Search Results

Search found 1547 results on 62 pages for 'ben clayton'.

Page 3/62 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Simple Cisco ASA 5505 config issue

    - by Ben Sebborn
    I have a Cisco ASA setup with two interfaces: inside: 192.168.2.254 / 255.255.255.0 SecLevel:100 outside: 192.168.3.250 / 255.255.255.0 SecLevel: 0 I have a static route setup to allow PCs on the inside network to access the internet via a gateway on the outside interface (3.254): outside 0.0.0.0 0.0.0.0 192.168.3.254 This all works fine. I now need to be able to access a PC on the outside interface (3.253) from a PC on the inside interface on port 35300. I understand I should be able to do this with no problems, as I'm going from a higher security level to a lower one. However I can't get any connection. Do I need to set up a seperate static route? Perhaps the route above is overriding what I need to be able to do (is it routing ALL traffic through the gateway?) Any advice on how to do this would be apprecaited. I am configuring this via ASDM but the config can be seen as below: Result of the command: "show running-config" : Saved : ASA Version 8.2(5) ! hostname ciscoasa domain-name xxx.internal names name 192.168.2.201 dev.xxx.internal description Internal Dev server name 192.168.2.200 Newserver ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 shutdown ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! interface Vlan1 nameif inside security-level 100 ip address 192.168.2.254 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 192.168.3.250 255.255.255.0 ! ! time-range Workingtime periodic weekdays 9:00 to 18:00 ! ftp mode passive clock timezone GMT/BST 0 clock summer-time GMT/BDT recurring last Sun Mar 1:00 last Sun Oct 2:00 dns domain-lookup inside dns server-group DefaultDNS name-server Newserver domain-name xxx.internal same-security-traffic permit inter-interface object-group service Mysql tcp port-object eq 3306 object-group protocol TCPUDP protocol-object udp protocol-object tcp access-list inside_access_in extended permit ip any any access-list outside_access_in remark ENABLES OUTSDIE ACCESS TO DEV SERVER! access-list outside_access_in extended permit tcp any interface outside eq www time-range Workingtime inactive access-list outside_access_in extended permit tcp host www-1.xxx.com interface outside eq ssh access-list inside_access_in_1 extended permit tcp any any eq www access-list inside_access_in_1 extended permit tcp any any eq https access-list inside_access_in_1 remark Connect to SSH services access-list inside_access_in_1 extended permit tcp any any eq ssh access-list inside_access_in_1 remark Connect to mysql server access-list inside_access_in_1 extended permit tcp any host mysql.xxx.com object-group Mysql access-list inside_access_in_1 extended permit tcp any host mysql.xxx.com eq 3312 access-list inside_access_in_1 extended permit object-group TCPUDP host Newserver any eq domain access-list inside_access_in_1 extended permit icmp any any access-list inside_access_in_1 remark Draytek Admin access-list inside_access_in_1 extended permit tcp any 192.168.3.0 255.255.255.0 eq 4433 access-list inside_access_in_1 remark Phone System access-list inside_access_in_1 extended permit tcp any 192.168.3.0 255.255.255.0 eq 35300 log disable pager lines 24 logging enable logging asdm warnings logging from-address [email protected] logging recipient-address [email protected] level errors mtu inside 1500 mtu outside 1500 ip verify reverse-path interface inside ip verify reverse-path interface outside ipv6 access-list inside_access_ipv6_in permit tcp any any eq www ipv6 access-list inside_access_ipv6_in permit tcp any any eq https ipv6 access-list inside_access_ipv6_in permit tcp any any eq ssh ipv6 access-list inside_access_ipv6_in permit icmp6 any any icmp unreachable rate-limit 1 burst-size 1 icmp permit any outside no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www dev.xxx.internal www netmask 255.255.255.255 static (inside,outside) tcp interface ssh dev.xxx.internal ssh netmask 255.255.255.255 access-group inside_access_in in interface inside control-plane access-group inside_access_in_1 in interface inside access-group inside_access_ipv6_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 192.168.3.254 10 route outside 192.168.3.252 255.255.255.255 192.168.3.252 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication telnet console LOCAL aaa authentication enable console LOCAL

    Read the article

  • JoinDomainOrWorkgroup Method FJoinOptions help

    - by Ben
    Anyone have experience of using the JoinDomainOrWorkgroup Method of the Win32_ComputerSystem Class? I want to write a powershell script to join a machine to a domain. There may be an existing computer account for the machine, and if so I want to delete it and rejoin to the domain. I've already scripted the "search and destroy" part that will delete the computer account if it exists, but just noticed the FJoinOptions switches on Technet. Trouble is - they're a bit ambiguous. Does 4 (0x4) Deletes an account when a domain exists. mean it will delete the computer account if it already exists on the domain? Also, can you specify the computername you want to join the machine under with this method, or should you do a rename and then join the domain. Cheers, Ben NB - I've been using the guide at http://msdn.microsoft.com/en-us/library/aa392154(VS.85).aspx - not sure if there's a better resource out there.

    Read the article

  • OpenSSL Handshake Failure (14094410) - Erroneous Client Certificate Check from Mobile Phone

    - by Clayton Sims
    I'm running a proxy server through Apache with modssl, which we're using to proxy POSTs from mobile devices to another internal server. This works successfully for most clients, but requests from a specific phone model (Nokia 2690) are showing a bizarre handshake failure. It looks as though OpenSSL is either requesting (or attempting to read an unsolicited) client certificate from the phone (which is especially bizarre because j2me's kssl implementation doesn't support client certs). I've disabled client certificates with the SSLVerifyClient none directive in both the virtual host conf and the modssl conf. The trace from error.log on debug level is (details redacted): [client 41.220.207.10] Connection to child 0 established (server www.myserver.org:443) [info] Seeding PRNG with 656 bytes of entropy [debug] ssl_engine_kernel.c(1866): OpenSSL: Handshake: start [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: before/accept initialization [debug] ssl_engine_io.c(1882): OpenSSL: read 11/11 bytes from BIO#7fe3fbaf17a0 [mem: 7fe3fbaf90d0] (BIO dump follows) [debug] ssl_engine_io.c(1815): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1860): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1882): OpenSSL: read 49/49 bytes from BIO#7fe3fbaf17a0 [mem: 7fe3fbaf90db] (BIO dump follows) [debug] ssl_engine_io.c(1815): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1860): +-------------------------------------------------------------------------+ [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: SSLv3 read client hello A [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: SSLv3 write server hello A [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: SSLv3 write certificate A [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: SSLv3 write server done A [debug] ssl_engine_kernel.c(1874): OpenSSL: Loop: SSLv3 flush data [debug] ssl_engine_io.c(1882): OpenSSL: read 5/5 bytes from BIO#7fe3fbaf17a0 [mem: 7fe3fbaf90d0] (BIO dump follows) [debug] ssl_engine_io.c(1815): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1860): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1882): OpenSSL: read 2/2 bytes from BIO#7fe3fbaf17a0 [mem: 7fe3fbaf90d5] (BIO dump follows) [debug] ssl_engine_io.c(1815): +-------------------------------------------------------------------------+ [debug] ssl_engine_io.c(1860): +-------------------------------------------------------------------------+ [debug] ssl_engine_kernel.c(1879): OpenSSL: Read: SSLv3 read client certificate A [debug] ssl_engine_kernel.c(1898): OpenSSL: Exit: failed in SSLv3 read client certificate A [client 41.220.207.10] SSL library error 1 in handshake (server www.myserver.org:443) [info] SSL Library Error: 336151568 error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure [client 41.220.207.10] Connection closed to child 0 with abortive shutdown (server www.myserver.org:443) I've tried enabling all ciphers and all protocols temporarily with modssl, neither of which seemed to be the issue. The phone should be using RSA_RC4_128_MD5 and SSLv3, all of which are available. Am I missing something more fundamental about what's failing here? It seemed like the certificate request might have been part of a renegotiation failure. I tried enabling SSLInsecureRenegotiation On on the virtual host, in case it was an issue of the phone's SSL not supporting the new protocol, but to no avail. Currently running: Apache/2.2.16 (Ubuntu) mod_ssl/2.2.16 OpenSSL/0.9.8o Apache proxy_html/3.0.1

    Read the article

  • How can I get the printer shares on a print server using Powershell?

    - by Ben
    I'm trying to use Powershell to get the print shares from a remote print server. I'm using: Get-WmiObject Win32_Share -computerName "print-server" I'm getting an "access denied" error: Get-WmiObject : Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) At line:1 char:14 + Get-WmiObject <<<< Win32_Share -computerName "print-server" + CategoryInfo : NotSpecified: (:) [Get-WmiObject], UnauthorizedAccessException + FullyQualifiedErrorId : System.UnauthorizedAccessException,Microsoft.PowerShell.Commands.GetWmiObjectCommand I don't get why I can's see the shares, though, as if I connect through My Computer (e.g. \\print-server\) I can see all the print shares fine. Any ideas? Thanks. Ben

    Read the article

  • ZFS: Mirror vs. RAID-Z

    - by John Clayton
    I'm planning on building a file server using OpenSolaris and ZFS that will provide two primary services - be an iSCSI target for XenServer virtual machines & be a general home file server. The hardware I'm looking at includes 2x 4-port SATA controllers, 2x small boot drives (one on each controller), and 4x big drives for storage. This allows one free port per controller for upgrading the array down the road. Where I'm a little confused is how to setup the storage drives. For performance, mirroring appears to be king. I'm having a hard time seeing what the benefit would be of using RAIDZ over mirroring would be. With this setup I can see two options - two mirrored pools in one stripe, or RAIDZ2. Both should protect against 2 drive failures, and/or one controller failure...the only benefit of RAIDZ2 would be that any 2 drives could fail. The storage should be 50% of capacity in both cases, but the first should have much better performance, right? The other thing I'm trying to wrap my mind around is the benefit of mirrored arrays with more than two devices. For data integrity what, if any, would be the benefit of a RAIDZ over a three-way mirror? Since ZFS maintains file integrity what does RAIDZ bring to the table...doesn't ZFS's integrity checks negate the value of RAIDZ's parity?

    Read the article

  • How to recertify Notes .id file if you can't get into Notes Admin

    - by Ben
    I've got a bit of a catch-22 situation here. My company used to use Notes, but migrated to Exchange several years ago. As such the Notes server was mothballed. I now need to get back into Notes to get some data from an old app we had. The trouble is, all my .id files have expired. I can't recertify them, as I can't log into Notes Admin - because the .id has expired. Is there any way round this? Thanks, Ben

    Read the article

  • Which IMAP flags are reliably supported across most mail servers?

    - by Ben Butler-Cole
    I am writing an application which reacts to emails sent to a mailbox. It retrieves the emails via IMAP. It will be deployed to a number of systems where I do not control the mail server configuration. I would like to use IMAP flags to indicate which messages have been handled. Are the system flags sufficiently widely supported that I can reasonably depend on them in my application? Are user-defined flags sufficiently widely supported? (If the answer is "ha ha, not a chance", then I shall use folders instead.) Thanks -Ben

    Read the article

  • On Windows XP, Start > Run "My Documents" sometimes doesn't work

    - by Clayton Hughes
    On all of my home computers, I can enter "my documents" into the Start Run prompt and the My Documents folder of the current profile will open up. What's more, I can continue typing subfolders, files, etc. and auto-complete works and it's smart and enjoyable. I can't check at the moment, but I'm almost positive entries like "My Pictures" and "My Music" also go to their correct folders. On my work computers, if I enter "my documents" into the Start Run prompt, I get the following error: "Windows cannot find 'my'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start Button, and then click Search." I can sort of circumvent this by creating a shortcut in my PATH named 'my' that points to My Documents folder, but this doesn't solve the auto-complete option (and it's otherwise imperfect, of course, because "my pictures" or "my music" all direct to the same place. A google search doesn't provide much help on this, although it does identify a poster in 2007 with this same question at another board: http://www.msfn.org/board/lofiversion/index.php/t124813.html (Login required, but Google cache available here: http://preview.tinyurl.com/ygxhwwl) Is this just a limitation of the networks belonging to a domain, or is there some way I can get this functionality back? My documents folder does live in the standard place (C:\Documents and Settings{username}\My Documents), and not on a network drive or anything. It's probably worth adding that the computers are part of some freakish Novell domain thing, too. I'm not in IT here so I'm not too up on the details. Thanks for any help/suggestions!

    Read the article

  • OS X can't copy files from Windows Home Server...over wifi.

    - by John Clayton
    I'm a brand spanking new user of OS X, coming from a lifetime of Windows use. I've been setting up my new Macbook Pro and have run into a very unusual problem. Over wifi, I am unable to copy files to or from my Windows Home Server. The problem seems to exist only over wifi, and only to WHS. Here are the details of my setup: 2010 Macbook Pro (Core i7), OS X 10.6.3 Windows Home Server PP3 (virtualized in XenServer 5.5) Windows 7 Ultimate x64 desktop Windows 7 Ultimate x64 in Boot Camp D-Link DIR-655 wireless N router Here is what I've done to narrow down the problem: Files copy fine from WHS to OS X when using gigabit ethernet Files copy fine from desktop to OS X when using gigabit ethernet Files fail to copy from WHS to OS X when using wifi (error -51) Files copy fine from desktop to OS X when using wifi Files copy fine from WHS to Boot Camp when using wifi Files copy fine from desktop to Boot Camp when using wifi From what I can tell, it seems to be some sort of issue between OS X and WHS, but I can't for the life of me see what would be different between shares on WHS and my desktop. They are both connected using smb://ADDRESS (I've tried both by IP and name). I can browse the shares on the WHS, but copying to OS X fails. I originally found the issue while installing VS2010 off an ISO from WHS, mounted to a Windows 7 VM using VMware Fusion. During the installation the VM was unusable - even the clock got behind the host be about 8 minutes. Once I plugged in the ethernet and disabled the wifi things picked up and finished quickly. The Fusion 3.1 RC is the only I think of that I installed that may have messed with the wifi driver. I've also tried resetting the wifi router, and have changed it from being G & N to N-only. Under Boot Camp I get similar speeds as my wife's N laptop. Any ideas? Thanks!

    Read the article

  • Is there a local client like Gmail?

    - by Clayton Hughes
    I'd love to use something with the Gmail interface for my work (Exchange) e-mails, and I don't exactly carry enough weight to convince the entire company to switch to Google Apps. With that in mind, ss there a local, not-in-the-cloud web client that supports IMAP or POP3 and has the look and feel of Gmail's web interface? (that works on Windows XP).

    Read the article

  • Slow wifi from Windows Server 2003 virtualized in XenServer

    - by John Clayton
    I'm a brand spanking new user of OS X, coming from a lifetime of Windows use. I've been setting up my new Macbook Pro and have run into a very unusual problem. Over wifi, I am unable to copy files to or from my Windows Home Server. The problem seems to exist only over wifi, and only to WHS. Here are the details of my setup: 2010 Macbook Pro (Core i7), OS X 10.6.3 Windows Home Server PP3 (virtualized in XenServer 5.5) Windows 7 Ultimate x64 desktop Windows 7 Ultimate x64 in Boot Camp D-Link DIR-655 wireless N router Here is what I've done to narrow down the problem: Files copy fine from WHS to OS X when using gigabit ethernet Files copy fine from desktop to OS X when using gigabit ethernet Files fail to copy from WHS to OS X when using wifi (error -51) Files copy fine from desktop to OS X when using wifi Files copy fine from WHS to Boot Camp when using wifi Files copy fine from desktop to Boot Camp when using wifi From what I can tell, it seems to be some sort of issue between OS X and WHS, but I can't for the life of me see what would be different between shares on WHS and my desktop. They are both connected using smb://ADDRESS (I've tried both by IP and name). I can browse the shares on the WHS, but copying to OS X fails. I originally found the issue while installing VS2010 off an ISO from WHS, mounted to a Windows 7 VM using VMware Fusion. During the installation the VM was unusable - even the clock got behind the host be about 8 minutes. Once I plugged in the ethernet and disabled the wifi things picked up and finished quickly. The Fusion 3.1 RC is the only I think of that I installed that may have messed with the wifi driver. I've also tried resetting the wifi router, and have changed it from being G & N to N-only. Under Boot Camp I get similar speeds as my wife's N laptop. Any ideas? Thanks! Update: The issue has been further narrowed down to Windows Server 2003, which Windows Home Server is based on, running in XenServer with the XenServer tools installed.

    Read the article

  • Mac OSX Server: svn via ssh command line and encrypted passwords.

    - by Ben Clayton
    Hi all. When I log into our mac mini server running OSX 10.6 via ssh and use svn I get the message: ATTENTION! Your password for authentication realm: can only be stored to disk unencrypted! You are advised to configure your system so that Subversion can store passwords encrypted, if possible. See the documentation for details. You can avoid future appearances of this warning by setting the value of the 'store-plaintext-passwords' option to either 'yes' or 'no' in '/Users/xxxxxxxx/.subversion/servers'. I dont' want to store the password unencrypted though. I've found some details on how to use GNOME keychain in linux to sort this, but nothing on how to use macosx's keychain. Anyone got any ideas? Thanks a lot!

    Read the article

  • Specify Credentials to run Powershell Script to Query AD

    - by Ben
    I want to run a powershell script to query AD from a machine that is NOT on the domain. Basically I want to query to see if there is computer account already on the domain for this machine and create it if there is not. Because this has to happen before the machine joins the domain I assume I will need to specify some credentials to enable it to run. (I'm pretty new to Powershell, so apologies if this is a newbie question!) The script I am using to check the account is below, and then once this has run it will join the domain using the computername specified. Can you tell me how to specify some domain credentials to run this section of the script as? Cheers, Ben $found=$false $thisComputer = <SERVICE TAG FROM BIOS> $ou = [ADSI]"LDAP://OU=My Computer OU,DC=myDomain,DC=com" foreach ($child in $ou.psbase.Children ) { if ($child.ObjectCategory -like '*computer*') { If ($child.Name -eq $thisComputer) { $found=$true } } } If ($found) { <DELETE THE EXISTING ACCOUNT> }

    Read the article

  • What is causing my newly built PC with Windows 7 to BSOD?

    - by Ben S
    I recently built my own PC from parts and installed Windows 7 and I have been getting BSODs with various different stop codes. The latest was 0x24, but I've also had 0xd1 and 0x1e. However, Windows does not let me know where the fault occurred, so I have no idea how to go about resolving this. I know the cause is likely a hardware driver, but I don't know which and cannot find information about how to use the minidumps to troubleshoot my problem. I've uploaded the last three minidumps in case someone can make sense out of them and let me know what could be causing my BSODs. Thanks, Ben

    Read the article

  • Can I port forward to an established reverse ssh tunnel

    - by Ben Holness
    I have three computers, A, B and C A has initiated a reverse ssh tunnel to B: ssh -nTNx -p 443 -R 22222:localhost:22 [user]@[server] If I log in to B, I can use 'ssh -p 22222 localhost' and I get a login prompt for A. If I try 'ssh -p 22222 [public IP of B]', it doesn't work What I would like to be able to do is have C connect to A without needing to login to B. So from C I could 'ssh -p 22222 [public IP of B]' and I would get the login prompt for A. I am using debian and shorewall and I have a basic understanding of how things work. I have tried various combinations of REDIRECT and DNAT rules, but haven't had any luck. I have tried using the same port (22222) and a different port (forwarding 22223 from C to 22222 on localhost). Any ideas? Cheers, Ben

    Read the article

  • Why is the "Standard Account" option disabled (grayed-out)

    - by Clayton Hughes
    I just installed Win7 64bit on a new hard drive, and I created a user account through the OOBE. I want to make my user account a standard user. However, if I go into "User Accounts" and select "Change my account type", the standard user option is greyed out--this account apparently has to be an administrator. I thought maybe it was the only admin account on the machine, so I tried to create a new user account named "Administrator", but was told I couldn't, because one already exists. What gives? What do I have to do to run as a standard user?

    Read the article

  • Exchange 2013 Virtual Machine: Backup just mailboxes and clear logs

    - by Ben Curtis
    I have a Windows Server 2012 machine running Exchange 2013 running as a KVM virtual machine. For my VM guests, I do full image based backups from the host, so that I can quickly restore to any host server simply by copying over the disk image files. This means I don't need a nightly full system backup. That being said, without running a VSS Full Backup, the Exchange logs get massive (Specifically, the performance logs which are 500MB a day). In addition, I would also like to have a nightly backup of just the mail database. What is the best way to accomplish this? A full backup of the C:\Program Files\Microsoft\Exchange Server\V15 folder as I found in one tutorial did not clear out the logs. Thanks, Ben

    Read the article

  • Can I run AD commands from a standard PowerShell script?

    - by Ben
    I am putting together a script to run post-sysprep. It should check if the machine is on the network, and if it is then it should query AD to see if a computer account exists with it's service tag (we're using these as the hostnames of the machines.) If it does exist, it should delete the account and rejoin the machine to the domain. I have got the majority of the script running, but need to run the following: Remove-ADComputer -Identity $distinguishedName How can I run this from the "standard" powershell environment? I don't want to use the AD module. (By the way - I'm on a mixed mode 2000/03 domain as we are in the process of upgrading to 2008) I'm new to PowerShell so be gentle if I'm completely missing the point! Thanks, Ben

    Read the article

  • Best way to script checking whether a machine is on the corporate network

    - by Ben
    I am writing a Powershell script to determine if a machine is on the corporate network. The machine may or may not be on the domain, so I want to check at "IP" level. Have written something to check by pinging a couple of servers on a couple of different subnets (to get around the risk of someone being on another (external) subnet with a host on the same IP.) Works, but it's a bit slow, and not especially "future-proof" - e.g. in 2 years time when I decomission the server it'll break. Is there a way I can use the dns suffix being given by the local dhcp server? Just direct me what I need to check - I can figure out the script. Ta, Ben

    Read the article

  • iPhone SDK Zoom and refresh PDF with Quartz

    - by Ben
    Looking at the QuartzDemo sample application, I love the speed of the PDF rending using quartz alone (that is, without using uiwebview). However, when I'm zooming in the PDF it doesn't seem to become more clear like it does in PDF view. Is there something that I can change to have the same effect when zooming in and out using multitouch? like manipulate the PDF transformation matrix or something? Thanks a bunch. --Ben

    Read the article

  • PyGTK: Packing widgets before tabs in a gtk.Notebook

    - by Ben Ashton
    Basically, what I want to do is put some buttons before the tabs in a gtk.Notebook. I tried making my own notebook type widget and it worked well, but it would have required lots more work to make it as flexible as I would like, also it wasn't as efficient. Here is a mock-up of what I'm trying to achieve: http://imagebin.ca/view/84SC0d.html Any ideas would be much appreciated, thanks. Ben.

    Read the article

  • How to escape trailing backslash in NVelocity

    - by Ben
    I am using NVelocity to process various PowerShell scripts before they are executed against a server. My question is how to escape a backslash trailing a variable: e.g. ls \\$computername\c$ $computername should be replaced with a valid computer name at runtime, but the trailing backslash (\c$) means that it does not. Thanks Ben

    Read the article

  • ASP.NET MVC Render View to String

    - by Ben
    I'm currently using NVelocity to render some email templates. I'm curious how I can do this with the standard ASP.NET MVC view engine i.e. render a view as a string. Basically I want to pass get the string result of a model binded view and pass this to iTextSharp to generate a PDF. Thanks. Ben

    Read the article

  • Core Data: NSFetchRequest sorting by count of to-many relationship

    - by Ben Reeves
    Say I have an parent entity, each of which have a number of children. I want to get all the parents sorted by their number of children. Something similar to the following pseudo code: NSEntityDescription * entity = [NSEntityDescription entityForName:@"Parent" inManagedObjectContext:managedObjectContext]; [[NSSortDescriptor alloc] initWithKey:@"children.count" ascending:NO]; //Execute request Is there a way construct a fetch like this using core data? Thanks, Ben

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >