Search Results

Search found 19788 results on 792 pages for 'remote host'.

Page 299/792 | < Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >

  • Getting a lot of postmaster undeliverable notices for non-existent users

    - by Mike Walsh
    I've had my domain (straightpathsql.com) for a few years now. I host my e-mail with Google Accounts for business and have for awhile. ALl of the sudden in the past week I am starting to get a lot of postmaster delivery fail notices from various domains, most of them involving bogus e-mail addresses at my domain ([email protected], for example)... My assumption here is that someone is trying to relay on some other host (not my hosts which are secure through google apps for business, I presume) and there isn't much I can do to stop it. But I just want to make sure there isn't something else I need to be looking at here.. An example delivery fail notice is below.. I know nothing of those addresses below and they look like garbage... (Quick edit: the reason I get these messages is I set myself up as a catch all, so it doesn't matter what e-mail you send a note to at my domain, I'll get it if the account isn't setup... All of the failure messages are sent to bogus addresses on my domain) The following message to <[email protected]> was undeliverable. The reason for the problem: 5.1.0 - Unknown address error 553-'sorry, this recipient is in my badrecipientto list (#5.7.1)' Final-Recipient: rfc822;[email protected] Action: failed Status: 5.0.0 (permanent failure) Remote-MTA: dns; [118.82.83.11] Diagnostic-Code: smtp; 5.1.0 - Unknown address error 553-'sorry, this recipient is in my badrecipientto list (#5.7.1)' (delivery attempts: 0) ---------- Forwarded message ---------- From: Howard Blankenship <[email protected]> To: omiivi2922 <[email protected]> Cc: Date: Subject: Hi omiivi2922

    Read the article

  • PeopleSoft RECONNECT Conference Unites the PeopleSoft Community

    - by Marc Weintraub
    The PeopleSoft team is looking forward to participating in this new PeopleSoft deep dive conference from the Quest International Users Group.  We’ve worked diligently with the leadership of Quest’s PeopleSoft Special Interest Groups (SIG’s) and Regional User Groups (RUG’s) to make sure this national user event delivers PeopleSoft content that meets the needs of the PeopleSoft community. The inaugural PeopleSoft RECONNECT conference will be held August 27-29, 2012 in Hartford Connecticut.  Through our Product Strategy, Development and Support teams Oracle will provide support for education sessions in these key tracks: Human Capital Management (HCM) Financials (FMS) Supplier Relationship Management (SRM) Supply Chain, Manufacturing & Distribution (SCM) Project Costing Applications Technology (PeopleTools) Oracle will host a general session from John Webb, plus roadmap sessions for the major PeopleSoft product areas.  We will also host enhancement discussions for our key PeopleSoft solutions allowing participants to contribute to the future of PeopleSoft through an interactive forum.  All of this is part of the 100+ education sessions being offered by the customer and vendor community.   There’s a lot of buzz around this conference, so don’t delay in registering key members of your team today.  We look forward to seeing you there so register NOW!

    Read the article

  • Tinkerforge Rotation/LCD & JavaFX Plans

    - by Geertjan
    The first time I integrated two Tinkerforge bricklets, the day before yesterday, was pretty cool: import com.tinkerforge.BrickMaster; import com.tinkerforge.BrickletLCD20x4; import com.tinkerforge.BrickletRotaryPoti; import com.tinkerforge.IPConnection; import java.util.Calendar; public class TFConnectionDemo { private static final String HOST = "localhost"; private static final int PORT = 4223; private static final String MASTERBRICKUID = "somethingabc"; private static final String LCDUID = "somethingabc"; private static final String ROTIUID = "somethingabc"; private static IPConnection ipc; private static BrickMaster master = new BrickMaster(MASTERBRICKUID); private static BrickletLCD20x4 lcd = new BrickletLCD20x4(LCDUID); private static BrickletRotaryPoti poti = new BrickletRotaryPoti(ROTIUID); public static void main(String[] args) { try { ipc = new IPConnection(HOST, PORT); ipc.addDevice(master); ipc.addDevice(lcd); ipc.addDevice(poti); poti.setPositionCallbackPeriod(50); poti.addListener(new BrickletRotaryPoti.PositionListener() { @Override public void position(short position) { lcd.clearDisplay(); Calendar cal = Calendar.getInstance(); lcd.writeLine((short) 0, (short) 0, cal.getTime().toString()); lcd.writeLine((short) 1, (short) 0, "Rotation: " + position); } }); } catch (Exception e) { } } } The result is that the display text in the LCD bricklet changes while I turn the rotation bricklet: Now imagine that you have some JavaFX charts and, while you turn the rotation bricklet (i.e., the dial thing that I'm turning above), the values of the charts change. That would be pretty cool because you'd be able to animate the JavaFX charts by rotating an object externally, i.e., without even touching the keyboard. That would be pretty cool to see and shouldn't be hard to implement.

    Read the article

  • Where to store global enterprise properties?

    - by shylynx
    I'm faced with a crowd of java applications, which need different global enterprise wide properties for operation, for example: hostname of the central RDBMS, hostname and location of the central self-service portal, host location of central LDAP, host location of central mail server etc. Formally we build each application with a properties file, where all this properties are definied. But that's a very bad solution, because if the hostname of the mail server changes, we need to change the properties files for each application and deploy all applications again. Our idea is to centralize this properties, so that each application can ask for each property at runtime, for example: Idea: Put the properties file to an easy accessible file share. So if we need to change a property, each application uses the new properties. Idea: Put the properties to database. Main disadvantage: we need a dependency to database client libraries for each application. Idea: Put all applications into one big application server, that provides system properties for each application. Main disadvantage: needs deployment of each application to one application server. But that isn't a realistic scenario. Idea: Webservice that provides global enterprise wide properties. Main disadvantage: not very secure, because some properties are passwords or user credentials. What other alternatives are recommended? What is state of the art?

    Read the article

  • Why is "googlehosted.com" in the DNS records for our website after signing up for DDOS protection?

    - by Blake Nic
    Recently we had to get some DDOS protection for our website because of the large attacks we were seeing after getting a bit of popularity. We handed over our domain and hosting information to our DDOS protection provider. It worked perfectly but I have a question. On our DNS records we have the Host and Answer and Type. The host has our domain name there. The answer is this: SOMETEXTXXXX.dv.googlehosted.com. And when I copy and paste it into my browser it gives me a 404 error. But our website still loads and functions as it should. I don't understand why it would need this? I asked them about this and they said it is a method for DDOS protection and the other IPs are the reverse proxy (the other IPs give a 404 error too). Can anyone expand on this more please. How does all this tie in together and make the internet browser know where to point the person with all these reverse proxies and stuff I don't understand. Here is an image for reference:

    Read the article

  • Alt+Tab doesn't work when Citrix is in full screen

    - by porec
    I am using 12.04 and in my work we connect to a Citrix XenDesktop. I've installed Citrix Receiver, using this link and it all works perfectly. But, I have a problem. Alt+Tab doesn't work in full screen mode. There are several adjustments you can choose when login in, with the Settings "button" up in the right corner. (Sorry, I couldn't post an image because I'm new.) I like to work with 95% full screen, with the windows key combination in "full screen mode only". This allows me to use the windows combinations when a work in full screen, inside the remote computer (inside Citrix). I can Alt+Tab past the "Citrix computer" when I put it down to 95%. It also allows me to use the "Ubuntu menu" on the left side. But I really can't make this work in Ubuntu. I've tried to put the windows key combination to "remote server only" and yes, it works inside the server, but also only there and the Ubuntu menu stops working. (in example print Screen. I am using this for documentation.) When I try to Tab from one place to another, even when Citrix isn't in full mode, if I stop there and the continue "tabbing" it continues inside Citrix. I want to use windows key combination, but only in full screen mode. Does anyone have a solution to fix in another way?

    Read the article

  • CodePlex Daily Summary for Saturday, September 29, 2012

    CodePlex Daily Summary for Saturday, September 29, 2012Popular ReleasesWindows 8 Toolkit - Charts and More: Beta 1.0: The First Compiled Version of my LibraryPDF.NET: PDF.NET.Ver4.5-OpenSourceCode: PDF.NET Ver4.5 ????,????Web??????。 PDF.NET Ver4.5 Open Source Code,include a sample Web application project.D3 Loot Tracker: 1.4: Session name is displayed in the UI. Changes data directory for clickonce deployment so that sessions files are persisted between versions. Added a delete button in the sessions list window. Allow opening of the sessions local folder from the session list widow. Display the session name in the main window Ability to select which diablo process to hook up to when pressing new () function BUT only if multi-process support is selected in the generals settings tab menu. Session picker...WPUtils: WPUtils 1.2: Just fixed an issue related to isolated storage path for ChoosePhotoBehavior. Specifically CreateDirectory method only accepts relative path, but was given a "/photos/" path which would result in exception. Please make sure you have this fix if you are using ChoosePhotoBehavior! NOTE: Windows Phone SDK 7.1 or higher is required.CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor 1.1 Beta: Visual Ribbon Editor 1.1 Beta What's New: Fixed scrolling issue in UnHide dialog Added support for connecting via ADFS / IFD Added support for more than one action for a button Added support for empty StringParameter for Javascript functions Fixed bug in rule CrmClientTypeRule when selecting Outlook option Extended Prefix field in New Button dialogFree Aspx Image Gallery: Free Aspx Image Gallery Release V1: This is first basic release of my free aspx image gallery project. It is free to use and modify by the user without any need of providing any credit to me.Simple Microsoft Excel Document Converter (Convert To XLS, XLSX, PDF, XPS): ExcelDocConverter 0.1 Beta: Initial Release Microsoft Excel Documents Converter. Microsoft Excel 1997-2003 (XLS) Microsoft Excel 2007/2010 (XLSX) Portable Document Format (PDF) Microsoft XPS Document (XPS) Difference between NET2.0 and NET3.5 This program uses .NET Framework runtime library to run. Basically, they are no differences. Only the runtime library version is different. For older computers, i.e. Windows XP, might not have .NET Framework 3.5 installed, then use NET2.0 in stead. But, some Windows XP SP2 mig...Chaos games: Chaos games: Small app for generating fractals using chaos games[ITFA GROUP] CODE GENER: Code Gener 3.0 Final (Professional for .NET): Code Gener 3.0 Final (Professional for .NET) ReleaseTumblen3: tumblen3 Version27Sep2012: updated: instagram viewerVisual Studio Icon Patcher: Version 1.5.2: This version contains no new images from v1.5.1 Contains the following improvements: Better support for detecting the installed languages The extract & inject commands won’t run if Visual Studio is running You may now run in extract or inject mode The p/invoke code was cleaned up based on Code Analysis recommendations When a p/invoke method fails the Win32 error message is now displayed Error messages use red text Status messages use green textMCEBuddy 2.x: MCEBuddy 2.2.16: Changelog for 2.2.16 (32bit and 64bit) Now a standalone remote client also available to control the Engine remotely. 1. Added support for remote connections for status and configuration. MCEBuddy now uses port 23332. The remote server name, remote server port and local server port can be updated from the MCEBuddy.conf file BUT the Service or GUI needs to be restarted (i.e. reboot or restart service or restart program) for it to take effect. Refer to documentation for more details http://mce...ZXing.Net: ZXing.Net 0.9.0.0: On the way to a release 1.0 the API should be stable now with this version. sync with rev. 2393 of the java version improved api better Unity support Windows RT binaries Windows CE binaries new Windows Service demo new WPF demo WindowsCE Hotfix: Fixes an error with ISO8859-1 encoding and scannning of QR-Codes. The hotfix is only needed for the WindowsCE platform.MVC Bootstrap: MVC Boostrap 0.5.1: A small demo site, based on the default ASP.NET MVC 3 project template, showing off some of the features of MVC Bootstrap. This release uses Entity Framework 5 for data access and Ninject 3 for dependency injection. If you download and use this project, please give some feedback, good or bad!menu4web: menu4web 1.0 - free javascript menu for web sites: menu4web 1.0 has been tested with all major browsers: Firefox, Chrome, IE, Opera and Safari. Minified m4w.js library is less than 9K. Includes 21 menu examples of different styles. Can be freely distributed under The MIT License (MIT).Rawr: Rawr 5.0.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Coevery - Free CRM: Coevery 1.0.0.26: The zh-CN issue has been solved. We also add a project management module.VidCoder: 1.4.1 Beta: Updated to HandBrake 4971. This should fix some issues with stuck PGS subtitles. Fixed build break which prevented pre-compiled XML serializers from showing up. Fixed problem where a preset would get errantly marked as modified when re-opening the encode settings window or importing a new preset.BlackJumboDog: Ver5.7.2: 2012.09.23 Ver5.7.2 (1)InetTest?? (2)HTTP?????????????????100???????????Player Framework by Microsoft: Player Framework for Windows 8 (Preview 6): IMPORTANT: List of breaking changes from preview 5 Added separate samples download with .vsix dependencies instead of source dependencies Support for FreeWheel SmartXML ad responses Support for Smooth Streaming SDK DownloaderPlugins Support for VMAP and TTML polling for live scenarios Support for custom smooth streaming byte stream and scheme handlers Support for new play time and position tracking plugin Added IsLiveChanged event Added AdaptivePlugin.MaxBitrate property Add...New Projects1325: amosaidhauidhaudhawud1326: sefsefsfsfefAggravation: A computer version of the classic board game Aggravation. This was built in Silverlight 4, and makes use of Prism and Behaviors. bjyxl: A project for practice my exchallange.BombaJob-WP: Windows Phone app for BombaJob.bg website. Available at GitHub too - https://github.com/supudo/BombaJob-WPDNN Module Creator: DNN Module Creator allows you to simply and easily create custom DotNetNuke modules directly from within the DotNetNuke CMS environment.Knuth Bit Operations: C# implementation of most of the bit operations from Volume 4A of "The Art of Computer Programming" by Donald Knuth.Machine Factory: Machine Factory is a PowerShell script module, which allows you to automate VHD-based deployment and configuration of virtual and physical machines.Neolog-WP: Neolog.bg official app for Windows Phone http://www.neolog.bg/Ngi.Scada: Ngi.ScadaPaging SharePoint ListItems using listitems position: This is a console application which will display the listitems in a paged manner using the SharePoint listitems position.Pentagon-XnaGamePrototype: Pentagon is a small prototype of a Xna and F# top-down shmup, made for an exam of the Master of Game Development in the University of Verona.Sharepoint sample - using feature upgrade: Sample demonstrating the use of SharePoint feature upgrades to add a new web part to existing pages, and add a new page to existing sites.Simple Permutations: A simple static class to provide easy to use extension methods to objects of type IEnumerable<T> which can generate Permutations and Combinations.SP SIN: SP SIN (from SharePoint Script/Style INjector) solves an age-old problem for developers and administrators; how to add script and style sheet resources to ShareTEST56: A simple Testtestproject0928: dfgdfgdThe Escape: The Escape is a 3D-First-Person Game written completely in XNA(C#).TreeViewWebPartForDocLib: ?????????????Web?????。 ????????????。?????、????????????????。Tube++: The one and only youtube HD player /downloader for your PC . Windows XP/ Windows 7 / Windows 8 / Window Server 2003 / Windows server 2008 / Windows Server 2012Unique SMS: This is a Unique School Management System Project.Who Is Watching Your Site: Who Is Watching Your Site is new!WinRTTriggers: WinRT Triggers - much like Expression triggers in Silverlight, but for WinRT Windows Store applications,

    Read the article

  • JMX Monitoring of GlassFish Servers

    - by tjquinn
    Did you ever wonder what this message in your GlassFish server.log file means? JMXStartupService has started JMXConnector on JMXService URL service:jmx:rmi://192.168.2.102:8686/jndi/rmi://192.168.2.102:8686/jmxrmi It means you can monitor any GlassFish server process, remotely or locally, using any standard Java Management Extensions (JMX) client.  Examples: jconsole or jvisualvm.   Copy the part of the log message that starts with "service:" into the Add JMX Connection dialog of jvisualvm:  or into the New Connection dialog of jconsole: (The full string is truncated in the on-screen display, but if you copied from the server.log and pasted into the form it should all be there.) The examples above are for a DAS, and your host will probably be different.   The server.log files for other GlassFish servers (instances) will have similar log entries giving the JMX connection string to use for those processes.  Look for the host and/or port to be different. Note a few things about security: Here we've assumed you are using the default admin username and password.  If you are not, just enter a valid admin username and password for your installation.  Once connected, you have normal access to all the JVM statistics and controls. You can use JMX clients that support MBeans to view the GlassFish configuration.  When you connect to the DAS, you can also change that configuration, but you can only view configuration when you connect to an instance. To use a JMX client on one system to connect to a GlassFish server running on another system, you need to enable secure admin if you have not already done so: asadmin change-admin-password (respond to the prompts) asadmin enable-secure-admin asadmin restart-domain (as prompted in the output from enable-secure-admin)

    Read the article

  • Javascript form validation - what's lacking?

    - by box9
    I've tried out two javascript form validation frameworks - jQuery validation, and jQuery Tools validator - and I've found both of them lacking. jQuery validation lacks the clear separation between the concepts of "validating" and "displaying validation errors", and is highly inflexible when it comes to displaying dynamic error messages. jQuery Tools on the other hand lacks decent remote validation support (to check if a username exists for example). Even though jQuery validation supports remote validation, the built-in method requires the server to respond in a particular format. In both cases, any sort of asynchronous validation is a pain, as is defining rules for dependencies between multiple inputs. I'm thinking of rolling my own framework to address these shortcomings, but first I want to ask... have others experienced similar annoyances with javascript validation? What did you end up doing? What are some common validation requirements you've had which really should be catered for? And are there other, much better frameworks out there which I've missed? I'm looking primarily at jQuery-based frameworks, though well-implemented frameworks built on other libraries can still provide some useful ideas.

    Read the article

  • github team workflow - to fork or not?

    - by aporat
    We're a small team of web developers currently using subversion but soon we're making a switch to github. I'm looking at different types of github workflows, and we're not sure if the whole forking concept in github for each developer is such a good idea for us. If we use forks, I understand each developer will have his own private remote & local repositories. I'm worried it will make pushing changesets hard and too complex. Also, my biggest concern is that it will force each developer to have 2 remotes: origin (which is the remote fork) and an upstream (which is used to "sync" changes from the main repository). Not sure if it's such a easy way to do things. This is similar to the workflow explained here: https://github.com/usm-data-analysis/usm-data-analysis.github.com/wiki/Git-workflow If we don't use forks, we can probably get by fine by using a central repo creating a branch for each task we're working on, and merge them into the development branch on the same repository. It means we won't be able to restrict merging of branches and might be a little messy to have many branches on the central repository. Any suggestions from teams who tried both workflow?

    Read the article

  • CodePlex Daily Summary for Sunday, October 07, 2012

    CodePlex Daily Summary for Sunday, October 07, 2012Popular ReleasesJson.NET: Json.NET 4.5 Release 10: New feature - Added Portable build to NuGet package New feature - Added GetValue and TryGetValue with StringComparison to JObject Change - Improved duplicate object reference id error message Fix - Fixed error when comparing empty JObjects Fix - Fixed SecAnnotate warnings Fix - Fixed error when comparing DateTime JValue with a DateTimeOffset JValue Fix - Fixed serializer sometimes not using DateParseHandling setting Fix - Fixed error in JsonWriter.WriteToken when writing a DateT...Readable Passphrase Generator: KeePass Plugin 0.7.2: Changes: Tested against KeePass 2.20.1 Tested under Ubuntu 12.10 (and KeePass 2.20) Added GenerateAsUtf8 method returning the encrypted passphrase as a UTF8 byte array.VidCoder: 1.4.2 Beta: Added Modulus dropdown to Loose anamorphic choice. Fixed a problem where the incorrect scaling would be chosen and pick the wrong aspect ratio. Fixed issue where old window objects would stick around and continue to respond to property change events We now clear locked width/height values when switching to loose or strict anamorphic. Fixed problems with Custom Anamorphic and display width specification. Fixed text in number box incorrectly being shown in gray in some circumstances.patterns & practices: Prism: Prism for .NET 4.5: This is a release does not include any functionality changes over Prism 4.1 Desktop. These assemblies target .NET 4.5. These assemblies also were compiled against updated dependencies: Unity 3.0 and Common Service Locator (Portable Class Library).Configuration Manager 2012 Automation: Beta Code (v0.1): Beta codeWinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.2: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...Snoop, the WPF Spy Utility: Snoop 2.8.0: Snoop 2.8.0Announcing Snoop 2.8.0! It's been exactly six months since the last release, and this one has a bunch of goodies in it. In particular, there is now a PowerShell scripting tab, compliments of Bailey Ling. With this tab, the possibilities are limitless. It basically lets you automate/script the application that you are Snooping. Bailey has a couple blog posts (one and two) on his tab already, and I am sure more is to come. Please note that if you do not have PowerShell installed, y....NET Micro Framework: .NET MF 4.3 (Beta): This is the 4.3 Beta version of the .NET Micro Framework. Feature List for v4.3 Support for Visual Studio 2012 (including the Windows Desktop Express version) All v4.2 QFEs features and bug fixes (PWM enhancements, lwIP and network driver reliability improvements, Analog Output, WinUSB and latest GCC support) Improved diagnostic information for deployment Decreased boot time Bug fixes Work Item 1736 - Create link for MFDeploy under start menu Work Item 1504 - Customizing lwIP o...MCEBuddy 2.x: MCEBuddy 2.3.1: 2.3.1All new Remote Client Server architecture. Reccomended Download. The Remote Client Installation is OPTIONAL, you can extract the files from the zip archive into a local folder and run MCEBuddy.GUI directly. 2.2.15 was the last standalone release. Changelog for 2.3.1 (32bit and 64bit) 1. All remote MCEBuddy Client Server architecture (GUI runs remotely/independently from engine now) 2. Fixed bug in Audio Offset 3. Added support for remote MediaInfo (right click on file in queue to get ...D3 Loot Tracker: 1.5: Support for session upload to website. Support for theme change through general settings. Time played counter will now also display a count for days. Tome of secrets are no longer logged as items.NTCPMSG: V1.2.0.0: Allocate an identify cableid for each single connection cable. * Server can asend to specified cableid directly.Team Foundation Server Word Add-in: Version 1.0.12.0622: Welcome to the Visual Studio Team Foundation Server Word Add-in Supported Environments Microsoft Office Word 2007 and 2010 X86 (32-bit) Team Foundation Server 2010 Object Model TFS 2010, 2012 and TFS Service supported, using TFS OM / Explorer 2010. Quality-Bar Details Tool has been reviewed by Visual Studio ALM Rangers Tool has been through an independent technical and quality review All critical bugs have been resolved Known Issues / Bugs WI#43553 - The Acceptance criteria is not pu...RMDdownloader: Test Release: RMDdownloader is a tiny application designed to locate and download the the desktops submitted by the http://ratemydesktop.org userbase. It providers a search string function and other options. RMDdownloader also allows you to automatically set the downloaded images as desktop wallpapers and adjust the windows aero theme accordingly. Upcoming features - The ability to upload your current desktop screenshot on http://ratemydesktop.org - Detection of skins/themes used in user submitted deskt...Viva Music Player: Viva Music Player v0.6.7: Initial release.Korean String Extension for .NET: ?? ??? ??? ????(v0.2.3.0): ? ?? ?? ?? ???? - string.KExtract() ?? ???? - string.AppendJosa(...) AppendJosa(...)? ?? ???? KAppendJosa(...)? ??? ?????UMD????? - PC?: UMDEditor?????V2.7: ??:http://jianyun.org/archives/948.html =============================================================================== UMD??? ???? =============================================================================== 2.7.0 (2012-10-3) ???????“UMD???.exe”??“UMDEditor.exe” ?????????;????????,??????。??????,????! ??64????,??????????????bug ?????????????,???? ???????????????? ???????????????,??????????bug ------------------------------------------------------- ?? reg.bat ????????????。 ????,??????txt/u...Untangler: Untangler 1.0.0: Add a missing file from first releaseDirectX Tool Kit: October 2012: October 2, 2012 Added ScreenGrab module Added CreateGeoSphere for drawing a geodesic sphere Put DDSTextureLoader and WICTextureLoader into the DirectX C++ namespace Renamed project files for better naming consistency Updated WICTextureLoader for Windows 8 96bpp floating-point formats Win32 desktop projects updated to use Windows Vista (0x0600) rather than Windows 7 (0x0601) APIs Tweaked SpriteBatch.cpp to workaround ARM NEON compiler codegen bugCRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1002.3): Visual Ribbon Editor 1.3.1002.3 What's New: Multi-language support for Labels/Tooltips for custom buttons and groups Support for base language other than English (1033) Connect dialog will not require organization name for ADFS / IFD connections Automatic creation of missing labels for all provisioned languages Minor connection issues fixed Notes: Before saving the ribbon to CRM server, editor will check Ribbon XML for any missing <Title> elements inside existing <LocLabel> elements...SubExtractor: Release 1029: Feature: Added option to make i and ¡ characters movie-specific for improved OCR on Spanish subs (Special Characters tab in Options) Feature: Allow switch to Word Spacing dialog directly from Spell Check dialog Fix: Added more default word spacings for accented characters Fix: Changed Word Spacing dialog to show all OCR'd characters in current sub Fix: Removed application focus grab during OCR Fix: Tightened HD subs fuzzy logic to reduce false matches in small characters Fix: Improved Arrow k...New ProjectsAptech.eProject.Batch59B - Online Bus Ticket Reseveration System: This is an eProject of SOFTECH - APTECHAptech.eProject.Batch59B - Online Floral Delivery: This is an ePorject of SOFTECH - APTECHDeploy File Generator: Deploy File Generator demonstrates an automated method for importing files into a Visual Studio project in such a way that they can be easily deployed.DNX - Dot Net eXtensions: Collections of extensions to add functionalities at the .NET Framework.EFMock: Database in-memory simulator around Entity Framework for unit test purposeEnergy Communications Solution: A networked grid, with advanced analytics, that consolidates data into an intelligent, instrumented and interconnected single platform for actionable insight.Essential Code: PL: Niezbedny kod EN: Essential CodeExtended WPF File Previewer Control: A WPF user control that implements extended file previewing. The project includes source for the control as well as for a "demo" project.IndieDateTime: IndieDateTime is a simple and easy to use wrapper around .NetFramework DateTime class that has it's own timer which is interdependent from user system. Being inJDynamic: JDynamic : a tools transfer json to .NET Dynamic OjbectKineticJS Type interface for TypeScript: This project provides a type inteface for the http://www.kineticjs.com/ library: kinetic.d.ts. OleExcel: This is to learn OLE for ExcelPortable IoC: Portable IOC is a tiny thread-safe Inversion of Control container that is portable between Windows Phone, Windows Store (Windows 8), Silverlight, and .NET apps.SpeedPOS: Solucion rapida y sencilla para PyMES que necesitan implementar puntos de venta.UnknownApplication: TESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTTESTUrl 2 Embed library: Url 2 Embed library, It's a library to convert URLs pages into embeddable content (Videos).WFLite: ??Asp.net WebPages 2?????????? 。

    Read the article

  • Exchange 2010 Deployment Notes - ISA 2004 Server Issue

    - by BWCA
    An interesting ISA 2004 tidbit … While we were setting up our Exchange 2010 ActiveSync environment, we encountered a problem where we could not successfully telnet over port 443 from one of our ISA 2004 Servers to our Exchange 2010 Client Access Server Array. When we tried to telnet over port 443 from the ISA Server to the Client Access Server Array name, we would get a “Could not open connection to the host on port 443: Connect failed” error message. Also, when we used portqry over port 443 from the ISA Server to the Client Access Server Array name, we would get a “Error opening socket: 10065” and “No route to host” error messages. It was odd because we did not have any problems with using ping or tracert from the ISA Server to the Client Access Server Array and our firewall firewall policy was allowing 443 traffic to pass through. After some troubleshooting, we were able to telnet and use portqry over port 443 successfully if we stopped the Microsoft Firewall service on the ISA 2004 Server.  So, it was strictly a problem with ISA.  Eventually, we were able to isolate the problem to a ISA 2004 Server System Policy setting as shown below (to modify the System Policy, right-click Firewall Policy and click Edit System Policy). Under the Diagnostics Services – HTTP Connectivity verifiers Configuration Group, you need to enable the configuration group under the General tab to resolve the problem.  After we enabled the setting, we no longer had a problem.

    Read the article

  • Radeon HD 6850 VMware 3D Support?

    - by Matt
    I'm a new Ubuntu user (new to all of linux actually). I've installed Ubuntu 11.10 x64 and have been enjoying it, but I wanted to see how it would perform using VMware for small time gaming since I find dual booting too much of a nuisance to even bother using Ubuntu at all (sorry!). I have an Asus EAH6850 DirectCU Radeon HD 6850 graphics card and I've installed the additional ATI/AMD proprietary FGLRX graphics driver, but when I open a Windows XP 32bit machine I installed through VMware, I get this message: "The GPU driver currently installed on this host may cause issues with VMware products. If you notice any issues please disable the 3D support in the affected virtual machines." I still have 3D capabilities in the VM but they are very very choppy even running the DX tests (the spinning cube). I've seen people on youtube and other forums saying that since the new 3D acceleration in VMware 8 gaming is very possible through VMs (and I've seen them running the DX tests with the spinning cube very smoothly). I'm wondering if my graphics card isn't fully supported or if I have installed it wrong. Also when I check system info (on the host Ubuntu machine) it says "Graphics VESA:BARTS" Should my Radeon HD 6850 be showing up there? The rest of my basic system info i5 2500k 8GB 1600MHz memory Guest is running with access to all 4 cores of processor and 3gb memory assigned.

    Read the article

  • RDA and Fusion Middleware Diagnostic Framework Integration

    - by Daniel Mortimer
    Further to my last blog entry "FMw Diagnostic Framework : Automatic Capture of Diagnostic Data Upon First Failure!" I have spent some time exploring how Remote Diagnostic Agent (RDA) integrates with Diagnostic Framework. Remote Diagnostic Agent, by default, collects the information about the last 10 incidents which have been captured in the Automatic Diagnostic Repository (ADR). This information can be located via RDA's Start Page Menu system. See screenshot below. Screenshot - Viewing Diagnostic Framework Incident Information in a RDA Package Note: In the next release of RDA - version 4.30 - the Diagnostic Repository menu label will have it's own position in the weblogic managed server sub menu hierarchy rather than be a child menu item of the logs menuDiagnostic Framework is also capable of launching RDA engine and including the output in an incident package. This is achieved via the command "IPS GENERATE PACKAGE". The RDA output is written to DOMAIN_HOME/servers/<server name>/adr/diag/ofm/<domain name>/<server name>/incpkg/pkg_[number]/seq_[number]/rda The RDA collected files are best viewed (as shown in the screenshot above) by opening the RDA Start Page - "DFW__start.htm" - from this directory in a browser. If you do not have a browser available on the host machine, zip the contents of the rda directory and transfer and extract to a machine which has a browser.  The explanation of the integration goes a little deeper. If you want to know more, read My Oracle Support document: Understanding RDA and FMW 11g Diagnostic Framework Integration [Document 1503644.1]

    Read the article

  • CodePlex Daily Summary for Monday, October 08, 2012

    CodePlex Daily Summary for Monday, October 08, 2012Popular ReleasesSofire Suite v1.6: XSqlModelGenerator.AddIn: 1、?? VS2010/2012 2、?? .NET FRAMEWORK 2.0 3、?? SOFIRE V1.6Sofire XSql: XSqlFormDemo: ???? MSSQL ???????ClosedXML - The easy way to OpenXML: ClosedXML 0.68.0: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Picturethrill: Version 2.10.7.0: Major FeaturesWindows 8 Support!!! Picturethrill is fully tested on latest Windows 8. Try it now.New AboutPicturethrill Dialog Available from "Advanced" window. Describes Version, Developers and other infoFull Installation Information in Control Panel Picturethrill in ControlPanel has full information, including Version and Size. Minor Bug FixesImproved Logging AppDomain Unhandled Exception Logging Delete WallpaperDownload Folder (Saves Diskspace) Advanced Settings "Close" button bug ...VidCoder: 1.4.3 Beta: Fixed crash on switching container types. Updated subtitle selection to only allow one PGS subtitle to be selected under an MP4 container as PGS passthrough in MP4 is not supported and the sub must be burned in.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.68: Fixes for issues: 17110 - added support for -moz-calc or -webkit-calc to previous fix for calc support. 18652 - if being run under Mono runtime, don't mistake UNIX-style paths for command-line switches. 18659 - added capability to specify JS settings for CSS files that have JS embedded in expressions. Did a lot of internal house-keeping: add DLL support for -pponly switch. Add support for -js:expr, -js:evt, and -js:json to allow easy parsing for expressions, event handlers, and JSON code...Json.NET: Json.NET 4.5 Release 10: New feature - Added Portable build to NuGet package New feature - Added GetValue and TryGetValue with StringComparison to JObject Change - Improved duplicate object reference id error message Fix - Fixed error when comparing empty JObjects Fix - Fixed SecAnnotate warnings Fix - Fixed error when comparing DateTime JValue with a DateTimeOffset JValue Fix - Fixed serializer sometimes not using DateParseHandling setting Fix - Fixed error in JsonWriter.WriteToken when writing a DateT...Readable Passphrase Generator: KeePass Plugin 0.7.2: Changes: Tested against KeePass 2.20.1 Tested under Ubuntu 12.10 (and KeePass 2.20) Added GenerateAsUtf8 method returning the encrypted passphrase as a UTF8 byte array.JSLint for Visual Studio 2010: 1.4.2: 1.4.2GPdotNET - artificial intelligence tool: GPdotNET v2 BETA3: This is hopefully the last beta before final version.RiP-Ripper & PG-Ripper: PG-Ripper 1.4.02: changes NEW: Added Support Big Naturals Only forum NEW: Added Setting to enable/disable "Show last download image"patterns & practices: Prism: Prism for .NET 4.5: This is a release does not include any functionality changes over Prism 4.1 Desktop. These assemblies target .NET 4.5. These assemblies also were compiled against updated dependencies: Unity 3.0 and Common Service Locator (Portable Class Library).WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.2: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...Snoop, the WPF Spy Utility: Snoop 2.8.0: Snoop 2.8.0Announcing Snoop 2.8.0! It's been exactly six months since the last release, and this one has a bunch of goodies in it. In particular, there is now a PowerShell scripting tab, compliments of Bailey Ling. With this tab, the possibilities are limitless. It basically lets you automate/script the application that you are Snooping. Bailey has a couple blog posts (one and two) on his tab already, and I am sure more is to come. Please note that if you do not have PowerShell installed, y....NET Micro Framework: .NET MF 4.3 (Beta): This is the 4.3 Beta version of the .NET Micro Framework. Feature List for v4.3 Support for Visual Studio 2012 (including the Windows Desktop Express version) All v4.2 QFEs features and bug fixes (PWM enhancements, lwIP and network driver reliability improvements, Analog Output, WinUSB and latest GCC support) Improved diagnostic information for deployment Decreased boot time Bug fixes Work Item 1736 - Create link for MFDeploy under start menu Work Item 1504 - Customizing lwIP o...MCEBuddy 2.x: MCEBuddy 2.3.1: 2.3.1All new Remote Client Server architecture. Reccomended Download. The Remote Client Installation is OPTIONAL, you can extract the files from the zip archive into a local folder and run MCEBuddy.GUI directly. 2.2.15 was the last standalone release. Changelog for 2.3.1 (32bit and 64bit) 1. All remote MCEBuddy Client Server architecture (GUI runs remotely/independently from engine now) 2. Fixed bug in Audio Offset 3. Added support for remote MediaInfo (right click on file in queue to get ...D3 Loot Tracker: 1.5: Support for session upload to website. Support for theme change through general settings. Time played counter will now also display a count for days. Tome of secrets are no longer logged as items.Team Foundation Server Word Add-in: Version 1.0.12.0622: Welcome to the Visual Studio Team Foundation Server Word Add-in Supported Environments Microsoft Office Word 2007 and 2010 X86 (32-bit) Team Foundation Server 2010 Object Model TFS 2010, 2012 and TFS Service supported, using TFS OM / Explorer 2010. Quality-Bar Details Tool has been reviewed by Visual Studio ALM Rangers Tool has been through an independent technical and quality review All critical bugs have been resolved Known Issues / Bugs WI#43553 - The Acceptance criteria is not pu...DirectX Tool Kit: October 2012: October 2, 2012 Added ScreenGrab module Added CreateGeoSphere for drawing a geodesic sphere Put DDSTextureLoader and WICTextureLoader into the DirectX C++ namespace Renamed project files for better naming consistency Updated WICTextureLoader for Windows 8 96bpp floating-point formats Win32 desktop projects updated to use Windows Vista (0x0600) rather than Windows 7 (0x0601) APIs Tweaked SpriteBatch.cpp to workaround ARM NEON compiler codegen bugCRM 2011 Visual Ribbon Editor: Visual Ribbon Editor (1.3.1002.3): Visual Ribbon Editor 1.3.1002.3 What's New: Multi-language support for Labels/Tooltips for custom buttons and groups Support for base language other than English (1033) Connect dialog will not require organization name for ADFS / IFD connections Automatic creation of missing labels for all provisioned languages Minor connection issues fixed Notes: Before saving the ribbon to CRM server, editor will check Ribbon XML for any missing <Title> elements inside existing <LocLabel> elements...New Projectsamplifi: This project is still under construction. We will add more information here as soon as it is available.autoclubpigue: Proyecto para el auto club de piguecoiffeurprj: coiffeurprjerutufym: erutufym is gnol eht gge.Express AOP: A .NET AOP ToolsFile Slurpee: The purpouse of this application is to help security professionals during their penetration tests. Given a configuration this application will scour the target Guardian - Google Authenticator: Guardian is a windows client application for Google Authenticator - a software based two-factor authentication token developed by Google.ManagedCuda Galaxy Simulator: This project is a test of ManagedCuda and graphics interop to OpenTK to simulate a simple galaxy on the GPU.mostafanote: ????? ???? ??????? ?? ???? ?? ?? ?? ? ?? ??????? ?? ??????? ??? ?? ??? ?? ?? ???????? ??????? ??? ??? ?? ???? ?????? NXT Controller: A simple controller for the LEGO Mindstorms NXTPowerShell Security: PoshSec is short for PowerShell security, a module provided to allow PowerShell users testing, analysis and reporting on Window securityRevenant Raiders - Sunstrider: Tool to provide information about Revenant Raiders - Sunstrider.Run: animal runSharedDeploy: Simple ASP.MVC app , that use 2 types of view : mobile and desktop. In core WebApi, jQuery, jQuery.mobileSkyCoffee: Cafeteria ApplicationSOSA Analysis Module: Analysis program for data from SOSA psychological experiment software.SQL Connector: SQL Connector is a .DLL file that make it easy to comunicate with SQL Server Works in : Windows Desktop Applications ASP.Net Web (MVC - WEB Services) Windows cSQL Job Scripter: SQL Job Scripter is a command line utility that produces scripts of SQL Agent jobs. It will script either to a single file or to one file per job. SQL Server Watcher: A tool for collecting and monitoring information about sql server.Team Build Inspector: An add-in for Visual Studio Team Explorer that monitors the status of build definitions by its latest build, latest good build & underlying source code status.TED Talk Download Manager: "TED Talk Download Manager" provides a central point in which to download multiple TED talks, while keeping track of any talk previously downloaded.Temp project mycollection: My collection temporary projectUnreal Unit Converter: A Simple UDK <-> 3DS Max <-> Meters Unit Converter - with some other stuff.Watermelon Site: This Site is The site of Watermelon Inc. In This Site: Downloads News about Watermelon And more... WiX Extended Bootstrapper Application: An extended WiX bootstrapper Application based on the WiX standard bootstrapper application.Wrox NHibernate with ASP.NET Problem-Design-Solution -C# version: sample code of Wrox NHibernate with ASP.NET Problem-Design-Solution (http://nhibernateasp.codeplex.com/) in C# which is done as a practice

    Read the article

  • A Generic RIDC Test Program

    - by Kevin Smith
    Many times I have found it useful to use a java program that communicates with WebCenter Content (WCC) using RIDC for testing. I might not have access to the web GUI or need to test a service running as a specific user. In the past I had created a number of "one off" programs that submitted specific services, e.g GET_SEARCH_RESULTS, DOCINFO, etc. Recently I decided to create a generic RIDC test program that could submit any service with the desired parameters based on a configuration file. The programs gets the following information from the configuration file: WCC connection information (host, port) User to use to run service Service to run Any parameters for the service The program will make a connection to the WCC server, send the service request, and print the results of the service call using the getResponseAsString() method. Here is a sample configuration file: ridc.host=localhostridc.port=4444ridc.user=sysadminridc.idcservice=GET_SEARCH_RESULTSidcservice.QueryText=dDocType <matches> `Document`idcservice.SortField=dDocNameidcservice.SortDesc=ASC There is a readme file included in the zip with instructions for how to configure and run the program. The program takes one command line argument, the configuration file name. The configuration file name is optional and defaults to config.properties. If you have any suggestions for improvements let me know. Right now it only submits a single service call each time you run it. One enhancement I have already thought about would be to allow you to specify multiple services to tun in the configuration file. You can do that with the current program by having multiple configuration files and running the program multiple times, each with a different configuration file. You can download the program here.

    Read the article

  • double-click does not open the default program

    - by Chang
    I installed Ubuntu 12.04, with texlive-full and texworks. When I double-click a .tex file in Nautilus, it pops up a Do you want to run "xxxxxxxx.tex", or display it contents? "xxxxxxxx.tex" is an executable text file. Run in Terminal Display Cancel Run If I choose Display, it opens texworks. How can I make it open without seeing the above conversation window? By the way, is .tex file indeed an executable file? ADDED Just for the case, my ~/.local/share/applications/mimeapps.list file looks like the following: [Default Applications] text/html=google-chrome.desktop x-scheme-handler/http=google-chrome.desktop x-scheme-handler/https=google-chrome.desktop x-scheme-handler/about=google-chrome.desktop x-scheme-handler/unknown=google-chrome.desktop text/x-tex=texworks.desktop x-scheme-handler/mailto=google-chrome.desktop [Added Associations] text/x-tex=texworks.desktop; text/x-bibtex=jabref.desktop;gedit.desktop; I observe texworks are both up and down. Should I remove one? ADDED This does not happen with all .tex files. In fact, I am currently using Ubuntu 12.04 under Virtual Box with Windows 7 host. I have my Dropbox account synced with the Windows 7 host, and I access files in Dropbox in Ubuntu through Virtual Box's shared folder functionality. (I didn't install Dropbox client in Ubuntu.) Files in Dropbox are owned by root with group vboxsf. My personal account is in the group vboxsf. It seems that I have to uncheck the option for "executable", but I have all my .tex files in the Dropbox shared folder. Would there be any workaround?

    Read the article

  • HTTP Protocal

    I have worked with the HTTP protocal for about ten years now and I have found it to be incredibly usefull for transfering data espicaly for remote systems and regardless of the network enviroment. Prior to the existance of web services, developers use to use HTTP to screen scrap data off of web pages in order to interact with remote systems, and then process the data as they needed. I use to use the HTTPWebRequest and HTTPWebRespones classes in order to screen scrap data from various sites that had information I needed to use if no web service was avalible. This allowed me to call just about any webpage and grab all of the content on the page. Below is piece of a web spider that I build about 5-7 years ago. The spider uses the HTTP protocal to requst webpages and then parse the data that is returned.  At the time of writing the spider I wanted to create a searchable index of sites I frequented. // C# 2.0 Framework// Creating a request for a specfic webpageHttpWebRequest webreq = (HttpWebRequest)WebRequest.Create(_Url); // Storeing the response of the webrequestwebresp = (HttpWebResponse)webreq.GetResponse(); StreamReader loResponseStream = new StreamReader(webresp.GetResponseStream()); _Content = loResponseStream.ReadToEnd(); // Adjust the Encoding of Responsestring charset = "";EncodeString(ref _Content, ref charset);loResponseStream.Close(); //Parse Data from the Respone_Content = _Content.Replace("\n", "");_Head = GetTagByName("Head", _Content);_Title = GetTagByName("title", _Content);_Body = GetTagByName("body", _Content);

    Read the article

  • Precautions during SSH

    - by Shagun
    I recently had to give away my Ubuntu 12.10 root password to one of my friends so that he could SSH into my system and send some files to me. Now he is my friend and I trust him so I was not reluctant in sharing my password. And I did change it afterwards. But it just struck me how can I view all the commands that were executed by some other user remote logging into my system (obviously not my friend. I mean in general).To what extent can they access my data (especially my passwords eg I use Last Pass so can they access my account passwords as well??) And if they open any browser after logging into my system do they have access to all my passwords provided I have saved them using the "remember password" option given by chrome Also what precautions I should take when I am allowing some one to remote login in my system and how can I track the various commands used by them or the changes they made in my system. Also is there some simple way to get notified whenever some one logs into my system apart from checking the /var/log/auth.log file??

    Read the article

  • Oracle Solaris Zones Physical to virtual (P2V)

    - by user939057
    IntroductionThis document describes the process of creating and installing a Solaris 10 image build from physical system and migrate it into a virtualized operating system environment using the Oracle Solaris 10 Zones Physical-to-Virtual (P2V) capability.Using an example and various scenarios, this paper describes how to take advantage of theOracle Solaris 10 Zones Physical-to-Virtual (P2V) capability with other Oracle Solaris features to optimize performance using the Solaris 10 resource management advanced storage management using Solaris ZFS plus improving operating system visibility with Solaris DTrace. The most common use for this tool is when performing consolidation of existing systems onto virtualization enabled platforms, in addition to that we can use the Physical-to-Virtual (P2V) capability  for other tasks for example backup your physical system and move them into virtualized operating system environment hosted on the Disaster Recovery (DR) site another option can be building an Oracle Solaris 10 image repository with various configuration and a different software packages in order to reduce provisioning time.Oracle Solaris ZonesOracle Solaris Zones is a virtualization and partitioning technology supported on Oracle Sun servers powered by SPARC and Intel processors.This technology provides an isolated and secure environment for running applications. A zone is a virtualized operating system environment created within a single instance of the Solaris 10 Operating System.Each virtual system is called a zone and runs a unique and distinct copy of the Solaris 10 operating system.Oracle Solaris Zones Physical-to-Virtual (P2V)A new feature for Solaris 10 9/10.This feature provides the ability to build a Solaris 10 images from physical system and migrate it into a virtualized operating system environmentThere are three main steps using this tool1. Image creation on the source system, this image includes the operating system and optionally the software in which we want to include within the image. 2. Preparing the target system by configuring a new zone that will host the new image.3. Image installation on the target system using the image we created on step 1. The host, where the image is built, is referred to as the source system and the host, where theimage is installed, is referred to as the target system. Benefits of Oracle Solaris Zones Physical-to-Virtual (P2V)Here are some benefits of this new feature:  Simple- easy build process using Oracle Solaris 10 built-in commands.  Robust- based on Oracle Solaris Zones a robust and well known virtualization technology.  Flexible- support migration between V series servers into T or -M-series systems.For the latest server information, refer to the Sun Servers web page. PrerequisitesThe target Oracle Solaris system should be running the latest version of the patching patch cluster. and the minimum Solaris version on the target system should be Solaris 10 9/10.Refer to the latest Administration Guide for Oracle Solaris for a complete procedure on how todownload and install Oracle Solaris. NOTE: If the source system that used to build the image is an older version then the targetsystem, then during the process, the operating system will be upgraded to Solaris 10 9/10(update on attach).Creating the Image Used to distribute the software.We will create an image on the source machine. We can create the image on the local file system and then transfer it to the target machine, or build it into a NFS shared storage andmount the NFS file system from the target machine.Optional  before creating the image we need to complete the software installation that we want to include with the Solaris 10 image.An image is created by using the flarcreate command:Source # flarcreate -S -n s10-system -L cpio /var/tmp/solaris_10_up9.flarThe command does the following:  -S specifies that we skip the disk space check and do not write archive size data to the archive (faster).  -n specifies the image name.  -L specifies the archive format (i.e cpio). Optionally, we can add descriptions to the archive identification section, which can help to identify the archive later.Source # flarcreate -S -n s10-system -e "Oracle Solaris with Oracle DB10.2.0.4" -a "oracle" -L cpio /var/tmp/solaris_10_up9.flarYou can see example of the archive identification section in Appendix A: archive identification section.We can compress the flar image using the gzip command or adding the -c option to the flarcreate commandSource # gzip /var/tmp/solaris_10_up9.flarAn md5 checksum can be created for the image in order to ensure no data tamperingSource # digest -v -a md5 /var/tmp/solaris_10_up9.flar Moving the image into the target system.If we created the image on the local file system, we need to transfer the flar archive from the source machine to the target machine.Source # scp /var/tmp/solaris_10_up9.flar target:/var/tmpConfiguring the Zone on the target systemAfter copying the software to the target machine, we need to configure a new zone in order to host the new image on that zone.To install the new zone on the target machine, first we need to configure the zone (for the full zone creation options see the following link: http://docs.oracle.com/cd/E18752_01/html/817-1592/index.html  )ZFS integrationA flash archive can be created on a system that is running a UFS or a ZFS root file system.NOTE: If you create a Solaris Flash archive of a Solaris 10 system that has a ZFS root, then bydefault, the flar will actually be a ZFS send stream, which can be used to recreate the root pool.This image cannot be used to install a zone. You must create the flar with an explicit cpio or paxarchive when the system has a ZFS root.Use the flarcreate command with the -L archiver option, specifying cpio or pax as themethod to archive the files. (For example, see Step 1 in the previous section).Optionally, on the target system you can create the zone root folder on a ZFS file system inorder to benefit from the ZFS features (clones, snapshots, etc...).Target # zpool create zones c2t2d0 Create the zone root folder:Target # chmod 700 /zones Target # zonecfg -z solaris10-up9-zonesolaris10-up9-zone: No such zone configuredUse 'create' to begin configuring a new zone.zonecfg:solaris10-up9-zone> createzonecfg:solaris10-up9-zone> set zonepath=/zoneszonecfg:solaris10-up9-zone> set autoboot=truezonecfg:solaris10-up9-zone> add netzonecfg:solaris10-up9-zone:net> set address=192.168.0.1zonecfg:solaris10-up9-zone:net> set physical=nxge0zonecfg:solaris10-up9-zone:net> endzonecfg:solaris10-up9-zone> verifyzonecfg:solaris10-up9-zone> commitzonecfg:solaris10-up9-zone> exit Installing the Zone on the target system using the imageInstall the configured zone solaris10-up9-zone by using the zoneadm command with the install -a option and the path to the archive.The following example shows how to create an Image and sys-unconfig the zone.Target # zoneadm -z solaris10-up9-zone install -u -a/var/tmp/solaris_10_up9.flarLog File: /var/tmp/solaris10-up9-zone.install_log.AJaGveInstalling: This may take several minutes...The following example shows how we can preserve system identity.Target # zoneadm -z solaris10-up9-zone install -p -a /var/tmp/solaris_10_up9.flar Resource management Some applications are sensitive to the number of CPUs on the target Zone. You need tomatch the number of CPUs on the Zone using the zonecfg command:zonecfg:solaris10-up9-zone>add dedicated-cpuzonecfg:solaris10-up9-zone> set ncpus=16DTrace integrationSome applications might need to be analyzing using DTrace on the target zone, you canadd DTrace support on the zone using the zonecfg command:zonecfg:solaris10-up9-zone>setlimitpriv="default,dtrace_proc,dtrace_user" Exclusive IP stack An Oracle Solaris Container running in Oracle Solaris 10 can have a shared IP stack with the global zone, or it can have an exclusive IP stack (which was released in Oracle Solaris 10 8/07). An exclusive IP stack provides a complete, tunable, manageable and independent networking stack to each zone. A zone with an exclusive IP stack can configure Scalable TCP (STCP), IP routing, IP multipathing, or IPsec. For an example of how to configure an Oracle Solaris zone with an exclusive IP stack, see the following example zonecfg:solaris10-up9-zone set ip-type=exclusivezonecfg:solaris10-up9-zone> add netzonecfg:solaris10-up9-zone> set physical=nxge0 When the installation completes, use the zoneadm list -i -v options to list the installedzones and verify the status.Target # zoneadm list -i -vSee that the new Zone status is installedID NAME STATUS PATH BRAND IP0 global running / native shared- solaris10-up9-zone installed /zones native sharedNow boot the ZoneTarget # zoneadm -z solaris10-up9-zone bootWe need to login into the Zone order to complete the zone set up or insert a sysidcfg file beforebooting the zone for the first time see example for sysidcfg file in Appendix B: sysidcfg filesectionTarget # zlogin -C solaris10-up9-zoneTroubleshootingIf an installation fails, review the log file. On success, the log file is in /var/log inside the zone. Onfailure, the log file is in /var/tmp in the global zone.If a zone installation is interrupted or fails, the zone is left in the incomplete state. Use uninstall -F to reset the zone to the configured state.Target # zoneadm -z solaris10-up9-zone uninstall -FTarget # zonecfg -z solaris10-up9-zone delete -FConclusionOracle Solaris Zones P2V tool provides the flexibility to build pre-configuredimages with different software configuration for faster deployment and server consolidation.In this document, I demonstrated how to build and install images and to integrate the images with other Oracle Solaris features like ZFS and DTrace.Appendix A: archive identification sectionWe can use the head -n 20 /var/tmp/solaris_10_up9.flar command in order to access theidentification section that contains the detailed description.Target # head -n 20 /var/tmp/solaris_10_up9.flarFlAsH-aRcHiVe-2.0section_begin=identificationarchive_id=e4469ee97c3f30699d608b20a36011befiles_archived_method=cpiocreation_date=20100901160827creation_master=mdet5140-1content_name=s10-systemcreation_node=mdet5140-1creation_hardware_class=sun4vcreation_platform=SUNW,T5140creation_processor=sparccreation_release=5.10creation_os_name=SunOScreation_os_version=Generic_142909-16files_compressed_method=nonecontent_architectures=sun4vtype=FULLsection_end=identificationsection_begin=predeploymentbegin 755 predeployment.cpio.ZAppendix B: sysidcfg file sectionTarget # cat sysidcfgsystem_locale=Ctimezone=US/Pacificterminal=xtermssecurity_policy=NONEroot_password=HsABA7Dt/0sXXtimeserver=localhostname_service=NONEnetwork_interface=primary {hostname= solaris10-up9-zonenetmask=255.255.255.0protocol_ipv6=nodefault_route=192.168.0.1}name_service=NONEnfs4_domain=dynamicWe need to copy this file before booting the zoneTarget # cp sysidcfg /zones/solaris10-up9-zone/root/etc/

    Read the article

  • Cleaning your BizTalk Build Server

    - by Michael Stephenson
    Just a little note for myself this one.At one of my customers where it is still BizTalk 2006 one of the build servers is intermittently getting issues so I wanted to run a script periodically to clean things up a little.  The below script is an example of how you can stop cruise control and all of the biztalk services, then clean the biztalk databases and reset the backup process and then click everything off again.This should keep the server a little cleaner and reduce the number of builds that occasionally fail for adhoc environmental issues.REM Server Clean ScriptREM =================== REM This script is ran to move the build server back to a clean state echo Stop Cruise Controlnet stop CCService echo Stop IISiisreset /stop echo Stop BizTalk Servicesnet stop BTSSvc$<Name of BizTalk Host><Repeat for other BizTalk services> echo Stop SSOnet stop ENTSSO echo Stop SQL Job Agentnet stop SQLSERVERAGENT echo Clean Message Boxsqlcmd -E -d BizTalkMsgBoxDB -Q "Exec bts_CleanupMsgbox"sqlcmd -E -d BizTalkMsgBoxDB -Q "Exec bts_PurgeSubscriptions"  echo Clean Tracking Databasesqlcmd -E -d BizTalkDTADb -Q "Exec dtasp_CleanHMData" echo Reset TDDS Stream Statussqlcmd -E -d BizTalkDTADb -Q "Update TDDS_StreamStatus Set lastSeqNum = 0" echo Force Full Backupsqlcmd -E -d BizTalkMgmtDB -Q "Exec sp_ForceFullBackup" echo Clean Backup Directorydel E:\BtsBackups\*.* /q  echo Start SSOnet start ENTSSO echo Start SQL Job Agentnet start SQLSERVERAGENT echo Start BizTalk Servicesnet start BTSSvc$<Name of BizTalk Host><Repeat for other BizTalk services> echo Start IISiisreset /start echo Start Cruise Controlnet start CCService

    Read the article

  • Bazaar - pull the last revision only (and not the whole branch)

    - by Sandman4
    Shortly: How can I take the latest revision (only) from a remote bazaar repository and add it as a new revision to a local repository. Background: I have a development system and a production system. On a development system there's a bazaar repository having branch with lots of development revisions. Once in a while I want to incorporate the latest developments into production system. I want to do so by some sort of "pulling" (development system can not connect to production for security reasons, but production can initiate connection to development). On the production, I don't want the whole development revision history, only those revisions which actually go into production (normally it's the branch tip). Yet I want version control on the production system to keep track of what actually goes into production each time. bzr pull pulls the whole branch. bzr pull --revision=last:1 also pulls the whole branch, up to the specified revision. bzr merge --pull --revision=last:1 also pulls the whole branch. bzr merge --pull --revision=last:2..last:1 and bzr merge --pull --change=last:1 both pull only the new changes introduced in the latest revision, but not changes introduced in the older revisions. With lightweight checkout I have no track of revisions which are pulled into production - local working tree remains part of the remote repository The only way I see so far is importing the working tree using some rsync or scp and committing them to a local branch afterwards. Any better ideas ?

    Read the article

  • Wireless drops on HP ENVY dv6 with RT3290 wireless, worked without problem prior to upgrading to Ubuntu 13.10, can it be fixed?

    - by Tim
    I have a HP ENVY dv6 Notebook PC with an AMD A10 quad core and RT3290 wireless. Since I upgraded from Ubuntu 13.04 to 13.10, the wireless connects, but then drops after a few minutes or longer, whether or not I am running openconnect to get through a VPN. If I attempt to run a remote X client (e.g. remote xterm) it drops. If I don't run an X client, it disconnects after a while, requiring a reload of the driver and reconnect. Wireless info... sudo lshw -c network *-network description: Wireless interface product: RT3290 Wireless 802.11n 1T/1R PCIe vendor: Ralink corp. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 68:94:23:a7:09:cb width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.11.0-12-generic firmware=0.37 ip=192.168.1.115 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:55 memory:f0210000-f021ffff I have successfully built and installed the MediaTek driver with no luck on connecting, then the system hangs on reboot and I have to recover/undo the changes to boot successfully.

    Read the article

  • Ditch cPanel / WHM in favour of manual seup

    - by BWRic
    We currently use cPanel / WHM on a reseller account but are looking at getting a dedicated server. My first thought was to duplicate this set up on the dedicated box to allow us to quickly create new accounts. I'll be a managed server so they'll have set up the LAMP stack. I'm curious if I actually need cPanel and WHM. We don't use many of the features from cPanel / WHM, just creating accounts and databases, clients do not have FTP access. I'm no sys admin and come from a Windows / GUI background but have some knowledge in setting up development servers. WHM: Creating accounts I presume this sets up the Apache virtual host, FTP access and DNS settings. I've some knowledge of editing the Apache files to create virtual hosts. Am I correct in thinking as long as the DNS is pointing to the server IP and the virtual host is configured the server can serve the (php) pages? I'm not sure I need per site FTP access as only we will have access so I could have a server wide/htdocs only access to view all the site. The company who supply the dedicated hosts would also provide the own DNS management tool so I'm not need to cPanel one. MySQL: Creating users and databases We use cPanel to create the MySQL users and databases. As it's a dedicated box and I can have root access I think this could be replaced by SQLyog for db management and phpMyAdmin for user management. Do you I need cPanel or can I get by editing a few text files for creating the accounts, then use the MySQL tools for databases? Or am I missing something major with how the sites are configured?

    Read the article

  • Collabnet Subversion and Self Signed Certificates

    - by Robert May
    We installed Collabnet as our subversion server recently.  This is the first time that we’ve used it.  In general, it seems pretty good, but we ran into a problem with it.  People were getting the following error in Tortoise: OPTIONS of ’https://xxxx.xxxxxxxx.xxxx/svn/xxxxx’: SSL handshake failed: SSL error code – 1/1/336032856 (https://xxxx.xxxxxxxx.xxxx) The odd thing is that for some people, it worked, for others, it didn’t!  I also couldn’t find anything useful out on the internet. We had checked the Subversion Server should serve via https option in the settings, and all of the ports were open, etc. This option causes a self signed certificate to be used. What we discovered: Tortoise must use the same url as is in the Hostname field on the General settings for collabnet or you’ll get this error.  Basically, some people were using https://svn.xxxxxxx.xxxxx and others were using https://computername.xxxxxxxx.xxxx.  Because the host name said used the computer name version, the whole thing broke.  By changing the host name to the svn version, which is what they should be using, the problem went away.  The users do get the “Accept Certificate” prompt, but we can live with that! Technorati Tags: Subversion,Collabnet

    Read the article

< Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >