Search Results

Search found 14745 results on 590 pages for 'setting'.

Page 299/590 | < Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >

• Cisco 877 as PPPoA/PPPoE bridge (no routing) - how to make it listen to IP for management?

  - by Ingmar Hupp

  I have a Cisco 877 configured to bridge ADSL with PPPoA to PPPoE on Vlan1. This works fine, but in this mode the only way I can configure the Cisco is via the serial console. I'd like to have the Cisco also listen on an IP address so I can telnet/ssh into it. I think the right way to go about this would be via bridge irb, but I'm not sure exactly how (or if that's even the right direction). IOS is 12.4T and my current config (cut down to essentials) is: no ip routing no ip cef ! ! interface ATM0 no ip address no ip route-cache no atm ilmi-keepalive pvc 0/38 encapsulation aal5snap ! dsl operating-mode auto bridge-group 1 ! ! interface Vlan1 no ip address no ip route-cache bridge-group 1 Just setting an IP address on Vlan1 didn't have the desired effect, but surely this must be possible somehow (the Draytek Vigor 120 even does it by default).

  Read the article

• New Mac OS X Server setup, when i send mail to gmail it goes straight to Spam. Why is that?

  - by basilmir

  New Mac OS X Server setup, when i send mail to gmail it goes straight to Spam. Why is that? My setup: DNS - done (A records PTR are ok) Mail Setup - done Webmail - done Also there seems to be a naming problem. They all come from [email protected] instead of [email protected]. I must be missing an alias somewhere. I've read an entire book on setting this up so don't throw stones :) The GUI is masking a lot of this up for me, so explanations via GUI is appreciated.

  Read the article

• Quad Core host with hyper-threading, how many processors to configure in VirtualBox?

  - by Anthony

  I have a quad-core i7 processor with hyperthreading (8 logical cores), when I configured a virtual machine to use 8 processors, VirtualBox gave me a warning saying that I only have four cores (which is true) and that this may cause a performance issue. But hyper-threading is a hardware feature, so the OS sees 8 cores and it sends instructions to all 8. What if setting it to 4 caused the VM to use 2 cores (4 threads) instead of 4 simultaneous threads (on all 4 cores)? Does the warning I got take into account that my machine has hyper-threading?

  Read the article

• Setup secure shared hosting (Apache, PHP, MySQL)

  - by Apaz

  So I'm setting up a shared hosting with Apache, PHP, MySQL and the biggest question mark is how to do with PHP, since there is a million options out there how to configure it securely. The plan is: Chroot for MySQL (built in support for chroot) Chroot for Apache (mod_security) Each user executing their PHP-scripts as their own user (see below) Set open_basedir Disable all "evil" php-functions (allow_url_fopen, system, exec, and so on) Ive looked at suexec and suphp but they seems very slow; http://blog.stuartherbert.com/php/2007/12/18/using-suexec-to-secure-a-shared-server/ http://blog.stuartherbert.com/php/2008/01/18/using-suphp-to-secure-a-shared-server/ So I've looked some more and found some other solutions: apache2-mpm-itk + mod_php(?) mod_fcgid + php-fpm mod_fastcgi + php-fpm Ive tried a simple setup with mod_fastcgi + php-fpm and it seems to work, runs as correct user and so on, but the protection against directory traveling is still open_basedir(?) One solution for that could be to use php-fpm's chroot option, but that causes a lot of other issues like domain name resolver does not work sending mail does not work Tips?

  Read the article

• Jenkins Paramerized Trigger + Copy Artifact

  - by Josh Kelley

  I'm working on setting up Jenkins to handle our release builds. A release build consists of a Windows installer that includes some binaries that must be built on Linux. Here's what I have so far: The Windows portion and Linux portion are set up as separate Jenkins projects. The Windows project is parameterized, taking the Subversion tag to build and release. As part of its build, the Windows project triggers a build of that same Subversion tag for the Linux project (using the Parameterized Trigger plugin) then copies the artifacts from the Linux project (using the Copy Artifact plugin) to the Windows project's workspace so that they can be included in the Windows installer. Where I'm stuck: Right now, Copy Artifact is set up to copy the last successful build. It seems more robust to configure Copy Artifact to copy from the exact build that Parameterized Trigger triggered, but I'm having trouble figuring out how to make that work. There's an option for a "build selector" parameter that I think is intended to help with this, but I can't figure out how it's supposed to be set up (and blindly experimenting with different possibilities is somewhat painful when the build takes an hour or two to find success or failure). How should I set this up? How does build selector work?

  Read the article

• Port Forwarding on Actiontec GT704-WG Router Issues

  - by adamweeks

  I am trying to setup a server at customer's location that has the Actiontec GT704-WG DSL router. The port forwarding it not working at all. Here's the details: Server: OpenSuse Linux box with a static IP address of 192.168.1.200 Application running accepting connections on port 8060 Firewall disabled Local connections (within the network) working properly Router: Updated to latest firmware available DHCP range set to 192.168.1.69-192.168.1.199 to not have any conflicts with the server Firewall set to "off" Rule set in the "Applications" setting to forward 8060 TCP and UDP to 192.168.1.200 machine (I've tried using the "TCP,UDP" option as well as both individual options) I've also tried just simply putting the server in the DMZ to see if I could connect to anything, but still nothing. Looking for any clues before I call and waste hours explaining the issue to tech support.

  Read the article

• How to prevent dial up networking connection window from coming up on Windows 7?

  - by Tom

  I have PPP over Ethernet connection at home, so I have a dial up connection set up which comes up every time when I log in, so I can connect to the net by clicking on it. This works fine, but now I got a router which does the connection automatically, so there is no need for the dial up networking connecting window to come up. Nevertheless it comes up everytime when I log in regardless of the living net connection already established by the router. It does not cause any error I only have to cancel the dialog, but it's a nuisance and I can't find any setting to make it stop. Of course, I could remove the networking connection altogether, but I'd rather keep it, so I don't have to create it again if sometimes I need to connect to the net directly without the router. Is there a way to stop the connection dialog from coming up without removing the networking connection?

  Read the article

• Make SoX not show output

  - by Ram Rachum

  I'm recording with SoX, and I want to make it not show output at all. When recording, it shows this output: Input File : 'default' (waveaudio) Channels : 2 Sample Rate : 48000 Precision : 16-bit Sample Encoding: 16-bit Signed Integer PCM In:0.00% 00:00:00.68 [00:00:00.00] Out:28.7k [ | ] Clip:0 I tried setting verbosity to 0, but it has no effect. (I'm guessing it's meant for messages other than this.) I don't just want to hide the output, which I could do easily; I want SoX to not generate it in the first place, for performance on a weak computer.

  Read the article

• Issues with Cinnamon?

  - by Corrodie

  I just recently switched my system over to Ubuntu 12.10, and decided on Cinnamon as my environment-- it all worked fine, at first. But I was poorly educated and started using Compiz and Emerald along with it--Setting both as replacements in startup processes. I now know, that's a big, big mistake. Now when loading Cinnamon, I am greeted to my background image, and only that. My only options seem to be to open a terminal. I was advised to attempt muffin --replace and mutter --replace Neither to any avail, the terminal closes, and I cannot load another one unless I completely reload. I went back to Unity, purged and autoremoved Cinnamon, emerald, and compizconfig, and attempted to reinstall Cinnamon, thinking that would solve the problem--no, it came back just as broken as before. So, I reinstalled ubuntu, then cinnamon---still broken. I'm assuming I must find a way to remove the replace commands-- but as I have no menu, I'm not positive I can do that. Is there any way I can access the startup processes via terminal? I'd think though, if I completely removed Cinnamon, all configurations would be gone too, so, it's just not making much sense. Is there some kind of reset I could possibly do? I've been browsing forums and questions here, all leading to things I'd already done, so, it can't hurt to ask for myself. I apologize if you would rather I have posted this over at mint. Next time, I will definitely check compatibility instead of assuming something just has to work. Any help is greatly appreciated, thanks! ****EDIT***** It seems although it didn't allow me to do it before, I was now allowed to access the settings and startup processes for Cinnamon via Unity, and, after quickly removing aforementioned processes- I'm up and running again.

  Read the article

• sql server log shipping

  - by voam

  I am setting up log shipping with two 2008 sql servers connecting with a vpn. As far as I know as long as the sql agent is able to access the share on the primary/secondary servers everything will work. When I set up the Log shipping on the primary server using SQL Mangagement Studio, before I can set any of the "Secondary Database Settings" it asks me to connect to the secondary server. But I really don't want to open up the connection to the secondary server. I will be initialing this secondary database with a backup so as long as the transaction logs get copies everything should work. How to I work around the GUI not enabling any of the settings for the secondary server until I actually connect to it? Thanks in advance!

  Read the article

• Dual monitors, screen resolution, xorg.conf.d

  - by Flase

  I do a lot of RTFM but this one has got me stuck. I have Ubuntu Studio 12.04 Precise Pangolin with XFCE as its default desktop. My old HIS ATI Radeon 9250 graphics card was adding red crud across the screen with the generic driver, but downloading the proprietary "fglrx" driver makes it work cleanly. The trouble is the Catalyst control centre refuses to recognise my old card so I must do some manual configuring to make sure both the DVI and VGA monitors are capable of the correct screen resolution (both 1280x1024) and a dual display. It used to be easier to just edit the existing xorg.conf file and add another resolution and so forth, but now there are automatic xorg.conf.d directories (more than one) with scant documentation. Creating a generic xorg.conf with a terminal command creates every setting imaginable. What I want to do is create the simplest conf file which just tells the system the following: My VGA monitor can do 1280x1024 60Hz The two monitors together may be 2560x1024 width The VGA monitor on the right I might need to specify Xinerama if it's needed Thank you. I don't think I need to bore you with log files, but please ask for further info. Mike

  Read the article

• What is the advantage of iSCSI over SMB?

  - by sofakng

  At my house I'm running a Hyper-V server with a Windows Server 2008 R2 VM acting as a file server. Files are shared across my network using SMB. (Also, the machine is using a PERC 6/i RAID card but I don't think that's important) I'm thinking about setting up a dedicated SAN (iSCSI) machine and then switching my Hyper-V server to ESXi. What are the advantages of using iSCSI versus SMB? I think I would still need a file server OS (eg. Win 2k8) sharing files via SMB so I'm not sure the end result would be any different than my current setup...

  Read the article

• Joomla 1.5 Media Manager sets incorrect file permissions when uploading

  - by Scott Mayfield

  Howdy all, I have a Joomla 1.5 installation running on Windows Server 2008, installed via the Web Platform Installer. When uploading images with the media manager (native uploader, not the flash bulk uploader), the files arrive on the server correctly, but are given incorrect permissions. Specifically, the IIS_IUSRS group is not given access to the file. I might be incorrect about what group/user is SUPPOSED to get access to the files, but so far, I've found that unless I give IIS_IUSRS access to the uploaded files, they won't appear on the site or in the media manager (appear as broken images). Once I give IIS_IUSRS permission to the files, they work fine. So far, all the research I've done has led me to linux specific fixes that involve either changing the umask on the server, or directly modifying the Joomla codebase to add an appropriate chmod command to the upload process, but I really don't want to modify Joomla directly. I have to believe there's a setting here somewhere that will do the job, either on the Joomla or Windows side of the equation. Any thoughts? Scott

  Read the article

• OpenVPN Setup - Service Won't Start

  - by Lenwood

  I'm in the process of setting up OpenVPN on a VPS running Debian 6. I've walked step-by-step through this guide twice now, and I can't get the service to start. When I start the service, the error reported in the log file is: Cannot ioctl TUNSETIFF tun: Inappropriate ioctl for device (errno=25) I've searched the web a few times and I'm not finding anything helpful. I've tried: Changing file permissions: no change Deleting the file: get an error stating no file found (errno=2) Making a folder named "tun": get an error stating no file found (errno=2) I've wiped my installation and completed the steps verbatim twice now. I get no errors along the way, just the error above within my log file. The contents of my server.conf file are listed below, minus all the comments for brevity. Can anyone help? port 1194 proto udp dev tun ca ca.crt cert myserver.crt key myserver.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log log openvpn.log verb 3

  Read the article

• php include path problem:Same code works on Ubuntu default Apache and php conf, but not on CentOS

  - by Neo

  So the same code works on my ubuntu server but when I upload it to my dedicated hosting server running CentOS it seems to add an extra prefix of .:/usr/share/pear:/usr/share/php: I tried setting includepath to different things but it just doesn't work. the file is in a directory called language in the same folder as the file that is including it and I'm using : include dirname(FILE).DIRECTORY_SEPARATOR."language".DIRECTORY_SEPARATOR."storage.inc"; and include dirname(__FILE__)."/language/language.php"; and include "language/language.php"; and alot of other combinations but I can't get it to find the file. Fatal error: require_once() [function.require]: Failed opening required '/home/neo/public_html/migration/include/class/core/storage.inc' (include_path='.:/usr/share/pear:/usr/share/php:/home/neo/public_html/migration') in /home/neo/public_html/migration/include/class/core/class_lang.inc on line 153

  Read the article

• How to set up memcached to use unix socket?

  - by alfish

  While I could use memcached on Debian to use the default 11211 port, but I've had great difficulty setting up unix socket, Form what I'v read, I know that I need to create a memcache.socket and add -s /path/to/memcache.socket -a 0766 To /etc/memcached.conf and comment out the default connection port and IP, i.e. -p 11211 -l 127.0.0.1 However, when I restart memcached I get internal server errors on Drupal site. I'm trying to implement unix sockets to avoid TCP/IP overhead and boost overal memcached performance, however not sure how much performance gain one can expect of this tweak. I appreciate your hints or possibly configs to to resolve this.

  Read the article

• can't execute scripts compiled with shc

  - by serilain

  I'm trying to use SHC to compile a shell script so that I can set the SUID bit on it and obfuscate what it's doing (I'm attempting to have it run as part of all new users' .bashrc). As a test, I wrote a script that's simply: #!/bin/bash env And compiled it using shc -r -f script.sh However, when I try to run the resulting script by simply doing ./script.sh.x, even after setting it to 777 (just for testing purposes), I get "Operation not permitted; killed" unless I run it as sudo (which I don't want to have to do). Am I running afoul of some Ubuntu permissions that won't let me run binaries created by shc? Thanks!

  Read the article

• How do I check for available "Automatic Updates" via script / cli

  - by Lee

  I asked this on superuser, but I think this may have been a more apropriate place. We are trying to automate server reboots, but one of the "gotchas" we are running into are that they want us to install updates by manually clicking "sure, install updates" during monthly Windows reboots. If I had a way to check to see if updates are in fact waiting, we'd be ok with rebooting automatically via a script and just failing if this is the case. My problem is I can't figure out how to check to see if there are in fact updates waiting to be installed, without logging in. Is there a file or particular service status I can check for? Maybe with Powershell or something similar? The current setting used is "Download updates but do not install automatically"

  Read the article

• Getting Started with GlassFish 4 and OEPE

  - by gstachni

  Oracle Enterprise Pack for Eclipse 12.1.1.2.2 introduces new support for GlassFish 4.0, the reference implementation of Java EE7.  Getting started with GlassFish 4.0 in Eclipse couldn't be easier. Follow these short steps to get GlassFish 4.0 setup so you can start developing, deploying, and debugging your Java EE7 applications. Prerequisites GlassFish 4.0 Oracle Enterprise Pack for Eclipse 12.1.1.2.2+ from OTN or Eclipse Marketplace Setting up the server connection In the Servers view, click to add a New > Server . Select GlassFish 4.0 from the list of supported server configurations. Pick your GlassFish installation directory (usually <glassfish 4>/glassfish) and select your domain. After you click Finish you should now be setup to launch Glassfish 4.0 in normal and debug mode within Eclipse as well as associate projects for deployment through the Add and Remove wizard. Using GlassFish tools in Eclipse GlassFish server tools provide some useful information about your running GlassFish 4.0 environment. Resources displays current resources deployed in the domain including your JDBC Connection Pool and JDBC Resource names. I find this extra bit of information useful when working with JPA. Deployed Applications shows the current active deployments in GlassFish which can be undeployed as needed from within Eclipse. Deployed Web Services provides information about SOAP-based web services deployed in this domain. Also with the running server are quick launch links to open the Administrative Console, Server Logs, and the GlassFish Community Site all within Eclipse's embedded browser.

  Read the article

• cannot run CMD script from Vista windows explorer

  - by jamesvista

  I am running Vista Home Premium. I tried to write a script to do some simple automation.... it does not work! even the most simple script like: @echo ON dir . does not get executed and only an empty CMD shell pops open when started from explorer. From the cmd windows there is no problem. This is really weird and I have never seen this before (but wrote many CMD scripts before) ftype cmdfile and batfile are unchanged from "%1" %* virusscan done - no problems Is there a policy setting that might have changed? Any ideas?

  Read the article

• What are the requirements to test a website using jquery.get() ? [migrated]

  - by Frankie

  I am working on a simple website. It has to search quite a few text files in different sub-folders. The rest of the page uses jquery, so I would like to use it for this also. The function I am looking at is .get() for downloading the files. So my main question is, can I test this on my local computer (Ubuntu Linux) or do I have to have it uploaded to a server? Also, if there's a better way to go about this, that would be nice to know. However, I'm more worried about getting it working. Thanks, Frankie PS: Heres the JS/jQuery code for downloading the files to an array. g_lists = new Array(); $(":checkbox").each(function(i){ if ($(this).attr("name") != "0") { var path = "../" + $(this).attr("name") + ".txt"; $("#bot").append("<br />" + path); // debug $.get(path, function(data){ g_lists[i] = data; $("#bot").html(data); }); } else { g_lists[i] = ""; } }); Edit: Just a note about the path variable. I think it's correct, but I'm not 100% sure. I'm new to web development. Here's some examples it produces and the directory tree of the site. Maybe it will help, can't hurt. . +-- include ¦   +-- jquery.js ¦   +-- load.js +-- index.xhtml +-- style.css +-- txt    +-- Scripting_Tools    +-- Editors.txt    +-- Other.txt Examples of path: ../txt/Scripting_Tools/Editors.txt ../txt/Scripting_Tools/Other.txt Well I'm a new user, so I can't "answer" my own question, so I'll just post it here: After asking for help on a IRC chat channel specific to jQuery, I was told I could use this on a local host. To do this I installed Apache web server, and copied my site into it's directory. More information on setting it up can be found here: http://www.howtoforge.com/ubuntu_debian_lamp_server Then to run the site I navigated my browser to "localhost" and everything works.

  Read the article

• Outlook 2007 Clients attachments not opening correctly

  - by Az

  Hello, Thanks for taking the time to read this. We are having an issue on our Terminal Server clients that has me perplexed. We are running Server2003 x64 and Exchange 2007 environment. When we attempt to open an attachment for example .jpeg and the user selects to open the file, it prompts them to select a program to open the file with. The file associations apear to be fine, if I save the document to the desktop and open it, it opens with the correct program automatically. If i select "always open using this program" it will then open automatically, but I don't want to have to do this for all file types we open regularly on each client. Is this some sort of Exchange server security setting that is forcing them to associate the file? Does outlook or exchange maintain its own file association database? Thanks for reading!

  Read the article

• AdvanceTimePolicy and Point Event Streams In StreamInsight.

  There are a number of ways to issues CTIs (Current Time Increments) into your StreamInsight streams but a quite useful way is to do it declaratively on your source factory like this public AdapterAdvanceTimeSettings DeclareAdvanceTimeProperties<TPayload>(InputConfig configInfo, EventShape eventShape) {     return new AdapterAdvanceTimeSettings(         new AdvanceTimeGenerationSettings(configInfo.CtiFrequency, TimeSpan.FromTicks(-1)),         AdvanceTimePolicy.Adjust); } This will issue a CTI after every event and allows no delay (for delayed events) by stamping the CTI with the timestamp of the last event minus 1 tick. The very last statement "AdvanceTimePolicy.Adjust" tells the adapter what to do with events that violate the policy (arrive late).  From BOL "Events that violate the inserted CTI are moved in time if their lifetime overlaps with the CTI timestamp. That is, the start timestamp of the events is set to the most recent CTI timestamp, which renders those events valid. If both start and end time of an event fall before the CTI timestamp, then the event is dropped." This means that if you are using this method of inserting CTIs for a Point event stream and have specified "AdvanceTimePolicy.Adjust" for the violation policy, this setting will be ignored and instead it will use "AdvanceTimePolicy.Drop" because a Point event can never straddle a CTI.

  Read the article

• Hosting a web site at home: ISP Blocking port 80?

  - by tombull89

  Hello, I presume this is a better place to put this rather than server fault. I'm interested in setting up a small site to host at home as a "proof of concept" exercise, i.e. to prrove that I know how to do it. I've got a (virtual) server 2003 machine with a site on it, all configured with port forwarding through to 80 on my server. I have a Belkin F5D7634 which I have put my DYNDNS details in but when I try to go to my DYNDNS address it comes up with the page cannot be displayed. My ISP is Carphone Warehouse/AOL and I've been unable to find any information if they block port 80. If they do, can anybody reccomend a home provider that does not block port 80? Regards, Tom.

  Read the article

• Limit ftp users to only certain directories in Ubuntu

  - by George

  There are several questions around limiting ftp users to certain directories. However, most of them refer to vsftpd, which I don't think I have installed on my system. I'm running Ubuntu 9.04. How can I tell what ftp service I have installed, and then limit certain users to only the /home/ftpuser directory instead of having full access to the file system? I think I can add them to a separate group and give that group access to the proper directories, but then do I have to remove that groups permissions from all other directories? It seems like there should be an easy way like setting the chroot_local_user value in the /etc/vsftpd/vsftpd.conf file, but that doesn't exist on my system.

  Read the article

< Previous Page | 295 296 297 298 299 300 301 302 303 304 305 306  | Next Page >