iestyn ap mwg - Page 3 - Developer IT

Securely persist session between https://secure.yourname.com and http://www.yourname.com on rails ap

- by Matt

My rails site posts to a secure host (e.g. 'https://secure.yourname.com') when the user logs into the site. Session data is stored in the database, with the cookie containing only the session ID. The problem is that when the user returns to a non-https page, such as the home page (e.g. 'http://www.yourname.com') the user appears to have logged out. I believe the reason for this is that a separate cookie is stored for each host (www vs. secure). Is this correct? What is the best secure way to persist the session between both the http and https sections of the site? Does anyone know of any plugins that address this problem? The site runs on Heroku.

Read the article

Make password case unsensitive in shared ASP.Net membership tables web ap

- by bill

Hi all, i have two webapps.. that share ASP.Net membership tables. Everything works fine except i cannot remove case-sensitivity in one of the apps the way i am doing it in the other. in the non-working app void Login1_LoggingIn(object sender, LoginCancelEventArgs e) { string username = Login1.UserName.Trim(); if (!string.IsNullOrEmpty(username)) { MembershipUser user = Membership.GetUser(username); if (user != null) { // Only adjust the UserName if the password is correct. This is more secure // so a hacker can't find valid usernames if we adjust the case of mis-cased // usernames with incorrect passwords. string password = Login1.Password.ToUpper(); if (Membership.ValidateUser(user.UserName, password)) { Login1.UserName = user.UserName; } } } } is not working. the password is stored as all upper case. Converted at the time the membership user is created! So if the password is PASSWORD, typing PASSWORD allows me to authenticate. but typing password does not! Even though i can see the string being sent is PASSWORD (converted with toUpper()). I am at a complete loss on this.. in the other app i can type in lower or upper or mixed and i am able to authenticate. In the other app i am not using the textboxes from the login control though.. not sure if this is making the difference??

Read the article

Rebooting access point via SSH with pexpect... hangs. Any ideas?

- by MiniQuark

When I want to reboot my D-Link DWL-3200-AP access point from my bash shell, I connect to the AP using ssh and I just type reboot in the CLI interface. After about 30 seconds, the AP is rebooted: # ssh [email protected] [email protected]'s password: ******** Welcome to Wireless SSH Console!! ['help' or '?' to see commands] Wireless Driver Rev 4.0.0.167 D-Link Access Point wlan1 -> reboot Sound's great? Well unfortunately the ssh client process never exits, for some reason (maybe the AP kills the ssh server a bit too fast, I don't know). My ssh client process is completely blocked (even if I wait for several minutes, nothing happens). I always have to wait for the AP to reboot, then open another shell, find the ssh client process ID (using ps aux | grep ssh) then kill the ssh process using kill <pid>. That's quite annoying. So I decided to write a python script to reboot the AP. The script connects to the AP's CLI interface via ssh, using python-pexpect, and it tries to launch the "reboot" command. Here's what the script looks like: #!/usr/bin/python # usage: python reboot_ap.py {host} {user} {password} import pexpect import sys import time command = "ssh %(user)s@%(host)s"%{"user":sys.argv[2], "host":sys.argv[1]} session = pexpect.spawn(command, timeout=30) # start ssh process response = session.expect(r"password:") # wait for password prompt session.sendline(sys.argv[3]) # send password session.expect(" -> ") # wait for D-Link CLI prompt session.sendline("reboot") # send the reboot command time.sleep(60) # make sure the reboot has time to actually take place session.close(force=True) # kill the ssh process The script connects properly to the AP (I tried running some other commands than reboot, they work fine), it sends the reboot command, waits for one minute, then kills the ssh process. The problem is: this time, the AP never reboots! I have no idea why. Any solution, anyone?

Read the article

ddwrt client brigde acces point lost

- by llazzaro

Ok I have an AP with ddwrt firm (i know its not the best, but continue reading!) AP is configured to work like a wifi "transparent" brigde, also it had a virtual wifi network card to expand radius of wifi signal in that same AP. The brigde is working, computers behind AP gets ips from main routers which shares internet....BUT! I cant access webgui of the bridge AP... Main problem : AP is lost, but its working as brigde. I cant find it in the network (it didnt have any ip!) so I cant change any configuration... First solution : Reset AP, but it cannot be done. Reset button dont works due to a bug in ddwrt micro firm that mi linksys WAP54g had installed (I really hate this firmware I like more openwrt that my main router has) Second Solution : arp -a from main router , from computers behind AP...It dont appears in the list. Any more ideas, the router at some level must be there, the brigde is working. I know its possible that the AP is with an ip like 192.168.100.2 , my subnect actually is 172.16.X.X. :) thanks!

Read the article

sql sum data from multiple tables

- by Iulian

I have 2 tables AP and INV where both have the columns [PROJECT] and [Value]. I want a query to return something like this : PROJECT | SUM_AP | SUM_INV I came up with the code below but it's returning the wrong results ( sum is wrong ). SELECT SUM(AP.Value) AS SUM_AP, SUM(INV.Value) AS SUM_INV FROM AP INNER JOIN INV ON (AP.[PROJECT] =INV.[PROJECT]) WHERE AP.[PROJECT] = 'XXXXX' GROUP BY AP.[PROJECT]

Read the article

Outdoor WiFi Mesh Topology vs. Repeaters

- by IronJaxor

Here's the current configuration in our organization (which I believe is incorrect): We have a number of Cisco 1500 series AP's (22 in total), that are mounted outdoors to provide seamless WiFi coverage over a large area. Each AP however has its own physical ethernet connection back to the WLC (All the AP's are marked as Root AP's). They are all broadcasting the same SSID. We have tried to stagger the channel selection but because there are only three non-overlapping channels to choose from, and in some areas the density of AP's is quite high, there is multiple places of channel interference. With this configuration we experience 100-150 disconnects from clients every day. (Our clients are mobile so they move throughout the coverage area constantly). My idea is to switch the AP's to the same channel thereby forming a wireless mesh, use the built in functionality of the 1500 series to use 802.11a as the backhaul, designate one or two AP's as root AP's and wire them back to the WLC. Thereby forming a WiFi mesh, which if I'm not mistaken is the point of the 1500 series in the first place! I am however completely new at WiFi networks and wondering if I am simply mistaken in what I believe my proposed changes will enable, or if there is a better way to tackle the WiFi topology.

Read the article

fail2ban custom action to permanent ban IPs from China

- by John Magnolia

When a IP address gets banned how can I check if the banned IP address is from China. If yes, then add it to the permanent ban list. I have found this nice guide which write the banned IP to file. Reason: I am getting a lot of brute force attacks from China daily, thankfully fail2ban is helping restrict this although they appear to be getting worse and they are just changing their IP Address. Or even better would be if there was a maintained database of known hacker IP addresses. Example 1 Hi, The IP 60.169.78.77 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 60.169.78.77: % [whois.apnic.net node-7] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 60.166.0.0 - 60.175.255.255 netname: CHINANET-AH descr: CHINANET anhui province network descr: China Telecom descr: A12,Xin-Jie-Kou-Wai Street descr: Beijing 100088 country: CN admin-c: CH93-AP tech-c: JW89-AP mnt-by: APNIC-HM mnt-routes: MAINT-CHINANET-AH mnt-lower: MAINT-CHINANET-AH status: ALLOCATED PORTABLE changed: [email protected] 20040721 source: APNIC person: Chinanet Hostmaster nic-hdl: CH93-AP e-mail: [email protected] address: No.31 ,jingrong street,beijing address: 100032 phone: +86-10-58501724 fax-no: +86-10-58501724 country: CN changed: [email protected] 20070416 mnt-by: MAINT-CHINANET source: APNIC person: Jinneng Wang address: 17/F, Postal Building No.120 Changjiang address: Middle Road, Hefei, Anhui, China country: CN phone: +86-551-2659073 fax-no: +86-551-2659287 e-mail: [email protected] nic-hdl: JW89-AP mnt-by: MAINT-NEW changed: [email protected] 19990818 source: APNIC Regards, Fail2Ban Example 2 Hi, The IP 60.169.78.81 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 60.169.78.81: % [whois.apnic.net node-6] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 60.166.0.0 - 60.175.255.255 netname: CHINANET-AH descr: CHINANET anhui province network descr: China Telecom descr: A12,Xin-Jie-Kou-Wai Street descr: Beijing 100088 country: CN admin-c: CH93-AP tech-c: JW89-AP mnt-by: APNIC-HM mnt-routes: MAINT-CHINANET-AH mnt-lower: MAINT-CHINANET-AH status: ALLOCATED PORTABLE changed: [email protected] 20040721 source: APNIC person: Chinanet Hostmaster nic-hdl: CH93-AP e-mail: [email protected] address: No.31 ,jingrong street,beijing address: 100032 phone: +86-10-58501724 fax-no: +86-10-58501724 country: CN changed: [email protected] 20070416 mnt-by: MAINT-CHINANET source: APNIC person: Jinneng Wang address: 17/F, Postal Building No.120 Changjiang address: Middle Road, Hefei, Anhui, China country: CN phone: +86-551-2659073 fax-no: +86-551-2659287 e-mail: [email protected] nic-hdl: JW89-AP mnt-by: MAINT-NEW changed: [email protected] 19990818 source: APNIC Regards, Fail2Ban Example 3 Hi, The IP 222.133.244.99 has just been banned by Fail2Ban after 4 attempts against vsftpd. Here are more information about 222.133.244.99: % [whois.apnic.net node-6] % Whois data copyright terms http://www.apnic.net/db/dbcopyright.html inetnum: 222.133.244.96 - 222.133.244.127 netname: LCZFFHQ country: CN descr: liaochenggovermentfanghuoqiang admin-c: DS95-AP tech-c: DS95-AP status: ASSIGNED NON-PORTABLE changed: [email protected] 20060122 mnt-by: MAINT-CNCGROUP-SD source: APNIC route: 222.132.0.0/14 descr: CNC Group CHINA169 Shandong Province Network country: CN origin: AS4837 mnt-by: MAINT-CNCGROUP-RR changed: [email protected] 20060118 source: APNIC person: Data Communication Bureau Shandong nic-hdl: DS95-AP e-mail: [email protected] address: No.77 Jingsan Road,Jinan,Shandong,P.R.China phone: +86-531-6052611 fax-no: +86-531-6052414 country: CN changed: [email protected] 20050330 mnt-by: MAINT-CNCGROUP-SD source: APNIC Regards, Fail2Ban

Read the article

Can't find a wireless access point's IP address after changing router IP/LAN settings

- by flagg19

I have a modem/router, Netgear DG834, and a wireless access point (AP), Netgear WG602. The AP is directly connected to the router. My old working configuration was: Router IP address : 192.168.0.1 Access point IP address: 192.168.0.10 My new configuration is: Router IP address : 192.168.1.1 Access point IP address: ???.???.???.??? I changed my router's IP address/LAN settings to set up a VPN with another Netgear router that had the same LAN configuration. The wireless network is still up and perfectly working, but I can't find the AP's IP address. I've tried broadcast ping but the AP won't respond. I looked at the router "attached devices", but it's not there. I've played around with Nmap and arp request but the AP is totally invisible. I can fix it by resetting it to factory settings, but I'm very interested in learning more about this problem. I'm also interested in network security and this fact of having an invisible AP well, it's something I'd like to understand.

Read the article

Natal ne servira pas qu'à jouer, le système de reconnaissance de mouvements de Microsoft aura des ap

Mise à jour du 26/04/10 Le projet Natal ne servira pas qu'à jouer Le système de reconnaissance de mouvements de Microsoft pourrait avoir des applications plus "intrusives", voire publicitaires Le projet Natal ne servira pas qu'à jouer. C'est ce que vient de laisser entendre Marc Whitten, general manager de la Xbox 360. La technologie de reconnaissance de mouvements développée par Microsoft pourraient également avoir des applications plus... intrusives. « Imaginez un événement sportif. Natal pourrait savoir pour quelle équipe vous êtes, parce qu'il voit votre maillot ou qu'il repèrera quand [...] vous...

Read the article

Ethernet 802.1x client -> WiFi AP on a Raspberry Pi?

- by Martin Janiczek

I have an Ethernet connection that requires 802.1x authentication (TTLS, MSCHAPv2, name+password). My goal is to connect that to something that would then act as an WiFi AP, so I can use the connection on more devices (iPhone, notebook, etc.) Would it be possible/good idea to use Raspberry Pi for this purpose? Or are there better-suited devices to do this? EDIT: found some alternatives but because of low rep can't post more than two links... OpenWRT + wpa_supplicant guide Carambola - works with OpenWRT (but probably not standalone?) Hornet-UB - works with OpenWRT Asus RT-N10+ + OpenWRT how-to EDIT 2: probably going to try TP-LINK TL-WR740N. It's a classic router, but can be flashed with OpenWRT, and the price beats everything else I've seen.

Read the article

Ethernet 802.1x client -> WiFi AP on a Raspberry Pi?

- by Martin Janiczek

I have an Ethernet connection that requires 802.1x authentication (TTLS, MSCHAPv2, name+password). My goal is to connect that to something that would then act as an WiFi AP, so I can use the connection on more devices (iPhone, notebook, etc.) Would it be possible/good idea to use Raspberry Pi for this purpose? Or are there better-suited devices to do this? EDIT: found some alternatives but because of low rep can't post more than two links... OpenWRT + wpa_supplicant guide Carambola - works with OpenWRT (but probably not standalone?) Hornet-UB - works with OpenWRT Asus RT-N10+ + OpenWRT how-to

Read the article

Determining Maximum Txpower a WiFi Card Supports?

- by BigGenius

I have a Atheros R9285 wifi card. How can i determine , what is max. Txpower it can support? biggenius@hackbook:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"Default" Mode:Managed Frequency:2.437 GHz Access Point: 00:08:5C:9D:4F:40 Bit Rate=2 Mb/s Tx-Power=35 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=24/70 Signal level=-86 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:140 Invalid misc:247 Missed beacon:0 eth0 no wireless extensions. biggenius@hackbook:~$ iw phy0 info Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 2412 MHz [1] (35.0 dBm) * 2417 MHz [2] (35.0 dBm) * 2422 MHz [3] (35.0 dBm) * 2427 MHz [4] (35.0 dBm) * 2432 MHz [5] (35.0 dBm) * 2437 MHz [6] (35.0 dBm) * 2442 MHz [7] (35.0 dBm) * 2447 MHz [8] (35.0 dBm) * 2452 MHz [9] (35.0 dBm) * 2457 MHz [10] (35.0 dBm) * 2462 MHz [11] (35.0 dBm) * 2467 MHz [12] (35.0 dBm) * 2472 MHz [13] (35.0 dBm) * 2484 MHz [14] (35.0 dBm) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Band 2: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 5180 MHz [36] (35.0 dBm) * 5200 MHz [40] (35.0 dBm) * 5220 MHz [44] (35.0 dBm) * 5240 MHz [48] (35.0 dBm) * 5260 MHz [52] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5280 MHz [56] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5300 MHz [60] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5320 MHz [64] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5500 MHz [100] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5520 MHz [104] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5540 MHz [108] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5560 MHz [112] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5580 MHz [116] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5600 MHz [120] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5620 MHz [124] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5640 MHz [128] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5660 MHz [132] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5680 MHz [136] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5700 MHz [140] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5745 MHz [149] (35.0 dBm) * 5765 MHz [153] (35.0 dBm) * 5785 MHz [157] (35.0 dBm) * 5805 MHz [161] (35.0 dBm) * 5825 MHz [165] (35.0 dBm) Bitrates (non-HT): * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x1 RX 0x3 Configured Antennas: TX 0x1 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ managed, WDS, P2P-client } <= 2048, #{ AP, mesh point, P2P-GO } <= 8, total <= 2048, #channels <= 1 Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * Unknown command (82) * Unknown command (81) * Unknown command (84) * Unknown command (87) * Unknown command (85) * testmode * connect * disconnect Supported TX frame types: * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 Supported RX frame types: * IBSS: 0x00d0 * managed: 0x0040 0x00d0 * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * mesh point: 0x00b0 0x00c0 0x00d0 * P2P-client: 0x0040 0x00d0 * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 Device supports RSN-IBSS.

Read the article

How does one find out which application is associated with an indicator icon?

- by Amos Annoy

It is trivial to do this in Ubuntu 10.04. The question is specific to Ubuntu 12.04. some pertinent references (src: answer to What is the difference between indicators and a system tray?: Here is the documentation for indicators: Application indicators | Ubuntu App Developer libindicate Reference Manual libappindicator Reference Manual also DesktopExperienceTeam/ApplicationIndicators - Ubuntu Wiki ref: How can the application that makes an indicator icon be identified? bookmark: How does one find out which application is associated with an indicator icon in Ubuntu 12.04? is a serious question for reasons & problems outlined below and for which a significant investment has been made and is necessary for remedial purposes. reviewing refs. to find an orchestrated resolution ... (an indicator ap. indicator maybe needed) This has nothing to do (does it?) with right click. How can an indicator's icon in Ubuntu 12.04 be matched with the program responsible for it's manifestation on the top panel? A list of running applications can include all processes using System Monitor. How is the correct matching process found for an indicator? How are the sub-indicator applications identified? These are the aps associated with the components of an indicators drop-down menu. (This was to be a separate question and quite naturally follows up the progression. It is included here as it is obvious there is no provisioning to track down offending either sub or indicator aps. easily.) (The examination of SM points out a rather poignant factor in the faster battery depletion and shortened run time - the ambient quiescent CPU rate in 12.04 is now well over 20% when previously, in 10.04, it was well under 10%, between 5% and 7%! - the huge inordinate cpu overhead originates from Xorg and compiz - after booting the system, only SM is run and All Processes are selected, sorting on %CPU - switching between Resources and Processes profiles the execution overhead problem - running another ap like gedit "Text Editor" briefly gives it CPU priority - going back to S&M several aps. are at the top of the list in order: gnome-system-monitor as expected, then: Xorg, compiz, unity-panel-service, hud-service, with dbus-daemon and kworker/x:y's mixed in with some expected daemons and background tasks like nm-applet - not only do Xorg and compiz require excessive CPU time but their entourage has to come along too! further exacerbating the problem - our compute bound tasks no longer work effectively in the field - reduced battery life, reduced CPU time for custom ap.s etc. - and all this precipitated from an examination of what is going on with the battery ap. indicator - this was and is not a flippant, rhetorical or idle musing but has consequences for the credible deployment of 12.04 to reduce the negative impact of its overhead in a production environment) (I have a problem with the battery indicator - it sometimes has % and other times hh:mm - it is necessary to know the ap. & v. to get more info on controlling same. ditto: There are issues with other indicator aps.: NM vs. iwlist/iwconfig conflict, BT ap. vs RF switch, Battery ap. w/ no suspend/sleep for poor battery runtime, ... the list goes on) Details from: How can I find Application Indicator ID's? suggests looking at: file:///usr/share/indicator-application/ordering-override.keyfile [Ordering Index Overrides] nm-applet=1 gnome-power-manager=2 ibus=3 gst-keyboard-xkb=4 gsd-keyboard-xkb=5 which solves the battery ap. identification, and presumably nm is NetworkManager for the rf icon, but the envelope, blue tooth and speaker indicator aps. are still a mystery. (Also, the ordering is not correlated.) Mind you, it was simple in the past to simply right click to get the About option to find the ap. & v. info. browsing around and about: file:///usr/share/indicator-application/ordering-override.keyfile examined: file:///usr/share/indicators file:///usr/share/indicators/messages/applications/ ... perhaps?/presumably? the information sought may be buried in file:///usr/share/indicators A reference in the comments was given to: What is the difference between indicators and a system tray? quoting from that source ... Unfortunately desktop indicators are not well documented yet: I couldn't find any specification doc ... Well ... the actual document https://wiki.ubuntu.com/DesktopExperienceTeam/ApplicationIndicators#Summary does not help much but it's existential information provides considerable insight ...

Read the article

Getting ellipses function parameters without an initial argument

- by Tox1k

So I've been making a custom parser for a scripting language, and I wanted to be able to pass only ellipses arguments. I don't need or want an initial variable, however Microsoft and C seem to want something else. FYI, see bottom for info. I've looked at the va_* definitions #define _crt_va_start(ap,v) ( ap = (va_list)_ADDRESSOF(v) + _INTSIZEOF(v) ) #define _crt_va_arg(ap,t) ( *(t *)((ap += _INTSIZEOF(t)) - _INTSIZEOF(t)) ) #define _crt_va_end(ap) ( ap = (va_list)0 ) and the part I don't want is the v in va_start. As a little background I'm competent in goasm and I know how the stack works so I know what's happening here. I was wondering if there is a way to get the function stack base without having to use inline assembly. Ideas I've had: #define im_va_start(ap) (__asm { mov [ap], ebp }) and etc... but really I feel like that's messy and I'm doing it wrong. struct function_table { const char* fname; (void)(*fptr)(...); unsigned char maxArgs; }; function_table mytable[] = { { "MessageBox", &tMessageBoxA, 4 } }; ... some function that sorts through a const char* passed to it to find the matching function in mytable and calls tMessageBoxA with the params. Also, the maxArgs argument is just so I can check that a valid number of parameters is being sent. I have personal reasons for not wanting to send it in the function, but in the meantime we can just say it's because I'm curious. This is just an example; custom libraries are what I would be implementing so it wouldn't just be calling WinAPI stuff. void tMessageBoxA(...) { // stuff to load args passed MessageBoxA(arg1, arg2, arg3, arg4); } I'm using the __cdecl calling convention and I've looked up ways to reliably get a pointer to the base of the stack (not the top) but I can't seem to find any. Also, I'm not worried about function security or typechecking.

Read the article

Linux/hostapd: AP can ping clients, clients can access internet, can't access www@wlan1 with more than 5-6 packets at once

- by mhambra

Please edit the title, can't make it sound better. -- OP. Hi all, I have a Wifi USB dongle in a PC, that serves as an AP for laptop. wlan1: 192.168.2.1, netmask 255.255.255.0, routed: route add -net 192.168.2.0 netmask 255.255.255.0 gw 192.168.2.1 ping 192.168.2.2 (laptop): ping was ok for lot of packets. Now, I try to access 192.168.2.1:80/myindex.html (apache) from laptop, and can see that own 1kb test page. But, trying to access 192.168.2.1:80/my.jpg, I see the following: GET /my.jpg HTTP/1.1 200 OK <jpg header, about a kilobyte> <TCP packet retransmisson> <TCP packet retransmisson> <end of stream> It seems to be a hostapd's problem (networked stuff worked fine with Ad-Hoc), but it may be also forwarding/routing problem too. What to google for? Even more strange, SSH to that host works fine.

Read the article

Repeated disconnects on WPA PEAP network

- by exasperated

My school has a WPA PEAP network with GTC inner authentication. I am able to connect to the network, but once I load a website or two, the network become unresponsive (i.e. in Chromium, it gets stuck at "Sending request"), and I'm eventually disconnected. Any help will be greatly appreciated. Here's some log output. I can provide more if needed: Ubuntu 13.04 3.8.0-32-generic x86_64 lsusb: 03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) lsmod: iwldvm 241872 0 mac80211 606457 1 iwldvm iwlwifi 173516 1 iwldvm cfg80211 511019 3 iwlwifi,mac80211,iwldvm dmesg: [ 3.501227] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X [ 3.503541] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 [ 3.527153] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 3.527162] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 3.527170] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 3.527178] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [ 3.527186] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled [ 3.527192] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0 [ 3.527240] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 3.551049] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 375.153065] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 375.159727] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 375.553201] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 375.559871] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 1892.110738] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 1892.117357] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5227.235372] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 5227.242122] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5817.817954] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 5817.824560] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5824.571917] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 5824.571929] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 5824.571935] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 6956.290061] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 6956.296671] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 6963.080560] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 6963.080566] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 6963.080570] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 7613.469241] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 7613.475870] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 7620.201265] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 7620.201278] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 7620.201285] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 8232.762453] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 8232.769065] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 8239.581772] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 8239.581784] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 8239.581792] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [13763.634808] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [13763.641427] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [16955.598953] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [16955.605574] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 lshw: *-network description: Wireless interface product: Centrino Advanced-N 6235 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 24 serial: b4:b6:76:a0:4b:3c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-32-generic firmware=18.168.6.1 ip=10.250.169.96 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn resources: irq:46 memory:f7c00000-f7c01fff iwlist scan: Cell 02 - Address: 24:DE:C6:B0:C7:D9 Channel:36 Frequency:5.18 GHz (Channel 36) Quality=29/70 Signal level=-81 dBm Encryption key:on ESSID:"CatChat2x" Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=0000004ff3fe419b Extra: Last beacon: 27820ms ago IE: Unknown: 0009436174436861743278 IE: Unknown: 01088C129824B048606C IE: Unknown: 030124 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : 802.1x IE: Unknown: 2D1ACC011BFFFF000000000000000000000000000000000000000000 IE: Unknown: 3D1624001B000000FF000000000000000000000000000000 IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 IE: Unknown: DD1E00904C33CC011BFFFF000000000000000000000000000000000000000000 IE: Unknown: DD1A00904C3424001B000000FF000000000000000000000000000000 Cell 04 - Address: 24:DE:C6:B0:C3:E9 Channel:149 Frequency:5.745 GHz Quality=28/70 Signal level=-82 dBm Encryption key:on ESSID:"CatChat2x" Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000181f60e19c Extra: Last beacon: 28680ms ago IE: Unknown: 0009436174436861743278 IE: Unknown: 01088C129824B048606C IE: Unknown: 030195 IE: Unknown: 050400010000 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : 802.1x IE: Unknown: 2D1ACC011BFFFF000000000000000000000000000000000000000000 IE: Unknown: 3D1695001B000000FF000000000000000000000000000000 IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 IE: Unknown: DD1E00904C33CC011BFFFF000000000000000000000000000000000000000000 IE: Unknown: DD1A00904C3495001B000000FF000000000000000000000000000000 IE: Unknown: DD07000B8601040817 IE: Unknown: DD0E000B860103006170313930333032 Cell 09 - Address: 24:DE:C6:B0:C0:29 Channel:149 Frequency:5.745 GHz Quality=39/70 Signal level=-71 dBm Encryption key:on ESSID:"CatChat2x" Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=00000112fb688ede Extra: Last beacon: 27716ms ago ifconfig (while connected): wlan0 Link encap:Ethernet HWaddr b4:b6:76:a0:4b:3c inet addr:10.250.16.220 Bcast:10.250.31.255 Mask:255.255.240.0 inet6 addr: fe80::b6b6:76ff:fea0:4b3c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:230023 errors:0 dropped:0 overruns:0 frame:0 TX packets:130970 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:255999759 (255.9 MB) TX bytes:16652605 (16.6 MB) iwconfig (while connected): wlan0 IEEE 802.11abgn ESSID:"CatChat2x" Mode:Managed Frequency:5.745 GHz Access Point: 24:DE:C6:B0:C0:29 Bit Rate=6 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=36/70 Signal level=-74 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:3 Missed beacon:0

Read the article

Oracle VM Forum????????!?????????????? "??????·????" ??????

- by rika.tokumichi

??????OTN????????? 2010?5?18?????????????????Oracle VM Forum?????????? ?????????????????????????????????? ?????????????????????????????????·?????????????????????????????????????????????????????????????????????????·???????????????????????????????????????????? ??????????4?????????? ????????(?????)???????????·???????~???????????????? 5????~ ?????!????????·????????????????????? ????????????·?????????~???????????????????????~ ????????????????????~????????·????????????????~ ????????????????? ????????????????????????????????OTN?????????????????????????????????????????????????????????Fusion Middleware?????? - Fusion Middleware???????? ????????????????????????????????^^ ???????????????????????????????????? ------------------------------ ?????!????????·????????????????????? ????????????????????????????Xen???????????????? ???Oracle VM for x86?Xen???????????????Xen 4.0????????Oracle VM???????????????????????????????????????Dell PowerEdge R910(CPU 32?????? 64GB)????????? ??????????????????VM????????????????????????????????????????????·???????????????????? ??????????4GB??????·????????????????????·????????????????? ???????VM1???????????????????????VM 30????VM 60?????????????????????? ?????????????????????????????????????VM?????????????????????? ?????????????Self-Ballooning?Transcendent Memory?????????????????????????????????????????????????????????? >Xen??????????????? ????????????????????????Dell PowerEdge R810?????????????????????2U??????????????CPU 32??????????·????32??????????? ----------------------------- ????????????????????~????????·????????????????~ ???????????????????(AP)???????????????????????????????????????????????????????????????????????????????????????????????? ????????????AP????????????????????????? ?????????????????????????????????AP????·????????????????????????????????????????AP·????·????????????????????????????????????? ???????????EC???????????????????????????????????? ????????????????????2?????? ???Oracle Virtual Assembly Builder? ????(Web?AP?DB)????????????????????????????????????????????? ???Oracle WebLogic Server on JRockit Virtual Edition? ????OS?????????????????JVM?????OS????????????????????(?????????????)?????????????????????????? ----------------------------- ??????????????????? >?????????????? ?????????????(??????)?????????????????????????? ?????????????????????????! ?????????????????????????????????????????????????????????

Read the article

How do you reset a Nexxt 54M Wireless AP Router?

- by Fernando

I have this Nexxt router, and I haven't been able to reset it correctly. I pressed the thin button in the back (which you have to press with a pen point or something similar, really slim), but haven't managed to make it work. The CPU, WLAN and power lights go on and remain still. The lights for the connected cables don't turn on...

Read the article

Security tips for adding wireless AP to domain network?

- by Cy

I am researching best-practices for adding wireless to our existing domain network. My DHCP server is running Windows Server 03 Standard (not sure if thats useful). I am familiar with simple home networking but I thought I'd get some expert advice for the more advanced stuff. Any tips and / or best-practices? Is this Cisco Wireless Access Point a good option? Are there any additional hardware recommendations? Thank you in advance for your help.

Read the article

Connecting to Aerohive AP's from Laptops running Win. 7 using authentication from a Windows 2008 domain server

- by user264116

I have deployed a wireless network using Aerohive access points. 2 of them are set up as radius servers. I want my users to be able to use the same user name and password they use when they log onto our domain. They are able to do this from android devices or computers running Windows 8. It will not work on Windows 7 machines. How do I remedy this situation, keeping in mind that the machines are personal machines not company owned and I will have no way to change their hardware or software.

Read the article

Is there a way to backup AP and DNS in Windows 2008 without backing up the whole Volume?

- by EtherDragon

I would like to know if there is a (cost free) way to backup Windows Server 2008 Active Directory and DNS settings without using Windows Server Backup. The problem stems from not having a seperate volume available to store the resulting backup from Windows Server Backup. I examined the command line options with wbadmin and it also expects the destination to be a dedicated volume for the backup. ~ED

Read the article

How i can apply database changes and application changes to my live ap.net mvc3 web application

- by john G

i have published my asp.net mvc3 that uses entity framewrok with database-first approach to the live server using IIS 7. then i modify the database any update some views, models and controllers in the vesion at my development environment also i have fixed some defects. So which tools I should use to update my live version to be similar to the version at the development environment, while not loosing any of the data already stored in the database, and is there any tutorials that can help me in implementing similar tasks. BR

Read the article

Inheritance - Could not initialize proxy - no Session.

- by Ninu

hello....i'm newbie developer.... i really need help at now... i just get started with Nhibernate thing at .Net... when i learn Inheritance and try it...it makes me confusing...why i get error like this : Initializing[AP.Core.Domain.AccountPayable.APInvoice#API03/04/2010/001]-Could not initialize proxy - no Session. this is my xml : <class xmlns="urn:nhibernate-mapping-2.2" mutable="true" name="AP.Core.Domain.AccountPayable.APAdjustment, AP.Core, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" table="APAdjustment"> <id name="AdjustmentNumber" type="System.String, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <column name="AdjustmentNumber" length="17" /> <generator class="assigned" /> </id> <property name="Amount" type="System.Decimal, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <column name="Amount" /> </property> <property name="TransactionDate" type="System.DateTime, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"> <column name="TransactionDate" /> </property> <many-to-one class="AP.Core.Domain.AccountPayable.APInvoice, AP.Core, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" lazy="proxy" name="PurchaseInvoice"> <column name="PurchaseInvoice_id" not-null="true" /> </many-to-one> <joined-subclass name="AP.Core.Domain.AccountPayable.APCreditAdjustment, AP.Core, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null" lazy="true" table="APCreditAdjustment"> <key> <column name="APAdjustment_id" /> </key> </joined-subclass> </class> </hibernate-mapping> and this is inheritance Class : Parent Class -- public class APAdjustment { #region :FIELD private string adjustmentNumber; private decimal amount; private DateTime transactionDate; private APInvoice purchaseInvoice; Child Class -- public class APCreditAdjustment : APAdjustment { public APCreditAdjustment(){ and this my Data access : public IList<APAdjustment> GetByNameAll() { ICriteria criteria = Nhibernatesession.CreateCriteria(typeof(APAdjustment)); return criteria.List<APAdjustment>() ; } My Problem is : when i load data with gridview ...it works...but i change the property to autogenerate="true" ...i missing "PurchaseInvoice" field...and i change to bind manually,and it works..when i edit that gridview ...i get this error... Initializing[AP.Core.Domain.AccountPayable.APInvoice#API03/04/2010/001]-Could not initialize proxy - no Session so then i change my xml ...lazy="no-proxy" ...it still work...but when edit again ...i get error again ..and i do "Comment out the selected lines" to my association "Many-to-one"...i really works it..but that's not i want... CAN ANYBODY HELP ME...??Plizz...:( Note : I almost forget it ,i use fluent hibernate to generate to database.From fluent Hibernate ..i put *.xml file ...so i'm work to xml NHibernate...not fluent hibernate thing...:)

Read the article

hostapd running on Ubuntu Server 13.04 only allows single station to connect when using wpa

- by user450688

Problem Only a single station can connect to hostapd at a time. Any single station can connect (W8, OSX, iOS, Nexus) but when two or more hosts are connected at the same time the first client loses its connectivity. However there are no connectivity issues when WPA is not used. Setup Linux (Ubuntu server 13.04) wireless router (with separate networks for wired WAN, wired LAN, and Wireless LAN. iptables-save output: *nat :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -s 10.0.0.0/24 -o p4p1 -j MASQUERADE -A POSTROUTING -s 10.0.1.0/24 -o p4p1 -j MASQUERADE COMMIT *mangle :PREROUTING ACCEPT [13:916] :INPUT ACCEPT [9:708] :FORWARD ACCEPT [4:208] :OUTPUT ACCEPT [9:3492] :POSTROUTING ACCEPT [13:3700] COMMIT *filter :INPUT DROP [0:0] :FORWARD DROP [0:0] :OUTPUT ACCEPT [9:3492] -A INPUT -i p4p1 -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -i p4p1 -p tcp -m tcp --dport 22 -m state --state NEW -j ACCEPT -A INPUT -i eth0 -j ACCEPT -A INPUT -i wlan0 -j ACCEPT -A INPUT -i lo -j ACCEPT -A FORWARD -i p4p1 -m state --state RELATED,ESTABLISHED -j ACCEPT -A FORWARD -i eth0 -j ACCEPT -A FORWARD -i wlan0 -j ACCEPT -A FORWARD -i lo -j ACCEPT COMMIT /etc/hostapd/hostapd.conf #Wireless Interface interface=wlan0 driver=nl80211 ssid=<removed> hw_mode=g channel=6 max_num_sta=15 auth_algs=3 ieee80211n=1 wmm_enabled=1 wme_enabled=1 #Configure Hardware Capabilities of Interface ht_capab=[HT40+][SMPS-STATIC][GF][SHORT-GI-20][SHORT-GI-40][RX-STBC12] #Accept all MAC address macaddr_acl=0 #Shared Key Authentication wpa=1 wpa_passphrase=<removed> wpa_key_mgmt=WPA-PSK wpa_pairwise=CCMP rsn_pairwise=CCMP ###IPad Connectivevity Repair ieee8021x=0 eap_server=0 Wireless Card #lshw output product: RT2790 Wireless 802.11n 1T/2R PCIe vendor: Ralink corp. physical id: 0 bus info: pci@0000:03:00.0 logical name: mon.wlan0 version: 00 serial: <removed> width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list logical wireless ethernet physical configuration: broadcast=yes driver=rt2800pci driverversion=3.8.0-25-generic firmware=0.34 ip=10.0.1.254 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn #iw list output Band 1: Capabilities: 0x272 HT20/HT40 Static SM Power Save RX Greenfield RX HT20 SGI RX HT40 SGI RX STBC 2-streams Max AMSDU length: 3839 bytes No DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 2 usec (0x04) HT RX MCS rate indexes supported: 0-15, 32 TX unequal modulation not supported HT TX Max spatial streams: 1 HT TX MCS rate indexes supported may differ Frequencies: * 2412 MHz [1] (27.0 dBm) * 2417 MHz [2] (27.0 dBm) * 2422 MHz [3] (27.0 dBm) * 2427 MHz [4] (27.0 dBm) * 2432 MHz [5] (27.0 dBm) * 2437 MHz [6] (27.0 dBm) * 2442 MHz [7] (27.0 dBm) * 2447 MHz [8] (27.0 dBm) * 2452 MHz [9] (27.0 dBm) * 2457 MHz [10] (27.0 dBm) * 2462 MHz [11] (27.0 dBm) * 2467 MHz [12] (disabled) * 2472 MHz [13] (disabled) * 2484 MHz [14] (disabled) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) Available Antennas: TX 0 RX 0 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ AP } <= 8, total <= 8, #channels <= 1 Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * set_tx_bitrate_mask * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * Unknown command (84) * Unknown command (87) * Unknown command (85) * Unknown command (89) * Unknown command (92) * testmode * connect * disconnect Supported TX frame types: * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 * Unknown mode (10): 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0 Supported RX frame types: * IBSS: 0x40 0xb0 0xc0 0xd0 * managed: 0x40 0xd0 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * mesh point: 0xb0 0xc0 0xd0 * P2P-client: 0x40 0xd0 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0 * Unknown mode (10): 0x40 0xd0 Device supports RSN-IBSS. HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Device supports TX status socket option. Device supports HT-IBSS.

Read the article

SQL query mixing aggregated results and single values

- by Paul Flowerdew

I have a table with transactions. Each transaction has a transaction ID, and accounting period (AP), and a posting value (PV), as well as other fields. Some of the IDs are duplicated, usually because the transaction was done in error. To give an example, part of the table might look like: ID PV AP 123 100 2 123 -100 5 In this case the transaction was added in AP2 then removed in AP5. Another example would be: ID PV AP 456 100 2 456 -100 5 456 100 8 In the first example, the problem is that if I am analyzing what was spent in AP2, there is a transaction in there which actually shouldn't be taken into account because it was taken out again in AP5. In the second example, the second two transactions shouldn't be taken into account because they cancel each other out. I want to label as many transactions as possible which shouldn't be taken into account as erroneous. To identify these transactions, I want to find the ones with duplicate IDs whose PVs sum to zero (like ID 123 above) or transactions where the PV of the earliest one is equal to sum(PV), as in the second example. This second condition is what is causing me grief. So far I have SELECT * FROM table WHERE table.ID IN (SELECT table.ID FROM table GROUP BY table.ID HAVING COUNT(*) > 1 AND (SUM(table.PV) = 0 OR SUM(table.PV) = <PV of first transaction in each group>)) ORDER BY table.ID; The bit in chevrons is what I'm trying to do and I'm stuck. Can I do it like this or is there some other method I can use in SQL to do this? Edit 1: Btw I forgot to say that I'm using SQL Compact 3.5, in case it matters. Edit 2: I think the code snippet above is a bit misleading. I still want to mark out transactions with duplicate IDs where sum(PV) = 0, as in the first example. But where the PV of the earliest transaction = sum(PV), as in the second example, what I actually want is to keep the earliest transaction and mark out all the others with the same ID. Sorry if that caused confusion. Edit 3: I've been playing with Clodoaldo's solution and have made some progress, but still can't get quite what I want. I'm trying to get the transactions I know for certain to be erroneous. Suppose the following transactions are also in the table: ID PV AP 789 100 2 789 200 5 789 -100 8 In this example sum(PV) < 0 and the earliest PV < sum(PV) so I don't want to mark any of these out. If I modify Clodoaldo's query as follows: select t.* from t left join ( select id, min(ap) as ap, sum(pv) as sum_pv from t group by id having sum(pv) <> 0 ) s on t.id = s.id and t.ap = s.ap and t.pv = s.sum_pv where s.id is null This gives the result ID PV AP 123 100 2 123 -100 5 456 -100 5 456 100 8 789 100 3 789 200 5 789 -100 8 Whilst the first 4 transactions are ok (they would be marked out), the 789 transactions are also there, and I don't want them. But I can't figure out how to modify the query so that they're not included. Any ideas?

Search Results

Search found 413 results on 17 pages for 'iestyn ap mwg'.

Page 3/17 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12 | Next Page >

- by Matt

- by bill

- by MiniQuark

- by llazzaro

- by Iulian

- by IronJaxor

- by John Magnolia

- by flagg19

- by Martin Janiczek

- by Martin Janiczek

- by BigGenius

- by Amos Annoy

- by Tox1k

- by mhambra

- by exasperated

- by rika.tokumichi

- by Fernando

- by Cy

- by user264116

- by EtherDragon

- by john G

- by Ninu

- by user450688

- by Paul Flowerdew

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12 | Next Page >