Search Results

Search found 240 results on 10 pages for 'carl 1789'.

Page 3/10 | < Previous Page | 1 2 3 4 5 6 7 8 9 10  | Next Page >

• Problem installing Cardbus/PCMCIA drivers (USB 2.0 2-port)

  - by Carl

  I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

  Read the article

• Make server unavailable gracefully using Powershell in ARR

  - by Carl Bergquist

  We are using ARR as reverse proxy and I would like to make a server unavailable for various reasons. How can this be done using Powershell? Edit 1: I found this http://blogs.iis.net/anilr/archive/2009/11/09/using-arr-config-extensibility-to-gracefully-stop-server.aspx tutorial for using JScript. But I'm not able to translate it to powershell. Edit 2: Using the Set-WebConfigurationProperty in WebAdministration module I'm able to changes settings for a server. I found SetState in %windir%\system32\inetsrv\config\schema\arr_schema.xml but I don't know how to invoke that method.

  Read the article

• SQL Server Change Tracking between two Express servers?

  - by Carl Hörberg

  Can I replicate my data (sql server 2008 express) using SQL Server Change Tracking to a read-only server?

  Read the article

• Does an ADFS v2 server have to be on the actual domain server?

  - by Carl Hörberg

  Can an ADFS v2 server be installed stand-alone, or is it tightly coupled with the AD server?

  Read the article

• Installing Ubuntu to a USB drive

  - by Carl Smotricz

  I'm having a rough time getting Ubuntu to run from a 250 GB USB hard drive. I booted Ubuntu 9.10 from a CD and ran the regular "install" to the attached USB drive. I used the "advanced" option on the drive partition question to put the boot loader on /dev/sdb (the USB disk) but when I boot the machine it doesn't recognize there's a boot loader on the USB drive (it offers to boot from 2 other devices but not the USB disk). I also tried booting from the Ubuntu CD and using usb-creator-gtk to set up the USB drive. Seems to me this is meant to work with flash drives. I got a bootable USB disk but it looked and worked like the CD, i.e. it gave me options of "live CD" operation, installing, memtest, etc. That's not the way I want to run the system. Some help in installing Ubuntu, bootable into a "full" running system on my USB drive would be appreciated.

  Read the article

• Device Manager - does USB listing look right?

  - by Carl

  I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

  Read the article

• Why does USB thumb drive screw up boot sequence?

  - by Carl B

  I am looking for understanding to a boot issue. I have at times had some files and such that I save and retrieve from my thumb drive. I use the front panel as it is nice and easy to get to and I typically power down my system nightly. If I forget to pull the drive and power on the system, it becomes the first bootable device. As there is no OS on the USB Drive I get the BOOTMGR is missing press CTRL+ALT+DELETE. When I go into BIOS to see Boot sequence, there’s the thumb drive up top, DVD drive is missing and not found in the list of devices. All of the hard drives are next in line. When I pull the USB drive, and reboot, everything is back to normal. Old boot sequence is in place, DVD drive right where it should be and no issues. So why does this happen with a USB drive in port at boot up? If it can’t be booted from, shouldn’t the next drive be attempted? Note: This happens when the thumb drive is plugged into a USB port on the front panel. It does not seem to happen on rear panel ports.

  Read the article

• Hyper-V Network Boot Legacy Network

  - by Carl

  Hi, I am planning out a Hyper-V R2 Cluster environment. I was wondering if I went to the effort of deploying one of the few methods to network boot from iSCSI inside the guests, whether the legacy network adapter would switch to a synthetic after boot, or whether the connection could be handed to a synthetic network after boot? This is obviously for performance reasons. MS suggests that some emulated devices are capable of switching to synthetic with integration services after boot, but doesn't specifically list all which are capable.

  Read the article

• Bad resolution from Displayport converter on third of three screens

  - by Carl

  I am currently using three screens at the same time with my ATI 5770 & an active Displayport converter. The thing is that the third screen (the one using the active Displayport converter) is showing terrible resolution compared to my other two screens. The third screen is a Samsung Syncmaster P23. Two of my screens have a max resolution of 1920x1080, meanwhile the third on is only capable of 1600x1200. Do any of you know a solution to this problem?

  Read the article

• Computer locking up, looking for bootable hardware diagnostic tool.

  - by Carl Menke

  Well today I helped my friend build a computer. All went pretty well until we got to installing Win7. Thing is, we thought, it was crashing constantly. I adjusted pretty much every setting in the BIOS and removed as much hardware as possible to try and prevent a crash. No dice. So far I've tried running an Ubuntu live cd without the harddrive installed. Nope, crashed on boot. And then I just tried Microsoft's ram utility disk and it eventually locked up on that (the ram passed though). So it seems to me like it's either the CPU (AMD PhenomII x3) or the motherboard that could be bad, but I don't know how to test them individually for problems. I thought it could be a overheating issue, but the BIOS reports that the CPU temp is fine idling around 34C. Any advice or diagnostic disk that could help me out? TL;DR: Computer locks up frequently during use (cannot even boot/install an operating system), memory is fine, probably CPU or Mobo, BIOS says CPU temps are fine. What should I try?

  Read the article

• Thin client - cloud machine - to run via iPad, iPhone, most Androids etc

  - by Carl Lindberg

  I'm tired of having a laptop macbook that breaks down or having files that I need to sync via dropbox etc all the time via the machines to different OS installations. It sucks. I want a thin client where I can login on any machine - my iPhone, PC desktop, iPad etc to one running machine. I would like to replace a modernly powerful desktop iMac with a thin client running via my iPad. I will connect the iPad with a keyboard/mouse too so you get the idea. But I want to be able to use some of the Android phones as well (I guess most Android phones today has a good enough performance/resolution etc to run a thin client). Of course it has to be able to have input/output in sound. Printing can be solved by PDF/emailing etc - so no direct communication to the printer ports to USB etc is necessary. Is there such a service today? It should cost somewhere under something like $40/ month. I will run stuff like CPU heavy duty ableton for music production, xCode for making iOS apps, some games etc. And on the thin client also run virtual machines. VM of Ubuntu and Windows.

  Read the article

• Need software to save videos from 4tube.com - to watch the videos smoothly

  - by Carl

  Isn't there a programs that will capture screen writes at the hardware level? I have tried several Firefox add-ons, and several stand-alone programs, and none of them will save videos from this site. I even paid for Replay Media Catcher, and it didn't work, so I got a refund. (The website for the best Firefox video downloader I have, Downloadhelper, said Replay Media Catcher worked with that site.) I have a slow internet connection, and cannot watch videos smoothly unless I can cache them. This site (4tube.com) doesn't cache, when you restart, it reloads, when you pause it stops - so I need to be able to save the videos to be able to watch them.

  Read the article

• Windows installation repair option not showing up

  - by Carl

  I'm trying to repair an existing Windows XP installation. Following the instructions from http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx this should work: When the Press any key to boot from CD message is displayed on your screen, press a key to start your computer from the Windows XP CD. Press ENTER when you see the message To setup Windows XP now, and then press ENTER displayed on the Welcome to Setup screen. Do not choose the option to press R to use the Recovery Console. In the Windows XP Licensing Agreement, press F8 to agree to the license agreement. Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP. Follow the instructions on the screen to complete Setup. On step 5 pressing R does nothing and there is nothing on the screen saying it would. When I just select to install I get a message that a previous installation is there and proceeding will destroy it and installed applications, I can optionally select a directory other than c:\windows, and I can optionally format before continuing. I had tried to go from SP2-SP3. It failed, and then I couldn't get to Safe Mode. I put the SP1 disk back in to do a repair, and I don't see that option. (I don't have an SP2 boot/install disk, I just have the non-boot upgrade package.) UPDATE: Upon loading the Recovery Console, I get a message saying The system registry does not appear to have an active ControlSet key. The system registry may be damaged. You can try restarting it with the Last Known Good configuration or you can try repairing the installation of Windows using the setup program's repair and recovery options. I then did bootcfg /scan - "successful" ... Total installs: 1 ... [1] c:\windows - with the c:\windows command prompt below it. bootcfg /list gives [1] Windows XP Pro; OS Load Options /noexecute=optin /fastdetect; OS Location: c:\windows I followed the instructions at http://michaelstevenstech.com/XPrepairinstall.htm - "Warning 2" link copy E:\i386\ntldr C:\ copy E:\i386\ntdetect.com C:\ attrib -h -r -s C:\boot.ini del C:\boot.ini BootCfg /Rebuild I added /fastdetect when it asked for options. I re-ran Windows setup - no change - no repair option. UPDATE: I followed the procedure at http://support.microsoft.com/default.aspx?scid=kb;en-us;307545 I rebooted. I now get a quick message on bootup to select the boot - 1: [blank] ; Windows XP Professional ; Windows Recover Console. The "1: " is new. The rest is the way it was when all was okay. Selecting 1: and the next one gives the same result - I get to a login icon, and then it asks for a password, with the blinking cursor, but I can't type anything. I reboot with the Windows CD. Now I see a repair option for installation "1: " I selected R on that, and it did "Setup is copying files..." and rebooted when it was done. Then it booted, and I got a window saying "Setup will complete in approximately 39 minutes." That's where I am now. I wasn't expecting this last part - I did a repair several months ago and I don't recall that. UPDATE: Booted up. Asked if I wanted to register Windows online. All my icons are there, and the old desktop documents. Good. All the applications I tried from the Start Menu work (tested a few), except Corel Photopaint - I get registry entry not found errors. Windows ran for a while, then froze. The mouse and keyboard don't work. Pressing the power button got Windows to shut down. I probably need to put SP2 on it, and then all the updates for my laptop for XP Pro SP2 (drivers), there's a bunch. The mouse and keyboard quit working again. That wasn't a problem when I first set up this laptop. I've ran 4 times now. Two mouse/keyboards hangs by pressing Ctrl-C (to copy text from a notepad document), and two by selecting Start-Run (wasn't able to type anything in the box).

  Read the article

• Where to get glib-config for Kubuntu?

  - by Carl Smotricz

  I'm trying to compile Midnight Commander on a KUbuntu 9.10 (Karmic) box with no root access. I've set up a directory under $HOME, downloaded the mc source package and various stuff required for building, such as autotools. I've unpacked the CONTENTS of all those packages into this working directory such that I have the usual ./usr, ./lib, ./etc hierarchy. I manage to get configure through a lot of tests, but I can't seem to fool it into finding glib. checking for glib-2.0... checking for glib-config... no checking for glib12-config... no checking for glib-config... no checking for GLIB - version >= 1.2.6... no *** The glib-config script installed by GLIB could not be found *** If GLIB was installed in PREFIX, make sure PREFIX/bin is in *** your path, or set the GLIB_CONFIG environment variable to the *** full path to glib-config. configure: error: Test for glib failed. GNU Midnight Commander requires glib 1.2.6 or above. My system has glib installed: /lib/libglib-2.0.so.0 /lib/libglib-2.0.so.0.2200.3 ... and I've also downloaded and unpacked the glib package into my working directory: libglib2.0-0_2.22.2-0ubuntu1_i386.deb libglib2.0-dev_2.22.2-0ubuntu1_i386.deb ... but still the elusive glib-config is nowhere to be found. It's not in any debian package for Karmic, either. So I'd appreciate any help getting over this hurdle. Please note, again, that I don't have root, so I can't just merrily apt-get stuff.

  Read the article

• Windows SMTP server settings reverted after Windows Update

  - by Carl Hörberg

  Not once but twice in a week, why are Microsoft doing this?! :( Can you lock the settings or something?

  Read the article

• Facility setting for syslog 'client'

  - by Carl Summers

  What are the things one should consider when setting the facility for a syslog client? In particular is there a difference between "4 security/authorization messages" and "10 security/authorization messages"? I'm configuring a DataPower XS40 appliance.

  Read the article

• Hypertransport sync flood error

  - by Carl B

  What is it? And what causes it? Is it only for uncorrectable DIMM Errors(Troubleshooting DIMM errors)? When an UCE occurs, the memory controller causes an immediate reboot of the system. During reboot, the BIOS checks the Machine Check registers and determines that the previous reboot was due to an UCE, then reports this in POST after the memtest stage: A Hypertransport Sync Flood occurred on last boot 3 BIOS reports this event in the service processor’s system event log (SEL) as shown in the sample IPMItool output There are what seems to be some suggested answers to include Bad Caps Bios verisons (happens in one version not the other) Graphics card issues Lack of power to the CPU The list of possible generators seems to target everything but the computer case. System Specs: Windows Home Premium 64 Motherboard - MSI790FX-GD70 (MS7577) / Bios v 1.9 (American Megatrensa Inc) Ram - Patriot G Series ‘Sector 5’ Edition 4GB DDR3 1600 CPU - AMD Phenom II X2 555 Black Edition Callisto 3.2GHz Socket AM3 80W (Note: unlocked 2 cores CPU Z ids it as phenom II x4 B55) Graphics - 2 x Radeon 5750 in crossfire PSU - ABS 900w HDDs - 2 Seagate 1.5 TB Sata SSD - 1 OCZ 120 GB Vertex Plus R2

  Read the article

• Does a USB to RJ-45 console cable exist?

  - by Carl Flippin

  I am aware of the RJ-45 to DB9 adapter commonly used on cisco routers to access console. I am aware of the USB to DB9 adapters to allow laptops without serial to get a serial port. I am looking for a USB to RJ-45 adapter so I don't have to chain two adapters together. I have searched everywhere but even the pre-packaged solutions seem to have the two adapters chained together. Does such a thing exist? If it doesn't is there some technical reason it cannot? It seems like a manufacturer would just have to wire the DB9 end of the USB adapter differently and it would work just fine plugged straight into the console port of the router.

  Read the article

• Finding underlying cause of Window 7 Account corruption.

  - by Carl Jokl

  I have been having trouble with my Sister's computer which I built. It is running Windows 7 Ultimate x64. The problem is that I have had problems with the accounts becoming corrupted. First problems manifest themselves in the form of Windows saying the profile failed to be loaded properly and a temporary profile. Eventually the account will not allow login at all. An error message along the lines the authentication service failing the login. I have found information about this problem and how to fix it. The problem being that something has corrupted the account profile and backing up and recreating the accounts fixes the problem. I have been able to fix things and get logins working again but over the period of usually about a week it happens again. Bit by bit the accounts corrupt and then it is back to square one. I am frustrated because I don't know what the underlying cause of the problem is i.e. what is causing the accounts to be corrupted in the first place. At the moment I am just treating the symptoms. I was hoping someone who may have more experience with dealing with this problem might be able to help me find the root cause. Some articles suggest that Norton Internet Security is a big culprit of this problem which is installed. I could try uninstalling Norton and see if it helps. The one thing which is different about this computer to any other I have built is that it has a solid state drive. Actually it has both a hard drive and solid state drive. The documents and settings i.e. the Users directory is stored on the hard drive. This was done following an article about moving the user account data onto a separate drive on Windows 7 which I found on the Internet. Moving the User accounts is more of a pain under Windows 7 and this solution involved creating a low level file system link to the folder from the boot drive (Solid State) to the Hard Drive. The idea is that the computer behaves just as if it is accessing the User's folder from the boot drive but actually the data is stored on the hard drive. This may have nothing to do with the cause of the problem but due to the problem being user account corruption it is a possibility I have not been able to rule out. Any help would be appreciated as I would be glad to see the back of this problem.

  Read the article

• Bad Resolution. Running Three screens at the same time

  - by Carl

  Hi I am currently using three screens at the same time with my ATI 5770 & an active displayport converter. The thing is that the third screen ( the one that is using the active displayport converter ) is showing terrible resolution compared to my other two screens. ( Samsung syncmaster p23 ) two of my screens got a max resolution of 1920* 1090, meanwhile the third on is only capable of 1600 * 1200. Do any of u guys got any solution to this problem? Btw, This is how the Active Displayport converter looks like http://accessories.us.dell.com/sna/products/Cables/productdetail.aspx?c=us&l=en&s=dhs&cs=19&sku=330-5521#Overview

  Read the article

• Problem with USB drivers (Windows-XP)

  - by Carl

  I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

  Read the article

• How can I tell my dd-wrt router to use someone's Amazon Affiliates link when I point my browser to amazon.com?

  - by Michael Paul

  Here's what I'd like to do. Instead of a one-time donation to one of my favorite free tools (junecloud.com) I'd like to do what they suggest here and use their Amazon Affiliates link to do all my Amazon shopping. I shop at amazon once or twice a week, so this is a great way to let them earn lots of long-term cash without me dropping a dime. My thought was to go into my dd-wrt enabled router and tell it, "any time I go to amazon.com on any computer in the house, please go to http://www.amazon.com/gp/redirect.html?link_code=ur2&tag=junecloud-20&camp=1789&creative=9325&location=%2F instead. (That URL simply redirects me to amazon.com but every purchase I make during that session is credited to JuneCloud.) Once logged into dd-wrt, I went to Services Services DNSMasq but I'm not really sure how to get it to work from there, or if it's even possible. I know I can redirect IP addresses, but I'm looking to redirect someone on my network from amazon.com to the special amazon affiliate code link. Hope that's clear. Thanks for any replies!

  Read the article

• Scriptable Amazon S3 windows client?

  - by Carl Hörberg

  Quick question, simple console client for Amazon S3 at Windows?

  Read the article

• What would cause a CMD window to open after windows starts?

  - by Carl B

  As of the past few weeks, when I start windows, A CMD window opens and stays open after all the programs and applications launch. I have just been exiting or closing the box, but I have been wondering what would cause it to open in the first place? I have checked to see what is in start up (and I have been looking for CMD or RUN) but I don't see anything out of the ordinary. How can I get this to stop? I have windows 7 Home premium 64.

  Read the article

• Why would changing httpd.conf work for me, but .htaccess would not? [closed]

  - by Carl Rempel

  I have html files which contain PHP. When I use filename.php they work great. When I use filename.html the entire file renders as plain text. If I add the following line to my .htaccess, the file still appears as plain text. AddType application/x-httpd-php .php .html But ... if I add the the exact same line to my httpd.conf, then PHP renders my page correctly. What are some possible explanations as to why the .htaccess would not work for me? I'm using apache OS X, Snow Leopard.

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10  | Next Page >