Search Results

Search found 162 results on 7 pages for 'socks'.

Page 3/7 | < Previous Page | 1 2 3 4 5 6 7  | Next Page >

• Proxying/Tunneling IPSec traffic via netcat or SOCKS?

  - by MattC

  I have a client that is using a SonicWall router as their VPN concentrator. I downloaded the client software and set up the router as a peer. My issue is that my company uses a dual DMZ setup, meaning we have an interior firewall, then a bunch of DMZ servers, then an external firewall, then finally the telco router. In this setup, the interior firewall has no way to communicate with the exterior firewall since they are on two totally separate subnets. The communication occurs through the servers that straddle the networks. In this case, I need some way to forward the ISAKMP/IPSec traffic from my desktop out to the Internet. My usual trick of using netcat on the intermediate proxy server doesn't work here since it's not TCP/UDP traffic as far as I can tell. All of my previous experience with VPN's have been using SSL-based VPN's which are clearly very easily proxy-able. Any help would be appreciated, thanks!

  Read the article

• Set up a proxy on a remote Linux server?

  - by Isaac Waller

  In order to watch Hulu and other sites which are not available in my region (Canada). I would like to set up my own proxy server in the USA on a Linode for my Macbook running Mac OS X. On my Macbook, I would like to set up the proxy server in the OS, instead of the browser so all apps use it. I believe Mac OS X supports HTTP and SOCKS proxies. What type of proxy should I use, and what server software should I use on the Linux machine?

  Read the article

• How to connect to a SOCKS Proxy from an iPhone/iPod Touch?

  - by GeneQ

  I like to surf securely and privately via a SOCKS proxy which I created via SSH tunneling, on the Mac. I used the SSH client on my Mac to achieve this. Then I thought, since the iPhone OS is essentially Mac OS, the same trick might work also on the iPhone. I managed to create a SSh tunnel on my iPhone via the Terminal (iPhone's Terminal). (Yes, it's jail-broken) ssh -D [port] [email protected] At this stage my iPhone is SOCKS proxy. However, there doesn't seem to be a way in the iPhone networking preference panel to specify a SOCKS proxy. Someone suggest creating a Proxy Auto-Contig (PAC) file to workaround this, but that sounds complicated. Any ideas how to make iPhone use it's own SOCKS proxy?

  Read the article

• Socks5 proxy "Dante" leaves many child processes stuck in FIN_WAIT2 / CLOSE_WAIT state

  - by Asad R.

  I'm running dante v1.2.1 as a SOCKS proxy server. The proxy works fine but at the end of the day there are around 40-50 or more child processes of sockd running even though there are no active connections. lsof shows that the child processes all have sockets in the CLOSE_WAIT and FIN_WAIT2 state. These child processes stay in this state unless I manually killall/restart the daemon. I'm running Gentoo Linux on a 2.6.24-23-xen kernel. I recently upgraded from dante v1.1.19-r4 which was giving me the exact same problem. Is this a configuration issue with Dante, my system, or is it a coding issue in the dante code?

  Read the article

• proxy software that supports parallel transfer

  - by est

  Hi guys, I need to setup a really fast proxy server in a remote server, here's the scenario: The server prefetches 3KB of data, mostly HTTP resources. The server send to client 3KB of data, instead of traditional HTTP or SOCKS proxy, the server open multithreaded transfer with 3 connections, send 1KB of data per thread to each connection The client receives 1KBx3, and combine them to the original 3KB data, and return as a local HTTP proxy server. The client display the original data in browser via the local HTTP proxy The latency is not important as long as the transfer rate is good. Does any software like this exist? It's better if it's open source or free ones.

  Read the article

• Colliding network addresses

  - by joepd

  A customer is using the same address space as the company network. I need to connect with Cisco VPN Client to the network of the customer, without affecting local connectivity. To keep all working, I connect from a VM to avoid network addressing collisions. This works, but I'm looking for a way to get rid of the VM. Is it possible to connect with Cisco VPN Client 4.8 from Windows 7, without changing the 'normal' routing? How to tell specific applications (most importantly: Putty, VNC, mstsc, psql) to resolve their routes to the VPN instead of the default network interface? Have been hearing about SOCKS-proxies, is that something that could be made to work? I fear that this is a a bit of a crude question, but I'd be happy to specify more details/context.

  Read the article

• SSH tunnel for socks5 proxy is slow with concurrent load

  - by RawwrBag

  I ssh to a remote AWS server using Ubuntu. I use ssh's port forwarding capabilities to do this. I have tried forwarding a dynamic port (ssh -D) or a single port (ssh -L with dante running as a remote socks server). Both are equally slow. I also tried different ciphers (ssh -c). Concurrent TCP connections pretty much do not work. For example, I can go to speedtest.net and start a test (which is fairly fast, probably maxes out my line speed) and if I try and do anything (i.e. load google.com) while the test is still running, all the additional connections seem to hang until the speed test is over. I realize OpenSSH is single-threaded. Is this the problem? It doesn't even show up on my top. Same goes for sshd on the remote server -- no processor hit. Is there anyway to bump ssh performance or should I step up to OpenVPN or something better suited for this?

  Read the article

• How to parse a raw HTTP response?

  - by Ed

  If I have a raw HTTP response as a string: HTTP/1.1 200 OK Date: Tue, 11 May 2010 07:28:30 GMT Expires: -1 Cache-Control: private, max-age=0 Content-Type: text/html; charset=UTF-8 Server: gws X-XSS-Protection: 1; mode=block Connection: close <!doctype html><html>...</html> Is there an easy way I can parse it into an HttpListenerResponse object? Or at least some kind .NET object so I don't have to work with raw responses. What I'm doing currently is extracting the header key/value pairs and setting them on the HttpListenerResponse. But some headers can't be set, and then I have to cut out the body of the response and write it to the OutputStream. But the body could be gzipped, or it could be an image, which I can't get to work yet. And some responses contain random characters everywhere, which looks like an encoding problem. It's a lot of trouble. I'm getting a raw response because I'm using SOCKS to send an HTTP request. The program I'm working on is basically an HTTP proxy that can route requests through a SOCKS proxy, like Privoxy does.

  Read the article

• How often is authenticated SOCKS5 used as an HTTP proxy in organizations?

  - by brainsnorkel

  I'm wondering how frequently organisations use SOCKS5 as their web proxy protocol over, say, HTTP or authenticated HTTP proxies. Should an application even bother supporting SOCKS5 as an HTTP proxy? What percentage of organisations use SOCKS as a HTTP proxy? If you work in an organisation where you use SOCKS5, particularly authenticated SOCKS5, as the means of achieving HTTP Internet connectivity I'd be interested in hearing your thoughts. If you have experience with requirements for SOCKS5 proxies in your software I'd like to hear your thoughts too.

  Read the article

• c or C++ or other language

  - by efer

  How do i add SOCKS support to my application? and where can i get the libs? any help appriciated thanks

  Read the article

• Dynamic fowarding with SOCKS5 proxy [on hold]

  - by bh3244

  I'm building my own SOCKS5 client and HTTP library and am having trouble figuring out how things work with dynamic port forwarding. So far I can connect successfully with my SOCKS5 client, but from there on I am stuck. I am using the ssh -D command. Considering I have my local machine "home" and my server "server" and I wanted to use "server" as proxy for all connections I understand I would type ssh -D "localport" "serverhostname" on my local machine "home". This command I understand has ssh accept connections with the SOCKS5 protocol. So now if I want to connect to google.com(74.125.224.72:80) and issue a GET for the front page, I assume I would send the SOCKS5 client request and the server would respond back with a 0x00 "succeeded" and from then on I am connected and I would send the HTTP GET request and the server would respond back accordingly with the data. Now if I want to navigate to a different website, must I issue another SOCKS5 connection request for that sites IP/hostname? I'm confused if this is the way it is done, or if there is a program listening on the local port of the "server" and handling outgoing and incoming data. To reiterate: Do SOCKS5 proxies work by sending repeated SOCKS5 connection requests for different addresses or is there just one connection to a local port on "server" and another program on "server" handles the outgoing connection to the internet by using that local port to send and receive data to/from "home"?

  Read the article

• Quick way to bypass proxy with DownThemAll

  - by endolith

  I've been using an SSH proxy to my home network to encrypt my internet surfing, which is fine. But the connection is much slower than the direct one, and when I'm downloading large files I'd rather go around the proxy. Currently, I send it to Downthemall, go to FoxyProxy and disable the proxy, cancel and resume the download, then when it's started go back to FoxyProxy and re-enable it. Is there any way I can just get DownThemAll stuff to skip the foxyproxy?

  Read the article

• Web browsing through SSH tunnel gets stuck/clogged

  - by endolith

  I use tools like Tunnelier to log into my home Tomato router through SSH, and then use it as a proxy for web browsing, tunnel for Remote Desktop/VNC, etc. Most days it works great, but some days every page I try to view gets stuck, like the tunnel is clogged. I load a web page and it seems to be loading, then stops, with the little loading icon spinning and nothing happening. I refresh the page, I reboot the router, I reboot the other computers on my home network and turn off any bandwidth-hogging services on them, I've turned on QoS on the router to prioritize SSH. I don't understand what's getting stuck. Rebooting or disconnecting/reconnecting the SSH tunnel improves responsiveness for a minute, but then it gets clogged again. It also seems to help if I don't do anything on the tunnel for a few minutes, then it will be responsive for a bit and then get clogged again. Trying to open a terminal console from Tunnelier is also unresponsive, so it's not just a web browsing problem. Likewise, connecting to http://192.168.1.1 in the browser (to the router's web config through its own tunnel) is also slow/laggy/halting. The realtime bandwidth reported by the router is nowhere near my DSL connection's limits, though it does show big spikes during the laggy times, and the connection is responsive when it shows low bandwidths. How do I troubleshoot something like this?

  Read the article

• Configuring IE to resolve DNS at the proxy rather than locally.

  - by dankilman

  With the intention of tunneling web traffic through an SSH connection, the following has been done: I've manually configured a PAC file in IE7 in the LAN Settings dialog. I've verified that traffic is routed through my SSH tunnel that is setup for SOCKS5 dynamic port forwarding. I see that IE7 is always trying to resolve the name locally first. What I'm looking for is the ability to have the DNS name resolved at the proxy, rather than locally by the browser. There's a setting in Firefox that specifies DNS remote resolution, and Safari does it automatically. I've verified correct operation for these 2 other browsers. It would be nice if I could get IE to work also. This is for reference so you could understand where does the question originate from. Notice: The question was actually found by the help of google but with no answers available. Considering how it is exactly my question I figured I should just copy/paste over here because I don't think I could describe any better (there is a small introduction though).

  Read the article

• proxy RDP traffic through SOCKS5 proxy, using Windows

  - by ptrn

  I'm having bit of trouble. I have a server at school that's hosting a database. Normally I've been connecting to it through a VPN-connection, but earlier today it went down. I've checked with other people, and it's definitely down, so the fault's probably not at my end. Is there a way I can proxy RDP traffic through a SOCKS5 proxy?

  Read the article

• Tunneling traffic through a proxy using SSH - what does the proxy server see?

  - by nilu

  If I am accessing information (in a browser or via bittorent) through an SSH tunnel, what info will then be possible to obtain on the SSH/proxy server itself? As far as I have understood, the information between the proxy server and my computer is encrypted, but is it not possible for the SSH server admin to obtain info about the traffic? The SSH session requires my credentials, so my guess would be that the server admin would be able to obtain any information about my network usage.

  Read the article

• How do I check if a process (Firefox) has quit?

  - by Al_Jehle

  I am using Ubuntu 12.04 64-bit, with all updates installed. I made a simple shell script that starts a SOCKS5 tunnel and launches Firefox (with correct network proxy settings) to use the tunnel. How do I recognize when Firefox has ended (when I close it) so that I can close the tunnel? Also, it would be awesome if I could run this in the background, but not necessary. #!/bin/sh ssh -fCN -D 10000 server.com firefox //To lauch firefox using Ubuntu ? Code to determine when firefox has quit Code that kills the tunnel

  Read the article

• Socksifying a Java ServerSocket - how to approach

  - by Thorbjørn Ravn Andersen

  I would like to have a Java program running on network A have a ServerSocket living on another network B through a proxy. I have played with a SOCKS5 proxy (which works) but it appears that all the proxy facilities in Java only work with client connections, not with ServerSockets (no constructor taking a Proxy argument). Asking Google gives much hay and few needles. What is the approach I should take to get this running? If a specific client is better than a generic SOCKS or web proxy then fine, but it needs to be Java (that leaves sshd out). Target JVM is preferrably Java 5, and then Java 6.

  Read the article

• Python, implementing proxy support for a socket based application (not urllib2)

  - by Terry Felkrow

  Hey guys, I am little stumped: I have a simple messenger client program (pure python, sockets), and I wanted to add proxy support (http/s, socks), however I am a little confused on how to go about it. I am assuming that the connection on the socket level will be done to the proxy server, at which point the headers should contain a CONNECT + destination IP (of the chat server) and authentication, (if proxy requires so), however the rest is a little beyond me. How is the subsequent connection handled, specifically the reading/writing, etc... Are there any guides on proxy support implementation for socket based (tcp) programming in Python? Thank you

  Read the article

• OS X: How to force traffic through a specific SOCKS proxy on a per-app basis?

  - by GJ.

  I'm running a certain desktop app (actually via AIR if it makes any difference) which doesn't have any built-in proxy configuration settings. I need to get all traffic just from this app directed through a secure SOCKS proxy. This implies I can't use the global network preferences, as these would affect many other apps. Is there any way to force all network communication through a given SOCKS proxy on a per-app basis?

  Read the article

• How to secure Firefox traffic (+DNS) through SOCKS proxy under Ubuntu 10.04?

  - by Maarx

  I'm using Ubuntu 10.04, and starting a SOCKS proxy with 'ssh -D', and setting Ubuntu to use it with "System - Preferences - Network Proxy". Firefox uses the proxy, and the proxy's IP appears when I visit a site like http://www.whatismyip.com/. My question is, is Firefox resolving DNS requests through this proxy? Is my web-browsing truly secure? (That is, until I exit the other end of the proxy. I know it's insecure after that.) (And I've verified the keys, I'm not being man-in-the-middled) (And--screw it. You know what I mean. Is it resolving DNS requests through the proxy?) I don't know how I would go about verifying such a thing for myself. Using additional hardware such as another debugging proxy is not an option. If Firefox isn't resolving my DNS requests through the SOCKS proxy, how do I go about fixing it?

  Read the article

• How to route traffic through a specific SOCKS proxy on a per-app basis?

  - by GJ.

  I'm running a certain desktop app (actually via AIR if it makes any difference) which doesn't have any built-in proxy configuration settings. I need to get all traffic just from this app directed through a secure SOCKS proxy. This implies I can't use the global network preferences, as these would affect many other apps. Is there any way to force all network communication through a given SOCKS proxy on a per-app basis? It would also be helpful to know if there's a way to perform such routing globally, based on specific IP addresses (as this could allow for some reasonable workaround).

  Read the article

• Cocoa NSStream works with SSL, with socks5, but not at the same time

  - by Evan D

  Upon connecting (to an FTP, at first without SSL) I run: NSArray *objects = [NSArray arrayWithObjects:@"proxy.ip", [NSNumber numberWithInt:1080], NSStreamSOCKSProxyVersion5, @"user", @"pass", nil]; NSArray *keys = [NSArray arrayWithObjects:NSStreamSOCKSProxyHostKey, NSStreamSOCKSProxyPortKey, NSStreamSOCKSProxyVersionKey, NSStreamSOCKSProxyUserKey, NSStreamSOCKSProxyPasswordKey, nil]; NSDictionary *proxyDictionary = [NSDictionary dictionaryWithObjects:objects forKeys:keys]; [iStream retain]; [iStream setDelegate:self]; [iStream scheduleInRunLoop:[NSRunLoop currentRunLoop] forMode:NSDefaultRunLoopMode]; [iStream setProperty:proxyDictionary forKey:NSStreamSOCKSProxyConfigurationKey]; [iStream open]; same for iStream. This allows me to connect succesfully through a socks5 proxy. If I continue without setProperty:proxyDictionary... (socks5 disabled) I would tell the server to switch to SSL, and then successfully apply these settings to the in/output streams, thus giving me a SSL connection: NSMutableDictionary *settings = [NSMutableDictionary dictionaryWithCapacity:1]; [settings setObject:(NSString *)NSStreamSocketSecurityLevelTLSv1 forKey:(NSString *)kCFStreamSSLLevel]; // to allow selfsigned certificates: [settings setObject:[NSNumber numberWithBool:YES] forKey:(NSString *)kCFStreamSSLAllowsAnyRoot]; [iStream retain]; [iStream setDelegate:self]; [iStream scheduleInRunLoop:[NSRunLoop currentRunLoop] forMode:NSDefaultRunLoopMode]; CFReadStreamSetProperty((CFReadStreamRef)iStream, kCFStreamPropertySSLSettings, (CFTypeRef)settings); [iStream setProperty:NSStreamSocketSecurityLevelTLSv1 forKey:NSStreamSocketSecurityLevelKey]; same for oStream. All of which works fine if I disable socks5. If I turn it on (line 7 in the first snippit) I lose contact when applying the SSL settings. If I had to guess, I'd think it's losing some properties when applying (ssl) "settings"? Please help :) Evan

  Read the article

• send mail socks5

  - by 2xMax

  Hello, how to send e-mail via socks5 proxy in c#? Is threre a free solution?

  Read the article

• Strange IP address showing up with OS X ssh

  - by user50799

  I was futzing around with DTrace on Mac OS X and found the following script that prints out information about connections being established: $ cat script.d syscall::connect:entry { printf("execname: %s\n", execname); printf("pid: %d\n", pid); printf("sockfd: %d\n",arg0); socks = (struct sockaddr*)copyin(arg1, arg2); hport = (uint_t)socks->sa_data[0]; lport = (uint_t)socks->sa_data[1]; hport <<= 8; port = hport + lport; printf("Port number: %d\n", port); printf("IP address: %d.%d.%d.%d\n", socks->sa_data[2], socks->sa_data[3], socks->sa_data[4], socks->sa_data[5]); printf("======\n"); } I run it in one window: $ sudo dtrace -s ./script.d Then I ssh to another machine from another window. I get this output from my dtrace window: CPU ID FUNCTION:NAME 0 18696 connect:entry execname: ssh pid: 5446 sockfd: 3 Port number: 22 IP address: 192.168.0.207 ====== 0 18696 connect:entry execname: ssh pid: 5446 sockfd: 5 Port number: 12148 IP address: 109.112.47.108 ====== ^C The first IP address I can explain (192.168.0.207), that's the machine I'm connecting to. But what's with the 109.112.47.108 machine? It doesn't show up in tcpdump nor netstat -an Is there something with my dtrace code or my understanding of how the connect system call works?

  Read the article

< Previous Page | 1 2 3 4 5 6 7  | Next Page >