Search Results

Search found 3240 results on 130 pages for 'car tracking'.

Page 3/130 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• The Raspberry Pi JavaFX In-Car System (Part 3)

  - by speakjava

  Ras Pi car pt3 Having established communication between a laptop and the ELM327 it's now time to bring in the Raspberry Pi. One of the nice things about the Raspberry Pi is the simplicity of it's power supply.  All we need is 5V at about 700mA, which in a car is as simple as using a USB cigarette lighter adapter (which is handily rated at 1A).  My car has two cigarette lighter sockets (despite being specified with the non-smoking package and therefore no actual cigarette lighter): one in the centre console and one in the rear load area.  This was convenient as my idea is to mount the Raspberry Pi in the back to minimise the disruption to the very clean design of the Audi interior. The first task was to get the Raspberry Pi to communicate using Wi-Fi with the ELM 327.  Initially I tried a cheap Wi-Fi dongle from Amazon, but I could not get this working with my home Wi-Fi network since it just would not handle the WPA security no matter what I did.  I upgraded to a Wi Pi from Farnell and this works very well. The ELM327 uses Ad-Hoc networking, which is point to point communication.  Rather than using a wireless router each connecting device has its own assigned IP address (which needs to be on the same subnet) and uses the same ESSID.  The settings of the ELM327 are fixed to an IP address of 192.168.0.10 and useing the ESSID, "Wifi327".  To configure Raspbian Linux to use these settings we need to modify the /etc/network/interfaces file.  After some searching of the web and a few false starts here's the settings I came up with: auto lo eth0 wlan0 iface lo inet loopback iface eth0 inet static     address 10.0.0.13     gateway 10.0.0.254     netmask 255.255.255.0 iface wlan0 inet static     address 192.168.0.1     netmask 255.255.255.0     wireless-essid Wifi327     wireless-mode ad-ho0 After rebooting, iwconfig wlan0 reported that the Wi-Fi settings were correct.  However, ifconfig showed no assigned IP address.  If I configured the IP address manually using ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 then everything was fine and I was able to happily ping the IP address of the ELM327.  I tried numerous variations on the interfaces file, but nothing I did would get me an IP address on wlan0 when the machine booted.  Eventually I decided that this was a pointless thing to spend more time on and so I put a script in /etc/init.d and registered it with update-rc.d.  All the script does (currently) is execute the ifconfig line and now, having installed the telnet package I am able to telnet to the ELM327 via the Raspberry Pi.  Not nice, but it works. Here's a picture of the Raspberry Pi in the car for testing In the next part we'll look at running the Java code on the Raspberry Pi to collect data from the car systems.

  Read the article

• What is the proper way to handle non-tracking self tracking entities?

  - by Will

  Self tracking entities. Awesome. Except when you do something like return Db.Users; none of the self-tracking entities are tracking (until, possibly, they are deserialized). Fine. So we have to recognize that there is a possibility that an entity returning to us does not have tracking enabled. Now what??? Things I have tried For the given method body: using (var db = new Database()) { if (update.ChangeTracker.ChangeTrackingEnabled) db.Configurations.ApplyChanges(update); else FigureItOut(update, db); db.SaveChanges(); update.AcceptChanges(); } The following implementations of FigureItOut all fail: db.Configurations.Attach(update); db.DetectChanges(); Nor db.Configurations.Attach(update); db.Configurations.ApplyCurrentValues(update); Nor db.Configurations.Attach(update); db.Configurations.ApplyOriginalValues(update); Nor db.Configurations.Attach(update); db.Configurations.ApplyChanges(update Nor about anything else I can figure to throw at it, other than Getting the original entity from the database Comparing each property by hand Updating properties as needed What, exactly, am I supposed to do with self-tracking entities that aren't tracking themselves??

  Read the article

• Change Tracking

  - by Ricardo Peres

  You may recall my last post on Change Data Control. This time I am going to talk about other option for tracking changes to tables on SQL Server: Change Tracking. The main differences between the two are: Change Tracking works with SQL Server 2008 Express Change Tracking does not require SQL Server Agent to be running Change Tracking does not keep the old values in case of an UPDATE or DELETE Change Data Capture uses an asynchronous process, so there is no overhead on each operation Change Data Capture requires more storage and processing Here's some code that illustrates it's usage: -- for demonstrative purposes, table Post of database Blog only contains two columns, PostId and Title -- enable change tracking for database Blog, for 2 days ALTER DATABASE Blog SET CHANGE_TRACKING = ON (CHANGE_RETENTION = 2 DAYS, AUTO_CLEANUP = ON); -- enable change tracking for table Post ALTER TABLE Post ENABLE CHANGE_TRACKING WITH (TRACK_COLUMNS_UPDATED = ON); -- see current records on table Post SELECT * FROM Post SELECT * FROM sys.sysobjects WHERE name = 'Post' SELECT * FROM sys.sysdatabases WHERE name = 'Blog' -- confirm that table Post and database Blog are being change tracked SELECT * FROM sys.change_tracking_tables SELECT * FROM sys.change_tracking_databases -- see current version for table Post SELECT p.PostId, p.Title, c.SYS_CHANGE_VERSION, c.SYS_CHANGE_CONTEXT FROM Post AS p CROSS APPLY CHANGETABLE(VERSION Post, (PostId), (p.PostId)) AS c; -- update post UPDATE Post SET Title = 'First Post Title Changed' WHERE Title = 'First Post Title'; -- see current version for table Post SELECT p.PostId, p.Title, c.SYS_CHANGE_VERSION, c.SYS_CHANGE_CONTEXT FROM Post AS p CROSS APPLY CHANGETABLE(VERSION Post, (PostId), (p.PostId)) AS c; -- see changes since version 0 (initial) SELECT p.Title, c.PostId, SYS_CHANGE_VERSION, SYS_CHANGE_OPERATION, SYS_CHANGE_COLUMNS, SYS_CHANGE_CONTEXT FROM CHANGETABLE(CHANGES Post, 0) AS c LEFT OUTER JOIN Post AS p ON p.PostId = c.PostId; -- is column Title of table Post changed since version 0? SELECT CHANGE_TRACKING_IS_COLUMN_IN_MASK(COLUMNPROPERTY(OBJECT_ID('Post'), 'Title', 'ColumnId'), (SELECT SYS_CHANGE_COLUMNS FROM CHANGETABLE(CHANGES Post, 0) AS c)) -- get current version SELECT CHANGE_TRACKING_CURRENT_VERSION() -- disable change tracking for table Post ALTER TABLE Post DISABLE CHANGE_TRACKING; -- disable change tracking for database Blog ALTER DATABASE Blog SET CHANGE_TRACKING = OFF; You can read about the differences between the two options here. Choose the one that best suits your needs! SyntaxHighlighter.config.clipboardSwf = 'http://alexgorbatchev.com/pub/sh/2.0.320/scripts/clipboard.swf'; SyntaxHighlighter.brushes.CSharp.aliases = ['c#', 'c-sharp', 'csharp']; SyntaxHighlighter.brushes.Xml.aliases = ['xml']; SyntaxHighlighter.all();

  Read the article

• Good bug tracking with Sharepoint?

  - by torbengb

  At my place of work, it has been decided to move many processes to Sharepoint. I'm now looking into how Sharepoint can be used for bug tracking (à la Mantis, FogBugz etc. but within Sharepoint). Specifically, we're using a collaboration room and the solution must work inside that. I know that I can create lists using an "Issue tracker" template, but it lacks workflow, integrated correspondence (like FogBugz), and audit log (any user can edit any field any time, without it being noted anywhere). That's not sufficient, so I am looking for "bigger" solutions but haven't yet found anything at all. This question is similar but aims at Helpdesk use; we aim at bug tracking and change requests to a system. I'm open to suggestions! As I'm not an administrator, I can't just grab a Sharepoint component and install it for testing. I'm looking for experiences, documentation, white papers, screen shots -- the actual downloadable will be relevant later. Ideally, some of these matters should be covered: Support for different ticket types (bug, feature, inquiry, internal task). Configurable workflow per ticket type, no fixed number of steps. Configurable read/write permissions per field and per workflow status. Configurable dashboard for managers with nice charts. Configurable email notifications. Correspondence à la FogBugz. (Challenge: we use Notes, not Exchange.)

  Read the article

• Tracking Security Vulnerability remediation

  - by Zypher

  I've been looking into this for a little while, but havn't really found anything suitable. What I am looking for is a system to track security vulnerability remdiation status. Something like "bugzilla for IT" What I am looking for is something pretty simple that allows the following: batch entry of new vulnerabilities that need to be remediated Per user assignment AD/LDAP Authentiation Simple interface to track progress - research, change control status, remediated, etc. Historical search ability Ability to divide by division Ability to store proof of resolution for the Security Team to access Dependency tracking Linux based is best (that's my group :) ) Free is good, but cost doesn't matter so much if the system is worth it The systems doesn't have to have all of these features, but if it did that would be great. yes we could use our helpdesk software, but that has a bunch of pitfalls such as triggering SLA alerts and penalties as well as not easily searchable outside of a group. Most of what I have found are bug tracking systems that are geared towards developers, and are honstely way overkill for what I am looking for. Server Faults input is greatly appreciated as always!

  Read the article

• The Citroen GT – An Awesome Video Game Car Brought to Life [Video]

  - by Asian Angel

  If you are familiar with the Gran Turismo 5 video game releases, then you will definitely recognize the Citroen GT. French automaker Citroen and Japanese racing simulation developer Polyphony Digital decided to take things one step further and collaborated to bring this awesome car to life. Then they turned it loose on the streets of London! Citroen GT on the Streets of London (HD) [via BoingBoing] You can learn more about the Citroen GT, car show appearances, and more at Wikipedia: GT by Citroen Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware The Citroen GT – An Awesome Video Game Car Brought to Life [Video] Final Man vs. Machine Round of Jeopardy Unfolds; Watson Dominates Give Chromium-Based Browser Desktop Notifications a Native System Look in Ubuntu Chrome Time Track Is a Simple Task Time Tracker Google Sky Map Turns Your Android Phone into a Digital Telescope Walking Through a Seaside Village Wallpaper

  Read the article

• Algorithm to shift the car

  - by Simran kaur

  I have a track that can be divided into n number of tracks and a car as GamObject. The track has transforms such that some part of the track's width lies in negative x axis and other in positive. Requirement: One move should cross one track. On every move(left or right), I want the car to reach exact centre of the next track on either sides i.e left or right. My code: Problem: : Because of negative values , somewhere I am missing out something that is making car move not in desirable positions and that's because of negative values only. variable tracks is the number of tracks the whole track is divided in. variable dist is the total width of the complete track. On left movement: if (Input.GetKeyDown (KeyCode.LeftArrow)) { if (this.transform.position.x < r.renderer.bounds.min.x + box.size.x) { this.transform.position = new Vector3 (r.renderer.bounds.min.x + Mathf.FloorToInt(box.size.x), this.transform.position.y, this.transform.position.z); } else { int tracknumber = Mathf.RoundToInt(dist - transform.position.x)/tracks; float averagedistance = (tracknumber*(dist/tracks) + (tracknumber-1)*(dist/tracks))/2; if(transform.position.x > averagedistoftracks) { amountofmovement = amountofmovement + (transform.position.x - averagedistance); } else { amountofmovement = amountofmovement - (averagedistance - transform.position.x); } this.transform.position = new Vector3 (this.transform.position.x - amountofmovement, this.transform.position.y, this.transform.position.z); } }

  Read the article

• forward motion car physics - gradual slow

  - by spartan2417

  Im having trouble creating realistic car movements in xna 4. Right now i have a car going forward and hitting a terminal velocity which is fine but when i release the up key i need to the car to slow down gradually and then come to a stop. Im pretty sure this is easy code but i cant seem to get it to work the code - update if (Keyboard.GetState().IsKeyDown(Keys.Up)) { double elapsedTime = gameTime.ElapsedGameTime.Milliseconds; CalcTotalForce(); Acceleration = Vector2.Divide(CalcTotalForce(), MASS); Velocity = Vector2.Add(Velocity, Vector2.Multiply(Acceleration, (float)(elapsedTime))); Position = Vector2.Add(Position, Vector2.Multiply(Velocity, (float)(elapsedTime))); } added functions public Vector2 CalcTraction() { //Traction force = vector direction * engine force return Vector2.Multiply(forwardDirection, ENGINE_FORCE); } public Vector2 CalcDrag() { //Drag force = constdrag * velocity * speed return Vector2.Multiply(Vector2.Multiply(Velocity, DRAG_CONST), Velocity.Y); } public Vector2 CalcRoll() { //roll force = const roll * velocity return Vector2.Multiply(Velocity, ROLL_CONST); } public Vector2 CalcTotalForce() { //total force = traction + (-drag) + (-rolling) return Vector2.Add(CalcTraction(), Vector2.Add(-CalcDrag(), -CalcRoll())); } anyone have any ideas?

  Read the article

• tracking 301 redirects with awstats

  - by ceejayoz

  I'd like to use awstats to track usage of a URL shortener I'm using. Unfortunately, awstats treats log records with a non 200 status as an error, and excludes them from statistics. Is there a way to get awstats to treat 301s as 200s for stats tracking?

  Read the article

• Help Desk Issue Tracking/Ticketing System for MOSS 2007

  - by ITGuy24

  We are looking for a MOSS 2007 webpart for help desk issue tracking and ticketing. Any recommendations? It doesn't have to be too fancy, but would like something a little more comprehensive then the helpdesk template built into MOSS.

  Read the article

• What Issue Tracking System to select?

  - by Mikee

  What Issue Tracking Sytem is the most appropriate for fast, big, multilingual and international websites? The system has to handle both technical and content/editorial issues. What's the size and type of your site do you run? Whart System are you using for the keeping it state of the art? Thanks a lot for sharing your good or bad experience.

  Read the article

• JavaScript user tracking without sending data away

  - by l0b0

  To be able to do detailed user tracking (JS interaction, not just link logs) while preserving privacy, I'm looking for something like Google Analytics that stores all the data locally.

  Read the article

• Is there a free, smale-scale, not web-based issue/bug tracking system?

  - by Doc Brown

  I know, there were posts before here on SO before concerning issue or bug tracking systems, like this one, but the given answers point either to commercial systems or web-based systems, which both seem to be oversized for our needs. What I am looking for is a non-commercial tool for a team of 3 to 4 developers, which can be used on an existing fileserver, without the need of installing additional server software like a C/S database or a web server. Some things I expect from such a system: allows to remember bugs (with a priority) and issues / ideas for new features (mostly without a priority) description of the issue, perhaps some additional remarks short info who entered the bug/issue entry one or more tags allowing us to group or filter the list Any suggestions? EDIT: I should have said that, but we are using MS Windows clients, Visual Studio development, Tortoise SVN (the latter works fine without a subversion server). And yes, I am strict on "no server software", since all server based solutions I have seen so far seem much to oversized/heavy weighted/too-much-effort-to-be-worth-it. In fact, if no one has a better idea, we are going to use a spreadsheet, but I can't believe there are no ready-made, light weight solutions.

  Read the article

• Sparxsystems Enterprise Architect and issuses/tasks tracking system?

  - by peperg

  We (developement team 4 upto 7 people) use Sparxsystems EA for requirement analysis, modeling etc. Do you know any well-working methods to use EA and some task/issue tracking system like Redmine/Mantis/Trac ? The problem is not to duplicate functionality (there are issues/tasks/changes in Redmine and EA) but to have some user friendly interface (preffered web) to manage tasks and issues. By user-friendly I mean "my tasks" page add effort / time tracking easy "add issue" by everyone (simple bug tracking system) mail notifications

  Read the article

• Automatic time tracking with central server, web reports

  - by user124209

  I need a software for automatic time tracking on Windows. With the following features: It should record time spent using the computer each day. Start time and end time. It should record what programs the employee used and total time for that program for specified period of time. It must have a centralized server that collects and stores all data. It could be a cloud server outside of a company network. It must have a web interface for viewing the monthly reports (the last but the most important requirement!). A nice feature to have would be an automatic generation of timesheets and Mac OS X support. I am looking to use it for a small team, this is not for personal use. Does anybody knows about software with these features?

  Read the article

• Web-based (intranet / non-hosted) timesheet / project tracking tools

  - by warren

  I realize some similar questions have been asked along these lines before, but from reading-through them today, it appears they don't match my use case. I am looking for a web-based, non-hosted time and project tracking tool. I've downloaded Collabtive so far, but am looking for other suggestions, too. My list of requirements: runs on standard LAMP stack non-hosted (ie, there is an option to download and run it on a local server) not a desktop/single-user application easy-to-use - my audience is a mix of technical and non-technical folks easy to maintain - when time for upgrading comes, I'd really like to not have to rebuild the app (a la ./configure ; make ; make install) needs to support multiple users free-form project additions: we don't have a central project management authority (users should be able to add whatever they're working on, not merely from a drop-down) Does anyone here have experience with such tools? It doesn't have to be free.. but free is always nice :)

  Read the article

• Web-based (intranet / non-hosted) timesheet / project tracking tools

  - by warren

  I realize some similar questions have been asked along these lines before, but from reading-through them today, it appears they don't match my use case. I am looking for a web-based, non-hosted time and project tracking tool. I've downloaded Collabtive and Achievo so far, but am looking for other suggestions, too. My list of requirements: runs on standard LAMP stack non-hosted (ie, there is an option to download and run it on a local server) not a desktop/single-user application easy-to-use - my audience is a mix of technical and non-technical folks easy to maintain - when time for upgrading comes, I'd really like to not have to rebuild the app (a la ./configure ; make ; make install) needs to support multiple users free-form project additions: we don't have a central project management authority (users should be able to add whatever they're working on, not merely from a drop-down) Does anyone here have experience with such tools? It doesn't have to be free.. but free is always nice :)

  Read the article

• What's the best self-tracking software for Linux?

  - by trench

  I'm looking for a way to track myself and receive quality data upon which I can write future scripts/programs. For example, I use Google Reader a lot. I'd like to track the hrefs that garner my clicks. Further, I'd like to drop all of the words of each href into a database where they can be stacked in a hierarchical manner. At the end of the week I want to know that "Ubuntu" garnered 448 clicks and "Cheetos" garnered 2. :) That's just one example... I'd like this tracking and data-collecting to extend beyond my browser. I know writing something to do this myself wouldn't be too awfully difficult but if something already exists I'd happily use it. Thanks in advance. Primary OS: Ubuntu 10.04

  Read the article

• IT Inventory Tracking

  - by DrStalker

  What is a good tool to keep track of IT inventory? Systems that are installed and running, parts being ordered, that sort of thing. I'd love a central, web based system (preferably something we can customize) but my searching so far has resulted in a lot of dead open source projects that havn't been updated in a few years and poorly created commercial websites that don't do a very good job describing their product. The software doesn't have to be free or open source - a good commercial alternative is fine. It doesn't even need to be a web-based tool, that's just what I thought would be simplist to find and easiest to deploy. The number of assets that it will be tracking will be in the dozens, so it doesn't have to be a super high-end enterprise solution but it does need to do a better job than an excel sheet in a shared folder (which is our current "solution")

  Read the article

• Designing object oriented programming

  - by Pota Onasys

  Basically, I want to make api calls using an SDK I am writing. I have the following classes: Car CarData (stores input values needed to create a car like model, make, etc) Basically to create a car I do the following: [Car carWithData: cardata onSuccess: successHandler onError: errorHandler] that basically is a factory method that creates instance of Car after making an API call request and populating the new Car class with the response and passes that instance to the successHandler. So "Car" has the above static method to create that car, but also has non-static methods to edit, delete cars (which would make edit, delete API calls to the server) So when the Car create static method passes a new car to the successHandler by doing the following: successHandler([[Car alloc] initWithDictionary: dictionary) The success handler can go ahead and use that new car to do the following: [car update: cardata] [car delete] considering the new car object now has an ID for each car that it can pass to the update and delete API calls. My questions: Do I need a cardata object to store user inputs or can I store them in the car object that would also later store the response from all of the api calls? How can I improve this model? With regards to CarData, note that there might be different inputs for the different API calls. So create function might need to know model, make, etc, but find function might need to know the number of items to find, the limit, the start id, etc.

  Read the article

• Why isn't software as reliable as a car?

  - by Alex Angas

  I had a user ask me this question. We know that cars break down, but that's because of something physical (unless software is involved!). I tried to answer that software is a much younger industry, but the user countered with "didn't the automobile industry become much more stable than and reliable with less people?". I also tried to answer that software is more complex, but the user countered that there are many thousands of parts that make up a car. People that design and build cars generally just know their component(s) very well, but they still all end up working together as an end result. So, why isn't software as reliable as a car?

  Read the article

• car crash android game

  - by Axarydax

  I'd like to make a simple 2d car crashing game, where the player would drive his car into moving traffic and try to cause as much damage as possible in each level (some Burnout games had a mode like this). The physics part of the game is the most important, I can worry about graphics later. Would engine like emini or box2d work for this kind of game? Would Android devices have enough power to handle this? For example if there were about 20 cars colliding, along with some buildings, it would be nice if I could get 20 fps.

  Read the article

• Car Modelling for race game

  - by Mert Toka

  I am taking Computer Graphics course this semester and we have a video game competition. I am making racing game with simulated dynamics. Our professor told us that we don't have to do much of a modelling but since we haven't started the gaming part and since I have free time I want to model the car. My question is firstly which software do you recommend to design game components? I know Maya right now. Secondly, if I design the car or any other part, what should its polygon count in order to run game smoothly? I can design pretty much everything but I assume that it is hard to design low-poly models.

  Read the article

• Which online/hosted bug tracking tool do you use for your own work and projects?

  - by blueberryfields

  I've accumulated a lot of side projects over the years, which I slowly improve on over time. Whenever I return to one, I take some time reading over text files that include design, recent bugs, next features, etc... that I should be working on - it's not pretty. I'm looking to switch to something more formal. Ideally, this would be a full featured, online, bug tracking system, which allows for free or nearly free bug tracking for my own projects. Also, ideally this would be doable in a private manner - I don't really want everyone to see my side projects and what a mess I've made of some of them.

  Read the article

• No idea of how to simulate car crashes

  - by user2332868

  I have a simple car game with all the basic collision detection and movement in Unity with C#. But when I was building the "engine" for the game I didn't include a detail I later decided to include. I want the possibility so that cars can get damaged and so that the model can change. For example the car looked like it was new and after a crash it looks like a wreck. Please help me by pointing to some resources or by telling me approximate ways of implementing this new feature. Thanks!

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >