Search Results

Search found 102 results on 5 pages for 'videocard'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 3/5 | < Previous Page | 1 2 3 4 5  | Next Page >

  • Power supply issue? New Radeon5850's fan runs at full speed and PC doesn't boot.

    - by Kris
    I recently bought a new ASUS EAH5850 graphics board. I installed it a custom PC which had an ASUS p5n-e SLI mobo along with a 500w Thermaltake W0093RU power supply. Sometimes when doing a cold boot the 5850's fan will run at full speed and the PC will not boot. Powering off by holding down the power button and powering back on sometimes remedies the situation and everything boots normally. Warm reboots also never seem to have problems. For some reason though cold boots almost always do. Another issue I notice is that when the PC does boot normally it takes longer (+30 secs) to POST than with my last video card. I flashed the mobo with the latest available BIOS but it had no effect. Is my problem a power issue or incompatible motherboard or something else I'm missing?

    Read the article

  • New video card? [closed]

    - by TutorialPoint
    I ran into some problems with my ATI Radeon x1200. I want it to support vertex shader 3.0, but it only does 2.0. This is because Call of Duty: Modern Warfare 2 only works with 3.0. So, I want a new video card. Can someone help me, with a more clean look to it? I bet if I would stick to some seller, I would end up with a video card that does not support what I want, or is too expansive. I really do not want it to be above $75, if possible. Some info about my PC: Manufacter: XXODD Processor: AMD Athlon64 X2 DualCore 4000+ 2Ghz (but running currently 32 bit OS) ATI Radeon X1200 video card (the problem) 1 GB RAM DDR2 MS-7367 Motherboard Windows 7 Ultimate OS 32-Bit Build 7600 RTM

    Read the article

  • Having to Toggle Between Two Sets of Video Drivers

    - by Maarx
    So, I've got a Win7 64-bit gaming PC with GTX 260's. Recently, StarCraft 2 had an issue with flickering, which NVidia fixed with a new set of drivers. However, these new drivers induce unplayable graphical errors with Neverwinter Nights 2, something me and my friends still play from time to time. I am seeking advice on the "best" way to rectify this situation, to be able to switch between two driver releases, without compromising the stability of my system (if Windows stability isn't an oxymoron). I'm wondering if Windows 7 is structured in such a way that I can constantly reinstall these two sets of drivers back and forth overtop each other, possibly six or eight times a day, without very quickly driving myself to reformat to maintain that "just like new" performance. I'm loathe to have to reformat the drive and maintain two copies of the operating system, but I'll do it if I have to.

    Read the article

  • How can I use a DVI splitter cable on 1 DVI port?

    - by samoz
    I have a GTX 275 video card with 2 DVI ports. I already run 2 monitors, but I've seen cables that plug into one DVI port and split into 2 more connectors. Is there some special trick to getting this to work with my card so I could have up to 4 monitors running? I don't really want to buy the adapter until I know that it will work (or not work as it may be).

    Read the article

  • Is it possable to invert the image output on a computer for a rear projection screen?

    - by Faken
    Hello everyone, Is there a way to flip/invert/mirror a video out on a computer with a on board Intel video card? I'm making a large rear projection screen and i need to invert the image to project properly. One of my projectors has a function that automatically inverts the image, but the other one may or may not (likely not) and i need two projectors to drive the system so I'm hoping to do the inversion on the computer side before projecting.

    Read the article

  • Is NVIDIA GeForce GTX 480 Video Card Compatbile with a Mac Pro Running Windows 7 Pro 64?

    - by aquat33nfan
    I have a Mac Pro (early 2008) and I'm running Windows 7 Pro (64 bit) natively (i.e., with just Windows installed and no OSX or boot camp) on it. If I buy an NVIDIA GeForce GTX 480 video card, will it work or do I have to buy a card that is Mac-specific (e.g., GeForce GTX 285 'for Mac')? Also, more generally, will Windows video cards work on Intel Macs running Windows (in case I pick a cheaper card)? I can't tell if it matters that a Mac does not have a bios. I searched other boards and I gathered that video cards would work fine because Windows has the proper drivers for them and OSX doesn't and not having the BIOS doesn't make a difference. I found one thread on here that seemed to indicate that as well, but I wanted to make sure. Thanks.

    Read the article

  • Video card recommendation?

    - by user26453
    These are my requirements: Can support latest DirectX/OpenGL standards Dual DVI output required Less than $100 Does not need to excel at gaming Does need to provide hardware acceleration for Windows 7 and Visual Studio 2010 via WPF. Bonus points: Supported in OSx86 land. Quiet and low power. I tend to lean towards nvidia because I'm used to their drivers and their software (nview, etc.)

    Read the article

  • Will Windows Barf on Constant Video Driver Overwrite?

    - by Maarx
    So, I've got a Win7 64-bit gaming PC with GTX 260's. Recently, StarCraft 2 had an issue with flickering, which NVidia fixed with a new set of drivers. However, these new drivers induce unplayable graphical errors with Neverwinter Nights 2, something me and my friends still play from time to time. I am seeking advice on the "best" way to rectify this situation, to be able to switch between two driver releases, without compromising the stability of my system (if Windows stability isn't an oxymoron). I'm wondering if Windows 7 is structured in such a way that I can constantly reinstall these two sets of drivers back and forth overtop each other, possibly six or eight times a day, without very quickly driving myself to reformat to maintain that "just like new" performance. I'm loathe to have to reformat the drive and maintain two copies of the operating system, but I'll do it if I have to.

    Read the article

  • Ubuntu 9.10 freezes when HDMI port is connected

    - by Felipe Hummel
    Hi, I have a Sony Vaio FW350 with a HDMI output. I'm trying to use it under Ubuntu 9.10 with a LG LCD monitor 21,5'. I've tried two approaches: Boot the laptop with the HDMI cable connected and monitor turned on. Result: LCD Monitor keeps turned on but the whole screen is black and Ubuntu do not seem to be initializing. Boot Ubuntu until the end. I then connect the HDMI cable into the Laptop. The mouse and the whole system freezes. In both cases the only way to turn off the laptop is holding the power button. I've looked around the internet for similar problems, but only found workarounds for the same problem with VGA input, not HDMI. I also tried to use metacity before connecting the cable, but still got the same result. Any hints?

    Read the article

  • Windows 7: from Geforce 8800 to three monitors?

    - by lance
    I've got a GeForce 8800 that I've quite happy with. It drives my two 23" widescreen displays well. Now I've got a 19" standard display that I want to stick between the two widescreens. My second PCIe 16x slot is unused (as is the PCI slot below that), and I want to add a card to my Win7 x64 system. This 19" display won't be used for gaming, so I don't need anything fancy. Here are two cards I was considering, but I'm wondering if they're bad choices for some reason? If they're both fine choices, which is better and why? Again, I'm needing to power only the 19" standard display with this card, and it won't play games. I just need 1280x1024 in Win7 x64. NVidia: Galaxy 95TFE8HUFEXX GeForce 9500 GT Video Card - 512MB DDR2, PCI Express 2.0 ATI: ASUS EAH4350 SILENT/DI/51 Radeon HD 4350 Video Card - 512MB DDR2, PCI Express 2.0

    Read the article

  • ATI Radeon 5670 Won't Show Resolutions over 1400x900

    - by Phil Sandler
    Just got my new Dell computer with Windows 7 and an ATI Radeon 5670. I attached it to my current monitor, which is a Samsung 24" (2443bwt). Windows 7 does not allow me to display in resolutions greater than 1400 x 900. The setup through a VGA cable into the VGA port of the card. The card also has a DVI port, but I need to use the VGA port because a KVM that supports VGA only. My old PC (which is Windows XP, GeForce 8600 video) can display in 1900 x 1200 on the same monitor (which is what I want) and even higher. It does this through a vga cable also connected to the KVM (through the DVI port but using an adapter). I have tried the same setup (DVI = VGA adapter) on the new PC and nothing changed. I have tried: Updating the drivers via Windows "Update Driver" (says they are current) Installing the updated version of the drivers from ATI (made no difference) Installing Powerstrip (all the options I would need for a custom resolution are greyed out) Installing the drivers/software from ATI caused the ATI Catalyst Control Center software to stop functioning, so I can no longer even start it. I have found some references to other people having this problem and instructions on cleaning the software off and reinstalling it (as uninstalling normally doesn't solve it). I will try this tonight. In any case, I didn't see any options in CCC that would allow me to override the settings for max resolution. However I didn't tinker with it too much before I tried updating the drivers, so I may have missed a setting. I contacted Samsung via online chat and they say it's a problem with the video card/driver (of course--what else would they say?). Any thoughts on what else I could try?

    Read the article

  • Problem with Ubuntu 10.04 and ATI

    - by Maximilinao
    I'm having a problem installing the drivers from the video card. Just finished installing the driver, reboot my OS, and my monitor is starting off in energy saving mode and does not boot Ubuntu. What I can do? Sorry for my English. I used the Google translator.

    Read the article

  • Maximum number of monitors Win 7 Supports?

    - by cpuguru
    I want to set up a system with (9) monitors arranged in a 3x3 grid. Is this configuration possible with Windows 7? Does it max out at a set number of monitors? Any suggestions about known working hardware combinations would be much appreciated. Currently considering (3) nVidia Quadro NVS420 cards to drive the array.

    Read the article

  • How to set up multiple video cards in Windows XP

    - by Swish
    All I am trying to do is run a three monitor setup, two widescreens on the good card at high res and a third smaller monitor at 1024x768 that I watch continuously updating info in. I have a Dell Vostro 200 with an HIS Radeon HD 4670 video card in the PCI-e slot. I need an additional video card that will work in an available PCI slot. I Had a Nvidia GeForce 5200 that was installed but due to what I'm assuming was a compatible driver issue (because it was Nvidia not ATI) it wouldn't run at more than 640x480 4bit color when installed simultaneously with the HIS card. Previously I used the Nvidia with the onboard Intel video to run a third monitor, but now that the HSI uses PCI-e the onboard has to be disabled. I tried a Radeon 9200 PCI card that I found (microsoft made I think) with it and only that or the HIS card could be enabled at the same time. When both were in the HIS card said "The device cannot start". SO, based on the fact that I got the Nvidia to work (although very poorly) with the new HIS Radeon HD 4670 PCI-e I know it's possible, just don't know what type of card I need to use. Any ideas?

    Read the article

  • What could cause a dual-monitor PC to suddenly stop using one of the screens?

    - by raldi
    I've got a dual-monitor setup using a GeForce 7900GT that was working fine for over a year... then suddenly, only one of the screens works. It's not OS-related, because even on startup, only one screen displays the BIOS checks. In the past, both screens would show it together. I didn't change anything to trigger this The monitor that gets a signal is random -- sometimes the one on the left goes black, sometimes the one on the right. The monitors and their cables are good -- I can switch both or either, and I get a signal just fine. They're plugged in, too. It's not the video card, either -- I have an identical 7900GT in another machine, and swapping the two didn't fix anything. It's not dust on the motherboard -- I pulled everything out, cleaned it off, checked for obvious damage, put it all back together, and no change. My next two steps are going to be to reset the CMOS info and to try swapping out the motherboard. Before I do that, does anyone have any other ideas?

    Read the article

  • DVI vs HDMI graphics card output

    - by Shack
    Asking on behalf of someone: I want to buy a new graphics card but do not know which would be best in terms of output, DVI or HDMI, the sound part of the HDMI is not really required, I just need something to go to my new 32 inch hd tv. It accepts both DVI and HDMI. I only need it for basic gaming but mostly as a media center to watch movies and tv shows on. Also for windows media center's TV application, I need a tv card, should I get a graphics card with bult in tv card, or a usb dongle??

    Read the article

  • I need an other videocard to replace my ATI HD 5870 which one is good? [closed]

    - by Chris
    At this moment I have a ATI HD 5870 iCooler 5 and I game a lot. I want to replace the card for another, I don't have room in my case to add another 5870. I mainly play games like Battlefield 3, but I can't play this game on Ultra high, for me is this pretty important. So here are my questions: Price is not an issue because computers are a big hobby to me and hobbies cost money :-) Can anyone recommend me a better card, ATI or Nvidia does not mather to me. Why is this card better?

    Read the article

  • How to enable vga switcheroo on an Asus U41S?

    - by Nikita Shiman
    I have Asus U41S notebook with 2 wideocards, Intel HD Graphics 3000 and GeForce GT540M. I want to turn off the GF videocard, and work only with Intel. On the internet I found out how to do this with vga_switcheroo : lspci | grep VGA to see what number have my videocards cat /sys/kernel/debug/vgaswitcheroo/switch to see what for videocard is active but terminal says that it can't find locations of /vgaswitcheroo/switch. What must I do?

    Read the article

  • Clonezilla , NLite and PCs with different hardware specs..

    - by r2b2
    Hi, I used Clonezilla to create and restore images from a master computer to other workstations with the same specs. But the problem now is there are new computers whose hardware specs are different than the ones I maintained (mostly the videocard is different). Is it possible to create a customize Windows XP installer using Nlite and integrate all potential videocard and motherboard drivers ? If I then used this NLite ISO to install to a master computer which i will later clone and restore the image to other workstations, will windows xp still pick up the correct driver set? During XP installation, does the installer transfers all the drivers to the computer's harddisk? Thanks! Ryan

    Read the article

  • Clonezilla , NLite and PCs with different hardware specs

    - by r2b2
    I used Clonezilla to create and restore images from a master computer to other workstations with the same specs. But the problem now is there are new computers whose hardware specs are different than the ones I maintained (mostly the videocard is different). Is it possible to create a customize Windows XP installer using Nlite and integrate all potential videocard and motherboard drivers ? If I then used this NLite ISO to install to a master computer which i will later clone and restore the image to other workstations, will windows xp still pick up the correct driver set? During XP installation, does the installer transfers all the drivers to the computer's harddisk? Thanks! Ryan

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 1 2 3 4 5  | Next Page >