Search Results

Search found 9285 results on 372 pages for 'disk imaging'.

Page 3/372 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Internal disk not correctly recognised by Windows 7

  - by david

  i'm having problems configuring a disk in a brand new, clean windows-7 install. here are some system specifics- . disk- western digital velociraptor wd6000hlhx . mobo- gigabyte z77x-ud3h . bios sata-mode set to ahci [not raid], w/disk connected to sata0 [6gb/s hi-speed sata]. . windows 7 enterprise sp1 x64 the disk is recognized by bios and correctly identified [name & size ok]. the disk is also recognized by windows on a h/w level, but it won't show up in the explorer. windows reports the device is working correctly. windows disk manager shows the drive, but says it's uninitialized and has no partitions [which is incorrect]. if i try to initialize the drive, windows throws an error saying that it "cannot find the file specified". [which file???] before connecting the drive to the new machine, i partitioned and formatted the disk under windows xp sp2, giving it 2 partitions [mbr, not gpt] and copying over a boatload of data. obviously none of this appears under windows 7. removing the disk from the new machine and replacing it back in the windows xp machine shows the disk and all data are intact and functional. i'd like to have windows 7 recognize the disk w/o having to lose the data and start over. is this possible? if so, how would i do that? I checked this post, but even though the problem seems identical, the information didn't help. any help appreciated. thanks!

  Read the article

• scheduled chkdsk on Windows 7 blinking the hard disk light every 5 seconds, what can I do?

  - by Jian Lin

  PG&E (the local electricity company) came and took out the old power meters and put in a new ones by brute force and with no advance notice in our neighborhood, so my computer went down in power. So I went to Windows 7's drive C and schedule a Disk Cleanup (chkdsk) on the next boot up. When it boots up, it says A disk check has been scheduled To skip disk checking, press any key within __ second(s). and then after it shows To skip disk checking, press any key within 1 second(s). it just sits there, with no further message. the hard disc light blinks every 5 seconds. So what is to be done now? I certainly don't want to brute force power off again.

  Read the article

• Test disk recovery

  - by AIB

  I had a 250GB hard disk having several NTFS partitions. The disk was a dynamic disk (created in windows). Now when I formatted windows (which was in another disk), the dynamic disk is shown as offline. I tried using the testdisk tool to recover the data and created a partial backup. Testdisk is able to list all partitions in the disk. All partitions are shown as type 'D' (Deleted). I want to change the 'D' to 'P' (Primary), 'L'(Logical), 'E' (Extended) appropriately and build a new partition table. If I can write the partition table to disk, the disk will be of 'basic' type and should be readable in all OS. What should be the appropriate partition types? I checked the files on the partitions and no OS was ound. So none of the partitions were bootable. Will randomly selecting P,L,E hurt the data in anyway?

  Read the article

• Out Of disk, but still boots

  - by LinuxPCplus

  I have a HP Compaq nx6310 notebook wth 4gb memory & a new 250gb hdd. After installing Ubuntu 12.04, i got an "out of disk" error & was unable to boot. I rebooted in live, instaled & ran Boot Repair then rebooted. Grub menu loaded fine, followed by "out of disk.....press any key to continue". I pressed a key & Ubuntu booted, a bit slow but still booted. So here are my questions: 1- Since Ubuntu DOES boot, should I just leave it alone? 2- If I need to fix this, HOW do I do it? 3- What causes this error? $wolf@lpc-1:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 230G 9.1G 209G 5% / udev 1.6G 12K 1.6G 1% /dev tmpfs 655M 868K 654M 1% /run none 5.0M 0 5.0M 0% /run/lock none 1.6G 260K 1.6G 1% /run/shm wolf@lpc-1:~$

  Read the article

• Using old RAID configured disk after new disk has been used in the controller

  - by Narendra

  I have Dell Poweredge T100 server with Dell SAS 6 and two hard disk on RAID 1. Last week the server died including one RAID 1 hard disk. We sent the server for repair and the problem with PSU was fixed. But the repair guys also checked the RAID controller by configuring new RAID with their test hard disk. Now if I install one working RAID 1 disk and one new disk, will the RAID controller let me continue my old RAID 1 and resync the new disk and continue? What I fear is the RAID controller will want the test hard from repair guys. Thus I have to re configure RAID 1 forcing me to wipe the working disc. If so, I've to backup the working disc, reconfigure RAID 1 and reinstall? Or is there better way? Note: I'm using DELL SAS confiugratio utility to manage RAID. (Press CTRL+C after BIOS)

  Read the article

• Recover data from a Windows Dynamic Volume Spanned Disk

  - by iCe

  I have a dynamic volume created with two spanned partitions over two disk. Recently, one disk has started failing, and I want to copy the data inside that disk to another disk, before replacing it. However I don't know how to select only what is inside the failing disk, because the partitions spans across both disks. Maybe imaging the entire disk should do the work? Or I have to copy all the data from both disks? Thanks in advance!

  Read the article

• Decrease in disk performance after partitioning and encryption, is this much of a drop normal?

  - by Biohazard

  I have a server that I only have remote access to. Earlier in the week I repartitioned the 2 disk raid as follows: Filesystem Size Used Avail Use% Mounted on /dev/mapper/sda1_crypt 363G 1.8G 343G 1% / tmpfs 2.0G 0 2.0G 0% /lib/init/rw udev 2.0G 140K 2.0G 1% /dev tmpfs 2.0G 0 2.0G 0% /dev/shm /dev/sda5 461M 26M 412M 6% /boot /dev/sda7 179G 8.6G 162G 6% /data The raid consists of 2 x 300gb SAS 15k disks. Prior to the changes I made, it was being used as a single unencrypted root parition and hdparm -t /dev/sda was giving readings around 240mb/s, which I still get if I do it now: /dev/sda: Timing buffered disk reads: 730 MB in 3.00 seconds = 243.06 MB/sec Since the repartition and encryption, I get the following on the separate partitions: Unencrypted /dev/sda7: /dev/sda7: Timing buffered disk reads: 540 MB in 3.00 seconds = 179.78 MB/sec Unencrypted /dev/sda5: /dev/sda5: Timing buffered disk reads: 476 MB in 2.55 seconds = 186.86 MB/sec Encrypted /dev/mapper/sda1_crypt: /dev/mapper/sda1_crypt: Timing buffered disk reads: 150 MB in 3.03 seconds = 49.54 MB/sec I expected a drop in performance on the encrypted partition, but not that much, but I didn't expect I would get a drop in performance on the other partitions at all. The other hardware in the server is: 2 x Quad Core Intel(R) Xeon(R) CPU E5405 @ 2.00GHz and 4gb RAM $ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 32 Lun: 00 Vendor: DP Model: BACKPLANE Rev: 1.05 Type: Enclosure ANSI SCSI revision: 05 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC 6/i Rev: 1.11 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: CD-ROM GCR-8240N Rev: 1.10 Type: CD-ROM ANSI SCSI revision: 05 I'm guessing this means the server has a PERC 6/i RAID controller? The encryption was done with default settings during debian 6 installation. I can't recall the exact specifics and am not sure how I go about finding them? Thanks

  Read the article

• System checks for disk drive error every time it boots

  - by Starx

  When my disk space for the ubuntu installation partition was getting low, from a live cd, I used gparted to increase its volume capacity, but deleting another partition and merging it to the ubuntu partition. Since then onwards, I am receiving disk checking for errors at boot screen for my partitions, always. What seem to be causing this and how to fix it? Update Here is my boot.log if it provides few insight fsck from util-linux 2.19.1 fsck from util-linux 2.19.1 /dev/sda1 was not cleanly unmounted, check forced. ubuntu: clean, 501325/1310720 files, 2958455/5242880 blocks /dev/sda1: 241/51272 files (3.3% non-contiguous), 73541/102400 blocks mountall: fsck /boot [358] terminated with status 1 Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox ... /dev/sda1 is a separate grub partition for my dual OS's

  Read the article

• error while trying to resize the partition

  - by speedox

  im running out of space and i tried to resize the partition using g-parted but i got an error: Checking for bad sectors ... Bad cluster: 0x2904636 - 0x2904636 (1) Bad cluster: 0x290526d - 0x290526e (2) Bad cluster: 0x29052fd - 0x2905300 (4) Bad cluster: 0x2905392 - 0x2905392 (1) Bad cluster: 0x2905425 - 0x2905428 (4) Bad cluster: 0x290555d - 0x2905560 (4) Bad cluster: 0x29055f1 - 0x29055f8 (8) Bad cluster: 0x2905681 - 0x2905688 (8) Bad cluster: 0x29057ac - 0x29057ac (1) Bad cluster: 0x29887dd - 0x29887dd (1) Bad cluster: 0x299a086 - 0x299a086 (1) Bad cluster: 0x348ec05 - 0x348ec05 (1) Bad cluster: 0x353dabb - 0x353dabb (1) Bad cluster: 0x353dba4 - 0x353dba4 (1) Bad cluster: 0x354a162 - 0x354a162 (1) Bad cluster: 0x354a1ce - 0x354a1ce (1) ERROR: This software has detected that the disk has at least 40 bad sectors. **************************************************************************** * WARNING: The disk has bad sector. This means physical damage on the disk * * surface caused by deterioration, manufacturing faults or other reason. * * The reliability of the disk may stay stable or degrade fast. We suggest * * making a full backup urgently by running 'ntfsclone --rescue ...' then * * run 'chkdsk /f /r' on Windows and rebooot it TWICE! Then you can resize * * NTFS safely by additionally using the --bad-sectors option of ntfsresize.* **************************************************************************** I opened the "disk utility" and clicked on "Smart DATA" button I got this image:

  Read the article

• SMART Status Data Interpretation - Disk Utility

  - by Mah

  Last week my external harddisk (Seagate Barracuda 1.5TB in a custom enclosure) showed signs of failure (Disk Utility SMART Pre-failure status - several bad sectors) and I decided to change it. I bought a new HDD (Seagate Barracuda 2TB) and connected it to my Ubuntu box with a SATA to USB cable that could not report SMART status. I copied all the contents of the old HDD to the new HDD (one partition with rsync, the other with parted cp) and then gently replaced the old HDD with the new one inside my aluminum enclosure. For obscure reasons after reconnecting the new HDD through the old enclosure, the Linux box could not detect my partitions. I recovered the partitions with testdisk and restarted the computer. After the restart I checked the SMART status of the new HDD an I get this: Read Error Rate --------------- Normalized 108 Worst 99 Threshold 6 Value 16737944 I got a high value on the Seek Error Rate as well. Wondering why this happens I copied 2 GB directory from one partition to the other and rechecked the SMART status (5 minutes later). This time I got the following: Read Error Rate --------------- Normalized 109 Worst 99 Threshold 6 Value 24792504 As you see there has been an increase in the error rate. I am unable to interpret these numbers. Is my new hard disk already dying? What are the acceptable values in these fields for Seagate hard disks? Then why the assessment is still good? While I could get temperature and airflow temperature data from my old HDD, I can not fetch them for the new one. I noticed that my old hdd had got really hot sometimes. Is it possible that the enclosure is killing the harddisks due to high temperature?... Thanks

  Read the article

• Updating to linux-image-3.2.0-26-generic occupies all disk space

  - by user42228

  I just ran a normal update through the update manager that wanted to update me to linux-image-3.2.0-26-generic. The installation paused halfway with a message that the root was full. I checked the disk usage, and noticed that one of the newly installed files: /lib/modules/3.2.0-26-generic/modules.ccwmap took up 63GB(!). Compared to the previous version: /lib/modules/3.2.0-24-generic/modules.ccwmap that took up only 4KB it seems like something went awfully wrong! As mentioned the update was paused when i ran out of disk space. There is no option in the update dialog to cancel or perform rollback on the update. Is it asking for trouble to kill the update manager? Any ideas as to what went wrong, and what I can do to remedy it? It's only minimal how much space I can free on that partition (without deleting the above mentioned file). If it is any help, the update was paused after this: Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-26-generic /boot/vmlinuz-3.2.0-26-generic

  Read the article

• Macbook won't read disk

  - by Gracie

  I have a macbook that I erased the original iOS on to restart with Ubuntu but when I put in my home burned disk it doesn't read it correctly and makes loud clicking noises. I burned it on a TDK CD-R80 700 MB CD from Windows 7 and even did the confirm to make sure it burned correctly. It has never read CDs like that before, so it's weird. Should I just make another CD? Or is there something wrong with the Macbook.

  Read the article

• SOS, i erased a disk,1T.by mistake

  - by gabriel

  i tried to make bootable a flash drive from the startup disk creator, and i wanted to copy an iso of the 11.10 ubuntu, and when i tried to erase the flash drive i pressed erase on another removable drive 1T storage by mistake, VVVery very very quickly less than one second and with no warning everything was erased i suppose.Is that thing possible?When i tried before theis to erase the flash drive it took around a minute to erase the 8GB.But now less than a second for 1T? Please help, Gabriel

  Read the article

• Downloading error "Could not retrieve the required disk image "

  - by Freed Ahmad

  When I try to download Ubuntu 12.04 using the Windows installer (Wubi) through a proxy server which requires proxy authentication, after I choose the Ubuntu installation size, username and password, when I click the Install button, I get this error: An error occurred: Could not retrieve the required disk image files For more information, please see the log file: c:\users\(myusername)\appdata\local\temp\wubi-12.04-rev266.log The log file says: proxy authentication error How can I solve this problem?

  Read the article

• How to use qcow2 disk image in Linux?

  - by sauparna

  I have a large qcow2 formatted disk image, which I use as storage. Often I need to move data to and from this disk image. I mount the disk using the qemu-nbd tool as follows: modprobe nbd max_part=63 qemu-nbd -c /dev/nbd0 /host/disk100G.img mount /dev/nbd0p1 /home/rup/disk But disk access fails every now and then in the midst of some I/O operation with an "Input/output error". At that point I have to manually unmount the disk and re-mount it so that I can run the program again: qemu-nbd -d /dev/nbd0 umount joborkhaki/ What could be the reason for this? Is there a better tool that I can use to maintain a qcow2 disk image?

  Read the article

• Can I have both Windows dynamic disk partition and some other non-Windows partition on the same disk?

  - by haimg

  When a basic Windows disk is converted to dynamic, Windows creates a partition that span the whole disk with the type of "Windows LVM" and manages its dynamic partitions within this space. So even if there is still free space on this disk, it is not visible to any other OS besides Windows. This happens with MBR and GPT disks both. I would like to share a Windows dynamic disk with some other OS. I have to have dynamic disks because I use Windows SoftRaid (mirrors). So, my questions are: Is there any way to "force" Windows to take up less then the whole disk when it converts a basic disk to dynamic? Will Windows tolerate having some other non-Windows partition on its dynamic disk?

  Read the article

• moving dynamic disk from Windows to another Windows computer when original Windows is not available

  - by Andrei

  How do I mount dynamic disk on new system without access to the old OS ? I need to move Dynamic data disk from old Windows XP (Pro, SP3) system, where disk crashed, to new Windows system without having access to the old OS. On new system, Dynamic disk shows as "Dynamic - Foreign". Microfoft has instructions for moving Dynamic Disk [1]. But Microsoft assumes having access to the old system. But I do not have acess to the old system. I am struck with "Dynamic - Foreign" static of the disk on new system. Thanks WinXP Pro SP3 [1] http://technet.microsoft.com/en-us/library/cc779854(WS.10).aspx Move Disk to another computer.

  Read the article

• What's the difference between disk backup and disk copy?

  - by superuser

  I'm confused and don't know which one to download: http://www.easeus.com/disk-copy/

  Read the article

• Transfer disk image to larger/smaller disk

  - by forthrin

  I need to switch the hard drive on a 2006 iMac to a new SSD. I don't have the original installation CDs. I know I can order CDs from Apple, but this costs money. Someone told me it's possible to rip the image of the old drive and transfer to the new drive. If so, does the size of the new drive have to be exactly the same as the old? If not, my questions are: Is it possible to "stretch" the image from 120 MB disk to a 256 MB disk (numbers are examples)? If so, what is the command line for this? Likewise, is it possible to "shrink" an image from a larger disk (eg. 256 MB) to a smaller disk (eg. 120 MB), provided that the actual space used on the disk does not exceed 120 MB? How do you do this on the command line?

  Read the article

• I want to reformat my external hard disk but disk utility said it could not be unmounted

  - by Faith

  Hi I wanted to reformat my HP 500GB hard disk to MS DOS (FAT) by using Disk Utility but Disk Utility kept saying that the hard disk cannot be unmounted. I tried googling it but nothing seems to answer my question. I'm not trying to reformat the hard disk in my Mac but my external hard disk! I usually format my hard disks to clear the documents I no longer need. And I'll change it to ExFat but currently, whenever I plug in my hard disk on Windows, the whole system just hangs there. Can someone help??

  Read the article

• Thunderbird 16.0.1 filling disk space

  - by Kris

  I'm on Ubuntu 12.04 with Thunderbird 16.0.1 and Kernel 3.6.0-030600rc4-generic. I used Thunderbird for quite a while and never had any problems with it. But now it seems to fill up my disk space very fast: watch -n 1 df -h . so Ubuntu started giving out warnings. First I removed some files but not much later it had filled up around 600 MB. It eats around 50 MB/min while I just download 10 emails or so via IMAP. This behaviour is new and seems to be some kind of bug. I don't want to delete my old mails, so what else could I do?

  Read the article

• Investigate disk writes further to find out which process writes to my SSD

  - by zuba

  I try to minimize disk writes to my new SSD system drive. I'm stuck with iostat output: ~ > iostat -d 10 /dev/sdb Linux 2.6.32-44-generic (Pluto) 13.11.2012 _i686_ (2 CPU) Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 8,60 212,67 119,45 21010156 11800488 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 3,00 0,00 40,00 0 400 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 1,70 0,00 18,40 0 184 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 1,20 0,00 28,80 0 288 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 2,20 0,00 32,80 0 328 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 1,20 0,00 23,20 0 232 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 3,40 19,20 42,40 192 424 As I see there are writes to sdb. How can I resolve which process writes? I know about iotop, but it doesn't show which filesystem is being accessed.

  Read the article

• external disk dont work on ubuntu

  - by Skirki

  i have problem with in my ubuntu: when i connect external imation apollo disc i dont see a file system. Disk is working because in windows OS on this same computer it works as well. when i typed dmesg i got following logs [12913.260078] usb 4-1: new low speed USB device using ohci_hcd and address 15 [12913.440072] usb 4-1: device descriptor read/64, error -62 [12913.730058] usb 4-1: device descriptor read/64, error -62 [12914.020085] usb 4-1: new low speed USB device using ohci_hcd and address 16 [12914.200082] usb 4-1: device descriptor read/64, error -62 [12914.490150] usb 4-1: device descriptor read/64, error -62 [12914.780064] usb 4-1: new low speed USB device using ohci_hcd and address 17 [12915.200070] usb 4-1: device not accepting address 17, error -62 [12915.380081] usb 4-1: new low speed USB device using ohci_hcd and address 18 [12915.800065] usb 4-1: device not accepting address 18, error -62 [12915.800100] hub 4-0:1.0: unable to enumerate USB device on port 1 i trying to fix that by use commands: cd /sys/bus/pci/drivers/ehci_hcd echo -n "0000:00:02.1" unbind but it did not match the result and i don't have any other idea

  Read the article

• SSD becomes hot, disk failure warning

  - by Aegluin

  I have a two weeks old SSD (Kingston SSDnow 64GB). Yesterday, the computer shutdown twice and after rebooting I was bombarded with disk failure warnings. I usually take such warnings serious (and backed up), but skeptical. After cooling down, the laptop boots again and the only red Smart value was the temperature (Ubuntu did not show the temperature of failure, but the at that time 29°). After refreshing the Smart status and doing a "self test", everything is green. Before contacting Kingston support, I would like to know whether it could be due to a software issue: Is it possible that it is false alarm, and how can I check? I installed Ubuntu 12.04 32bit and took care of alignment. I supposed Ubuntu set up with optimal settings for SSDs, how can I check that there was no mistake? The current temperature is around 40-56°. Is such a temperature abnormal for SSDs? Output of sudo smartctl --all /dev/sda: http://pastebin.ubuntu.com/1175940/

  Read the article

• ddrescue a non-solaris disk gets I/O error

  - by rleir

  I am trying to get a disk image of a SCSI disk using ddrescue on Solaris10 (Sparc). The disk is non-solaris, and ddrescue gets an immediate I/O error (as does dd). I used format to label the disk as Solaris, and now ddrescue reads it fine. Is there any way to get the image without labelling the disk as Solaris?

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >