Search Results

Search found 20052 results on 803 pages for 'multiple selectors'.

Page 3/803 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Best Usage of Multiple Computers For a Developer

    - by whaley
    I have two Macbook Pros - both are comparable in hardware. One is a 17" and the other a 15". The 17" has a slightly swifter CPU clock speed, but beyond that the differences are completely negligible. I tried a setup a while back where I had the 17" hooked up to an external monitor in the middle of my desk with the 15" laptop immediately to the right of it, and was using teleport to control the 15" from my 17". All development, terminal usage, etc. etc. was being done on the 17" and the 15" was primarily used for email / IM / IRC... or anything secondary to what I was working on. I have a MobileMe account so preferences were synced, but otherwise I didn't really use anything else to keep the computers in sync (I use dropbox/git but probably not optimally). For reasons I can't put my finger on, this setup never felt quite right. A few things that irked me was the 15" was way under-utlized and the 17" was overutilized having 2 laptops and a 21" monitor all on one desk actually took up lots of desk space and it felt like I had too much to look at. I reverted back to just using the 17" and the external monitor and keeping the 15" around the house (and using it very sparingly). For those of you who are using multiple laptops (or just multiple machines for that matter), I'd like to see setups that work for you for when you have 2 or more machines that gives you optimal productivity and why. I'd like to give this one more shot but with a different approach than my previous - which was using the 15" as a machine for secondary things (communication, reading documentation, etc. etc).

    Read the article

  • Repurposing CSS Class Selectors

    - by limefartlek
    I don't know what this technique is called, I've only seen it used. It's a way to repurpose the same selectors with CSS. For example if I create h1 { font-size:18px; color:#FFFFFF; font-family:Arial, Helvetica;margin:0; padding:0; } h2 { font-size:18px; color:#000000; font-family:Arial, Helvetica; font-weight:normal;margin:0; padding:0; } I can repurpose the h selectors with something like .whatever h1 { color: #000; font: 2.0em arial, sans-serif; background-color: #fff3ea; margin: 50px 0px 0px 50px; } .whatever h2 { color: #000; font: 1.7em bold arial, sans-serif; background-color: #fff3ea; margin: 25px 0px 25px 75px; } If h1 and h2 appear inside of a div called whatever, then they will assume those properties. You can do this with ID tags and class tags but I can't for the life of me remember how this is done. Any thoughts?

    Read the article

  • Multiple domains and product categories but one company?

    - by Brad
    Hi Guys, My company is expanding online, and we are wondering the best way to go about our eCommerce strategy. We sell a wide range of products of a single material, lets use ceramics as an example. The current competition in our niche online is medium level. We currently have one site selling all our range: ceramicstuff.com However I have just found that ceramickitchenware.com, ceramicbowls.com, etc are currently unregistered, despite quite decent traffic search volume around those keywords monthly. What do you guys think about registering these domains to increase traffic? Would I put a standalone sites on those domains, or do I point them to my main domain? Or do I use them a "micro" sites to offer information, and then link to buy at my main domain, etc? Summary: I'm looking to employ "spammy" type SEO tricks, multiple domains, etc but the key point is I will be generating REAL content, and offering a REAL QUALITY product. How to proceed? Thanks!

    Read the article

  • Multiple Monitors using nvidia-prime or bumblebee on Ubuntu 13.10

    - by user205626
    I've been unable to get multiple monitors to work with Ubuntu 13.10 using nvidia-prime or bumblebee. Could someone point me in the right direction? With nvidia-prime, I've tried the xorg.conf here http://us.download.nvidia.com/XFree86/Linux-x86/319.12/README/randr14.html, but I boot into "low graphics" mode and have to revert to get a desktop back. Any suggestions would be appreciated. Thanks. Edit: I've given up on nvidia-prime; I missed the fact that it never turns off the discrete card... So, I'm back to trying to get VIRTUAL displays working with Bumblebee.

    Read the article

  • How to handle multiple domains correctly? [closed]

    - by Eric Itzhak
    Possible Duplicate: Could I buy a domain name to increase traffic to my site like this? I have a website with multiple keyword based domains ( 2 actully) Now both domains are common google searches for the topic. What i'm intrested is to handle the domains as such that google can recognize the seconed domain with the same page rank as the primary domain, so it will also appear on the first page. My question is how do i do it correctly so i will help SEO? meaning i want the 2nd domain to be on the first page, because the primary is on the first page for it's keyword. do i simple put a redirect in the index.php file? Or to do a 301 redirect? or change the .htaccess file? Or create a domain pointer in the Control panel?

    Read the article

  • Render a 3D scene in multiple windows - extended panoramic view

    - by teodron
    Is there any resource location on how to view a 3D scene from an application or a game on multiple windows or monitors? Each window should continue drawing from where the neighbouring one left off (in the end, the result should be a mosaic of the scene). My idea is to use a camera for each window and have a reference position and orientation for a meta-camera object that is used to correctly offset the other camera. Since there are quite some elements to consider (window specs, viewport properties, position-orientation of each render camera), what is the correct way to update the individual cameras considering the position and orientation of the central, meta-camera? I currently cannot make the cameras present the scene contiguously (and I am reluctant in working out the transformations without checking whether this is the actual way of doing things).

    Read the article

  • Multiple Base Addresses and Multiple Endpoints in WCF

    - by mnhab
    I'm using two bindings TCP and HTTP. I want to give mex data on both bindings. What I want is that the mexHttpBinding only exposes the HTTP services while the mexTcpBinding exposes TCP services only. Or is this possible that I access stats service only from HTTP binding and the eventLogging service from TCP? For Example: For TCP I should only have net.tcp://localhost:9001/ABC/mex net.tcp://localhost:9001/ABC/eventLogging For HTTP http://localhost:9002/ABC/stats http://localhost:9002/ABC/mex When I connect with any of the base address (using the WCF Test Client) I'm able to access all the services? Like when I connect with net.tcp://localhost:9001/ABC I'm able to use the services which are offered on the HTTP binding. Why is that so? <system.serviceModel> <services> <service behaviorConfiguration="ABCServiceBehavior" name="ABC.Data.DataServiceWCF"> <endpoint address="eventLogging" binding="netTcpBinding" contract="ABC.Campaign.IEventLoggingService" /> <endpoint address="mex" binding="mexTcpBinding" bindingConfiguration="" contract="IMetadataExchange" /> <endpoint address="stats" binding="basicHttpBinding" contract="ABC.Data.IStatsService" /> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:9001/ABC" /> <add baseAddress="http://localhost:9002/ABC" /> </baseAddresses> </host> </service> </services> <behaviors> <serviceBehaviors> <behavior name="ABCServiceBehavior"> <serviceMetadata httpGetEnabled="false" /> <serviceDebug includeExceptionDetailInFaults="true" /> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel>

    Read the article

  • How does load balancing work with multiple server with multiple DBs

    - by Matt
    I guess what im looking for is a description on how this all works together. I'm used to setting up one server with maybe another server to handel the DB. My question is how does the load balancer work where do all the script(php,python) files go? If i make a change to one i have to rsync them to all the server that the balancer refers to? Also does each server need client side DB's installed so they can reference the DB's that are on other servers? If there is a site that explains all this i would be happy to read it.

    Read the article

  • (RoR) How to: link multiple apps, multiple URLs, one database

    - by Samson
    Hello. I am currently developing a site using Ruby on Rails. I am still a beginner who just started around a month ago. I use InstantRails on Windows 7. Here's my question. Let's say app A is functional using MYSQL database A_development. The files such as views and controller are under folder 'A'. I now know how to, say for example, link www.app.com to this app by opening port 80 and changing some lines in the mySQL config. In this app, you can register your username, login, and post some messages. I now want to create some pretty identical apps say B and C. The only thing different will be the posts that shows, and the views. You can still log in with the same username, and everything is saved in the same database. I now want the URLs to look something like A.app.com leading to app A, B.app.com leading to app B, etc. Can that be achieved? How? I've been googling for a few days already and I'm still lost. As I'm new to this forum, I'm not quite sure what info do you guys need. Please list and I'll provide them asap. Any help will be appreciated! Thanks.

    Read the article

  • Configuration tools for multiple monitors for X / Linux

    - by richard
    I have Ubuntu 10.04 running gnome and two monitors. I am wondering if a can get a better multi-monitor configuration tool. The one I have, gnome-display-properties, has too many problems, including: When I swapped my monitors over, the narrower (external) one now on the left. There is a width calculation error, such that I have a virtual monitor the width of the wide-monitor on the narrow-monitor and part of the wide monitor. And a virtual narrow-monitor on the remainder of the wide-monitor. Also the visible mouse pointer does is not aligned with the active spot, an x offset of one monitor width. I would like, in approximate order of importance: nobugs. to be able to select which is primary monitor. to have multiple configurations. configurations to be automatically selected based on which monitors are attached. configurations to be cycled (reliably) when display mode key is pressed. when a display is deactivated, for windows to migrate to remaining monitors. option to not change display resolution when mirroring, but to use side/top blanking bars to pad out screen.

    Read the article

  • Issue tracking multiple domains with Google Analytics

    - by user359650
    I have 2 domains mydomain.com and mydomain.net which I'm trying to track with the same GA code. Here are the options I turned on: Subdomains of mydomain ON Examples: www.mydomain.com -and- apps.mydomain.com -and- store.mydomain.com Multiple top-level domains of mydomain ON Examples: mydomain.uk -and- mydomain.cn -and- mydomain.fr Which gave me the following code: _gaq.push(['_setAccount', 'UA-123456789-1']); _gaq.push(['_setDomainName', 'mydomain.com']); _gaq.push(['_setAllowLinker', true]); _gaq.push(['_trackPageview']); In this help page I read that _setDomainName must be changed for each domain which I did: -if you go to mydomain.net you get _gaq.push(['_setDomainName', 'mydomain.net']); -if you go to mydomain.com you get _gaq.push(['_setDomainName', 'mydomain.com']); When I generate traffic on both mydomain.dom and mydomain.net and watches GA push requests made with firebug I can see requests generated for both domains and the parameter called utmhn has the proper domain value (which matches that of _setDomainName and the browser address bar). However when I monitor the realtime statistics under Home->Real-Time->Overview I see pageviews for mydomain.net BUT NOT for mydomain.dom :( What am I missing to properly track both domains? PS: in the help page I mentioned they talk about setting up cross links which I didn't do for now as my understanding is that it shouldn't be needed to get what I'm trying to do to work. Also I want to mention that I do not have any tracking code for any of these 2 domains other than the one I mentioned.

    Read the article

  • multiple godaddy domains to home router then reverse proxy to multiple internal servers [closed]

    - by Dan
    I need someone to steer me correctly... advising on all required components. I have multiple domains with godaddy, say site1.com , site2.com, site3.net I have multiple home LAMP servers... one on say, lampsrv1 = 192.168.0.2:8080 (windows) and lampsrv2 = 192.168.0.3:9080 (linux srv2) I would like to have server1.site1.com point to lampsrv1 and server2.site1.com point to lampsrv2 . I may also want server1.site2.com also point to my lampsrv1 as an option. My thinking is - I have a dedicated linux srv1 with a reverse proxy server behind the router, ie Apache or NGINX or equivalent directing to appropriate LAMP server. It's the godaddy subdomains, cnames or redirections, etc I'm having a challenge with for starters... I have tested apache with virtual servers but can't get proxying to work based on host header info... seems to go to one address making me think its actually the apache reverse proxying that's not quite working. Finally to add to this, my router has a dynamic IP but does lease for quite a while but that would be my final piece. So, I'm sure this might be a popular question but can't seem to piece this together. I need someone who has actually configured this scenario to advise but will take other suggestions.... please indicate if you have successfully configured this.

    Read the article

  • Multiple monitors showing same screen but different resolutions

    - by Luis Alvarado
    Is it possible to have 2 or more monitors showing the same screen, for example the same desktop but with different resolutions. Like the clone option in Nvidia or the mirror option using the Display settings in Ubuntu but instead of showing the same output with the same resolution, the both show the same output using a resolution that is native for each monitor connected. In my case if I have a netbook that has max resolution of 1360x768 and a TV that has 1280x1024, the would both show the same desktop but each with their own resolution that is compatible for each device. This would help in trying to find a resolution that works on both monitors and in cases like a mini netbook and a huge TV it would solve issues like having max 800x600 in one monitor and min 1024x768 in the other. In the case I tested I was using an HDMI cable but this question also involves VGA and any other connection. I have 3 tests scenarios for this: Scenario 1 - Laptop HP DV6000 (Intel Integrated Video) with 1360x760 connected to a Samsung LED 42 TV that has 1280x900. Scenario 2 - Laptop EEE with 1024x600 (Intel Integrated Video) connected to Sony LCD TV that supports 1280x900. Scenario 3 - Intel Desktop with Nvidia 440 GT with HDMI connected to Soneview 32' TV that supports 1920x1080 and VGA connected to an Epson Video Beam that supports 1280x1024 max. In this 3 scenarios I need to be able to show the same desktop and same views but on different resolutions for each output device. UPDATE: Tested with Xubuntu and the way it handles multiple monitors is precisely what I am asking. The ability to handle the resolution of different monitors showing the same thing.

    Read the article

  • Unity 3d support for multiple X-screens

    - by stewbond
    I've installed Ubuntu 12.04 this weekend and have had problems getting Unity3d to work with my triple monitor set-up. I've installed the latest nVidia drivers for my 2 nVidia video cards and have used NVIDIA X Server Settings to configure everything. If I stick each monitor on a separate X screen, all but the primary X screen will appear white and the cursor will be a black X. I can start a terminal on this screen but cannot drag other windows to it. If I kill the "Nautilus" process, the white background disappears and I see my desktop background, but my cursor is still an X and I still cannot drag windows to it. If I enable TwinView, I can get one screen on two monitors to work properly, but the white screen remains on my third monitor. In addition, I don't like using TwinView because my full-screen applications get stretched. My current solution is to "Enable Xinerama", use all separate X screens and revert to Unity2d. I'd love a solution to this as Ubuntu 12.10 is not planned to support Unity-2d and prefer the aesthetics of 3d anyways. I can provide Xorg.conf for all configurations and any other suggested diagnostic information. Below is my closest-to-working xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:38:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" RightOf "Screen2" Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Microvitec PLC MV191" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "CRT-1" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "Microvitec PLC MV191" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Unknown" ModelName "Microvitec PLC MV191" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTS 450" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9500 GT" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTS 450" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device3" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTS 450" BusID "PCI:1:0:0" Screen 2 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP-0: 1280x1024_75 +0+0; DFP-0: 1280x1024 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP-2: 1280x1024_75 +0+0; DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Device3" Monitor "Monitor3" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection Other people have had similar issues. I haven't been successful at any of the few suggestions submitted. Can not get Dual Monitors to work on Different GPUs http://askubuntu.com/questions/30412/3-monitors-with-2-video-cards-not-working?rq=1 How to get second display to work alongside primary display? http://askubuntu.com/questions/148007/multiple-monitors-only-work-with-unity-2d/201086#201086 xorg.conf and Unity3D?

    Read the article

  • How to layout class definition when inheriting from multiple interfaces

    - by gabr
    Given two interface definitions ... IOmniWorkItem = interface ['{3CE2762F-B7A3-4490-BF22-2109C042EAD1}'] function GetData: TOmniValue; function GetResult: TOmniValue; function GetUniqueID: int64; procedure SetResult(const value: TOmniValue); // procedure Cancel; function DetachException: Exception; function FatalException: Exception; function IsCanceled: boolean; function IsExceptional: boolean; property Data: TOmniValue read GetData; property Result: TOmniValue read GetResult write SetResult; property UniqueID: int64 read GetUniqueID; end; IOmniWorkItemEx = interface ['{3B48D012-CF1C-4B47-A4A0-3072A9067A3E}'] function GetOnWorkItemDone: TOmniWorkItemDoneDelegate; function GetOnWorkItemDone_Asy: TOmniWorkItemDoneDelegate; procedure SetOnWorkItemDone(const Value: TOmniWorkItemDoneDelegate); procedure SetOnWorkItemDone_Asy(const Value: TOmniWorkItemDoneDelegate); // property OnWorkItemDone: TOmniWorkItemDoneDelegate read GetOnWorkItemDone write SetOnWorkItemDone; property OnWorkItemDone_Asy: TOmniWorkItemDoneDelegate read GetOnWorkItemDone_Asy write SetOnWorkItemDone_Asy; end; ... what are your ideas of laying out class declaration that inherits from both of them? My current idea (but I don't know if I'm happy with it): TOmniWorkItem = class(TInterfacedObject, IOmniWorkItem, IOmniWorkItemEx) strict private FData : TOmniValue; FOnWorkItemDone : TOmniWorkItemDoneDelegate; FOnWorkItemDone_Asy: TOmniWorkItemDoneDelegate; FResult : TOmniValue; FUniqueID : int64; strict protected procedure FreeException; protected //IOmniWorkItem function GetData: TOmniValue; function GetResult: TOmniValue; function GetUniqueID: int64; procedure SetResult(const value: TOmniValue); protected //IOmniWorkItemEx function GetOnWorkItemDone: TOmniWorkItemDoneDelegate; function GetOnWorkItemDone_Asy: TOmniWorkItemDoneDelegate; procedure SetOnWorkItemDone(const Value: TOmniWorkItemDoneDelegate); procedure SetOnWorkItemDone_Asy(const Value: TOmniWorkItemDoneDelegate); public constructor Create(const data: TOmniValue; uniqueID: int64); destructor Destroy; override; public //IOmniWorkItem procedure Cancel; function DetachException: Exception; function FatalException: Exception; function IsCanceled: boolean; function IsExceptional: boolean; property Data: TOmniValue read GetData; property Result: TOmniValue read GetResult write SetResult; property UniqueID: int64 read GetUniqueID; public //IOmniWorkItemEx property OnWorkItemDone: TOmniWorkItemDoneDelegate read GetOnWorkItemDone write SetOnWorkItemDone; property OnWorkItemDone_Asy: TOmniWorkItemDoneDelegate read GetOnWorkItemDone_Asy write SetOnWorkItemDone_Asy; end; As noted in answers, composition is a good approach for this example but I'm not sure it applies in all cases. Sometimes I'm using multiple inheritance just to split read and write access to some property into public (typically read-only) and private (typically write-only) part. Does composition still apply here? I'm not really sure as I would have to move the property in question out from the main class and I'm not sure that's the correct way to do it. Example: // public part of the interface interface IOmniWorkItemConfig = interface function OnExecute(const aTask: TOmniBackgroundWorkerDelegate): IOmniWorkItemConfig; function OnRequestDone(const aTask: TOmniWorkItemDoneDelegate): IOmniWorkItemConfig; function OnRequestDone_Asy(const aTask: TOmniWorkItemDoneDelegate): IOmniWorkItemConfig; end; // private part of the interface IOmniWorkItemConfigEx = interface ['{42CEC5CB-404F-4868-AE81-6A13AD7E3C6B}'] function GetOnExecute: TOmniBackgroundWorkerDelegate; function GetOnRequestDone: TOmniWorkItemDoneDelegate; function GetOnRequestDone_Asy: TOmniWorkItemDoneDelegate; end; // implementing class TOmniWorkItemConfig = class(TInterfacedObject, IOmniWorkItemConfig, IOmniWorkItemConfigEx) strict private FOnExecute : TOmniBackgroundWorkerDelegate; FOnRequestDone : TOmniWorkItemDoneDelegate; FOnRequestDone_Asy: TOmniWorkItemDoneDelegate; public constructor Create(defaults: IOmniWorkItemConfig = nil); public //IOmniWorkItemConfig function OnExecute(const aTask: TOmniBackgroundWorkerDelegate): IOmniWorkItemConfig; function OnRequestDone(const aTask: TOmniWorkItemDoneDelegate): IOmniWorkItemConfig; function OnRequestDone_Asy(const aTask: TOmniWorkItemDoneDelegate): IOmniWorkItemConfig; public //IOmniWorkItemConfigEx function GetOnExecute: TOmniBackgroundWorkerDelegate; function GetOnRequestDone: TOmniWorkItemDoneDelegate; function GetOnRequestDone_Asy: TOmniWorkItemDoneDelegate; end;

    Read the article

  • Use CSS Selectors with HtmlUnit

    - by kerry
    HtmlUnit is a great library for performing web integration tests in Java.  But sometimes node traversal can be somewhat cumbersome. Fear not fellow automated tester (good for you!).  I found a great little project on Github that will allow you to query your document for elements via css selectors similar to jQuery. The project is located at https://github.com/chrsan/css-selectors.  You can use Maven to build it, or download 1.0.2 here.  Beware.  I will not be updating this link so I suggest you download the latest code. In any case, you can use it like so: // from HtmlUnit getting started final WebClient webClient = new WebClient(); final HtmlPage page = webClient.getPage("http://htmlunit.sourceforge.net"); final DOMNodeSelector cssSelector = new DOMNodeSelector(page.getDocumentElement()); final Set elements = cssSelector.querySelectorAll("div.section h2"); final Node first = elements.iterator().next(); assertThat(first.getTextContent(), equalTo("HtmlUnit")); The only problem here is that the querySelectAll returns a Set<Node>.  Not HtmlElement like we may want in some cases.   However, if you were to reflect on the Set, you would find that it is indeed a Set of HtmlElement objects. Typically, I like to create a base class for my web tests.  Just for fun, I am using the $ method similar to jQuery. public class WebTestBase { protected WebClient webClient; protected HtmlPage htmlPage; protected void goTo(final String url){ return (HtmlPage)webClient.getPage(url); } protected List $(final String cssSelector) { final DOMNodeSelector cssSelector = new DOMNodeSelector(htmlPage.getDocumentElement()); final Set nodes = cssSelector.querySelectorAll("div.section h2"); // for some reason Set cannot be cast to Set? final List elements = new ArrayList(nodes.size()); for (final Node node : nodes) { elements.add((HtmlElement)node); } return elements; } } Now we can write tests like this: public class LoginWebTest extends WebTestBase { @Test public void login_page_has_instructions() throws Exception { goTo(baseUrl + "/login") assertThat( $("p.instructions").size(), equalTo(1) ); } }

    Read the article

  • Need multiple sound outputs to multiple speakers

    - by Usman Sajeel Haider
    How do I play 3 different music tracks at the same time on my computer, such that song1 is played in speaker1, song2 in speaker2... Is this possible programatically? What additional hardware will I need? Do I need 3 seperate sound cards? Given that the hardware is in place, how would I "route" the sound output for a particular song to a particular speaker. Alternatively, is there a special hardware that can handle multiple inputs and outputs? Appreciate your expert opinions.

    Read the article

  • Script for Creating Multiple ZIP archives from Multiple Folders

    - by user39288
    I want to be able to right click multiple folders inside of a directory in nautilus, and be able to create seperate zip archives from those folders in that same directory. If possible it would also be great if it automatically deleted the old folders. So, if I have 30 folders, I want to select those using control-shift, then go to scripts and run the script, and just have those 30 folders compressed into seperate .zip archives, and have the old folders deleted (if possible). Anyone know how to accomplish this? I suck with terminal, and am looking for a script solution.

    Read the article

  • Multiple parameters vs single parameter(object with multiple properties)

    - by Shwetanka
    I have an Entity Student with following properties - (name, joinedOn, birthday, age, batch, etc.) and a function fetchStudents(<params>). I want to fetch students based on multiple filters. In my method I have two ways to pass filters. Pass all filters as params to the method Make a class StudentCriteria with filters as fields and then pass the object of this class While working in java I always go with the second option but recently I'm working in php and I was advised to go with the first way. I am unable to figure out which way is better in maintaining the code, reusability and performance wise. Thanks.

    Read the article

  • BAM Data Control in multiple ADF Faces Components

    - by [email protected]
    As we know Oracle BAM data control instance sharing is not supported.When two or more ADF Faces components must display the same data, and are bound to the same Oracle BAM data control definition, we have to make sure that we wrap each ADF Faces component in an ADF task flow, and set the Data Control Scope to isolated. This blog will show a small sample to demonstrate this. In this sample we will create a Pie and Bar using same BAM DC, such that both components use same Data control but have isolated scope.This sample can be downloaded  fromSample1.zip Set-up: Create a BAM data control using employees DO (sample) Steps: Right click on View Controller project and select "New->ADF Task Flow" Check "Create Bounded Task Flow" and give some meaningful name (ex:EmpPieTF.xml ) to the TaskFlow(TF) and click on "OK"CreateTF.bmpFrom the "Components Palette", drag and drop "View" into the task flow diagram. Give a meaningful name to the view. Double Click and Click "Ok" for  "Create New JSF Page Fragment" From "Data Controls" drag and drop "Employees->Query"  into this jsff page as "Graph->Pie" (Pie: Sales_Number and Slices: Salesperson) Repeat step 1 through 4 for another Task Flow (ex: EmpBarTF). From "Data Controls" drag and drop "Employees->Query"  into this jsff page as "Graph->Bar" (Bars :Sales_Number and X-axis : Salesperson). Open the Taskflow created in step 2. In the Structure Pane, right click on "Task Flow Definition -EmpPieTF" Click "Insert inside Task Flow Definition - EmpPieTF -> ADF Task Flow -> Data Control Scope". Click "OK"TFDCScope.bmpFor the "Data Control Scope", In the Property Inspector ->General section, change data control scope from Shared to Isolated. Repeat step 8 through 11 for the 2nd Task flow created. Now create a new jspx page example: Main.jspxDrag and drop both the Task flows (ex: "EmpPieTF" and "EmpBarTF") as regions. Surround with panel components as needed.Run the page Main.jspxMainPage.bmpNow when the page runs although both components are created using same Data control the bindings are not shared and each component will have a separate instance of the data control.

    Read the article

  • How to use multiple monitors effectivelly

    - by maaartinus
    I'm currently using a single monitor, since I see no value in something like this mentioned in this answer. It may be a good exercise for my neck, but besides of this I see no use therein at all. This amounts to 5760x1200 pixels, which is nearly 7M pixels, just fantastic, except for me not being a cyklop-han. The ratio of 24:5 is IMHO too bad for this to be usable. I don't even think that two 16:10 monitors side by side is a good idea. I never tried so I may be completely wrong, but I suppose that the 4:3 ratio would be much better for this. Or even 1:1, but no such thing is available (with some exceptions, either very expensive or very low resolution). Does anybody use two monitors arranged vertically (resulting in 16:20)? or two pivoted monitors side by side (resulting in 20:16)? or another such variant?

    Read the article

  • Settings for multiple monitors are not stored

    - by JJD
    I am running Ubuntu 12.04. on a Lenovo Thinkpad T400. I connected an external monitor as a second display. The laptop stands under the external screen. The laptop has a native resolution of 1440x900 (16:10), the external monitor 1280x1024 (5:4). There are two graphic adapters: one internal Intel GMA 4500 MHD and an discrete ATI card. Currently, the integrated Intel is enabled. I use the Display application to arrange the position of the monitors so it look like this: The problem: Whenever I restart my computer the configuration gets lost. First, the displays are mirrored instead of extended. I have to press Fn + F7 two times to switch to extended mode. Second, the Display settings still look like this: I know this worked once when I was running Ubuntu 10.10. I cannot tell since when it does not work. Do you know how I can permanently store the settings?

    Read the article

  • Why old (301) links stay on Google when breaking site down to multiple domains

    - by Sampo Sarrala
    Some background: We did have single site and single domain (let's call it mainsite.com) with product information, however things have changed since and product database has grown fast. So we decided to move some major products/manufacturers under their own domains (let's call one of them subsite.com) while still using our main database/codebase. What we've done: Added subsite.com domain for product 1 by Great Products Co. Some new nice looking front pages, info pages, etc. Detail pages that will use information from original db. Redirected product/group links from mainsite.com using 301 redirect. Verified that redirects works as expected. Waited some time for Google reindexing (over 30 days, I've heard it should be more than enough). Results: If I search our moved products from Google then it will found them and list them but with old links to our main page like mainsite.com/group/product1 but it should show link to new site subsite.com/product1. Links from Goole redirects as they should, as said redirects are verified [301]. Main question: Any reasons why Google would not follow 301 redirects and update links so that they will point to our new mfg/product site subsite.com?

    Read the article

  • One domain and multiple website in folders

    - by User1212
    I am going to create a network with one domain, e.g. example.com then going to manage my websites in folders. Look below for example: www.example.com/market www.example.com/freebies www.example.com/personalblog www.example.com/shop Consider that all four websites have different design and codes. From SEO perspective, is it recommended or I should use subdomains or buy four domains for each website?

    Read the article

  • Connecting/Removing a Second Monitor with Multiple Workspaces

    - by Ben
    I am running 12.04 on a laptop. I use workspaces extensively to manage different projects. When I take my laptop home, I plug in an additional monitor. The problem I am having is that whenever I plug in the additional monitor, all of my windows, regardless of what workspace they were in before I connected the additional monitor, move to workspace 1. This forces me to go through all the windows and manually move the windows back to where I had them. I don't think adding a monitor to each workspace should cause windows to move around between workspaces. Any thoughts or ideas on how to fix this? Know of any workarounds? Thanks in advance!

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >