Search Results

Search found 12367 results on 495 pages for 'disk io'.

Page 30/495 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

  • IIS and PHP restrict IO permissions

    - by ULTRA_POROV
    I have php installed trough a fastCGI module. Is there a way to restrict the module (php.exe) read / write permissions to only the directory (+ subdirs) of the IIS site that is calling it? I need this to prevent one IIS PHP site from having access to files outside its own directory. How to do this? Is there a setting in php.ini or in the IIS configuration? I believe such a feature could exist, because when a file on the server is requested the root path of the site is also known, all it would take is that IIS passes this path to the php module, and the php module should on its end allow only IO operations within this path. PS: I know it is possible to achieve this by using a different windows account for each website, this is not an option.

    Read the article

  • Why df and du show different output

    - by Nischay
    When I execute command df -h /tmp it says disk utilization is 100% but when it tried du -sh /tmp it says disk utilization is 2%. I want to know why these commands shows different output and these two commands work and what is the solution of this problem. /var is installed on it own file system .I am using Ubuntu 12.04 server edition on my vps account.Due to this problem utilization of /tmp 100% according to df some programs complain about free space in /tmp.

    Read the article

  • Cannot boot from K/Ubuntu install disk on my UEFI system

    - by user93241
    I just got a new system and have been trying to get it set up w/ Win7 & Kubuntu dual-boot, but I've got a major problem. The BIOS of my motherboard (an Asus Crosshair 990FX) is strictly UEFI -- there is no legacy support mode available. I've been reading up on how to get Kubuntu installed in UEFI mode but no matter what I try I cannot seem to even boot into my install CD/USB key properly. I can get as far as the selection screen ("Try Kubuntu", "Install Kubuntu"...) but this screen starts off not appearing correctly. If I try moving the cursor around it sometimes seems to correct itself and show me my choices. But once I select "Try Kubuntu" it starts loading, the screen goes black and then proceeds to flicker -- about once every 5-10 seconds or so. This continues indefinitely. I've tried this with both Kubuntu & Ubuntu installation media, even the AMD64+Mac Ubuntu variety that is supposed to be a lot more flexible w.r.t. UEFI. The only hint I've had that the system might have booted correctly is a little drum sound that plays when booting from the Ubuntu install disk. Well, that and the fact that when I hit my system's power button it seems to shut down correctly, even ejecting the CD at the end. This might be a video driver issue; my system has two nVidia 550's, one of which is attached to my primary monitor. (The secondary isn't hooked up yet.) I'll keep looking over similar questions but any advice would be greatly appreciated. UPDATE: I've tried booting into my 12.04 install CD twice now, each time using two different options supplied by my BIOS. One seemed to offer the ability to boot into my CD under UEFI mode -- this didn't even produce the initial boot menu. The other method offers the ability to boot into my CD NOT under UEFI mode. This DOES produce the boot menu, but after this point it seems I still cannot get to a proper video mode to see what's going on.

    Read the article

  • High IO latency on ESXi 4.1 on HP DL580 G7

    - by teddydestodes
    at my Company we were experiencing some weird spikes on IO latency on one of our ESXi instances. we've spend 24h figuring out whats wrong and no clue so far. after giving up we put all the disks into a different server (HP DL380 G7) with much less RAM and only one 6(HT) cores (from 12 on the DL 580) which run fine for about 2 hours. I dont know the specs for the DL380 but both servers have a Smart Array P410i with BBWC (the DL 580 has 1GB) Is it possible that one(or all) of the disks is failing without actually failing?

    Read the article

  • java.io.EOFException while writing and reading froma servlet

    - by mithun1538
    Hello everyone, I have the following code on the applet side: URL servlet = new URL(appletCodeBase, "FormsServlet?form=requestRoom"); URLConnection con = servlet.openConnection(); con.setDoOutput(true); con.setDoInput(true); con.setUseCaches(false); con.setRequestProperty("Content-Type", "application/octet-stream"); ObjectOutputStream out = new ObjectOutputStream(con.getOutputStream()); out.writeObject(user);//user is an object of a serializable class out.flush(); out.close(); ObjectInputStream in = new ObjectInputStream(con.getInputStream()); status = (String)in.readObject(); in.close(); if("success".equals("status")) { JOptionPane.showMessageDialog(rootPane, "Request submitted successfully."); } else { JOptionPane.showMessageDialog(rootPane, "ERROR! Request cannot be made at this time"); } In the servlet side I recieve the code as follows: form = request.getParameter("form"); if("requestRoom".equals(form)) { String fullName, eID, reason; UserRequestingRoom user; try { in = new ObjectInputStream(request.getInputStream()); user = (UserRequestingRoom)in.readObject(); fullName = user.getFullName(); eID = user.getEID(); reason = user.getReason(); Class.forName("com.mysql.jdbc.Driver"); Connection con = DriverManager.getConnection("jdbc:mysql://localhost:3306/chat_applet","root",""); PreparedStatement statement = con.prepareStatement("INSERT INTO REQCONFROOM VALUES(\"" + fullName + "\",\"" + eID + "\",\"" + reason + "\")"); statement.execute(); out = new ObjectOutputStream(response.getOutputStream()); out.writeObject("success"); out.flush(); } catch (Exception e) { e.printStackTrace(); out = new ObjectOutputStream(response.getOutputStream()); out.writeObject("fail"); out.flush(); } } When I click on the button that calls the code in the applet side, I get the following error: java.io.EOFException at java.io.ObjectInputStream$PeekInputStream.readFully(Unknown Source) at java.io.ObjectInputStream$BlockDataInputStream.readShort(Unknown Source) at java.io.ObjectInputStream.readStreamHeader(Unknown Source) at java.io.ObjectInputStream.<init>(Unknown Source) at com.org.RequestRoomForm.requestActionPerformed(RequestRoomForm.java:151) **//Line 151 is "ObjectInputStream in..." line in the applet code** at com.org.RequestRoomForm.access$000(RequestRoomForm.java:7) at com.org.RequestRoomForm$1.actionPerformed(RequestRoomForm.java:62) at javax.swing.AbstractButton.fireActionPerformed(Unknown Source) at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source) at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source) at javax.swing.DefaultButtonModel.setPressed(Unknown Source) at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source) at java.awt.Component.processMouseEvent(Unknown Source) at javax.swing.JComponent.processMouseEvent(Unknown Source) at java.awt.Component.processEvent(Unknown Source) at java.awt.Container.processEvent(Unknown Source) at java.awt.Component.dispatchEventImpl(Unknown Source) at java.awt.Container.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source) at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source) at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source) at java.awt.Container.dispatchEventImpl(Unknown Source) at java.awt.Window.dispatchEventImpl(Unknown Source) at java.awt.Component.dispatchEvent(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source) Why am I getting this error? I have flushed when I output, I have closed the connections also, yet I get the error. Any reason for this?

    Read the article

  • How to download files directly to disk on the iPhone os?

    - by favo
    Hi, I would like to download files directly from an URL to the disk using objective-c on the iPhone os. Currently I am using NSURLConnection to send a synchronousRequest, writing the returned NSData into a file. How can I change the download handling (still having the request beeing synchronous, it is already in a background thread) to write the data directly to disk, not using memory variables to store the complete content (only small parts)? A sample code would be appreciated. Thank you all in advance for your responses!

    Read the article

  • responsibility for storage

    - by Stefano Borini
    A colleague and I were brainstorming about where to put the responsibility of an object to store itself on the disk in our own file format. There are basically two choices: object.store(file) fileformatWriter.store(object) The first one gives the responsibility of serialization on the disk to the object itself. This is similar to the approach used by python pickle. The second groups the representation responsibility on a file format writer object. The data object is just a plain data container (eventually with additional methods not relevant for storage). We agreed on the second methodology, because it centralizes the writing logic from generic data. We also have cases of objects implementing complex logic that need to store info while the logic is in progress. For these cases, the fileformatwriter object can be passed and used as a delegate, calling storage operations on it. With the first pattern, the complex logic object would instead accept the raw file, and implement the writing logic itself. The first method, however, has the advantage that the object knows how to write and read itself from any file containing it, which may also be convenient. I would like to hear your opinion before starting a rather complex refactoring.

    Read the article

  • Banshee encountered a Fatal Error (sqlite error 11: database disk image is malformed)

    - by Nik
    I am running ubuntu 10.10 Maverick Meerkat, and recently I am helping in testing out indicator-weather using the unstable buids. However there was a bug which caused my system to freeze suddenly (due to indicator-weather not ubuntu) and the only way to recover is to do a hard reset of the system. This happened a couple of times. And when i tried to open banshee after a couple of such resets I get the following fatal error which forces me to quit banshee. The screenshot is not clear enough to read the error, so I am posting it below, An unhandled exception was thrown: Sqlite error 11: database disk image is malformed (SQL: BEGIN TRANSACTION; DELETE FROM CoreSmartPlaylistEntries WHERE SmartPlaylistID IN (SELECT SmartPlaylistID FROM CoreSmartPlaylists WHERE IsTemporary = 1); DELETE FROM CoreSmartPlaylists WHERE IsTemporary = 1; COMMIT TRANSACTION) at Hyena.Data.Sqlite.Connection.CheckError (Int32 errorCode, System.String sql) [0x00000] in <filename unknown>:0 at Hyena.Data.Sqlite.Connection.Execute (System.String sql) [0x00000] in <filename unknown>:0 at Hyena.Data.Sqlite.HyenaSqliteCommand.Execute (Hyena.Data.Sqlite.HyenaSqliteConnection hconnection, Hyena.Data.Sqlite.Connection connection) [0x00000] in <filename unknown>:0 Exception has been thrown by the target of an invocation. at System.Reflection.MonoCMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0 at System.Reflection.MonoCMethod.Invoke (BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0 at System.Reflection.ConstructorInfo.Invoke (System.Object[] parameters) [0x00000] in <filename unknown>:0 at System.Activator.CreateInstance (System.Type type, Boolean nonPublic) [0x00000] in <filename unknown>:0 at System.Activator.CreateInstance (System.Type type) [0x00000] in <filename unknown>:0 at Banshee.Gui.GtkBaseClient.Startup () [0x00000] in <filename unknown>:0 at Hyena.Gui.CleanRoomStartup.Startup (Hyena.Gui.StartupInvocationHandler startup) [0x00000] in <filename unknown>:0 .NET Version: 2.0.50727.1433 OS Version: Unix 2.6.35.27 Assembly Version Information: gkeyfile-sharp (1.0.0.0) Banshee.AudioCd (1.9.0.0) Banshee.MiniMode (1.9.0.0) Banshee.CoverArt (1.9.0.0) indicate-sharp (0.4.1.0) notify-sharp (0.4.0.0) Banshee.SoundMenu (1.9.0.0) Banshee.Mpris (1.9.0.0) Migo (1.9.0.0) Banshee.Podcasting (1.9.0.0) Banshee.Dap (1.9.0.0) Banshee.LibraryWatcher (1.9.0.0) Banshee.MultimediaKeys (1.9.0.0) Banshee.Bpm (1.9.0.0) Banshee.YouTube (1.9.0.0) Banshee.WebBrowser (1.9.0.0) Banshee.Wikipedia (1.9.0.0) pango-sharp (2.12.0.0) Banshee.Fixup (1.9.0.0) Banshee.Widgets (1.9.0.0) gio-sharp (2.14.0.0) gudev-sharp (1.0.0.0) Banshee.Gio (1.9.0.0) Banshee.GStreamer (1.9.0.0) System.Configuration (2.0.0.0) NDesk.DBus.GLib (1.0.0.0) gconf-sharp (2.24.0.0) Banshee.Gnome (1.9.0.0) Banshee.NowPlaying (1.9.0.0) Mono.Cairo (2.0.0.0) System.Xml (2.0.0.0) Banshee.Core (1.9.0.0) Hyena.Data.Sqlite (1.9.0.0) System.Core (3.5.0.0) gdk-sharp (2.12.0.0) Mono.Addins (0.4.0.0) atk-sharp (2.12.0.0) Hyena.Gui (1.9.0.0) gtk-sharp (2.12.0.0) Banshee.ThickClient (1.9.0.0) Nereid (1.9.0.0) NDesk.DBus.Proxies (0.0.0.0) Mono.Posix (2.0.0.0) NDesk.DBus (1.0.0.0) glib-sharp (2.12.0.0) Hyena (1.9.0.0) System (2.0.0.0) Banshee.Services (1.9.0.0) Banshee (1.9.0.0) mscorlib (2.0.0.0) Platform Information: Linux 2.6.35-27-generic i686 unknown GNU/Linux Disribution Information: [/etc/lsb-release] DISTRIB_ID=Ubuntu DISTRIB_RELEASE=10.10 DISTRIB_CODENAME=maverick DISTRIB_DESCRIPTION="Ubuntu 10.10" [/etc/debian_version] squeeze/sid Just to make it clear, this happened only after the hard resets and not before. I used to use banshee everyday and it worked perfectly. Can anyone help me fix this?

    Read the article

  • Ubuntu 11.04 and 10.04 hang with black screen while installing from USB disk

    - by Bill
    I've been trying to install Ubuntu 11.04 from a USB flash stick and each time I try to boot from the USB key one of two things happen: A) The screen that asks you what you would like to do (e.g. run Ubuntu from the USB key or install it) shows up and the countdown to the default option starts to count down but as soon as I either touch the keyboard (sometimes I press enter or the arrow keys to select an option) or the countdown gets to zero the screen just locks up and nothing happens no matter how long I wait. B) When I boot from the USB key the screen will flicker for a second and then go black with a flashing white underscore at the top left corner of the screen. Again it doesn't matter how long I wait, nothing happens and pressing keys doesn't do a thing. The very first time I tried to install it I got a terminal-like screen that said something about a directory called 'casper' having an error of some sort. I have tried installing from USB using both 11.04 and 10.10. I'm about to try 10.04. I have read tons of forum posts about this but so far I haven't seen anything in the solutions that apply to me. My intention is to dual boot Windows 7 and Ubuntu. I must keep Windows as I am required to use Visual Studio for one of my college courses. Right now I'm using Wubi but I really want a full install. I can't use LVPM because it doesn't work with the version of Wubi I used. So now I'm thinking my best bet is to try to get a clean install working. I'd also convert Wubi to a full install too but there's no solution as far as I've read. So could someone tell me a reason why this is happening or if there's something I can do to get around the problem? I'm using a Gateway LT2802u netbook with and Intel Atom N455 processor, 1GB RAM, Intel Graphics Media Accelerator 3150 graphics card, and a 250GB HDD. I don't have anything on my current Wubi install that I can't replace so keep in mind when answering that I don't care if I lose my current settings and files from Wubi. Thanks everyone! UPDATE I just answered my own question so in case anyone else is having this same problem using similar hardware, do the following: When I first tried installing 11.04 I used the recommended universal installer tool to create the USB live/installation disk. That caused the original problem. Note that I had already downloaded the 11.04 ISO and did not use the included downloader from the USB creator. After that failed I used the same USB creator but had it download 10.10 for me. It also failed with the same issue. I repeated this process with unetbootin as well for both versions. Finally, I downloaded the Ubuntu 10.04 ISO and used the recommended USB creator once again. There was an error while creating the USB live install so I reformatted the USB key as FAT32 and tried again. It created the USB key. I then booted from the USB flash drive and selected "Install Ubuntu" (exact wording was different). It worked! It took me through the process that you see shown in pictures on the Ubuntu website. I let it create the appropriate partitions for me and it simply worked. I did get a few errors while the system tried to restart after it installed. It hung on a terminal-like screen but I pressed ENTER and it restarted. I booted into Windows 7, it checked the disks as it sensed that I messed with a partition, then it booted into Windows normally. Now I'm going to uninstall Wubi and update my new full install of Ubuntu! I'm excited to get the benefits of a full install now. So in the end, hopefully someone can learn from what I did.

    Read the article

  • How to tell if linux disk IO is causing excessive (> 1 second) application stalls

    - by noahz
    I have a Java application performing a large volume (hundreds of MB) of continuous output (streaming plain text) to about a dozen files a ext3 SAN filesystem. Occasionally, this application pauses for several seconds at a time. I suspect that something related to ext3 vsfs (Veritas Filesystem) functionality (and/or how it interacts with the OS) is the culprit. What steps can I take to confirm or refute this theory? I am aware of iostat and /proc/diskstats as starting points. Revised title to de-emphasize journaling and emphasize "stalls" I have done some googling and found at least one article that seems to describe behavior like I am observing: Solving the ext3 latency problem Additional Information Red Hat Enterprise Linux Server release 5.3 (Tikanga) Kernel: 2.6.18-194.32.1.el5 Primary application disk is fiber-channel SAN: lspci | grep -i fibre 14:00.0 Fibre Channel: Emulex Corporation Saturn-X: LightPulse Fibre Channel Host Adapter (rev 03) Mount info: type vxfs (rw,tmplog,largefiles,mincache=tmpcache,ioerror=mwdisable) 0 0 cat /sys/block/VxVM123456/queue/scheduler noop anticipatory [deadline] cfq

    Read the article

  • iotop for Linux kernel 2.6.18

    - by Lightsauce
    So it has to come to my attention that iotop isn't availalbe for 2.6.18 since it's less than 2.6.20 and requires Python 2.6+. I've done some research and came across this article: http://lserinol.blogspot.com/2009/09/io-usage-per-process-on-linux.html According to this, if these process have io stats in /proc/pid#/io (where pid# is the process #) it's doable regardless of the kernel version. So, in reality, I could upgrade Python to 2.6 and test out iotop. However, my flavor of Linux, CentOS release 5.5 (Final), only supports Python 2.4.3-44.el5 currently. If I were to do uninstall from yum, it doesn't look so pretty. It ends up wanting to uninstall 235 packages, most of which are very important! I read in one place, online (I forget the URL from yesterday), that you can install Python 2.6+ parallel to this one, and have the rpm install for iotop use that. Well, I didn't choose that route. I figured, what the heck, lets write iotop (not copying it, but reverse engineering it without actually looking at it's code/it in use) in bash. I thought it would just grab the /proc/pid#/io file and parse stats. So I wrote a script to grab the top 10 rchar, wchar, read_bytes, and write_bytes by collecting all these stats from all the /proc/pid#/io files, sorting them by each metric, then grabbing the top 10 highest values. The conclusion, the data seems completely useless. Does anybody know any resources for advanced Linux where I can figure out how to take these /proc/pid#/ directories and figure out what the heck they are doing with io on the disk? My main goal is to figure out what exactly is causing high load on my disk. I just know it's on the / partition (/dev/sda2 in this case), and I'm not really sure how to narrow it down without the help of iotop. If I run iostat to grab metrics for 1 minute, every second, the first result it gives me shows a high 'kB_read/s', so that makes me think, it's reading mostly. However, if I watch the update it gives me every second, it's actually just showing values for kB_wrtn/s. This makes me think the initial value iostat gives me is misleading.

    Read the article

  • How to Get All the Windows 8 Editions on One Install Disk

    - by Taylor Gibb
    There are a lot of different versions of Windows, but you probably didn’t know that short of the Enterprise edition, the disc or image that you own contains all versions for that architecture. Read on to see how we can use them to make a universal Windows 8 install disc. Things You Will Need A x86 Version of Windows 8 A x64 Version of Windows 8 A x86 Version of Windows 8 Enterprise A x64 Version of Windows 8 Enterprise A Windows 8 PC Note: While we will use all the images above you don’t really need the Enterprise Edition. You could always leave out parts of the tutorial if you know what you are doing, if you are not comfortable with that and still want to follow through you could always grab the Enterprise evaluation images that are available for free to the public, on MSDN. Getting Started To get started you will need to Download the Windows 8 ADK from Microsoft. Once downloaded go ahead and install it, you will only need the Deployment tools so be sure to uncheck the rest of the options. Lastly you will also need to create the following folder structure on the root of your C:\ drive to make things a bit easier. C:\Windows8Root C:\Windows8Root\x86 C:\Windows8Root\x64 C:\Windows8Root\Enterprisex86 C:\Windows8Root\Enterprisex64 C:\Windows8Root\Temp C:\Windows8Root\Final OK lets get started. Making The Image The first thing we need to do is create a base image, so mount the x86 version of Windows 8 and copy its files to: C:\Windows8Root\Final Now move the install.wim file from: C:\Windows8Root\Final\sources To: C:\Windows8Root\x86 Next go ahead and copy the install.wim file from the other 3 images, Windows 8 x64, Windows 8 Enterprise x86 and Windows 8 Enterprise x64 to the respective folders in Windows8Root, the install.wim file can be located at: D:\sources\install.wim Note: The above assumes that the images are always mounted at drive D. Remember that each install.wim is different so don’t copy them to the wrong directories or the rest of the tutorial wont work. Next switch to the Metro Start Screen and open the Deployment and Imaging Tools Environment. Note: If you are not a local administrator on your PC, you will need to right-click on it and choose to run it as an administrator. Now run the following commands: Dism /Export-Image /SourceImageFile:c:\Windows8Root\x86\install.wim /SourceIndex:2 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8″ /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x86\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x86\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro with Media Center” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\Enterprisex86\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Enterprise” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x64\install.wim /SourceIndex:2 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8″ /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x64\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x64\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro with Media Center” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\Enterprisex64\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Enterprise” /compress:maximum Next navigate to: C:\Windows8Root\sources\ And create a new text file. You will need to call it: EI.cfg Then edit it to look like the following: The last thing we need to do is work some magic to get Windows Media Center added to the WMC editions of Windows 8. For that I have written a little script to make it easier for everybody, you can grab it here. Once you have downloaded it extract it. In order to use it right-click in the bottom left hand corner of the screen, and open an elevated command prompt. Then go ahead and paste the following into the command prompt window. powershell.exe -ExecutionPolicy Unrestricted -File C:\Users\Taylor\Documents\HTGWindows8Converter.ps1 Note: You will need to replace the path to the script, another thing to note is that if the path you replace it with has spaces you will need to enclose the path in quotes. The script should kick off straight away and has some progress bars you can watch while it does its thing. Half way through another Window will pop open, which will start creating your final ISO image. When its complete, close the command prompt and you should have an ISO image on the root of your C drive called: HTGWindows8.iso That’s all there is to it. 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

    Read the article

  • Invoking 'Hotkey Mode' in IO Gear's GCS632U KVM Switch

    - by Tim Visher
    Awhile ago I changed the switch port key to left control on my IO Gear USB Switch and I'd like to change it back to Scroll Lock. When I did this, I have some memory of believing that I had found an error in the documentation for the switch regarding how to enter Hotkey Mode. Per the instructions in the manual(PDF), I'm supposed to be able to enter Hotkey Mode by Holding Scroll Lock for 2 seconds, adding Minus on the keypad for one second, and then release Minus first and within a second release Scroll lock. Ignoring the strangeness and fragility of this process, I'm looking for confirmation that this indeed works for anyone else. I can't remember why I thought it was wrong but I clearly remember that I did (I even had a blog post that I was going to write about but it got lost in the sands of time). As an aside, I'd be interested in seeing if there is any way to force a reset for the switch without entering Hotkey Mode as that would do exactly what I'm trying to do and I wouldn't have to mess with Hotkey Mode. Thanks in advance!

    Read the article

  • Still about SSD potentials...write and read speed

    - by Macroideal
    I have been working on SSD (solid state disk) for several months..Problems and Questions hit my head unexpectedly..Coz i am a virgin in ssd... Especially these days I was testing the write-read speed of ssd, which I was always caring.... however result turned out not good as I expected, or even worse Three kinds of read-write were implemented in my test read and write directly from and into ssd, with openning ssd as a whole device. in windows: _open("\\:g", ***).. It can be very tricky and hairy that you'd write a data with size of folds of 512, at the disk position of folds of 512bytes... So, If you wanto write just a byte or 4 bytes, you'v to write at least a whole sector one time. Read and write data from and into files located in SSD... Read and Write data from and into files in mechanical Disk I compared the pratices below...I found ssd sucks...the ssd performs worse than mechanical disk... so i am wondering where i can get the potential performance of ssd, since ssd is said to a substitute for mechanical disk in the future.. Nevertheless, I test ssd with a pro-hard-disk tools..ssd is like twice speedier than mechanical disk. So, why?

    Read the article

  • High load average, low CPU and IO (Centos 5.7)

    - by Ben
    A Drupal 7 site with CiviCRM, after running smoothly for a year on a 1&1 VPS suddenly became unresponsive. Now pages eventually load, but can take more than a minute. Looking at resource use in Virtuozzo, the load average carries a warning, and has remained above 1. While I understand this isn't particularly high, this is a change from when the site was working. Here is a typical snapshot of top: top - 03:10:32 up 3:21, 1 user, load average: 1.16, 1.22, 1.30 Tasks: 43 total, 1 running, 42 sleeping, 0 stopped, 0 zombie Cpu(s): 0.1%us, 0.1%sy, 0.1%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2097152k total, 1015112k used, 1082040k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached CPU idle level never seems to go much below 70%. wa is virtually always at 0. There appears to be lots of free memory. And here is some vmstat output, again showign wa at 0, plenty of free memory, and an idle CPU: procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 2 0 0 1100872 0 0 0 0 2783 23672 0 538 1 0 99 0 0 1 0 0 1100872 0 0 0 0 0 16 0 101754 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 17 0 103133 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 1 0 102080 0 0 100 0 0 1 0 0 1100872 0 0 0 0 0 6 0 99881 0 0 100 0 0 0 0 0 1100872 0 0 0 0 0 1 0 105187 0 0 100 0 0 I've spoken to 1&1 but they don't have any ideas as to what could be causing the high load average. Instead they suggested an upgrade :) I've looked for processes that might be causing this, examined MySQL showprocesslist, and restarted the container with no result. Does anyone have more troubleshooting suggestions or insights?

    Read the article

  • Improving IO with FlashCache

    - by Devator
    I have a server with 2 HDD's (2x 1 TB), running in RAID 1 (SW-RAID). I want to improve IO performance by using flashcache. There are running KVM virtual machines on it, using LVM. Regarding this, I have the following questions: Will this even work? flashcache works for block devices, however these are all virtual machines with their own setup. How much would I expect to increase performance? Most virtual machines run websites and some host games. How big does the SSD needs to be? Would having a bigger SSD increase performance since it's able to cache more files? What happens if the SSD dies? Would flashcache retrieve files from the traditional HDD and I could simply replace the SSD? How much faster would writeback be in comparison with writethrough and writearound? I have no access to a test system unfortunately, so could I install flashcache on a live server without unmounting the the disks? I found a great tutorial here which I would be using.

    Read the article

  • Can't mount Linux usd disk. It just create /dev/sg device but no /dev/sd

    - by MTilsted
    I have a Corsair R60 ssd disk which is a disk with both sata and usb connectors. But the usb thing seems to be a bit non-standard, or maybe its just my fedora linux. When I insert the disk using a usb cabel to a running Fedora 14 linux system, a device called /dev/sg3 is added but that is all. No new /dev/sd* device is created so I can't mount the disk. If I look at cat /proc/scsi/sg/device_strs I get ATA Hitachi HTS54321 FB2O HL-DT-ST DVDRAM GSA-T50N RP05 Seagate Desktop 0130 Corsair CSSD-R60GB2 So the disk is there. (The last entry) but my linux will for some reason not see it as a usb hard disk. When I insert other usb disks they work fine. It is only this specific disk which causes problems. I have tried on 3 different computers with the same result. A hint to the problem may be that if I add the disk to a windows system(With usb) the disk is called "A fixed disk" and not a portable disk as expected. The disk works fine with linux If i connect it with the sata cabel, but I would really like to have it working with usb too. (To mount it on computers without sata).

    Read the article

  • Can't mount Linux usb disk. It just create /dev/sg device but no /dev/sd

    - by MTilsted
    I have a Corsair R60 ssd disk which is a disk with both sata and usb connectors. But the usb thing seems to be a bit non-standard, or maybe its just my fedora linux. When I insert the disk using a usb cabel to a running Fedora 14 linux system, a device called /dev/sg3 is added but that is all. No new /dev/sd* device is created so I can't mount the disk. If I look at cat /proc/scsi/sg/device_strs I get ATA Hitachi HTS54321 FB2O HL-DT-ST DVDRAM GSA-T50N RP05 Seagate Desktop 0130 Corsair CSSD-R60GB2 So the disk is there. (The last entry) but my linux will for some reason not see it as a usb hard disk. When I insert other usb disks they work fine. It is only this specific disk which causes problems. I have tried on 3 different computers with the same result. A hint to the problem may be that if I add the disk to a windows system(With usb) the disk is called "A fixed disk" and not a portable disk as expected. The disk works fine with linux If i connect it with the sata cabel, but I would really like to have it working with usb too. (To mount it on computers without sata). Added: I did try to mount /dev/sg3 but mount say that its not a block device. (File say Its a character special device). Added output from dmesg: [ 97.454073] usb 7-1: USB disconnect, address 2 [ 105.913055] hub 2-0:1.0: unable to enumerate USB device on port 3 [ 107.048054] usb 2-3: new high speed USB device using ehci_hcd and address 5 [ 107.162900] usb 2-3: New USB device found, idVendor=1b1c, idProduct=1ab8 [ 107.162903] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 107.162906] usb 2-3: Product: CSSD-R60GB2 [ 107.162908] usb 2-3: Manufacturer: Corsair [ 107.162910] usb 2-3: SerialNumber: 10111441000000990069 [ 107.167651] scsi7 : usb-storage 2-3:1.0 [ 108.195543] scsi 7:0:0:0: Direct-Access Corsair CSSD-R60GB2 PQ: 1 ANSI: 0 [ 108.197732] scsi 7:0:0:0: Attached scsi generic sg3 type 0

    Read the article

  • Is there a Mac utility that does low level drive integrity check and repair?

    - by Puzzled Late at Night
    The PGP Whole Disk Encryption for Mac OS X Quick Start User Guide version 10.0 contains the following remarks: PGP Corporation deliberately takes a conservative stance when encrypting drives, to prevent loss of data. It is not uncommon to encounter Cyclic Redundancy Check (CRC) errors while encrypting a hard disk. If PGP WDE encounters a hard drive with bad sectors, PGP WDE will, by default, pause the encryption process. This pause allows you to remedy the problem before continuing with the encryption process, thus avoiding potential disk corruption and lost data. To avoid disruption during encryption, PGP Corporation recommends that you start with a healthy disk by correcting any disk errors prior to encrypting. and As a best practice, before you attempt to use PGP WDE, use a third-party scan disk utility that has the ability to perform a low-level integrity check and repair any inconsistencies with the drive that could lead to CRC errors. These software applications can correct errors that would otherwise disrupt encryption. The PGP WDE Windows user guide suggests SpinRite or Norton Disk Doctor. What recourse do I have on the Mac?

    Read the article

  • Where's my free space gone? (on my mac) [closed]

    - by Cawas
    Possible Duplicate: Something’s slowly eating my HD space Somehow part of my files from my USB disk, 40GB of it (exactly the space I was missing), were copied to /Volumes/ and when I mounted the disk it was called "600GB Disk 2", while "600GB Disk" was filled with duplicated data. All that happened at once, slowly, just this morning when I turned on my macbook. I could notice that thanks to Disk Inventory X. I could actually see those on GrandPerspective, but I thought it was just scanning my USB limited to that folder for whatever reason. On Disk Inventory I could see the /Volumes/ listing one folder as a folder and the second one as a link, like it should be. Well, looking at that folder, I quickly associated what was in it with my scheduled backup on Carbon Copy Cloner. I'm still not sure why the USB disk was mounted with wrong name, but what happened was CCC store the full path information of the source and destination, so when it tried to do the schedule backup it created the path that didn't exist, and copied everything there - while it should be copying into the mounted volume. While this is solved this time, what else could I have done to diagnose this kind of issue, for the next time?

    Read the article

  • Distinction between IO error and refusing to authenticate using HTTPService (ActionScript 3.0)

    - by Jonas
    I'm using HTTPService (tried with URLLoader but result is the same) to load XML file. Furthermore, XML file is secured with basic HTTP authentication. There are two kind of events I want to separate: IO Error User refuses to authenticate (pressing cancel on credential request dialog) The problem is that these two kind of events looks exactly the same (401 Status code is not presented). Is there any way to find out whether IO error occurred or authentication failed?

    Read the article

  • Channels in Socket.io

    - by mat3001
    Hi, I am trying to broadcast a message through the Node.js service socket.io (http://socket.io/) to certain subset of all subscribers. To be more exact, I would like to use channels that users can subscribe to, in order to efficiently push messages to a couple hundred people at the same time. I'm not really sure if addEvent('channel_name',x) is the way to go. I have not found anything in the docs. Any ideas? Thanks Mat

    Read the article

  • osx sys/io.h not found

    - by ioh
    Hi, I'd like to compile a c programm developed for linux using cc under os x. It includes the header sys/io.h. When compiling I get the error that this file could not be found? Isn't there any sys/io.h header file under os x? Any help would be really appreciated! Thanks!

    Read the article

  • Asynchronous IO in Java?

    - by thr
    What options for async io (socket-based) are there in java other then java.nio? Also does java.nio use threads in the backround (as I think .NET's async-socket-library does, maybe it's been changed) or is it "true" async io using a proper select call?

    Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >