vector and should follow a smooth curve which in this part works well*/ } else { rigidbody2D.Addforce(new vector2(1f,2f)*jumpforce); /*Now this is where everything gets complicated as you should have noticed this is the same directional vector only the opposite x axis value and the same amount of force is used but it behaves like the red curve in the picture below*/ } } } bad behaviour and vector in red .I tested the same thing(both addforce methods) for a simple jump and they exactly behave like mentionned above in the picture.so here is my problem.Jumping diagonally forward with rigidbody2d.addforce() do not have the same impact,do not follow the same curve as jumping the opposite direction with the same exact amount of force.if i could fix this or get past this i could implement a walljump system like a ninja jumping in zigzag between two opposite wall to climb them.Any ideas or alternatives?

  Read the article

• Enterprise Data Center System Admin/Engineer to Server Ratio

  - by Bob

  I know there have been similar questions asked over the last few months however looking at a Data Center Operations and know there are some really smart people out there that might be able to help. Looking for some staffing best practices based on first hand experience and was hoping that there is some experience in this area that can provide "best practice" application: Three High Availability (99.99% plus) Enterprise Level Data Centers geographically dislocated, one manned 24x7x365, one lights out, one co-location running HOT-HOT-HOT supporting a global community. More than 2,000 operating systems consisting of 95% Windows, 5% Linux and Solaris, 45% virtualized, more than 100TB storage. No desktop support, no Network Administration (administrated separately), running N+1 and serving more than 250 Billion page views annually. Based on experience what has been your experience with Server to "Data Center System Administrator/Engineer" ratio? Thanks in advance for your responses.

  Read the article

• how to know which display number for the variable DISPLAY to be exported when ssh to server

  - by insidepower

  When i ssh to server using -X, i always confuse about which display number i should export. It seems to me sometimes the display number has been used by something, so what i can do is only export DISPLAY=localhost:0 && xclock export DISPLAY=localhost:1 && xclock export DISPLAY=localhost:2 && xclock export DISPLAY=localhost:... until the clock appear. Then i will use that display number. Each time log in to the server, the display number which is able to tunnel the gui data correct would be different. I know many of such similar questions has been asked and answer. However I couldn't find answer to my question, anyone know about it? Thanks!

  Read the article

< Previous Page | 294 295 296 297 298 299 300 301 302 303 304 305  | Next Page >