Search Results

Search found 55 results on 3 pages for 'mcp'.

Page 3/3 | < Previous Page | 1 2 3 

  • SATA drive problems with two SIL RAID cards

    - by Jon Topper
    I've just put a second SiI 3114 SATARaid card in my home server so that I could add another pair of SATA drives and increase my storage space. Annoyingly, it doesn't seem to work: [ 32.816030] ata5: lost interrupt (Status 0x0) [ 32.816072] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 32.816091] ata5.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 32.816094] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 32.816101] ata5.00: status: { DRDY } [ 32.816117] ata5: hard resetting link [ 33.136082] ata5: SATA link down (SStatus 0 SControl 0) [ 36.060940] irq 18: nobody cared (try booting with the "irqpoll" option) [ 36.060949] Pid: 0, comm: swapper Not tainted 2.6.31-20-generic #58-Ubuntu [ 36.060954] Call Trace: [ 36.060977] [] ? printk+0x18/0x1c [ 36.060997] [] __report_bad_irq+0x27/0x90 [ 36.061005] [] note_interrupt+0x150/0x190 [ 36.061011] [] handle_fasteoi_irq+0xac/0xd0 [ 36.061023] [] handle_irq+0x18/0x30 [ 36.061029] [] do_IRQ+0x47/0xc0 [ 36.061042] [] ? irq_exit+0x50/0x70 [ 36.061058] [] ? smp_apic_timer_interrupt+0x57/0x90 [ 36.061065] [] common_interrupt+0x30/0x40 [ 36.061075] [] ? native_safe_halt+0x5/0x10 [ 36.061082] [] default_idle+0x46/0xd0 [ 36.061088] [] cpu_idle+0x8c/0xd0 [ 36.061103] [] rest_init+0x55/0x60 [ 36.061111] [] start_kernel+0x2e6/0x2ec [ 36.061117] [] ? unknown_bootoption+0x0/0x19e [ 36.061133] [] i386_start_kernel+0x7c/0x83 [ 36.061137] handlers: [ 36.061139] [] (sil_interrupt+0x0/0xb0) [ 36.061151] Disabling IRQ #18 [ 38.136014] ata5: hard resetting link [ 38.456022] ata5: SATA link down (SStatus 0 SControl 0) [ 43.456013] ata5: hard resetting link [ 43.776022] ata5: SATA link down (SStatus 0 SControl 0) [ 43.776035] ata5.00: disabled [ 43.776055] ata5.00: device reported invalid CHS sector 0 [ 43.776074] sd 4:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 43.776082] sd 4:0:0:0: [sde] Sense Key : Aborted Command [current] [descriptor] [ 43.776092] Descriptor sense data with sense descriptors (in hex): [ 43.776097] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 [ 43.776112] 00 00 00 00 [ 43.776118] sd 4:0:0:0: [sde] Add. Sense: No additional sense information [ 43.776127] end_request: I/O error, dev sde, sector 0 [ 43.776136] Buffer I/O error on device sde, logical block 0 [ 43.776170] ata5: EH complete [ 43.776187] ata5.00: detaching (SCSI 4:0:0:0) root@core:~# cat /proc/interrupts CPU0 0: 47 IO-APIC-edge timer 1: 8 IO-APIC-edge i8042 6: 3 IO-APIC-edge floppy 7: 0 IO-APIC-edge parport0 8: 0 IO-APIC-edge rtc0 9: 0 IO-APIC-fasteoi acpi 14: 53069 IO-APIC-edge pata_sis 15: 53004 IO-APIC-edge pata_sis 17: 112265 IO-APIC-fasteoi sata_sil 18: 200002 IO-APIC-fasteoi sata_sil, SiS SI7012 19: 111140 IO-APIC-fasteoi eth0 20: 0 IO-APIC-fasteoi ohci_hcd:usb2 21: 0 IO-APIC-fasteoi ohci_hcd:usb3 23: 0 IO-APIC-fasteoi ehci_hcd:usb1 NMI: 0 Non-maskable interrupts LOC: 6650492 Local timer interrupts SPU: 0 Spurious interrupts CNT: 0 Performance counter interrupts PND: 0 Performance pending work RES: 0 Rescheduling interrupts CAL: 0 Function call interrupts TLB: 0 TLB shootdowns TRM: 0 Thermal event interrupts THR: 0 Threshold APIC interrupts MCE: 0 Machine check exceptions MCP: 160 Machine check polls ERR: 0 MIS: 0 root@core:~# lspci | grep Raid 00:09.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) 00:0a.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) root@core:~# lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 9.10 Release: 9.10 Codename: karmic root@core:~# uname -a Linux core.topper.me.uk 2.6.31-20-generic #58-Ubuntu SMP Fri Mar 12 05:23:09 UTC 2010 i686 GNU/Linux I've tried a combination of different kernel options (irqpoll, noapic, noacpi, pci=noapic) all to no avail. Does anyone have any bright ideas about how I can go about making this work? Swapping PCI cards around isn't an option as there are only two slots in this motherboard (an ASRock K7S41GX). The BIOS doesn't look to have too much in the way of configuration options regarding IRQ usage. Plan B is to ditch this server completely and buy a new QNAP for these drives to go in, but I was hoping to avoid doing this right now.

    Read the article

  • CodePlex Daily Summary for Wednesday, May 23, 2012

    CodePlex Daily Summary for Wednesday, May 23, 2012Popular ReleasesChristoc's DotNetNuke Module Development Template: 00.00.08 for DNN6: BEFORE USE YOU need to install the MSBuild Community Tasks available from http://msbuildtasks.tigris.org For best results you should configure your development environment as described in this blog post Then read this latest blog post about customizing and using these custom templates. Installation is simple To use this template place the ZIP (not extracted) file in your My Documents\Visual Studio 2010\Templates\ProjectTemplates\Visual C#\Web OR for VB My Documents\Visual Studio 2010\Te...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.53: fix issue #18106, where member operators on numeric literals caused the member part to be duplicated when not minifying numeric literals ADD NEW FEATURE: ability to create source map files! The first mapfile format to be supported is the Script# format. Use the new -map filename switch to create map files when building your sources.Microsoft SQL Server Product Samples: Database: AdventureWorks 2008 Analysis Services Project: AdventureWorks 2008 Analysis Services sample database project files. Project files for Analysis Services 2008 sample cubes (standard and enterprise). Lessons 1 to 10 tutorial files.HigLabo: HigLabo_20120522: Bug fix of EncodeToMailHeaderLine method when TransferEncoding is QuotedPrintable and Encoding is not ASCII.BlackJumboDog: Ver5.6.3: 2012.05.22 Ver5.6.3  (1) HTTP????????、ftp://??????????????????????LogicCircuit: LogicCircuit 2.12.5.22: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionThis release is fixing start up issue.Internals Viewer (updated) for SQL Server 2008 R2.: Internals Viewer for SSMS 2008 R2: Updated code to work with SSMS 2008 R2. Changed dependancies, removing old assemblies no longer present and replacing them with updated versions.Orchard Project: Orchard 1.4.2: This is a service release to address 1.4 and 1.4.1 bugs. Please read our release notes for Orchard 1.4.2: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-NotesVirtu: Virtu 0.9.2: Source Requirements.NET Framework 4 Visual Studio 2010 with SP1 or Visual Studio 2010 Express with SP1 Silverlight 5 Tools for Visual Studio 2010 with SP1 Windows Phone 7 Developer Tools (which includes XNA Game Studio 4) Binaries RequirementsSilverlight 5 .NET Framework 4 XNA Framework 4SharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.0): New fetures:View other users predictions Hide/Show background image (web part property) Installing SharePoint Euro 2012 PredictorSharePoint Euro 2012 Predictor has been developed as a SharePoint Sandbox solution to support SharePoint Online (Office 365) Download the solution havivi.euro2012.wsp from the download page: Downloads Upload this solution to your Site Collection via the solutions area. Click on Activate to make the web parts in the solution available for use in the Site C...Metadata Document Generator for Microsoft Dynamics CRM 2011: Metadata Document Generator (2.0.0.0): New UI Metro style New features Save and load settings to/from file Export only OptionSet attributes Use of Gembox Spreadsheet to generate Excel (makes application lighter : 1,5MB instead of 7MB)Audio Pitch & Shift: Audio Pitch And Shift 4.2.0: Backward / Forward buttons Improved features for encoding, streaming, menu Bug fixesSilverlight socket component: Smark.NetDisk: Smark.NetDisk?????Silverlight ?.net???????????,???????????????????????。Smark.NetDisk??????????,????.net???????????????????????tcp??;???????Silverlight??????????????????????callisto: callisto 2.0.28: Update log: - Extended Scribble protocol. - Updated HTML5 client code - now supports the latest versions of Google Chrome.ExtAspNet: ExtAspNet v3.1.6: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ??????????。 ExtAspNet ??????? JavaScript,?? CSS,?? UpdatePanel,?? ViewState,?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????:Apache License 2.0 (Apache) ??:http://bbs.extasp.net/ ??:http://demo.extasp.net/ ??:http://doc.extasp.net/ ??:http://extaspnet.codeplex.com/ ??:http://sanshi.cnblogs.com/ ????: +2012-05-20 v3.1.6 -??RowD...Dynamics XRM Tools: Dynamics XRM Tools BETA 1.0: The Dynamics XRM Tools 1.0 BETA is now available Seperate downloads are available for On Premise and Online as certain features are only available On Premise. This is a BETA build and may not resemble the final release. Many enhancements are in development and will be made available soon. Please provide feedback so that we may learn and discover how to make these tools better.PHPExcel: PHPExcel 1.7.7: See Change Log for details of the new features and bugfixes included in this release. BREAKING CHANGE! From PHPExcel 1.7.8 onwards, the 3rd-party tcPDF library will no longer be bundled with PHPExcel for rendering PDF files through the PDF Writer. The PDF Writer is being rewritten to allow a choice of 3rd party PDF libraries (tcPDF, mPDF, and domPDF initially), none of which will be bundled with PHPExcel, but which can be downloaded seperately from the appropriate sites.GhostBuster: GhostBuster Setup (91520): Added WMI based RestorePoint support Removed test code from program.cs Improved counting. Changed color of ghosted but unfiltered devices. Changed HwEntries into an ObservableCollection. Added Properties Form. Added Properties MenuItem to Context Menu. Added Hide Unfiltered Devices to Context Menu. If you like this tool, leave me a note, rate this project or write a review or Donate to Ghostbuster. Donate to GhostbusterEXCEL??、??、????????:DataPie(??MSSQL 2008、ORACLE、ACCESS 2007): DataPie_V3.2: V3.2, 2012?5?19? ????ORACLE??????。AvalonDock: AvalonDock 2.0.0795: Welcome to the Beta release of AvalonDock 2.0 After 4 months of hard work I'm ready to upload the beta version of AvalonDock 2.0. This new version boosts a lot of new features and now is stable enough to be deployed in production scenarios. For this reason I encourage everyone is using AD 1.3 or earlier to upgrade soon to this new version. The final version is scheduled for the end of June. What is included in Beta: 1) Stability! thanks to all users contribution I’ve corrected a lot of issues...New ProjectsAits HRM: Human Resource ManagermentBeeWix Toolkit: The toolkit is a set of classes we are using here at Beewix for our Social Network project. Church Management: Simple Church Management Software By Lalit Kumar & Ivan Lewis.Client Center for ConfigurationManager: The tool is designed for IT Professionals to troubleshoot SCCM/CM12 Client related Issues. The Client Center for Configuration Manager provides a quick and easy overview of client settings, including running services and Agent settings in a good easy to use, user interface.Common Instance Factory: Provides an abstraction over dependency injection and IoC containers using the abstract factory design pattern. It was created as an alternative to the Common Service Locator, but it does not use the service location anti-pattern and it provides support for releasing instances. Adapters are available for various dependency injection containers, such as Ninject and SimpleInjector, with more to come shortly. There are also WCF extensions available for decoupling services from DI containers.ConfigMgrRegistrationRequest: ConfigMgrRegistrationRequest allows you to simulate a client using System Center 2012 Configuration Manager Client SDK Basically, this project allows you to create Fake CM12 Clients, ideal when you need test load, reports, etc... when you run the tool (as a local Administrator), it will - Open a csv file and send request to register a new client to sccm - Send a update client id to sccm - Request policy - Send a ddr message - Send hinv more info on my blog at http://wmug.co.uk/w...COSC 320 TWIN System v2.0: Migration of previous version due to one month server limitationCultiv Photometadata for Umbraco: The PhotoMetaData package will extract meta data from images that you upload in your Umbraco media section. Dependency Injection Service Provider (DISP): Dependency Injection Service Provider (DISP) is a wrapper or an interface that aim to allow .NET developers use one of the inversion of control (IoC) containers out there such as StructureMap or Ninject from a high level of abstraction, using the same interface and classes without having to worry about the concrete implementation of each of the IoC containers. DISP provides an interface that will create and instance of an IoC container of your election, and provide generic interface to co...DirectPOS.NET: DirectPOS is a set of classes that bypasses OPOS and other libraries to talk to POS devices directly currently focusing on support for Bixolon, Samsung, and Epson thermal printers and some other devices.Dodongo's Quest: Roguelike in C# and XNAEpicCms: epiccms is only a name. The underlying system consists of two components: an api data service that replicates database tables, views, and procedures directly by url routes; a web interface that is very lightweight and purposed only to directly edit database table data. It is the intention that users will have full control over their data, how it is distributed, who has access, and when or how long anything(anyone) has access to all single pieces of data. It is also the intention that users wi...Find Duplicate file: This application is developed in WPF. you can find duplicate files from the file impression not from file size of from file name. Although this process is very time consuming. You can search and delete the similar file from the application itself. you can also open file location and delete manually from windows explorer. HoleFilling: We present a new image completion algorithm powered by a huge database of photographs gathered from the Web. The algorithm patches up holes in images by finding similar image regions in the database that are not only seamless but also semantically valid. Our chief insight is that while the space of images is effectively infinite, the space of semantically differentiable scenes is actually not that large. For many image completion tasks we are able to find similar scenes which conta...ILCC: A C compiler made in C# that generates .NET CIL code, XML, YAML and .NET PInvokeKendo UI framework for Orchard: This is a common location for kendo UI framework and related script libraries to use with Orchard CMS.MASAS SharePoint: This project is all about creating a SharePoint 2010-based capability to use the Multi-Agency Situational Awareness System (of systems) - MASAS. MASAS is focused on the exchange of structured information. This module is focused on using that information in your SharePoint 2010-based applications. Think of it this way - MASAS is an information bucket. MASAS allows you to share structured information by putting information into the bucket and by pulling information out of the bucket. ...MCP History: History Module for CB websiteMediaWikiSPMigrator: This project is aimed to make it easier to migrate from Mediawiki wiki's into SharePoint. The big differentiator is that it will allow you to map templates into a specific content type in SharePoint. NConf - Advanced Configuration Manager: NConf is an advanced configuration system for .Net projects. It's written out of the need for more advanced configuration than what .Net provides. The key features it supports is multiple configuration sources, simple to use syntax, the ability to reload/update configuration at runtime, and the easy ability to implement custom configuration sources.NMEA Interpreter: NMEA Interpreter is a class library created for one of my projects. It's main function is to parse NMEA sentences into usable easy to read and display data.Occupado: Time management for the School enviroment.OmahaMTG Site: Omaha MTG SiteProject Bloodlust Fury: Group project for CIS 375Radar IoC container: Very simple, fast and easy to use IoC container. Don't have any dependencies on external libraries - just pure .NET 4 Client Profile. Minimal size (~18kB in release build) makes it suitable to use in any project type.Service Request System: Service Request System (SRS) is a lightweight application for submitting and managing Service Requests of any type. The application is written in ASP.net (C#), and can utilize any type of database.Sign In As A Different User: Running your browser (IE) in a corporate environment will give you single sign on to web applications running in your intranet. But in some cases you need to access an URL with different credentials (admin purpose, etc.). Applications like SharePoint will provide you a solution right out of the box, but if this is not available the SignInAsADifferentUser project may help you. We as Glück & Kanja Consulting AG deployed such configurations in relation to Microsoft Lync components. Searching the...SimIn - Simulate Input in Your .NET Applications: SimIn is a light-weight .NET library which allows You to send user input to another applications. You can use SimIn in two modes: simulating user input (SendMessages), or control Your mouse. It supports DirectX input simulation, which means you can send mouse or keyboard messages to any DirectX game you want, and the game will register it correctly. SocialVeris: Este projeto consiste em uma rede social da instituição de ensino Veris IBTA. É um projeto de conclusão do curso de Análise e Desenvolvimento de Sistemas.Sprocket: Web application to management tasks in small company. TheList: A web an mobile application oriented to users that need a support in the creation of the supermarket list.Turntable Enhanced: TT Enhanced is a Turntable.fm Chrome extension used for giving the Turntable.fm website a bit of a face-lift. It adds cosmetic changes to the website, room moderation, drop down lists for easier usability, and much more.Web Part Collector: WebPart collector will help you identify any webpart or all webparts that are located inside your site collection

    Read the article

  • Help! cant login to my forum after .htaccess changes

    - by MrRioku
    I'm running a phpbb forum and I installed an SEO friendly URL Mod. After I installed it I wasn't able to login as the admin nor any other users... Well I've been messing around with this problem for a bit and I did find out that it was the .htaccess file that was causing me not to be able to login. I found out if I comment the canonical part out in the .htaccess file, my website allows me to login and see the working mod just fine but I get "http://phone7forum.com/" instead of what I want which is "http://www.phone7forum.com/ : enter code here # HERE IS A GOOD PLACE TO FORCE CANONICAL DOMAIN # RewriteCond %{HTTP_HOST} !^www\.phone7forum\.com$ [NC] # RewriteRule ^(.*)$ http://www.phone7forum.com/$1 [QSA,L,R=301] enter code here I definitely want the "http://www." since its the best method and holds the best weight.. But when I un-comment it, it will not allow me to login as the admin nor any user... Is there anything I can do to fix this matter??? I'd like to add, before I found this website I installed the Mod "Canonical URL" found here: http://www.phpbb.com/customise/db/mod/canonical_url/ Possibly this might be part of my issue? Maybe I should go undo everything that Mod told me to do and then try un-commenting the canonical section in the .htaccess file? Here is my complete .htaccess file as of now that produces the "http://phone7forum.com/" and allows me to login: [code] # Lines That should already be in your .htacess <Files "config.php"> Order Allow,Deny Deny from All </Files> <Files "common.php"> Order Allow,Deny Deny from All </Files> # You may need to un-comment the following lines # Options +FollowSymlinks # To make sure that rewritten dir or file (/|.html) will not load dir.php in case it exist # Options -MultiViews # REMEBER YOU ONLY NEED TO STARD MOD REWRITE ONCE RewriteEngine On # Uncomment the statement below if you want to make use of # HTTP authentication and it does not already work. # This could be required if you are for example using PHP via Apache CGI. # RewriteRule .* - [E=HTTP_AUTHORIZATION:%{HTTP:Authorization},L] # REWRITE BASE RewriteBase / # HERE IS A GOOD PLACE TO FORCE CANONICAL DOMAIN # RewriteCond %{HTTP_HOST} !^www\.phone7forum\.com$ [NC] # RewriteRule ^(.*)$ http://www.phone7forum.com/$1 [QSA,L,R=301] # DO NOT GO FURTHER IF THE REQUESTED FILE / DIR DOES EXISTS RewriteCond %{REQUEST_FILENAME} -f RewriteCond %{REQUEST_FILENAME} -d RewriteRule . - [L] ##################################################### # PHPBB SEO REWRITE RULES ALL MODES ##################################################### # AUTHOR : dcz www.phpbb-seo.com # STARTED : 01/2006 ################################# # FORUMS PAGES ############### # FORUM INDEX REWRITERULE WOULD STAND HERE IF USED. "forum" REQUIRES TO BE SET AS FORUM INDEX # RewriteRule ^forum\.html$ index.php [QSA,L,NC] # FORUM ALL MODES RewriteRule ^(forum|[a-z0-9_-]*-f)([0-9]+)/?(page([0-9]+)\.html)?$ viewforum.php?f=$2&start=$4 [QSA,L,NC] # TOPIC WITH VIRTUAL FOLDER ALL MODES RewriteRule ^(forum|[a-z0-9_-]*-f)([0-9]+)/(topic|[a-z0-9_-]*-t)([0-9]+)(-([0-9]+))?\.html$ viewtopic.php?f=$2&t=$4&start=$6 [QSA,L,NC] # TOPIC WITHOUT FORUM ID & DELIM ALL MODES RewriteRule ^([a-z0-9_-]*)/?(topic|[a-z0-9_-]*-t)([0-9]+)(-([0-9]+))?\.html$ viewtopic.php?forum_uri=$1&t=$3&start=$5 [QSA,L,NC] # PHPBB FILES ALL MODES RewriteRule ^resources/[a-z0-9_-]+/(thumb/)?([0-9]+)$ download/file.php?id=$2&t=$1 [QSA,L,NC] # PROFILES ALL MODES WITH ID RewriteRule ^(member|[a-z0-9_-]*-u)([0-9]+)\.html$ memberlist.php?mode=viewprofile&u=$2 [QSA,L,NC] # USER MESSAGES ALL MODES WITH ID RewriteRule ^(member|[a-z0-9_-]*-u)([0-9]+)-(topics|posts)(-([0-9]+))?\.html$ search.php?author_id=$2&sr=$3&start=$5 [QSA,L,NC] # GROUPS ALL MODES RewriteRule ^(group|[a-z0-9_-]*-g)([0-9]+)(-([0-9]+))?\.html$ memberlist.php?mode=group&g=$2&start=$4 [QSA,L,NC] # POST RewriteRule ^post([0-9]+)\.html$ viewtopic.php?p=$1 [QSA,L,NC] # ACTIVE TOPICS RewriteRule ^active-topics(-([0-9]+))?\.html$ search.php?search_id=active_topics&start=$2&sr=topics [QSA,L,NC] # UNANSWERED TOPICS RewriteRule ^unanswered(-([0-9]+))?\.html$ search.php?search_id=unanswered&start=$2&sr=topics [QSA,L,NC] # NEW POSTS RewriteRule ^newposts(-([0-9]+))?\.html$ search.php?search_id=newposts&start=$2&sr=topics [QSA,L,NC] # UNREAD POSTS RewriteRule ^unreadposts(-([0-9]+))?\.html$ search.php?search_id=unreadposts&start=$2 [QSA,L,NC] # THE TEAM RewriteRule ^the-team\.html$ memberlist.php?mode=leaders [QSA,L,NC] # HERE IS A GOOD PLACE TO ADD OTHER PHPBB RELATED REWRITERULES # FORUM WITHOUT ID & DELIM ALL MODES # THESE THREE LINES MUST BE LOCATED AT THE END OF YOUR HTACCESS TO WORK PROPERLY RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^([a-z0-9_-]+)/?(page([0-9]+)\.html)?$ viewforum.php?forum_uri=$1&start=$3 [QSA,L,NC] # FIX RELATIVE PATHS : FILES RewriteRule ^.+/(style\.php|ucp\.php|mcp\.php|faq\.php|download/file.php)$ $1 [QSA,L,NC,R=301] # FIX RELATIVE PATHS : IMAGES RewriteRule ^.+/(styles/.*|images/.*)/$ $1 [QSA,L,NC,R=301] # END PHPBB PAGES ##################################################### [/code] Does anyone have any clues as to what I need to do? Any help will be greatly appreciated! Thanks, Justin

    Read the article

  • IRQ problem with 2.6.32/2.6.39 kernel on Debian Squeeze x86_64

    - by MasterM
    I recently assembled a new computer so that all hardware is pretty new. Since then I've been experiencing some problem with IRQs when running Debian 6.0. On random occasions, usually after an hour or so of running I hear a beep and this shows up in dmesg: [ 3537.762795] irq 16: nobody cared (try booting with the "irqpoll" option) [ 3537.762797] Pid: 0, comm: swapper Tainted: P W O 2.6.39-2-amd64 #1 [ 3537.762798] Call Trace: [ 3537.762799] <IRQ> [<ffffffff810924d4>] ? __report_bad_irq+0x3a/0xa2 [ 3537.762803] [<ffffffff810926a4>] ? note_interrupt+0x168/0x1da [ 3537.762805] [<ffffffff81090dd4>] ? handle_irq_event_percpu+0x171/0x18f [ 3537.762807] [<ffffffff8100e0e2>] ? read_tsc+0x5/0x16 [ 3537.762809] [<ffffffff8106b8a2>] ? update_ts_time_stats+0x32/0x6b [ 3537.762810] [<ffffffff81090e26>] ? handle_irq_event+0x34/0x52 [ 3537.762812] [<ffffffff81063fb7>] ? sched_clock_idle_wakeup_event+0x12/0x1c [ 3537.762813] [<ffffffff81092df2>] ? handle_fasteoi_irq+0x82/0xa4 [ 3537.762815] [<ffffffff8100aadb>] ? handle_irq+0x1a/0x23 [ 3537.762816] [<ffffffff8100a384>] ? do_IRQ+0x45/0xaa [ 3537.762818] [<ffffffff81332c93>] ? common_interrupt+0x13/0x13 [ 3537.762818] <EOI> [<ffffffff81332c8e>] ? common_interrupt+0xe/0x13 [ 3537.762821] [<ffffffff81026800>] ? native_safe_halt+0x2/0x3 [ 3537.762829] [<ffffffffa016ed58>] ? acpi_idle_do_entry+0x39/0x62 [processor] [ 3537.762831] [<ffffffffa016edde>] ? acpi_idle_enter_c1+0x5d/0xad [processor] [ 3537.762834] [<ffffffff81261033>] ? cpuidle_idle_call+0x11f/0x1cc [ 3537.762835] [<ffffffff81008dd2>] ? cpu_idle+0xab/0xe1 [ 3537.762837] [<ffffffff8169fc60>] ? start_kernel+0x3e0/0x3eb [ 3537.762838] [<ffffffff8169f3c8>] ? x86_64_start_kernel+0x102/0x10f [ 3537.762839] handlers: [ 3537.762840] [<ffffffffa0358d5a>] (rtl8169_interrupt+0x0/0x2d7 [r8169]) [ 3537.762842] [<ffffffffa08ff2ca>] (nv_kern_isr+0x0/0x54 [nvidia]) [ 3537.762902] Disabling IRQ #16 After that Xorg either hogs on CPU or is unstable (up to hanging the system completely). When I restart Xorg everything is fine again and the problem doesn't occur until next reboot. I tried to upgrade the kernel from stock 2.6.32 to 2.6.39 from unstable repository but that didn't help. Booting with irqpoll option only seems to prolong the initial time period after which the problem occurs. I'm using latest NVIDIA drivers and Realtek firmware from firmware-realtek package. I have two GTX 560Ti that run in SLI. Disabling SLI or taking out one card completely doesn't solve the problem either. Output of uname -a is: Linux whitestar 2.6.39-2-amd64 #1 SMP Wed Jun 8 11:01:04 UTC 2011 x86_64 GNU/Linux Output of lspci is: 00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 05) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b5) 00:1c.6 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation Device 1200 (rev a1) 01:00.1 Audio device: nVidia Corporation Device 0e0c (rev a1) 02:00.0 VGA compatible controller: nVidia Corporation Device 1200 (rev a1) 02:00.1 Audio device: nVidia Corporation Device 0e0c (rev a1) 04:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) 06:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) 07:00.0 PCI bridge: Device 1b21:1080 (rev 01) 08:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) 08:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) Contents of /proc/interrupts: CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 0: 77 0 0 0 0 0 0 0 IO-APIC-edge timer 1: 2 0 0 0 0 0 0 0 IO-APIC-edge i8042 8: 1 0 0 0 0 0 0 0 IO-APIC-edge rtc0 9: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi acpi 12: 4 0 0 0 0 0 0 0 IO-APIC-edge i8042 16: 699083 0 0 0 0 0 0 0 IO-APIC-fasteoi nvidia, eth0 17: 87810 0 0 0 0 0 0 0 IO-APIC-fasteoi firewire_ohci, hda_intel, nvidia 18: 242 0 0 0 0 0 0 0 IO-APIC-fasteoi hda_intel 23: 85925 0 0 0 0 0 0 0 IO-APIC-fasteoi ehci_hcd:usb5, ehci_hcd:usb6 40: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 41: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 42: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 43: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 44: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 45: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 46: 79853 0 0 0 0 0 0 0 PCI-MSI-edge ahci 48: 1 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 49: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 50: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 51: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 52: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 53: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 54: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 55: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 56: 1 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 57: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 58: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 59: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 60: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 61: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 62: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 63: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 64: 173506 0 0 0 0 0 0 0 PCI-MSI-edge hda_intel NMI: 482 89 25 13 277 24 11 10 Non-maskable interrupts LOC: 783857 194752 114133 70577 372438 179065 117179 162016 Local timer interrupts SPU: 0 0 0 0 0 0 0 0 Spurious interrupts PMI: 482 89 25 13 277 24 11 10 Performance monitoring interrupts IWI: 0 0 0 0 0 0 0 0 IRQ work interrupts RES: 131917 46750 7432 3291 150003 9576 3435 3067 Rescheduling interrupts CAL: 2759 6563 7150 6997 5387 7140 7269 6678 Function call interrupts TLB: 4396 2038 1336 492 5434 1896 1121 606 TLB shootdowns TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 0 0 0 0 Machine check exceptions MCP: 37 37 37 37 37 37 37 37 Machine check polls ERR: 0 MIS: 0 Last but not least, right after boot-up those lines are usually present in dmesg: [ 18.367094] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 18.458859] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj. I'm not sure if it's related or a symptom of a bigger problem so I'm posting it just in case. I don't really know what other information might be of relevance here. Don't hesitate to ask for more in the comments.

    Read the article

  • unexplainable packet drops with 5 ethernet NICs and low traffic on Ubuntu

    - by jon
    I'm stuck on problem where my machine started to drops packets with no sign of ANY system load or high interrupt usage after an upgrade to Ubuntu 12.04. My server is a network monitoring sensor, running Ubuntu LTS 12.04, it passively collects packets from 5 interfaces doing network intrusion type stuff. Before the upgrade I managed to collect 200+GB of packets a day while writing them to disk with around 0% packet loss depending on the day with the help of CPU affinity and NIC IRQ to CPU bindings. Now I lose a great deal of packets with none of my applications running and at very low PPS rate which a modern workstation NIC would have no trouble with. Specs: x64 Xeon 4 cores 3.2 Ghz 16 GB RAM NICs: 5 Intel Pro NICs using the e1000 driver (NAPI). [1] eth0 and eth1 are integrated NICs (in the motherboard) There are 2 other PCI-X network cards, each with 2 Ethernet ports. 3 of the interfaces are running at Gigabit Ethernet, the others are not because they're attached to hubs. Specs: [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm uptime 17:36:00 up 1:43, 2 users, load average: 0.00, 0.01, 0.05 # uname -a Linux nms 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I also have the CPU governor set to performance mode and irqbalance off. The problem still occurs with them on. # lspci -t -vv -[0000:00]-+-00.0 Intel Corporation E7520 Memory Controller Hub +-02.0-[01-03]--+-00.0-[02]----0e.0 Dell PowerEdge Expandable RAID controller 4 | \-00.2-[03]-- +-04.0-[04]-- +-05.0-[05-07]--+-00.0-[06]----07.0 Intel Corporation 82541GI Gigabit Ethernet Controller | \-00.2-[07]----08.0 Intel Corporation 82541GI Gigabit Ethernet Controller +-06.0-[08-0a]--+-00.0-[09]--+-04.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | | \-04.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-00.2-[0a]--+-02.0 Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card 3.3V | +-03.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-03.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller +-1e.0-[0b]----0d.0 Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge \-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller I believe the NIC nor the NIC drivers are dropping the packets because ethtool reports 0 under rx_missed_errors and rx_no_buffer_count for each interface. On the old system, if it couldn't keep up this is where the drops would be. I drop packets on multiple interfaces just about every second, usually in small increments of 2-4. I tried all these sysctl values, I'm currently using the uncommented ones. # cat /etc/sysctl.conf # high net.core.netdev_max_backlog = 3000000 net.core.rmem_max = 16000000 net.core.rmem_default = 8000000 # defaults #net.core.netdev_max_backlog = 1000 #net.core.rmem_max = 131071 #net.core.rmem_default = 163480 # moderate #net.core.netdev_max_backlog = 10000 #net.core.rmem_max = 33554432 #net.core.rmem_default = 33554432 Here's an example of an interface stats report with ethtool. They are all the same, nothing is out of the ordinary ( I think ), so I'm only going to show one: ethtool -S eth2 NIC statistics: rx_packets: 7498 tx_packets: 0 rx_bytes: 2722585 tx_bytes: 0 rx_broadcast: 327 tx_broadcast: 0 rx_multicast: 1504 tx_multicast: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 multicast: 1504 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 0 tx_tcp_seg_failed: 0 rx_flow_control_xon: 0 rx_flow_control_xoff: 0 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_long_byte_count: 2722585 rx_csum_offload_good: 0 rx_csum_offload_errors: 0 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 01 # ifconfig eth0 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:373348 errors:16 dropped:95 overruns:0 frame:16 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:356830572 (356.8 MB) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8d UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:13616 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8690528 (8.6 MB) TX bytes:0 (0.0 B) eth2 Link encap:Ethernet HWaddr 00:04:23:e1:77:6a UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:7750 errors:0 dropped:471 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2780935 (2.7 MB) TX bytes:0 (0.0 B) eth3 Link encap:Ethernet HWaddr 00:04:23:e1:77:6b UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:5112 errors:0 dropped:206 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:639472 (639.4 KB) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:04:23:b6:35:6c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:961467 errors:0 dropped:935 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:958561305 (958.5 MB) TX bytes:0 (0.0 B) eth5 Link encap:Ethernet HWaddr 00:04:23:b6:35:6d inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4264 errors:0 dropped:16 overruns:0 frame:0 TX packets:699 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:572228 (572.2 KB) TX bytes:124456 (124.4 KB) I tried the defaults, then started to play around with settings. I wasn't using any flow control and I increased the RxDescriptor count to 4096 before the upgrade as well without any problems. # cat /etc/modprobe.d/e1000.conf options e1000 XsumRX=0,0,0,0,0 RxDescriptors=4096,4096,4096,4096,4096 FlowControl=0,0,0,0,0 debug=16 Here's my network configuration file, I turned off checksumming and various offloading mechanisms along with setting CPU affinity with heavy use interfaces getting an entire CPU and light use interfaces sharing a CPU. I used these settings prior to the upgrade without problems. # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual pre-up /sbin/ethtool -G eth0 rx 4096 tx 0 pre-up /sbin/ethtool -K eth0 gro off gso off rx off pre-up /sbin/ethtool -A eth0 rx off autoneg off up ifconfig eth0 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/48/smp_affinity down ifconfig eth0 down post-down /sbin/ethtool -G eth0 rx 256 tx 256 post-down /sbin/ethtool -K eth0 gro on gso on rx on post-down /sbin/ethtool -A eth0 rx on autoneg on auto eth1 iface eth1 inet manual pre-up /sbin/ethtool -G eth1 rx 4096 tx 0 pre-up /sbin/ethtool -K eth1 gro off gso off rx off pre-up /sbin/ethtool -A eth1 rx off autoneg off up ifconfig eth1 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/49/smp_affinity down ifconfig eth1 down post-down /sbin/ethtool -G eth1 rx 256 tx 256 post-down /sbin/ethtool -K eth1 gro on gso on rx on post-down /sbin/ethtool -A eth1 rx on autoneg on auto eth2 iface eth2 inet manual pre-up /sbin/ethtool -G eth2 rx 4096 tx 0 pre-up /sbin/ethtool -K eth2 gro off gso off rx off pre-up /sbin/ethtool -A eth2 rx off autoneg off up ifconfig eth2 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "1" > /proc/irq/82/smp_affinity down ifconfig eth2 down post-down /sbin/ethtool -G eth2 rx 256 tx 256 post-down /sbin/ethtool -K eth2 gro on gso on rx on post-down /sbin/ethtool -A eth2 rx on autoneg on auto eth3 iface eth3 inet manual pre-up /sbin/ethtool -G eth3 rx 4096 tx 0 pre-up /sbin/ethtool -K eth3 gro off gso off rx off pre-up /sbin/ethtool -A eth3 rx off autoneg off up ifconfig eth3 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "2" > /proc/irq/83/smp_affinity down ifconfig eth3 down post-down /sbin/ethtool -G eth3 rx 256 tx 256 post-down /sbin/ethtool -K eth3 gro on gso on rx on post-down /sbin/ethtool -A eth3 rx on autoneg on auto eth4 iface eth4 inet manual pre-up /sbin/ethtool -G eth4 rx 4096 tx 0 pre-up /sbin/ethtool -K eth4 gro off gso off rx off pre-up /sbin/ethtool -A eth4 rx off autoneg off up ifconfig eth4 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/77/smp_affinity down ifconfig eth4 down post-down /sbin/ethtool -G eth4 rx 256 tx 256 post-down /sbin/ethtool -K eth4 gro on gso on rx on post-down /sbin/ethtool -A eth4 rx on autoneg on auto eth5 iface eth5 inet static pre-up /etc/fw.conf address 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 192.168.1.2 192.168.1.3 up ifconfig eth5 up post-up echo "8" > /proc/irq/77/smp_affinity down ifconfig eth5 down Here's a few examples of packet drops, i ran one after another, probabling totaling 3 or 4 seconds. You can see increases in the drops from the 1st and 3rd. This was a non-busy time, very little traffic. # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 505 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 507 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 227 lo: 0 eth2: 512 eth1: 0 eth5: 17 eth0: 105 eth4: 1039 I tried the pci=noacpi options. With and without, it's the same. This is what my interrupt stats looked like before the upgrade, after, with ACPI on PCI it showed multiple NICs bound to an interrupt and shared with other devices such as USB drives which I didn't like so I think i'm going to keep it with ACPI off as it's easier to designate sole purpose interrupts. Is there any advantage I would have using the default i.e. ACPI w/ PCI. ? # cat /etc/default/grub | grep CMD_LINE GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1 noacpi pci=noacpi" GRUB_CMDLINE_LINUX="" # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 45 0 0 16 IO-APIC-edge timer 1: 1 0 0 7936 IO-APIC-edge i8042 2: 0 0 0 0 XT-PIC-XT-PIC cascade 6: 0 0 0 3 IO-APIC-edge floppy 8: 0 0 0 1 IO-APIC-edge rtc0 9: 0 0 0 0 IO-APIC-edge acpi 12: 0 0 0 1809 IO-APIC-edge i8042 14: 1 0 0 4498 IO-APIC-edge ata_piix 15: 0 0 0 0 IO-APIC-edge ata_piix 16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 18: 0 0 0 1350 IO-APIC-fasteoi uhci_hcd:usb4, radeon 19: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 0 0 0 4099 IO-APIC-fasteoi ehci_hcd:usb1 38: 0 0 0 61963 IO-APIC-fasteoi megaraid 48: 0 0 1002319 4 IO-APIC-fasteoi eth0 49: 0 0 38772 3 IO-APIC-fasteoi eth1 77: 0 0 130076 432159 IO-APIC-fasteoi eth4 78: 0 0 0 23917 IO-APIC-fasteoi eth5 82: 1329033 0 0 4 IO-APIC-fasteoi eth2 83: 0 4886525 0 6 IO-APIC-fasteoi eth3 NMI: 5 6 4 5 Non-maskable interrupts LOC: 61409 57076 64257 114764 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts IWI: 0 0 0 0 IRQ work interrupts RES: 17956 25333 13436 14789 Rescheduling interrupts CAL: 22436 607 539 478 Function call interrupts TLB: 1525 1458 4600 4151 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 16 16 16 16 Machine check polls ERR: 0 MIS: 0 Here's sample output of vmstat, showing the system. Barebones system right now. root@nms:~# vmstat -S m 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 14992 192 1029 0 0 56 2 419 29 1 0 99 0 0 0 0 14992 192 1029 0 0 0 0 922 27 0 0 100 0 0 0 0 14991 192 1029 0 0 0 36 763 50 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 646 35 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 722 54 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 793 27 0 0 100 0 ^C Here's dmesg output. I can't figure out why my PCI-X slots are negotiated as PCI. The network cards are all PCI-X with the exception of the integrated NICs that came with the server. In the output below it looks as if eth3 and eth2 negotiated at PCI-X speeds rather than PCI:66Mhz. Wouldn't they all drop to PCI:66Mhz? If your integrated NICs are PCI, as labeled below (eth0,eth1), then wouldn't all devices on your bus speed drop down to that slower bus speed? If not, I still don't know why only one of my NICs ( each has two ethernet ports) is labeled as PCI-X in the output below. Does that mean it is running at PCI-X speeds are is it showing that it's capable? # dmesg | grep e1000 [ 3678.349337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3678.349342] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3678.349394] e1000 0000:06:07.0: PCI->APIC IRQ transform: INT A -> IRQ 48 [ 3678.409725] e1000 0000:06:07.0: Receive Descriptors set to 4096 [ 3678.409730] e1000 0000:06:07.0: Checksum Offload Disabled [ 3678.409734] e1000 0000:06:07.0: Flow Control Disabled [ 3678.586409] e1000 0000:06:07.0: eth0: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8c [ 3678.586419] e1000 0000:06:07.0: eth0: Intel(R) PRO/1000 Network Connection [ 3678.586642] e1000 0000:07:08.0: PCI->APIC IRQ transform: INT A -> IRQ 49 [ 3678.649854] e1000 0000:07:08.0: Receive Descriptors set to 4096 [ 3678.649859] e1000 0000:07:08.0: Checksum Offload Disabled [ 3678.649863] e1000 0000:07:08.0: Flow Control Disabled [ 3678.826436] e1000 0000:07:08.0: eth1: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8d [ 3678.826444] e1000 0000:07:08.0: eth1: Intel(R) PRO/1000 Network Connection [ 3678.826627] e1000 0000:09:04.0: PCI->APIC IRQ transform: INT A -> IRQ 82 [ 3679.093266] e1000 0000:09:04.0: Receive Descriptors set to 4096 [ 3679.093271] e1000 0000:09:04.0: Checksum Offload Disabled [ 3679.093275] e1000 0000:09:04.0: Flow Control Disabled [ 3679.130239] e1000 0000:09:04.0: eth2: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6a [ 3679.130246] e1000 0000:09:04.0: eth2: Intel(R) PRO/1000 Network Connection [ 3679.130449] e1000 0000:09:04.1: PCI->APIC IRQ transform: INT B -> IRQ 83 [ 3679.397312] e1000 0000:09:04.1: Receive Descriptors set to 4096 [ 3679.397318] e1000 0000:09:04.1: Checksum Offload Disabled [ 3679.397321] e1000 0000:09:04.1: Flow Control Disabled [ 3679.434350] e1000 0000:09:04.1: eth3: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6b [ 3679.434360] e1000 0000:09:04.1: eth3: Intel(R) PRO/1000 Network Connection [ 3679.434553] e1000 0000:0a:03.0: PCI->APIC IRQ transform: INT A -> IRQ 77 [ 3679.704072] e1000 0000:0a:03.0: Receive Descriptors set to 4096 [ 3679.704077] e1000 0000:0a:03.0: Checksum Offload Disabled [ 3679.704081] e1000 0000:0a:03.0: Flow Control Disabled [ 3679.738364] e1000 0000:0a:03.0: eth4: (PCI:33MHz:64-bit) 00:04:23:b6:35:6c [ 3679.738371] e1000 0000:0a:03.0: eth4: Intel(R) PRO/1000 Network Connection [ 3679.738538] e1000 0000:0a:03.1: PCI->APIC IRQ transform: INT B -> IRQ 78 [ 3680.046060] e1000 0000:0a:03.1: eth5: (PCI:33MHz:64-bit) 00:04:23:b6:35:6d [ 3680.046067] e1000 0000:0a:03.1: eth5: Intel(R) PRO/1000 Network Connection [ 3682.132415] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.224423] e1000: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.316385] e1000: eth2 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.408391] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.500396] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.708401] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX At first I thought it was the NIC drivers but I'm not so sure. I really have no idea where else to look at the moment. Any help is greatly appreciated as I'm struggling with this. If you need more information just ask. Thanks! [1]http://www.cs.fsu.edu/~baker/devices/lxr/http/source/linux/Documentation/networking/e1000.txt?v=2.6.11.8 [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm

    Read the article

< Previous Page | 1 2 3