Search Results

Search found 3603 results on 145 pages for 'andrew james watt'.

Page 30/145 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• I have a new seagate 3tb hard drive and when i installed it it says 349gb free

  - by Joseph Sexton

  my new seagate sata drive keeps showing as a 249gb drive but in the setup part when i press del at the boot up it states there a 3000gb drive and i have searched for a solution but havent found one yet. I havent tried in a different pc yet and I have an asus gaming board with 2 video cards sli'ed and i have windows 7 ultimate 64 bit with 8gb ram and a hp 23" widescreen monitor and the sniper gaming case and a salitek lighted up gaming keyboard and a razor death adder gaming mouse and a corsair 850 watt power supply. Any help would be great and appriciated

  Read the article

• How much money can I save from installing a 80 plus bronze or gold PSU? [closed]

  - by David

  Currently I've only a 300 watt PSU and my pc is working like a charm but with all the components it should use the psu to the max. Recently I've read about 80 plus certificate and I'm wondering if it's worth to buy a 80 plus certificate psu? My power cost last year was also higher then before and my pc turns almost 14/7 a day. I mean power cost in used power not in augmented prices. I'm also planing to buy a SLI video card.

  Read the article

• Ping bind errors in Operations Manager 2007

  - by Andrew Rice

  I am having an issue in SCOM 2007 R2. I am routinely getting the following errors: Failed to ping or bind to the RID Master FSMO role holder. The default gateway is not pingable. Failed to ping or bind to the Infrastructure Master FSMO role holder. The default gateway is not pingable. Failed to ping or bind to the Domain Naming Master FSMO role holder. The default gateway is not pingable. Failed to ping of bind to the Schema Master FSMO role holder. The default gateway is not pingable. The weird thing about these errors if I log into the server in question or if I log in to the SCOM server I can ping everything just fine. To top it all off the server in question is the role holder for 2 of the roles it is complaining about (RID and Infrastructure). Any thoughts as to what might be going on?

  Read the article

• PHP suddenly failed after IIS update

  - by James Hay

  All my application pools were stopped this morning after I got to work. I can restart them, but when I try to load the website the app pool crashes again. Update: I've looked in the GAC as the error below suggests and it seems that the file is not there. How do I get it back? Update 2: I found a further error in the event log saying The Module name FastCgiModule path C:\WINDOWS\System32\inetsrv\iisfcgi.dll returned an error from registration. The data is the error. So following the information from here http://forums.iis.net/t/1153937.aspx I removed CGI and my sites are working again. This has fixed the initial problem, but now I don't have FastCGI so I'm fairly sure that PHP will no longer be working (I don't have any PHP at the moment to test). Original Post I'm getting this error in the event viewer: IISMANAGER_ERROR_LOADING_PROVIDER_TYPE IIS Manager could not load type 'Web.Management.PHP.PHPProvider, Web.Management.PHP, Version=1.2.0.0, Culture=neutral, PublicKeyToken=8175de49a9aec91d' for module provider 'PHP' that is declared in %windir%\system32\inetsrv\config\administration.config. Verify that the type is correct, and that the assembly that contains the module provider is in the Global Assembly Cache (GAC). Exception:System.IO.FileNotFoundException: Could not load file or assembly 'Web.Management.PHP, Version=1.2.0.0, Culture=neutral, PublicKeyToken=8175de49a9aec91d' or one of its dependencies. The system cannot find the file specified. File name: 'Web.Management.PHP, Version=1.2.0.0, Culture=neutral, PublicKeyToken=8175de49a9aec91d' at System.RuntimeTypeHandle._GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, Boolean loadTypeFromPartialName) at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark) at System.RuntimeType.PrivateGetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark) at System.Type.GetType(String typeName, Boolean throwOnError) at Microsoft.Web.Management.Server.AdministrationModuleProvider.GetModuleProvider(String userName, String connectionName) WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog]. Process:InetMgr Connection:CT211511\Administrator Everything was working fine last night when I left work, and since they've done the maintenance it's all broken.

  Read the article

• Excel error "This workbook contains Excel 4.0 macros or Excel 5.0 modules"

  - by James

  I have a workbook that was protected via the Protect Workbook feature. It was sent to someone else to modify. When they sent it back, it was unprotected and when I try to reprotect it I get this error, "This workbook contains Excel 4.0 macros or Excel 5.0 modules. If you would like to password protect or restrict permission to this document, you need to remove these macros." I looked and there are no new macros in the edited file. The original file contained the same macros and it was able to be write protected, so I'm not sure why the modified file is having a problem. What are common causes and solutions for this error and does it make sense for the modified file to have the error when the original doesn't?

  Read the article

• Severe errors in solr configuration: Error loading class 'solr.TrieDateField'

  - by James Lawruk

  Installed Solr on my Windows XP PC. Tomcat seems to be working fine. Cannot get Solr to work. I noticed the TrieDateField is declared in a file called schema.xml in the SolrHome directory. Any thoughts? The Url http://localhost:8080/solr/ returns: HTTP Status 500 - Severe errors in solr configuration. Check your log files for more detailed information on what may be wrong. If you want solr to continue after configuration errors, change: false in null ------------------------------------------------------------- org.apache.solr.common.SolrException: Unknown fieldtype 'date' specified on field updated Here is an excerpt from the catalina log file: SEVERE: org.apache.solr.common.SolrException: Error loading class 'solr.TrieDateField' at org.apache.solr.core.SolrResourceLoader.findClass(SolrResourceLoader.java:273) Caused by: java.lang.ClassNotFoundException: solr.TrieDateField

  Read the article

• Kodak Scanner Software Issue 0xc0000005

  - by Andrew

  I am trying to be able to use a program called Kodak Smart Touch, but just today I have experienced an error preventing it from opening. The scanner is a business class scanner, an i2900. It comes with a small program called Kodak Smart Touch. This program allows you to select and customize a number of presets on the front panel and automatically create/save scanned files, etc. I was running a backup with Aomei Backupper at the time, and I wanted to scan a file. I tried to scan as normal, but right at the end the program quit with an error. Now, whenever I try to start Smart Touch, even not running the backup and with Aomei uninstalled, the following error pops up: Title of message: KSSCFG (version 1.7.15.121102) has stopped working. Body: See (path name) for more information. When I go to the path in the error message, there are two files, ERRORLOG.txt and KSSCFG.dmp. The error log says, "KSSCFG (version 1.7.15.322.121102) case an Access Violation(0xc0000005). Error occur at 2014/06/11 21:37:54 Operation System: Windows 7 64bits (6.1.7601) processor(s) type AMD x86 or x64" The dump file can be downloaded here: http://l.bitcasa.com/yzbtv1VV Opening it with a hex editor yields very little of use, but I do have an internal commandline utility that may help: http://l.bitcasa.com/cTXvAsst I've already uninstalled and reinstalled all the kodak software several times to no avail. What is really odd is that the TWAIN and ISIS drivers work fine through another scanning program. I am at my wit's end, and I have no idea what to do next. Thanks.

  Read the article

• Why does ssh hang after "debug1: loaded 3 keys"

  - by James Moore

  Trying to log in to an Amazon EC2 instance running Ubuntu 10.04.1. I can log in just fine, no issues. A different user, coming from a different network just gets this: OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to xxxx [xxxx] port 80. debug1: Connection established. debug1: identity file /.ssh/identity type -1 debug1: identity file /.ssh/id_rsa type -1 debug1: identity file /.ssh/id_dsa type -1 debug1: loaded 3 keys And then it hangs. We've tried running sshd on port 22 and port 80 I'm guessing that it's not a firewall problem since the verbose output reports that the connection is established. I don't see anything in /var/log/auth.log when the failing user connects. I do see entries when I log in successfully.

  Read the article

• How to set ulimits in Solaris 10

  - by James Bradley

  I normally use pam_limits.so and /etc/security/limits.conf to set ulimits on filesize/cputime etc for the regular users logging in to my server running Ubuntu. Can anyone give the best way of doing similar with Solaris 10. I think it is done using /etc/system but have no idea what to add to the file or indeed if it is the correct file. I'm particularly interested in setting up ulimit -f without going down the .profile route.

  Read the article

• Can't get MySQL to install

  - by James Marthenal

  I'd like to think I know what I'm doing in a Unix shell but maybe not. I made a mistake in a configuration file for MySQL, so I decided to just uninstall it and then reinstall it, so I did: sudo apt-get --purge remove mysql-server mysql-server-5.0 mysql-client The files were deleted, so I then tried to install it, but it didn't ask me for a root password or anything else, so I uninstalled it using the above command again and then did sudo rm -rf /etc/mysql sudo rm /etc/init.d/mysql sudo rm -rf /var/lib/mysql* I then restarted the computer then installed it again: sudo apt-get install mysql-server mysql-client It asked for a root password, and everything looked like it would work, until I saw this: $ sudo apt-get install mysql-server mysql-client Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: mysql-server-5.0 Suggested packages: tinyca The following NEW packages will be installed: mysql-client mysql-server mysql-server-5.0 0 upgraded, 3 newly installed, 0 to remove and 1 not upgraded. Need to get 0B/27.4MB of archives. After this operation, 86.7MB of additional disk space will be used. Do you want to continue [Y/n]? y WARNING: The following packages cannot be authenticated! mysql-server-5.0 mysql-client mysql-server Authentication warning overridden. Preconfiguring packages ... Can't exec "/tmp/mysql-server-5.0.config.28101": Permission denied at /usr/share/perl/5.10/IPC/Open3.pm line 168. open2: exec of /tmp/mysql-server-5.0.config.28101 configure failed at /usr/share/perl5/Debconf/ConfModule.pm line 59 mysql-server-5.0 failed to preconfigure, with exit status 255 Selecting previously deselected package mysql-server-5.0. (Reading database ... 160284 files and directories currently installed.) Unpacking mysql-server-5.0 (from .../mysql-server-5.0_5.0.51a-24+lenny5_amd64.deb) ... Selecting previously deselected package mysql-client. Unpacking mysql-client (from .../mysql-client_5.0.51a-24+lenny5_all.deb) ... Selecting previously deselected package mysql-server. Unpacking mysql-server (from .../mysql-server_5.0.51a-24+lenny5_all.deb) ... Processing triggers for man-db ... Setting up mysql-server-5.0 (5.0.51a-24+lenny5) ... Stopping MySQL database server: mysqld. /var/lib/dpkg/info/mysql-server-5.0.postinst: line 144: /etc/mysql/conf.d/old_passwords.cnf: No such file or directory dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1 Setting up mysql-client (5.0.51a-24+lenny5) ... dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.0; however: Package mysql-server-5.0 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.0 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) Now I can't seem to figure out what to do. I just want to get a clean MySQL installation at this point. I'm running the latest stable release of Debian. All help is appreciated—thanks! Edit: I looked at this similar question, which suggests that I uninstall mysql-common, but when I try to do so I see: The following packages will be REMOVED: apache2 apache2-mpm-prefork apache2-utils apache2.2-common git-svn libapache2-mod-php5 libapache2-mod-python libapache2-svn libaprutil1 libdbd-mysql-perl libdbd-mysql-rubygem libmysql-ruby libmysql-ruby1.8 libmysql-rubygem libmysqlclient15-dev libmysqlclient15off librdf-perl librdf0 libserf-0-0 libsvn-perl libsvn1 mysql-client-5.0 mysql-common mytop ndn-apache22-php5 ndn-apache22-svn ndn-interpreters ndn-lighttpd ndn-netsaint-plugins ndn-perl-modules ndn-php5-cgi ndn-php5-xcache ndn-php53 ndn-php53-suhosin ndn-rubygems php5 php5-mcrypt php5-mysql proftpd proftpd-mod-mysql python-django python-mysqldb python-subversion python-svn subversion subversion-tools trac zendoptimizer 0 upgraded, 0 newly installed, 48 to remove and 1 not upgraded. Eeek! Any suggestions?

  Read the article

• Problem setting up Master-Master Replication in MySQL

  - by Andrew

  I am attempting to setup Master-Master Replication on two MySQL database servers. I have followed the steps in this guide, but it fails in the middle of Step 4 with SHOW MASTER STATUS; It simply returns an empty set. I get the same 3 errors in both servers' logs. MySQL errors on SQL1: [ERROR] Failed to open the relay log './sql1-relay-bin.000001' (relay_log_pos 4) [ERROR] Could not find target log during relay log initialization [ERROR] Failed to initialize the master info structure MySQL Errors on SQL2: [ERROR] Failed to open the relay log './sql2-relay-bin.000001' (relay_log_pos 4) [ERROR] Could not find target log during relay log initialization [ERROR] Failed to initialize the master info structure The errors make no sense because I'm not referencing those files in any of my configurations. I'm using Ubuntu Server 10.04 x64 and my configuration files are copied below. I don't know where to go from here or how to troubleshoot this. Please help. Thanks. /etc/mysql/my.cnf on SQL1: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = <SQL1's IP> # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. server-id = 1 replicate-same-server-id = 0 auto-increment-increment = 2 auto-increment-offset = 1 master-host = <SQL2's IP> master-user = slave_user master-password = "slave_password" master-connect-retry = 60 replicate-do-db = db1 log-bin= /var/log/mysql/mysql-bin.log binlog-do-db = db1 binlog-ignore-db = mysql relay-log = /var/lib/mysql/slave-relay.log relay-log-index = /var/lib/mysql/slave-relay-log.index expire_logs_days = 10 max_binlog_size = 500M # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ /etc/mysql/my.cnf on SQL2: # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = <SQL2's IP> # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. server-id = 2 replicate-same-server-id = 0 auto-increment-increment = 2 auto-increment-offset = 2 master-host = <SQL1's IP> master-user = slave_user master-password = "slave_password" master-connect-retry = 60 replicate-do-db = db1 log-bin= /var/log/mysql/mysql-bin.log binlog-do-db = db1 binlog-ignore-db = mysql relay-log = /var/lib/mysql/slave-relay.log relay-log-index = /var/lib/mysql/slave-relay-log.index expire_logs_days = 10 max_binlog_size = 500M # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/

  Read the article

• Renci.SSHNet and HP ILO 4

  - by Andrew J. Brehm

  I am using Renci.SSHNet to connect to HP iLO processors. Generally this works fine and I can connect and run several commands and disconnect. However, I noticed that a few new servers that use iLO 4 simply don't react to any but the first command sent. When I login using Putty everything works fine, but when using an SSH connection with Renci only the first command sent is recognised whereas the second and further commands do not cause any reaction whatsoever by the iLO processor, not even an error message. Any ideas why that might be?

  Read the article

• Power cycles on/off 3 times before booting properly from cold start, no other issues (New System)

  - by James

  Relevant Specs: Sapphire 5850, core i7 920, Seasonic x750 power supply, ECS X58B-A2 mobo. From a cold boot, meaning all power totally disconnected at the wall, the system will power on for less than a second and then power off completely. After two seconds of being powered off this will repeat and on the third "attempt" the computer will boot. To be very specific here is what happens: The power is turned on at the wall and on the psu, the orange stdby LED on the mobo is illuminated but the system is 'off'. I hit the power button on the case or on the mobo itself I hear the relay (?) in the psu closing The case light comes on and the mobo power light comes on. The fans start rotating. Immediately after this the I hear some relay click - the power lights extinguish, the fans stop, the stdby light remains on. Less than 2 seconds pass and the cycle repeats without any intervention from me. On the third attempt it boots normally and the machine runs perfectly. If I do a soft reboot or a full shutdown the computer starts normally the next time. It's only if I pull the power cord or flick the switch off on the PSU that I get the cycling again. Basically any time the stdby light on the mobo goes out. I have removed the graphics card and I get the same problem. I have removed the PSU, hotwired it to the ON position and verified voltages on all lines. The relay does not cycle when I do this. If I connect only the 24 pin ATX connector to the mobo and not the 8 pin ATX12V / CPU connector then I will not get the cycling, the fans run, the power light stays on, but obviously the system can't boot. Disconnecting all fans has no effect on the problem. My feeling it that it's something to do with the motherboard like a capacitor that's taking a long time to charge because it's leaking or something along those lines. But I can't imagine what could be 'wrong' with it and only manifest itself as a problem under these very specific circumstances. Any ideas? Thanks.

  Read the article

• Ubuntu 8.04 server is not retaining a static IP address

  - by James Pierce

  I recently setup a linux box running Ubuntu 8.04 (to match another server with 8.04). I need to insure that this box has a static IP address and I changed /etc/network/interfaces to set up the static IP address and when I run sudo /etc/init.d/networking restart it works fine for a while, but always reverts back to 10.0.1.24 after being idle for a while. I also tried stopping/removing the dhcp client, but that didn't help. sudo /etc/init.d/dhcp stop sudo apt-get remove dhcp3-client Here is my /etc/init.d/networking: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.0.1.4 netmask 255.255.255.0 broadcast 10.0.1.255 gateway 10.0.1.1 Any thoughts? Thanks.

  Read the article

• Migration of VM from Hyper-V to Hyper-V R2 - Pass through disks

  - by Andrew Gillen

  I am trying to migrate a VM which is using two pass through disks from a legacy Hyper-V Cluster to a new R2 cluster. The migrated VM cannot use the pass through disks though. The guest OS (2008 R2) doesn't seem to like the disk and eventually tries to format the disk instead of mounting it. The migration process I have been using for all my VMs is to export the VM to a new lun, then add that new lun to the new cluster, importing the vm off it in the hyper-v console, then making it highly available. I assumed I could do the same thing and just add the two pass through disks to the new cluster and then attach them inside Hyper-V. Is there a process I need to follow to migrate pass through disks that does not involve setting up new Luns and robocopying the data over?

  Read the article

• ActiveSync gives a 401.2 error

  - by Justin James

  Hello - I've been struggling for a while with a problem with ActiveSync, it is giving 401.2 errors when trying to access the mailboxes. Oddly enough, clients can get to the calendars just fine. I've tried from an Android device as well as the Exchange remote connectivity troubleshooter, same error both times. Here is the configuration: Connectivity through ISA 2006 Exchange 2007 on Windows 2008 Basic authentication is on ISA is passing through all authentication directly to the Exchange server The user IS allowed to get to ActiveSync in their Exchange mailbox settings I have tried the following, without success: * Making SSL not required * Enabling Windows Integrated and Digest authentication Here is an example of the errors in the IIS log: OPTIONS /Microsoft-Server-ActiveSync/default.eas - 443 - 192.168.32.18 TestActiveSyncConnectivity 401 2 5 0 Here is what I am seeing in my trace log: ModuleName IIS Web Core Notification 2 HttpStatus 401 HttpReason Unauthorized HttpSubStatus 2 ErrorCode 2147942405 ConfigExceptionInfo Notification AUTHENTICATE_REQUEST ErrorCode Access is denied. (0x80070005) I'm 100% stumped. Any clues? Thanks! J.Ja

  Read the article

• Problem with icacls on Windows 2003: "Acl length is incorrect"

  - by Andrew J. Brehm

  I am confused by the output of icacls on Windows 2003. Everything appears to work on Windows 2008. I am trying to change permissions on a directory: icacls . /grant mydomain\someuser:(OI)(CI)(F) This results in the following error: .: Acl length is incorrect. .: An internal error occurred. Successfully processed 0 files; Failed processing 1 files The same command used on a file named "file" works: icacls file /grant mydomain\someuser:(OI)(CI)(F) Result is: processed file: file Successfully processed 1 files; Failed processing 0 files What's going on?

  Read the article

• "power limit notification" clobbering on 12G Dell servers with RHEL6

  - by Andrew B

  Server: Poweredge r620 OS: RHEL 6.4 Kernel: 2.6.32-358.18.1.el6.x86_64 I'm experiencing application alarms in my production environment. Critical CPU hungry processes are being starved of resources and causing a processing backlog. The problem is happening on all the 12th Generation Dell servers (r620s) in a recently deployed cluster. As near as I can tell, instances of this happening are matching up to peak CPU utilization, accompanied by massive amounts of "power limit notification" spam in dmesg. An excerpt of one of these events: Nov 7 10:15:15 someserver [.crit] CPU12: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU0: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU6: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU14: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU18: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU2: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU4: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU16: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU0: Package power limit notification (total events = 11) Nov 7 10:15:15 someserver [.crit] CPU6: Package power limit notification (total events = 13) Nov 7 10:15:15 someserver [.crit] CPU14: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU18: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU20: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU8: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU2: Package power limit notification (total events = 12) Nov 7 10:15:15 someserver [.crit] CPU10: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU22: Core power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU4: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU16: Package power limit notification (total events = 13) Nov 7 10:15:15 someserver [.crit] CPU20: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU8: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU10: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU22: Package power limit notification (total events = 14) Nov 7 10:15:15 someserver [.crit] CPU15: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU3: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU1: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU5: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU17: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU13: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU15: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU3: Package power limit notification (total events = 374) Nov 7 10:15:15 someserver [.crit] CPU1: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU5: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU7: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU19: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU17: Package power limit notification (total events = 377) Nov 7 10:15:15 someserver [.crit] CPU9: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU21: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU23: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU11: Core power limit notification (total events = 369) Nov 7 10:15:15 someserver [.crit] CPU13: Package power limit notification (total events = 376) Nov 7 10:15:15 someserver [.crit] CPU7: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU19: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU9: Package power limit notification (total events = 374) Nov 7 10:15:15 someserver [.crit] CPU21: Package power limit notification (total events = 375) Nov 7 10:15:15 someserver [.crit] CPU23: Package power limit notification (total events = 374) A little Google Fu reveals that this is typically associated with the CPU running hot, or voltage regulation kicking in. I don't think that's what is happening though. Temperature sensors for all servers in the cluster are running fine, Power Cap Policy is disabled in the iDRAC, and my System Profile is set to "Performance" on all of these servers: # omreport chassis biossetup | grep -A10 'System Profile' System Profile Settings ------------------------------------------ System Profile : Performance CPU Power Management : Maximum Performance Memory Frequency : Maximum Performance Turbo Boost : Enabled C1E : Disabled C States : Disabled Monitor/Mwait : Enabled Memory Patrol Scrub : Standard Memory Refresh Rate : 1x Memory Operating Voltage : Auto Collaborative CPU Performance Control : Disabled A Dell mailing list post describes the symptoms almost perfectly. Dell suggested that the author try using the Performance profile, but that didn't help. He ended up applying some settings in Dell's guide for configuring a server for low latency environments and one of those settings (or a combination thereof) seems to have fixed the problem. Kernel.org bug #36182 notes that power-limit interrupt debugging was enabled by default, which is causing performance degradation in scenarios where CPU voltage regulation is kicking in. A RHN KB article (RHN login required) mentions a problem impacting PE r620 and r720 servers not running the Performance profile, and recommends an update to a kernel released two weeks ago. ...Except we are running the Performance profile... Everything I can find online is running me in circles here. What's the heck is going on?

  Read the article

• How can I create proportionally-sized pie charts side-by-side in Excel 2007?

  - by Andrew Doran

  I have a pivot table with two sets of data as follows: 2011 2012 Slice A 45 20 Slice B 33 28 Slice C 22 2 I am trying to present two pie charts side-by-side, one with the 2011 data and one with the 2012 data. I want the relative size of each pie chart to reflect the totals, i.e. the pie chart with the 2011 data (totalling 100) should be twice the size of the pie chart with the 2012 data (totalling 50). The 'pie of pie' chart type seems to be closest to what I am looking for but this breaks out data from one slice and presents it in a second diagram so it isn't appropriate here.

  Read the article

• Can't install MySQL

  - by James Marthenal

  I have a Debian machine that I have previously installed MySQL on. In an attempt to delete it, I stupidly deleted the directories/files /etc/mysql/, /etc/init.d/mysql, /usr/lib/mysql/, /var/lib/mysql/. I then later did sudo apt-get purge mysql-server mysql-server-5.0. Now, when I try to install mysql-server, I get: $ sudo apt-get install mysql-server Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: mysql-server-5.0 The following NEW packages will be installed: mysql-server mysql-server-5.0 0 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/27.4MB of archives. After this operation, 86.6MB of additional disk space will be used. Do you want to continue [Y/n]? y WARNING: The following packages cannot be authenticated! mysql-server-5.0 mysql-server Authentication warning overridden. Preconfiguring packages ... Can't exec "/tmp/mysql-server-5.0.config.122781": Permission denied at /usr/share/perl/5.10/IPC/Open3.pm line 168. open2: exec of /tmp/mysql-server-5.0.config.122781 configure failed at /usr/share/perl5/Debconf/ConfModule.pm line 59 mysql-server-5.0 failed to preconfigure, with exit status 255 Selecting previously deselected package mysql-server-5.0. (Reading database ... 158138 files and directories currently installed.) Unpacking mysql-server-5.0 (from .../mysql-server-5.0_5.0.51a-24+lenny5_amd64.deb) ... Selecting previously deselected package mysql-server. Unpacking mysql-server (from .../mysql-server_5.0.51a-24+lenny5_all.deb) ... Processing triggers for man-db ... Setting up mysql-server-5.0 (5.0.51a-24+lenny5) ... Stopping MySQL database server: mysqld. 110206 19:31:13 [ERROR] /usr/sbin/mysqld: Can't find file: './mysql/user.frm' (errno: 13) 110206 19:31:13 [ERROR] /usr/sbin/mysqld: Can't find file: './mysql/user.frm' (errno: 13) ERROR: 1017 Can't find file: './mysql/user.frm' (errno: 13) 110206 19:31:13 [ERROR] Aborting 110206 19:31:13 [Note] /usr/sbin/mysqld: Shutdown complete /etc/init.d/mysql: WARNING: /etc/mysql/my.cnf cannot be read. See README.Debian.gz (warning). Starting MySQL database server: mysqld . . . . . . . . . . . . . . failed! invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.0; however: Package mysql-server-5.0 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.0 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) I have tried to search for a solution via Google and have found lots of suggestions for this problem, but ultimately it seems like the problem is that by deleting the files manually, I messed up the mysql-common package. I have tried to do sudo apt-get install --reinstall mysql-common followed by installing mysql-server, but it does the exact same thing. I previously had MySQL working great, I just want to get it back to that state. Thanks so much for your help.

  Read the article

• Getting a VMnet0 error in VMWare workstation after updating host computer from Windows 8 to 8.1

  - by Andrew

  Yesterday, I updated my computer from Windows 8 to 8.1. I have VMWare Workstation 10 running Windows XP on this computer and prior to the update I had no issues connecting to my network. However, since updating, I haven't been able to connect to any network and I'm getting the following error: "The network bridge on device VMnet0 is not running. The firtual machine will not be able to communicate with the host or with other machines on your network. Failed to connect virtual device Ethernet0" I've checked all of my settings which currently have my network adapter set for a bridged connection and under device status "connected" is checked. Not really sure where to go from here, but after doing some research I have seen that others users have reported getting this error when updating the OS (any OS, not windows 8 specifically) of the host computer. Thanks in advance to anyone who can help.

  Read the article

• Helicon ISAPI Rewrite is processing Rewrite Rules for httpd.conf but not .htaccess

  - by James Lawruk

  We have Helicon ISAPI Rewrite 3 installed on our Windows 2003 Web server. The RewriteRules work fine in the global file located in the httpd.conf file. The server serves several Web sites and we were hoping to create RewriteRules to apply to specific Web sites. In the IIS Properties for each Web site there exists a separate tab for ISAPI_Rewrite pointing to the .htaccess file for that Web site. No rules applied to the .htaccess files work. Any ideas why the .htaaccess files have no effect.

  Read the article

• Windows7 and Virtual PC guest copy/paste intermittent delay

  - by James

  I've been using Virtual PC for some time now and have not had any issues with copy and paste until I upgraded my host to Windows7 64-bit. After the upgrade sometimes when I copy and paste some text there is like a 15-20 second delay before it completes, this is very frustrating when I'm trying to get my work done. The problem seems to be intermittent in nature, it seems to occur when I have not done a copy paste for a while. After the delay occurs copy and paste seem to work at normal speed until I don't copy and paste for a good length of time. My question is, is there any solutions or patches that can fix this copy/paste issue for virtual PC running in a 64-bit windows7 host?

  Read the article

• Windows 7 Backup not backing up custom library?

  - by James McMahon

  I have created a custom Library under Windows 7 64bit professional to handle my source code. When I tried Windows Backup and Restore for the first time I get the following error Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\Source. Error:(The system cannot find the file specified. (0x80070002)) I've found a thread on the error on the Microsoft answers site. But it appears to be 404 (there is a version in Google's Cache) and the thread starter never gets an answer to his issue that works. The official Microsoft answer on this is This problem is due to one or more profiles under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\ProfileList with missing ProfileImagePath. To check whether you have missing profiles: Open regedit, navigate to the above registry key. (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList). Expand the list Click on each of the profiles listed. The first 3 profiles should have ProfileImagePath value of %SystemRoot%\System32\Config\SystemProfile, %SystemRoot%\ServiceProfiles\LocalService, and %SystemRoot%\ServiceProfiles\NetworkService respectively. Starting from the 4th profile, the ProfileImagePath should contain path to the user profiles on your machine, such as C:\users\Christine If one or more of the profile has no profile image, then you have missing profiles. To work around this, delete the profile in question (Caution: The registry contains critical settings that are necessary for your system to function properly. Take extra caution while making changes) First, export the ProfileList key for safekeeping. (Right click on the key, choose “Export”, and save it to the desktop.) Right click on the profile in question, choose delete. Try backup again. This does not work for me. Anyone have any idea what is going on here?

  Read the article

• Multiple INET sockets (mulple IP's too) connected to UNIX sockets

  - by Andrew

  HOST = same host all the time, accepts multiple connection. I have a dedicated server and I will buy extra IP's. Socket 1 connects to HOST:PORT, from IP-1 Socket 2 connects to HOST:PORT, from IP-1 Socket 3 connects to HOST:PORT, from IP-1 Socket 4 connects to HOST:PORT, from IP-2 Socket 5 connects to HOST:PORT, from IP-2 Socket 6 connects to HOST:PORT, from IP-2 After creating all sockets I want to access them easy as UNIX sockets from PHP. /sys/socket1 /sys/socket2 /sys/socket3 /sys/socket4 /sys/socket5 /sys/socket6 I want the sockets to work in background (like daemon) and I want to be able to connect from PHP to any of this sockets and RECV/SEND whatever I want. I saw "socat" and I think that's the solution for me, please tell me how to use socat, or how to do it other way. Thankyou!

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >