Search Results

Search found 3236 results on 130 pages for 'pg restore'.

Page 3/130 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • why is usb disk corrupted by Vista restore

    - by Martin
    I have a laptop with Vista Business on an 80GB disk. I have created a full backup and stored that on the original 80GB drive. On my new 320GB disk, I have created a partition with exactly the same number of bytes as the original 80GB disk. I swap the disks so that the 320GB is internal, and the 80GB is in a USB caddy. I boot from the NEO restore CD and everything looks fine: I select the dump on the USB drive, target is drive C:, start the restore. After a few seconds, the restore fails with "not enough disks in machine or disk not large enough" error (I did note the exact phrase). I then swap the 80GB disk back to the internal drive, but the thing is unbootable. Why has the restore process scrubbed the boot status of the USB drive ?

    Read the article

  • Norton Backup "Failed to Restore"

    - by Teknophilia
    I recently had one of my computers (XP) die on me. I had it's files set to automatically backup to another PC's HD using Norton. I've tried using Norton restore on the second computer to try and restore some files (word documents, pictures), but when I try to do this, I get a dialog box saying that it "Failed to Restore". When I click to continue, it shows a list of the files I tried to restore, along with a status indicator for each file (which says "invalid file"). Any ideas?

    Read the article

  • Disk Utility Restore causes "Could not validate resource - Invalid Argument"

    - by Yahoo
    I have a problem with Disk Utility on Mac OS X 10.6. I have an image of Windows that I would like to use as a bootable volume on a pen drive or external hard drive. The thing is: When I try to restore the volume from the image I get an error: "Restore Failure: Could not validate resource - Invalid Argument" I read some information about that error on the Internet. I converted the image into .iso (Mac OS Extended/ISO (Joliet) Hybrid Image) format and then got this error: "Restore Failure: Could not find any scan information. The source image needs to be imagescanned before it can be restored." When I try to scan the image for Restore, I get the first message. I really read a lot of information about this topic on the Internet, but I haven't found the solution. I tried both ISO and DMG formats; I don't know which is best.

    Read the article

  • Restore Point area getting deleted

    - by PaoloFCantoni
    Hi, I'm running a multi-boot scenario (which I have been successfully on a number of machines for a number of years). I have Windows 7 (32 bit) on one partition and Windows 7 (64 bit) on another and a common data partition (which happens to store the user hives for each OS instance). For some reason, on one particular machine (a HP Pavilion notebook) the restore points get trashed after a reboot. I can create them (both manually and automatically), but after some (but not all) reboots the restore points get trashed. I have all three partitions set (on both OSs) to hold restore information. This setup has worked successfully on other machines for at least 12 months. I'm out of ideas... I DO need the restore points as I do "bleeding edge" stuff and they've saved my bacon on other machines in the past... TIA, Paolo

    Read the article

  • Restoring the Fonts folder by using a restore point

    - by ryalho
    I am an idiot. Who would have thought that installing 2 gigs of fonts would be detrimental to the boot up time for the most common design programs such as adobe illustrator. I would like to restore the font folder because I am no longer able to just delete the fonts. It takes too long. So when I right-click the fonts folder and select "Restore Previous Versions" I am able to find a restore point, but the "Restore" button is greyed out. this leads me to think that I cannot change the settings of files in the windows directory. Oh and there are 34,000 fonts I need gone. Thanks

    Read the article

  • ERROR: Failed to build gem native extension on Mavericks

    - by Kyle Decot
    I'm attempting to run bundle in my Rails project on OSX 10.9. It fails when getting to the pg gem with this error: Gem::Installer::ExtensionBuildError: ERROR: Failed to build gem native extension. /Users/kyledecot/.rvm/rubies/ruby-2.0.0-p247/bin/ruby extconf.rb checking for pg_config... no No pg_config... trying anyway. If building fails, please try again with --with-pg-config=/path/to/pg_config checking for libpq-fe.h... yes checking for libpq/libpq-fs.h... yes checking for pg_config_manual.h... yes checking for PQconnectdb() in -lpq... yes checking for PQconnectionUsedPassword()... yes checking for PQisthreadsafe()... yes checking for PQprepare()... yes checking for PQexecParams()... yes checking for PQescapeString()... yes checking for PQescapeStringConn()... yes checking for PQescapeLiteral()... yes checking for PQescapeIdentifier()... yes checking for PQgetCancel()... yes checking for lo_create()... yes checking for pg_encoding_to_char()... yes checking for pg_char_to_encoding()... yes checking for PQsetClientEncoding()... yes checking for PQlibVersion()... yes checking for PQping()... yes checking for PQsetSingleRowMode()... yes checking for rb_encdb_alias()... yes checking for rb_enc_alias()... no checking for rb_thread_call_without_gvl()... yes checking for rb_thread_call_with_gvl()... yes checking for rb_thread_fd_select()... yes checking for rb_w32_wrap_io_handle()... no checking for PGRES_COPY_BOTH in libpq-fe.h... no checking for PGRES_SINGLE_TUPLE in libpq-fe.h... no checking for PG_DIAG_TABLE_NAME in libpq-fe.h... no checking for struct pgNotify.extra in libpq-fe.h... yes checking for unistd.h... yes checking for ruby/st.h... yes creating extconf.h creating Makefile make "DESTDIR=" compiling gvl_wrappers.c clang: warning: argument unused during compilation: '-fno-fast-math' compiling pg.c clang: warning: argument unused during compilation: '-fno-fast-math' pg.c:272:9: warning: implicit declaration of function 'PQlibVersion' is invalid in C99 [-Wimplicit-function-declaration] return INT2NUM(PQlibVersion()); ^ In file included from pg.c:48: In file included from ./pg.h:17: In file included from /Users/kyledecot/.rvm/rubies/ruby-2.0.0-p247/include/ruby-2.0.0/ruby.h:33: /Users/kyledecot/.rvm/rubies/ruby-2.0.0-p247/include/ruby-2.0.0/ruby/ruby.h:1167:21: note: instantiated from: # define INT2NUM(v) INT2FIX((int)(v)) ^ pg.c:272:9: note: instantiated from: return INT2NUM(PQlibVersion()); ^ pg.c:272:17: note: instantiated from: return INT2NUM(PQlibVersion()); ^ pg.c:375:48: error: use of undeclared identifier 'PQPING_OK' rb_define_const(rb_mPGconstants, "PQPING_OK", INT2FIX(PQPING_OK)); ^ pg.c:375:56: note: instantiated from: rb_define_const(rb_mPGconstants, "PQPING_OK", INT2FIX(PQPING_OK)); ^ pg.c:377:52: error: use of undeclared identifier 'PQPING_REJECT' rb_define_const(rb_mPGconstants, "PQPING_REJECT", INT2FIX(PQPING_REJECT)); ^ pg.c:377:60: note: instantiated from: rb_define_const(rb_mPGconstants, "PQPING_REJECT", INT2FIX(PQPING_REJECT)); ^ pg.c:379:57: error: use of undeclared identifier 'PQPING_NO_RESPONSE' rb_define_const(rb_mPGconstants, "PQPING_NO_RESPONSE", INT2FIX(PQPING_NO_RESPONSE)); ^ pg.c:379:65: note: instantiated from: rb_define_const(rb_mPGconstants, "PQPING_NO_RESPONSE", INT2FIX(PQPING_NO_RESPONSE)); ^ pg.c:381:56: error: use of undeclared identifier 'PQPING_NO_ATTEMPT' rb_define_const(rb_mPGconstants, "PQPING_NO_ATTEMPT", INT2FIX(PQPING_NO_ATTEMPT)); ^ pg.c:381:64: note: instantiated from: rb_define_const(rb_mPGconstants, "PQPING_NO_ATTEMPT", INT2FIX(PQPING_NO_ATTEMPT)); ^ 1 warning and 4 errors generated. make: *** [pg.o] Error 1 Gem files will remain installed in /Users/kyledecot/.rvm/gems/ruby-2.0.0-p247@skateboxes/gems/pg-0.17.0 for inspection. Results logged to /Users/kyledecot/.rvm/gems/ruby-2.0.0-p247@skateboxes/gems/pg-0.17.0/ext/gem_make.out An error occurred while installing pg (0.17.0), and Bundler cannot continue. Make sure that `gem install pg -v '0.17.0'` succeeds before bundling.

    Read the article

  • pg.so problem with Ruby in Windows

    - by Alexander
    I have installed the pg module with help of gem install pg Which returned Successfully installed pg-0.8.0-x86-mswin32-60 When a .rb-file looks like this require 'rubygems' require 'pg' I get an LoadError (exception 126) which tells me that it can't find the module C:/Ruby/lib/ruby/gems/1.8/gems/pg-0.8.0-x86-mswin32-60/lib/pg.so. I heard something about that it is a Linux compilation. I'm really stuck so I really welcome suggestions. I have also installed PostgreSQL, I use Windows XP.

    Read the article

  • PostgreSQL Backup/Restore

    - by Ian
    What's the best way to backup a postgresql database? I've tried using the documentation at www.postgresql.org, but I always get integrity errors when restoring. Right now I'm using this for backup: pg_dump -U myuser -d mydatabase db.pg.dump for restore: pg_restore -c -r -U myuser -d mydatabase db.pg.dump But I'm not getting the desired results..

    Read the article

  • Restore monitor detection to one only or restore start menu to bottom

    - by Mark
    I have a co-worker that is no longer able to see his start menu. He used to have it pinned to the left edge of his screen. I tried to troubleshoot it a bit and discovered if we do Windows + R then "cmd" [enter] the command prompt opens (but we don't see the start menu or run box), meaning the start menu is somewhere, just off screen. Restarting doesn't help. Is there some way to force Windows to think it only has a single monitor? It seems to "think" it has two but there's only one and we can get the Start menu back. Or, is there a way to restore the start menu to the bottom? Additional info We are able to right-click the desktop for display settings, etc. We can also get into Windows Explorer (via Ctrl + E) so if we need any of that to restore settings we can do it.

    Read the article

  • Perforce Restore From Multiple Checkpoint Files?

    - by AJ
    Hi all, I am working with a very large (~11GB) checkpoint file and trying to do a -jr (journal restore) operation. About half way through the file, I'm hitting an entry which causes an error to occur. I'm unable to come up with a conventional way to print, edit, and save changes to the offending line. So right now I'm splitting the checkpoint into files of 500k lines each...up to 47 files and counting. My question is, once I have these separate files: Can I run journal restore on each one separately to check for errors? Once fixed, is it necessary to merge them back together again to do my full journal restore? Any other ideas on how to tackle this problem would be appreciated. Thanks in advance, -aj

    Read the article

  • Restore monitor detection to one only or restore start menu to bottom [Windows 7]

    - by Mark
    I have a co-worker that is no longer able to see his start menu. He used to have it pinned to the left edge of his screen. I tried to troubleshoot it a bit and discovered if we do Windows + R then "cmd" [enter] the command prompt opens (but we don't see the start menu or run box), meaning the start menu is somewhere, just off screen. Restarting doesn't help. Is there some way to force Windows to think it only has a single monitor? It seems to "think" it has two but there's only one and we can get the Start menu back. Or, is there a way to restore the start menu to the bottom? Additional info We are able to right-click the desktop for display settings, etc. We can also get into Windows Explorer (via Ctrl + E) so if we need any of that to restore settings we can do it.

    Read the article

  • Restore only changed files with duplicity

    - by Ventura
    Hello Guys, I've a problem. Duplicity is perfect for backups, I love so much that can be able to do incremental diff tars, but ... when restoring duplicity seems don't apply same concept. Basically I need to restore only changed files (obviously after a full backup) but I can't figure how do that. When I try to restore a directory I get: Restore destination directory /Volumes/Data/Backups/Srv1 already exists. I need to backup a directory (and I don't have any problems in doing that) and setup a mirror on another machine. Thanks!

    Read the article

  • Backup and restore.

    - by Xavierjazz
    I have a Thinkpad T60 with a 150GIg internal hard drive. XP Pro SP3. I also have a similar hard drive that used to be in another laptop connected via USB. It contains only data. I have cleared out a lot of duplicate files and now would like to back both up. I have Retrospect and a brand new 1Tbyte drive for this purpose. Can I back up the whole computer (both drives) but, in case only one fails, can I just restore that drive or do I have to restore both drives at the same time? I don't understand how partitions work so might I be able to partition the 1T drive and restore each smaller drive independently? Thanks.

    Read the article

  • Full Backup & Restore for Windows Vista

    - by Thomas Matthews
    I'm looking for a freeware or low cost application that will backup everything, including registry on Windows Vista Home Premium and to restore from a CDROM disk. The destination is an external hard drive on USB 2.0. Searching on SuperUser and Stack Overflow show articles, but don't mention full backup of the registry and complete restore using CDROM. I would also like to have compressed output and incremental backups. One article mentions CloneZilla, but their web page says that the incremental feature is not supported. I am using Windows Vista Home Premium, Service Pack 1. I need to backup 200 GB onto a 230 GB drive and would like to have multiple backups (thus the need for compression). Other requirements: Single file restore Quality is more important than performance. Application must run on Windows Vista. Extra: Run as daemon or background task on 4 user system. Thanks

    Read the article

  • System Restore Points

    - by Ross Lordon
    Currently I am investigating how to schedule an automatic initiation of a system restore point for all of the workstations in my office. It seems that Task Scheduler already has some nice defaults (screenshots below). Even the history for this task verifies that it is running successfully. However, when I go to Recovery in the Control Panel it only lists the System Restore Points one for every previous for only 3 weeks back even if I check the show more restore points box. Why don't the additional ones appear? Would there be a better way to implement a solution, like via group policy or a script? Is there any documentation on this online? I've been having a hard time tracking anything down except how to subvert group policy disabling this feature.

    Read the article

  • After recovery to restore point, Windows 7 missing pinned items and favorites

    - by Michael Levy
    I believe a recent windows update was interrupted. The next day, I could not logon and was presented with the error "User Profile Service service failed the logon. User profile cannot be loaded". I followed some advice from http://answers.microsoft.com/en-us/windows/forum/windows_vista-security/help-user-profile-service-service-failed-the-logon/4ed66b21-c23e-42f1-98b2-706dcf931fae and logged in with a different admin account and used system restore to restore to a recent restore point. Most everything is working fine, but I have noticed two odd things: Any items that were pinned to my start menu or task bar were not accessible. I had to un-pin and re-pin the items. In Windows Explorer, my favorites are gone and I can't seem to add any favorites. If I browse to a folder and right click on the Favorites Icon and select "add current location to favorites" nothing is saved. I'd appreciate any explanation to understand why these things did not get recovered properly and any help fixing the favorite functionality.

    Read the article

  • Guaranteed Restore Points as Fallback Method

    - by Mike Dietrich
    Thanks to the great audience yesterday in the Upgrade & Migration Workshop in Utrecht. That was really fun and I was amazed by our new facilities (and the  "wellness" lights surrounding the plenum room's walls). And another reason why I like to do these workshops is that often I learn new things from you So credits here to Rick van  Ek who has highlighted the following topic to me. Yesterday (and in some previous workshops) I did mention during the discussion about Fallback Strategies that you'll have to switch on Flashback Database beforehand to create a guaranteed restore point in case you'll encounter an issue during the database upgrade. I knew that we've made it possible since Oracle Database 11.2 to switch Flashback Database on without taking the database into MOUNT status (you could switch it off anyway while the database is open before in all releases). But before Oracle Database 11.2 that did require MOUNT status. SQL> create restore point rp1 guarantee flashback database ; create restore point rp1 guarantee flashback database * ERROR at line 1: ORA-38784: Cannot create restore point 'RP1'. ORA-38787: Creating the first guaranteed restore point requires mount mode when flashback database is off. But Rick did mention that I won't need to switch Flashback Database On to create a guaranteed restore point. And he's right - in older releases I would have had to go into MOUNT state to define the restore point which meant to restart the database. But in 11.2 that's no necessary anymore. And the same will apply when you upgrade your pre-11.2 database (e.g. an Oracle Database 10.2.0.4) to Oracle Database 11.2. As soon as you start your "old" not-yet-upgraded database in your 11.2 environment with STARTUP UPGRADE you can define a guaranteed restore point. If you tail the alert.log you'll see that the database will start the RVWR (Recovery Writer) background process - you'll just have to make sure that you'd define the values for db_recovery_file_dest_size and db_recovery_file_dest. SQL> startup upgrade ORACLE instance started. Total System Global Area  417546240 bytes Fixed Size                  2228944 bytes Variable Size             134221104 bytes Database Buffers          272629760 bytes Redo Buffers                8466432 bytes Database mounted. Database opened. SQL> create restore point grpt guarantee flashback database; Restore point created.SQL> drop restore point grpt; And don't forget to drop that restore point the sooner or later as it is guaranteed - and will fill up your Fast Recovery Area pretty quickly Just on the side: in any case archivelog mode is required if you'd like to work with restore points. - Mike

    Read the article

  • Program to restore open windows after crash

    - by Noah
    Are there any programs (for PC) that will constantly monitor what programs and windows within those programs you have open, and then restore each of those windows in case of a crash/forced restart? (looking specifically for Outlook, but open to all ideas)? Something similar to Chrome's feature where after a crash, it says "Looks like Chrome didn't shut down properly. Would you like to restore your open tabs?"

    Read the article

  • Windows 7 Ultimate Restore From Another Machine

    - by Guy Thomas
    The situation I have an old machine running Windows Server 2008. I make a backup of selected directories. New Machine: I install Windows 7 Ultimate (and Windows Server 2008 [dual boot]) I cannot restore those files that I backed-up on the old machine. On the New machine neither the Windows 7 or Windows Server 2008 Restore (Recovery) can 'see' the backup files even though they are on the local machine. Is this behaviour (non-behaviour) 'by design' or am I missing something?

    Read the article

  • USING a Windows 7 Restore Point

    - by Guy Thomas
    What I seek is advice, or experience of, actually USING a Windows 7 Restore Point in ANGER. I have created the restore points, can see them, and read the instructions. I also realize it won't harm my documents, but are there any pit-falls? Actually the machine is a quiet, under-used with no recent program additions, so I don't anticipate any complications, nevertheless gotchas and tips are appreciated.

    Read the article

  • SQL Server 2008 Restore hangs on 100%

    - by CL4NCY
    Hi, I have backed up a large database from SQL 2005 and am trying to restore it to a SQL 2008 database. It seems to work ok until it gets to 100% when it hangs indefinitely. I've managed to restore smaller databases to this server ok. Any ideas?

    Read the article

  • Suggestion: ALLFILES option for RESTORE

    - by Greg Low
    The default action when performing a backup is to append to the backup file yet the default action when restoring a backup is to restore just the first file.I constantly come across customer situations where they are puzzled that they seem to have lost data after they have completed a restore. Invariably, it's just that they haven't restored all the backups contained within a single OS file. This happens most commonly with log backups but also happens when they have not restored the most recent database backup file.It is not trivial to achieve this within simple T-SQL scripts, when the number of backup files within the OS file is unknown. It really should be.I'd like to see a FILES=ALLFILES option on the RESTORE command. For RESTORE DATABASE, it should restore the most recent database backup plus any subsequent log files. For RESTORE LOG (which is the most important missing option), it should just restore all relevant log backups that are contained.If you agree, you know what to do: please vote:  https://connect.microsoft.com/SQLServer/feedback/details/769204/option-to-restore-all-backups-files-within-a-media-setAlternately, how would you write a T-SQL command to restore all log backups within a single OS file where the number of files is unknown? Would love to hear creative solutions because all the ones that I think of are pretty messy and need dynamic SQL. 

    Read the article

  • Command line scripts to restore the 4 system databases of MS SQL Server 2008

    - by ciscokid
    Hi there, can someone give me some advice on how to restore the 4 system databases (master, msdb, model, tempdb) of a sql server 2008 please? I've already done some testing myself (on restoring the master database) with the following commad line script as a result: ::set variables set dbname=master set dbdirectory=C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA title Restoring %dbname% database net stop mssqlserver cd C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Binn sqlservr -m sqlcmd -Slocalhost -E -Q "restore database master from disk='c:\master.bak' WITH REPLACE" net start mssqlserver pause After the execution of the 'sqlservr -m' command (used to start the server instance in single-user mode, which is only necessary when restoring the MASTER database), the script stops. So in order to execute the last 2 commands I need to separate the script into 2 smaller scripts, and run them one after the other. Does anyone has an idea on how I can merge them into one single script that runs completely without any interruption? I also want to restore the other 3 system databases using command line scripts like this one. Can someone please advice me how I need to go on? I've already noticed that restoring the temdb is not so easy, but there has to be a way... Looking forward to your advice!

    Read the article

  • How to restore PostgreSQL database from .tar file?

    - by Stephen
    I have all PostgreSQL databases backed up during incremental backups using WHM, which creates a $dbName.tar file. Data is stored in these .tar files, but I do not know how to restore it back into the individual databases via SSH. In particular the file location. I have been using: pg_restore -d client03 /backup/cpbackup/daily/client03/psql/client03.tar which generates the error 'could not open input file: Permission denied' Any assistance appreciated.

    Read the article

  • how to restore grub

    - by takeshin
    During copying files via lan my Ubuntu Server 10.04 hung up and I had to reset the computer. After reboot, I got: Grub error 17, so I tried the rescue alternate CD, but I got a info, that no partitions were found on the disk. I used testdisk to restore the partitions. Using fdisk -l shows the partitions now, but when the system boots up I does nothing but displays: L234: When I plug the drive to another computer, it is not automatically mounted and I can't access the data. What to do now? How to restore the grub and boot up the system?

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >