Search Results

Search found 1067 results on 43 pages for 'speakers'.

Page 3/43 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• No sound on laptop speakers on an Acer Aspire 6920

  - by snewix

  Computer: Acer Aspire 6920 Card: HDA Intel Chip: Realtek ALC889 My problem is that the laptop build-in speakers don't play any sound. When i plug in my headphones the sound works normally, the same goes with external speakers. Those work normally like the headphones. The profile in the Sound settings is Analog two-way Stereo. I am using Ubuntu 12.04. Might trere be any problem with my sound drivers or something similar? Any form of help appreciated.

  Read the article

• No audio with headphones, but audio works with integrated speakers

  - by Pedro

  My speakers work correctly, but when I plug in my headphones, they don't work. I am running Ubuntu 10.04. My audio card is Realtek ALC259 My laptop model is a HP G62t a10em In another thread someone fixed a similar issue (headphones work, speakers not) folowing this: sudo vi /etc/modprobe.d/alsa-base.conf (or some other editor instead of Vi) Append the following at the end of the file: alias snd-card-0 snd-hda-intel options snd-hda-intel model=auto Reboot but it doesnt work for me. Before making and changes to alsa, this was the output: alsamixer gives me this: Things I did: followed this HowTo but now no hardware seems to be present (before, there were 2 items listed): Now, alsamixer gives me this: alsamixer: relocation error: alsamixer: symbol snd_mixer_get_hctl, version ALSA_0.9 not defined in file libasound.so.2 with link time reference I guess there was and error in the alsa-driver install so I began reinstalling it. cd alsa-driver* //this works fine// sudo ./configure --with-cards=hda-intel --with-kernel=/usr/src/linux-headers-$(uname -r) //this works fine// sudo make //this doesn't work. see ouput error below// sudo make install Final lines of sudo make: hpetimer.c: In function ‘snd_hpet_open’: hpetimer.c:41: warning: implicit declaration of function ‘hpet_register’ hpetimer.c:44: warning: implicit declaration of function ‘hpet_control’ hpetimer.c:44: error: expected expression before ‘unsigned’ hpetimer.c: In function ‘snd_hpet_close’: hpetimer.c:51: warning: implicit declaration of function ‘hpet_unregister’ hpetimer.c:52: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c: In function ‘hpetimer_init’: hpetimer.c:88: error: ‘EINVAL’ undeclared (first use in this function) hpetimer.c:99: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c:100: error: invalid use of undefined type ‘struct hpet_task’ hpetimer.c: At top level: hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) hpetimer.c:121: error: extra brace group at end of initializer hpetimer.c:121: error: (near initialization for ‘__param_frequency’) hpetimer.c:121: warning: excess elements in struct initializer hpetimer.c:121: warning: (near initialization for ‘__param_frequency’) make[1]: *** [hpetimer.o] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.9/acore' make: *** [compile] Error 1 And then sudo make install gives me: rm -f /lib/modules/0.0.0/misc/snd*.*o /lib/modules/0.0.0/misc/persist.o /lib/modules/0.0.0/misc/isapnp.o make[1]: Entering directory `/usr/src/alsa/alsa-driver-1.0.9/acore' mkdir -p /lib/modules/0.0.0/misc cp snd-hpet.o snd-page-alloc.o snd-pcm.o snd-timer.o snd.o /lib/modules/0.0.0/misc cp: cannot stat `snd-hpet.o': No such file or directory cp: cannot stat `snd-page-alloc.o': No such file or directory cp: cannot stat `snd-pcm.o': No such file or directory cp: cannot stat `snd-timer.o': No such file or directory cp: cannot stat `snd.o': No such file or directory make[1]: *** [_modinst__] Error 1 make[1]: Leaving directory `/usr/src/alsa/alsa-driver-1.0.9/acore' make: *** [install-modules] Error 1 [SOLUTION] After screwing it all up, someone mentioned why not trying using the packages in Synaptic - so I did. I have reinstalled the following packages and rebooter: -alsa-hda-realtek-ignore-sku-dkms -alsa-modules-2.6.32-25-generic -alsa-source -alsa-utils -linux-backports-modules-alsa-lucid-generic -linux-backports-modules-alsa-lucid-generic-pae -linux-sound-base -(i think i listed them all) After rebooting, the audio worked, both in speakers and headphones. I have no idea which is the package that made my audio work, but it certainly was one of them. [/SOLUTION]

  Read the article

• Two different subwoofers aren't working on my machine or my phone

  - by Philluminati

  I have speakers that come with my computer. Two small desktop speakers and a subwoofer with a base volume control on the back. It's worked for years. I was listening to Spotify on my speakers as loud they would possibly go and with the base turned up to max and suddenly the subwoofer stopped working. I've plugged the speakers into my Android HTC Desire Z handset and again, the desktop speakers play music but the subwoofer doesn't (even after fiddling with the volume control). So I figured I'd broken it. I went to Amazon and bought a replacement one. I bought this one: http://www.amazon.co.uk/dp/B002N46YD8/ref=pe_217191_31005151_dp_1 but it doesn't work either, on either my desktop nor my Android phone. I had a play with alsamixer and the LFE and center controls are switched on and the speakers are okay... but still no base. Am I unlucky enough to bought a new subwoofer which is already broken out of the box or is there something else which is wrong and I could look into please? Are there any other tests which I could perform to see if the problem is me or not?

  Read the article

• Unable To Get Sound Working to External Speaker on HP TouchSmart 320 on 11.04 or 11.10

  - by Schof

  This is an HP TouchSmart 320, model number 320-1200m. I'm using Ubuntu 11.04. Hardware information: root@hp320:/home/mpower# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Generic [HD-Audio Generic], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 root@hp320:~$ cat /proc/asound/card0/codec#0 | grep Codec Codec: IDT 92HD91BXX Sound to headphone jack works properly, but sound to built-in speakers does not work. I have installed Windows, and with Windows 7 installed, all audio hardware works properly, so this isn't a hardware fault. I've looked at https://help.ubuntu.com/community/HdaIntelSoundHowto and have been unable to find my card in http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio-Models.txt . I have tried adding almost every conceivable model in the line "options snd-hda-intel model=MODEL" line I added to /etc/modprobe.d/alsa-base.conf. Update 2011-11-09 2:31 PM PST: I've gone to Control Center - Sound Preferences to attempt settings that make sound work. The "Hardware" tab shows one device: "Internal Audio 1 Output / 1 Input Analog Stereo Duplex." There are two output profiles listed in the selection box at the bottom of the tag: Analog Stereo Duplex and Analog Stereo Output. Neither cause sound to emit from the speakers. I've also run alsamixer on the command-line and ensured that everything is set to maximum and nothing is muted. Update 2011-11-09 5:15 PM PST: I've replicated the exact same symptoms in 11.10. Update 2011-11-10 11:31 AM PST: I've filed a bug in launchpad: https://launchpad.net/ubuntu/+source/alsa-driver/+bug/888703

  Read the article

• HP dv7 Beats Audio Subwoofer on while headphones plugged in

  - by msilis

  I have looked for answers to this but have not found anything. People have similar problems but mostly with getting the subwoofer to work at all. I got the subwoofer to work by editing the /etc/modprobe.d/alsa-base.conf file and adding options snd-hda-intel model=ref. When I plug in my headphones, the main speakers turn off but the subwoofer still has sound coming through it. The output is selected automatically in sound preferences and is set to headphones when they are plugged in. I also have tried muting the main speakers, which in turn mutes the subwoofer, before plugging in the headphones as they seem to have two different volume controls, but as soon as the headphones are plugged in, the subwoofer has sound coming out of it. I am running Ubuntu 11.10 64 bit on HP dv7- 4285dx. I am able to just not have the subwoofer on but since I have gotten it to work I would like to keep it around and not have to change a config file every time I want to plug in my headphones. Any ideas or suggestions would be greatly appreciated. Thanks

  Read the article

• Chicago Code Camp Call For Speakers

  - by Tim Murphy

  The Chicago Code Camp is coming up on May 1st, 2010.  They are still looking for speaker.  If you have a rock’n code demonstration that you would like to present to the community be sure to sign up.  If you know someone else who has some ideas that you really think they should share with the world guilt them in to signing up.  http://www.chicagocodecamp.com/ del.icio.us Tags: Chicago Code Camp,call for speakers

  Read the article

• Want to See the Future?

  - by Oracle Staff

  You won't need this to see what's happening in September. Let the new Oracle OpenWorld 2010, JavaOne, and Oracle Develop 2010 Content Catalog be your guide. You can quickly get information on more than 2,000 sessions and 400 partner exhibitors at the September conferences. Learn about speakers, demos, preconference programs, and much more. View the Content Catalog today. To register, visit the Oracle OpenWorld 2010 , JavaOne, and Oracle Develop 2010 Websites.

  Read the article

• DotNetNuke Connections 10 Speakers Announced

  Every year the speaker selection committee for DotNetNuke Connections (formerly known as DotNetNuke OpenForce Connections) has the difficult task of reviewing hundreds of submissions and finding the two dozen sessions that we feel will provide a good mix of topics for the conference. It is not an easy task as we always face the difficult decision to exclude some great speakers and equally great topics.More......Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• No Speaker sound on HP ProBook 6550b

  - by tUTe

  I have this problems since always, but never care, today i want to use only ubuntu, no more windows, so i installed ubuntu 14.04 and the speakers does not work (work fine on windows until yesterday) but the headphones jack works properly I try to check alsamixer, and everything is in 100, but if i check the sound devices only show me the headphones I do this link and does not work too, and i don't know what else i do

  Read the article

• I can't I hear sound from the speakers Ubuntu 13.04

  - by Quantum Jumping

  All works pretty good, I remember I didn't nothing unusual,just I installed a especific flash plugin to nuvola player, I can ear the sound with my headphones, but I can't I hear sound from the speakers. When I put in the terminal pulseaudio appears crash when trying to start the daemon I leave screenshot and in the System configuration in output play sound through is empty, in the past there appears 4 options I need reinstall pulseaudio??? Thanks in advance for the help

  Read the article

• SouthEast LinuxFest names speakers

  <b>LinuxDevices:</b> "The organizers of the 2010 SouthEast LinuxFest (SELF) have announced new speakers for their second annual event, to be held June 11-13 in Spartanburg, South Carolina"

  Read the article

• No sound (USB speakers) in Ubuntu 9.04 Jaunty Jackalope

  - by Mike

  I just installed Ubuntu 9.04 and have been unable to get sound functioning. I have a set of USB speakers (not USB powered with a stereo plug... they are totally USB). I've tried plugging them directly into the tower as well as into the USB port on my Dell 2405FPW monitor. Both USB ports are functioning correctly (I tested by sticking a flash drive in there - they both read it), and the speakers are functioning correctly in Windows. If it's relevant, I have an SB Audigy 2 sound card that came with the computer, but is not being used. Any ideas? Thanks! EDIT: These are the speakers - Logitech S-150 USB Speakers

  Read the article

• Why does my 5.1 surround work in testing only?

  - by Mike Pateras

  I've got a 5.1 speaker setup. In both this SoundMax utility (I think it came with my motherboard), and in the Windows 7 sound test, all 5.1 speakers work properly, but that's the only time that I can get audio to come out of the rear speakers and the center channel. When playing games, video, music, etc., I only seem to get 2.1 speakers worth of sound, even though I've configured everything for 5.1 surround sound. How can I get my 5.1 surround sound working during actual use?

  Read the article

• Why is my laptop only producing sound when the headphones should be active?

  - by Telos

  I think Skype may have corrupted my laptop speakers somehow. The other day I was listening to music on my headphones when a coworker started sending me IMs. Whenever the alert sound played, the music and alert would both come out through the laptop speakers for a second instead of the headphones. Now sound only comes out through the speakers when skype is playing sounds, or if I right click the volume control, select Playback Devices and test the headphones. So if I play music it's silent. If I go into Skype and dial the sound test call the music will start coming through the speakers. Any ideas how to fix this? Win7 by the way.

  Read the article

• USB Bose speakers with ubuntu 12.04

  - by Richard

  On a fresh install of ubuntu 12.04 my Bose USB weren't working at all. I read through a large number of posts here and elsewehre on Bose or USB speakers. I tried many things (modifying a number of different files, etc.). This worked... sort of: USB Audio on 0 volume on startup The AlsaMixer works after I turn up the volume, but the sound crackles a lot. Also, having to use a term mixer to change sound isn't ideal. Any other ideas? Thank you, Richard

  Read the article

• No sound from internal speaker but headphones OK

  - by Aris Boch

  The problem: The system won't play sound on the internal speaker of the laptop, but only on the headphone. When I put the headphone jack half in and fiddle around with it, then it'll play even on the internal speakers (the system apparently believes, that the headphone are in). What should I do? The technical data: Laptop modell Medion Erazer X6815 matatabisama@matatabisama-X6815:~/Downloads$ sudo aplay -l | egrep ^card card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog] card 0: PCH [HDA Intel PCH], device 1: ALC269VB Digital [ALC269VB Digital] card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Ubuntu 12.04 64 matatabisama@matatabisama-X6815:~/Downloads$ uname -a Linux matatabisama-X6815 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• How do I consistently activate USB speakers

  - by Andrew.Healy

  I have a pair of Ricco USB speakers. As these are external, I sought to use them with 11.10. They are recognised by 'aplay -l' and Pulseaudio- I have selected them, but, have to reset the volume, every time I log on. I can also only recieve feedback and sound from apps and programs- like Kaffeine- on this boosted volume- I cannot get System Sounds, like logon or logoff. I have tried the alsamixer install that used to work, to no effect. Is their an app that I should be trying or is this feat impossible ? I have tried to delete all the files in .pulse and rebooting or just deletion of the entire .purge directory, as Michael K suggested- neither work as the directory is automatically rewritten on reboot. Ideas?

  Read the article

• Oracle Speakers at QCon New York, June 18-20, 2012

  - by Bob Rhubart

  If you're attending the QCon Conference in NYC, June 18-20, 2012, you'll find several presenters from Oracle among the impressive roster of speakers. Among those sharing their expertise at the New York event: Arun Gupta: Java EE & GlassFish Guy, Oracle Presentation: Java EE 7 and HTML5: Developing for the Cloud Brian Oliver: Global Solutions Architect, Oracle Presentation: The Live Object Pattern Cameron Purdy: Vice President of Development, Oracle Presentation: How the 10 key lessons from Java and C++ history inform the Cloud Charlie Hunt: JVM Performance Lead Engineer, Oracle Presentation: Extreme Performance with Java Registration for the event is still open. According to the website, registering before June 1 will save you $300. If you snooze, you lose.

  Read the article

• USB Audio Device Loopback Through Speakers

  - by matto1990

  I have a USB turntable which when plugged in to my ubuntu 10.10 machine appears in the audio settings as an input device (USB PnP Audio Device Analog Stereo) like a microphone. What I'd like to be able to do it to have the sound for that audio device played back through the audio output (speaker or whatever). I'm not too worried if there's a slight delay between the audio coming in and it being played out through the speakers. As far as I'm aware this is refereed to as software loopback. I can achieve exactly what I want if I open Audacity, enable software loopback and press record. Obvious this isn't ideal as I don't really want it recording what I'm playing all the time. I know this is possible because of the Audacity example however I'd like to know if there's a way to do it without it recording. I've search around for a while for a piece of software that does this, however I couldn't get anything even close. Any help would be greatly appreciated.

  Read the article

• Cheap sound on speakers - Dell XPS L502X

  - by Rafael

  I have a new machine that comes with JBL 2.1 Speakers with Waves Maxx Audio 3. On Windows it sounds perfect, though in Ubuntu 12.04 I get cheap/sound with simple mp3 files. I have tried a few things on different blogs but no luck so far. Any ideas? aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: ALC665 Analog [ALC665 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 1: ALC665 Digital [ALC665 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: N700 [Logitech Speaker Lapdesk N700], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0

  Read the article

• Headset undetected when plugged in

  - by tough

  I have recently installed Ubuntu 12.04 in my machine which was running windows 7. I have been trying to configure the audio to work exactly as it used to work in Windows but never been able to do so. I have followed this link exactly. I am still not getting the required configuration. aslamixer command shows me with 5 adjustable controls as shown below Master "adjustable" Speaker "adjustable" PCM "adjustable" Front "adjustable" AND Beep "adjustable" Mic Jack Mic In or Lin In S/PDIF OO "in a box" S/PDIF D OO "in a box" S/PDIF P DIGITAL or Analog M It does not detect the headset jack when plugged in. I here mean to say that the sound form the speakers does not go off when I plug in my headset jack. How can I make this working. Some other googling also did not help. I am on Hp Pavilion DV7 machine. The chip is IDT 92HD75B3X5 and the card is HDA ATI SB.

  Read the article

• play sound from different applications on different output devices (speakers, headphones)

  - by Mike

  I want music (played e.g. via Audacious) to be played on speaker system, and all other sounds produced by other applications (including ubuntu sound effects) to be played on headphones. My computer has sound connectors at its back, and also connectors on its front panel. When I connect both headphones and speakers, only headphones work (I take it, the front connectors take precedence?). Should I purchase another sound card (in addition to the motherboard-integrated sound I have)? When I go to Audacious output settings, I see only the ouput plugin selection list, with PulseAudio selected and options like ALSA, OSS4 etc. But there's no facility to select particular output device (and I guess it wouldn't magically appear even if I had the second soundcard). Is this at all possible to bind specific application to particular output device?

  Read the article

• Sound issue in Lubuntu

  - by jvsa90

  I'm recently having a problem in my Lubuntu deskptop: sound through the speakers doesn't seem to work. The funny thing is: it works when I plug in my earphones. I've tried to unmute everything with pavucontrol and alsamixer, but everything seems to be OK. $ sudo aplay -l **** Liste der Hardware-Geräte (PLAYBACK) **** Karte 0: Intel [HDA Intel], Gerät 0: HDA Generic [HDA Generic] Sub-Geräte: 0/1 Sub-Gerät #0: subdevice #0 $ lspci -v | grep -A7 -i "audio" 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: Acer Incorporated [ALI] Device 034a Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 58200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel Can anyone guess what's happening? It has worked until recently and it definitely works in my Windows partition.

  Read the article

• Constant noise in speakers and headphones

  - by user103978

  On my laptop, Samsung 300V5A-S19 I have the constant noise from the speakers. If I wear headphones, the sound becomes more pronounced (at half volume it mutes the music). The noise level is independent of the volume control. The noise disappears only when volume is completely muted. For the record, the sound is reminiscent of the noise of the waves or something like that. System information: Ubuntu 12.10, kernel 3.5.0-18 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) All packages in the system updated. PS: Following the advice from this message (click) yielded no result.

  Read the article

• System speakers not recognized

  - by Kyle Maxwell

  Since upgrading to Xubuntu 13.10, sound has not functioned properly (e.g. screeching when playing Skype notifications). Now, however, it does not function at all. pavucontrol only shows Dummy Output and does not recognize the built-in speakers on my Dell Precision M4600. Possibly related, the sound indicator applet does not come up when I click on it, only showing a small white bar underneath it. I have purged and reinstalled pulseaudio. lspci -v shows: 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) Subsystem: Dell Precision M4600 Flags: bus master, fast devsel, latency 0, IRQ 56 Memory at f2560000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 14a3 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0080000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel The "Capabilities: <access denied" line makes me wonder if there's a permissions issue, as the Log Out applet now shows "Restart" and "Shutdown" grayed out. groups shows me in: kmaxwell adm dialout cdrom sudo dip plugdev fuse lpadmin netdev sambashare vboxusers

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >