Search Results

Search found 223 results on 9 pages for 'laser'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 3/9 | < Previous Page | 1 2 3 4 5 6 7 8 9  | Next Page >

  • How do I get an HP 1018 laser printer to work on 12.04?

    - by MInner
    edit : already printed on windows-machine Ubuntu 12.04, LJ 1018. I've tried making foo2zjs from sourse. I've downloaded firmware and placed it where necessarily manually from here I've also tried this - same as manual dowload but with some patches like stoping cups, etc.. I've fixed usbfs: process 11200 (usb) did not claim interface 0 before use problems using sudo rmmod usblp as described here. And now I have Aug 10 11:51:59 pav /usr/sbin/hplj1018: foo2zjs: usb://HP/LaserJet%201018?serial=KP07RLV... download failed. Aug 10 11:51:59 pav /usr/sbin/hplj1018: foo2zjs: loading HP LaserJet 1018 firmware /lib/firmware/hp/sihp1018.dl to CUPS USB device ... error. Before that prinet was stucking on "Sending data to printer". Now it's code is "Not connected". Unless ben@pav:~$ lsusb ... Bus 001 Device 015: ID 03f0:4117 Hewlett-Packard LaserJet 1018 Thank you.

    Read the article

  • What's the best way to add some particle or laser effects to an already animated character?

    - by Scott
    I just purchased some rigged and animated robot characters from 3drt for a game I'm making in unity. I would like to be able to add some weapon effects to the characters. For example, I would like for the robots to be able to shot lasers out of the hands at enemies. I have know idea where to even start with this task as I'm more of a programmer than a graphics guy. Can some experienced developers / designers please point me in a good direction? Thanks. Note: As of right now I have maya and blender installed on my computer.

    Read the article

  • Buying an old laser printer -- what will need to be replaced?

    - by marienbad
    Hi all -- as you can see I'm new. I do IT and wiring for a small local shop but I never deal with printers. I do a LOT of printing, and I'd like to stop spending as much money on it. On my local CL, there is an HP 8100DN (duplex network) printer for a very good price (and the toner is a quarter-cent per page). It has printed 200,000 pages and I don't yet know anything else about it. The model was released in 1999. So my questions: What are the parts that tend to need service on laser printers? On ebay, I see fusers, rollers, DC power boards, and motors. What would you expect to replace soon at 200,000 pages? Are there any good "tests" to find out if certain parts are near failure? Do you have anything to say about the HP 8100 specifically? The bottom line for me is that if there's any chance of repairs costing more than $100, it's not worth it for me.

    Read the article

  • 50 Years of LEDs: An Interview with Inventor Nick Holonyak [Video]

    - by Jason Fitzpatrick
    The man who powered on the first LED half a century ago is still around to talk about it; read on to watch an interview with LED inventor Nick Holonyak. The most fascinating thing about Holonyak’s journey to the invention of the LED was that he started off trying to build a laser and ended up inventing a super efficient light source: Holonyak got his PhD in 1954. In 1957, after a year at Bell Labs and a two year stint in the Army, he joined GE’s research lab in Syracuse, New York. GE was already exploring semiconductor applications and building the forerunners of modern diodes called thyristors and rectifiers. At a GE lab in Schenectady, the scientist Robert Hall was trying to build the first diode laser. Hall, Holonyak and others noticed that semiconductors emit radiation, including visible light, when electricity flows through them. Holonyak and Hall were trying to “turn them on,” and channel, focus and multiply the light. Hall was the first to succeed. He built the world’s first semiconductor laser. Without it, there would be no CD and DVD players today. “Nobody knew how to turn the semiconductor into the laser,” Holonyak says. “We arrived at the answer before anyone else.” But Hall’s laser emitted only invisible, infrared light. Holonyak spent more time in his lab, testing, cutting and polishing his hand-made semiconducting alloys. In the fall of 1962, he got first light. “People thought that alloys were rough and turgid and lumpy,” he says. “We knew damn well what happened and that we had a very powerful way of converting electrical current directly into light. We had the ultimate lamp.” How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems 7 Ways To Free Up Hard Disk Space On Windows

    Read the article

  • Maze Navigation in Player Stage with Roomba

    - by Scott
    Here is my code: /* Scott Landau Robot Lab Assignment 1 */ // Standard Java Libs import java.io.*; // Player/Stage Libs import javaclient2.*; import javaclient2.structures.*; import javaclient2.structures.sonar.*; // Begin public class SpinningRobot { public static Position2DInterface pos = null; public static LaserInterface laser = null; public static void main(String[] args) { PlayerClient robot = new PlayerClient("localhost", 6665); laser = robot.requestInterfaceLaser(0, PlayerConstants.PLAYER_OPEN_MODE); pos = robot.requestInterfacePosition2D(0,PlayerConstants.PLAYER_OPEN_MODE); robot.runThreaded (-1, -1); pos.setSpeed(0.5f, -0.25f); // end pos float x, y; x = 46.0f; y = -46.0f; boolean done = false; while( !done ){ if(laser.isDataReady()) { float[] laser_data = laser.getData().getRanges(); System.out.println("== IR Sensor =="); System.out.println("Left Wall Distance: "+laser_data[360]); System.out.println("Right Wall Distance: " +laser_data[0]); // if laser doesn't reach left wall, move to detect it // so we can guide using left wall if ( laser_data[360] < 0.6f ) { while ( laser_data[360] < 0.6f ) { pos.setSpeed(0.5f, -0.5f); } } else if ( laser_data[0] < 0.6f ) { while(laser_data[0<0.6f) { pos.setSpeed(0.5f, 0.5f); } } pos.setSpeed(0.5f, -0.25f); // end pos? done = ( (pos.getX() == x) && (pos.getY() == y) ); } } } } // End I was trying to have the Roomba go continuously at a slight right curve, quickly turning away from each wall it came to close to if it recognized it with it's laser. I can only use laser_data[360] and laser_data[0] for this one robot. I think this would eventually navigate the maze. However, I am using the Player Stage platform, and Stage freezes when the Roomba comes close to a wall using this code, I have no idea why. Also, if you can think of a better maze navigation algorithm, please let me know. Thank you!

    Read the article

  • How to count term frequency for set of documents?

    - by ManBugra
    i have a Lucene-Index with following documents: doc1 := { caldari, jita, shield, planet } doc2 := { gallente, dodixie, armor, planet } doc3 := { amarr, laser, armor, planet } doc4 := { minmatar, rens, space } doc5 := { jove, space, secret, planet } so these 5 documents use 14 different terms: [ caldari, jita, shield, planet, gallente, dodixie, armor, amarr, laser, minmatar, rens, jove, space, secret ] the frequency of each term: [ 1, 1, 1, 4, 1, 1, 2, 1, 1, 1, 1, 1, 2, 1 ] for easy reading: [ caldari:1, jita:1, shield:1, planet:4, gallente:1, dodixie:1, armor:2, amarr:1, laser:1, minmatar:1, rens:1, jove:1, space:2, secret:1 ] What i do want to know now is, how to obtain the term frequency vector for a set of documents? for example: Set<Documents> docs := [ doc2, doc3 ] termFrequencies = magicFunction(docs); System.out.pring( termFrequencies ); would result in the ouput: [ caldari:0, jita:0, shield:0, planet:2, gallente:1, dodixie:1, armor:2, amarr:1, laser:1, minmatar:0, rens:0, jove:0, space:0, secret:0 ] remove all zeros: [ planet:2, gallente:1, dodixie:1, armor:2, amarr:1, laser:1 ] Notice, that the result vetor contains only the term frequencies of the set of documents. NOT the overall frequencies of the whole index! The term 'planet' is present 4 times in the whole index but the source set of documents only contains it 2 times. A naive implementation would be to just iterate over all documents in the docs set, create a map and count each term. But i need a solution that would also work with a document set size of 100.000 or 500.000. Is there a feature in Lucene i can use to obtain this term vector? If there is no such feature, how would a data structure look like someone can create at index time to obtain such a term vector easily and fast? I'm not that Lucene expert so i'am sorry if the solution is obvious or trivial.

    Read the article

  • Choosing The FS-1300D

    Kyocera Mita Printers are among the best in laser printers and for good reason as well. For a long time Kyocera has concentrated solely on laser printers and has not diverted its attention by going i... [Author: Steve White - Computers and Internet - May 16, 2010]

    Read the article

  • Can't slow down the pointer speed enough

    - by murat güler
    I have changed my mouse, bought a new set but still no use - it's too fast for a designer. And in the new version (12.04) I don't even know how to find the xorg.conf, or anything would help Is not there any application for this to adjust mouse sensivity more than the default options like Logitech applications for Windows? Keyboard and mouse model: Logitech mk520 wireless laser mouse & keyboard set. Mouse model: m310 (laser, wireless)

    Read the article

  • 6 Interesting Facts About NASA’s Mars Rover ‘Curiosity’

    - by Gopinath
    Humans quest for exploring the surrounding planets to see whether we can live there or not is taking new shape today. NASA’s Mars probing robot, Curiosity, blasted off today on its 9 months journey to reach Mars and explore it for the possibilities of life there. Scientist says that Curiosity is one most advanced rover ever launched to probe life on other planets. Here is the launch video and some analysis by a news reporter Lets look at the 6 interesting facts about the mission 1. It’s as big as a car Curiosity is the biggest ever rover ever launched by NASA to probe life on outer planets. It’s as big as a car and almost double the size of its predecessor rover Spirit. The length of Curiosity is around 9 feet 10 inches(3 meters), width is 9 feet 1 inch (2.8 meters) and height is 7 feet (2.1 meters). 2. Powered by Plutonium – Lasts 24×7 for 23 months The earlier missions of NASA to explore Mars are powered by Solar power and that hindered capabilities of the rovers to move around when the Sun is hiding. Due to dependency of Sun the earlier rovers were not able to traverse the places where there is no Sun light. Curiosity on the other hand is equipped with a radioisotope power system that generates electricity from the heat emitted by plutonium’s radioactive decay. The plutonium weighs around 10 pounds and can generate power required for operating the rover close to 23 weeks. The best part of the new power system is, Curiosity can roam around in darkness, light and all year around. 3. Rocket powered backpack for a science fiction style landing The Curiosity is so heavy that NASA could not use parachute and balloons to air-drop the rover on the surface of Mars like it’s previous missions. They are trying out a new science fiction style air-dropping mechanism that is similar to sky crane heavy-lift helicopter. The landing of the rover begins first with entry into the Mars atmosphere protected by a heat shield. At about 6 miles to the surface, the heat shield is jettisoned and a parachute is deployed to glide the rover smoothly. When the rover touches 3 miles above the surface, the parachute is jettisoned and the eight motors rocket backpack is used for a smooth and impact free landing as shown in the image. Here is an animation created by NASA on the landing sequence. If you are interested in getting more detailed information about the landing process check this landing sequence picture available on NASA website 4. Equipped with Star Wars style laser gun Hollywood movie directors and novelist always imagined aliens coming to earth with spaceships full of laser guns and blasting the objects which comes on their way. With Curiosity the equations are going to change. It has a powerful laser gun equipped in one of it’s arms to beam laser on rocks to vaporize them. This is not part of any assault mission Curiosity is expected to carry out, the laser gun is will be used to carry out experiments to detect life and understand nature. 5. Most sophisticated laboratory powered by 10 instruments Around 10 state of art instruments are part of Curiosity rover and the these 10 instruments form a most advanced rover based lab ever built by NASA. There are instruments to cut through rocks to examine them and other instruments will search for organic compounds. Mounted cameras can study targets from a distance, arm mounted instruments can study the targets they touch. Microscopic lens attached to the arm can see and magnify tiny objects as tiny as 12.5 micro meters. 6. Rover Carrying 1.24 million names etched on silicon Early June 2009 NASA launched a campaign called “Send Your Name to Mars” and around 1.24 million people registered their names through NASA’s website. All those 1.24 million names are etched on Silicon chips mounted onto Curiosity’s deck. If you had registered your name in the campaign may be your name is going to reach Mars soon. Curiosity On Web If you wish to follow the mission here are few links to help you NASA’s Curiosity Web Page Follow Curiosity on Facebook Follow @MarsCuriosity on Twitter Artistic Gallery Image of Mars Rover Curiosity A printable sheet of Curiosity Mission [pdf] Images credit: NASA This article titled,6 Interesting Facts About NASA’s Mars Rover ‘Curiosity’, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • Optimizing multiple dispatch notification algorithm in C#?

    - by Robert Fraser
    Sorry about the title, I couldn't think of a better way to describe the problem. Basically, I'm trying to implement a collision system in a game. I want to be able to register a "collision handler" that handles any collision of two objects (given in either order) that can be cast to particular types. So if Player : Ship : Entity and Laser : Particle : Entity, and handlers for (Ship, Particle) and (Laser, Entity) are registered than for a collision of (Laser, Player), both handlers should be notified, with the arguments in the correct order, and a collision of (Laser, Laser) should notify only the second handler. A code snippet says a thousand words, so here's what I'm doing right now (naieve method): public IObservable<Collision<T1, T2>> onCollisionsOf<T1, T2>() where T1 : Entity where T2 : Entity { Type t1 = typeof(T1); Type t2 = typeof(T2); Subject<Collision<T1, T2>> obs = new Subject<Collision<T1, T2>>(); _onCollisionInternal += delegate(Entity obj1, Entity obj2) { if (t1.IsAssignableFrom(obj1.GetType()) && t2.IsAssignableFrom(obj2.GetType())) obs.OnNext(new Collision<T1, T2>((T1) obj1, (T2) obj2)); else if (t1.IsAssignableFrom(obj2.GetType()) && t2.IsAssignableFrom(obj1.GetType())) obs.OnNext(new Collision<T1, T2>((T1) obj2, (T2) obj1)); }; return obs; } However, this method is quite slow (measurable; I lost ~2 FPS after implementing this), so I'm looking for a way to shave a couple cycles/allocation off this. I thought about (as in, spent an hour implementing then slammed my head against a wall for being such an idiot) a method that put the types in an order based on their hash code, then put them into a dictionary, with each entry being a linked list of handlers for pairs of that type with a boolean indication whether the handler wanted the order of arguments reversed. Unfortunately, this doesn't work for derived types, since if a derived type is passed in, it won't notify a subscriber for the base type. Can anyone think of a way better than checking every type pair (twice) to see if it matches? Thanks, Robert

    Read the article

  • Robotic Arm &ndash; Hardware

    - by Szymon Kobalczyk
    This is first in series of articles about project I've been building  in my spare time since last Summer. Actually it all began when I was researching a topic of modeling human motion kinematics in order to create gesture recognition library for Kinect. This ties heavily into motion theory of robotic manipulators so I also glanced at some designs of robotic arms. Somehow I stumbled upon this cool looking open source robotic arm: It was featured on Thingiverse and published by user jjshortcut (Jan-Jaap). Since for some time I got hooked on toying with microcontrollers, robots and other electronics, I decided to give it a try and build it myself. In this post I will describe the hardware build of the arm and in later posts I will be writing about the software to control it. Another reason to build the arm myself was the cost factor. Even small commercial robotic arms are quite expensive – products from Lynxmotion and Dagu look great but both cost around USD $300 (actually there is one cheap arm available but it looks more like a toy to me). In comparison this design is quite cheap. It uses seven hobby grade servos and even the cheapest ones should work fine. The structure is build from a set of laser cut parts connected with few metal spacers (15mm and 47mm) and lots of M3 screws. Other than that you’d only need a microcontroller board to drive the servos. So in total it comes a lot cheaper to build it yourself than buy an of the shelf robotic arm. Oh, and if you don’t like this one there are few more robotic arm projects at Thingiverse (including one by oomlout). Laser cut parts Some time ago I’ve build another robot using laser cut parts so I knew the process already. You can grab the design files in both DXF and EPS format from Thingiverse, and there are also 3D models of each part in STL. Actually the design is split into a second project for the mini servo gripper (there is also a standard servo version available but it won’t fit this arm).  I wanted to make some small adjustments, layout, and add measurements to the parts before sending it for cutting. I’ve looked at some free 2D CAD programs, and finally did all this work using QCad 3 Beta with worked great for me (I also tried LibreCAD but it didn’t work that well). All parts are cut from 4 mm thick material. Because I was worried that acrylic is too fragile and might break, I also ordered another set cut from plywood. In the end I build it from plywood because it was easier to glue (I was told acrylic requires a special glue). Btw. I found a great laser cutter service in Kraków and highly recommend it (www.ebbox.com.pl). It cost me only USD $26 for both sets ($16 acrylic + $10 plywood). Metal parts I bought all the M3 screws and nuts at local hardware store. Make sure to look for nylon lock (nyloc) nuts for the gripper because otherwise it unscrews and comes apart quickly. I couldn’t find local store with metal spacers and had to order them online (you’d need 11 x 47mm and 3 x 15mm). I think I paid less than USD $10 for all metal parts. Servos This arm uses five standards size servos to drive the arm itself, and two micro servos are used on the gripper. Author of the project used Modelcraft RS-2 Servo and Modelcraft ES-05 HT Servo. I had two Futaba S3001 servos laying around, and ordered additional TowerPro SG-5010 standard size servos and TowerPro SG90 micro servos. However it turned out that the SG90 won’t fit in the gripper so I had to replace it with a slightly smaller E-Sky EK2-0508 micro servo. Later it also turned out that Futaba servos make some strange noise while working so I swapped one with TowerPro SG-5010 which has higher torque (8kg / cm). I’ve also bought three servo extension cables. All servos cost me USD $45. Assembly The build process is not difficult but you need to think carefully about order of assembling it. You can do the base and upper arm first. Because two servos in the base are close together you need to put first with one piece of lower arm already connected before you put the second servo. Then you connect the upper arm and finally put the second piece of lower arm to hold it together. Gripper and base require some gluing so think it through too. Make sure to look closely at all the photos on Thingiverse (also other people copies) and read additional posts on jjshortcust’s blog: My mini servo grippers and completed robotic arm  Multiply the robotic arm and electronics Here is also Rob’s copy cut from aluminum My assembled arm looks like this – I think it turned out really nice: Servo controller board The last piece of hardware I needed was an electronic board that would take command from PC and drive all seven servos. I could probably use Arduino for this task, and in fact there are several Arduino servo shields available (for example from Adafruit or Renbotics).  However one problem is that most support only up to six servos, and second that their accuracy is limited by Arduino’s timer frequency. So instead I looked for dedicated servo controller and found a series of Maestro boards from Pololu. I picked the Pololu Mini Maestro 12-Channel USB Servo Controller. It has many nice features including native USB connection, high resolution pulses (0.25µs) with no jitter, built-in speed and acceleration control, and even scripting capability. Another cool feature is that besides servo control, each channel can be configured as either general input or output. So far I’m using seven channels so I still have five available to connect some sensors (for example distance sensor mounted on gripper might be useful). And last but important factor was that they have SDK in .NET – what more I could wish for! The board itself is very small – half of the size of Tic-Tac box. I picked one for about USD $35 in this store. Perhaps another good alternative would be the Phidgets Advanced Servo 8-Motor – but it is significantly more expensive at USD $87.30. The Maestro Controller Driver and Software package includes Maestro Control Center program with lets you immediately configure the board. For each servo I first figured out their move range and set the min/max limits. I played with setting the speed an acceleration values as well. Big issue for me was that there are two servos that control position of lower arm (shoulder joint), and both have to be moved at the same time. This is where the scripting feature of Pololu board turned out very helpful. I wrote a script that synchronizes position of second servo with first one – so now I only need to move one servo and other will follow automatically. This turned out tricky because I couldn’t find simple offset mapping of the move range for each servo – I had to divide it into several sub-ranges and map each individually. The scripting language is bit assembler-like but gets the job done. And there is even a runtime debugging and stack view available. Altogether I’m very happy with the Pololu Mini Maestro Servo Controller, and with this final piece I completed the build and was able to move my arm from the Meastro Control program.   The total cost of my robotic arm was: $10 laser cut parts $10 metal parts $45 servos $35 servo controller ----------------------- $100 total So here you have all the information about the hardware. In next post I’ll start talking about the software that I wrote in Microsoft Robotics Developer Studio 4. Stay tuned!

    Read the article

  • I have problems printing from gedit in windows

    - by John C
    Gedit in linux works like a champ. For me, in two installations Gedit in Windows xp works well except that it will not print properly on HP laser jets or toshibas laser printers. It will make a 90 page project out of two pages of text composed in gedit. It puts one or two confused lines of text at the top of a sheet and then ejects the page. Any suggestions? jac

    Read the article

  • USB mouse shuts down the laptop!

    - by Ryan
    For the past two days, whenever I plug in my USB mouse (which has been working for a long time, previously) into the laptop, my computer restarts! I tried changing mice, but the same thing happens. I have 3 ports, usually, I try one port and the laser does not come on, then I try another one and the laser comes and and off, then I again take out and put it in any port and the damn thing just turns off the computer. Specs: Windows 7 Ultimate 64-bit, 4GB RAM, Fujitsu 532ah i5 laptop

    Read the article

  • 555 Footstool Turns Tech into Mad Scientist Decor

    - by Jason Fitzpatrick
    If you just can’t find the appropriate footstool for your laboratory, this laser-cut footstool styled to look like the ubiquitous 555 Timer should fit the bill. At Evil Mad Scientist Laboratories they were in search for the perfect footstool. Never ones to do something halfway they set out to build a footstool shaped like the famous integrated circuit design the 555 Timer. The project involved computer design, CNC routers, laser engraving, lots of plywood and glue, and paint. Hit up the link below to see pictures of the entire build process. 555 Footstool [Evil Mad Scientist Laboratories] How To Encrypt Your Cloud-Based Drive with BoxcryptorHTG Explains: Photography with Film-Based CamerasHow to Clean Your Dirty Smartphone (Without Breaking Something)

    Read the article

  • How do I get my Canon MF4410 printer to work in Ubuntu 12.04?

    - by Kevin
    I have a Canon i-sensys MF4410 laser printer. I am running a dual boot system with Windows 7 and Ubuntu 12.04. The printer works in Windows and Ubuntu sees it when I attempt to add a new printer but I cannot get it to work in Ubuntu. (It previously worked fine under Ubuntu 8.?) I have tried installing (and un-installing) the driver cque-en but, although Ubuntu sees the printer, it does not find the driver. I have even tried using the generic laser and 'text only' drivers but these do not work. If anyone can help and it requires using terminal please give detailed instructions. Thanks Kevin

    Read the article

  • Properly Label Your Dangerous Projects

    - by Jason Fitzpatrick
    In the pursuit of science, fun, and laser-fueled hijinks, we often undertake projects that really should be labeled more properly. Download this effective label to visually warn “No really, you’ll burn the house down”. Courtesy of Flattr at Thingiverse, you can grab a copy of the “Warning: Will Burn Your House Down” graphic in high resolution image formats suitable for silk screening, laser engraving, or plain old fashioned sign printing. Warning: Will Burn Your House Down [Thingiverse via Make] How To Encrypt Your Cloud-Based Drive with BoxcryptorHTG Explains: Photography with Film-Based CamerasHow to Clean Your Dirty Smartphone (Without Breaking Something)

    Read the article

  • Send raw data to USB parallel port after upgrading to 11.10

    - by zaphod
    I have a laser cutter connected via a generic USB to parallel adapter. The laser cutter speaks HPGL, as it happens, but since this is a laser cutter and not a plotter, I usually want to generate the HPGL myself, since I care about the ordering, speed, and direction of cuts and so on. In previous versions of Ubuntu, I was able to print to the cutter by copying an HPGL file directly to the corresponding USB "lp" device. For example: cp foo.plt /dev/usblp1 Well, I just upgraded to Ubuntu 11.10 oneiric, and I can't find any "lp" devices in /dev anymore. D'oh! What's the preferred way to send raw data to a parallel port in Ubuntu? I've tried System Settings Printing + Add, hoping that I might be able to associate my device with some kind of "raw printer" driver and print to it with a command like lp -d LaserCutter foo.plt But my USB to parallel adapter doesn't seem to show up in the list. What I do see are my HP Color LaserJet, two USB-to-serial adapters, "Enter URI", and "Network Printer". Meanwhile, over in /dev, I do see /dev/ttyUSB0 and /dev/ttyUSB1 devices for the 2 USB-to-serial adapters. I don't see anything obvious corresponding to the HP printer (which was /dev/usblp0 prior to the upgrade), except for generic USB stuff. For example, sudo find /dev | grep lp produces no output. I do seem to be able to print to the HP printer just fine, though. The printer setup GUI gives it a device URI starting with "hp:" which isn't much help for the parallel adapter. The CUPS administrator's guide makes it sound like I might need to feed it a device URI of the form parallel:/dev/SOMETHING, but of course if I had a /dev/SOMETHING I'd probably just go on writing to it directly. Here's what dmesg says after I disconnect and reconnect the device from the USB port: [ 924.722906] usb 1-1.1.4: USB disconnect, device number 7 [ 959.993002] usb 1-1.1.4: new full speed USB device number 8 using ehci_hcd And here's how it shows up in lsusb -v: Bus 001 Device 008: ID 1a86:7584 QinHeng Electronics CH340S Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1a86 QinHeng Electronics idProduct 0x7584 CH340S bcdDevice 2.52 iManufacturer 0 iProduct 2 USB2.0-Print iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Device Status: 0x0000 (Bus Powered)

    Read the article

  • Projectiles in tile mapped turn-based tactics game?

    - by Petteri Hietavirta
    I am planning to make a Laser Squad clone and I think I have most of the aspects covered. But the major headache is the projectiles shot/thrown. The easy way would be to figure out the probability of hit and just mark miss/hit. But I want to be able to have the projectile to hit something eventually (collateral damage!). Currently everything is flat 2D tile map and there would be full (wall, door) and half height (desk, chair, window) obstacles. My idea is to draw an imaginary line from the shooter to the target and add some horizontal&vertical error based on the player skills. Then I would trace the modified path until it hits something. This is basically what the original Laser Squad seems to do. Can you recommend any algorithms or other approaches for this?

    Read the article

  • Send raw data to USB parallel port after upgrading to 11.10 oneiric

    - by zaphod
    I have a laser cutter connected via a generic USB to parallel adapter. The laser cutter speaks HPGL, as it happens, but since this is a laser cutter and not a plotter, I usually want to generate the HPGL myself, since I care about the ordering, speed, and direction of cuts and so on. In previous versions of Ubuntu, I was able to print to the cutter by copying an HPGL file directly to the corresponding USB "lp" device. For example: cp foo.plt /dev/usblp1 Well, I just upgraded to Ubuntu 11.10 oneiric, and I can't find any "lp" devices in /dev anymore. D'oh! What's the preferred way to send raw data to a parallel port in Ubuntu? I've tried System Settings Printing + Add, hoping that I might be able to associate my device with some kind of "raw printer" driver and print to it with a command like lp -d LaserCutter foo.plt But my USB to parallel adapter doesn't seem to show up in the list. What I do see are my HP Color LaserJet, two USB-to-serial adapters, "Enter URI", and "Network Printer". Meanwhile, over in /dev, I do see /dev/ttyUSB0 and /dev/ttyUSB1 devices for the 2 USB-to-serial adapters. I don't see anything obvious corresponding to the HP printer (which was /dev/usblp0 prior to the upgrade), except for generic USB stuff. For example, sudo find /dev | grep lp produces no output. I do seem to be able to print to the HP printer just fine, though. The printer setup GUI gives it a device URI starting with "hp:" which isn't much help for the parallel adapter. The CUPS administrator's guide makes it sound like I might need to feed it a device URI of the form parallel:/dev/SOMETHING, but of course if I had a /dev/SOMETHING I'd probably just go on writing to it directly. Here's what dmesg says after I disconnect and reconnect the device from the USB port: [ 924.722906] usb 1-1.1.4: USB disconnect, device number 7 [ 959.993002] usb 1-1.1.4: new full speed USB device number 8 using ehci_hcd And here's how it shows up in lsusb -v: Bus 001 Device 008: ID 1a86:7584 QinHeng Electronics CH340S Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1a86 QinHeng Electronics idProduct 0x7584 CH340S bcdDevice 2.52 iManufacturer 0 iProduct 2 USB2.0-Print iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Device Status: 0x0000 (Bus Powered)

    Read the article

  • sharing a USB printer in SOHO environment [migrated]

    - by Registered User
    Here is a situation I am facing, there is USB printer which works only on a Windows XP machine, there are other devices in LAN it is a Small Office Home Office environment. How can this USB printer attached to Windows XP machine be shared so that other laptops or users in Network who have Windows 7 or Linux on their laptops can use this printer. The printer model number is Canon Laser Shot LBP-1210 http://www.canon-europe.com/For_Home/Product_Finder/Printers/Laser/LaserShot_LBP1210/index.asp a print server is not available to me I need to make it work in this situation only.What can I do? the clients are unable to connect to this.It is not a network or TCP/IP printer If a from Windows 7 machine some one wants to use this printer so that he can take a print he gets an error while adding the printer to his machine which is a Windows 7 machine (where as the printer is USB printer on Windows XP machine) Start--->Devices and Printers---> Add Printer---> Find Printer by name or IP address--->Selected a shared printer by name-->\\PC-Name-printer3 and select browse it gives a message Windows can not find a driver for Canon LASER SHOT LBP-1210 on the network what does this mean do I need to install some kind of software at client machine or on the machine where printer is present?

    Read the article

  • Color Profiles in Windows 7 vs. XP

    - by flxkid
    I have a Brother Color Laser Printer and an HP 8150DN. I have a local Windows 7 Pro machine that I do graphics work on. I created a letterhead that when printed from my machine looks dark and rich on either the mono HP or the color Brother laser. I take this same letterhead, and move it onto our network for use by our users which are all on XP. Then they print the same file, it is washed out on either printer. I've confirmed that the printer settings we're using are identical. I've confirmed that its not related to the program or even specifically to the letterhead. I can duplicate this with other files too. I'm down to XP vs Windows 7 being the issue. I'm fairly certain now that color profiles are involved. I have no clue how to fix it though. Any suggestions would be much appreciated.

    Read the article

  • Color Profiles in Windows 7 vs. XP

    - by flxkid
    I have a Brother Color Laser Printer and an HP 8150DN. I have a local Windows 7 Pro machine that I do graphics work on. I created a letterhead that when printed from my machine looks dark and rich on either the mono HP or the color Brother laser. I take this same letterhead, and move it onto our network for use by our users which are all on XP. Then they print the same file, it is washed out on either printer. I've confirmed that the printer settings we're using are identical. I've confirmed that its not related to the program or even specifically to the letterhead. I can duplicate this with other files too. I'm down to XP vs Windows 7 being the issue. I'm fairly certain now that color profiles are involved. I have no clue how to fix it though. Any suggestions would be much appreciated.

    Read the article

  • When I try to install Windows 7 on dell inspiron 1420 which came with Ubuntu freezes at the beginnin

    - by draganstankovic
    I have searched many forums and tried a lot of suggested solutions but nothing works. I am sure that installation disk is ok cause it worked before (I was able to install Windows7 on my other notebook - MSI). What happens is: I boot with installation CD, it says 'Windows is loading files...' Then it says Starting Windows (mouse laser works at that moment). Then I get the screen with window which has a title "Install Windows" with options to choose language, keyboard, etc. and asking me to click next. But, the problem is that at that moment mouse and keyboard don't work at all. Mouse's laser is turned off, and if I press CAPS LOCK on keyboard it doesn't turn the LED on. Do you have any suggestions? Thanks!

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 1 2 3 4 5 6 7 8 9  | Next Page >