Search Results

Search found 60153 results on 2407 pages for 'base system device'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 3/2407 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • HSDPA modem only working on certain USB ports

    - by nabulke
    Depending on which USB port I use to connect my HSDPA modem, the network manager will connect to the internet or not. I used to work (i.e. established a internet connection automatically) on all ports, but over time it simply stopped on some ports. lsusb output in all cases looks like that (Device ID varies depending on USB port): Bus 001 Device 009: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Any ideas what could cause this behaviour? What can I do to fix this? ADDED One additional information about the modem: if connected via USB it will be available as as harddrive AND as a HSDPA modem (kind of a duality...). In the error case, it will only be shown as a harddrive. ADDITIONAL INFO AS REQUESTED MODEM NOT WORKING Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:8000 Dell Computer Corp. BC02 Bluetooth Adapter Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 007: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 005: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 001 Device 004: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 003: ID 413c:0058 Dell Computer Corp. Port Replicator Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub laptop:~$ dmesg | grep 'usb' [ 0.225371] usbcore: registered new interface driver usbfs [ 0.225387] usbcore: registered new interface driver hub [ 0.225418] usbcore: registered new device driver usb [ 0.504291] usb usb1: configuration #1 chosen from 1 choice [ 0.504767] usb usb2: configuration #1 chosen from 1 choice [ 0.505046] usb usb3: configuration #1 chosen from 1 choice [ 0.505601] usb usb4: configuration #1 chosen from 1 choice [ 1.061064] usb 1-6: new high speed USB device using ehci_hcd and address 3 [ 1.192636] usb 1-6: configuration #1 chosen from 1 choice [ 1.447006] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 1.634908] usb 2-2: configuration #1 chosen from 1 choice [ 1.708164] usb 1-6.1: new high speed USB device using ehci_hcd and address 4 [ 1.801668] usb 1-6.1: configuration #1 chosen from 1 choice [ 2.076279] usb 1-6.1.1: new low speed USB device using ehci_hcd and address 5 [ 2.174932] usb 1-6.1.1: configuration #1 chosen from 1 choice [ 6.580315] usb 1-6.1.2: new high speed USB device using ehci_hcd and address6 [ 6.683479] usb 1-6.1.2: configuration #1 chosen from 1 choice [ 20.018671] usbcore: registered new interface driver btusb [ 20.131703] usbcore: registered new interface driver usb-storage [ 20.131988] usb-storage: device found at 6 [ 20.131991] usb-storage: waiting for device to settle before scanning [ 20.207981] usb 1-6.1.2: USB disconnect, address 6 [ 20.291499] usbcore: registered new interface driver hiddev [ 20.297052] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1.1/1-6.1.1:1.0/input/input6 [ 20.297465] generic-usb 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.7-6.1.1/input0 [ 20.297534] usbcore: registered new interface driver usbhid [ 20.297803] usbhid: v2.6:USB HID core driver [ 26.552360] usb 1-6.1.2: new high speed USB device using ehci_hcd and address 7 [ 26.663506] usb 1-6.1.2: configuration #1 chosen from 1 choice [ 26.709628] usb-storage: device found at 7 [ 26.709631] usb-storage: waiting for device to settle before scanning [ 26.732387] usb-storage: device found at 7 [ 26.732390] usb-storage: waiting for device to settle before scanning [ 31.709568] usb-storage: device scan complete [ 31.733676] usb-storage: device scan complete MODEM WORKING Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c00c Logitech, Inc. Optical Wheel Mouse Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:8000 Dell Computer Corp. BC02 Bluetooth Adapter Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg | grep 'usb' [ 0.134811] usbcore: registered new interface driver usbfs [ 0.134826] usbcore: registered new interface driver hub [ 0.134858] usbcore: registered new device driver usb [ 0.360327] usb usb1: configuration #1 chosen from 1 choice [ 0.360783] usb usb2: configuration #1 chosen from 1 choice [ 0.361061] usb usb3: configuration #1 chosen from 1 choice [ 0.361611] usb usb4: configuration #1 chosen from 1 choice [ 1.144122] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 1.346896] usb 2-2: configuration #1 chosen from 1 choice [ 1.588072] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 1.761204] usb 3-1: configuration #1 chosen from 1 choice [ 5.972042] usb 1-1: new high speed USB device using ehci_hcd and address 4 [ 6.115438] usb 1-1: configuration #1 chosen from 1 choice [ 19.990565] usbcore: registered new interface driver usbserial [ 19.991429] usb-storage: device found at 4 [ 19.991432] usb-storage: waiting for device to settle before scanning [ 20.017260] usbcore: registered new interface driver usb-storage [ 20.017305] usbcore: registered new interface driver usbserial_generic [ 20.017308] usbserial: USB Serial Driver core [ 20.017817] usb-storage: device found at 4 [ 20.017820] usb-storage: waiting for device to settle before scanning [ 20.070796] usbcore: registered new interface driver btusb [ 20.229525] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0 [ 20.229776] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1 [ 20.229843] usbcore: registered new interface driver option [ 20.230396] usbcore: registered new interface driver hiddev [ 20.246280] input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input6 [ 20.246438] generic-usb 0003:046D:C00C.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1/input0 [ 20.246479] usbcore: registered new interface driver usbhid [ 20.246483] usbhid: v2.6:USB HID core driver [ 25.436579] usb-storage: device scan complete [ 25.437674] usb-storage: device scan complete

    Read the article

  • Object-Oriented Operating System

    - by nmagerko
    As I thought about writing an operating system, I came across a point that I really couldn't figure out on my own: Can an operating system truly be written in an Object-Oriented Programming (OOP) Language? Being that these types of languages do not allow for direct accessing of memory, wouldn't this make it impossible for a developer to write an entire operating system using only an OOP Language? Take, for example, the Android Operating System that runs many phones and some tablets in use around the world. I believe that this operating system uses only Java, an Object-Oriented language. In Java, I have been unsuccessful in trying to point at and manipulate a specific memory address that the run-time environment (JRE) has not assigned to my program implicitly. In C, C++, and other non-OOP languages, I can do this in a few lines. So this makes me question whether or not an operating system can be written in an OOP, especially Java. Any counterexamples or other information is appreciated.

    Read the article

  • c++ casting base class to derived class mess

    - by alan2here
    If I were to create a base class called base and derived classes called derived_1, derived_2 etc... I use a collection of instances of the base class, then when I retrieved an element and tried to use it I would find that C++ thinks it's type is that of the base class, probably because I retrieved it from a std::vector of base. Which is a problem when I want to use features that only exist for the specific derived class who's type I knew this object was when I put it into the vector. So I cast the element into the type it is supposed to be and found this wouldn't work. (derived_3)obj_to_be_fixed; And remembered that it's a pointer thing. After some tweaking this now worked. *((derived_3*)&obj_to_be_fixed); Is this right or is there for example an abc_cast() function that does it with less mess?

    Read the article

  • Is a base class with shared fields and functions good design

    - by eych
    I've got a BaseDataClass with shared fields and functions Protected Shared dbase as SqlDatabase Protected Shared dbCommand as DBCommand ... //also have a sync object used by the derived classes for Synclock'ing Protected Shared ReadOnly syncObj As Object = New Object() Protected Shared Sub Init() //initializes fields, sets connections Protected Shared Sub CleanAll() //closes connections, disposes, etc. I have several classes that derive from this base class. The derived classes have all Shared functions that can be called directly from the BLL with no instantiation. The functions in these derived classes call the base Init(), call their specific stored procs, call the base CleanAll() and then return the results. So if I have 5 derived classes with 10 functions each, totaling 50 possible function calls, since they are all Shared, the CLR only calls one at a time, right? All calls are queued to wait until each Shared function completes. Is there a better design with having Shared functions in your DAL and still have base class functions? Or since I have a base class, is it better to move towards instance methods within the DAL?

    Read the article

  • System.Threading.ThreadAbortException executing WCF service

    - by SURESH GIRIRAJAN
    In one of our prod server we recently ran into issue when we went and update the web.config and try to browse the service. We started seeing the service was not responding and getting the following warning in the application log. Our service is WCF service, BizTalk orchestration exposed as service. We have other prod server where we never ran into this issue, so what’s different with this server. After going thru lot of forum and came up on some Microsoft service pack and hot fix which related to FCN. But I don’t want to apply any patch on this server then we need to do on all the other servers too. So solution is simple, I dropped the existing website, created a new site with different name with updated web.config browse the service. Then dropped that site and recreate the original web site and it worked fine without any issue. Event Viewer:  Event Type:        Warning Event Source:    ASP.NET 2.0.50727.0 Event Category:                Web Event Event ID:              1309 Date:                     6/6/2011 Time:                    5:41:42 PM User:                     N/A Computer:          PRODP02 Description: Event code: 3005 Event message: An unhandled exception has occurred. Event time: 6/6/2011 5:41:42 PM Event time (UTC): 6/6/2011 9:41:42 PM Event ID: a71769f42b304355a58c482bfec267f2 Event sequence: 3 Event occurrence: 1 Event detail code: 0  Application information:     Application domain: /LM/W3SVC/518296899/ROOT/PortArrivals-2-129518698821558995     Trust level: Full     Application Virtual Path: /TESTSVC     Application Path: D:\inetpub\wwwroot\RFID\TESTSVC\     Machine name: PRODP02  Process information:     Process ID: 8752     Process name: w3wp.exe     Account name: domain\BizTalk_Svc_Hostlso  Exception information:     Exception type: ThreadAbortException     Exception message: Thread was being aborted.  Request information:     Request URL: http://localhost:81/TESTSVC/TESTSVCS.svc     Request path: /TESTSVC/TESTSVCS.svc     User host address: 127.0.0.1     User:      Is authenticated: False     Authentication Type:      Thread account name: domain\BizTalk_Svc_Hostlso  Thread information:     Thread ID: 22     Thread account name: domain\BizTalk_Svc_Hostlso     Is impersonating: False     Stack trace:    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)    at System.Web.HttpApplication.ApplicationStepManager.ResumeSteps(Exception error)  at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)    at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)  <Description>Handling an exception.</Description> <AppDomain>/LM/W3SVC/518296899/ROOT/TESTSVC-6-129518741899334691</AppDomain> <Exception> <ExceptionType>System.Threading.ThreadAbortException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType> <Message>Thread was being aborted.</Message> <StackTrace> at System.Threading.Monitor.Enter(Object obj) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.HandleRequest() at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.BeginRequest() at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.OnBeginRequest(Object state) at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke2() at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke() at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ProcessCallbacks() at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.CompletionCallback(Object state) at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ScheduledOverlapped.IOCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped) at System.ServiceModel.Diagnostics.Utility.IOCompletionThunk.UnhandledExceptionFrame(UInt32 error, UInt32 bytesRead, NativeOverlapped* nativeOverlapped) </StackTrace> <ExceptionString>System.Threading.ThreadAbortException: Thread was being aborted.    at System.Threading.Monitor.Enter(Object obj)    at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath)    at System.ServiceModel.ServiceHostingEnvironment.EnsureServiceAvailableFast(String relativeVirtualPath)    at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.HandleRequest()    at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.BeginRequest()    at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.OnBeginRequest(Object state)    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke2()    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.WorkItem.Invoke()    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ProcessCallbacks()    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.CompletionCallback(Object state)    at System.ServiceModel.Channels.IOThreadScheduler.CriticalHelper.ScheduledOverlapped.IOCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped)    at System.ServiceModel.Diagnostics.Utility.IOCompletionThunk.UnhandledExceptionFrame(UInt32 error, UInt32 bytesRead, NativeOverlapped* nativeOverlapped)</ExceptionString>

    Read the article

  • USB Drive Not recognized

    - by user36582
    My Friend's Pen Drive, which was working well very well just few days ago, is not being recognized after getting used by a virus affected machine. Its not on fdisk -l or lsusb However in dmesg I can see the following: [ 977.300013] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 977.420014] usb 5-2: device descriptor read/64, error -71 [ 977.644023] usb 5-2: device descriptor read/64, error -71 [ 977.860013] usb 5-2: new full speed USB device using uhci_hcd and address 3 [ 977.980013] usb 5-2: device descriptor read/64, error -71 [ 978.204013] usb 5-2: device descriptor read/64, error -71 [ 978.420013] usb 5-2: new full speed USB device using uhci_hcd and address 4 [ 978.828015] usb 5-2: device not accepting address 4, error -71 [ 978.940015] usb 5-2: new full speed USB device using uhci_hcd and address 5 [ 979.348013] usb 5-2: device not accepting address 5, error -71 [ 979.348292] hub 5-0:1.0: unable to enumerate USB device on port 2 [ 1017.848015] usb 5-2: new full speed USB device using uhci_hcd and address 6 [ 1017.968012] usb 5-2: device descriptor read/64, error -71 [ 1018.192017] usb 5-2: device descriptor read/64, error -71 [ 1018.408014] usb 5-2: new full speed USB device using uhci_hcd and address 7 [ 1018.528012] usb 5-2: device descriptor read/64, error -71 [ 1018.752023] usb 5-2: device descriptor read/64, error -71 [ 1018.968012] usb 5-2: new full speed USB device using uhci_hcd and address 8 [ 1019.376019] usb 5-2: device not accepting address 8, error -71 [ 1019.488011] usb 5-2: new full speed USB device using uhci_hcd and address 9 [ 1019.896016] usb 5-2: device not accepting address 9, error -71 [ 1019.896308] hub 5-0:1.0: unable to enumerate USB device on port 2 [ 1049.984016] usb 5-1: new full speed USB device using uhci_hcd and address 10 [ 1050.104014] usb 5-1: device descriptor read/64, error -71 [ 1050.328014] usb 5-1: device descriptor read/64, error -71 [ 1050.544014] usb 5-1: new full speed USB device using uhci_hcd and address 11 [ 1050.664018] usb 5-1: device descriptor read/64, error -71 [ 1050.888019] usb 5-1: device descriptor read/64, error -71 [ 1051.104025] usb 5-1: new full speed USB device using uhci_hcd and address 12 [ 1051.512014] usb 5-1: device not accepting address 12, error -71 [ 1051.624101] usb 5-1: new full speed USB device using uhci_hcd and address 13 [ 1052.032014] usb 5-1: device not accepting address 13, error -71 [ 1052.032991] hub 5-0:1.0: unable to enumerate USB device on port 1 What these Errors actually mean and how Can I get this pen drive Back to work ??

    Read the article

  • USB device goes to "Unknown device" randomly

    - by ILovePaperTowels
    We have a kiosk that uses a bio scanner from m2sys (usb device). It scans your palm to recognize you. Every so often, maybe 1-3 times a day, the bio scanner will become an unknown device. We are unable to see any patterns or commonalities. When we unplug and plug it back in, it becomes available again. We have custom software that uses the bio scanner's software to communicate with it. We've added a crap load of logging on everything but there doesn't seem to be any pattern of when the thing shuts off. We have these devices deployed to multiple locations (100+) and they are all seeing the issues but we can not reproduce it here, at the main office. I've evaluated the software and I don't see anything. I'm thinking it's a driver or hardware issue (but we can't reproduce the issues here in the main office) or maybe environmental interference of some sort like from scan guns, automatic doors, microwaves or something else. Any ideas would be welcome. I'm looking for possible causes of the usb device becoming unknown or ways to figure out what the cause is. no other usb devices have this issue, only the scanner We've contacted the manufacturer and they blame our software We're getting help from Microsoft, but they haven't found anything OS is embedded XP http://www.m2sys.com/palm-vein-reader.htm

    Read the article

  • OSS4 on Debian Squeeze

    - by mit
    Hi, I am trying to get OSS4 to work on a Debian Squeeze 64 bit machine with an usb sound adapter. There is no sound from this adapter at the present, although it worked just before on the previous installation. You can see the output of some commands here: $ sudo /etc/init.d/oss4-base restart Stopping Open Sound System: SNDCTL_MIX_EXTINFO: No such device or address done. Starting Open Sound System: done (OSS is already loaded). $ sudo /etc/init.d/oss4-base stop Stopping Open Sound System: SNDCTL_MIX_EXTINFO: No such device or address done. $ sudo /etc/init.d/oss4-base start Starting Open Sound System: done (OSS is already loaded). $ ossinfo Version info: OSS 4.2 (b 2002/201001250441) (0x00040100) GPL Platform: Linux/x86_64 2.6.32-5-xen-amd64 #1 SMP Fri Dec 10 17:41:50 UTC 2010 (pc11) Number of audio devices: 2 Number of audio engines: 2 Number of MIDI devices: 0 Number of mixer devices: 2 Device objects 0: osscore0 OSS core services 1: oss_hdaudio0 ATI HD Audio interrupts=0 (613) HD Audio controller ATI HD Audio Vendor ID 0x10024383 Subvendor ID 0x10192816 Codec 0: Not present 2: oss_usb0 USB audio core services 3: usb0d8c0126-0 USB sound device 4: usb0d8c0126-1 USB sound device 5: usb0d8c0126-2 USB sound device 6: usb0d8c0126-3 USB sound device MIDI devices (/dev/midi*) Mixer devices 0: (USB sound device )(Mixer 0 of device object 3) 1: USB sound device (Mixer 0 of device object 5) Audio devices (USB sound device play /dev/oss/usb0d8c0126-1/pcm0 ) (device index 0) USB sound device play /dev/oss/usb0d8c0126-3/pcm0 (device index 1) Nodes /dev/dsp -> /dev/oss/usb0d8c0126-1/pcm0 /dev/dsp_out -> /dev/oss/usb0d8c0126-1/pcm0 /dev/dsp_mmap -> /dev/oss/usb0d8c0126-1/pcm0 $ osstest Sound subsystem and version: OSS 4.2 (b 2002/201001250441) (0x00040100) Platform: Linux/x86_64 2.6.32-5-xen-amd64 #1 SMP Fri Dec 10 17:41:50 UTC 2010 *** Scanning sound adapter #-1 *** /dev/oss/usb0d8c0126-1/pcm0 (audio engine 0): USB sound device play - Device not present - Skipping *** Scanning sound adapter #-1 *** /dev/oss/usb0d8c0126-3/pcm0 (audio engine 1): USB sound device play - Performing audio playback test... /dev/oss/usb0d8c0126-3/pcm0: No such file or directory Can't open the device *** Some errors were detected during the tests *** $ ossxmix /dev/oss/usb0d8c0126-2/mix0: No such file or directory No mixers could be opened $ ossmix SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ man ossmix ad@pc11:~$ ossmix -a SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ man ossmix ad@pc11:~$ ossmix -D SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ ossmix -D 0 SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ man ossmix ad@pc11:~$ ossxmix /dev/oss/usb0d8c0126-2/mix0: No such file or directory No mixers could be opened How can I make oss sound work? I can add more information if necessary.

    Read the article

  • What's the diffrence btw System property and system environment variable

    - by khue
    Hi all I am not clear about this. When I run a java App or run an Applet in applet viewer,( in the IDE environment), System.getProperty("java.class.path") give me the same as System.getenv("CLASSPATH"), which is the CLASSPATH env variable defined. But when I deploy my applet to webserver and access it from the same computer as a client, I get different result for the two (System.getProperty("java.class.path") only point to jre home and System.getenv("CLASSPATH") return null). And here is some other things that make me wonder: For the applet part, the env var JAVA_HOME, i get the same result when deploying the applet in a browser as well as Applet Viewer. And if I define myself a env variable at system level, and use getenv("envName") the result is null. Is there anyway I can define one and get it in my java program? Thanks a lot Regards K.

    Read the article

  • "The directory name is invalid" when trying to install drivers in Windows 7 via Device Manager

    - by Luke
    First off, this computer is not mine, it's a customer's system. Having said that... The hard drive was moved to a new motherboard, CPU, RAM combo, and booted up fine. Customer puts in driver CD, drivers won't load. He brings it into me. Under Device Manager for Windows 7 x64, I see lots of PCI to PCI bridge, one SMBus Controller, and about 20 Unknown Devices. Greeeeeat... So I start with the SMBus driver directly from the Asus website for the motherboard (P8H77-M Pro). If I install from the setup program, it tells me to reboot, then it starts the install. It gets half way through the setup, then fails (An unknown error occurred. Setup will exit). When I try to point to the folder from Device Manager, it starts copying files for the driver, even presents me with the proper name of the device, but says that an error has occurred there as well: The directory name is invalid. Doing some Googling, I saw that many people had this issue with Vista. K, Vista and 7 are similar, maybe the solutions are the same... But they aren't. I tried: Copying the entire driver folder and setup utility to the Program Files folder and running it / selecting it in DM Downloading another set of drivers in case this one is corrupt Disabling UAC Deleting and recreating the %WINDIR%\TEMP folder Removing all references to previous hardware that I could find, even in Device Manager's hidden mode So far, nothing has worked. A wipe and reload will be out of the question

    Read the article

  • Why does this loopback device creation malfunction?

    - by user50118
    The stackoverflow people thought this was more appropriate here, I put it there as it is part of a program but I can see their POV, so here it is: At the bottom of the code you can see it failing. In fact, I'll put it here at the start too because it is the problem I need to solve: [350591.924819] EXT4-fs (loop0): bad geometry: block count 9750806 exceeds size of device (9750168 blocks) I don't understand why the device is supposedly too small. I made this partition two days ago with normal fdisk, it was created and formatted with ext4 supplying no options other than the partition (/dev/sdb2) to format. The only explaination I can think of is that ext4 has the size of the partition wrong somehow but that seems very unlikely. What is wrong with my math? The offset is correct, you can see that with the file command, and the size should be correct too because End - Start comes to the same number of sectors minus 1, just like it should (A disk starting on sector 1 and ending on sector 2 would be 2 - 1 = 1 and have two sectors). # sfdisk -luS /dev/sdb Disk /dev/sdb: 9729 cylinders, 255 heads, 63 sectors/track Units = sectors of 512 bytes, counting from 0 Device Boot Start End #sectors Id System /dev/sdb2 78295040 156296384 78001345 83 Linux # losetup -r -f --show -o $((78295040 * 512)) --sizelimit $((78001345 * 512)) /dev/sdb /dev/loop0 # file -s /dev/loop0 /dev/loop0: Linux rev 1.0 ext4 filesystem data (needs journal recovery) (extents) (large files) (huge files) # mount -o ro -t ext4 /dev/loop0 /mnt mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # dmesg | tail -n 1 [350591.924819] EXT4-fs (loop0): bad geometry: block count 9750806 exceeds size of device (9750168 blocks)

    Read the article

  • basic device that can connect to internet

    - by Hellnar
    Hello, I am looking for a cheap solution to my problem: I need to find either an already existing common device (that is used in restaurants, bars clubs) or a cheap new device that I will distribute to those places, which can connect to internet (via the already existing ethernet or wireless based internet) and do HTTP request/receive response and retrieve information ? (For instance can a POS device connect to internet?) For a project, I need to do identity validation on several restaurants and bars and not all of them have computers. So I will be giving "cheap and easy to use devices" and non-IT personal can use it to do http request to my server and get response. All I can think of is Cell phones and SMS.

    Read the article

  • Choose an output audio device different from the default on WMP 11

    - by GetFree
    I like to play my music through a Hi-Fi audio equipment and everything else (like windows sounds, web videos and such) through my default PC speakers. On WIndows XP I had WMP 9 and I could do that with no problems since I can choose what audio device (which sound card) to use, and that selection is for WMP only, which can be different from Windows' default audio device. But now that I have Windows Vista and WMP 11 I cannot longer choose an audio device just for WMP, or at least I can't find a way to do it (the control in the options dialog is no longer there). Was this useful feature really removed from WMP 11? or there is some other way to do it?

    Read the article

  • How to get Bus and Device relationship for a /dev/ttyUSB

    - by Ernesto Campohermoso
    I need to write an script for restart USB dongles. I have all tools but I can't link my /dev/ttyUSBx to physical BUS and DEVICE. An issue is that I have three dongles with the same id vendor and id product. If I do lsusb the output is: Bus 001 Device 004: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 006: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 007: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem Bus 001 Device 002: ID 80ee:0021 Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub And I have attached it to: /dev/ttyUSB0 /dev/ttyUSB3 /dev/ttyUSB5 But I want to know which device is related with which Bus Device. By example I need to get the following: /dev/ttyUSB0 -> Bus 001 Device 006 /dev/ttyUSB3 -> Bus 001 Device 004 /dev/ttyUSB5 -> Bus 001 Device 007 I'm using Ubuntu Server 10.04 and I tested the tools: lsusb hal lsmod But I can't get the relationship.

    Read the article

  • System.ArgumentException: Invalid hex character at DecryptAssemblyResource

    - by Radu094
    My webapp is trowing these exceptions intermitently ever since we migrated to Mono + Apache: The error sounds more like a problem reading/processing some assembly, so I was wondering if I should be worried that there might be a problem with the hard-drive? System.ArgumentException: Invalid hex character at System.Web.Configuration.MachineKeySectionUtils.ToHexValue (Char c, Boolean high) [0x00000] in <filename unknown>:0 at System.Web.Configuration.MachineKeySectionUtils.GetBytes (System.String key, Int32 len) [0x00000] in <filename unknown>:0 at System.Web.Handlers.ScriptResourceHandler.GetBytes (System.String val) [0x00000] in <filename unknown>:0 at System.Web.Handlers.ScriptResourceHandler.DecryptAssemblyResource (System.String val, System.String& asmName, System.String& resName) [0x00000] in <filename unknown>:0 at System.Web.Handlers.ScriptResourceHandler.ProcessRequest (System.Web.HttpContext context) [0x00000] in <filename unknown>:0 at System.Web.Handlers.ScriptResourceHandler.System.Web.IHttpHandler.ProcessRequest (System.Web.HttpContext context) [0x00000] in <filename unknown>:0 at System.Web.HttpApplication+<Pipeline>c__Iterator2.MoveNext () [0x00000] in <filename unknown>:0 at System.Web.HttpApplication.Tick () [0x00000] in <filename unknown>:0 Method: Void Application_Error(System.Object, System.EventArgs) at File: at Line Number: 0 Method: Void ProcessError(System.Exception) at File: at Line Number: 0 Method: Void Tick() at File: at Line Number: 0 Method: Void Start(System.Object) at File: at Line Number: 0 Method: Void System.Web.IHttpHandler.ProcessRequest(System.Web.HttpContext) at File: at Line Number: 0 Method: Void Process(System.Web.HttpWorkerRequest) at File: at Line Number: 0 Method: Void RealProcessRequest(System.Object) at File: at Line Number: 0 Method: Void ProcessRequest(System.Web.HttpWorkerRequest) at File: at Line Number: 0 Method: Void ProcessRequest() at File: at Line Number: 0 Method: Void ProcessRequest(Mono.WebServer.MonoWorkerRequest) at File: at Line Number: 0 Method: Void ProcessRequest(Int32, System.String, System.String, System.String, System.String, System.String, Int32, System.String, Int32, System.String, System.String[], System.String[], System.Object) at File: at Line Number: 0 Method: Void InnerRun(System.Object) at File: at Line Number: 0 Method: Void Run(System.Object) at File: at Line Number: 0

    Read the article

  • System Center Essentials server running out of disk space due to stored old updates

    - by Ricket
    We have a System Center Essentials (SCE) server to filter updates to our laptops. We've configured it to download the update, and then the laptops get the update from this server; this of course reduces our internet bandwidth and the time it takes for employees to receive the updates, which reduces the complaints we get about how long updates take. However we currently have a total of 2,255 updates stored on the server. SCE gives a breakdown: Updates with installation errors: 29 Updates needed by computers: 280 Updates installed/up-to-date: 0 Updates with no status: 1946 Our little server has 68gb of hard disk space, and the updates are currently taking 32gb and counting. Some of the updates date back to 2003, but we can't figure out a way to delete them to free up space on the server. Right-clicking an update and clicking Uninstall threatens to remove the update from all computers, which is not what we want. Some of the updates even inform us upon viewing: This update has been replaced by a newer update. Before declining this update, it is recommended that you approve the new update first and verify that this update is no longer needed by any computers. How do you prevent your SCE server from filling its hard drive space? Is there a way to configure the server to only keep updates that are still needed? Furthermore, why (in the above breakdown of updates) are there so many updates with "no status" and 0 updates that are "installed/up-to-date"?

    Read the article

  • System displays "File system maintenance error, press ctrl+d" while booting

    - by user3215
    In my office I've Ubuntu 8.10 desktop installed and it's running for a long time. When ever the system is started, I'll get a file system maintenance error and something it's prompted for the root password or (press ctrl+d to continue). After pressing Ctrl+D the system normally boots up. I could not resolve this issue for a long time and I think something should be done in the fstab file. I'm not sure to do anything and expecting the experts here to help to perfectly fix this. Any help is appreciated. Thanks!

    Read the article

  • Entity Type specific updates in entity component system

    - by Nathan
    I am currently familiarizing myself with the entity component paradigm. For an example, take a collision system, that detects if entities collide and if they do let them explode. So the collision system has to test collision based on the position component and then set the state of those entities to exploding. But what if the "effect" (setting the state to exploding) is different for different entities? For example, a ship fades out while for an asteroid a particle system must be created. Since entities and components are only data, this must happen in some system. The collision system could do it, but then it must switch over the entity type, which in my opinion is a cumbersome and difficult to extend solution. So how do I trigger "entity type dependend" updates on an entity?

    Read the article

  • How a "Collision System" should be implemented?

    - by nathan
    My game is written using a entity system approach using Artemis Framework. Right know my collision detection is called from the Movement System but i'm wondering if it's a proper way to do collision detection using such an approach. Right know i'm thinking of a new system dedicated to collision detection that would proceed all the solid entities to check if they are in collision with another one. I'm wondering if it's a correct way to handle collision detection with an entity system approach? Also, how should i implement this collision system? I though of an IntervalEntitySystem that would check every 200ms (this value is chosen regarding the Artemis documentation) if some entities are colliding. protected void processEntities(ImmutableBag<Entity> ib) { for (int i = 0; i < ib.size(); i++) { Entity e = ib.get(i); //check of collision with other entities here } }

    Read the article

  • Corrupted File System on Dual HD/Dual Boot System

    - by Troy
    I have the following system set up: 2 drives, 1 TB each, one with Windows 7 and the other with what used to be Ubuntu 11.x After an update my system became corrupted and now the file system is apparently corrupt. The Ubuntu drive is /dev/sda2, the Windows 7 is /dev/sda1. I've tried fsck /dev/sda2 -t ext3 and that does nothing. I'm not sure what to do at this point. I don't even mind wiping the /dev/sda2 drive clean, so it will at least accept a completely new installation of Ubuntu. I just don't know how to do that. Please help. Thank you

    Read the article

  • Device Manager is constantly refreshing - what is wrong?

    - by Jook
    I ran into an quite odd problem, after installing some drivers on my Lenovo N100 0768 (Windows 7) notebook and attaching an USB-HDD. Now I have sound, but constantly the device dicsonnected sound - like every 2 seconds! Looked at the device manager and it is flashing together with the sound. A quick search on the net directed me towords driver issues or issues with attached usb-devices. No big suprise here - but how can I solve this?!

    Read the article

  • circumstances where software change leads to device damage

    - by nerorevenge
    Recently I changed a friend's OS from a really virus filled windows 7 to Ubuntu ..but kept changing os's because lsusb wouldn't detect the camera.But after coming back to windows, the camera wasn't detected, though I must point out the device driver for the camera was never found. The Sony 'technician' told me that that since the dev-manager of windows 7 couldn't detect the camera , irregardless of whether the device driver was installed, the software change must have damaged the hardware. I was wondering if there is any truth to it.

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >