Search Results

Search found 65 results on 3 pages for 'cancellation'.

Page 3/3 | < Previous Page | 1 2 3 

• Cisco 678 Will Not Work using PPPoE - Possibly Because I Configured it Incorrectly..?

  - by Brian Stinar

  I am attempting to configure a Cisco 678 because I am totally sick on my Actiontec. However, I am running into some problems. It seems as though the Cisco is able to train the line, but I am unable to ping out. I am all right at programming, but still learning a lot when it comes to being a system administrator. I apologize in advance if I did something ridiculous, or am attempting to configure this device to do something it was not designed to do. It is almost like I am not correctly configuring the device to grab it's IP using PPPoA (like my Actiontec.) The output from "show running" (below) makes me think this too. Below are the commands I ran in order to configure this: # en # set nvram erase # write # reboot # en # set nat enable # set dhcp server enable # set PPP wan0-0 ipcp 0.0.0.0 # set ppp wan0-0 dns 0.0.0.0 # set PPP wan0-0 login xxxxx // My actual login # set PPP wan0-0 password yyyyy // My actual password # set PPP restart enabled # set int wan0-0 close # set int wan0-0 vpi 0 # set int wan0-0 vci 32 # set int wan0-0 open # write # reboot Here is the output from a few commands I thought could provide some useful information: cbos#ping 74.125.224.113 Sending 1 8 byte ping(s) to 74.125.224.113 every 2 second(s) Request timed out cbos#show version Cisco Broadband Operating System CBOS (tm) 678 Software (C678-I-M), Version v2.4.9 - Release Software Copyright (c) 1986-2001 by cisco Systems, Inc. Compiled Nov 17 2004 15:26:29 DMT FULL firmware version G96 NVRAM image at 0x1030f000 cbos#show errors - Current Error Messages - ## Ticks Module Level Message 0 000:00:00:00 PPP Info IPCP Open Event on wan0-0 1 000:00:00:14 ATM Info Wan0 Up 2 000:00:00:14 PPP Info PPP Up Event on wan0-0 3 000:00:01:54 PPP Info PPP Down Event on wan0-0 Total Number of Error Messages: 4 cbos#show interface wan0 wan0 ADSL Physical Port Line Trained Actual Configuration: Overhead Framing: 3 Trellis Coding: Enabled Standard Compliance: T1.413 Downstream Data Rate: 1184 Kbps Upstream Data Rate: 928 Kbps Interleave S Downstream: 4 Interleave D Downstream: 16 Interleave R Downstream: 16 Interleave S Upstream: 4 Interleave D Upstream: 8 Interleave R Upstream: 16 Modem Microcode: G96 DSP version: 0 Operating State: Showtime/Data Mode Configured: Echo Cancellation: Disabled Overhead Framing: 3 Coding Gain: Auto TX Power Attenuation: 0dB Trellis Coding: Enabled Bit Swapping: Disabled Standard Compliance: T1.413 Remote Standard Compliance: T1.413 Tx Start Bin: 0x6 Tx End Bin: 0x1f Data Interface: Utopia L1 Status: Local SNR Margin: 19.0dB Local Coding Gain: 7.5dB Local Transmit Power: 12.5dB Local Attenuation: 46.0dB Remote Attenuation: 31.0dB Local Counters: Interleaved RS Corrected Bytes: 0 Interleaved Symbols with CRC Errors: 2 No Cell Delineation Interleaved: 0 Out of Cell Delineation Interleaved: 0 Header Error Check Counter Interleaved: 0 Count of Severely Errored Frames: 0 Count of Loss of Signal Frames: 0 Remote Counters: Interleaved RS Corrected Bytes: 0 Interleaved Symbols with CRC Errors: 1 No Cell Delineation Interleaved: 0 Header Error Check Counter Interleaved: 0 Count of Severely Errored Frames: 0 Count of Loss of Signal Frames: 0 cbos#show int wan0-0 WAN0-0 ATM Logical Port PVC (VPI 0, VCI 32) is configured. ScalaRate set to Auto AAL 5 UBR Traffic IP Port Enabled cbos#show running Warning: traffic may pause while NVRAM is being accessed [[ CBOS = Section Start ]] NSOS MD5 Enable Password = XXXX NSOS MD5 Root Password = XXXX NSOS MD5 Commander Password = XXXX [[ PPP Device Driver = Section Start ]] PPP Port User Name = 00, "XXXX" PPP Port User Password = 00, XXXX PPP Port Option = 00, IPCP,IP Address,3,Auto,Negotiation Not Required,Negotiable ,IP,0.0.0.0 PPP Port Option = 00, IPCP,Primary DNS Server,129,Auto,Negotiation Not Required, Negotiable,IP,0.0.0.0 PPP Port Option = 00, IPCP,Secondary DNS Server,131,Auto,Negotiation Not Require d,Negotiable,IP,0.0.0.0 [[ ATM WAN Device Driver = Section Start ]] ATM WAN Virtual Connection Parms = 00, 0, 32, 0 [[ DHCP = Section Start ]] DHCP Server = enabled [[ IP Routing = Section Start ]] IP NAT = enabled [[ WEB = Section Start ]] WEB = enabled cbos# wtf...? Thank you all very much for taking the time to read this, and the help.

  Read the article

• ParallelWork: Feature rich multithreaded fluent task execution library for WPF

  - by oazabir

  ParallelWork is an open source free helper class that lets you run multiple work in parallel threads, get success, failure and progress update on the WPF UI thread, wait for work to complete, abort all work (in case of shutdown), queue work to run after certain time, chain parallel work one after another. It’s more convenient than using .NET’s BackgroundWorker because you don’t have to declare one component per work, nor do you need to declare event handlers to receive notification and carry additional data through private variables. You can safely pass objects produced from different thread to the success callback. Moreover, you can wait for work to complete before you do certain operation and you can abort all parallel work while they are in-flight. If you are building highly responsive WPF UI where you have to carry out multiple job in parallel yet want full control over those parallel jobs completion and cancellation, then the ParallelWork library is the right solution for you. I am using the ParallelWork library in my PlantUmlEditor project, which is a free open source UML editor built on WPF. You can see some realistic use of the ParallelWork library there. Moreover, the test project comes with 400 lines of Behavior Driven Development flavored tests, that confirms it really does what it says it does. The source code of the library is part of the “Utilities” project in PlantUmlEditor source code hosted at Google Code. The library comes in two flavors, one is the ParallelWork static class, which has a collection of static methods that you can call. Another is the Start class, which is a fluent wrapper over the ParallelWork class to make it more readable and aesthetically pleasing code. ParallelWork allows you to start work immediately on separate thread or you can queue a work to start after some duration. You can start an immediate work in a new thread using the following methods: void StartNow(Action doWork, Action onComplete) void StartNow(Action doWork, Action onComplete, Action<Exception> failed) For example, ParallelWork.StartNow(() => { workStartedAt = DateTime.Now; Thread.Sleep(howLongWorkTakes); }, () => { workEndedAt = DateTime.Now; }); Or you can use the fluent way Start.Work: Start.Work(() => { workStartedAt = DateTime.Now; Thread.Sleep(howLongWorkTakes); }) .OnComplete(() => { workCompletedAt = DateTime.Now; }) .Run(); Besides simple execution of work on a parallel thread, you can have the parallel thread produce some object and then pass it to the success callback by using these overloads: void StartNow<T>(Func<T> doWork, Action<T> onComplete) void StartNow<T>(Func<T> doWork, Action<T> onComplete, Action<Exception> fail) For example, ParallelWork.StartNow<Dictionary<string, string>>( () => { test = new Dictionary<string,string>(); test.Add("test", "test"); return test; }, (result) => { Assert.True(result.ContainsKey("test")); }); Or, the fluent way: Start<Dictionary<string, string>>.Work(() => { test = new Dictionary<string, string>(); test.Add("test", "test"); return test; }) .OnComplete((result) => { Assert.True(result.ContainsKey("test")); }) .Run(); You can also start a work to happen after some time using these methods: DispatcherTimer StartAfter(Action onComplete, TimeSpan duration) DispatcherTimer StartAfter(Action doWork,Action onComplete,TimeSpan duration) You can use this to perform some timed operation on the UI thread, as well as perform some operation in separate thread after some time. ParallelWork.StartAfter( () => { workStartedAt = DateTime.Now; Thread.Sleep(howLongWorkTakes); }, () => { workCompletedAt = DateTime.Now; }, waitDuration); Or, the fluent way: Start.Work(() => { workStartedAt = DateTime.Now; Thread.Sleep(howLongWorkTakes); }) .OnComplete(() => { workCompletedAt = DateTime.Now; }) .RunAfter(waitDuration);   There are several overloads of these functions to have a exception callback for handling exceptions or get progress update from background thread while work is in progress. For example, I use it in my PlantUmlEditor to perform background update of the application. // Check if there's a newer version of the app Start<bool>.Work(() => { return UpdateChecker.HasUpdate(Settings.Default.DownloadUrl); }) .OnComplete((hasUpdate) => { if (hasUpdate) { if (MessageBox.Show(Window.GetWindow(me), "There's a newer version available. Do you want to download and install?", "New version available", MessageBoxButton.YesNo, MessageBoxImage.Information) == MessageBoxResult.Yes) { ParallelWork.StartNow(() => { var tempPath = System.IO.Path.Combine( Environment.GetFolderPath(Environment.SpecialFolder.ApplicationData), Settings.Default.SetupExeName); UpdateChecker.DownloadLatestUpdate(Settings.Default.DownloadUrl, tempPath); }, () => { }, (x) => { MessageBox.Show(Window.GetWindow(me), "Download failed. When you run next time, it will try downloading again.", "Download failed", MessageBoxButton.OK, MessageBoxImage.Warning); }); } } }) .OnException((x) => { MessageBox.Show(Window.GetWindow(me), x.Message, "Download failed", MessageBoxButton.OK, MessageBoxImage.Exclamation); }); The above code shows you how to get exception callbacks on the UI thread so that you can take necessary actions on the UI. Moreover, it shows how you can chain two parallel works to happen one after another. Sometimes you want to do some parallel work when user does some activity on the UI. For example, you might want to save file in an editor while user is typing every 10 second. In such case, you need to make sure you don’t start another parallel work every 10 seconds while a work is already queued. You need to make sure you start a new work only when there’s no other background work going on. Here’s how you can do it: private void ContentEditor_TextChanged(object sender, EventArgs e) { if (!ParallelWork.IsAnyWorkRunning()) { ParallelWork.StartAfter(SaveAndRefreshDiagram, TimeSpan.FromSeconds(10)); } } If you want to shutdown your application and want to make sure no parallel work is going on, then you can call the StopAll() method. ParallelWork.StopAll(); If you want to wait for parallel works to complete without a timeout, then you can call the WaitForAllWork(TimeSpan timeout). It will block the current thread until the all parallel work completes or the timeout period elapses. result = ParallelWork.WaitForAllWork(TimeSpan.FromSeconds(1)); The result is true, if all parallel work completed. If it’s false, then the timeout period elapsed and all parallel work did not complete. For details how this library is built and how it works, please read the following codeproject article: ParallelWork: Feature rich multithreaded fluent task execution library for WPF http://www.codeproject.com/KB/WPF/parallelwork.aspx If you like the article, please vote for me.

  Read the article

• CodePlex Daily Summary for Saturday, October 22, 2011

  CodePlex Daily Summary for Saturday, October 22, 2011Popular ReleasesWatchersNET CKEditor™ Provider for DotNetNuke®: CKEditor Provider 1.12.17: Changes Added FilePath Length Check when Uploading Files. Fixed Issue #6550 Fixed Issue #6536 Fixed Issue #6525 Fixed Issue #6500 Fixed Issue #6401 Fixed Issue #6490DotNet.Framework.Common: DotNet.Framework.Common 4.0: ??????????，????????????XML Explorer: XML Explorer 4.0.5: Changes in 4.0.5: Added 'Copy Attribute XPath to Address Bar' feature. Added methods for decoding node text and value from Base64 encoded strings, and copying them to the clipboard. Added 'ChildNodeDefinitions' to the options, which allows for easier navigation of parent-child and ID-IDREF relationships. Discovery happens on-demand, as nodes are expanded and child nodes are added. Nodes can now have 'virtual' child nodes, defined by an xpath to select an identifier (usually relative to ...Media Companion: MC 3.419b Weekly: A couple of minor bug fixes, but the important fix in this release is to tackle the extremely long load times for users with large TV collections (issue #130). A note has been provided by developer Playos: "One final note, you will have to suffer one final long load and then it should be fixed... alternatively you can delete the TvCache.xml and rebuild your library... The fix was to include the file extension so it doesn't have to look for the video file (checking to see if a file exists is a...CODE Framework: 4.0.11021.0: This build adds a lot of our WPF components, including our MVVC and MVC components as well as a "Metro" and "Battleship" style.Manejo de tags - PHP sobre apache: tagqrphp: Primera version: Para que funcione el programa se debe primero obtener un id para desarrollo del tag eso lo entrega Microsoft registrandose en el sitio. http://tag.microsoft.com - En tagm.php que llama a la libreria Microsoft Tag PHP Library (Codigo que sirve para trabajar con PHP y Tag) - Llenamos los datos del formulario y ejecutamos para obtener el codigo tag de microsoft el cual apunte a la url que le indicamos en el formulario - Libreria MStag.php (tiene mucha explicación del funciona...GridLibre para Visual FoxPro: GridLibre para Visual FoxPro v3.5: GridLibre Para Visual FoxPro: esta herramienta ayudara a los usuarios y programadores en los manejos de los datos, como Filtrar, multiseleccion y el autoformato a las columnas como la asignacion del controlsource.Self-Tracking Entity Generator for WPF and Silverlight: Self-Tracking Entity Generator v 0.9.9: Self-Tracking Entity Generator v 0.9.9 for Entity Framework 4.0Umbraco CMS: Umbraco 5.0 CMS Alpha 3: Umbraco 5 Alpha 3Umbraco 5 (aka Jupiter) will be the next version of everyone's favourite, friendly ASP.NET CMS that already powers over 100,000 websites worldwide. Try out the Alpha of v5 today! If you're new to Umbraco and would like to get a low-down on our popular and easy-to-learn approach to content management, check out our intro video. What's Alpha 3?This is our third Alpha release. It's intended for developers looking to become familiar with the codebase & architecture, or for thos...Vkontakte WP: Vkontakte: source codeWay2Sms Applications for Android, Desktop/Laptop & Java enabled phones: Way2SMS Desktop App v2.0: 1. Fixed issue with sending messages due to changes to Way2Sms site 2. Updated the character limit to 160 from 140GART - Geo Augmented Reality Toolkit: 1.0.1: About Release 1.0.1 Release 1.0.1 is a service release that addresses several issues and improves performance. As always, check the Documentation tab for instructions on how to get started. If you don't have the Windows Phone SDK yet, grab it here. Breaking Change Please note: There is a breaking change in this release. As noted below, the WorldCalculationMode property of ARItem has been replaced by a user-definable function. ARItem is now automatically wired up with a function that perform...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.32: Fix for issue #16710 - string literals in "constant literal operations" which contain ASP.NET substitutions should not be considered "constant." Move the JS1284 error (Misplaced Function Declaration) so it only fires when in strict mode. I got a couple complaints that people didn't like that error popping up in their existing code when they could verify that the location of that function, although not strict JS, still functions as expected cross-browser.Naked Objects: Naked Objects Release 4.0.110.0: Corresponds to the packaged version 4.0.110.0 available via NuGet. Please note that the easiest way to install and run the Naked Objects Framework is via the NuGet package manager: just search the Official NuGet Package Source for 'nakedobjects'. It is only necessary to download the source code (from here) if you wish to modify or re-build the framework yourself. If you do wish to re-build the framework, consul the file HowToBuild.txt in the release. Documentation Please note that after ...myCollections: Version 1.5: New in this version : Added edit type for selected elements Added clean for selected elements Added Amazon Italia Added Amazon China Added TVDB Italia Added TVDB China Added Turkish language You can now manually add artist Added Order by Rating Improved Add by Media Improved Artist Detail Upgrade Sqlite engine View, Zoom, Grouping, Filter are now saved by category Added group by Artist Added CubeCover View BugFixingFacebook C# SDK: 5.3: This is a BETA release which adds new features and bug fixes to v5.2.1. removed dependency from Code Contracts enabled Task Parallel Support in .NET 4.0+ added support for early preview for .NET 4.5 added additional method overloads for .NET 4.5 to support IProgress<T> for upload progress added new CS-WinForms-AsyncAwait.sln sample demonstrating the use of async/await, upload progress report using IProgress<T> and cancellation support Query/QueryAsync methods uses graph api instead...IronPython: 2.7.1 RC: This is the first release candidate of IronPython 2.7.1. Like IronPython 54498, this release requires .NET 4 or Silverlight 4. This release will replace any existing IronPython installation. If there are no showstopping issues, this will be the only release candidate for 2.7.1, so please speak up if you run into any roadblocks. The highlights of 2.7.1 are: Updated the standard library to match CPython 2.7.2. Add the ast, csv, and unicodedata modules. Fixed several bugs. IronPython To...Rawr: Rawr 4.2.6: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...Home Access Plus+: v7.5: Change Log: New Booking System (out of Beta) New Help Desk (out of Beta) New My Files (Developer Preview) Token now saved into Cookie so the system doesn't TIMEOUT as much File Changes: ~/bin/hap.ad.dll ~/bin/hap.web.dll ~/bin/hap.data.dll ~/bin/hap.web.configuration.dll ~/bookingsystem/admin/default.aspx ~/bookingsystem/default.aspx REMOVED ~/bookingsystem/bookingpopup.ascx REMOVED ~/bookingsystem/daylist.ascx REMOVED ~/bookingsystem/new.aspx ~/helpdesk/default.aspx ...Visual Micro - Arduino for Visual Studio: Arduino for Visual Studio 2008 and 2010: Arduino for Visual Studio 2010 has been extended to support Visual Studio 2008. The same functionality and configuration exists between the two versions. The 2010 addin runs .NET4 and the 2008 addin runs .NET3.5, both are installed using a single msi and both share the same configuration settings. The only known issue in 2008 is that the button and menu icons are missing. Please logon to the visual micro forum and let us know if things are working or not. Read more about this Visual Studio ...New Projects#foo Core: Core functionality extensions of .NET used by all HashFoo projects.#foo Nhib: #foo NHibernate extensions.Aagust G: Hello all ! Its a free JQuery Image Slider....ACP Log Analyzer: ACP Log Analyzer provides a quick and easy mechanism for generating a report on your ACP-based astronomical observing activities. Developed in Microsoft Visual Studio 2010 using C#, the .NET Framework version 4 and WPF.BlobShare Sample: TBDCompletedWorkflowCleanUp: This tool once executed on a list delete all completed workflow instancesCRM 2011 Visual Ribbon Editor: Visual Ribbon Editor is a tool for Microsoft Dynamics CRM 2011 that lets you edit CRM ribbons. This ribbon editor shows a preview of the CRM ribbon as you are editing it and allows you to add ribbon buttons and groups without needing to fully understand the ribbon XML schema.GearMerge: Organizes Movies and TV Series files from one Hard Drive to another. I created it for myself to update external drives with movies and TV shows from my collection.Generic Object Storage Helper for WinRT: ObjectStorageHelper<T> is a Generic class that simplifies storage of data in WinRT applications.Government Sanctioned Espionage RPG: Government Sanctioned is a modern SRD-like espionage game server. Visit http://wiki.government-sanctioned.us:8040 for game design and play information or homepage http://www.government-sanctioned.us Government Sanctioned is an online, text-based espionage RPG (similar to a MUD/MOO) that takes place against the backdrop of a highly-secretive U.S. Government agency whose stated goals don't always match the dirty work the agents tend to find themselves in. - over 15 starting profession...GridLibre para Visual FoxPro: GridLibre Para Visual FoxPro: esta herramienta ayudara a los usuarios y programadores en los manejos de los datos, como Filtrar, multiseleccion y el autoformato a las columnas como la asignacion del controlsource.HTML5 Video Web Part for SharePoint 2010: A web part for SharePoint 2010 that enable users playing video into the page using the Ribbon bar.Jogo do Galo: JOGO DO GALO REGRAS •O tabuleiro é a matriz de três linhas em três colunas. •Dois jogadores escolhem três peças cada um. •Os jogadores jogam alternadamente, uma peça de cada vez, num espaço que esteja vazio. •O objectivo é conseguir três peças iguais em linha, quer horizontal, vKarol sie uczy silverlajta: on sie naprawde tego uczy!Manejo de tags - PHP sobre apache: Hago uso de la libreria Microsoft Tag PHP Library para que pueda funcionar la aplicación sobre Apache finalmente puede crear tag de micrsosoft desde el formulario creado. Modem based SMS Gateway: It is an easy to use modem based SMS server that provide easier solutions for SMS marketing or SMS based services. It is highly programmable and the easy to use API interface makes SMS integration very easy. Embedded SMS processor provides customized solution to many of your needs even without building any custom software.Mund Publishing Feture: Mund Publishing FeatureMyTFSTest: TestNHS HL7 CDA Document Developer: A project to demonstrate how templated HL7 CDA documents can be created by using a common API. The API is designed to be used in .NET applications. A number of examples are provided using C#OpenShell: OpenShell is an open source implementation of the Windows PowerShell engine. It is to make integrating PowerShell into standalone console programs simple.Powershell Script to Copy Lists in a Site Collection in MOSS 2007 and SPS 2010: Hi, This is a powershell script file that copies a list within the same site collection. This works in Sharepoint 2007 and Sharepoint 2010 as well. THis will flash the messages before taking the input values. This will in this way provide the clear ideas about the values to beSharePoint Desktop: SharePoint Desktop is a explorer-like webpart that makes it possible to drag and drop items (documents and folders), copy and paste items and explore all SharePoint document libraries in 1 place.SQL floating point compare function: Comparison of floating point values in SQL Server not always gives the expected result. With this function, comparison is only done on the first 15 significant digits. Since SQL Server only garantees a precision of 15 digits for float datatypes, this is expected to be secure.Stock Analyzer: It is a stock management software. It's main job is to store market realtime data on a database to be able to analyse it latter and create automatic systems that operate directly on the stock exchange market. It will have different modules to do this task: - Realtime data capture. - Realtime data analysis - Historic analysis. - Order execution. - Strategy test. - Strategy execution. It's developed in C# and with WPF.VB_Skype: VB_Skype utilizza la libreria Skype4COM per integrare i servizi Skype con un'applicazione Visual Basic (Windows Forms). L'applicazione comprende un progetto di controllo personalizzato che costituisce il "wrapper" verso la libreria Skype4COM e un progetto con una demo di utilizzo. Progetto che dovrebbe essere utilizzato nella mia sessione, come uno degli speaker della conferenza "WPC 2011" che si terrà ad Assago (MI) nei giorni 22-23-24 Novembre 2011. La mia sessione è in agenda per il 24...Word Template Generator: Custom Template Generator for Microsoft Word, developed in C#?????OA??: ?????OA??

  Read the article

• D2K to OA Framework Transition

  - by PRajkumar

  What is the difference between D2K form and OA Framework? It is a very innocent but important question for someone that desires to make transition from D2K to OA Framework. I hope you have already read and implemented OA Framework Getting Started. I will re-visit my own experience of implementing HelloWorld program in "OA Framework". When I implemented HelloWorld a year ago, I had no clue as to what I was doing & why I was doing those steps. I merely copied the steps from Oracle Tutorial without understanding them. Hence in this blog, I will try to explain in simple manner the meaning of OA Framework HelloWorld Program and compare the steps to D2K form [where possible]. To keep things simple, only basics will be discussed. Following key Steps were needed for HelloWorld Step 1 Create a new Workspace and a new Project as dictated by Oracle's tutorial. When defining project, you will specify a default package, which in this case was oracle.apps.ak.hello This means the following: - ak is the short name of the Application in Oracle           [means fnd_applications.short_name] hello is the name of your project Step 2 Next, you will create a OA Page within hello project Think OA Page as the fmx file itself in D2K. I am saying so because this page gets attached to the form function. This page will be created within hello project, hence the package name oracle.apps.ak.hello.webui Note the webui, it is a convention to have page in webui, means this page represents the Web User Interface You will assign the default AM [OAApplicationModule]. Think of AM "Connection Manager" and "Transaction State Manager" for your page          I can't co-relate this to anything in D2k, as there is no concept of Connection Pooling and that D2k is not stateless. Reason being that as soon as you kick off a D2K Form, it connects to a single session of Oracle and sticks to that single Oracle database session. So is not the case in OAF, hence AM is needed. Step 3 You create Region within the Page. ·         Region is what will store your fields. Text input fields will be of type messageTextInput. Think of Canvas in D2K. You can have nested regions. Stacked Canvas in D2K comes the closest to this component of OA Framework Step 4 Add a button to one of the nested regions The itemStyle should be submitButton, in case you want the page to be submitted when this button is clicked There is no WHEN-BUTTON-PRESSED trigger in OAF. In Framework, you will add a controller java code to handle events like Form Submit button clicks. JDeveloper generates the default code for you. Primarily two functions [should I call methods] will be created processRequest [for UI Rendering Handling] and processFormRequest          Think of processRequest as WHEN-NEW-FORM-INSTANCE, though processRequest is very restrictive. Note What is the difference between processRequest and processFormRequest? These two methods are available in the Default Controller class that gets created. processFormRequest This method is commonly used to react/respond to the event that has taken place, for example click of a button. Some examples are if(oapagecontext.getParameter("Cancel") != null) (Do your processing for Cancellation/ Rollback) if(oapagecontext.getParameter("Submit") != null) (Do your validations and commit here) if(oapagecontext.getParameter("Update") != null) (Do your validations and commit here) In the above three examples, you could be calling oapagecontext.forwardImmediately to re-direct the page navigation to some other page if needed. processRequest In this method, usually page rendering related code is written. Effectively, each GUI component is a bean that gets initialised during processRequest. Those who are familiar with D2K forms, something like pre-query may be written in this method. Step 5 In the controller to access the value in field "HelloName" the command is String userContent = pageContext.getParameter("HelloName"); In D2k, we used :block.field. In OAFramework, at submission of page, all the field values get passed into to OAPageContext object. Use getParameter to access the field value To set the value of the field, use OAMessageTextInputBean field HelloName = (OAMessageTextInputBean)webBean.findChildRecursive("HelloName"); fieldHelloName.setText(pageContext,"Setting the default value" ); Note when setting field value in controller: Note 1. Do not set the value in processFormRequest Note 2. If the field comes from View Object, then do not use setText in controller Note 3. For control fields [that are not based on View Objects], you can use setText to assign values in processRequest method Lets take some notes to expand beyond the HelloWorld Project Note 1 In D2K-forms we sort of created a Window, attached to Canvas, and then fields within that Canvas. However in OA Framework, think of Page being fmx/Window, think of Region being a Canvas, and fields being within Regions. This is not a formal/accurate understanding of analogy between D2k and Framework, but is close to being logical. Note 2 In D2k, your Forms fmb file was compiled to fmx. It was fmx file that was deployed on mid-tier. In case of OAF, your OA Page is nothing but a XML file. We call this MDS [meta data]. Whatever name you give to "Page" in OAF, an XML file of the same name gets created. This xml file must then be loaded into database by using XML Importer command. Note 3 Apart from MDS XML file, almost everything else is merely deployed to your mid-tier. Usually this is underneath $JAVA_TOP/oracle/apps/../.. All java files will go underneath java top/oracle/apps/../.. etc. Note 4 When building tutorial, ignore the steps for setting "Attribute Sets". These are not mandatory. Oracle might just have developed their tutorials without including these. Think of these like Visual Attributes of D2K forms Note 5 Controller is where you will write any java code in OA Framework. You can create a Controller per Page or have a different Controller for each of the Regions with the same Page. Note 6 In the method processFormRequest of the Controller, you can access the values of the page by using notation pageContext.getParameter("<fieldname here>"). This method processFormRequest is executed when the OAF Screen/Page is submitted by click of a button. Note 7 Inside the controller, all the Database Related interactions for example interaction with View Objects happen via Application Module. But why so? Because Application Module Manages the transaction state of the Application. OAApplicationModuleImpl oaapplicationmoduleimpl = OAApplicationModuleImpl)oapagecontext.getApplicationModule(oawebbean); OADBTransaction oadbtransaction = OADBTransaction)oaapplicationmoduleimpl.getDBTransaction(); Note 8 In D2K, we have control block or a block based on database view. Similarly, in OA Framework, if the field does not have view Object attached, then it is like a control field. Hence in HelloWorld example, field HelloName is a control field [in D2K terminology]. A view Object can either be based on a view/table, synonym or on a SQL statement. Note 9 I wish to access the fields in multi record block that is based on view Object. Can I do this in Controller? Sure you can. To traverse through those records, do the below ·         Get the reference to the View Object using (OAViewObject)oapagecontext.getApplicationModule(oawebbean).findViewObject("VO Name Here") ·         Loop through the records in View Objects using count returned from oaviewobject.getFetchedRowCount() ·         For each record, fetch the value of the fields within the loop as oracle.jbo.Row row = oaviewobject.getRowAtRangeIndex(loop index here); (String)row.getAttribute("Column name of VO here ");

  Read the article

• Java thread dump where main thread has no call stack? (jsvc)

  - by dwhsix

  We have a java process running as a daemon (under jsvc). Every several days it just stops doing any work; output to the logfile stops (it is pretty verbose, on 5-minute intervals) and it consumes no CPU or IO. There are no exceptions logged in the logfile nor in syserr or sysout. The last log statement is just prior to a db commit being done, but there is no open connection on the db server (MySQL) and reviewing the code, there should always be additional log output after that, even if it had encountered an exception that was going to bubble up. The most curious thing I find is that in the thread dump (included below), there's no thread in our code at all, and the main thread seems to have no context whatsoever: "main" prio=10 tid=0x0000000000614000 nid=0x445d runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE As noted earlier, this is a daemon process running using jsvc, but I don't know if that has anything to do with it (I can restructure the code to also allow running it directly, to test). Any suggestions on what might be happening here? Thanks... dwh Full thread dump: Full thread dump Java HotSpot(TM) 64-Bit Server VM (14.2-b01 mixed mode): "MySQL Statement Cancellation Timer" daemon prio=10 tid=0x00002aaaf81b8800 nid=0x447b in Object.wait() [0x00002aaaf6a22000] java.lang.Thread.State: WAITING (on object monitor) at java.lang.Object.wait(Native Method) - waiting on <0x00002aaab5556d50> (a java.util.TaskQueue) at java.lang.Object.wait(Object.java:485) at java.util.TimerThread.mainLoop(Timer.java:483) - locked <0x00002aaab5556d50> (a java.util.TaskQueue) at java.util.TimerThread.run(Timer.java:462) "Low Memory Detector" daemon prio=10 tid=0x00000000006a4000 nid=0x4479 runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE "CompilerThread1" daemon prio=10 tid=0x00000000006a1000 nid=0x4477 waiting on condition [0x0000000000000000] java.lang.Thread.State: RUNNABLE "CompilerThread0" daemon prio=10 tid=0x000000000069d000 nid=0x4476 waiting on condition [0x0000000000000000] java.lang.Thread.State: RUNNABLE "Signal Dispatcher" daemon prio=10 tid=0x000000000069b000 nid=0x4465 waiting on condition [0x0000000000000000] java.lang.Thread.State: RUNNABLE "Finalizer" daemon prio=10 tid=0x0000000000678800 nid=0x4464 in Object.wait() [0x00002aaaf61d6000] java.lang.Thread.State: WAITING (on object monitor) at java.lang.Object.wait(Native Method) - waiting on <0x00002aaab54a1cb8> (a java.lang.ref.ReferenceQueue$Lock) at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118) - locked <0x00002aaab54a1cb8> (a java.lang.ref.ReferenceQueue$Lock) at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134) at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159) "Reference Handler" daemon prio=10 tid=0x0000000000676800 nid=0x4463 in Object.wait() [0x00002aaaf60d5000] java.lang.Thread.State: WAITING (on object monitor) at java.lang.Object.wait(Native Method) - waiting on <0x00002aaab54a1cf0> (a java.lang.ref.Reference$Lock) at java.lang.Object.wait(Object.java:485) at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116) - locked <0x00002aaab54a1cf0> (a java.lang.ref.Reference$Lock) "main" prio=10 tid=0x0000000000614000 nid=0x445d runnable [0x0000000000000000] java.lang.Thread.State: RUNNABLE "VM Thread" prio=10 tid=0x0000000000670000 nid=0x4462 runnable "GC task thread#0 (ParallelGC)" prio=10 tid=0x000000000061e000 nid=0x445e runnable "GC task thread#1 (ParallelGC)" prio=10 tid=0x0000000000620000 nid=0x445f runnable "GC task thread#2 (ParallelGC)" prio=10 tid=0x0000000000622000 nid=0x4460 runnable "GC task thread#3 (ParallelGC)" prio=10 tid=0x0000000000623800 nid=0x4461 runnable "VM Periodic Task Thread" prio=10 tid=0x00000000006a6800 nid=0x447a waiting on condition JNI global references: 797 Heap PSYoungGen total 162944K, used 48388K [0x00002aaadff40000, 0x00002aaaf2ab0000, 0x00002aaaf5490000) eden space 102784K, 47% used [0x00002aaadff40000,0x00002aaae2e81170,0x00002aaae63a0000) from space 60160K, 0% used [0x00002aaaeb850000,0x00002aaaeb850000,0x00002aaaef310000) to space 86720K, 0% used [0x00002aaae63a0000,0x00002aaae63a0000,0x00002aaaeb850000) PSOldGen total 699072K, used 699072K [0x00002aaab5490000, 0x00002aaadff40000, 0x00002aaadff40000) object space 699072K, 100% used [0x00002aaab5490000,0x00002aaadff40000,0x00002aaadff40000) PSPermGen total 21248K, used 9252K [0x00002aaab0090000, 0x00002aaab1550000, 0x00002aaab5490000) object space 21248K, 43% used [0x00002aaab0090000,0x00002aaab09993e8,0x00002aaab1550000)

  Read the article

• CodePlex Daily Summary for Friday, March 19, 2010

  CodePlex Daily Summary for Friday, March 19, 2010New Projects[Tool] Vczh Visual Studio UnitTest Coverage Analyzer: Analyzing Visual Studio Unittest Coverage Exported XML filecrudwork is a library of reuseable classes for developing .NET applications: crudwork is a collection of reuseable .NET classes and features. If you searched for StpLibrary and landed here, you're in the right place. Origi...CWU Animated AVL Tree Tutorial: This is a silverlight demo of a self-balancing AVL tree. On the original team were CWU undergraduates Eric Brown, Barend Venter, Nick Rushton, Arry...DotNetNuke® Skin Modern: A DotNetNuke Design Challenge skin package submitted to the "Standards" category by Salar Golestanian of SalarO. The skin utilizes both the telerik...DotNetNuke® Skin Monster: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by Jon Edwards of SlumtownHero.co.za. This package uses totally tab...DotNetNuke® Skin Synapse: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by Exionyte Solutions. This package features 2 colors with 4...earthworm: Earthworm is a pet project intended as a repository of data access logic, including some ORM, state management and bridging the gap between connect...ema: EMA is a place for collaborative effort to implement a PowerGrid game engine. For more info on PowerGrid the board game see: http://www.boardgamege...Extended SharePoint Web Parts: Extending capabilities of existing SharePoint 2007 Web Parts by inheriting and alterFreedomCraft: Craft development siteG.B SecondLife Sculpter: This is a Sculptor for "secondlife"InfoPath Error Viewer: InfoPath Error Viewer provides an intuitive list to show all errors in the entire InfoPath form. You'll no longer have to find the validation error...LEET (LEET Enhances Exploratory Testing): LEET is a capture-replay tool based on Microsoft’s User Interface Automation Framework. It is targeted at agile teams, and provides support for us...Linq To Entity: Linq,Linq to Entity,EntityMACFBTest: This is a test for a Facebook application.MetaProperties: MetaProperties helps you to create event driven architectures in .NET. It saves you time and it helps you avoid mistakes. It's compatible with WPF ...ownztec web: projeto da ownztec.comParallel Programming Guide: Content for the latest patterns & practices book on design patterns for parallel programming. Downloadable book outline and draft chapters as well ...Perseus - Sistema de Matrícula On-Line: Sistema de matrícula desenvolvido pelo 5º período de Desenvolvimento Web da FACECLA.Project Tru Tiên: Project EL tru tiên, ZhuxianProSysPlus.Net Framework: How do I get the ease and efficiency of my work in VFP (R.I.P. 2010)? The answer is here: the ProSysPlus.Net Framework. Why is it open source? Wh...Quick Anime Renamer: Originally included with AniPlayer X, Quick Anime Renamer easily renames your anime files into a "cleaner" format so you wont get retinal detachment.Simple XNA Button: This is a project of a helper for instancing Simple Buttons in XNA with a ButtonPanel. Its got various features like. Load a Panel from a Plain Tex...SteelVersion - Monitor your .NET Application versioning: SteelVersion helps you to find and store versioning information about .NET assemblies ("Explorer" mode). It also makes it easier to continuously ch...Stellar Results: Astronomical Tracking System for IUPUI CSCI506 - Fall 2007, Team2TheHunterGetsTheDeer: first AIwandal: wandalWeb App Data Architect's CodeCAN: Contains different types of code samples to explore different types of technical solutions/patterns from an architect's point of view.Yet Another GPS: Yet another GPS tracker is a very powerful GPS track application for Windows MobileNew ReleasesASP.Net Client Dependency Framework: v1.0 RC1: ASP.Net Client Dependency has progressed to release candidate 1. With the community feedback and bug reports we've been able to make some great upd...C# FTP Library: FTPLib v1.0.1.1: This release has a couple of small bug fixes as well as the new abilities to specify a port to connect to and to create a new directory with the Cr...crudwork is a library of reuseable classes for developing .NET applications: crudwork 2.2.0.1: crudwork 2.2.0.1 (initial version)DotNetNuke® Skin Modern: Modern Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Standards" category by Salar Golestanian of SalarO. The skin utilizes both the telerik...DotNetNuke® Skinning Extensions: Nav Menu Demo Skins: This very basic skin demonstrates: 1. How to force NAV menu to generate an unordered list menu 2. The creation of a sub menu, both horizontal and ...DotNetNuke® XML: 04.03.05: XML/XSL Module 04.03.05 Release Candidate This is a maintainace release. Full Quallified Namespace avoids conflicts with Namespaces used by Teler...eCommerce by Onex Community Edition: Installer of eCommerce by Onex Community 1.0: Installer of eCommerce by Onex Community 1.0 Last changes: Added integration with Paypal Corrected of adding photos and attachments to products ...eCommerce by Onex Community Edition: Source code of eCommerce by Onex Community 1.0: Changes in version 1.0: Added integration with Paypal Corrected of adding photos and attachments to products Fixed problem with cancellation of...Employee Info Starter Kit: v2.2.0 (Visual Studio 2005-2008): This is a starter kit, which includes very simple user requirements, where we can create, read, update and delete (CRUD) the employee info of a com...Employee Info Starter Kit: v4.0.0.alpha (Visual Studio 2010): Employee Info Starter Kit is a ASP.NET based web application, which includes very simple user requirements, where we can create, read, update and d...Encrypted Notes: Encrypted Notes 1.4: This is the latest version of Encrypted Notes (1.4). It has an installer - it will create a directory 'CPascoe' in My Documents. Once you have ext...Extended SharePoint Web Parts: ContentQueryAdvanced: This .wsp file contains a single web part ContentQueryAdvanced. This web part inherits from ContentQuery web part and adds a ToolPart field for a ...Extended SharePoint Web Parts: Source Code: Zip file includes all the source code used to extend Content Query Web Part, adding a Tool Part field to insert a CAML query/filter/sortFacebook Developer Toolkit: Version 3.02: Updated copyright. No new functionality. Version 3.1 in the works.fleXdoc: template-based server-side document generator (docx): fleXdoc 1.0 (final): fleXdoc consists of a webservice and a (test)client for the service. Make sure you also download the testclient: you can use it to test the install...InfoPath Error Viewer: InfoPath Error Viewer 1.0: This is an intial version of this tool. You can: 1. View all errors in a list. 2. Locate to a binding control of an error field. 3. See the detai...LEET (LEET Enhances Exploratory Testing): LEET Alpha: The first public release of LEET includes the ability to record tests from running GUIs, assist in writing tests manually from a running GUI, edit ...Linq To Entity: Linq to Entity: The Entity Framework enables developers to work with data in the form of domain-specific objects and properties, such as customers and customer add...MDownloader: MDownloader-0.15.8.56699: Fixed peformance and memory usage. Fixed Letitbit provider. Added detecting IMDB, NFO, TV.com... links in RSS Monitor. Supported password len...MetaProperties: MetaProperties 1.0.0.0: This is a multi-targeted release of MetaProperties for the desktop and Silverlight versions of the .NET framework. The desktop version is fully ...Nito.KitchenSink: Version 2: Added a cancelable Stream.CopyTo. Depends on Nito.Linq 0.2. Please report any issues via the Issue Tracker.Project Server 2007 Timesheet AutoStatus Plus: AutoStatusPlus 1.0.1.0: AutoStatusPlus 1.0.1.0 Supported Systems x86 and x64 Project Server 2007 deployments with or without MOSS 2007 Recommended Patchlevels WSS 3.0: ...Project Tru Tiên: Elements-test V1: Mô tả Bản elements.data - có full ID của bản Elemens.data Tru tiên 2 VIệt Nam (V37) - có full ID của bản Elements.data server offline tru tiên (hiệ...Quick Anime Renamer: Quick Anime Renamer v0.1: AniPlayer X v1.4.5 - started 3/18/2010Initial Release!QuickieB2B: Quickie v1.0b: QuickieB2B - made for DEV4FUN competition organized by Microsoft CroatiaSilverlight 3.0 Advanced ToolTipService: Advanced ToolTipService v2.0.2: This release is compiled against the Silverlight 3.0 runtime. A demonstration on how to set the ToolTip content to a property of the DataContext o...Simple XNA Button: XNA Button 1.0: The Main Project. this uses XNA 3.0 but it can be build with lower versions of XNA Framework. This was made using Visual Studio 2008.StoryQ: StoryQ 2.0.3 Library and Converter UI: New features in this release: Tagging and a tag-capable rich html report. The code generator is capable of generating entire classes This relea...The Silverlight Hyper Video Player [http://slhvp.com]: Version 1.0: Version 1.0VCC: Latest build, v2.1.30318.0: Automatic drop of latest buildWord Index extracts words or sentences from Word document according to patterns: Word Index 1.0.1.0 (For Word 2007 and Word 2003): Word Index for Word 2007 & 2003 : WordIndex.msi (Win-Installer Setup for Word Index) Source code : wordindex.codeplex.comV1.0.1.0.zip : (Source co...Yet Another GPS: YAGPS-Alfa.1: Yet another GPS tracker is a very powerful GPS track application for Windows MobileMost Popular ProjectsMetaSharpRawrWBFS ManagerSilverlight ToolkitASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)ASP.NETMost Active ProjectsLINQ to TwitterRawrOData SDK for PHPjQuery Library for SharePoint Web ServicesDirectQOpen Data App Framework (ODAF)patterns & practices – Enterprise LibraryBlogEngine.NETPHPExcelNB_Store - Free DotNetNuke Ecommerce Catalog Module

  Read the article

• CodePlex Daily Summary for Thursday, October 27, 2011

  CodePlex Daily Summary for Thursday, October 27, 2011Popular ReleasesAcDown????? - Anime&Comic Downloader: AcDown????? v3.6: ?? ● AcDown??????????、??????，??????????????????????，???????Acfun、Bilibili、???、???、???、Tucao.cc、SF???、?????80????，???????????、?????????。 ● AcDown???????????????????????????，???，???????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ?? v3.6?? ??“????”...Facebook C# SDK: 5.3.1: This is a BETA release which adds new features and bug fixes to v5.2.1. removed dependency from Code Contracts enabled Task Parallel Support in .NET 4.0+ added support for early preview for .NET 4.5 added additional method overloads for .NET 4.5 to support IProgress<T> for upload progress added new CS-WinForms-AsyncAwait.sln sample demonstrating the use of async/await, upload progress report using IProgress<T> and cancellation support Query/QueryAsync methods uses graph api instead...SQL Backup Helper: SQL Backup Helper v1.0: Version 1.0 Changes Description added to settings table Automatic LOG files truncation added to BACKUP stored procedure Only database in status ONLINE will be backed upFlowton: Release 0.2: This release is the first official release of Flowton along with Source. Printpreview/Print is enabled with minor bug fixes from 0.1 alpha release locally.MySemanticSearch Sample: MySemanticSearch Installer (CTP3): Note: This release of the MySemanticSearch Sample works with SQL Server 2012 CTP3. Installation InstructionsDownload this self-extracting archive to your computer Execute the self-extracting archive Accept the licensing agreement Choose a target directory on your computer and extract the files Open Windows PowerShell command prompt with elevated priveleges Execute the following command: Set-ExecutionPolicy Unrestricted Close the Windows PowerShell command prompt Run C:\MySema...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.33: Add JSParser.ParseExpression method to parse JavaScript expressions rather than source-elements. Add -strict switch (CodeSettings.StrictMode) to force input code to ECMA5 Strict-mode (extra error-checking, "use strict" at top). Fixed bug when MinifyCode setting was set to false but RemoveUnneededCode was left it's default value of true.Path Copy Copy: 8.0: New version that mostly adds lots of requested features: 11340 11339 11338 11337 This version also features a more elaborate Settings UI that has several tabs. I tried to add some notes to better explain the use and purpose of the various options. The Path Copy Copy documentation is also on the way, both to explain how to develop custom plugins and to explain how to pre-configure options if you're a network admin. Stay tuned.MVC Controls Toolkit: Mvc Controls Toolkit 1.5.0: Added: The new Client Blocks feaure of Views A new "move" js method for the TreeViews The NewHtmlCreated js event to the DataGrid Improved the ChoiceList structure that now allows also the selection list of a dropdown to be chosen with a lambda expression Fixed: Issue with partial thrust Client handling of conditional attributes Bug in TreeView node moves that sometimes were not reflected on the server An issue in the Mvc3 Nuget package that wasn't able to uninstall properly ...Free SharePoint Master Pages: Buried Alive (Halloween) Theme: Release Notes *Created for Halloween, you will find theme file, custom css file and images. *Created by Al Roome @AlstarRoome Features: Custom styling for web part Custom background *Screenshot https://s3.amazonaws.com/kkhipple/post/sharepoint-showcase-halloween.pngDevForce Application Framework: DevForce AF 2.0.3 RTW: PrerequisitesWPF 4.0 Silverlight 4.0 DevForce 2010 6.1.3.1 Download ContentsDebug and Release Assemblies API Documentation Source code License.txt Requirements.txt Release HighlightsNew: EventAggregator event forwarding New: EntityManagerInterceptor<T> to intercept EntityManger events New: IHarnessAware to allow for ViewModel setup when executed inside of the Development Harness New: Improved design time stability New: Support for add-in development New: CoroutineFns.To...NicAudio: NicAudio 2.0.5: Minor change to accept special DTS stereo modes (LtRt, AB,...)Windows Azure Toolkit for Windows Phone: Windows Azure Toolkit for Windows Phone v1.3.1: Upgraded Windows Azure projects to Windows Azure Tools for Microsoft Visual Studio 2010 1.5 – September 2011 Upgraded the tools tools to support the Windows Phone Developer Tools RTW Update SQL Azure only scenarios to use ASP.NET Universal Providers (through the System.Web.Providers v1.0.1 NuGet package) Changed Shared Access Signature service interface to support more operations Refactored Blobs API to have a similar interface and usage to that provided by the Windows Azure SDK Stor...xUnit.net Contrib: xunitcontrib-resharper 0.4.4 (dotCover): xunitcontrib release 0.4.4 (ReSharper runner) This release provides a test runner plugin for Resharper 6.0 RTM, targetting all versions of xUnit.net. (See the xUnit.net project to download xUnit.net itself.) This release addresses the following issues:Support for dotCover code coverage 4132 Note that this build work against ALL VERSIONS of xunit. The files are compiled against xunit.dll 1.8 - DO NOT REPLACE THIS FILE. Thanks to xunit's version independent runner system, this package can r...BookShop: BookShop: BookShop WP7 clientRibbon Editor for Microsoft Dynamics CRM 2011: Ribbon Editor (0.1.2122.266): Added CodePlex and PayPal links New icon Bug fix: can't connect to an IFD deployment when the discovery service url has been customizedSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.0.921.340): Added CodePlex and PayPal links New iconDotNet.Framework.Common: DotNet.Framework.Common 4.0: ??????????，????????????XML Explorer: XML Explorer 4.0.5: Changes in 4.0.5: Added 'Copy Attribute XPath to Address Bar' feature. Added methods for decoding node text and value from Base64 encoded strings, and copying them to the clipboard. Added 'ChildNodeDefinitions' to the options, which allows for easier navigation of parent-child and ID-IDREF relationships. Discovery happens on-demand, as nodes are expanded and child nodes are added. Nodes can now have 'virtual' child nodes, defined by an xpath to select an identifier (usually relative to ...CODE Framework: 4.0.11021.0: This build adds a lot of our WPF components, including our MVVC and MVC components as well as a "Metro" and "Battleship" style.WiX Toolset: WiX v3.6 Beta: First beta release of WiX v3.6. The primary focus is on Burn but there are also many small bug fixes to the core toolset. For more information see: http://robmensching.com/blog/posts/2011/10/24/WiX-v3.6-Beta-releasedNew Projects5by5by4 Tic Tac Toe Project: 5by5by4 Tic Tac Toe project for CS 3420.ASP.Net Membership provider for MongoDb: A role and membership provider for ASP.Net with MongoDb as the database. Makes use of the Norm Linq provider for MongoDb.Bazookabird TFS Dashboard: Just a simple TFS dashboard. Show build results, tfs queries of your choice and display availability of build machines. Only a feature-lacking proof of concept yet, will hopefully be useful in the end. BestWebApp: Web service and web application.Code Made Simple: A group of projects to make coding life simple.DefenseXna: ??xna??Digibib.NET: Digibib.NET ist eine Portierung der Lesesoftware Digibux für die Digitale Bibliothek der Directmedia Publishing.FaceComparerDistributed: project of face compare distributed versionFMSSolution: FMSISO Analyzer: ISO Analyzer is a tool that makes it easier to analyze ISO 8583 financial transactions and also provides a platform to create a host simulator, capable of receiving requests and sending back the responses. It’s a WinForms application and it’s developed using C#.ITU Project: ITU Projekt - Víc než len klávesové skratky (navigace mezi bežicími aplikacemi)Maintenance Province Data: Help people find your project. Write a concise, reader-focused summary. Example: <project name> makes it easier for <target user group> to <activity>. You'll no longer have to <activity>. It's developed in <programming language>.m?ng chia s? công vi?c: m?ng chia s? công vi?cMetroTask: MetroTask, An example Metro based application using C#MyHomeFinance: Helps to add and keep a record of financeMySemanticSearch Sample: MySemanticSearch is a sample content management application that demonstrates semantic search capabilities introduced in SQL Server 2012. MySemanticSearch allows you to visualize tag clouds for content stored in FileTables and find similar content using semantic search.NetBlocks: This project is an implementation of the Unit-of-Work and Repository patterns using Entity Framework 4.1 and Unity. The project also includes code that can be used to initialize an application’s run-time environment from a set of components. The project includes example components for typed configuration settings, caching and a factory component based on Unity. Also included is an example of how to represent a database command with a C# class that transforms the results to typed objects.Online shopping website in ASP.NET- Open Source Project: asp.net,C#,shopping cart,college project,visual studio 2010,visual web developer 2010Pak Master: Pak Explorer for the fourth coming four.Pizza Service: A mvc3 project which aims to host both a backend webservice and a frontend page for ordering pizza and managing orders, customers and provide a drivermapScadaEveryWhere: ScadaEveryWhereSilverTwitterSearch: SilverTwitterSearch is a Siliverlight library for the Twitter Search API.Snst Salix: Salix is codename for custom solution of time management and task assignment software.SolutionManagementKit: SolutionManagementKit This product will try to combine several monitoring / support tools available right now. the primary focus will be on (T) SQL / MDX parsing for SQL 2008 R2 SSAS 2008 R2 as well as cube maintance Development in C# / VB .NETTarget: Blank Orchard Module: If enabled, outgoing links open in new window (just like with the deprecated target="_blank" attribute)WPPersonality: Psychological tests for windows phoneXrmLibrary: A base library to be used for rapid integration with one or more Microsoft Dynamics CRM 2011 environments. The XrmLibrary contains thread-safe singleton implementations of both the CRM IOrganizationService (1 or many instances) and a tracer/logger that utilizes Apache's log4net.

  Read the article

• Metro: Promises

  - by Stephen.Walther

  The goal of this blog entry is to describe the Promise class in the WinJS library. You can use promises whenever you need to perform an asynchronous operation such as retrieving data from a remote website or a file from the file system. Promises are used extensively in the WinJS library. Asynchronous Programming Some code executes immediately, some code requires time to complete or might never complete at all. For example, retrieving the value of a local variable is an immediate operation. Retrieving data from a remote website takes longer or might not complete at all. When an operation might take a long time to complete, you should write your code so that it executes asynchronously. Instead of waiting for an operation to complete, you should start the operation and then do something else until you receive a signal that the operation is complete. An analogy. Some telephone customer service lines require you to wait on hold – listening to really bad music – until a customer service representative is available. This is synchronous programming and very wasteful of your time. Some newer customer service lines enable you to enter your telephone number so the customer service representative can call you back when a customer representative becomes available. This approach is much less wasteful of your time because you can do useful things while waiting for the callback. There are several patterns that you can use to write code which executes asynchronously. The most popular pattern in JavaScript is the callback pattern. When you call a function which might take a long time to return a result, you pass a callback function to the function. For example, the following code (which uses jQuery) includes a function named getFlickrPhotos which returns photos from the Flickr website which match a set of tags (such as “dog” and “funny”): function getFlickrPhotos(tags, callback) { $.getJSON( "http://api.flickr.com/services/feeds/photos_public.gne?jsoncallback=?", { tags: tags, tagmode: "all", format: "json" }, function (data) { if (callback) { callback(data.items); } } ); } getFlickrPhotos("funny, dogs", function(data) { $.each(data, function(index, item) { console.log(item); }); }); The getFlickr() function includes a callback parameter. When you call the getFlickr() function, you pass a function to the callback parameter which gets executed when the getFlicker() function finishes retrieving the list of photos from the Flickr web service. In the code above, the callback function simply iterates through the results and writes each result to the console. Using callbacks is a natural way to perform asynchronous programming with JavaScript. Instead of waiting for an operation to complete, sitting there and listening to really bad music, you can get a callback when the operation is complete. Using Promises The CommonJS website defines a promise like this (http://wiki.commonjs.org/wiki/Promises): “Promises provide a well-defined interface for interacting with an object that represents the result of an action that is performed asynchronously, and may or may not be finished at any given point in time. By utilizing a standard interface, different components can return promises for asynchronous actions and consumers can utilize the promises in a predictable manner.” A promise provides a standard pattern for specifying callbacks. In the WinJS library, when you create a promise, you can specify three callbacks: a complete callback, a failure callback, and a progress callback. Promises are used extensively in the WinJS library. The methods in the animation library, the control library, and the binding library all use promises. For example, the xhr() method included in the WinJS base library returns a promise. The xhr() method wraps calls to the standard XmlHttpRequest object in a promise. The following code illustrates how you can use the xhr() method to perform an Ajax request which retrieves a file named Photos.txt: var options = { url: "/data/photos.txt" }; WinJS.xhr(options).then( function (xmlHttpRequest) { console.log("success"); var data = JSON.parse(xmlHttpRequest.responseText); console.log(data); }, function(xmlHttpRequest) { console.log("fail"); }, function(xmlHttpRequest) { console.log("progress"); } ) The WinJS.xhr() method returns a promise. The Promise class includes a then() method which accepts three callback functions: a complete callback, an error callback, and a progress callback: Promise.then(completeCallback, errorCallback, progressCallback) In the code above, three anonymous functions are passed to the then() method. The three callbacks simply write a message to the JavaScript Console. The complete callback also dumps all of the data retrieved from the photos.txt file. Creating Promises You can create your own promises by creating a new instance of the Promise class. The constructor for the Promise class requires a function which accepts three parameters: a complete, error, and progress function parameter. For example, the code below illustrates how you can create a method named wait10Seconds() which returns a promise. The progress function is called every second and the complete function is not called until 10 seconds have passed: (function () { "use strict"; var app = WinJS.Application; function wait10Seconds() { return new WinJS.Promise(function (complete, error, progress) { var seconds = 0; var intervalId = window.setInterval(function () { seconds++; progress(seconds); if (seconds > 9) { window.clearInterval(intervalId); complete(); } }, 1000); }); } app.onactivated = function (eventObject) { if (eventObject.detail.kind === Windows.ApplicationModel.Activation.ActivationKind.launch) { wait10Seconds().then( function () { console.log("complete") }, function () { console.log("error") }, function (seconds) { console.log("progress:" + seconds) } ); } } app.start(); })(); All of the work happens in the constructor function for the promise. The window.setInterval() method is used to execute code every second. Every second, the progress() callback method is called. If more than 10 seconds have passed then the complete() callback method is called and the clearInterval() method is called. When you execute the code above, you can see the output in the Visual Studio JavaScript Console. Creating a Timeout Promise In the previous section, we created a custom Promise which uses the window.setInterval() method to complete the promise after 10 seconds. We really did not need to create a custom promise because the Promise class already includes a static method for returning promises which complete after a certain interval. The code below illustrates how you can use the timeout() method. The timeout() method returns a promise which completes after a certain number of milliseconds. WinJS.Promise.timeout(3000).then( function(){console.log("complete")}, function(){console.log("error")}, function(){console.log("progress")} ); In the code above, the Promise completes after 3 seconds (3000 milliseconds). The Promise returned by the timeout() method does not support progress events. Therefore, the only message written to the console is the message “complete” after 10 seconds. Canceling Promises Some promises, but not all, support cancellation. When you cancel a promise, the promise’s error callback is executed. For example, the following code uses the WinJS.xhr() method to perform an Ajax request. However, immediately after the Ajax request is made, the request is cancelled. // Specify Ajax request options var options = { url: "/data/photos.txt" }; // Make the Ajax request var request = WinJS.xhr(options).then( function (xmlHttpRequest) { console.log("success"); }, function (xmlHttpRequest) { console.log("fail"); }, function (xmlHttpRequest) { console.log("progress"); } ); // Cancel the Ajax request request.cancel(); When you run the code above, the message “fail” is written to the Visual Studio JavaScript Console. Composing Promises You can build promises out of other promises. In other words, you can compose promises. There are two static methods of the Promise class which you can use to compose promises: the join() method and the any() method. When you join promises, a promise is complete when all of the joined promises are complete. When you use the any() method, a promise is complete when any of the promises complete. The following code illustrates how to use the join() method. A new promise is created out of two timeout promises. The new promise does not complete until both of the timeout promises complete: WinJS.Promise.join([WinJS.Promise.timeout(1000), WinJS.Promise.timeout(5000)]) .then(function () { console.log("complete"); }); The message “complete” will not be written to the JavaScript Console until both promises passed to the join() method completes. The message won’t be written for 5 seconds (5,000 milliseconds). The any() method completes when any promise passed to the any() method completes: WinJS.Promise.any([WinJS.Promise.timeout(1000), WinJS.Promise.timeout(5000)]) .then(function () { console.log("complete"); }); The code above writes the message “complete” to the JavaScript Console after 1 second (1,000 milliseconds). The message is written to the JavaScript console immediately after the first promise completes and before the second promise completes. Summary The goal of this blog entry was to describe WinJS promises. First, we discussed how promises enable you to easily write code which performs asynchronous actions. You learned how to use a promise when performing an Ajax request. Next, we discussed how you can create your own promises. You learned how to create a new promise by creating a constructor function with complete, error, and progress parameters. Finally, you learned about several advanced methods of promises. You learned how to use the timeout() method to create promises which complete after an interval of time. You also learned how to cancel promises and compose promises from other promises.

  Read the article

• CodePlex Daily Summary for Friday, October 21, 2011

  CodePlex Daily Summary for Friday, October 21, 2011Popular ReleasesCodekicker.BBCode: CodeKicker.BBCode-Parser-5.0: This is the best and newest version.Self-Tracking Entity Generator for WPF and Silverlight: Self-Tracking Entity Generator v 0.9.9: Self-Tracking Entity Generator v 0.9.9 for Entity Framework 4.0Umbraco CMS: Umbraco 5.0 CMS Alpha 3: Umbraco 5 Alpha 3Umbraco 5 (aka Jupiter) will be the next version of everyone's favourite, friendly ASP.NET CMS that already powers over 100,000 websites worldwide. Try out the Alpha of v5 today! If you're new to Umbraco and would like to get a low-down on our popular and easy-to-learn approach to content management, check out our intro video. What's Alpha 3?This is our third Alpha release. It's intended for developers looking to become familiar with the codebase & architecture, or for thos...thinktecture IdentityServer: IdentityServer RC: This is the RC of Thinktecture.IdentityServerWebForms.ControlExtender: WebForms.ControlExtender 1.0.0.0 (binary): Initial release.Windows Phone 7 Skydrive Library: Skydrive WP7 rel. 1: Till the Rest Api gets out of beta you can use this release You can: - browse the folders -download files It uses WebDAVVkontakte WP: Vkontakte: source codeDotNet.Framework.Common: DotNetFramework.Common?????: DotNetFramework.Common?????Way2Sms Applications for Android, Desktop/Laptop & Java enabled phones: Way2SMS Desktop App v2.0: 1. Fixed issue with sending messages due to changes to Way2Sms site 2. Updated the character limit to 160 from 140GART - Geo Augmented Reality Toolkit: 1.0.1: About Release 1.0.1 Release 1.0.1 is a service release that addresses several issues and improves performance. As always, check the Documentation tab for instructions on how to get started. If you don't have the Windows Phone SDK yet, grab it here. Breaking Change Please note: There is a breaking change in this release. As noted below, the WorldCalculationMode property of ARItem has been replaced by a user-definable function. ARItem is now automatically wired up with a function that perform...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.32: Fix for issue #16710 - string literals in "constant literal operations" which contain ASP.NET substitutions should not be considered "constant." Move the JS1284 error (Misplaced Function Declaration) so it only fires when in strict mode. I got a couple complaints that people didn't like that error popping up in their existing code when they could verify that the location of that function, although not strict JS, still functions as expected cross-browser.Naked Objects: Naked Objects Release 4.0.110.0: Corresponds to the packaged version 4.0.110.0 available via NuGet. Please note that the easiest way to install and run the Naked Objects Framework is via the NuGet package manager: just search the Official NuGet Package Source for 'nakedobjects'. It is only necessary to download the source code (from here) if you wish to modify or re-build the framework yourself. If you do wish to re-build the framework, consul the file HowToBuild.txt in the release. Documentation Please note that after ...myCollections: Version 1.5: New in this version : Added edit type for selected elements Added clean for selected elements Added Amazon Italia Added Amazon China Added TVDB Italia Added TVDB China Added Turkish language You can now manually add artist Added Order by Rating Improved Add by Media Improved Artist Detail Upgrade Sqlite engine View, Zoom, Grouping, Filter are now saved by category Added group by Artist Added CubeCover View BugFixingFacebook C# SDK: 5.3: This is a BETA release which adds new features and bug fixes to v5.2.1. removed dependency from Code Contracts enabled Task Parallel Support in .NET 4.0+ added support for early preview for .NET 4.5 added additional method overloads for .NET 4.5 to support IProgress<T> for upload progress added new CS-WinForms-AsyncAwait.sln sample demonstrating the use of async/await, upload progress report using IProgress<T> and cancellation support Query/QueryAsync methods uses graph api instead...IronPython: 2.7.1 RC: This is the first release candidate of IronPython 2.7.1. Like IronPython 54498, this release requires .NET 4 or Silverlight 4. This release will replace any existing IronPython installation. If there are no showstopping issues, this will be the only release candidate for 2.7.1, so please speak up if you run into any roadblocks. The highlights of 2.7.1 are: Updated the standard library to match CPython 2.7.2. Add the ast, csv, and unicodedata modules. Fixed several bugs. IronPython To...Rawr: Rawr 4.2.6: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...Home Access Plus+: v7.5: Change Log: New Booking System (out of Beta) New Help Desk (out of Beta) New My Files (Developer Preview) Token now saved into Cookie so the system doesn't TIMEOUT as much File Changes: ~/bin/hap.ad.dll ~/bin/hap.web.dll ~/bin/hap.data.dll ~/bin/hap.web.configuration.dll ~/bookingsystem/admin/default.aspx ~/bookingsystem/default.aspx REMOVED ~/bookingsystem/bookingpopup.ascx REMOVED ~/bookingsystem/daylist.ascx REMOVED ~/bookingsystem/new.aspx ~/helpdesk/default.aspx ...Visual Micro - Arduino for Visual Studio: Arduino for Visual Studio 2008 and 2010: Arduino for Visual Studio 2010 has been extended to support Visual Studio 2008. The same functionality and configuration exists between the two versions. The 2010 addin runs .NET4 and the 2008 addin runs .NET3.5, both are installed using a single msi and both share the same configuration settings. The only known issue in 2008 is that the button and menu icons are missing. Please logon to the visual micro forum and let us know if things are working or not. Read more about this Visual Studio ...DotSpatial: Release: Moved IExtension to a separate assembly.Phalanger - The PHP Language Compiler for the .NET Framework: 2.1 (October 2011) for .NET 4.0: October 2011 release of Phalanger - the PHP compiler for .NET 4.0 - introduces following: Performance enhancements several duplicitous runtime checks omitted New functionality 31586 __toString() magic method compile time check hash_update_stream() supports second argument Issue fixes 31455 PCRE named groups addcslashes() with second argument fix 31577 31575, 31567 31566 31484 Note if you need Phalanger running on .NET 2.0, please use Phalanger 2.0. For the full list of cha...New Projects#foo SqlServer: Useful Sql Server extensionsBaufQuery: Material de la presentación que voy a realizar en Baufest sobre jQueryBoringColorPicker: A simple color picker i created on a busy Saturday morning, and i couldn't stress myself calculating color codes. I hope someone finds it useful. Developed in c#, for desktop use.Charity Social Network1: ????? ??? ?????? ??? ?????2 devianARTGallery: <devianART Gallery> makes it easier for <artist, graphic designer, art, web designer, interface design> to<following news images, graphics, vectors and new resouces for your needs at this application in your hands>. It's developing in<C# windows phone 7>Diving: MVC Application for testingDotNet.Framework.Common: .NET ??????????Drama-AddictFeed: Retrieve feed a top siteDuckWorld: Logica architect courseEasy Monitor: ??ASP.NET_MVC4???????????????，????。 Server, Monitoring, ASP.net, mvc, mvc4, svg, vml, KVDB, WebsiteEvent_Manager: Event Manager V 2FETCH! Go Fetch that remote task. Good task doogie!: Email sent, task accomplished. This little task execution agent can be a remote domain support's best friend. Save time on late night and off hours administration tasks. When there is no time to RDP, send Fetch an email and he'll take care of it quick. Secure, reliable. InQuestaRed UTN: Proyecto de UTNInsert from Windows Live Image Search: Allows you to do an image search using Windows Live Search and put the resulting image into a blog entry.ioak: iOakLibertyJournal free diary journal software: LibertyJournal - A freeware personal diary software/journal software/program, could become your personal digital diary and journal software to record your daily events and memories, in your creative words. Runs on Desktop PCs, and Netbooks too.memcachedext - .NET library: A .NET library providing support for advanced caching scenarios, including memcached server.myWebfetion: my web fetionNuMetaheuristics: NuMetaheuristics is a general framework for optimization developed in C#. It is capable of supporting any optimization paradigm (local search, naturally inspired, multi-objective, etc.). It supports extensions to allow for new genotypes, operators, and algorithms.Oil Prices: Application about Thailand's oil pricesOnline Ontology Editor: Online Ontology BuilderOrchard Documentation: Orchard Documentation repository.QuipuxConnector: QuipuxConnector es el primer Addins para word que permite enviar documentos a QuipuxSignature Recognition: An application that authenticates scanned signature images.SmartFramework: SmartFramework là n?n t?ng xây d?ng các h? th?ng l?n connect t?i các ngu?n CSDL khác nhau, d?c bi?t là các h? th?ng online, real-time.smartKin: Studienarbeit TIT 09 - Kinect / Robotik Zum räumlichen Sehen von Robotern mit Kinect: Initiale Experimente für 3D-Szenen Rekonstruktion, Steuerung durch natürliche GestenTAudioPlayer: TAudioPlayer would take more facility in your aural comprehension exercise. It most conspicuous function is comfortably add time-tags to an audio file which is playing and you can jump to the position you defined easily. It also provides various hotkey setting and you can define most of the operation hotkey by yourself. The project is developed in C# with Visual Studio 2010.Watin - TestEasy: WatiN - TestEasy is the idea to make WatiN based test generation and excution easier. Mainly it will provide interface to data driven automation using WatiN.WebForms.ControlExtender: WebForms.ControlExtender simplify the creation of components which extend (or adds) their own properties to other controls or components in the Visual Studio ASP.NET designer.Windows Phone 7 Skydrive Library: Use this library if you need to access Skydrive from Windows PhonezDBA: SQL Server 2008 tookit!

  Read the article

• Faster, Simpler access to Azure Tables with Enzo Azure API

  - by Herve Roggero

  After developing the latest version of Enzo Cloud Backup I took the time to create an API that would simplify access to Azure Tables (the Enzo Azure API). At first, my goal was to make the code simpler compared to the Microsoft Azure SDK. But as it turns out it is also a little faster; and when using the specialized methods (the fetch strategies) it is much faster out of the box than the Microsoft SDK, unless you start creating complex parallel and resilient routines yourself. Last but not least, I decided to add a few extension methods that I think you will find attractive, such as the ability to transform a list of entities into a DataTable. So let’s review each area in more details. Simpler Code My first objective was to make the API much easier to use than the Azure SDK. I wanted to reduce the amount of code necessary to fetch entities, remove the code needed to add automatic retries and handle transient conditions, and give additional control, such as a way to cancel operations, obtain basic statistics on the calls, and control the maximum number of REST calls the API generates in an attempt to avoid throttling conditions in the first place (something you cannot do with the Azure SDK at this time). Strongly Typed Before diving into the code, the following examples rely on a strongly typed class called MyData. The way MyData is defined for the Azure SDK is similar to the Enzo Azure API, with the exception that they inherit from different classes. With the Azure SDK, classes that represent entities must inherit from TableServiceEntity, while classes with the Enzo Azure API must inherit from BaseAzureTable or implement a specific interface. // With the SDK public class MyData1 : TableServiceEntity {     public string Message { get; set; }     public string Level { get; set; }     public string Severity { get; set; } } //  With the Enzo Azure API public class MyData2 : BaseAzureTable {     public string Message { get; set; }     public string Level { get; set; }     public string Severity { get; set; } } Simpler Code Now that the classes representing an Azure Table entity are defined, let’s review the methods that the Azure SDK would look like when fetching all the entities from an Azure Table (note the use of a few variables: the _tableName variable stores the name of the Azure Table, and the ConnectionString property returns the connection string for the Storage Account containing the table): // With the Azure SDK public List<MyData1> FetchAllEntities() {      CloudStorageAccount storageAccount = CloudStorageAccount.Parse(ConnectionString);      CloudTableClient tableClient = storageAccount.CreateCloudTableClient();      TableServiceContext serviceContext = tableClient.GetDataServiceContext();      CloudTableQuery<MyData1> partitionQuery =         (from e in serviceContext.CreateQuery<MyData1>(_tableName)         select new MyData1()         {            PartitionKey = e.PartitionKey,            RowKey = e.RowKey,            Timestamp = e.Timestamp,            Message = e.Message,            Level = e.Level,            Severity = e.Severity            }).AsTableServiceQuery<MyData1>();        return partitionQuery.ToList();  } This code gives you automatic retries because the AsTableServiceQuery does that for you. Also, note that this method is strongly-typed because it is using LINQ. Although this doesn’t look like too much code at first glance, you are actually mapping the strongly-typed object manually. So for larger entities, with dozens of properties, your code will grow. And from a maintenance standpoint, when a new property is added, you may need to change the mapping code. You will also note that the mapping being performed is optional; it is desired when you want to retrieve specific properties of the entities (not all) to reduce the network traffic. If you do not specify the properties you want, all the properties will be returned; in this example we are returning the Message, Level and Severity properties (in addition to the required PartitionKey, RowKey and Timestamp). The Enzo Azure API does the mapping automatically and also handles automatic reties when fetching entities. The equivalent code to fetch all the entities (with the same three properties) from the same Azure Table looks like this: // With the Enzo Azure API public List<MyData2> FetchAllEntities() {        AzureTable at = new AzureTable(_accountName, _accountKey, _ssl, _tableName);        List<MyData2> res = at.Fetch<MyData2>("", "Message,Level,Severity");        return res; } As you can see, the Enzo Azure API returns the entities already strongly typed, so there is no need to map the output. Also, the Enzo Azure API makes it easy to specify the list of properties to return, and to specify a filter as well (no filter was provided in this example; the filter is passed as the first parameter).  Fetch Strategies Both approaches discussed above fetch the data sequentially. In addition to the linear/sequential fetch methods, the Enzo Azure API provides specific fetch strategies. Fetch strategies are designed to prepare a set of REST calls, executed in parallel, in a way that performs faster that if you were to fetch the data sequentially. For example, if the PartitionKey is a GUID string, you could prepare multiple calls, providing appropriate filters ([‘a’, ‘b’[, [‘b’, ‘c’[, [‘c’, ‘d[, …), and send those calls in parallel. As you can imagine, the code necessary to create these requests would be fairly large. With the Enzo Azure API, two strategies are provided out of the box: the GUID and List strategies. If you are interested in how these strategies work, see the Enzo Azure API Online Help. Here is an example code that performs parallel requests using the GUID strategy (which executes more than 2 t o3 times faster than the sequential methods discussed previously): public List<MyData2> FetchAllEntitiesGUID() {     AzureTable at = new AzureTable(_accountName, _accountKey, _ssl, _tableName);     List<MyData2> res = at.FetchWithGuid<MyData2>("", "Message,Level,Severity");     return res; } Faster Results With Sequential Fetch Methods Developing a faster API wasn’t a primary objective; but it appears that the performance tests performed with the Enzo Azure API deliver the data a little faster out of the box (5%-10% on average, and sometimes to up 50% faster) with the sequential fetch methods. Although the amount of data is the same regardless of the approach (and the REST calls are almost exactly identical), the object mapping approach is different. So it is likely that the slight performance increase is due to a lighter API. Using LINQ offers many advantages and tremendous flexibility; nevertheless when fetching data it seems that the Enzo Azure API delivers faster.  For example, the same code previously discussed delivered the following results when fetching 3,000 entities (about 1KB each). The average elapsed time shows that the Azure SDK returned the 3000 entities in about 5.9 seconds on average, while the Enzo Azure API took 4.2 seconds on average (39% improvement). With Fetch Strategies When using the fetch strategies we are no longer comparing apples to apples; the Azure SDK is not designed to implement fetch strategies out of the box, so you would need to code the strategies yourself. Nevertheless I wanted to provide out of the box capabilities, and as a result you see a test that returned about 10,000 entities (1KB each entity), and an average execution time over 5 runs. The Azure SDK implemented a sequential fetch while the Enzo Azure API implemented the List fetch strategy. The fetch strategy was 2.3 times faster. Note that the following test hit a limit on my network bandwidth quickly (3.56Mbps), so the results of the fetch strategy is significantly below what it could be with a higher bandwidth. Additional Methods The API wouldn’t be complete without support for a few important methods other than the fetch methods discussed previously. The Enzo Azure API offers these additional capabilities: - Support for batch updates, deletes and inserts - Conversion of entities to DataRow, and List<> to a DataTable - Extension methods for Delete, Merge, Update, Insert - Support for asynchronous calls and cancellation - Support for fetch statistics (total bytes, total REST calls, retries…) For more information, visit http://www.bluesyntax.net or go directly to the Enzo Azure API page (http://www.bluesyntax.net/EnzoAzureAPI.aspx). About Herve Roggero Herve Roggero, Windows Azure MVP, is the founder of Blue Syntax Consulting, a company specialized in cloud computing products and services. Herve's experience includes software development, architecture, database administration and senior management with both global corporations and startup companies. Herve holds multiple certifications, including an MCDBA, MCSE, MCSD. He also holds a Master's degree in Business Administration from Indiana University. Herve is the co-author of "PRO SQL Azure" from Apress and runs the Azure Florida Association (on LinkedIn: http://www.linkedin.com/groups?gid=4177626). For more information on Blue Syntax Consulting, visit www.bluesyntax.net.

  Read the article

• Understanding the value of Customer Experience & Loyalty for the Telecommunications Industry

  - by raul.goycoolea

  Worried by economic woes and market forces, especially in mature markets, communications service providers (CSPs) increasingly focus on improving customer experience. In fact, it seems difficult to find a major message by a C-level executive in the developed world that does not include something on "meeting and exceeding customers' needs". Frequently in customer satisfaction studies by prominent firms, CSPs fall short of the leadership demonstrated by other industries that take customer-centric approaches to their bottom-line strategies. Consider the following:Despite the continued impact of global economic crisis, in July 2010, Apple Computer posted record revenue and net quarterly profit. Those who attribute the results primarily to the iPhone 4 launch should note that Apple also shipped around 30% more Macintosh computers than the same period the previous year. Even sales of the iPod line increased by 8% in a highly commoditized, shrinking media player market. Finally, Apple began selling iPads during the quarter, with total sales of more than 3 million units. What does Apple have that the others lack? Well, some great products (and services) to be sure, but it also excels at customer service and support, marketing, and distribution, and has one of the strongest brands globally. Its products are useful, simple to use, easy to acquire and augment, high quality, and considered very cool. They also evoke such an emotional response from many of Apple's customers, which they turn up their noses at competitive products.In other words, Apple appears to have mastered virtually every aspect of customer experience and the resultant loyalty of its customer base - even in difficult financial times. Through that unwavering customer focus, Apple continues to drive its revenues and profits to new heights. Other customer loyalty leaders like Wal-Mart, Google, Toyota and Honda are also doing well by focusing on customer experience as an essential driver of profitability. Service providers should note this performance and ask themselves how they might leverage the same principles to increase their own profitability. After all, that is what customer experience and loyalty are all about: profitability.To successfully manage all the critical touch points of customer experience, CSPs must shun the one-size-fits-all approach. They can no longer afford to view customer service fundamentally as an act of altruism - which mentality dates back to the industry's civil service days, when CSPs were typically government organizations that were critical to economic development and public safety.As regulators and public officials have pushed, and continue to push, service providers to new heights of reliability - using incentives and punishments - most CSPs already have some of the fundamental building blocks of customer service in place. Yet despite that history and experience, service providers still lag other industries in providing what is seen as good customer service.As we observed in the TMF's 2009 Insights Research report, Customer Experience Management: Driving Loyalty & Profitability there has been resurgence in interest by CSPs. More and more of them have stated ambitions to catch up other industries, and they are realizing that good customer service is a powerful strategy for increasing business performance and profitability, not an act of good will.CSPs are recognizing the connection between customer experience and profitability, as demonstrated in many studies. For example, according to research by Bain & Company, a 5 percent improvement in customer retention rates can yield as much as a 75 percent increase in profits for companies across a range of industries.After decades of customer experience strategy formulation, Bain partner and business author, Frederick Reichheld, considers "would you recommend us to a friend?" as the ultimate question for a customer. How many times have you or your friends recommended an iPod, iPhone or a Mac? What do your children recommend to their peers? Their peers to them?There are certain steps service providers have to take to create more personalized relationships with their customers, as well as reduce churn and increase profitability, all while becoming leaner and more agile. First, they have to define customer experience, we define it as the result of the sum of observations, perceptions, thoughts and feelings arising from interactions and relationships between customers and their service provider(s). Virtually every customer touch point - whether directly or indirectly linked to service providers and their partners - contributes to customer perception, satisfaction, loyalty, and ultimately profitability. Gaining leadership in customer experience and satisfaction will not be a simple task, as it is affected by virtually every customer-facing aspect of the service provider, and in turn impacts the service provider deeply - especially on the all-important bottom line. The scope of issues affecting customer experience is complex and dynamic.With new services, devices and applications extending the basis of customer experience to domains beyond the direct control of the service provider, it is likely to increase in complexity and dynamism.Customer loyalty = increased profitsAs stated earlier, customer experience programs are not fundamentally altruistic exercises, but a strategic means of improving competitiveness and profitability in the short and long term. Loyalty is essential to deriving long term profits from customers.Some of the earliest loyalty programs date back to the 1930s, when packaged goods companies offered embedded coupons for rewards to buyers, and eventually retail chains began offering reward programs to frequent shoppers. These programs continued for decades but were leapfrogged in the 1980s by more aggressive programs from the airlines.This movement was led by American Airlines, which launched the first full-scale loyalty marketing program of the modern era with the AAdvantage frequent flyer scheme. It was the first to reward frequent fliers with notional air miles that could be accumulated and later redeemed for free travel. Figure 1: Opportunities example of Customer loyalty driven profitOther airlines and travel providers were quick to grasp the incredible value of providing customers with an incentive to use their company exclusively. Within a few years, dozens of travel industry companies launched similar initiatives and now loyalty programs are achieving near-ubiquity in many service industries, especially those in which it is difficult to differentiate offerings by product attributes.The belief is that increased profitability will result from customer retention efforts because:•    The cost of acquisition occurs only at the beginning of a relationship: the longer the relationship, the lower the amortized cost;•    Account maintenance costs decline as a percentage of total costs, or as a percentage of revenue, over the lifetime of the relationship;•    Long term customers tend to be less inclined to switch and less price sensitive which can result in stable unit sales volume and increases in dollar-sales volume;•    Long term customers may initiate word-of-mouth promotions and referrals, which cost the company nothing and arguably are the most effective form of advertising;•    Long-term customers are more likely to buy ancillary products and higher margin supplemental products;•    Long term customers tend to be satisfied with their relationship with the company and are less likely to switch to competitors, making market entry or competitors gaining market share difficult;•    Regular customers tend to be less expensive to service, as they are familiar with the processes involved, require less 'education', and are consistent in their order placement;•    Increased customer retention and loyalty makes the employees' jobs easier and more satisfying. In turn, happy employees feed back into higher customer satisfaction in a virtuous circle. Figure 2: The virtuous circle of customer loyaltyFigure 2 represents a high-level example of a virtuous cycle driven by customer satisfaction and loyalty, depicting how superiority in product and service offerings, as well as strong customer support by competent employees, lead to higher sales and ultimately profitability. As stated above, this is not a new concept, but succeeding with it is difficult. It has eluded many a company driven to achieve profitability goals. Of course, for this circle to be virtuous, the customer relationship(s) must be profitable.Trying to maintain the loyalty of unprofitable customers is not a viable business strategy. It is, therefore, important that marketers can assess the profitability of each customer (or customer segment), and either improve or terminate relationships that are not profitable. This means each customer's 'relationship costs' must be understood and compared to their 'relationship revenue'. Customer lifetime value (CLV) is the most commonly used metric here, as it is generally accepted as a representation of exactly how much each customer is worth in monetary terms, and therefore a determinant of exactly how much a service provider should be willing to spend to acquire or retain that customer.CLV models make several simplifying assumptions and often involve the following inputs:•    Churn rate represents the percentage of customers who end their relationship with a company in a given period;•    Retention rate is calculated by subtracting the churn rate percentage from 100;•    Period/horizon equates to the units of time into which a customer relationship can be divided for analysis. A year is the most commonly used period for this purpose. Customer lifetime value is a multi-period calculation, often projecting three to seven years into the future. In practice, analysis beyond this point is viewed as too speculative to be reliable. The model horizon is the number of periods used in the calculation;•    Periodic revenue is the amount of revenue collected from a customer in a given period (though this is often extended across multiple periods into the future to understand lifetime value), such as usage revenue, revenues anticipated from cross and upselling, and often some weighting for referrals by a loyal customer to others; •    Retention cost describes the amount of money the service provider must spend, in a given period, to retain an existing customer. Again, this is often forecast across multiple periods. Retention costs include customer support, billing, promotional incentives and so on;•    Discount rate means the cost of capital used to discount future revenue from a customer. Discounting is an advanced method used in more sophisticated CLV calculations;•    Profit margin is the projected profit as a percentage of revenue for the period. This may be reflected as a percentage of gross or net profit. Again, this is generally projected across the model horizon to understand lifetime value.A strong focus on managing these inputs can help service providers realize stronger customer relationships and profits, but there are some obstacles to overcome in achieving accurate calculations of CLV, such as the complexity of allocating costs across the customer base. There are many costs that serve all customers which must be properly allocated across the base, and often a simple proportional allocation across the whole base or a segment may not accurately reflect the true cost of serving that customer;  This is made worse by the fragmentation of customer information, which is likely to be across a variety of product or operations groups, and may be difficult to aggregate due to different representations.In addition, there is the complexity of account relationships and structures to take into consideration. Complex account structures may not be understood or properly represented. For example, a profitable customer may have a separate account for a second home or another family member, which may appear to be unprofitable. If the service provider cannot relate the two accounts, CLV is not properly represented and any resultant cancellation of the apparently unprofitable account may result in the customer churning from the profitable one.In summary, if service providers are to realize strong customer relationships and their attendant profits, there must be a very strong focus on data management. This needs to be coupled with analytics that help business managers and those who work in customer-facing functions offer highly personalized solutions to customers, while maintaining profitability for the service provider. It's clear that acquiring new customers is expensive. Advertising costs, campaign management expenses, promotional service pricing and discounting, and equipment subsidies make a serious dent in a new customer's profitability. That is especially true given the rising subsidies for Smartphone users, which service providers hope will result in greater profits from profits from data services profitability in future.  The situation is made worse by falling prices and greater competition in mature markets.Customer acquisition through industry consolidation isn't cheap either. A North American service provider spent about $2,000 per subscriber in its acquisition of a smaller company earlier this year. While this has allowed it to leapfrog to become the largest mobile service provider in the country, it required a total investment of more than $28 billion (including assumption of the acquiree's debt).While many operating cost synergies clearly made this deal more attractive to the acquiring company, this is certainly an expensive way to acquire customers: the cost per subscriber in this case is not out of line with the prices others have paid for acquisitions.While growth by acquisition certainly increases overall revenues, it often creates tremendous challenges for profitability. Organic growth through increased customer loyalty and retention is a more effective driver of profit, as well as a stronger predictor of future profitability. Service providers, especially those in mature markets, are increasingly recognizing this and taking steps toward a creating a more personalized, flexible and satisfying experience for their customers.In summary, the clearest path to profitability for companies in virtually all industries is through customer retention and maximization of lifetime value. Service providers would do well to recognize this and focus attention on profitable customer relationships.

  Read the article

• AIX Checklist for stable obiee deployment

  - by user554629

  Common AIX configuration issues     ( last updated 27 Aug 2012 ) OBIEE is a complicated system with many moving parts and connection points.The purpose of this article is to provide a checklist to discuss OBIEE deployment with your systems administrators. The information in this article is time sensitive, and updated as I discover new  issues or details. What makes OBIEE different? When Tech Support suggests AIX component upgrades to a stable, locked-down production AIX environment, it is common to get "push back".  "Why is this necessary?  We aren't we seeing issues with other software?"It's a fair question that I have often struggled to answer; here are the talking points: OBIEE is memory intensive.  It is the entire purpose of the software to trade memory for repetitive, more expensive database requests across a network. OBIEE is implemented in C++ and is very dependent on the C++ runtime to behave correctly. OBIEE is aggressively thread efficient;  if atomic operations on a particular architecture do not work correctly, the software crashes. OBIEE dynamically loads third-party database client libraries directly into the nqsserver process.  If the library is not thread-safe, or corrupts process memory the OBIEE crash happens in an unrelated part of the code.  These are extremely difficult bugs to find. OBIEE software uses 99% common source across multiple platforms:  Windows, Linux, AIX, Solaris and HPUX.  If a crash happens on only one platform, we begin to suspect other factors.  load intensity, system differences, configuration choices, hardware failures.  It is rare to have a single product require so many diverse technical skills.   My role in support is to understand system configurations, performance issues, and crashes.   An analyst trained in Business Analytics can't be expected to know AIX internals in the depth required to make configuration choices.  Here are some guidelines. AIX C++ Runtime must be at  version 11.1.0.4$ lslpp -L | grep xlC.aixobiee software will crash if xlC.aix.rte is downlevel;  this is not a "try it" suggestion.Nov 2011 11.1.0.4 version  is appropriate for all AIX versions ( 5, 6, 7 )Download from here:https://www-304.ibm.com/support/docview.wss?uid=swg24031426 No reboot is necessary to install, it can even be installed while applications are using the current version.Restart the apps, and they will pick up the latest version. AIX 5.3 Technology Level 12 is required when running on Power5,6,7 processorsAIX 6.1 was introduced with the newer Power chips, and we have seen no issues with 6.1 or 7.1 versions.Customers with an unstable deployment, dozens of unexplained crashes, became stable after the upgrade.If your AIX system is 5.3, the minimum TL level should be at or higher than this:$ oslevel -s  5300-12-03-1107IBM typically supports only the two latest versions of AIX ( 6.1 and 7.1, for example).  AIX 5.3 is still supported and popular running in an LPAR. obiee userid limits$ ulimit -Ha  ( hard limits )$ ulimit -a   ( default limits )core file size (blocks)     unlimiteddata seg size (kbytes)      unlimitedfile size (blocks)          unlimitedmax memory size (kbytes)    unlimitedopen files                  10240 cpu time (seconds)          unlimitedvirtual memory (kbytes)     unlimitedIt is best to establish the values in /etc/security/limitsroot user is needed to observe and modify this file.If you modify a limit, you will need to relog in to change it again.  For example,$ ulimit -c 0$ ulimit -c 2097151cannot modify limit: Operation not permitted$ ulimit -c unlimited$ ulimit -c0There are only two meaningful values for ulimit -c ; zero or unlimited.Anything else is likely to produce a truncated core file that cannot be analyzed. Deploy 32-bit or 64-bit ?Early versions of OBIEE offered 32-bit or 64-bit choice to AIX customers.The 32-bit choice was needed if a database vendor did not supply a 64-bit client library.That's no longer an issue and beginning with OBIEE 11, 32-bit code is no longer shipped.A common error that leads to "out of memory" conditions to to accept the 32-bit memory configuration choices on 64-bit deployments.  The significant configuration choices are: Maximum process data (heap) size is in an AIX environment variableLDR_CNTRL=IGNOREUNLOAD@LOADPUBLIC@PREREAD_SHLIB@MAXDATA=0x... Two thread stack sizes are made in obiee NQSConfig.INI[ SERVER ]SERVER_THREAD_STACK_SIZE = 0;DB_GATEWAY_THREAD_STACK_SIZE = 0; Sort memory in NQSConfig.INI[ GENERAL ]SORT_MEMORY_SIZE = 4 MB ;SORT_BUFFER_INCREMENT_SIZE = 256 KB ; Choosing a value for MAXDATA:0x080000000  2GB Default maximum 32-bit heap size ( 8 with 7 zeros )0x100000000  4GB 64-bit breaking even with 32-bit ( 1 with 8 zeros )0x200000000  8GB 64-bit double 32-bit max0x400000000 16GB 64-bit safetyUsing 2GB heap size for a 64-bit process will almost certainly lead to an out-of-memory situation.Registers are twice as big ... consume twice as much memory in the heap.Upgrading to a 4GB heap for a 64-bit process is just "breaking even" with 32-bit.A 32-bit process is constrained by the 32-bit virtual addressing limits.  Heap memory is used for dynamic requirements of obiee software, thread stacks for each of the configured threads, and sometimes for shared libraries. 64-bit processes are not constrained in this way;  extra heap space can be configured for safety against a query that might create a sudden requirement for excessive storage.  If the storage is not available, this query might crash the whole server and disrupt existing users.There is no performance penalty on AIX for configuring more memory than required;  extra memory can be configured for safety.  If there are no other considerations, start with 8GB.Choosing a value for Thread Stack size:zero is the value documented to select an appropriate default for thread stack size.  My preference is to change this to an absolute value, even if you intend to use the documented default;  it provides better documentation and removes the "surprise" factor.There are two thread types that can be configured. GATEWAY is used by a thread pool to call a database client library to establish a DB connection.The default size is 256KB;  many customers raise this to 512KB ( no performance penalty for over-configuring ). This value must be set to 1 MB if Teradata connections are used. SERVER threads are used to run queries.  OBIEE uses recursive algorithms during the analysis of query structures which can consume significant thread stack storage.  It's difficult to provide guidance on a value that depends on data and complexity.  The general notion is to provide more space than you think you need,  "double down" and increase the value if you run out, otherwise inspect the query to understand why it is too complex for the thread stack.  There are protections built into the software to abort a single user query that is too complex, but the algorithms don't cover all situations.256 KB  The default 32-bit stack size.  Many customers increased this to 512KB on 32-bit.  A 64-bit server is very likely to crash with this value;  the stack contains mostly register values, which are twice as big.512 KB  The documented 64-bit default.  Some early releases of obiee didn't set this correctly, resulting in 256KB stacks.1 MB  The recommended 64-bit setting.  If your system only ever uses 512KB of stack space, there is no performance penalty for using 1MB stack size.2 MB  Many large customers use this value for safety.  No performance penalty.nqscheduler does not use the NQSConfig.INI file to set thread stack size.If this process crashes because the thread stack is too small, use this to set 2MB:export OBI_BACKGROUND_STACK_SIZE=2048 Shared libraries are not (shared) When application libraries are loaded at run-time, AIX makes a decision on whether to load the libraries in a "public" memory segment.  If the filesystem library permissions do not have the "Read-Other" permission bit, AIX loads the library into private process memory with two significant side-effects:* The libraries reduce the heap storage available.      Might be significant in 32-bit processes;  irrelevant in 64-bit processes.* Library code is loaded into multiple real pages for execution;  one copy for each process.Multiple execution images is a significant issue for both 32- and 64-bit processes.The "real memory pages" saved by using public memory segments is a minor concern.  Today's machines typically have plenty of real memory.The real problem with private copies of libraries is that they consume processor cache blocks, which are limited.   The same library instructions executing in different real pages will cause memory delays as the i-cache ( instruction cache 128KB blocks) are refreshed from real memory.   Performance loss because instructions are delayed is something that is difficult to measure without access to low-level cache fault data.   The machine just appears to be running slowly for no observable reason.This is an easy problem to detect, and an easy problem to correct.Detection:  "genld -l" AIX command produces a list of the libraries used by each process and the AIX memory address where they are loaded.32-bit public segment is 13 ( "dxxxxxxx" ).   private segments are 2-a.64-bit public segment is 9 ( "9xxxxxxxxxxxxxxx") ; private segment is 8.genld -l | grep -v ' d| 9' | sort +2provides a list of privately loaded libraries. Repair: chmod o+r <libname>AIX shared libraries will have a suffix of ".so" or ".a".Another technique is to change all libraries in a selected directory to repair those that might not be currently loaded.   The usual directories that need repair are obiee code, httpd code and plugins, database client libraries and java.chmod o+r /shr/dir/*.a /shr/dir/*.so Configure your system for diagnosticsProduction systems shouldn't crash, and yet bad things happen to good software.If obiee software crashes and produces a core, you should configure your system for reliable transfer of the failing conditions to Oracle Tech Support.  Here's what we need to be able to diagnose a core file from your system.* fullcore enabled. chdev -lsys0 -a fullcore=true* core naming enabled. chcore -n on -d* ulimit must not truncate core. see item 3.* pstack.sh is used to capture core documentation.* obidoc is used to capture current AIX configuration.* snapcore  AIX utility captures core and libraries. Use the proper syntax. $ snapcore -r corename executable-fullpath   /tmp/snapcore will contain the .pax.Z output file.  It is compressed.* If cores are directed to a common directory, ensure obiee userid can write to the directory.  ( chcore -p /cores -d ; chmod 777 /cores )The filesystem must have sufficient space to hold a crashing obiee application.Use:  df -k  Check the "Free" column ( not "% Used" )  8388608 is 8GB. Disable Oracle Client Library signal handlingThe Oracle DB Client Library is frequently distributed with the sqlplus development kit.By default, the library enables a signal handler, which will document a call stack if the application crashes.   The signal handler is not needed, and definitely disruptive to obiee diagnostics.   It needs to be disabled.   sqlnet.ora is typically located at:   $ORACLE_HOME/network/admin/sqlnet.oraAdd this line at the top of the file:   DIAG_SIGHANDLER_ENABLED=FALSE Disable async query in the RPD connection pool.This might be an obiee 10.1.3.4 issue only ( still checking  )."async query" must be disabled in the connection pools.It was designed to enable query cancellation to a database, and turned out to have too many edge conditions in normal communication that produced random corruption of data and crashes.  Please ensure it is turned off in the RPD. Check AIX error report (errpt).Errors external to obiee applications can trigger crashes.  $ /bin/errpt -aHardware errors ( firmware, adapters, disks ) should be reported to IBM support.All application core files are recorded by AIX;  the most recent ones are listed first. Reserved for something important to say.

  Read the article

• Tomcat6 can't connect to MySql (The driver has not received any packets from the server)

  - by Tobias Wiesenthal

  Hi all, i'm running an Apache Tomcat 6.0.20 / MySQL 5.1.37-lubuntu / sun-java6-jdk /sun-java6-jre / sun-java6-bin on my local machine using Ubuntu 9.10 as OS. I'm trying to get a simple DB-query example running for 2 days now, but i still get this Exception: org.apache.jasper.JasperException: javax.servlet.ServletException: javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.)" org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:522) org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:398) org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342) org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) root cause javax.servlet.ServletException: javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.)" org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:862) org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:791) org.apache.jsp.index_jsp._jspService(index_jsp.java:104) org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374) org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342) org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) root cause javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.)" org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(QueryTagSupport.java:285) org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(QueryTagSupport.java:168) org.apache.jsp.index_jsp._jspx_meth_sql_005fquery_005f0(index_jsp.java:274) org.apache.jsp.index_jsp._jspx_meth_c_005fotherwise_005f0(index_jsp.java:216) org.apache.jsp.index_jsp._jspx_meth_c_005fchoose_005f0(index_jsp.java:130) org.apache.jsp.index_jsp._jspService(index_jsp.java:93) org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374) org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342) org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267) javax.servlet.http.HttpServlet.service(HttpServlet.java:717) my web.xml looks like this : <?xml version="1.0" encoding="utf-8"?> <web-app xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" version="2.5"> <resource-ref> <description>DB Connection</description> <res-ref-name>jdbc/testDB</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> </web-app> the context.xml looks like this : <?xml version="1.0" encoding="UTF-8"?> <Context path="/my1stApp" docBase="/var/www/jsp/my1stApp" debug="5" reloadable="true" crossContext="true"> <Resource name="jdbc/testDB" auth="Container" type="javax.sql.DataSource" maxActive="5" maxIdle="5" maxWait="10000" username="user" password="password" driverClassName="com.mysql.jdbc.Driver" url="jdbc:mysql://localhost:3306/some"/> </Context> and the jsp file looks like this: <%@ page contentType="text/html" %> <%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %> <%@ taglib prefix="fn" uri="http://java.sun.com/jsp/jstl/functions" %> <%@ taglib prefix="fmt" uri="http://java.sun.com/jsp/jstl/fmt" %> <%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %> <html> <head> <title>DroneLootTool</title> </head> <body bgcolor="white"> <sql:query var="res" dataSource="jdbc/testDB"> select name, othername from mytable </sql:query> <h2>Results</h2> <c:forEach var="row" items="${res.rows}"> Name ${row.name}<br/> MoreName ${row.othername}<br/><br/> </c:forEach> </body> </html> read lots of forum entries / tried lots of different settings (always changed back to original settings when it didnt' work) set TOMCAT6_SECURITY=no in /etc/default/tomcat6 because TOMCAT6_SECURITY=yes was causing trouble too the skip-networking flag is not set for the DB (BIND 127.0.0.1 is set) firewall is swiched off (sudo ufw disable) MySQL works (tested several times with user used in this skript) telnet localhost 3306 says Trying ::1... Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Connection closed by foreign host. The TestConnection.java produced the following output: me@my-laptop:~/Desktop$ java -classpath '/usr/share/java/mysql.jar:./' TestConnection com.mysql.jdbc.Driver jdbc:mysql://localhost:3306/testDB myuser mypassword com.mysql.jdbc.CommunicationsException: Communications link failure Last packet sent to the server was 0 ms ago. at com.mysql.jdbc.SQLError.createCommunicationsException(SQLError.java:1070) at com.mysql.jdbc.ConnectionImpl.createNewIO(ConnectionImpl.java:2103) at com.mysql.jdbc.ConnectionImpl.<init>(ConnectionImpl.java:718) at com.mysql.jdbc.ConnectionImpl.getInstance(ConnectionImpl.java:298) at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:282) at java.sql.DriverManager.getConnection(DriverManager.java:582) at java.sql.DriverManager.getConnection(DriverManager.java:185) at TestConnection.checkConnection(TestConnection.java:40) at TestConnection.main(TestConnection.java:21) Caused by: com.mysql.jdbc.CommunicationsException: Communications link failure Last packet sent to the server was 0 ms ago. at com.mysql.jdbc.SQLError.createCommunicationsException(SQLError.java:1070) at com.mysql.jdbc.MysqlIO.readPacket(MysqlIO.java:666) at com.mysql.jdbc.MysqlIO.doHandshake(MysqlIO.java:1069) at com.mysql.jdbc.ConnectionImpl.createNewIO(ConnectionImpl.java:2031) ... 7 more Caused by: java.io.EOFException: Can not read response from server. Expected to read 4 bytes, read 0 bytes before connection was unexpectedly lost. at com.mysql.jdbc.MysqlIO.readFully(MysqlIO.java:2431) at com.mysql.jdbc.MysqlIO.readPacket(MysqlIO.java:590) ... 9 more Connection failed. i don't know if there is a difference between the way the java driver connects to the DB and the Perl DBI module does, but this PERL skript works #!/usr/bin/perl -w use CGI; use DBI; use strict; print CGI::header(); my $dbh = DBI->connect("dbi:mysql:some:localhost", "user", "password"); my $sSql = "SELECT * from mytable"; my $ppl = $dbh->selectall_arrayref( $sSql ); foreach my $pl (@$ppl) { my @array = @$pl; print @array; } $dbh->disconnect; enabled --log-warnings on the mysql, but i didn't get any new warnings. When i was searching the logs for warnings i found this messages when i restart the tomcat, don't know if it helps to find the problem : Feb 2 19:50:37 tobias-laptop jsvc.exec[3129]: 02.02.2010 19:50:37 org.apache.catalina.startup.HostConfig checkResources#012INFO: Undeploying context [/myapp] Feb 2 19:50:37 tobias-laptop jsvc.exec[3129]: 02.02.2010 19:50:37 org.apache.catalina.loader.WebappClassLoader clearReferencesThreads#012SCHWERWIEGEND: A web application appears to have started a thread named [MySQL Statement Cancellation Timer] but has failed to stop it. This is very likely to create a memory leak. Feb 2 19:50:37 tobias-laptop jsvc.exec[3129]: 02.02.2010 19:50:37 org.apache.catalina.startup.HostConfig deployDescriptor#012INFO: Deploying configuration descriptor myapp.xml

  Read the article

• memory leak error when using an iterator

  - by Adnane Jaafari

  please i'm having this error if any one can explain it : while using an iterator in my methode public void createDemandeP() { if (demandep.getDateDebut().after(demandep.getDateFin())) { FacesContext .getCurrentInstance() .addMessage( null, new FacesMessage(FacesMessage.SEVERITY_WARN, "Attention aux dates", "la date de debut doit être avant la date de fin!")); } else if (demandep.getDateDebut().before(demandep.getDateFin())) { List<DemandeP> list = new ArrayList<DemandeP>(); list.addAll(chaletService.getChaletBylibelle(chaletChoisi).get(0) .getListDemandesP()); Iterator<DemandeP> it = list.iterator(); DemandeP d = it.next(); while (it.hasNext()) { if ((d.getDateDebut().compareTo(demandep.getDateDebut()) == 0) || (d.getDateFin().compareTo(demandep.getDateDebut()) == 0) || (d.getDateFin().compareTo(demandep.getDateFin()) == 0) || (d.getDateDebut().compareTo(demandep.getDateDebut()) == 0) || (d.getDateDebut().before(demandep.getDateDebut()) && d .getDateFin().after(demandep.getDateFin())) || (d.getDateDebut().before(demandep.getDateFin()) && d .getDateDebut().after(demandep.getDateDebut())) || (d.getDateFin().after(demandep.getDateDebut()) && d .getDateFin().before(demandep.getDateFin()))) { FacesContext.getCurrentInstance().getMessageList().clear(); FacesContext .getCurrentInstance() .addMessage( null, new FacesMessage( FacesMessage.SEVERITY_FATAL, "Periode Ou chalet indisponicle ", "Veillez choisir une autre marge de date !")); } } } else { demandep.setEtat("En traitement"); DateFormat dateFormat = new SimpleDateFormat("dd/MM/yyyy"); Date date = new Date(); try { demandep.setDateDemande(dateFormat.parse(dateFormat .format(date))); } catch (ParseException e) { System.out.println("errooor date"); e.printStackTrace(); } nameUser = auth.getName(); // System.out.println(nameUser); adherent = utilisateurService.findAdherentByNom(nameUser).get(0); demandep.setUtilisateur(adherent); // System.out.println(chaletService.getChaletBylibelle(chaletChoisi).get(0).getLibelle()); demandep.setChalet(chaletService.getChaletBylibelle(chaletChoisi) .get(0)); demandep.setNouvelleDemande(true); demandePService.ajouterDemandeP(demandep); } } oct. 23, 2013 7:19:30 PM org.apache.catalina.core.StandardContext reload INFO: Le rechargement du contexte [/ONICLFINAL] a démarré oct. 23, 2013 7:19:30 PM org.apache.catalina.core.StandardWrapper unload INFO: Waiting for 1 instance(s) to be deallocated oct. 23, 2013 7:19:31 PM org.apache.catalina.core.StandardWrapper unload INFO: Waiting for 1 instance(s) to be deallocated oct. 23, 2013 7:19:32 PM org.apache.catalina.core.StandardWrapper unload INFO: Waiting for 1 instance(s) to be deallocated oct. 23, 2013 7:19:32 PM org.apache.catalina.core.ApplicationContext log INFO: Closing Spring root WebApplicationContext oct. 23, 2013 7:19:32 PM org.apache.catalina.loader.WebappClassLoader clearReferencesJdbc SEVERE: The web application [/ONICLFINAL] registered the JDBC driver [com.mysql.jdbc.Driver] b but failed to unregister it when the web application was stopped. To prevent a memory leak, the JDBC Driver has been forcibly unregistered. oct. 23, 2013 7:19:32 PM org.apache.catalina.loader.WebappClassLoader clearReferencesThreads SEVERE: The web application [/ONICLFINAL] appears to have started a thread named [MySQL Statement Cancellation Timer] but has failed to stop it. This is very likely to create a memory leak. oct. 23, 2013 7:19:32 PM org.apache.catalina.loader.WebappClassLoader clearReferencesThreads SE VERE: The web application [/ONICLFINAL] is still processing a request that has yet to finish. This is very likely to create a memory leak. You can control the time allowed for requests to finish by using the unloadDelay attribute of the standard Context implementation. oct. 23, 2013 7:19:32 PM org.apache.catalina.loader.WebappClassLoader clearThreadLocalMap SEVERE: The web application [/ONICLFINAL] created a ThreadLocal with key of type [org.springframework.core.NamedThreadLocal] (value [Hibernate Sessions registered for deferred close]) and a value of type [java.util.HashMap] (value [{org.hibernate.impl.SessionFactoryImpl@f6e256=[SessionImpl(PersistenceContext[entityKeys=[EntityKey[bo.DemandeP#1], EntityKey[bo.Utilisateur#3], EntityKey[bo.Chalet#1], EntityKey[bo.Role#2], EntityKey[bo.DemandeP#2]],collectionKeys=[CollectionKey[bo.Role.ListeUsers#2], CollectionKey[bo.Chalet.listPeriodes#1], CollectionKey[bo.Utilisateur.demandes#3], CollectionKey[bo.Utilisateur.demandesP#3], CollectionKey[bo.Chalet.listDemandesP#1]]];ActionQueue[insertions=[] updates=[] deletions=[] collectionCreations=[] collectionRemovals=[] collectionUpdates=[]])]}]) but failed to remove it when the web application was stopped. This is very likely to create a memory leak. oct. 23, 2013 7:19:32 PM org.apache.catalina.loader.WebappClassLoader clearThreadLocalMap SEVERE: The web application [/ONICLFINAL] created a ThreadLocal with key of type [org.springframework.core.NamedThreadLocal] (value [Request attributes]) and a value of type [org.springframework.web.context.request.ServletRequestAttributes] (value [org.apache.catalina.connector.RequestFacade@17f3488]) but failed to remove it when the web application was stopped. This is very likely to create a memory leak. oct. 23, 2013 7:19:32 PM org.apache.catalina.loader.WebappClassLoader clearThreadLocalMap SEVERE: The web application [/ONICLFINAL] created a ThreadLocal with key of type [java.lang.ThreadLocal] (value [java.lang.ThreadLocal@51f78b]) and a value of type [org.springframework.security.core.context.SecurityContextImpl] (value [org.springframework.security.core.context.SecurityContextImpl@8e463c8b: Authentication: org.springframework.security.authentication.UsernamePasswordAuthenticationToken@8e463c8b: Principal: org.springframework.security.core.userdetails.User@311aa119: Username: maatouf; Password: [PROTECTED]; Enabled: true; AccountNonExpired: true; credentialsNonExpired: true; AccountNonLocked: true; Granted Authorities: ROLE_ADHER; Credentials: [PROTECTED]; Authenticated: true; Details: org.springframework.security.web.authentication.WebAuthenticationDetails@ffff4c9c: RemoteIpAddress: 0:0:0:0:0:0:0:1; SessionId: 14CD5D4E8E0E3AEB0367AB7115038FED; Granted Authorities: ROLE_ADHER]) but failed to remove it when the web application was stopped. This is very likely to create a memory leak. oct. 23, 2013 7:19:32 PM org.apache.catalina.loader.WebappClassLoader clearThreadLocalMap SEVERE: The web application [/ONICLFINAL] created a ThreadLocal with key of type [java.lang.ThreadLocal] (value [java.lang.ThreadLocal@152e9b7]) and a value of type [net.sf.cglib.proxy.Callback[]] (value [[Lnet.sf.cglib.proxy.Callback;@6e1f4c]) but failed to remove it when the web application was stopped. This is very likely to create a memory leak. oct. 23, 2013 7:19:32 PM org.apache.catalina.loader.WebappClassLoader clearThreadLocalMap SEVERE: The web application [/ONICLFINAL] created a ThreadLocal with key of type [javax.faces.context.FacesContext$1] (value [javax.faces.context.FacesContext$1@9ecc6d]) and a value of type [com.sun.faces.context.FacesContextImpl] (value [com.sun.faces.context.FacesContextImpl@1c8bbed]) but failed to remove it when the web application was stopped. This is very likely to create a memory leak. oct. 23, 2013 7:19:32 PM org.apache.catalina.loader.WebappClassLoader clearThreadLocalMap SEVERE: The web application [/ONICLFINAL] created a ThreadLocal with key of type [java.lang.ThreadLocal] (value [java.lang.ThreadLocal@1a9e75f]) and a value of type [com.sun.faces.context.FacesContextImpl] (value [com.sun.faces.context.FacesContextImpl@1c8bbed]) but failed to remove it when the web application was stopped. This is very likely to create a memory leak. oct. 23, 2013 7:19:32 PM org.apache.catalina.loader.WebappClassLoader clearThreadLocalMap SEVERE: The web application [/ONICLFINAL] created a ThreadLocal with key of type [org.springframework.core.NamedThreadLocal] (value [Locale context]) and a value of type [org.springframework.context.i18n.SimpleLocaleContext] (value [fr_FR]) but failed to remove it when the web application was stopped. This is very likely to create a memory leak. oct. 23, 2013 7:19:32 PM org.apache.catalina.loader.WebappClassLoader clearThreadLocalMap SEVERE: The web application [/ONICLFINAL] created a ThreadLocal with key of type [com.sun.faces.application.ApplicationAssociate$1] (value [com.sun.faces.application.ApplicationAssociate$1@195266b]) and a value of type [com.sun.faces.application.ApplicationAssociate] (value [com.sun.faces.application.ApplicationAssociate@10d595c]) but failed to remove it when the web application was stopped. This is very likely to create a memory leak. oct. 23, 2013 7:19:33 PM org.apache.catalina.loader.WebappClassLoader validateJarFile INFO: validateJarFile(D:\newWorkSpace\.metadata\.plugins\org.eclipse.wst.server.core\tmp0\wtpwebapps\ONICLF INAL\WEB-INF\lib\servlet-api-2.5.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class oct. 23, 2013 7:19:33 PM org.apache.catalina.core.ApplicationContext log

  Read the article

• PSTN Trunk TDM400P Install on Asterisk / Trixbox

  - by Jona

  Hey All, I'm trying to get a TDM400P card with FXO module to connect to our PSTN line. The card is correctly detected by Linux: [trixbox1.localdomain asterisk]# lspci 00:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface I've run setup-pstn which produces the following output trixbox1.localdomain ~]# setup-pstn -------------------------------------------------------------- Detecting PSTN cards and USB PSTN Devices -------------------------------------------------------------- Hardware present! STOPPING ASTERISK Asterisk Stopped STOPPING FOP SERVER FOP Server Stopped Unloading DAHDI hardware modules: done Loading DAHDI hardware modules: wct4xxp: [ OK ] wcte12xp: [ OK ] wct1xxp: [ OK ] wcte11xp: [ OK ] wctdm24xxp: [ OK ] opvxa1200: [ OK ] wcfxo: [ OK ] wctdm: [ OK ] wcb4xxp: [ OK ] wctc4xxp: [ OK ] xpp_usb: [ OK ] Running dahdi_cfg: [ OK ] SETTING FILE PERMISSIONS Permissions OK STARTING ASTERISK Asterisk Started STARTING FOP SERVER FOP Server Started Chan Extension Context Language MOH Interpret Blocked State pseudo default en default In Service 1 from-pstn en default In Service dahdi_scan returns: dahdi_scan [1] active=yes alarms=OK description=Wildcard TDM400P REV I Board 5 name=WCTDM/4 manufacturer=Digium devicetype=Wildcard TDM400P REV I location=PCI Bus 00 Slot 10 basechan=1 totchans=4 irq=209 type=analog port=1,FXO port=2,none port=3,none port=4,none And asterisk can see the channel: > trixbox1*CLI> dahdi show channel 1 > Channel: 1LI> File Descriptor: 14 > Span: 11*CLI> Extension: I> Dialing: > noI> Context: from-pstn Caller ID: I> > Calling TON: 0 Caller ID name: > Mailbox: none Destroy: 0LI> InAlarm: > 1LI> Signalling Type: FXS Kewlstart > Radio: 0*CLI> Owner: <None> Real: > <None>> Callwait: <None> Threeway: > <None> Confno: -1LI> Propagated > Conference: -1 Real in conference: 0 > DSP: no1*CLI> Busy Detection: no TDD: > no1*CLI> Relax DTMF: no > Dialing/CallwaitCAS: 0/0 Default law: > ulaw Fax Handled: no Pulse phone: no > DND: no1*CLI> Echo Cancellation: > trixbox1128 taps trixbox1(unless TDM > bridged) currently OFF Actual > Confinfo: Num/0, Mode/0x0000 Actual > Confmute: No > Hookstate (FXS only): Onhook A cat of /etc/asterisk/dahdi.conf shows: [trixbox1.localdomain ~]# cat /etc/asterisk/dahdi-channels.conf ; Autogenerated by /usr/sbin/dahdi_genconf on Tue May 25 17:45:13 2010 ; If you edit this file and execute /usr/sbin/dahdi_genconf again, ; your manual changes will be LOST. ; Dahdi Channels Configurations (chan_dahdi.conf) ; ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings ; ; Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER) ;;; line="1 WCTDM/4/0 FXSKS (SWEC: MG2)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 1 callerid= group= context=default I have configured a "ZAP Trunk (DAHDI compatibility Mode)" with the ZAP identifier 1 and an outbound route, but when ever I try to make an external call via it I get the "All Circuits are busy now, please try your call again later message". I have one outbound route which uses the dial pattern 9|. and the Trunk Zap/1 and one Zap Trunk which uses Zap Identifier (trunk name): 1 and has no Dial Rules. The FXO module is directly connected to our phone line from BT via a BT-RJ11 cable. When running tail -f /var/log/asterisk/full and placing a call I get the following output: [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP RTP TOS bits 184 [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP RTP CoS mark 5 [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP VRTP TOS bits 136 [May 26 11:10:52] VERBOSE[2723] logger.c: == Using SIP VRTP CoS mark 6 [May 26 11:10:52] WARNING[2661] pbx.c: FONALITY: This thread has already held the conlock, skip locking [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:1] Macro("SIP/801-b7ce8c28", "user-callerid,SKIPTTL,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:1] Set("SIP/801-b7ce8c28", "AMPUSER=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:2] GotoIf("SIP/801-b7ce8c28", "0?report") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:3] ExecIf("SIP/801-b7ce8c28", "1?Set(REALCALLERIDNUM=801)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:4] Set("SIP/801-b7ce8c28", "AMPUSER=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:5] Set("SIP/801-b7ce8c28", "AMPUSERCIDNAME=Jona") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:6] GotoIf("SIP/801-b7ce8c28", "0?report") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:7] Set("SIP/801-b7ce8c28", "AMPUSERCID=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:8] Set("SIP/801-b7ce8c28", "CALLERID(all)="Jona" <801>") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:9] Set("SIP/801-b7ce8c28", "REALCALLERIDNUM=801") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:10] ExecIf("SIP/801-b7ce8c28", "0?Set(CHANNEL(language)=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:11] GotoIf("SIP/801-b7ce8c28", "1?continue") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-user-callerid,s,20) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-user-callerid:20] NoOp("SIP/801-b7ce8c28", "Using CallerID "Jona" <801>") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:2] Set("SIP/801-b7ce8c28", "_NODEST=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:3] Macro("SIP/801-b7ce8c28", "record-enable,801,OUT,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-record-enable:1] GotoIf("SIP/801-b7ce8c28", "1?check") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-record-enable,s,4) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-record-enable:4] AGI("SIP/801-b7ce8c28", "recordingcheck,20100526-111052,1274868652.1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Launched AGI Script /var/lib/asterisk/agi-bin/recordingcheck [May 26 11:10:52] VERBOSE[2858] logger.c: recordingcheck,20100526-111052,1274868652.1: Outbound recording not enabled [May 26 11:10:52] VERBOSE[2858] logger.c: -- <SIP/801-b7ce8c28>AGI Script recordingcheck completed, returning 0 [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-record-enable:5] MacroExit("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:4] Macro("SIP/801-b7ce8c28", "dialout-trunk,1,01483890915,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:1] Set("SIP/801-b7ce8c28", "DIAL_TRUNK=1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/801-b7ce8c28", "0?sub-pincheck,s,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/801-b7ce8c28", "0?disabletrunk,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:4] Set("SIP/801-b7ce8c28", "DIAL_NUMBER=01483890915") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:5] Set("SIP/801-b7ce8c28", "DIAL_TRUNK_OPTIONS=tr") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:6] Set("SIP/801-b7ce8c28", "OUTBOUND_GROUP=OUT_1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/801-b7ce8c28", "1?nomax") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-dialout-trunk,s,9) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/801-b7ce8c28", "0?skipoutcid") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:10] Set("SIP/801-b7ce8c28", "DIAL_TRUNK_OPTIONS=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:11] Macro("SIP/801-b7ce8c28", "outbound-callerid,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERPRES()=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/801-b7ce8c28", "0?Set(REALCALLERIDNUM=801)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/801-b7ce8c28", "1?normcid") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-outbound-callerid,s,6) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:6] Set("SIP/801-b7ce8c28", "USEROUTCID=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:7] Set("SIP/801-b7ce8c28", "EMERGENCYCID=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:8] Set("SIP/801-b7ce8c28", "TRUNKOUTCID=") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/801-b7ce8c28", "1?trunkcid") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-outbound-callerid,s,12) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERID(all)=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERID(all)=)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/801-b7ce8c28", "0?Set(CALLERPRES()=prohib_passed_screen)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/801-b7ce8c28", "0?AGI(fixlocalprefix)") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:13] Set("SIP/801-b7ce8c28", "OUTNUM=01483890915") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:14] Set("SIP/801-b7ce8c28", "custom=DAHDI/1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/801-b7ce8c28", "0?Set(DIAL_TRUNK_OPTIONS=M(setmusic^))") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:16] Macro("SIP/801-b7ce8c28", "dialout-trunk-predial-hook,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/801-b7ce8c28", "0?bypass,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/801-b7ce8c28", "0?customtrunk") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:19] Dial("SIP/801-b7ce8c28", "DAHDI/1/01483890915,300,") in new stack [May 26 11:10:52] WARNING[2858] app_dial.c: Unable to create channel of type 'DAHDI' (cause 0 - Unknown) [May 26 11:10:52] VERBOSE[2858] logger.c: == Everyone is busy/congested at this time (1:0/0/1) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-dialout-trunk:20] Goto("SIP/801-b7ce8c28", "s-CHANUNAVAIL,1") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,1) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:1] GotoIf("SIP/801-b7ce8c28", "1?noreport") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Goto (macro-dialout-trunk,s-CHANUNAVAIL,3) [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s-CHANUNAVAIL@macro-dialout-trunk:3] NoOp("SIP/801-b7ce8c28", "TRUNK Dial failed due to CHANUNAVAIL (hangupcause: 0) - failing through to other trunks") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [901483890915@from-internal:5] Macro("SIP/801-b7ce8c28", "outisbusy,") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- Executing [s@macro-outisbusy:1] Playback("SIP/801-b7ce8c28", "all-circuits-busy-now,noanswer") in new stack [May 26 11:10:52] VERBOSE[2858] logger.c: -- <SIP/801-b7ce8c28> Playing 'all-circuits-busy-now.ulaw' (language 'en') [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-outisbusy:2] Playback("SIP/801-b7ce8c28", "pls-try-call-later,noanswer") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- <SIP/801-b7ce8c28> Playing 'pls-try-call-later.ulaw' (language 'en') [May 26 11:10:54] WARNING[2661] pbx.c: FONALITY: This thread has already held the conlock, skip locking [May 26 11:10:54] VERBOSE[2858] logger.c: == Spawn extension (macro-outisbusy, s, 2) exited non-zero on 'SIP/801-b7ce8c28' in macro 'outisbusy' [May 26 11:10:54] VERBOSE[2858] logger.c: == Spawn extension (from-internal, 901483890915, 5) exited non-zero on 'SIP/801-b7ce8c28' [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [h@from-internal:1] Macro("SIP/801-b7ce8c28", "hangupcall") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:1] ResetCDR("SIP/801-b7ce8c28", "vw") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:2] NoCDR("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:3] GotoIf("SIP/801-b7ce8c28", "1?skiprg") in new stack [May 26 11:10:54] VERBOSE[2858] logger.c: -- Goto (macro-hangupcall,s,6) [May 26 11:10:55] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:6] GotoIf("SIP/801-b7ce8c28", "1?skipblkvm") in new stack [May 26 11:10:55] VERBOSE[2858] logger.c: -- Goto (macro-hangupcall,s,9) [May 26 11:10:55] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:9] GotoIf("SIP/801-b7ce8c28", "1?theend") in new stack [May 26 11:10:55] VERBOSE[2858] logger.c: -- Goto (macro-hangupcall,s,11) [May 26 11:10:55] VERBOSE[2858] logger.c: -- Executing [s@macro-hangupcall:11] Hangup("SIP/801-b7ce8c28", "") in new stack [May 26 11:10:55] VERBOSE[2858] logger.c: == Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'SIP/801-b7ce8c28' in macro 'hangupcall' [May 26 11:10:55] VERBOSE[2858] logger.c: == Spawn extension (from-internal, h, 1) exited non-zero on 'SIP/801-b7ce8c28' I'm guessing I've missed a configuration step somewhere but no idea where, any help greatly appreciated.

  Read the article

< Previous Page | 1 2 3