Search Results

Search found 442 results on 18 pages for 'william chambers'.

Page 3/18 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Sound through HDMI with the NVIDIA drivers

    - by William
    I am running a media center setup with the display through HDMI, powered by a NVIDIA card. I am using the proprietary NVIDIA drivers availabler through the additional drivers utility, on Xubuntu 11.10. In the mixer, I have all the volumes unmuted and turned up to 100%, but no sound through the HDMI. If I plug in speakers the nd comes through just fine. What can I do to make the sound go through the HDMI and to the TV?

    Read the article

  • Wireless connection disconnects and reconnects with a Netgear WNA1000

    - by William Berkenkamp
    Ever since I made the permanent switch from Vista to Ubuntu i've had wireless connectivity problems. From watching the network manager when it disconnects it seems like it turns off the receiver for some reason. Could it be bad drivers? I used their install software and the site doesn't really offer driver downloads. The adapter is a Netgear WNA1000 if memory serves, and I don't know much about the router except that it's a Motorola Surfboard. And I figure this might help a bit *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: 00:1b:b9:a7:39:a4 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:40 ioport:d800(size=256) memory:feaff000-feafffff memory:feac0000-feadffff *-network description: Wireless interface physical id: 1 bus info: usb@2:1.1 logical name: wlan0 serial: 00:26:f2:8b:fb:38 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.2.0-24-generic-pae firmware=1.9.4 ip=10.0.0.36 link=yes multicast=yes wireless=IEEE 802.11bgn I have tried installing WICD and it didn't fix the problem. Any help would be greatly appreciated. This problem is greatly limiting what I can do with my computer.

    Read the article

  • Does this factory method pattern example violate open-close?

    - by William
    In Head-First Design Patterns, they use a pizza shop example to demonstrate the factory method pattern. public abstract class PizzaStore { public Pizza orderPizza(String type) { Pizza pizza; pizza = createPizza(type); pizza.prepare(); pizza.bake(); pizza.cut(); pizza.box(); return pizza; } abstract Pizza createPizza(String type) } public class NYPizzaStore extends PizzaStore { Pizza createPizza(String item) { if (item.equals("cheese") { return new NYStyleCheesePizza(); } else if (item.equals("veggie")) { return new NYStyleVeggiePizza(); } else if (item.equals("clam")) { return new NYStyleClamPizza(); } else if (item.equals("pepperoni")) { return new NYStylePepperioniPizza(); } else return null; } } I don't understand how this pattern is not violating open-close. What if we require a beef Pizza, then we must edit the if statement in the NYPizzaStore class.

    Read the article

  • Message "Getting information" don't close

    - by William
    I have Windows 7 x64 I installed this software and I have a problem. I like Ubuntu but I feel the softwares related Linux often have problems. We each time need to seek to resolve the malfunctions. my problem is , I am getting a message as Getting information, please wait and it don't disappear. My firewall is completely deactivate and I already go to the UAC or the firewall to allow the "exe" of the Ubuntu One software in the settings. Nothing runs.Linux never run at the first time. I'm really disappointed and discouraged. Please help me. Thank you for your answers... Ps : I have Windows 7 64 bits

    Read the article

  • Windows gets progressively slower over time, why doesn't Ubuntu?

    - by William
    I, and many other previous Windows users notice that the computer seems to get progressively slower over time. I bought a leapfrog crammer only to find it installed process that sat there waiting for me to plug the crammer in so it could run the software. It took up three percent of the CPU twenty-four seven, seven day a week! This is one of the main reasons I left Windows. But, Ubuntu doesn't seem to slow down over time at all. Does Ubuntu allow programs to install background programs like the leapfrog crammer did to sit there like a leech and suck away at resources? Could someone explain why Windows tends to get slower over time, and is Ubuntu vulnrable to this too? Thanks for any help, this is puzzling me.

    Read the article

  • How'd they do it: Millions of tiles in Terraria

    - by William 'MindWorX' Mariager
    I've been working up a game engine similar to Terraria, mostly as a challenge, and while I've figured out most of it, I can't really seem to wrap my head around how they handle the millions of interactable/harvestable tiles the game has at one time. Creating around 500.000 tiles, that is 1/20th of what's possible in Terraria, in my engine causes the frame-rate to drop from 60 to around 20, even tho I'm still only rendering the tiles in view. Mind you, I'm not doing anything with the tiles, only keeping them in memory. Update: Code added to show how I do things. This is part of a class, which handles the tiles and draws them. I'm guessing the culprit is the "foreach" part, which iterates everything, even empty indexes. ... public void Draw(SpriteBatch spriteBatch, GameTime gameTime) { foreach (Tile tile in this.Tiles) { if (tile != null) { if (tile.Position.X < -this.Offset.X + 32) continue; if (tile.Position.X > -this.Offset.X + 1024 - 48) continue; if (tile.Position.Y < -this.Offset.Y + 32) continue; if (tile.Position.Y > -this.Offset.Y + 768 - 48) continue; tile.Draw(spriteBatch, gameTime); } } } ... Also here is the Tile.Draw method, which could also do with an update, as each Tile uses four calls to the SpriteBatch.Draw method. This is part of my autotiling system, which means drawing each corner depending on neighboring tiles. texture_* are Rectangles, are set once at level creation, not each update. ... public virtual void Draw(SpriteBatch spriteBatch, GameTime gameTime) { if (this.type == TileType.TileSet) { spriteBatch.Draw(this.texture, this.realm.Offset + this.Position, texture_tl, this.BlendColor); spriteBatch.Draw(this.texture, this.realm.Offset + this.Position + new Vector2(8, 0), texture_tr, this.BlendColor); spriteBatch.Draw(this.texture, this.realm.Offset + this.Position + new Vector2(0, 8), texture_bl, this.BlendColor); spriteBatch.Draw(this.texture, this.realm.Offset + this.Position + new Vector2(8, 8), texture_br, this.BlendColor); } } ... Any critique or suggestions to my code is welcome. Update: Solution added. Here's the final Level.Draw method. The Level.TileAt method simply checks the inputted values, to avoid OutOfRange exceptions. ... public void Draw(SpriteBatch spriteBatch, GameTime gameTime) { Int32 startx = (Int32)Math.Floor((-this.Offset.X - 32) / 16); Int32 endx = (Int32)Math.Ceiling((-this.Offset.X + 1024 + 32) / 16); Int32 starty = (Int32)Math.Floor((-this.Offset.Y - 32) / 16); Int32 endy = (Int32)Math.Ceiling((-this.Offset.Y + 768 + 32) / 16); for (Int32 x = startx; x < endx; x += 1) { for (Int32 y = starty; y < endy; y += 1) { Tile tile = this.TileAt(x, y); if (tile != null) tile.Draw(spriteBatch, gameTime); } } } ...

    Read the article

  • Long 'Wait' Time for three php/CSS files. Is something blocking them?

    - by William Pitcher
    I have been speed optimizing a Wordpress site to little effect. There are three files CSS-related php files from the Wordpress theme that are delaying page loads on the site. One of the three files is basically one line of custom CSS from the custom CSS feature in the theme. You can see what I am talking about with this Pingdom speed test: The yellow is 'Wait'. There are no slow items in the cut-off portion of the image. The full results are here: Pingdom Results Page 1. Any thoughts on what might be causing this? I understand that I have blocking CSS or JS files, but I don't see anything that would be causing that long of a wait. When I ran the P3 Plugin Profiler, Wordpress and all plugins appeared fine -- it is the theme that is taking all the time. GTmetrix recommends avoiding dynamic queries. I assume all the ver=3.61 references are to the version of Wordpress (which I am using). I noticed that my Wordpress sites using other themes don't make this query (at least not over and over). 2. Is this typical coding practice? 3. How much negative impact do these query-strings have -- a little or a lot? I tried searching for similar questions here, please excuse me if I missed something. Sometimes, I know just enough to be dangerous.

    Read the article

  • Am I violating LSP if the condition can be checked?

    - by William
    This base class for some shapes I have in my game looks like this. Some of the shapes can be resized, some of them can not. private Shape shape; public virtual void SetSizeOfShape(int x, int y) { if (CanResize()){ shape.Width = x; shape.Height = y; } else { throw new Exception("You cannot resize this shape"); } } public virtual bool CanResize() { return true; } In a sub class of a shape that I don't ever want to resize I am overriding the CanResize() method so a piece of client code can check before calling the SetSizeOfShape() method. public override bool CanResize() { return false; } Here's how it might look in my client code: public void DoSomething(Shape s) { if(s.CanResize()){ s.SetSizeOfShape(50, 70); } } Is this violating LSP?

    Read the article

  • Problem using python QPID and gevent together [closed]

    - by William Payne
    I have a python script that pulls messages from an Apache QPID queue, and then uses gevent to perform (IO-bound) tasks on those messages in parallel. The queue that this script pulls from was recently changed: I suspect the version of the C++ QPID broker changed, although I cannot verify this at the present time. Now, my process deadlocks and hangs upon QPID queue creation. I strongly suspect that this is a result of an incompatibility with gevent, although I have not done the work yet to produce a minimal example to demonstrate the problem. (Next on my list). Does anybody else have experience of getting gevent and QPID to work together? or Has anybody else seen the same issues?

    Read the article

  • How do I install VirtualBox 4.1?

    - by William
    How to install virtualbox-4.1.4 in ubuntu 11.04 fluently? when apt-get install libqt* unmet dependency. there is a long list of unmet dependency. Where start first and any command to install virtualbox fluently? You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: virtualbox-4.1 : Depends: libcurl3 (>= 7.16.2-1) but it is not going to be installed Depends: libqt4-network (>= 4:4.5.3) but it is not going to be installed Depends: libqt4-opengl (>= 4:4.7.0~rc1) but it is not going to be installed Depends: libqtcore4 (>= 4:4.7.0~beta1) but it is not going to be installed Depends: libqtgui4 (>= 4:4.7.0~beta1) but it is not going to be installed Recommends: libsdl-ttf2.0-0 but it is not going to be installed Recommends: dkms but it is not going to be installed Recommends: libhal1 (>= 0.5) but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).

    Read the article

  • Leapfrog Crammer won't mount as a USB flash drive

    - by William
    I can't seem to get the Leapfrog Crammer study and sound system to show up as a flash drive under ubuntu so I can transfer stuff to it. I don't want to install the leapfrog bloatware, can someone help me with this? Additional Information: When I plug my crammer into my computer it shows a 1 MB file system with a link to download the crammer software. I want to know how to access the rest of the crammer's file system so I can transfer music to it. The crammer does not show any other partitions in natulius. According to an article on the internet, the crammed is divided into three partitions: One with a link to install the crammer software, one with all content(music, flash cards, etc.) and one for firmware. I want to know how to access the one with the content so I can add music to the player. Can anyone help me with this? Thanks in advance.

    Read the article

  • transfer Thunderbird (17) Profile on Win7 to Ubuntu 12.04

    - by William Curran
    I want to transfer Thunderbird Profile on Win7 to thunderbird (17) Ubuntu 12.04. I already copied the profile folder from Windows to Ubuntu and modified progile.ini on the ubuntu machine to include [Profile] Name=Bill IsRelative=1 Path=(the name of the transfered profile folder) I think the problem is that the Win. TB profile content (files and folder structure) look VERY different that the that of the unbuntu TB profile's that was created on installation. The Ubuntu install is new where as the Win TB has undergone many updates. Seems the system for profile storage has changed drastically. I tried to start TB in safe mode but could't get the path correct to start TB in the terminal with the -safe-mode switch. What can I do? Bill

    Read the article

  • Should I install ia32-libs or lib32stdc++ or can I just use --force-all for 32-bit printer driver

    - by William
    I got a Brother printer MFC class. The brother website only provides 32-bit drivers but I installed 64-bit Ubuntu. It says I need to install "ia32-libs" or "lib32stdc++" to install the 32-bit drivers onto 64-bit Ubuntu. Elsewhere I've read that I don't need to install these packages, I can just use --force-all when installing, but I don't know of the accuracy of this information. My questions: 1) do I HAVE to install "ia32-libs" or "lib32stdc++" or can I use --force-all to make 32-bit drivers install on 64-bit ubuntu? 2) if I do have to install "ia32-libs" or "lib32stdc++", which should I install? Which is better, which is recommended by ubuntu experts?

    Read the article

  • How to install ubuntu 12.04

    - by William A. Jordan
    I've had ubuntu on my pc for about 5 years,after the new 12.04 version and a day and a half trying to get it to just boot up. I will take it off my pc and rely on windows. I have 5 pc's which I built and am not an amateur, After installing it numerous times and even to run it from your webpage (to no avail). Granted I do have nvidia drivers on it, but after I went to their webpage and downloaded and installed the linux driver it,it still would not boot, by the way I took 2 different pc's apart and used what I thought were compatible (I shouldn't have to do this) parts. I have it on a seperate hd which I will remove and format. Have a nice day and so long (2 much trouble).

    Read the article

  • Xubuntu and other Debian based distros slow

    - by William V
    I have a Compaq Presario SR1950NX desktop computer with the AMD64 3800+ processor and 1GB ram and it seems that Ubunutu, Xubuntu and Lubuntu are all laggy. Things seem to be slow such as clicking on menus and opening programs and the UI renders in peices. When using the browser the system slows down considerably. I ran the TOP command and I do notice that xorg hits 30 to 40 percent cpu when running the browsers. I have tried these distros on a spare P4 machine and it is even worse. As long as I don't have a several things open at one time I can manage to get around although sluggishly. I also notice that I can't get debian based distros to install in 64bit (crtc6 failure) only in 32bit. Can anyone tell me what is it that I might be doing wrong? I have an integrated Nvidia card and have tried several of the recommended drivers which sometimes result in no boot screen upon reboot. Thanks

    Read the article

  • App not showing up in Google Play search on app name [on hold]

    - by William Jockusch
    About 30 hours ago, I released an app on Google Play. I am concerned that if you search on the exact app name, it does not show up in the results, even if you click "show more". https://play.google.com/store/search?q=free+graphing+calculator&c=apps It does show up if you put the name in quotes. But that's awfully low discoverability. https://play.google.com/store/search?q=%22free%20graphing%20calculator%22&c=apps Possibly relevant information: I had an earlier version with a different bundle ID. It was up for just an hour or so, and probably never actually visible to users. How can I fix this?

    Read the article

  • Error after second spec run with rspec and autospec

    - by Sean Chambers
    After installing rspec/ZenTest and running autospec, it runs my specs the first time as expected. After making a change to one of my specs and upon running the second time I get the following results: /usr/bin/ruby1.8 /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/bin/spec --autospec /home/schambers/Projects/notebook/spec/models/user_spec.rb -O spec/spec.opts /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/formatter/progress_bar_formatter.rb:17:in `flush': Broken pipe (Errno::EPIPE) from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/formatter/progress_bar_formatter.rb:17:in `example_passed' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/reporter.rb:136:in `example_passed' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/reporter.rb:136:in `each' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/reporter.rb:136:in `example_passed' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/reporter.rb:31:in `example_finished' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/example/example_methods.rb:55:in `execute' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/example/example_group_methods.rb:214:in `run_examples' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/example/example_group_methods.rb:212:in `each' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/example/example_group_methods.rb:212:in `run_examples' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/example/example_group_methods.rb:103:in `run' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/example_group_runner.rb:23:in `run' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/example_group_runner.rb:22:in `each' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/example_group_runner.rb:22:in `run' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/options.rb:152:in `run_examples' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/lib/spec/runner/command_line.rb:9:in `run' from /usr/lib/ruby/gems/1.8/gems/rspec-1.3.0/bin/spec:5 Has anyone run into this or know what the heck is going on here? Thanks

    Read the article

  • How to use bundler gem binaries in path

    - by Sean Chambers
    I just started using bundler for gem packaging in vendor/. The problem is with certain gems (like rspec and cucumber) that have binaries. The binary path that is under my_app/vendor/gems/ruby/1.8/...cucumber-0.6.2/bin/ is not in my path, therefore when I go to run cucumber i get command cannot be found. What is the easiest way to execute the bundled gem binaries from within the app rather than adding a large number of folders to my path? Thanks

    Read the article

  • File Uploads with Turbogears 2

    - by William Chambers
    I've been trying to work out the 'best practices' way to manage file uploads with Turbogears 2 and have thus far not really found any examples. I've figured out a way to actually upload the file, but I'm not sure how reliable it us. Also, what would be a good way to get the uploaded files name? file = request.POST['file'] permanent_file = open(os.path.join(asset_dirname, file.filename.lstrip(os.sep)), 'w') shutil.copyfileobj(file.file, permanent_file) file.file.close() this_file = self.request.params["file"].filename permanent_file.close() So assuming I'm understanding correctly, would something like this avoid the core 'naming' problem? id = UUID. file = request.POST['file'] permanent_file = open(os.path.join(asset_dirname, id.lstrip(os.sep)), 'w') shutil.copyfileobj(file.file, permanent_file) file.file.close() this_file = file.filename permanent_file.close()

    Read the article

  • Renaming TurboGears 2's Repoze Fields with TGAdmin

    - by William Chambers
    I've been working on renaming TurboGears 2's Repoze 'groups' field to 'roles' to free the namespace and db tables for other purposes. Also roles makes much more sense to me then groups because I have a strong Drupal background. Now I have found some of the docs to do this such as these: http://www.turbogears.org/2.1/docs/main/Auth/Customization.html#customizing-the-model-structure-assumed-by-the-quickstart http://code.gustavonarea.net/repoze.what-quickstart/#customizing-the-model-definition However these only go part of the way. I have made (I'm pretty sure at least, I've double checked a few times.) all the changes required as you can see in this diff. This seems to work fine however I've ran into a rather major issue with the TurboGears Admin system. I've tried http://turbogears.org/2.0/docs/main/Extensions/Admin/index.html and it didn't seem to make any difference, however I'm not 100% sure I did it correctly. The problem occurs when I attempt to go to localhost/admin/permissions/. It causes a Internal Server Error and outputs the following error. http://pastebin.com/YWMH3SiU This error does not happen on the Roles/Users pages and the permissions /edit/1 also works. I'm running kubuntu 10.04 with TG 2.1b2. (I'm running the beta mostly for easier mako support which is really important.) Any help would be very appreciated.

    Read the article

  • How can I make this method more Scalalicious

    - by Neil Chambers
    I have a function that calculates the left and right node values for some collection of treeNodes given a simple node.id, node.parentId association. It's very simple and works well enough...but, well, I am wondering if there is a more idiomatic approach. Specifically is there a way to track the left/right values without using some externally tracked value but still keep the tasty recursion. /* * A tree node */ case class TreeNode(val id:String, val parentId: String){ var left: Int = 0 var right: Int = 0 } /* * a method to compute the left/right node values */ def walktree(node: TreeNode) = { /* * increment state for the inner function */ var c = 0 /* * A method to set the increment state */ def increment = { c+=1; c } // poo /* * the tasty inner method * treeNodes is a List[TreeNode] */ def walk(node: TreeNode): Unit = { node.left = increment /* * recurse on all direct descendants */ treeNodes filter( _.parentId == node.id) foreach (walk(_)) node.right = increment } walk(node) } walktree(someRootNode) Edit - The list of nodes is taken from a database. Pulling the nodes into a proper tree would take too much time. I am pulling a flat list into memory and all I have is an association via node id's as pertains to parents and children. Adding left/right node values allows me to get a snapshop of all children (and childrens children) with a single SQL query. The calculation needs to run very quickly in order to maintain data integrity should parent-child associations change (which they do very frequently). In addition to using the awesome Scala collections I've also boosted speed by using parallel processing for some pre/post filtering on the tree nodes. I wanted to find a more idiomatic way of tracking the left/right node values. After looking at the answers listed I have settled on this synthesised version: def walktree(node: TreeNode) = { def walk(node: TreeNode, counter: Int): Int = { node.left = counter node.right = treeNodes .filter( _.parentId == node.id) .foldLeft(counter+1) { (counter, curnode) => walk(curnode, counter) + 1 } node.right } walk(node,1) }

    Read the article

  • SVN Externals in a different SCM

    - by Sean Chambers
    At a previous workplace we used svn externals to update dependent projects when a shared component was updated. This made it easy to see anything that those changes broke, as well as update dependent projects to the latest version of a shared component automatically without any intervention. At a new workplace we are using cc.net with surround scm and I'm trying to find something similar in surround. I haven't found anything like externals, only "shared files", but unlike externals, the shared files doesn't allow you to point at a specific revision of a file for the external. I'm interested in what other people are doing in these scenarios to lean on their continuous integration and treat it more for integration than a "continuous build" server. Does anyone know of a tool or something to do "externals" behavior without using svn? I suppose having an xml registry file of which projects depend on which assemblies and if they should be using the latest version but this seems like overkill.

    Read the article

  • Using asp.net mvc model binders generically

    - by Sean Chambers
    I have a hierarchy of classes that all derive from a base type and the base type also implements an interface. What I'm wanting to do is have one controller to handle the management of the entire hierarchy (as the actions exposed via the controller is identical). That being said, I want to have the views have the type specific fields on it and the model binder to bind against a hidden field value. something like: <input type="text" name="model.DerivedTypeSpecificField" /> <input type="hidden" name="modelType" value="MyDerivedType" /> That being said, the asp.net mvc model binders seem to require the concrete type that they will be creating, because of that reason I would need to create a different controller for every derived type. Has anyone does this before or know how to manipulate the model binder to behave in this way? I could write my own model binder, but I'm not wanting anything past the basic model binding behavior of assign properties and building arrays on the target type. Thanks!

    Read the article

  • git rebse onto remote updates

    - by Blake Chambers
    I work with a small team that uses git for source cod management. Recently, we have been doing topic branches to keep track of features then merging them into master locally then pushing them to a central git repository on a remote server. This works great when no changes have been made in master: I create my topic branch, commit it, merge it into master, then push. Hooray. However, if someone has pushed to origin before i do, my commits are not fast-forward. Thus a merge commit ensues. This also happens when a topic branch needs to merge with master locally to ensure my changes work with the code as of now. So, we end up with merge commits everywhere and a git log rivaling a friendship bracelet. So, rebasing is the obvious choice. What I would like is to: create topic branches holding several commits checkout master and pull (fast-forward because i haven't committed to master) rebase topic branches onto the new head of master rebase topics against master(so the topics start at masters head), bringing master up to my topic head My way of doing this currently is listed below: git checkout master git rebase master topic_1 git rebase topic_1 topic_2 git checkout master git rebase topic_2 git branch -d topic_1 topic_2 Is there a faster way to do this?

    Read the article

  • The maximum row size for the used table type, not counting BLOBs, is 65535. You have to change some columns to TEXT or BLOBs

    - by Matthew Chambers
    Hello I am getting the below message on a table i am trying to create The maximum row size for the used table type, not counting BLOBs, is 65535. You have to change some columns to TEXT or BLOBs Anyone know the answer to this please -- Table warrington_central.job -- ----------------------------------------------------- CREATE TABLE IF NOT EXISTS warrington_central.job ( id MEDIUMINT(8) UNSIGNED NOT NULL AUTO_INCREMENT , alias_title VARCHAR(255) NOT NULL , reference_number VARCHAR(100) NOT NULL , title VARCHAR(255) NOT NULL , primary_category SMALLINT(5) UNSIGNED NOT NULL , secondary_category SMALLINT(5) UNSIGNED NOT NULL , tertiary_category SMALLINT(5) UNSIGNED NULL , address_id BIGINT(20) UNSIGNED NOT NULL , geolocation_id BIGINT(20) UNSIGNED NULL , company VARCHAR(255) NOT NULL , description VARCHAR(10000) NOT NULL , skills_required VARCHAR(10000) NOT NULL , job_type TINYINT(2) UNSIGNED NOT NULL , experience_months_required TINYINT(2) UNSIGNED NOT NULL , experience_years_required TINYINT(2) UNSIGNED NOT NULL , salary_range VARCHAR(30) NOT NULL , extra_benefits_above_salary VARCHAR(500) NOT NULL , available_from DATE NULL , available_to DATE NULL , extra_location_details VARCHAR(1000) NOT NULL , contact_email VARCHAR(100) NOT NULL , contact_phone_number VARCHAR(20) NOT NULL , contact_mobile_number VARCHAR(20) NOT NULL , terms_conditions_application VARCHAR(5000) NOT NULL , link_to_profile ENUM('0','1') NOT NULL , created_on DATETIME NOT NULL , updated_on DATETIME NOT NULL , updated_by BIGINT(20) UNSIGNED NOT NULL , add_contact_form ENUM('0','1') NOT NULL , admin_package_id TINYINT(1) UNSIGNED NOT NULL , package_start_date DATETIME NOT NULL , package_end_date DATETIME NULL , package_comment VARCHAR(500) NOT NULL , viewable_to_members_only ENUM('0','1') NOT NULL , advertise_to DATETIME NULL , show_comment ENUM('0','1') NOT NULL , hits BIGINT(20) UNSIGNED NOT NULL DEFAULT 0 , visible ENUM('0','1') NOT NULL DEFAULT '0' , approved ENUM('I/* large SQL query (3.9 KB), snipped at 2,000 characters / / SQL Error (1118): Row size too large. The maximum row size for the used table type, not counting BLOBs, is 65535. You have to change some columns to TEXT or BLOBs */ SHOW WARNINGS;

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >