Search Results

Search found 14770 results on 591 pages for 'bootable usb drive'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 3/591 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • My Portable Hard Drive with USB3 didn't work when connected to My Laptop, but it working with USB2 properly

    - by Mohammad Hasan Esfahanian
    I have Western Digital My Passport Essential Portable Hard Drive with USB3 and Model:WDBACY5000ABK-EESN. Until about two or three months ago when I connected that to My Laptop USB3 port, that worked very well. But now when I'm connecting that to My device, The system does not detect any Hard Drives. When plug in the USB2 port is working properly. I connected that to another Laptop whit USB3 port but I had the same problem. I tested My Laptop port with a Flash Memory by USB3 and ports were healthy and I'm sure they are working. For this issue, I changed the windows, but it still did not work. What can I do? Thanks in advance.

    Read the article

  • Multiple LiveCD iso's on a single USB drive

    - by Keck
    I am looking to create a USB flash drive that I can put multiple LiveCD iso's on and select which boots from startup. The ideal candidate supports linux and windows based iso's, and is relatively simple. It also must have some reasonable process for adding and removing iso from the drive/list. Things that I'm not looking for this specific question: UBCD or other swiss-army knife livecd's. The point is to boot any one of multiple CD's, not to boot a (certainly useful) utility CD. Installing a single LiveCD to a USB drive. I'd like to have multiple iso images, selectable at startup. I don't have a specific purpose in mind, possibilties include a single drive with a knoppix variant, ubuntu desktop, UBCD for dos, UBCD4Win, the Offline NT Password Cracker, etc. Flexible and easy to use are the name of the game!

    Read the article

  • USB drives not recognized all of a sudden (module usb_storage not loading)

    - by Siddharth
    I am very close to the solution, just need to know how to get usb-storage to load I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

    Read the article

  • Problems in detecting pen drive

    - by Mzk
    First of all, I don't have an issue with detecting my pen drive on 32-bit ubuntu 12.04. It can detect my pen drive very fast when plug in. Then, I bought a laptop installed with windows 7 64-bit operating system. I have decided to installed ubuntu alongside with win7. To be precise, I installed uBuntu 12.04.3 64-bit. It appears that every time I plug in my pen drive, it is either very slow automatically mount. It is even worst that the pen drive won't mount when plug in to usb 3.0 port. Anyone? UPDATE: My laptop can detect pen drive now either 3.0 or 2.0 port. The question is why the pen drive very slow shows up?

    Read the article

  • Need help making a bootable portable USB hard drive. [Utility I need will only create bootable CDs or USB flash drives]

    - by Sootah
    I've got a copy of Spotmau's Bootsuite 2012, which is an utterly fantastic tool. It has completely replaced Bart PE for me, and I relied on BPE for YEARS. Anyway, the issue I'm having is that the Bootsuite installer utility will only create bootable USB flash drives, or bootable CDs. The USB hard drive is detected as a hard drive instead of as a USB device, and as such I cannot use the included app to install to the USB HDD. Is there a way of either copying the files from a bootable flash drive to a USB HDD and making that work, or of taking an .ISO of the bootable CD and using that to make the portable HD bootable? The flash drives I've made of it are great as I can always have it with me [have 16GB dangling from my keychain. :) ], but my USB hard drive is FAR faster than any flash drive I have, so I'd like to be able to use that when I'm working out of my office or happen to have it with me.

    Read the article

  • `power/persist` file not found in USB device sysfs directory

    - by intuited
    The file /usr/share/doc/linux-doc/usb/persist.txt.gz mentions that the USB-persist capability can be enabled for a given USB device by writing 1 to the file persist in that device's directory in /sys/bus/usb/devices/$device/power. This is said — if I understood correctly — to allow mountings of volumes on the drive to persist across power loss during suspend. However, I've discovered that the device I'd like to enable this facility for — a USB hard drive — does not have such a file in its corresponding directory, and that attempts to create it are rebuffed. Is there perhaps a kernel module that needs to be loaded for this to work? Do I need to build a custom kernel? I'm running ubuntu 10.10.

    Read the article

  • Pendrive USB Ubuntu installation - black screen on boot

    - by ubuntico
    I see many posts on this, but no solution. I installed Ubuntu 12.04 on my 16GB USB flash drive using this official link using their tool Universal USB Installer. Installation to USB went fine so I set my laptop to boot from USB and the Ubuntu was recognized. I saw the usual boot screen and I chose option "Run Ubuntu from this USB". The boot process started and after 5-6 seconds the screen goes black and non-responsive. I thought that it hang on X loading so I tried switching to console via Ctrl+Alt+F1-6 but the system did not respond. Why is this happening? Am I doing something wrong? PS. My laptop is HP Pavillion G6

    Read the article

  • USB blocks suspend on a Gigabyte GA-890GPA-UD3H with ATI SB700/SB800

    - by poolie
    Following on from question 12397, I'd still like to get suspend working on my Phenom II X6 / GA-890GPA desktop machine running current Maverick. When I run pmi action suspend the machine doesn't crash, but it also doesn't suspend. The kernel logs show: PM: Syncing filesystems ... done. PM: Preparing system for mem sleep Freezing user space processes ... (elapsed 0.02 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. PM: Entering mem sleep Suspending console(s) (use no_console_suspend to debug) pm_op(): usb_dev_suspend+0x0/0x20 returns -2 PM: Device usb8 failed to suspend async: error -2 PM: Some devices failed to suspend PM: resume of devices complete after 0.430 msecs PM: resume devices took 0.000 seconds PM: Finishing wakeup. Restarting tasks ... done. PM: Syncing filesystems ... I've tried disconnecting all the USB devices, and then connecting in to run pmi over ssh, and I get the same failure. With everything unplugged, I see the following usb devices: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub and lspci shows the physical devices are: 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 02:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) Booting with no_console_suspend makes no difference.

    Read the article

  • Unstable after moving headless server from usb-hdd to usb pendrive

    - by nlee
    Ubuntu server 12.04.1 running from usb-hdd is rock solid for months. After copying the partitions to a Kingston usb pendrive the system will only run for 3-4 days before some services fail. Is running 12.04.1 from usb pendrive a viable approach? How do I troubleshoot the problem? In the meanwhile, I have reverted back to usb-hdd. Willing to buy a usb pendrive that is known to work. Recommendations?

    Read the article

  • Connecting 2 PCs using USB-to-USB (male-male) cable

    - by Amirizzuan
    I found this while Googling around: http://www.hardwaresecrets.com/article/Connecting-Two-PCs-Using-a-USB-USB-Cable/248 But then, the solution given in the article is using Windows. Is there any Ubuntu equivalent to this? I would really love to SSH into my Ubuntu server via my Ubuntu laptop, just by connecting one end of the male USB to my laptop, and another end of the male USB to my server. I know I can always SSH into my server via the network, but then in this case of mine, there are cases the server is inside a secluded-secured network server room, and the only way for me to check things out is to go into the server room and open the keyboard console and monitor there. But, if I can just bring my laptop inside and connect to the USB there, then that would be cool. Any idea guys?

    Read the article

  • USB 3.0 hard disk not detected on a particular host controller?

    - by Alvin Wong
    I have a USB 3.0 hard disk which has always been working on my desktop with an XHCI. Now I just bought a notebook with an XHCI (something with Intel's Ivy Bridge setup). The first time I plug the hard disk in its 3.0 port it is detected and working. A few hours later I try to connect it again, but seems that the notebook just ignored it! The light on the hard disk didn't blink as usual (instead it is hold at on). I then tested it with my desktop again and it is working perfectly. It gets trickier when I plug it in the USB 2.0 port of that notebook it is detected and working perfectly (despite the slower speed). Then I try to plug in an USB 2.0 USB flash drive to that USB 3.0 port, and it is detected (of course as USB 2.0). So, there are two USB 3.0 ports on my notebook's XHCI. Both of them are not working with my hard disk but working perfectly fine with my USB 2.0 UFD. What's wrong with it? When I plug in the hard disk, device manager doesn't change. I've tried re-installing the driver for the XHCI, but it changes nothing. Had I broke the USB 3.0-specific pins of both USB 3.0 ports?

    Read the article

  • USB drives not recognized all of a sudden (usb_storage not loaded lsmod does not report usb_storage)

    - by Siddharth
    I have tried most of the advice on askubuntu and other sites, usb_storage enable to fdisk -l. But I am unable to find steps to get it working again. sudo lsusb results Bus.... skipped 4 lines Bus 004 Device 002: ID 413c:3012 Dell Computer Corp. Optical Wheel Mouse Bus 005 Device 002: ID 413c:2105 Dell Computer Corp. Model L100 Keyboard Bus 001 Device 005: ID 8564:1000 sudo dmseg | tail reports [ 69.567948] usb 1-4: USB disconnect, device number 4 [ 74.084041] usb 1-6: new high-speed USB device number 5 using ehci_hcd [ 74.240484] Initializing USB Mass Storage driver... [ 74.256033] scsi5 : usb-storage 1-6:1.0 [ 74.256145] usbcore: registered new interface driver usb-storage [ 74.256147] USB Mass Storage support registered. [ 74.257290] usbcore: deregistering interface driver usb-storage fdisk -l reports Device Boot Start End Blocks Id System /dev/sda1 * 2048 972656639 486327296 83 Linux /dev/sda2 972658686 976771071 2056193 5 Extended /dev/sda5 972658688 976771071 2056192 82 Linux swap / Solaris I think I need steps to install and get usb_storage module working. Edit : I tried sudo modprobe -v usb-storage reports sudo modprobe -v usb-storage insmod /lib/modules/3.2.0-48-generic-pae/kernel/drivers/usb/storage/usb-storage.ko Edit : jsiddharth@siddharth-desktop:~$ sudo udevadm monitor --udev monitor will print the received events for: UDEV - the event which udev sends out after rule processing UDEV [4757.144372] add /module/usb_storage (module) UDEV [4757.146558] remove /module/usb_storage (module) UDEV [4757.148707] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6 (usb) UDEV [4757.149699] add /bus/usb/drivers/usb-storage (drivers) UDEV [4757.151214] remove /bus/usb/drivers/usb-storage (drivers) UDEV [4757.156873] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0 (usb) UDEV [4757.160903] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) UDEV [4757.164672] add /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165163] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9/scsi_host/host9 (scsi_host) UDEV [4757.165440] remove /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/host9 (scsi) Narrowing down more : Seems like I need usb_storage to load as a module jsiddharth@siddharth-desktop:~$ lsmod | grep usb usbserial 37201 0 usbhid 41937 0 hid 77428 1 usbhid Still no usb driver mounted. Nor does a device show up in /dev. Any step by step process to debug and fix this will be really helpful.

    Read the article

  • Can't access USB drive anymore

    - by marie
    I have a 32 GB Lacie Cookey USB flash disk that doesn't show in the Computer window but it's visible as a device. cmd > diskpart DISKPART> list disk Disk ### Status Size -------- ------------- ------ Disk 0 Online 149 G Disk 1 No Media 0 DISKPART> select disk 1 Disk 1 is now the selected disk. DISKPART> clean Virtual Disk Service error: There is no media in the device. It also appears in the Disk Management tool, but the box is empty. Is there anything I can do or is it dead? ............................................................ output from ChipGenius: Description: [F:]USB Mass Storage Device(LaCie CooKey) Device Type: Mass Storage Device Protocal Version: USB 2.00 Current Speed: High Speed Max Current: 200mA USB Device ID: VID = 059F PID = 103B Serial Number: 070535924B170C18 Device Vendor: LaCie Device Name: CooKey Device Revision: 0100 Manufacturer: LaCie Product Model: CooKey Product Revision: PMAP Controller Vendor: Phison Controller Part-Number: PS2251-67(PS2267) - F/W 06.08.53 [2012-09-26] Flash ID code: 983AA892 - Toshiba [TLC] Tools on web: http://dl.mydigit.net/special/up/phison.html

    Read the article

  • USB-to-Parallel adapter rated as USB 1.1 - will its driver lower speed of USB 2.0 bus?

    - by cumminjm
    I need to connect a printer with a parallel port to a computer with only a USB 2.0 bus. I'd like to do so without lowering the USB 2.0 bus speed to USB 1.1. All the USB-to-Parallel adapter cable found so far seem to be rated as USB 1.1 and they come with a CD which presumably contains a necessary driver. I haven't purchased one and tested it out yet, but if so, would the cable's driver lower speed of USB 2.0 bus?

    Read the article

  • USB Hub vs. Dockinstation USB vs. Laptop USB

    - by Will
    I recently had thougts about my current setup in my office, especially about the UBS ports distribution. Here's my setup: I have a Lenovo T410 docked to a Lenovo Dockingstation Series 3, that providey me with 6 USB ports, which I use all (3 ext. drives, mouse, keyboard, USB Hub of monitor). The USB hub on my ext. monitor (most probably powered by the ext. monitor's power supply) provides me with 2 USB ports, where I use one for my webcam and another for USB sticks. On my T410 itself I have 4 USB slots, that are usually not used, as don't want to mess with USB plugs when undocking my laptop, now and then I plug my printer on one of these, just because I don't have any UBS ports left. Now I'm wondering how fast each of these slots are: I assume that all the 6 USB ports from the dockinstation somehow go through the docking connector on the bottom of my laptop. Does this connector has such a big bandwidth for all these 6 USB ports to perform like if they were dedicated ports as the 4 ones on my laptop? Also how is generally the performance of USB hubs (like the one on my ext. monitor?)?

    Read the article

  • external hard drive not detected after ubuntu crash [restarting machine]

    - by Netmoon
    today i tried to watch movie [with vlc media player] from my external hard drive [expansion portable 500 GB], and it's play good, then pause the movie and play it again, and my Ubuntu crashed! [Ubuntu 12.04]i had to restart the machine, so did it, but after that Ubuntu can't recognize this hard drive! i changed USB cable but it was not effective. this is my dmesg command result : [ 191.281630] usb 2-1.3: new full-speed USB device number 9 using ehci_hcd [ 191.353527] usb 2-1.3: device descriptor read/64, error -32 [ 191.529115] usb 2-1.3: device descriptor read/64, error -32 [ 191.704669] usb 2-1.3: new full-speed USB device number 10 using ehci_hcd [ 191.776524] usb 2-1.3: device descriptor read/64, error -32 [ 191.952202] usb 2-1.3: device descriptor read/64, error -32 [ 192.127772] usb 2-1.3: new full-speed USB device number 11 using ehci_hcd [ 192.534742] usb 2-1.3: device not accepting address 11, error -32 [ 192.606749] usb 2-1.3: new full-speed USB device number 12 using ehci_hcd [ 193.013696] usb 2-1.3: device not accepting address 12, error -32 [ 193.013906] hub 2-1:1.0: unable to enumerate USB device on port 3 note: I am able to hear the sound of the external drive lens. When attach hard drive to usb port, the status light goes on, but it's low bright and i think its power is low! try to mount in Microsoft Windows 7, but nothing happened.

    Read the article

  • Unable to recognize hard drive after replacing a drive

    - by Peter Schriver
    I have a Poweredge 830 that I had been using with 1 OS Sata drive and 3 data drives. One of the drives had some failing sectors so I replaced it with a different drive. For some bizarre reason the computer would not reboot so I disconnected all of the media drives and did a clean reinstall on the OS drive. Only the boot drive and one of the media drives are now recognized by my Bios. Drive 0 and 2. Drive 1 and 3 are listed in the Bios as "Unkown Device" Any help would be appreciated I think there may be something wrong with the install. For some reason when I attempt to change the display it says I have a laptop.If you think a reinstall is in order I will try that.

    Read the article

  • linux: mount old ATA disk to USB adapter

    - by 130490868091234
    I am trying to recover data from an old Linux that was installed in a computer on an ATA hard drive. I found a ScanLogic Corp. SL11R-IDE IDE Bridge (04ce:0002), an ATA adapter to USB 1.0 like the one in the picture: and after switching it on, I plugged it into a laptop with Ubuntu 12.04. I am used to the drives being automatically mounted, but this one doesn't show up in /media. After doing a dmesg, all I got is this: [215298.671924] usb 2-1.1: new full-speed USB device number 5 using ehci_hcd [215298.767330] scsi19 : usb-storage 2-1.1:1.0 [215299.841701] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.017258] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.197050] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd [215300.372730] usb 2-1.1: reset full-speed USB device number 5 using ehci_hcd I tried plugging in the adapter to the three different USB ports in my laptop (one of them USB 3.0), but got no luck with any of them. I get different devices under, for example: /dev/bus/usb/003/002 or /dev/bus/usb/002/004, but I don't get any /dev/sdbN links. The output blkid -o list -c /dev/null is just the laptop's partitions. I have tried taking out the jumper, putting it as master and as CS Enabled, but didn't change the result. Any ideas?

    Read the article

  • Backup folder on sometimes attached external usb harddrive

    - by ctrler
    My girlfriend no longer has space her laptops drive to store her photos. The drive she has now is 750GB, so to go to a bigger drive would be expensive, as there isn't many 1.5tb 2.5 inch 9.5mm hdd on the market (as of now, there is only one). Because of that, I am thinking of moving her pictures to a cheap external usb hdd. As of now, I'm automatically backing up her important folders (My Documents, Pictures, etc.) using Windows 7 default backup software to a network drive. My problem is that I don't know of a good solution to automatically backup a folder residing on an usb disk. The usb disk won't be attached to the computer all the time, so I can't just treat it as a normal backup folder. Sometimes the backup would run and the folder would not be there! Anyone knows any software or methodology to backup folders on external usb hard drives that are not always present? Thanks

    Read the article

  • usb ntfs pen drive and hard drive not working after connection to ubuntu

    - by lemon619
    as said in the title first of all i connected a usb key (ntfs formatted) with data in it, on ubuntu 12.04, after i disconnected it i was no more able to access the usb key neither from windows nor from ubuntu 12.04. The system asks me to format my usb key Just now i connected a hard drive ntfs formatted with data in it to ubuntu 12.04. I ejected correctly the hard drive and connected it to windows, and the system asks me to format my hard drive? same as the usb key Can someone help me please ? Would really appreciate!

    Read the article

  • System does not detect USB pendrives

    - by cshubhamrao
    This USB thing is driving me crazy. 2 problems in time span of 3 hours. Ok I was already trying to cope up with "wrong fs type, bad option, bad superblock" error while mounting FAT Drives when to my amazement I discovered that none of the USB Storage devices showed up in the system Useful outputs: - tail /var/log/syslog: root@shubham-pc:~# tail /var/log/syslog Nov 7 21:41:47 shubham-pc colord: device removed: sysfs-HP-v250w Nov 7 21:41:51 shubham-pc kernel: [ 3441.529542] usb 1-1: USB disconnect, device number 11 Nov 7 21:41:53 shubham-pc kernel: [ 3443.820029] usb 1-2: new high-speed USB device number 14 using ehci-pci Nov 7 21:41:54 shubham-pc kernel: [ 3443.952897] usb 1-2: New USB device found, idVendor=0781, idProduct=5530 Nov 7 21:41:54 shubham-pc kernel: [ 3443.952905] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 7 21:41:54 shubham-pc kernel: [ 3443.952909] usb 1-2: Product: Cruzer Nov 7 21:41:54 shubham-pc kernel: [ 3443.952913] usb 1-2: Manufacturer: SanDisk Nov 7 21:41:54 shubham-pc kernel: [ 3443.952917] usb 1-2: SerialNumber: 20060876420EC6016847 Nov 7 21:41:54 shubham-pc mtp-probe: checking bus 1, device 14: "/sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2" Nov 7 21:41:54 shubham-pc mtp-probe: bus: 1, device: 14 was not an MTP device

    Read the article

  • Remove Write Protection from USB

    - by Vasile Marian Falama?
    My flash USB is write protected and I've tried every possible methods I've encountered over the internet, to get rid of this. Accessing the usb is not working. Format from my computer, is not working. Clear attributes with DiskPart is not working (can't be cleaned, Current Read-only State is Yes but Readonly is set to false... With Disk Management, I can't delete the partition... Is there any other method... With a specific software or somehow? Edit : I tried this on Windows 8.1.

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >