Search Results

Search found 260 results on 11 pages for 'brent parker'.

Page 3/11 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11  | Next Page >

• Which Linux distribution for vehicle LCD instrument panel

  - by Brent

  I will be designing an instrument panel for a vehicle to display the common gauges that you would find in a car - (speedometer, rpm, fuel level, oil pressure, etc.). We have selected a 7" LCD and are in the process of narrowing down the hardware (This will use an ARM processor). The idea is to read these values off of the CAN Bus and update the UI with those values. This needs to have a fairly quick boot time, 5-10 seconds would be acceptable from the time the ignigtion is turned on to the time the UI is running. I have been doing a lot of research on which linux distribution to use, but I wanted to ask the question here to get the community's suggestions. I have been a .NET programmer for years, so linux is a new world to me. Here is what I have found so far... Tizen is geared for In-Vehicle Infotainment (IVI) (plus some others). However, this project is not an IVI, and I do not need the phone dialer, navigation, etc. Meego is dead, and Tizen seems to be the replacement Angstrom, Debian... would either of these be useful? I am not tied to a particular programming language or IDE. Any help and direction is appreciated!

  Read the article

• server will not reply (syn -ack)

  - by Brent

  I like to use the following commands to manage 'TIME_WAIT', in the hope to free up resources. echo 20 > /proc/sys/net/ipv4/tcp_fin_timeout sysctl -w net.ipv4.tcp_tw_reuse=1 sysctl -w net.ipv4.tcp_tw_recycle=1 I found something interesting while doing a tcpdump. Sometimes if a client makes a connection (syn), the server will not reply (syn -ack). My question is, could it be because of the top three commands.

  Read the article

• Recommended apps for new desktop machine install?

  - by Eddie Parker

  I'm hoping to harness the collective tips of superuser to gather recommended apps/configurations to keep a new desktop clean, virus free, and hopefully lower software rot. I ask because I've recently come across tools like dropbox, deepfreeze, returnil, etc, and I'm curious what other ones are out there to protect a new box. I personally am interested in Windows, but feel free to comment on whatever OS you'd like, freeware or otherwise. Ideally specify the price/OS in your answer(s).

  Read the article

• Starting/Stopping IBM WebSphere Application Server (WAS) 7 from the Command Line

  - by Christopher Parker

  I've written a script to automate the process of starting, stopping, and restarting WAS7 from the command line. Nothing starts automatically on one of our staging servers, so I have to start everything: deployment manager, node agent, app server, and Web server. The script I wrote seems to work pretty well. A coworker of mine recommended that I structure my commands differently. I'm wondering if there's a good, valid reason for doing so. First, my variables: WAS_HOME="/opt/IBM/WebSphere/AppServer" WAS_PROFILE_NAME="AppSrv01" WAS_APP_SERVER="server1" WAS_WEB_SERVER="webserver1" How I had the start commands: "${WAS_HOME}/bin/startManager.sh" "${WAS_HOME}/bin/startNode.sh" -profileName $WAS_PROFILE_NAME "${WAS_HOME}/bin/startServer.sh" -profileName $WAS_PROFILE_NAME $WAS_APP_SERVER "${WAS_HOME}/bin/startServer.sh" -profileName $WAS_PROFILE_NAME $WAS_WEB_SERVER I was told that I should do it like this, instead: WAS_DMGR="Dmgr01" # Added variable "${WAS_HOME}/profiles/${WAS_PROFILE_NAME}/bin/startNode.sh" "${WAS_HOME}/profiles/${WAS_DMGR}/bin/startManager.sh" "${WAS_HOME}/profiles/${WAS_PROFILE_NAME}/bin/startServer.sh" $WAS_APP_SERVER "${WAS_HOME}/profiles/${WAS_PROFILE_NAME}/bin/startServer.sh" $WAS_WEB_SERVER How is the second way of starting up everything for WebSphere any better or more correct than the first, original, way?

  Read the article

• Varnish configuration, NamevirtualHosts, and IP Forwarding

  - by Brent

  I currently have a bunch of NameVirtualHost based websites, load balanced between 3 apache2 servers using ldirectord. I would like to insert varnish as a reverse-web-proxy between ldirectord and apache in the following way: a request comes in to ldirectord it is then load balanced between the 3 apache2 servers and varnish, with a weight of 1 for the webservers, and 99 for varnish (so if varnish is rebooted, the webservers will take over seamlessly) varnish will then load balance its requests between my apache2 servers. However, the varnish part is not working. I wonder whether this has to do with the fact that my apache servers use x.x.x.x:80 for their NameVirtualHosts, instead of *:80? (they have to do this, since each server hosts multiple IP addresses) Or perhaps it has to do with the need for IP Forwarding to be set up on the varnish server? (I did echo 1 /proc/sys/net/ipv4/ip_forward on this server, is that sufficient?) How can I debug this problem? ldirectord doesn't produce logs of what it does with each request (and if it did, I would be overwhelmed with information since I'm serving hundreds of requests per second) varnish log shows the ldirectord server connecting to it every 5 seconds, but nothing else. I have set up a test site using this configuration, but it fails - no apache access logs, no applicable varnish logs.

  Read the article

• Avoid linux out-of-memory application teardown

  - by Eddie Parker

  I'm finding that on occasion my Linux box runs out of memory and it starts tearing down random processes to deal with it. I'm curious what administrators do to avoid this? Is the only real solution to up the amount of memory (will upping the swap alone help?), or is there better ways to set up the box with software to avoid this? (i.e., quotas, or some such?). I'd appreciate some feedback. Cheers, -e-

  Read the article

• Routing for Two Hosts Behind a IPSec Tunnel

  - by Brent

  Network A 10.110.15.0/24 Firewall is .1 Host A is .2 Network B 10.110.16.0/24 Firewall is .1 Host B is .2 Two Cisco ASA's. IPSec tunnel with a crypo map that secures 10.110.15.0/24 <- 10.110.16.0/24. Let's say two hosts, 10.110.15.2 and 10.110.16.2 need to talk to each other. Normally I have to enter a persistent static route on a each host along the lines of: route add 10.110.16.0 mask 255.255.255.0 10.110.15.1 metric 1 -p (on the "A" box) I also have to enter another persistent static route on the .16 host in order for the traffic to know how to get back to the .15 network. Note that the default for each machine IS the firewall, so .1. I have no problem adding persistent routes on Windows/ESX/*nux machines but what about a smart switch in the .16 network that I want to manage from the .15 network. Do I need to run a routing protocol? Do I need to have Reverse Route Injection enabled on both ends of the IPSec tunnel? Should I add a route on the firewall? If so, how do you formulate it? Does it get a metric of 1 and my default route 0.0.0.0 get a metric of 2?

  Read the article

• MongoDB Crashed,Not able to start it again

  - by Kevin Parker

  Mongodb fail to start after showing this error...and not able to start it again..?Can u help me find out? *** glibc detected *** /usr/lib/mongodb/mongo: corrupted double-linked list: 0x000000000f750b50 *** Mon Nov 26 19:01:29 mongo got signal 11 (Segmentation fault), stack trace: ======= Backtrace: ========= /lib/x86_64-linux-gnu/libc.so.6(+0x788d6)[0x2b2db94198d6] /lib/x86_64-linux-gnu/libc.so.6(+0x7a841)[0x2b2db941b841] /lib/x86_64-linux-gnu/libc.so.6(cfree+0x73)[0x2b2db941f603] /usr/lib/mongodb/mongo(_ZN5boost6detail17sp_counted_impl_pIN5mongo7BSONObj6HolderEE7disposeEv+0x12)[0x45bd92] /usr/lib/mongodb/mongo(_ZN5boost6detail12shared_countD2Ev+0x49)[0x45d319] /lib/x86_64-linux-gnu/libc.so.6(exit+0xe1)[0x2b2db93da961] /usr/lib/mongodb/mongo(_Z10quitNicelyi+0x53)[0x458043] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfc60)[0x2b2db753fc60] /lib/x86_64-linux-gnu/libc.so.6(kill+0x7)[0x2b2db93d4fe7] /lib/libreadline.so.6(+0x25888)[0x2b2db889b888] /lib/libreadline.so.6(rl_getc+0x5e)[0x2b2db889d9de] /lib/libreadline.so.6(rl_read_key+0xf8)[0x2b2db889e0c8] /lib/libreadline.so.6(readline_internal_char+0x61)[0x2b2db8889061] /lib/libreadline.so.6(readline+0x55)[0x2b2db88895b5] /usr/lib/mongodb/mongo(_Z13shellReadlinePKci+0x8a)[0x45694a] /usr/lib/mongodb/mongo(_Z5_mainiPPc+0x1506)[0x45a1a6] /usr/lib/mongodb/mongo(main+0x26)[0x45b1d6] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xff)[0x2b2db93bfeff] /usr/lib/mongodb/mongo[0x456449] ======= Memory map: ======== 00400000-0055c000 r-xp 00000000 fd:03 32385496 /usr/lib/mongodb/mongo 0075c000-00762000 r--p 0015c000 fd:03 32385496 /usr/lib/mongodb/mongo 00762000-00765000 rw-p 00162000 fd:03 32385496 /usr/lib/mongodb/mongo 00765000-00767000 rw-p 00765000 00:00 0 0f74e000-0f961000 rw-p 0f74e000 00:00 0 [heap] 2b2db730d000-2b2db732e000 r-xp 00000000 fd:03 32112840 /lib/x86_64-linux-gnu/ld-2.13.so 2b2db732e000-2b2db7331000 rw-p 2b2db732e000 00:00 0 2b2db7331000-2b2db7351000 rwxp 2b2db7331000 00:00 0 2b2db752d000-2b2db752e000 r--p 00020000 fd:03 32112840 /lib/x86_64-linux-gnu/ld-2.13.so 2b2db752e000-2b2db7530000 rw-p 00021000 fd:03 32112840 /lib/x86_64-linux-gnu/ld-2.13.so 2b2db7530000-2b2db7548000 r-xp 00000000 fd:03 32112843 /lib/x86_64-linux-gnu/libpthread-2.13.so 2b2db7548000-2b2db7748000 ---p 00018000 fd:03 32112843 /lib/x86_64-linux-gnu/libpthread-2.13.so 2b2db7748000-2b2db7749000 r--p 00018000 fd:03 32112843 /lib/x86_64-linux-gnu/libpthread-2.13.so 2b2db7749000-2b2db774a000 rw-p 00019000 fd:03 32112843 /lib/x86_64-linux-gnu/libpthread-2.13.so 2b2db774a000-2b2db774e000 rw-p 2b2db774a000 00:00 0 2b2db774e000-2b2db7836000 r-xp 00000000 fd:03 32380634 /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.14 2b2db7836000-2b2db7a35000 ---p 000e8000 fd:03 32380634 /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.14 2b2db7a35000-2b2db7a3d000 r--p 000e7000 fd:03 32380634 /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.14 2b2db7a3d000-2b2db7a3f000 rw-p 000ef000 fd:03 32380634 /usr/lib/x86_64-linux-gnu/libstdc++.so.6.0.14 2b2db7a3f000-2b2db7a55000 rw-p 2b2db7a3f000 00:00 0 2b2db7a55000-2b2db7a58000 r-xp 00000000 fd:03 32244866 /usr/lib/libboost_system.so.1.42.0 2b2db7a58000-2b2db7c57000 ---p 00003000 fd:03 32244866 /usr/lib/libboost_system.so.1.42.0 2b2db7c57000-2b2db7c58000 r--p 00002000 fd:03 32244866 /usr/lib/libboost_system.so.1.42.0 2b2db7c58000-2b2db7c59000 rw-p 00003000 fd:03 32244866 /usr/lib/libboost_system.so.1.42.0 2b2db7c59000-2b2db7c6d000 r-xp 00000000 fd:03 32244882 /usr/lib/libboost_thread.so.1.42.0 2b2db7c6d000-2b2db7e6c000 ---p 00014000 fd:03 32244882 /usr/lib/libboost_thread.so.1.42.0 2b2db7e6c000-2b2db7e6e000 r--p 00013000 fd:03 32244882 /usr/lib/libboost_thread.so.1.42.0 2b2db7e6e000-2b2db7e6f000 rw-p 00015000 fd:03 32244882 /usr/lib/libboost_thread.so.1.42.0 2b2db7e6f000-2b2db7e83000 r-xp 00000000 fd:03 32244880 /usr/lib/libboost_filesystem.so.1.42.0 2b2db7e83000-2b2db8082000 ---p 00014000 fd:03 32244880 Mon Nov 26 19:01:29 mongo got signal 6 (Aborted), stack trace: Mon Nov 26 19:01:29 0x45e03f 0x457694 0x2b2db93d4d80 0x2b2db93d4d05 0x2b2db93d8ab6 0x2b2db940fa9b 0x2b2db94198d6 0x2b2db941b841 0x2b2db941f603 0x45bd92 0x45d319 0x2b2db93da961 0x458043 0x2b2db753fc60 0x2b2db93d4fe7 0x2b2db889b888 0x2b2db889d9de 0x2b2db889e0c8 0x2b2db8889061 0x2b2db88895b5 /usr/lib/mongodb/mongo(_ZN5mongo15printStackTraceERSo+0x1f) [0x45e03f] /usr/lib/mongodb/mongo(_Z12quitAbruptlyi+0x324) [0x457694] /lib/x86_64-linux-gnu/libc.so.6(+0x33d80) [0x2b2db93d4d80] /lib/x86_64-linux-gnu/libc.so.6(gsignal+0x35) [0x2b2db93d4d05] /lib/x86_64-linux-gnu/libc.so.6(abort+0x186) [0x2b2db93d8ab6] /lib/x86_64-linux-gnu/libc.so.6(+0x6ea9b) [0x2b2db940fa9b] /lib/x86_64-linux-gnu/libc.so.6(+0x788d6) [0x2b2db94198d6] /lib/x86_64-linux-gnu/libc.so.6(+0x7a841) [0x2b2db941b841] /lib/x86_64-linux-gnu/libc.so.6(cfree+0x73) [0x2b2db941f603] /usr/lib/mongodb/mongo(_ZN5boost6detail17sp_counted_impl_pIN5mongo7BSONObj6HolderEE7disposeEv+0x12) [0x45bd92] /usr/lib/mongodb/mongo(_ZN5boost6detail12shared_countD2Ev+0x49) [0x45d319] /lib/x86_64-linux-gnu/libc.so.6(exit+0xe1) [0x2b2db93da961] /usr/lib/mongodb/mongo(_Z10quitNicelyi+0x53) [0x458043] /lib/x86_64-linux-gnu/libpthread.so.0(+0xfc60) [0x2b2db753fc60] /lib/x86_64-linux-gnu/libc.so.6(kill+0x7) [0x2b2db93d4fe7] /lib/libreadline.so.6(+0x25888) [0x2b2db889b888] /lib/libreadline.so.6(rl_getc+0x5e) [0x2b2db889d9de] /lib/libreadline.so.6(rl_read_key+0xf8) [0x2b2db889e0c8] /lib/libreadline.so.6(readline_internal_char+0x61) [0x2b2db8889061] /lib/libreadline.so.6(readline+0x55) [0x2b2db88895b5] Any One have any idea?Why MongoDb Crashed? OS:ubuntu 11.04 2.6.32-pony6-3 RAM:2 GB

  Read the article

• Analyze a wireless network that constantly drops/has speed issues

  - by Eddie Parker

  Hello, I'm curious what the best tools are to use for analyzing problems with a WiFi network. Here's the scenario: I have a WiFi router (Belkin N+) that's setup in AP mode. I have three RT-N13U's that I've purchased to use as 'repeaters', but I've had so many problems when more than one of them is running (bad routes) that I've only got one active. Sometimes certain boxes on my network can't talk to others, and drops are quite frequent and quite aggravating. I'm running Mac, Windows, and Linux (Gentoo) boxes on this network, so any software, or steps I should take that work for any of those boxes should be sufficient. Apologies if this is answered somewhere else - I'll close it as a dupe if so.

  Read the article

• ASA Slow IPSec Performance with Inconsistent Window Size

  - by Brent

  I have a IPSec link between two sites over ASA 5520s running 8.4(3) and I am getting extremely poor performance when traffic passes over the IPSec VPN. CPU on the devices is ~13%, Memory at 408 MB, and active VPN sessions 2. The load on both of the the devices is particularly low. Latency between the two sites is ~40ms. Screenshot of wireshark file transfer between the two hosts over the firewall IPSec VPN performing at 10MBPS. Note the changing window size. http://imgur.com/wGTB8Cr Screenshot of wireshark file transfer between the two hosts over the firewall not going over IPSec performing at 55MBPS. Constant window size. http://imgur.com/EU23W1e I'm showing an inconsistent window size when transferring over the IPSec VPN ranging in 46,796 to 65535. When performing at 55+MBPS, the window size is consistently 65,535. Does this show a problem in my configuration of the IPSec VPN in the ASA or a Layer1/2 issue? Using ping xxxxxx -f -l I finally get a non-fragment at 1418 bytes so 1418+28 for IP/ICMP headers = 1446. I know that I have 1500 set on the ASA and Ethernet. I do have "Force Maximum segment size for TCP proxy connection to be" "1380" bytes set under Configuration Advanced TCP Options on the ASA. Using IPERF, I am getting a "TCP Window Full" every few seconds and ~3 MBPS performance. http://imgur.com/elRlMpY Show Run on the ASA http://pastebin.com/uKM4Jh76 Show cry accelerator stats http://pastebin.com/xQahnqK3

  Read the article

• Perl script segfaulting after 64-bit upgrade

  - by Brent

  I recently upgraded a 32-bit Debian server to 64-bit by re-installing, and copying my data into place. After this I have a perl script that repeats the following, and is segfaulting on the tell line: seek(FIN,$ps,0); tell(FIN, $ps); $line=<FIN>; I don't speak perl, so I'm not sure exactly what is going on here. I can get the script to run (apparently successfully) by commenting every occurrence of tell, but this is obviously not the best solution. I suspect that tell is calling a 32-bit binary or something, and that is the cause of the segfault - but I don't know. Can someone explain what tell does, and if it is indeed a separate binary, what package it belongs to (or how it is installed ie. cpan)? Or perhaps I am on the wrong track?

  Read the article

• Is span monitoring on Cisco ASA 5520 possible?

  - by Brent

  From what I have read, you can use the switchport monitor command on ASA 5505's to setup a Span port due to the back of the ASA actually being a switch. On my 5520, I do not see the switchport command listed when issuing a ? via the CLI. How do people monitor traffic on non-5505's? My goal is to connect our IDS/IPS device that is running is promiscuous mode to a Ethernet port on the 5520 to monitor WAN traffic. I do not want to have to pass the WAN traffic through a switch as it would require me to get two (for redundancy) STP/switchport capable switches. Guide to setting up switchport access on a 5505: http://www.wr-mem.com/?p=66

  Read the article

• Multi-Domain Root Administrator

  - by Brent Pabst

  We have a new domain structure we are planning on rolling out in the next few months. Essentially there is a single top level and forest domain controller "mydomain.lan" and two children "us.mydomain.lan" and "pl.mydomain.lan". We want to configure an administrator account or two at the top level domain that then has full administrator permissions on the sub domains. By default the top level administrator cannot access or login to machines on the sub-domains. Running W2K8R2. Ideas?

  Read the article

• Users not getting ip when connected through wifi,but wired connection getting ip in ddwrt router

  - by Kevin Parker

  I am having DD-WRT v24-sp2(05/08/11) running on Asus RT n 13 u B1 router,with dhcp on. But users not able to connect through wifi...its showing obtaining ip address and disconnects there after. Wired Devices are getting ip address and able to access internet.Wifi was working till yesterday,but all of a sudden it stopped working. on the ddwrt controlpanelsystem information under Wireless Clients mac address of clients that are trying to connect are appearing but soon it disappears. but no such issue with wired clients. Can any one please help me in fixing this..

  Read the article

• Windows 2008 R2 Task Scheduler Failure

  - by Jonathan Parker

  I have an application (.exe) which I am running via a scheduled task on Windows Server 2008 R2. The task runs fine but when the .exe returns a non-zero exit code the task is still successful when it should fail. I get this message: Task Scheduler successfully completed task "\CustomerDataSourceETL - Whics" , instance "{a574f6b4-2614-413c-8661-bc35eaeba7cd}" , action "E:\applications\CCDB-ETL\CustomerDataSourceETLConsole.exe" with return code 214794259. How can I get task scheduler to detect that the return code is 0 and fail the task?

  Read the article

• (Vista) Discover what app is reserving a shortcut key?

  - by Eddie Parker

  My problem is this: I've always managed to map WIN+V to foobar2000's "Next song" keyboard shortcut. For some reason, on this new machine, I can't. I've done this before on Vista, so the only thing I can think of is that some other application is holding onto this shortcut key. When I try to assign the shortcut key in foobar2000, nothing registers. When I press it outside of foobar2000, nothing occurs either. I'm at a loss as to how to proceed. Are there any apps to see what hooks are being requested by what application? Or is there a better way of diagnosing this?

  Read the article

• Active Directory Password Formats

  - by Brent Pabst

  Hi, I'm working on an open source project that will manage active directory users. I am looking for feedback from Windows/Active Directory Admins on the formats of usernames they prefer or their organization uses. I want to make sure the software allows admins to use the most popular formats when new users are created. Here is the list I have so far: 1. <firstname><lastname> 2. <lastname><firstname> 3. <lastname><firstinitial> 4. <lastname><firstinitial><middleinitial> 5. <firstinitial><lastname> 6. <firstinitial><middleinitial><lastname> 7. <firstname><lastinitial> In addition how do you handle multiple identical names? So if two John Smith's exist do you append a numeric number, or interject a middle initial or name to solve the problem? Thanks for the feedback

  Read the article

• Windows 2008 R2 Task Scheduler Failure

  - by Jonathan Parker

  I have an application (.exe) which I am running via a scheduled task on Windows Server 2008 R2. The task runs fine but when the .exe returns a non-zero exit code the task is still successful when it should fail. I get this message: Task Scheduler successfully completed task "\CustomerDataSourceETL - Whics" , instance "{a574f6b4-2614-413c-8661-bc35eaeba7cd}" , action "E:\applications\CCDB-ETL\CustomerDataSourceETLConsole.exe" with return code 214794259. How can I get task scheduler to detect that the return code is 0 and fail the task?

  Read the article

• What are the effects of the L root server now publishing DURZ?

  - by brent

  I'm curious what the actual effects of the L root server publishing DURZ today will be. On the nanog mailing list, someone said it's important to evaluate the systemic effects of root name servers publishing signed zones, even when not using DNSSEC. Meanwhile, RIPE's own published information on their changes to the K root server say there's no issue if your resolvers don't use DNSSEC. Can someone please clear this up? DNSSEC seems to be a messy, tangled web. If not enabling DNSSEC on my resolvers, do I have anything to worry about with the upcoming changes to the root servers?

  Read the article

• OpenWrt Backfire 10.03 Frequently Becoming Unresponsive (Bridged Client)

  - by Christopher Parker

  I have a Linksys WRT54G version 2 that I've flashed with OpenWrt Backfire 10.03. It's acting as a bridged client using the wl.o driver to give me network access in my home office, which is in a far corner of my house in a position that would make it exceedingly difficult to fish network cabling in through the walls. I have three network-ready devices attached to the device that don't currently support WiFi, including a networked printer. Ever since I migrated from WhiteRussian, which was also set up as a bridged client, to Backfire, the device has been becoming unresponsive, as though the OS itself has crashed or frozen. The WLAN light becomes completely solid and the LAN lights stay mostly solid, blipping off and then back on again maybe once a second or so. They all blink more or less in unison. Is there some way I can diagnose why this is happening so I can fix it? Right now, the only way to fix it is to unplug the device and plug it back in.

  Read the article

• IIS NLB Web Farm to front Single Tomcat Instance

  - by Brent Pabst

  I've got a single Tomcat 6 server that hosts a JSP app. We just spun up a new IIS 7.5 web farm to host our other internal apps. Currently the machine that hosts Tomcat is also running IIS 7 with the ISAPI filter loaded to provide front-end handling for the JSP app. I'd like to move the IIS portion to the web farm to consolidate our IIS presence and let the Tomcat server just serve and run Java and Tomcat. Has anyone done this, is it even possible while ensuring session state is properly maintained? I had it up and running using the IIS Tomcat Connector http://tomcatiis.riaforge.org/ but after a while the communication between the boxes slowed and pages would not load. In addition it seemed like some of our authentication tickets were timing out. Thanks for any ideas or reference material!

  Read the article

• Gentoo Linux -> Ubuntu: Can I Preserve My LVM/RAID Devices, Or Do I Need To Reformat?

  - by Eddie Parker

  Hello: I've got a Gentoo box that I'm interested in switching over to an Ubuntu box. I currently have the partitions laid out using a mixture of RAID (mdadm) and LVM2, as specified in this document [1]. Ideally I'd like to just wipe out the non /home partition, as it's got data I'd like to keep. Is it possible to reuse the current setup, or do I need to restart? vgdisplay, vgchange -a y, etc don't yield any results from the Ubuntu LiveCD, and I'm wary to run any commands that might wipe my data. Your help would be appreciated. [1] http://www.gentoo.org/doc/en/gentoo-x86+raid+lvm2-quickinstall.xml

  Read the article

• How to make emacs accept UTF-8 from the keyboard

  - by Brent.Longborough

  My friends have persuaded me to "try again" (about the 5th time in about 12 years) with emacs. I'm currently suffering a little, and need help with emacs + utf-8. I'm running the 23.3.1 emacs gui on Windows 7 with my own custom keyboard layout (built with MS Keyboard Layout Creator). The layout has a full ISO-8859-1 (Latin-1) character set, plus some additional characters from ISO-8859-9 (Latin-5, gis etc for Turkish) and w for Welsh (don't know where that one lives). In my .emacs, I have (blindly) added these lines: ;; key board / input method settings (setq locale-coding-system 'utf-8) (set-terminal-coding-system 'utf-8) (set-keyboard-coding-system 'utf-8) (set-language-environment 'UTF-8) ; prefer utf-8 for language settings Now, when I enter characters from ISO Latin-1 from the keyboard, they are accepted without problems, but characters from outside Latin-1 are "translated" to an approximate character in Latin-1. Thus, for example, Latin-5 "g" gets converted to a plain "g". Cutting and pasting, however, work fine. Can anyone tell me what I'm doing wrong? I should like to make everything I do with emacs utf-8 with BOM.

  Read the article

• Nodejs for processing js and Nginx for handling everything else

  - by Kevin Parker

  I am having a nodejs running on port 8000 and nginx on port 80 on same server. I want Nginx to handle all the requests(image,css,etc) and forward js requests to nodejs server on port 8000. Is it possible to achieve this. i have configured nginx as reverse proxy but its forwarding every request to nodejs but i want nginx to process all except js. nginx/sites-enabled/default/ upstream nodejs { server localhost:8000; #nodejs } location / { proxy_pass http://192.168.2.21:8000; proxy_next_upstream error timeout invalid_header http_500 http_502 http_503 http_504; proxy_redirect off; proxy_buffering off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; }

  Read the article

• Small TCP Window on WAN between 2 Locations

  - by Brent

  Site A: Denver datacenter. 60MBPS. Site B: Chicago. 100MBPS. ICMP pings: Packets: Sent = 176, Received = 176, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 74ms, Maximum = 94ms, Average = 75ms File transfer between sites that never goes past ~7MBPS: Windows Update download at 60MBPS+: Site to site: IPSec VPN using two Cisco 5520's. CPU at 3-4% and lots of memory to spare. The latency between to two sites is very acceptable so I can't see an issue why it is performing so slow when transferring between the two sites. I have found that any type of transfer (FTP, HTTP, Windows file shares) will never go above ~7MBPS. When the WAN was first setup, I was able to get transfers at 50-60MBPS, which is what is expected due to the WAN connection at the Site A at 60MBPS. Then a few days later, I was not able to get anything going faster than ~7MBPS. Is there a upstream router between Denver and Chicago causing this? I want to take the blame away from our setup as downloads from Windows Update go blazing fast and for the first few days after the site to site VPN came up, I was transferring VM images at 50-60MBPS. Our stack: HP P2000 MSA - HP C7000 Chassis - HP Flex-10 - Cisco Gigabit switch - Cisco ASA - WAN

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11  | Next Page >