Search Results

Search found 5712 results on 229 pages for 'card'.

Page 3/229 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• No image from graphics card but image from onboard video

  - by ReAzem

  I have an HD 5970 running on a P8Z68-v LE motherboard and I have no image comming out of the graphic card. When I plug my screen on my motherboard, I see the bios and the OS. When I plug my screen on the graphic card, I don't see anything. I know that the graphic card works because I have tested it on another computer. I know the motherboard works because I tested it with another graphic card and it worked. I know that the graphic card works with the computer because I have another computer with a P8Z68-LE and an HD 5970. I know it is not an OS issue because I should atleast be able to see the bios. I have tried unplugging my HDDs so that the OS dont interfere with anything. Using a 1000W power supply Using another HD5970 on the computer works. So this is a problem with my HD5970, but why is the graphic card working on my other computer?

  Read the article

• Integrated video card not detected after installing new video card

  - by Jaime

  Hi, I got this emachines ET1331G-03W with a built in integrated video card (GeForce 6150SE). I added another video card (e-GeForece 6200 LE) in the hopes that I utilize both and have a dual monitor. But once the additional card was installed, windows 7 does not recognize the integrated video. Is it possible to use both video cards and have a dual monitor setup? Is there a switch on the motherboard that I have to turn on or off to enable the integrated video card along with the new card. Thanks!

  Read the article

• Is ThinkPad X61T SD card slot SDXC compatible?

  - by trismarck

  I have a Thinkpad X61T 7763 tablet and I was planning to buy a 64GB card for the SD card slot. The 64GB card supports the new SDXC standard and I'm not sure if the SD card driver / hardware can handle that. So far, I've successfully used 8GB cards in the slot, but they were SDHC ones. Thinkpad manuals don't give the answer. I wonder if anyone tried this configuration already and what was the outcome.

  Read the article

• Graphics card artifacting

  - by White Phoenix

  This is my current build: EVGA X58 (first generation) motherboard Intel i7 965 @ stock clocks 3x 2GB DDR3-1600 Corsair RAM at stock timings and voltages Corsair AX750 80 Plus Gold PSU 1 Optical Drive 1 Seagate 7200.10 500 GB drive 2x Western Digital Caviar Black 1 TB drives OCZ Vertex 1 60 GB EVGA GTX 460 Antec 1200 case HT-Omega Striker 7.1 Sound Card Windows 7 32-bit Professional (PAE Enabled) My graphics card started artifacting while I was playing a game. It artifacted, the display blinked, then I got an NVIDIA driver has crashed and recovered message. Kept going, more artifacts, another crash, but this time my display blanked out and I couldn't do anything. Restarted my computer - artifacting is in the BIOS - got to Windows 7 but it BSOD'd before I could even log in. I restarted the computer again - artifacts cleared themselves out and I managed to get to Win7, but it soon started blinking in and out and artifacting again. Checked the card temps and they're well within range. (50 idle, 70 full load) The ambient temperature here is about 80-85F with high humidity. Tried Safe Mode and it still froze up/BSOD'd. Already tried the following to fix this problem: - Reseat the graphics card and swapped in a different slot. - Removed cover on card and sprayed with compressed air to clean it out. - Swapped around memory and/or went with only using one stick at a time. - Underclocked card I called EVGA Tech Support and they said that the voltage on the 12V rail of my Corsair AX750 PSU was on the high end of the "acceptable" range (12.4V, highest within acceptable range is 12.6V - optimal is obviously 12V). They gave me an RMA number anyway, but I want to get a second opinion from you all before I send this thing off, as shipping from where I live to EVGA is kind of pricey. This PSU is only 6 months old. So that I don't have to play RMA tag, which case would be most likely? I'm strapped for cash at the moment so I want to reduce the amount of RMAs I have to do since shipping is expensive here. Is there any surefire way to test to see if it's really the graphics card or the PSU? I tried unplugging any devices that were connected to the 12V rail (except for my SSD and graphics card) as I do have 3 mechanical hard drives, but the voltage for that rail didn't drop (it remained at 12.4V). I'm fairly sure it isn't the drivers since I'm getting the artifacting at the BIOS too. Right now I'm back in Windows 7 but I don't know for how long until it messes up again. Any ideas?

  Read the article

• VM using a secondary graphic card

  - by Arthur

  Hi everyone, at the moment i have a dual monitor setup on my main PCIe gfx card. I know that on windows it is almost impossible to have a second card (eg no thrills PCI card) running without having an SLI motherboard because of a driver issue. Well this was my conclusion after many weeks of research. I was thinking...is it possible to use a VM in order to utilize the secondary card as the default video output to feed another monitor? let me know if you want me to clarify Thanks :)

  Read the article

• Does this video card support sound?

  - by Macros

  Probably a rookie question but here goes...I am looking to buy a new video card for a few year old PC which will be used as a media centre. The card I am looking at is this one http://www.ebuyer.com/product/173708, with the main aim being to play blu-ray films. In the product description it states that the card has 7.1 audio channel support, does this mean it will play the sound from the blu-ray through the HDMI, or do I need a separate sound card?

  Read the article

• constantly crash on video card

  - by Jason Paddle

  I have this problem with my graphic-card(video card). Video card constantly crash because driver stopped. This is the massage that i get: Display driver stopped responding and has recovered. Display driver NVIDIA Windows Kernel Mode Driver , Version 285.62 stopped responding and has successfully recovered. Video card : MSI GTX470 Twin Frozr Motherboard:Asus P8Z68 V-Pro Tried reinstalling drivers but doesn't help. Any ideas what can be ?

  Read the article

• Booting From VIA VT6421A Based PCI SATA Card

  - by Priyan R

  I bought a VIA VT6421A based SATA card for an 845 chipset based motherboard. The card is working i can access sata hdd from windows/linux. The problem is i can't directly boot from the sata card. My motherboard is award bios 6 based. I tried first boot as SCSI, its not worked. There is no Raid Bios screen appeared from the card. On searching i found , Add VT6421A bios to system bios as pci addon bios. I did it using cbrom6 , successfully added VT6421A bios to the existing bios. But now on booting instead of raid bios system bios showed Warning : something like cannot load add on rom for vendor id xxxx device id xxx . Whats wrong ? As the card is VT6421A based and i added VT6421A bios got from VIA website.

  Read the article

• Second video card (PCI) under Windows 7

  - by dbkk101

  I'm trying to get an old PCI video card (Diamond Stealth 2500) along with a normal PCI-E video card. In BIOS, there is a setting to switch between PEG/PCI or PCI/PEG on startup (PEG is PCI-E Graphics). When I use PCI/PEG only the old PCI card works, when I use the other one, only the new PEG card works. In PEG/PCI mode, Windows 7 recognizes the card and shows it in Device Manager as Standard VGA adapter, but it shows a warning for the device ("This device cannot start. (Code 10)").

  Read the article

• Bootable SD card still has small memory, even after formating

  - by Inazuma

  I have an SD card which I used to run my RaspberryPi. I wanted to update the copy of raspbian on it, so I formated the card using the software from www.sdcard.com. I followed all the instructions correctly, however the size of my SD card didn't go back to it's default. It is a 4gb SD card, which after it's spell in the RaspberryPi had shrunken to 52mb, which I understand is normal. After formatting, the size rose to 3.69gb. This means that there is not enough space to install a new OS, so how can I make my SD card 4gb again? Any help would be much appreciated!

  Read the article

• video card for only watching videos

  - by Nothing 2 Lose

  I recently quit gaming so I took out my (GeForce GTX 550 Ti) video card and switched back to the (cheap) integrated card because I don't want the dedicated card using up power & making unnecessary heat/noise. But now I get lag when I watch high-res movies, or when I open several videos at the same time, but I don't want to go back to my (big/expensive) video card because that seems like overkill. What is the smallest/cheapest card which will only be good enough for watching videos without lagging ? (but not for gaming) PS. My CPU is: AMD Phenom 9850 Quad-Core Processor

  Read the article

• Enlarge partition on SD card

  - by chenwj

  I have followed Cloning an SD card onto a larger SD card to clone a 2G SD card to a 32G SD card, and the file system is ext4. However, on the 32G SD card I only can see 2G space available. Is there a way to maximize it out? Here is the output of fdisk: Command (m for help): p Disk /dev/sdb: 32.0 GB, 32026656768 bytes 64 heads, 32 sectors/track, 30543 cylinders, total 62552064 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e015a Device Boot Start End Blocks Id System /dev/sdb1 * 32 147455 73712 c W95 FAT32 (LBA) /dev/sdb2 147456 3994623 1923584 83 Linux I want to make /dev/sdb2 use up the remaining space. I try resize2fs /dev/sdb after dd, but get message below: $ sudo resize2fs /dev/sdb resize2fs 1.42 (29-Nov-2011) resize2fs: Bad magic number in super-block while trying to open /dev/sdb Couldn't find valid filesystem superblock. Any idea on what I am doing wrong? Thanks.

  Read the article

• Multiplayer card game using PHP/Ajax and mysql

  - by Alireza Seifi

  I am designing a map game, using PHP and MYSQL. I don't know how to make the players who sign-in to the website to see other players who are also connected to the site and be able to chat with one another. I want to design the game in such a way that 2 players can play with each other and be able to send messages during the game while others groups are playing at the same time. I have designed the map game successfully, but the problem is making the player 1 who log-in to site to see the player 2 who will also log-in and both can get connected to play each other. http://i.stack.imgur.com/YyCPG.png I will appreciate your responses.

  Read the article

• Access files on Samsung Galaxy S3 external sd card using ubuntu 12.04

  - by nense

  I have a Samsung Galaxy s3 running the stock Samsung ROM and I'm trying to transfer files - videos, photos, music and downloads, from my handset to my system via USB running Ubuntu 12.04. I have followed to links suggested How to connect Samsung Galaxy S3 via USB? But it all goes over my head. Can anyone help me with a simple GUI program or a link so I can simply copy and paste selected files from my phone onto my system?

  Read the article

• Running PCIE card with the on board video card as well in Windows 7

  - by Russ Johnson

  I have an emachines Windows7 PC. I am trying to run the on board video card along with the dual DVI card I installed in the PCIE slot. In CMOS it shows the on board card as disabled and it will not let me enable it? Its greyed out so I cant even highlight it to change anything. I have done this before in XP on a few different machines so I know its possible, Any idea?

  Read the article

• SD Card reader not working on Sony Vaio

  - by TessellatingHeckler

  This laptop (Sony Vaio VGN-Z31MN/B PCG-6z2m) has been installed with Windows 7 64 bit, all the drivers from Sony's VAIO site are installed, and everything in Device Manager both (a) has a driver and (b) shows as working, no exclamation marks or warnings. "Hide empty drives" in Folder options is disabled so the card reader appears, but will not read the card ("please insert a disk in drive O:"). Previously, when the laptop had Windows XP on it, it could read the same card. Also, Windows update suggested driver ("SD Card Reader") doesn't work, Ricoh own drivers install properly but do the same behaviour. Other 3rd party driver suggestions from forums (Acer and Texas-Instruments FlashMedia) do not seem to install properly. I would post the PCI id if I had it, but it was just showing up as rimsptsk\diskricohmemorystickstorage (while it had the Ricoh Driver installed). Edit: If there are any lower level diagnostic utlities which might shed more light on it I'd welcome hearing of them. Anything which might show get it to put troubleshooting logs in the event log or identify chipsets or whatever... Update: Device details are: SD\VID_03&OID_5344&PID_SD04G&REV_8.0\5&4617BC3&0&0 : SD Memory Card PCI\VEN_8086&DEV_2934&SUBSYS_9025104D&REV_03\3&21436425&0&E8: Intel(R) ICH9 Family USB Universal Host Controller - 2934 PCI\VEN_1180&DEV_0476&SUBSYS_9025104D&REV_BA\4&1BD7BFCD&0&20F0: Ricoh R/RL/5C476(II) or Compatible CardBus Controller RIMSPTSK\DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00\MS0001: SD Storage Card PCI\VEN_1180&DEV_0592&SUBSYS_9025104D&REV_11\4&1BD7BFCD&0&24F0: Ricoh Memory Stick Host Controller WPDBUSENUMROOT\UMB\2&37C186B&1&STORAGE#VOLUME#_??_RIMSPTSK#DISK&VEN_RICOH&PROD_MEMORYSTICKSTORAGE&REV_1.00#MS0001#: O:\ STORAGE\VOLUME\{C82A81B8-5A4F-11E0-AACC-806E6F6E6963}#0000000000100000: Generic volume PCI\VEN_1180&DEV_0822&SUBSYS_9025104D&REV_21\4&1BD7BFCD&0&22F0: SDA Standard Compliant SD Host Controller ROOT\LEGACY_FVEVOL\0000 : Bitlocker Drive Encryption Filter Driver PCI\VEN_1180&DEV_0832&SUBSYS_9025104D&REV_04\4&1BD7BFCD&0&21F0: Ricoh 1394 OHCI Compliant Host Controller Now going to search for drivers for that.

  Read the article

• How to rescue from an SD (SDHC) card that I can't reformat (possible hardware failure)

  - by sbwoodside

  I have a transcend 16GB SDHC card and a lot of photos on it that I'd like to recover. When I plug it into the SD card reader, it takes a while for the Mac to even recognize that there's a disk present, and it shows up as 1.07GB with geometry 520/64/63 (according to fdisk). First I tried file recovery: PhotoRec: no files are found (the images are in CR2 format and I'm using testdisk-6.14-WIP which claims to recognize that format under TIF) dd / ddrescue: they create a 1.07GB image, same problem as above TestDisk: doesn't find any partitions to recover I found a source saying that the correct geometry for this type of SD Card is Heads 255, Sectors/Track 63, Cylinders 1953, so I tried manually setting that geometry in PhotoRec/TestDisk. No improvement. Next I tried formatting the disk with fdisk. After writing and quitting, I ran fdisk again and it reported that the new format hadn't been saved on the disk. I also tried resetting the format/partitions with TestDisk and that failed also. The fdisk log is below. I don't really care about the card, I've already ordered a new SanDisk card. But I'd like to get the data off. Maybe, is there any way to force dd or some other tool to create an image of the disk based on the original geometry and not on what the card "thinks" its geometry is? Or am I missing something?

  Read the article

• Can't access server sound card when vnc'd into ubuntu server

  - by Corey Kennedy

  I've set up my ubunutu 10 server with xfce, nxserver, and now tightvncserver so that I can control it remotely from my Windows 7 laptop. NX is working fine for remote access, but when I run (for example) exaile, no sound will be sent through the server's sound card. I installed tightvncserver and connected, but ran into the same problem. Exaile opens, sound isn't muted, I can see that sound cards are installed (via cat /proc/asound/cards), but I can't seem to get the remote sessions to access the server's sound card. Also, just to confirm that the sound card was working I hooked up a montior/keyboard to the server and opened a local xfce session. That worked fine. While I had the local session running, I was also able to open a remote session with NXClient and start exaile - which then successfully piped sound to the local card. After disconnecting the monitor/keyboard and moving the box back to its normal spot, though, I was not able to play sound via either an NX or VNC session. Does anyone have any suggestions? Surely it's possible to configure my remote sessions to pipe sound to the server's sound card, right? Or at least get xfce up and running without a monitor or keyboard but with access to the sound card so I can VNC into it? Thanks!

  Read the article

• Computer won't start after installing new video card

  - by Vercas

  So, 1 year and 340 days ago I bought a desktop computer. Since then, it has served me well. But lately, I wanted an upgrade, so I bought a new video card. I documented myself about the compatibility, and it is okay. So I opened the case, cleaned up that... dust elemental living inside of it. Unscrewed the plastic thingie on the outside to unscrew the old video card. Because of the stupid arrangement of the ports, I had to unscrew the motherboard to unplug it. So I unscrewed it, removed the old card, put in the new one, moved the motherboard back, screwed it back in, screwed the video card on the holder... thingie, and screwed the plastic thingie back in. Everything went smoothly, nothing had to be forced in/out. I connected the external power supply, closed the computer case, put the tower back in it's place and all the cables back in. When I pressed the power button, the LED turned... some color I can't distinguish. It stayed that way for a second, and then it went off. I tried a bunch of things, including permuting the external power supply arrangement (1 connection, 2 connections and no connections), with no success. And here are some of the specifications: Motherboard manufacturer: Asrock Processor: AMD Athlon II X2 3.0 GHz RAM: 2 x 2GB (had only 1 initially, bought the second plate a bit later) OLD video card: AMD Radeon HD 5450 NEW video card: Gigabyte nVidia GeForce GTX 650 GPU, 1GB GDDR5 128bit PCI-E, Dual-link DVI-Dx2 / HDMI / D-Sub Power supply: 450W + all the requirements I managed to find on the internet are met (+12V 18A or something) More specific information is stored... On that computer. If required, I may open the case again and read the stickers to find more specific information. I can also provide photos if necessary. Any ideas? Suggestions? Something? :|

  Read the article

• Fried graphics card, how to proceed ?

  - by user19496

  Motherboard: Biostar TPower I45 I fried my graphics card (white smoke), by removing the cable marked PCI-E from the card, and then booting. Removed the graphics card, and now the machine is booting, and I can ping it. However I have no possibility to see what is actually happening, because I can't attach a monitor. Can I workaround the lack of monitor in some way, just to see if the motherboard is fine, attach a cable and telnet in or any other way ? Or, do I have to buy and install a new graphics card to be sure ?

  Read the article

• Cannot format SD memory card

  - by cool

  Hello everyone I have a SD memory card which is of local manufacturer it allows to read & copy from it but not write as it is now write-protected so i want to format that card but could not. To format this card I have tried 1) DD command 2) mkfs -f vfat command 3) creating registry entry under storage device policy in window with write value 0 4) disk part command in window to clear attributes in which it show all attributes are clear ie no write protection 5) I format card in windows through control panel - administrative tools- computer management - disk management, then it show as formatted but when I tried to create new partition it give CYCLIC REDUNDANCY CHECK error 6) I downloaded a format utility from transcend site and formatted first it shows write protected again doing format it formats and tells to remove and reinsert after reinsertion it shows the previous data as it is

  Read the article

• New graphics card (GTX 760) slowing down entire PC

  - by Cayetano Gonçalves

  My new graphics card is making my PC totally unusable. It boots up really slowly, and when the windows screen comes on, the mouse lags really far behind. Nothing opens at a normal speed. However, when I put in my 5-year old graphics card, it all works fine. I'm currently using a Foxconn Renaissance LGA 1366 Intel X58 ATX Motherboard, Intel Motherboard Intel Core i7-950 Bloomfield 3.06GHz LGA 1366 130W Processor, and a EVGA SuperNOVA 850G2 80PLUS Gold Certified ATX12V/EPS12V 850W Power Supply . I know it can't be the power supply, because I just bought it today to try to fix the problem. I've also installed the newest version of BIOS available for my motherboard. I've also seen extreme variations in CPU while the new graphics card is in, and when the old graphics card is installed, it is much calmer. Any thoughts?

  Read the article

• Old PCI Video Card and PCI-Express ATI Radeon HD 4200 Pro Living Together

  - by Adam Driscoll

  I have two video cards installed in a Dell Optiplex 745. The PCI card is from 2001 and I was hoping to be able to install it, allowing me to have 3 monitors. The Radeon is already running two itself. The problem is that when I boot the box with default BIOS settings the PCI card displays video to the single display but not the other two. In device manager I can see that both video cards are visible with drivers loaded correctly but underneath monitors I only have a single Generic PnP monitor from the VGA connection to the PCI card. If I switch the BIOS setting to force PCI-E I get the Radeon to display to the two other monitors. When I check device manager with this configuration I see that the PCI card displays an error saying the driver could not be started. Any ideas?

  Read the article

• Nvidia Graphics Card for Encoding and Video editing?

  - by TheLakersHighlights

  I need the best Nvidia Graphics Card for Encoding and Video editing. The budget is anything lower than $75. I need the card to be able to play 1080p videos full screen, and encode HD videos quickly and smoothly. Whats the best card for me? OS: Windows 7 Ultimate 32bit

  Read the article

• Upgrade the Graphics Card for a Dell Dimension 3100

  - by Pat Foran

  Hi, I have a Dell Dimension 3100 Desktop with a 128MB Graphics Card Integrated into the Mother Board. I need to upgrade this 128MB to at least 256MB or 512MB if the system will support same. I am told by Dell that all I have is a PCIx1 slot and that they do not stock a Graphics Card for this. I was told to shop around at Amazon and ebay etc and I would find one there. I have shopped around for some time now and do not know exactly what I am looking for. There are several PCI Graphics Card out there but which one would be the correct one for a Dell Dimension 3100. Can you help me resolve this problem. If you know of a PCIx1 card that will sort out my problem you might please let me have all the details for to purchase it. Regards, Pat,

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >