Search Results

Search found 787 results on 32 pages for 'bootable'.

Page 30/32 | < Previous Page | 26 27 28 29 30 31 32  | Next Page >

• Windows 7 not booting after failed SRT (SSD caching) install

  - by david

  This is a fairly new computer, only about a month old. i7 2700k, z68 motherboard, with a 1.5tb WD black HD, and a 128gb crucial M4 ssd. I followed the instructions for setting up ssd caching, the SATA controller was set to RAID, I installed the intel software and enabled acceleration and it said everything went fine. But when I went to reboot, I received the lovely "Reboot and Select proper Boot device" error message. I checked the bios, and it was booting from the correct HD (I tried the only other option anyway just in case, it was the ~50 odd gb of unformatted space left on the SSD) AFter that I entered the raid until (ctrl-i at boot) and removed the acceleration and deleted the raid array (because it was being used as a cache this was non destructive) Still no boot. So I reinstalled win7 directly on the SSD, booted, and checked the HDD to make sure it hadn't been wiped. It hadn't, all the files were still there, including all the windows stuff. I backed up my data to an external drive just in case, but I'd really like to get this install booting again. I trawled the webs a bit, and have tried entering recovery mode and using the bootrec.exe and bootsect.exe to fix it, but to be honest I'm not sure what I'm doing with those. My question is basically: How do I make my harddrive bootable again?

  Read the article

• Windows Broken after Deletion of HP_TOOLS partition

  - by beanland

  When I decided to install Ubuntu on my laptop as a dual-boot, I recognized that Windows 7 was using four separate partitions. I (yes, this was stupid) thought the HP_TOOLS partition was probably one I could get rid of, so I deleted it and installed Ubuntu side-by-side Windows using the installation wizard, but now Windows won't progress past the loading screen without the computer automatically restarting. I've had to use Ubuntu exclusively since then. I'm not sure how I can recover it. All of my files seem to still be there--I can mount the other partition and see them, use them, etc--but Windows 7 won't boot. I really have no idea what to do or what to try, or even if I'm at a salvageable point. here's a screenshot of GParted: This makes me suspicious that it wasn't necessarily the removal of my HP_TOOLS partition but the "unknown" status of that 992.50 KiB partition there, sda1. I'm assuming that's the recovery one? How can I get Windows bootable again? I'm sorry, but I'm so unfamiliar with this sort of thing I'm not quite sure where to start.

  Read the article

• How to copy a floppy boot disk?

  - by Sammy

  I have a floppy boot disk and I would like to copy it to preserve it, as a backup. If I have two floppy drives, A and B, how can I copy the disk? Assuming one has two floppy drives Can I simply insert the floppy disk in one of the drives and then an empty floppy disk in the other and issue a simple command like this one. A:\>copy . b: Will this only copy the contents of the current directory and none of the files in subdirectories? Do I have to explicitly specify the option to copy everything? Also, what about the boot information? That won't get copied, right? If one has only one floppy drive... How do you copy a floppy disk if you only have one floppy drive? Do you in fact have to copy its contents to the local hard drive C and then copy that to an empty floppy disk using the same floppy drive? A:\>copy . c:\floppydisk A:\> A:\>c: C:\> C:\>copy floppydisk a: C:\> I'm guessing I will need some type of disk image tool to really copy everything on a bootable floppy disk. Something like the dd command on Linux perhaps? Am I right?

  Read the article

• Corsair SSD appears completely blank and does not retain written data

  - by ebanders

  I have a 180GB Corsair SSD (model# CSSD-F180GB2-BRKT) as the primary drive in a Windows laptop. Recently the machine became unbootable after installing Windows updates. Windows installed updates before the machine shut down and the next time the machine boot up it complained about not being able to find a bootable device. After finding fixmbr unsuccessful at making the machine unbootable, I investigated a little within knoppix. Fdisk revealed an empty partition table. A scan by Testdisk came up empty. And finally 'head -c 1024 | hd' reveals all zeros. Creating a primary partition spanning the whole disk completes successfully, but after a reboot the disk appears empty again. dmesg reveals no read or write errors. smartctl indicates that the drive is healthy- although the SMART attribute values do not appear to be read properly. "Data Page | WARNING: PREVIOUS ATTRIBUTE HAS TWO" and "Threshold Page | INCONSISTENT IDENTITIES IN THE DATA" messages appear within the table of values. I don't have much experience with SSDs. Is this drive dead or something? Can anyone recommend any diagnostic tools that may be suited for diagnosing SSDs?

  Read the article

• Problem with stack based implementation of function 0x42 of int 0x13

  - by IceCoder

  I'm trying a new approach to int 0x13 (just to learn more about the way the system works): using stack to create a DAP.. Assuming that DL contains the disk number, AX contains the address of the bootable entry in PT, DS is updated to the right segment and the stack is correctly set, this is the code: push DWORD 0x00000000 add ax, 0x0008 mov si, ax push DWORD [ds:(si)] push DWORD 0x00007c00 push WORD 0x0001 push WORD 0x0010 push ss pop ds mov si, sp mov sp, bp mov ah, 0x42 int 0x13 As you can see: I push the dap structure onto the stack, update DS:SI in order to point to it, DL is already set, then set AX to 0x42 and call int 0x13 the result is error 0x01 in AH and obviously CF set. No sectors are transferred. I checked the stack trace endlessly and it is ok, the partition table is ok too.. I cannot figure out what I'm missing... This is the stack trace portion of the disk address packet: 0x000079ea: 10 00 adc %al,(%bx,%si) 0x000079ec: 01 00 add %ax,(%bx,%si) 0x000079ee: 00 7c 00 add %bh,0x0(%si) 0x000079f1: 00 00 add %al,(%bx,%si) 0x000079f3: 08 00 or %al,(%bx,%si) 0x000079f5: 00 00 add %al,(%bx,%si) 0x000079f7: 00 00 add %al,(%bx,%si) 0x000079f9: 00 a0 07 be add %ah,-0x41f9(%bx,%si) I'm using qemu latest version and trying to read from hard drive (0x80), have also tried with a 4bytes alignment for the structure with the same result (CF 1 AH 0x01), the extensions are present.

  Read the article

• How to move the Windows 7 bootloader to the Windows 7 partition?

  - by pauldoo

  I recently installed Windows 7 in a triple boot setup alongside XP and Linux. When I was finished and was in the process of restoring the bootloader for Linux I discovered something strange about what Windows 7 had done. I discovered that Windows 7 had not installed a bootloader to it's own partition, and instead had instead set up a bootloader on the pre-existing XP partition that offers a choice between 7 and XP. This behaviour has been noticed by others. Now my booting is slightly odd. I have GRUB on the MBR which lets me choose between Linux and Windows. When I select Windows I have Grub boot to the XP partition where I get the 2nd choice between 7 and XP. Why doesn't the Windows 7 installer put the Windows 7 bootloader on the Windows 7 partition like all previous MS OSs? This is now going to be a real problem for me, as I now want to wipe the XP partition and install something else there (probably another non-MS OS). How can I move the bootloader for Windows 7 onto the Windows 7 partition, thus making it bootable and allowing me to safely wipe the XP partition?

  Read the article

• Looking for fast, minimal, preferrably free disc cloning software [closed]

  - by Dave

  We have to test our application installation and functionality on many Windows operating system versions and languages (XP, Vista, Win7; English, Spanish, Portuguese, etc; 32-bit & b4-bit.) While we can do much of this in virtual machines, we have noticed that VM's sometimes hide problems, or raise false bugs. So, we need to do "bare metal" OS installation for much of our testing. I have been using Acronis True Image for the past year, and am not impressed. It often gives random errors which require a reboot, and is really slow. For example, when trying to restore an image, it goes through a "Locking partition" cycle about three times (once after you click OK on each step of the wizard), each of which can take 5 minutes to complete. This all happens BEFORE it actually starts the image copy, which is sometimes quick (3-5 minutes), sometimes long (hours). The size of all of our images are roughly the same, so that is not related. So, anyway, I'm looking to switch to something else: I only need very basic functionality--just creating images of entire discs, and then restoring those images onto the exact same hard drive at a later date. That's it. I'm not opposed to paying for a good piece of software, but if there is something free out there that does the job well, that would be a preference. My OS on which the imaging software would run is Windows Vista, but a bootable media (into a Linux flavor) would be fine also, as long as its quick to use and reliable. Recommendations? (Also, moderators, if this should be a CW, I'll be happy to mark it as such; unclear about the rules there.)

  Read the article

• Building a custom Linux Live CD

  - by Mike Heinz

  Can anyone point me to a good tutorial on creating a bootable Linux CD from scratch? I need help with a fairly specialized problem: my firm sells an expansion card that requires custom firmware. Currently we use an extremely old live CD image of RH7.2 that we update with current firmware. Manufacturing puts the cards in a machine, boots off the CD, the CD writes the firmware, they power off and pull the cards. Because of this cycle, it's essential that the CD boot and shut down as quickly as possible. The problem is that with the next generation of cards, I have to update the CD to a 2.6 kernel. It's easy enough to acquire a pre-existing live CD - but those all are designed for showing off Linux on the desktop - which means they take forever to boot. Can anyone fix me up with a current How-To? Update: So, just as a final update for anyone reading this later - the tool I ended up using was "livecd-creator". My reason for choosing this tool was that it is available for RedHat-based distributions like CentOs, Fedora and RHEL - which are all distributions that my company supports already. In addition, while the project is very poorly documented it is extremely customizable. I was able to create a minimal LiveCD and edit the boot sequence so that it booted directly into the firmware updater instead of a bash shell. The whole job would have only taken an hour or two if there had been a README explaining the configuration file!

  Read the article

• Install Problem (Ubuntu Server 10.04) with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option! Help

  - by Alastair

  We cannot seem to install Ubuntu Server with USB as it reboots when I hit 'enter' for 'Install Ubuntu Server' option. My friend wants to try setting up a server so; we downloaded Ubuntu Server 10.04.4 we created a boot CD and installed ubuntu server no problem at all. But then the problem arose the hardrive we wanted to use is a 1tb sata drive and the computer orginally has 40gb IDE. So I bought a Sata to IDE and IDE to Sata converter from: http://www.microdirect.co.uk/Home/Product/52926/IDE-to-SATA-converter---Converts-IDE-HDD-to-SATA-inc-sata-data-and-power-cables Unfortunately this converter means I cannot plug in the IDE cable meaning I only have one IDE connection i.e CD drive has to be disconnected for the 1tb sata Hardrive to be connected. So now the 1tb drive is connected, powered it on opened the bios to make sure the hdd appeared it did as ST3ASDAPFKG (somthing like that). Fortunately the computer supports USB booting, so I read ubuntu server usb install instructions I tried: Startup Disk Creator & Unebootin Startup Disk Creator made the usb bootable with the 'ubuntu-10.04.4-server-i386.iso' All looked fine stuck the usb drive in, booted the machine up and I am quickly presented with ubuntu language choice. I hit enter to select English then I am presented with: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system I can move up and down the menu fine everything seems ok, I select 'Install Ubuntu Server', computer just hangs and screen either goes blank or locks. So I rebooted the computer loads the same menus fine, I select 'Install Ubuntu Server' hit 'enter' and the computer just restarts then brings me back to the same menu. hmmm Then I tried choosing the rest of the options separately: Install Ubuntu Server, Install Ubuntu Enterprise Cloud, Check Disk for defects, test memory, Boot from first hard disk, Rescue a broken system computer just restarts and back to the same ubuntu menu every-time. Grrrr At this point I wish I actually new how to command line install or something but I don't have a clue how to do that. So I tried hitting 'f6' for 'other options' and I tried them all in various combinations and individually. No Luck: (Expert mode, acpi=off, noapic, nolapic, edd=on, nodmraid, nomodeset, Free Software only) At this point I am wondering if it is a bios setting causing problems, I tried turning every option in there on off that I don't understand. No Luck. I then discovered by accident if you hit esc in the ubuntu install menu it says "you are leaving the graphical boot menu and starting the text mode interface" I hit 'Ok'. Next a prompt pops up saying 'boot:' One time it responded when I typed somthing with 'Cannot find kernal image (something like that but since then it just restarts when I hit enter in that prompt). I had a browse on the net and found someone suggesting removing quiet from install command for 'Install Ubuntu Server'. Made no difference at all just reboots... Orginal boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz quiet -- Modified boot options noprompt cdrom-detect/try-usb=true persistent file=/cdrom/preseed/ubuntu-server.seed initrd=/install/initrd.gz -- Still I cannot install Ubuntu Server by USB as it, reboots when I hit 'enter' for 'Install Ubuntu Server' option. This is a real pain as we cannot take the 1tb Sata Hardrive and swap it for IDE to be able to use the cd drive. Why is is it so hard to install ubuntu server with usb? I have wasted a full day and half on this really frustrated any help would be amazing! I know the answers out there just seems a bit illusive at the moment! Computer Spec- Asus Motherboard, 1gb RAM 2X512MB, Powersupply 200watt, 2.8ghz Processor Intel, On-board 64mb graphics, 100mb Ethernet, 54mb Wireless,

  Read the article

• Clone a Hard Drive Using an Ubuntu Live CD

  - by Trevor Bekolay

  Whether you’re setting up multiple computers or doing a full backup, cloning hard drives is a common maintenance task. Don’t bother burning a new boot CD or paying for new software – you can do it easily with your Ubuntu Live CD. Not only can you do this with your Ubuntu Live CD, you can do it right out of the box – no additional software needed! The program we’ll use is called dd, and it’s included with pretty much all Linux distributions. dd is a utility used to do low-level copying – rather than working with files, it works directly on the raw data on a storage device. Note: dd gets a bad rap, because like many other Linux utilities, if misused it can be very destructive. If you’re not sure what you’re doing, you can easily wipe out an entire hard drive, in an unrecoverable way. Of course, the flip side of that is that dd is extremely powerful, and can do very complex tasks with little user effort. If you’re careful, and follow these instructions closely, you can clone your hard drive with one command. We’re going to take a small hard drive that we’ve been using and copy it to a new hard drive, which hasn’t been formatted yet. To make sure that we’re working with the right drives, we’ll open up a terminal (Applications > Accessories > Terminal) and enter in the following command sudo fdisk –l We have two small drives, /dev/sda, which has two partitions, and /dev/sdc, which is completely unformatted. We want to copy the data from /dev/sda to /dev/sdc. Note: while you can copy a smaller drive to a larger one, you can’t copy a larger drive to a smaller one with the method described below. Now the fun part: using dd. The invocation we’ll use is: sudo dd if=/dev/sda of=/dev/sdc In this case, we’re telling dd that the input file (“if”) is /dev/sda, and the output file (“of”) is /dev/sdc. If your drives are quite large, this can take some time, but in our case it took just less than a minute. If we do sudo fdisk –l again, we can see that, despite not formatting /dev/sdc at all, it now has the same partitions as /dev/sda.  Additionally, if we mount all of the partitions, we can see that all of the data on /dev/sdc is now the same as on /dev/sda. Note: you may have to restart your computer to be able to mount the newly cloned drive. And that’s it…If you exercise caution and make sure that you’re using the right drives as the input file and output file, dd isn’t anything to be scared of. Unlike other utilities, dd copies absolutely everything from one drive to another – that means that you can even recover files deleted from the original drive in the clone! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDHow to Browse Without a Trace with an Ubuntu Live CDRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu 9.10 USB Flash DriveWipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

  Read the article

• Fill a Flash Drive with Portable Software using Lupo PenSuite

  - by Asian Angel

  A flash drive full of portable software is helpful to have along wherever you go. The Lupo PenSuite lets you choose from three different versions to get the best fit for your everyday needs. Note: If running the full version you will need a 512 MB USB flash drive or larger. Using Lupo PenSuite The one window to watch for during the setup process is where you have the opportunity to add a specific language pack if needed. Outside of that all that you need to do is sit back and wait for the suite to be extracted. Note: Extraction times will vary based on version and extraction location. Here we browsed to our flash drive to extract it to… Once the setup process is complete locate and double click the Lupo_PenSuite.exe file. This one time window will present you the opportunity to start using the suite immediately, or go directly into the options. When the suite is active you will have a new system tray icon that operates as a start menu button. At the bottom you can monitor the remaining room on your flash drive, and use the close button to exit the suite (may display as a power button based on menu theme). A quick look at the set up inside the suite. There is a pre-configured area for organizing and storing your personal files. Prefer a classic style menu? Just select for it in the options (various tab) and enjoy a smaller streamlined look. Note: You can also change the theme for the regular menu and add a user pic. The suite provides access to your portable software and online sites. You get to enjoy the best of both as shown in the following examples. Websites will open using the suite’s portable Firefox install. VLC is ready to play your downloaded videos. The suite also has some very nice photo editing programs added in. Installing Additional Apps If one of your favorite programs is not included in the suite version, it only takes a few minutes to add it in. Go to the Additional Apps webpage, download the app(s), and extract them onto your hard-drive. Note: Link for additional apps webpage provided below. Add the extracted app(s) to the MyApps folder in the suite’s folder hierarchy. Click on ASuite in the suite’s start menu. Drag and drop the portable app’s exe file into the MyApps section in the ASuite window. Your new software’s shortcut should display as shown here. Close this window when finished. Checking the suite’s start menu will show your new software ready to be used. Conclusion If you need a good portable software collection to carry with you on a flash drive then Lupo PenSuite is definitely worth taking a look at. We tested Lupo PenSuite on XP, Vista, and Windows 7 and it works great on all three. Another popular choice is PortableApps and you can check out our Review of that too they are essentially the same thing, each is just packaged differently. Links Download Lupo PenSuite (Full, Lite, & Zero versions) *Download links approximately one-third down the page. Download Additional Apps for Lupo PenSuite Download Additional Skins for Lupo PenSuite Start Menu View Video Tutorials *Has tutorial for easy updating of entire suite. Similar Articles Productive Geek Tips Install and Run Applications from Your iPod, Flash Drive or Mp3 PlayerRebit Backup Software [Review]BitLocker To Go Encrypts Portable Flash Drives in Windows 7Create a Bootable Ubuntu USB Flash Drive the Easy WaySpeed up Your Windows Vista Computer with ReadyBoost TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor

  Read the article

• Dual boot Ubuntu and Windows 7, I Can only boot ubuntu through recovery mode

  - by Alec

  I want to become a new user of Ubuntu, however this problem is preventing me. I have/had Window 7 professional on my computer. I recently looked into getting linux. I discovered dual-booting and decided to give it a try. First I created a bootable flash drive with ubuntu 12.10 64 bit. I then followed the instructions on: https://help.ubuntu.com/community/WindowsDualBoot after I finished going through the setup, my computer rebooted. After the reboot I was able to select Ubuntu, advanced options for Ubuntu, 2 memory tests, and windows 7 (loader). So I chose Windows ( honestly i was more concerned that i still had everything on windows at this point). I then rebooted again and selected Ubuntu. When i selected Ubuntu, the background screen of Grub (the crimson/burgandy color) stayed for a few seconds then the screen went black: video here http://www.youtube.com/watch?v=6kKcG4sT7Lg&feature=plcp I tried again with the same results. so i redid the ubuntu install differently using http://www.liberiangeek.net/2012/10/dual-booting-windows-7-and-ubuntu-12-10-quantal-quetzal/. After rebooting the same thing happened. After that i was stumped, so i figured it could hurt to experiment. after all i backed up my windows 7 stuff, and i have the software disk. I tried booting in recovery mode under "advanced options for Ubuntu" and sure enough, after selecting continue to normal reboot it worked. So i updated and everything but when i rebooted it still wouldn't boot under Ubuntu. It would always boot after recovery mode. So i try installing 12.10 32 bit Ubuntu. the same problem keeps happening. I can still get to Ubuntu through recovery mode. so i went online and tried using the terminal (in ubuntu that i booted through recovery mode) when i was using it i discovered that "Error in sitecustomize; set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected" kept showing up. also i noticed a notification in the top right corner that looked like a do not enter sign. it said "an error occured, please run package manager from the right-click menu or apt-get in a terminal to see what is wrong. the error message was: 'ror in sitecustomize;set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected traceback (most recent called last): File "/usr/bin/lsb_release EOFError: EOF read where not expected 39;0' this usually means that your installed packages have unmet dependencies" Naturally i assumed this was what was causing my boot problems. I downloaded synaptic and updated everything and the error went away. but my boot problem was still a problem. so i go online find some things that have worked for others, like this Try to do this (in your terminal: sudo nano /etc/default/grub Look for: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" Change it too : GRUB_CMDLINE_LINUX_DEFAULT="quiet" And update Grub: sudo update-grub This should fix stuff.) I did this and i still have the problem. sorry for the excessive explanation, please help.

  Read the article

• OS Development. Only Few Particular Questions

  - by Total Anime Immersion

  I am new to this site as a member but have consulted its answers quite a lot of times. Besides my questions regarding OS Development hasn't been answered in any forum. In OS Dev. we make a bootloader. The org point is 7C00H. Why so? Why not 0000h? What are the last two signatures in the bootloader used for? People on every forum have answered that it is important for the system to recognize it as a bootable media. But I want a specific answer. What do each of those signatures do. I have the basic concept of a kernel. Point is.. it relates to different files required in a system. It sort of binds up everything that is individually developed. Now the thing is that that I have floating ideas in my mind regarding different aspects like keyboard, mouse, etc.. how do I put them all together? Which should I start with first? If possible please provide a step by step procedure of the startups of the kernel. Suppose I have developed my language entirely in C and Assembly. Now questions is will exe files work on my system.. if it doesn't then I have to create my own files and publish them. Which is a bad idea.. next step would be for me to go for a compiler for a language which I have designed myself. Now the point is.. How do I implement the compiler into my OS? After all this my final question is that.. How do you go about multitasking and multithreading? and I don't want to use int 21h as its dos specific.. how do I go about making files, renaming them, etc. and all assembly books teach 16 but programming.. how do i go about doing 32 bit or 64 bit with the knowledge I have.. if the basics and instructions are the same.. I don't mind.. but how do i go about otherwise? Don't tell me to give up the idea because I WON'T. And don't tell me it's too complex because I have a sharp knowledge of working of a system, C, Java, Assembly, C++ and python, C#, visual basic.. and not just basics but full fledged api developments.. but I really want to go deep into the systems part.. so I want professional help.. And I have gone through many OS project files but I want help particularly from this site as there are people with knowledge depth who can guide me the right way. And please don't suggest any books above 20$ and they should be available on flipkart as amazon charges massively for shipping and I prefer free shipping from flipkart.

  Read the article

• What packages do I need to compile .tex documents using XeLaTeX?

  - by maria

  Hi I'm aware of the existence of similar threads on this forum. But any of replies mach to my problem. I'm using Ubuntu 10.4 and I hadn't problems with fonts till I've decided to use XeLaTeX instead of LaTeX (cf http://tex.stackexchange.com/questions/12347/typesetting-a-document-using-arabic-script/12358#12358). The problem is that I'm not able to compile any .tex document using XeLaTeX, as well as properly display XeLaTeX documentation. As I've learn thanks to mentioned thread, XeLaTeX uses the fonts availables in general in the system. I was trying yo read fontspec documentation, but it opens in pdf with a lot of white gaps and terminal output (quite long) consist mostly of errors. This are just few lines of it: Error: Missing language pack for 'Adobe-Japan1' mapping Error: Unknown font tag 'F5.1' Error (24124): No font in show Error: Unknown font tag 'F5.1' I was trying to compile simple XeLaTeX file: \documentclass{article} \usepackage{fontspec} \setmainfont{Linux Libertine O} \begin{document} Hello World! \end{document} without succes. This is terminal output of compilation: This is XeTeX, Version 3.1415926-2.2-0.9995.2 (TeX Live 2009/Debian) restricted \write18 enabled. entering extended mode (./ex.tex LaTeX2e <2009/09/24> Babel <v3.8l> and hyphenation patterns for english, usenglishmax, dumylang, noh yphenation, polish, loaded. (/usr/share/texmf-texlive/tex/latex/base/article.cls Document Class: article 2007/10/19 v1.4h Standard LaTeX document class (/usr/share/texmf-texlive/tex/latex/base/size10.clo)) (/usr/share/texmf-texlive/tex/xelatex/fontspec/fontspec.sty (/usr/share/texmf-texlive/tex/generic/ifxetex/ifxetex.sty) (/usr/share/texmf-texlive/tex/latex/tools/calc.sty) (/usr/share/texmf-texlive/tex/latex/xkeyval/xkeyval.sty (/usr/share/texmf-texlive/tex/generic/xkeyval/xkeyval.tex (/usr/share/texmf-texlive/tex/generic/xkeyval/keyval.tex))) (/usr/share/texmf-texlive/tex/latex/base/fontenc.sty (/usr/share/texmf-texlive/tex/xelatex/euenc/eu1enc.def) (/usr/share/texmf-texlive/tex/xelatex/euenc/eu1lmr.fd)) fontspec.cfg loaded. (/usr/share/texmf-texlive/tex/xelatex/fontspec/fontspec.cfg))kpathsea: Invalid fontname `Linux Libertine O', contains ' ' ! Font \zf@basefont="Linux Libertine O" at 10.0pt not loadable: Metric (TFM) fi le or installed font not found. \zf@fontspec ...ntname \zf@suffix " at \f@size pt \unless \ifzf@icu \zf@set@... l.3 \setmainfont{Linux Libertine O} ? I can't find Linux Libertine O. Searching for otf- by aptitude gives as result: maria@maria-laptop:/etc/fonts$ aptitude search otf p emdebian-rootfs - emdebian root filesystem support p libotf-bin - A Library for handling OpenType Font - utilities p libotf-dev - A Library for handling OpenType Font - development i libotf0 - A Library for handling OpenType Font - runtime p libotf0-dbg - The libotf libraries and debugging symbols p libpam-dotfile - A PAM module which allows users to have more than one password p livecd-rootfs - construction script for the livecd rootfs p makebootfat - Utility to create a bootable FAT filesystem p otf-ipaexfont - Japanese OpenType font, IPAexFont (IPAexGothic/Mincho) p otf-ipaexfont-gothic - Japanese OpenType font, IPAexFont (IPAexGothic) p otf-ipaexfont-mincho - Japanese OpenType font, IPAexFont (IPAexMincho) p otf-ipafont - Japanese OpenType font set, IPAfont p otf-ipafont-gothic - Japanese OpenType font set, IPA Gothic font p otf-ipafont-mincho - Japanese OpenType font set, IPA Mincho font p otf-stix - the Scientific and Technical Information eXchange fonts p otf-thai-tlwg - Thai fonts in OpenType format p otf-yozvox-yozfont - Japanese proportional Handwriting OpenType font p otf2bdf - generate BDF bitmap fonts from OpenType outline fonts p robotfindskitten - Zen Simulation of robot finding kitten So font in question is not just uninstalled, but not available, if I'm not wrong. Does it mean that I lack some repositoires? I was trying also to apply solution from the thread How do I reinstall default fonts?, but the result is: maria@maria-laptop:~$ sudo apt-get install msttcorefonts [sudo] password for maria: Reading package lists... Done Building dependency tree Reading state information... Done Note, selecting ttf-mscorefonts-installer instead of msttcorefonts ttf-mscorefonts-installer is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. maria@maria-laptop:~$ It seems that is not a usual problem for use of XeLaTeX; nobody in the mentioned thread suggested instalation of anything else than TeX Live. Thanks in advance

  Read the article

• UEFI Dual-Boot - Ubuntu 12.04.3 + Windows 8.1 (One GPT HDD)

  - by swafbrother

  UEFI Dual-Boot - Ubuntu 12.04.3 + Windows 8.1 (One GPT HDD) Hello, I'm having trouble setting up a dual-boot (Ubuntu 12.04 LTS and Windows 8.1) in my ASUS K55VM laptop's hard drive disk (500 GB). I was mostly following tutorials for doing this, but at some point something has gone wrong. Up to now, I have followed these steps: I formatted my HDD into GPT. I clean-installed Windows 8.1. I didn't prevent Windows from choosing the partitions to use and it created these partitions: A Recovery partition (sda1). An EFI System Partition (sda2). A Microsoft Reserved Partition (sda3). A Windows Data Partition or C drive (sda4). I reduced the Windows Data Partition via Windows' Disk Management. I made a bootable USB Stick with Ubuntu 12.04 LTS from ISO, using Universal USB Installer. I created these partitions for Ubuntu: A Boot partition, mounted at /boot (sda5). A Root partition, mounted at / (sda6). A Swap partition (sda7). In Device for boot loader installation I chose: /dev/sda. Then, when I rebooted, it went straight into Ubuntu. So I installed Boot-Repair, and clicked on Recommended Repair. It automatically did its job without asking for anything. I rebooted and Grub showed up, with a lot of options. At this point I had a decent dual-boot setup; Ubuntu and both Windows entries worked fine: Ubuntu. Windows Boot UEFI Loader. Windows UEFI bkpbootmgfw.efi. I executed this command: sudo grub-install --force /dev/sda5. Then I tried to make Windows 8.1's Boot Manager the main boot manager, so that I could choose which OS to boot into from a menu. I downloaded EasyBCD on Windows. It showed 2 Ubuntu entries and 1 Windows entry. I went into BCD Deployment tab and clicked on Write MBR. At this point, I went into BIOS and made Windows Boot Manager the first boot option. When I rebooted, I got a black screen with the message efidisk read error, and then (I guess) it switched to the next boot option, which is Ubuntu, resulting in Grub showing up. From Grub, Ubuntu entry is working and so are both Windows entries. If I choose Ubuntu, it normally boots into Ubuntu. But if I choose Windows, it goes into Windows' boot manager. In Windows' boot manager, a menu shows up: Ubuntu. Ubuntu. Windows 8.1. If I choose Windows, it boots into Windows without any problem. If I choose Ubuntu, it boots into Grub (back to step 14). Here's my BootInfo Summary: http://paste.ubuntu.com/6698171/ Windows Boot Manager is clearly not working as expected; I can't directly boot into it and I can't boot into it from BIOS either (efidisk read error again). If I want to boot into Windows I need to boot into Grub first, which is the opposite of what I wanted. I need help at this point. What is the best thing I can do? Is there a more reliable and/or simpler way of acomplishing a satisfying dual-boot for this situation? Can someone provide a way for going back to step 8, where I had a more efficient dual-boot setup? If only I could undo what I did with Easy BCD and skip Windows' Boot Menu... Can someone provide a way to fix this mess? Thanks in advance and sorry for the length of this, I wanted to be exhaustive.

  Read the article

• Converting a PV vm back into an HVM vm

  - by wim.coekaerts

  I have been doing some Oracle VM benchmark stuff in the last week or 2 in my off hours and yesterday I wanted to convert one of my VMs that was based on a paravirt kernel into a vm that just boots as a regular hardware virt VM with a standard x86-64 kernel. It took me a little while to figure out the fastest way so now that I have it pretty much down I wanted to share the steps. A PV kernel uses pygrub and a paravirt kernel image that lives on the vm image virtual disk. since this disk image does not have to be bootable it doesn't contain a boot sector and if you just restart the VM in hvm mode the virtual bios will just not do much as it can't start the boot process from disk The first thing I do is make a backup of my vm.cfg file :-) and then edit it as follows : the original file contains : bootloader = '/usr/bin/pygrub' I replace that with : acpi = 1 apic = 1 builder = 'hvm' device_model = '/usr/lib/xen/bin/qemu-dm' kernel = '/usr/lib/xen/boot/hvmloader' then changing the disk files. I change my xvd disks to hd disks and I copy over the iso image of my instal lDVD. In the case of my VM template it was based on OL5U4 So I downloaded Enterprise-R5-U4-Server-x86_64-dvd.iso and added it as a cd device. disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,xvda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,xvdb,w', ] to disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,hda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,hdb,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Enterprise-R5-U4-Server-x86_64-dvd.iso, hdc:cdrom,r', ] boot='d' for the network devices (vifs) I change : vif = ['bridge=xenbr2,type=netfront'] to vif = ['bridge=xenbr2,type=ioemu'] That should do it. Next, inside the VM, I copy over the regular kernel rpm that I want to end up running in hvm mode. In this example case it was : kernel-2.6.18-164.0.0.0.1.el5.x8664.rpm. I will use that later on in the process. I put this kernel simply in /root At this point I just start the vm with xm create vm.cfg and start my vnc console to the vm console. Oracle Linux will boot from the iso image, I just go through the install steps and click on UPgrade existing (not re-install). Because the VM is the same as the ISO the install won't actually do anything and it will run through instantly. When the "Reboot" button pops up, don't reboot. Switch to the command prompt console. hi alt-f2 to go to the shell prompt. Now it's easy : umount /mnt/sysimage/boot cd /mnt/sysimage chroot . mount /dev/hda1 (if that was your /boot partition) export PATH=/sbin:$PATH (just to clean that up) edit /etc/modprobe.conf and comment out the xen modules (just put a # in front) Install grub. if your /boot is hda1 then that is (hd0,0) $ grub root (hd0,0) setup (hd0) exit grub now you have a good bootsector, grub installed and you have your grub.conf file Install the new kernel cd root (this is your old /root in your pv image) rpm -ivh remove (or comment out) boot='d' in your vm.cfg restart the VM and you should be good to go, regular grub should start and load your environment. Caveats : this assumes you used labels for your filesystems. if /etc/fstab were to have devices listed then you would have to rename these device before rebooting as well. If you had a /dev/xvda disk then this would be /dev/hda or /dev/sda. All in all it is a relatively short and simple process.

  Read the article

• Converting a PV vm back into an HVM vm

  - by wim.coekaerts

  I have been doing some Oracle VM benchmark stuff in the last week or 2 in my off hours and yesterday I wanted to convert one of my VMs that was based on a paravirt kernel into a vm that just boots as a regular hardware virt VM with a standard x86-64 kernel. It took me a little while to figure out the fastest way so now that I have it pretty much down I wanted to share the steps. A PV kernel uses pygrub and a paravirt kernel image that lives on the vm image virtual disk. since this disk image does not have to be bootable it doesn't contain a boot sector and if you just restart the VM in hvm mode the virtual bios will just not do much as it can't start the boot process from disk The first thing I do is make a backup of my vm.cfg file :-) and then edit it as follows : the original file contains : bootloader = '/usr/bin/pygrub' I replace that with : acpi = 1 apic = 1 builder = 'hvm' device_model = '/usr/lib/xen/bin/qemu-dm' kernel = '/usr/lib/xen/boot/hvmloader' then changing the disk files. I change my xvd disks to hd disks and I copy over the iso image of my instal lDVD. In the case of my VM template it was based on OL5U4 So I downloaded Enterprise-R5-U4-Server-x86_64-dvd.iso and added it as a cd device. disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,xvda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,xvdb,w', ] to disk = ['file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/System.img,hda,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Oracle11202RAC_x86_64-xvdb.img,hdb,w', 'file:/ovs/OVM_EL5U4_X86_64_11202RAC_PVM/Enterprise-R5-U4-Server-x86_64-dvd.iso, hdc:cdrom,r', ] boot='d' for the network devices (vifs) I change : vif = ['bridge=xenbr2,type=netfront'] to vif = ['bridge=xenbr2,type=ioemu'] That should do it. Next, inside the VM, I copy over the regular kernel rpm that I want to end up running in hvm mode. In this example case it was : kernel-2.6.18-164.0.0.0.1.el5.x8664.rpm. I will use that later on in the process. I put this kernel simply in /root At this point I just start the vm with xm create vm.cfg and start my vnc console to the vm console. Oracle Linux will boot from the iso image, I just go through the install steps and click on UPgrade existing (not re-install). Because the VM is the same as the ISO the install won't actually do anything and it will run through instantly. When the "Reboot" button pops up, don't reboot. Switch to the command prompt console. hi alt-f2 to go to the shell prompt. Now it's easy : umount /mnt/sysimage/boot cd /mnt/sysimage chroot . mount /dev/hda1 (if that was your /boot partition) export PATH=/sbin:$PATH (just to clean that up) edit /etc/modprobe.conf and comment out the xen modules (just put a # in front) Install grub. if your /boot is hda1 then that is (hd0,0) $ grub root (hd0,0) setup (hd0) exit grub now you have a good bootsector, grub installed and you have your grub.conf file Install the new kernel cd root (this is your old /root in your pv image) rpm -ivh remove (or comment out) boot='d' in your vm.cfg restart the VM and you should be good to go, regular grub should start and load your environment. Caveats : this assumes you used labels for your filesystems. if /etc/fstab were to have devices listed then you would have to rename these device before rebooting as well. If you had a /dev/xvda disk then this would be /dev/hda or /dev/sda. All in all it is a relatively short and simple process.

  Read the article

• XenServer 6.0.2 path to installation media contains non-ascii characters

  - by cmaduro

  XenServer 6.0.2 install fails no matter what I do. I have confirmed that the md5 checksum on my ISO file is good. I tried installing from a mounted ISO file (remotely via iKVM). I tried installing from physical media. I tried installing from a bootable USB stick (using syslinux + contents of the ISO) All attempts have yielded the same result: When verifying the installation media, at 0% initializing, the following is reported: "Some packages appeared to be damaged." followed by a list of pretty much all the gz2 and rpm packages. If I skip the media verification the installer proceeds and then gives me an error when it reaches "Installing from base pack" at 0% which states "An unrecoverable error has occurred. The error was: 'ascii' codec can't decode byte 0xff in position 20710: ordinal not in range(128) Please refer to your user guide, or contact a Technical Support Representative, for further details" there is one option left which is to reboot. Apparently at some point during the processing of the repositories on the installation media non-ascii characters are found, which causes the installer to quit. How do I fix this? Here are my specs TYAN S8236 motherboard 2 AMD Opteron 6234 processors LSI2008 card connected to 2 1TB Seagate Constellation drives SATA, 1 500GB Corsair m4 SSD SATA and 1 Corsair Forse 3 - 64GB SSD SATA Onboard SATA connected to a slim DVD-+RW. Onboard SAS connected to 2 IBM ESX 70GB 10K SAS drives (for XenServer) 256GB memory ================================================================================= Comments: According to pylonsbook.com "chances are you have run into a problem with character sets, encodings, and Unicode" – cmaduro 10 hours ago A clue is provided by "vmware.com/support/vsphere5/doc/…; Data migration fails if the path to the vCenter Server installation media contains non-ASCII characters When this problem occurs, an error message similar to: 'ascii' codec can't decode byte 0xd0 in position 30: ordinal not in range(128) appears, and the installer quits unexpectedly during the data migration process. – cmaduro 10 hours ago This is an error that python throws. And guess what, the .py extention of the file you have to edit in this link community.spiceworks.com/how_to/show/1168 means the installer is written in python. Python is interpreted, so now to find the install file responsible for this error. – cmaduro 6 hours ago The file that generates the error upon verification is /opt/xensource/installer/tui/repo.py. The error message appears around line 359. – cmaduro 2 hours ago I am fairly sure that the install error is generated somewhere in repository.py as the backend.py file throws errors while methods in that file are being called. Perhaps all errors can be traced back to this file. – cmaduro 1 hour ago

  Read the article

• Windows 7 + Deep Freeze - I'm stuck in an endless reboot loop

  - by myermian

  I have the following setup: Windows 7 Ultimate Deep Freeze I "thawed" my machine last night and performed a Windows Update. The update is having issues (it gets stuck at 32%, fails, and restarts my machine). When it reboots it attempts it again, and again, and again, etc. (Endless loop). I looked online and found some solutions, but none of them seem to be working: When I run Safe Mode, Safe Mode w/ Network, or Safe Mode w/ Command Prompt it attempts to revert the Windows Update changes. However, the problem is with Deep Freeze on (and now in "Frozen" mode) the reverted changes don't stay, and I'm back into the loop of death. Oh, and side note: "Safe Mode w/ Command Prompt" does not actually take me to a command prompt window? Perhaps because it is attempting to complete the Windows Update changes first? I have tried to select the option to NOT restart when an windows error occurs, but it still does. I tried the remainder of all the other options in the F8 screen. The only other option left is to find my Windows 7 Media Disc (I can't find it right now) and use it to repair windows (because for some reason the repair option does not show up in the F8 screen). Is there a way to disable Deep Freeze from loading? When I selected "Safe Mode w/ Command Prompt" I noticed that it loads the DpFrz.sys file. I know that when I'm in the Windows Boot Manager if I press F10 instead of F8 (while highlighting Windows 7) it takes me to an "Edit Boot Options" screen: Edit Windows boot options for: Windows 7 Path: \Windows\system32\winload.exe Partition: 2 Hard Disk: 8e90e329 [ /NOEXECUTE=OPTIN (I CAN EDIT THIS LINE) ] Update: I found my Windows 7 Media Disk and it did not help out. The laptop had the "System Restore" as a partition on the HDD. I later received (in the mail) a Windows 7 Upgrade Disc from Sony to upgrade my system from Windows Vista to Windows 7 Ultimate. I placed the disc into the DVD drive and it does not come up as a "bootable" disc. I'm going to try to find an alternative disc to see if I can get into Command Prompt. Update 2: I got a Windows Repair disc and got into a command prompt window. I got into the registry and disabled Deep Freeze. Also: I renamed the Pending.xml file to Pending.old I cleared out the Windows Temp directory I still am stuck in the loop (though, it isn't an issue with DeepFreeze anymore because I can make changes to the hard drive and they persist). Not sure what to do at this point? Update 3: I ran the repair option and it couldn't repair, but it did point me to something. It says the error was due to a driver that was failing. I have a feeling it is my UPEK Fingerprint scanner.

  Read the article

• Adaptec 5805 after reboot don't starting

  - by Rakedko ShotGuns

  After rebooting the system, the controller is not included. It only works if the computer is shut down and turn off. Late i update firmware "Adaptec RAID 5805 Firmware Build 18948" How to fix the problem? add Log Configuration summary Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priorityHigh Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1 List item

  Read the article

• Ubuntu Newbie Needs Assistance!!

  - by Steve Greene

  New Ubuntu User Needs Help!- version 9.10 does not communicate with laptop Hello folks, Several days ago, I installed Ubuntu 9.10 onto my Acer Aspire 3100 laptop, running it alongside Widows Vista as a dual-bootable system. Creation of the Ubuntu boot CD went fine, and the installation onto my hard drive was flawless. Ubuntu opens and behaves as I would expect, except for one little problem. For reasons unknown to me, Ubuntu is not communicating with my laptop's networking hardware, and I have no internet connectivity, even when sitting directly under the wireless router at the local library (literally), which puts out a wickedly-fast signal that my Windows Vista OS auto-detects and immediately connects to. Up in the right side of the Ubuntu desktop, I click on the network icon and it does not show a wireless connection at all, even though I am only a few feet from the router. At home, where I use a dialup modem, I also see no means of getting online. My modem is an HDAUDIO Soft Data Fax Modem with Smart CP,manufactured by CXT (Conexant Systems Inc., file version 4.0.13.0, and the driver version is 7.58.0.0). I desparately wish to convert to Ubuntu. I used Mac for ten years, and then Windows for ten years. Now, after 20 years, I want to live out my days as an open-source Ubuntu fanatic. I am ready to give the old status quo the boot! I am an advanced computer user, but I am not a programmer. I seek a solution that is user-friendly for normal people, something equivalent to a driver that I can easily install or activate that will allow Ubuntu to see my hardware and get me connected. Can anyone help me over this hopefully-little glitch so that I can move on in total Ubuntu bliss? My processor is a Mobile AMD Sempron Processor 3500+ at 1.80 GHz, 1.50 GB RAM, and a 32-bit Operating System. I am running Windows Vista Home Basic, Service Pack 2. My current email is [email protected] if you have a workable solution that does not require programmer status to implement. Surely this must be a simple fix that I simply am overlooking, but being the new guy on the block, I have yet to be enlightened. Thanks for your help in coming up to speed!! Steve Wanna' be Ubuntu Fanatic "If you're not living on the edge, you're taking up too much space."

  Read the article

• Preinstalled Windows 8 and Linux UEFI dual boot on a laptop

  - by itchy355

  I am trying to set up Windows 8 and Arch Linux on a new Sony Vaio E14 with preinstalled windows 8. So far: installed W8 to my new SSD (switched for the original HDD) using Recovery Media shrunk the W8 partition, deleted recovery partition, disabled swap confirmed W8 booting just fine On to Arch: disabled Secure Boot in bios confirmed W8 booting just fine Booted Arch off the CD and installed everything to 4th and 5th partition set up rEFInd for EFIstub kernel bootloader After that it got worse. I was unable to boot anything else than Windows 8 (although I was glad that they at least kept working just fine). Tried: creating EFI\refind\ and putting the .efi there (as per Arch manual overwriting EFI\boot\bootx64.efi overwriting EFI\Microsoft\Boot\bootmgr.efi overwriting EFI\Microsoft\Boot\bootmgfw.efi --- YAY rEFInd shown up! So far, so good. I've kept the whole W8 Boot\ directory in EFI\windows8 and set up a boot menuentry for it; and it booted just fine. But, upon restart, everything was wrong -- 'Operating system not found' instead of any bootloader (refind or w8). Booted back into Arch using the live CD to find out that the EFI partition had erroneous FAT table. fsck.vfat fixed it, and I've found that EFI\Microsoft\Boot was back to it's original state (all refind files deleted and replaced with W8 bootloaders). I've overwritten them again and got back to rEFInd showing up correctly and Arch being perfectly bootable. After that I've tried only renaming EFI\Microsoft\Boot\bootmgfw.efi to bootmgfw.001.efi (then copying refind's .efi to bootmgfw.efi and keeping EVERY OTHER file as it was), but with exactly the same result. Tried marking the GPT EFI partition as read-only, same result. Now I'm kinda out of luck. Arch boots fine, so does W8 but it destroys the EFI partition in the process. Thanks for any ideas, Googling brought me this far and I can't find any better. PS -- windows 8 MAYBE destroys the partition upon shutdown -- when I order a shutdown in W8, it takes unusually long (about half a minute instead of ~5 seconds). So in theory I could solve this by hard-resetting the laptop instead of a normal shutdown, but that's just not nice.

  Read the article

• Impossible to create/format install window 7 on unpartioned HD

  - by fra pet

  Hi guys i am getting nut reinstalling windows 7 on one of those Acer aspire all-in-one... The original OS(windows professional x64) was not starting, after the initial screen the bios was prompted. So step 1: i tried to access the system partition and reinstall everything but could not get at the point step 2: i set the bios to native ide and i tried to insert my original copy of windows professional and do a clean installation, but it does not allow me to format/create other partion form the installation mask step 3: my BAD, i tried to install ubuntu and i clean the whole hard drive, i was getting an error at some point during installation so i decided to get back to windows step 4: Windows 7 again, at the disk screen of the windows installation i entered into the prompt and played around with DISKPART... -i listed the disk and the HD was disk 0. -i selected disk 0. -i CLEAN disk 0 successfully. -i tried to create a CREATE PARTITION PRIMARY but gave an error cache corrupt and disk not up-to-date (after i try to create a partiton in disk 0 it disappear when i try LIST DISK and i have to restart before he can list DISK 0 again, RESCAN did not worked). -tried CLEAN ALL(2 hours) and succeeded. -try again to create primary partition and failed, same errors -try to install my old copy of windows xP pro and it seems to work, it create a partition, format(only quick worked, slow mode was at 0% after 1 hour so i stop), it start installing and around 90% installation said it could not copy a file and he stop -back on windows 7 again, it says that the hard drive has 490+gb unpartitioned but won't create a partition and format. -i tried again DISKPART as i though i messed up with the MBR when i installed ubuntu, so i did all of the instruction below http://www.sevenforums.com/tutorials/20864-mbr-restore-windows-7-master-boot-record.html http://support.microsoft.com/kb/927392 the errors were: on bootsect: the systne partiton was not found, Data error cyclic redundancy check on bootrec /FixMbr: A device attached to the system is not functioning but did not worked, and still can not partiton/format/install on a blank HD i tried some bootable clean disk tool and start infinite loop on the same errors the bios setting are: sata: native ide. if i put AHCL(or something like that does not load the HD and the DVD). quick start/quite start: disabled. Are there any other option or tools i can try before i try change the HD(That is my last option)? Thanks to everyone.

  Read the article

• installing windows XP in Samsung SENS 145 plus notebook (no CD drive)

  - by user13267

  Hi I was trying to install Windows XP in a Samsung SENS 145 plus Notebook. It does not have a cd drive and I already managed to format it and semi install Windows XP, so now it does not even boot up either. This is what I did: Since it supports USB booting, I first made a bootable USB of Windows XP (Korean version; SP2 I think, may be SP 3) using Novicorp WinToFlash enter link description here. It managed to boot up at first and I was able to format the C driveand get Windows install to start up. It took forever to copy all the files from the USB and after the first reboot, before installation started, I cancelled the reboot from windows install, went to BIOS and changed the boot device priority from USB to internal hard drive. But now on bootup it showed me a list with two options for booting windows XP (much like in the case of a multi OS system) so I assumed that I had formatted drive D by mistake and installed XP there, instead of on C drive. Anyway, I chose one of them and it continued my Windows installation. I got the blue installation screen that shows ads about Windows XP on the right frame and estimated remaining time on the left. However, after completing the process, after the first reboot, instead of showing the Windows XP logo, it says \system32\hall.dll is missing (or corrupted I'm not sure, I needed to install the Korean version of windows and I could not exactly read the error message, however it was one that I have already seen in an English version installation, and I am sure it says either missing or corrupted). The problem is, now it shows the same error again when I try to reboot it from the USB drive as well. I tried to boot a portable version of Linux I made in another USB, but the computer does not boot up from that USB, and it shows hal.dll error when I try to boot it using the WIN XP installation USB I made, as well as when I try to boot it from the hard drive, where I suppose Win XP is now semiinstalled. So now I can't get the computer to start up at all, except going to the BIOS. What else can I try to solve this? Also, would it be possible to install XP on this computer by connecting it to another one running Windows 7 ultimate, through the ethernet card? That is, network just the two computers together, then install windows XP on the notebook from the desktop running windows 7? Please help, I'm running out of ideas on this one. If Korean version of windows XP is the problem then I am willing to install English version as well. (but I need to make sure if that is the real cause of the problem)

  Read the article

• Creating a USB stick for installing centos 6.x using DVD1 and DVD2 iso files

  - by user250563

  First, we create 2 partitions on the USB stick that is let's say 16GB. first partition is let's say only 1GB and the second partition is the rest of what is available. after we "w" write the changes, the USB now has 2 partitions. 1 is 1GB 1 is more than 14GB so , we have... sdb1 and sdb2 now. now we need to turn these partitions into filesystems some say i should run these commands after those procedures. mkfs.vfat -F 32 /dev/sdb1 mkfs.ext3 /dev/sdb2 but some web pages recommend using: mkfs.vfat -n BOOT /dev/sdb1 mkfs.ext2 -m 0 -b 4096 -L DATA /dev/sdb2 which is it? so let's say the DVDs are called: CentOS-6.4-x86_64-bin-DVD1.iso CentOS-6.4-x86_64-bin-DVD2.iso so we make a directory: mkdir -p /mnt/dvd1 and then mount it: mount -o loop CentOS-6.4-x86_64-bin-DVD1.iso /mnt/dvd1 and i suppose we don't make a directory for dvd2 and we don't have to mount it ? at this point i do not know what should be done. but i think this step might be next: we make the USB bootable by finding the file named mbr.bin and then moving it to there via these commnad. dd conv=notrunc bs=440 count=1 if=/usr/lib/syslinux/mbr.bin of=/dev/sdb parted /dev/sdb set 1 boot on in other words we are "dd-ing it to 'sdb' not sdb1' or 'sdb2'. and then we use parted to set the boot to on for sdb so far everything looks good? here is the confusing parts.. how exactly do i move these iso files to the usb drive? EVERYTHING BELOW IS A GUESS. so at this point i should copy the folder /mnt/dvd1/isolinux to usb's sdb1 or sdb2 ? rename it to syslinux ? and then inside this syslinux folder there will be a file called... isolinux.cfg ? which should be renamed to syslinux.cfg ? and then copy the contents of /mnt/dvd1/images/* to USB's sdb2 ? but i think i am also suppose to copy and paste the both CentOS-6.4-x86_64-bin-DVD1.iso CentOS-6.4-x86_64-bin-DVD2.iso somewhere into this USB's sdb2 partition, correct ? almost like a drag and drop kind of a thing? or do they go into any folders ? centos' own web site has some instructions but those instructions do not work. http://wiki.centos.org/HowTos/InstallFromUSBkey i once got this working but things got ruined, i have to do it again and this time take notes.

  Read the article

< Previous Page | 26 27 28 29 30 31 32  | Next Page >