Search Results

Search found 11553 results on 463 pages for 'disk utility'.

Page 30/463 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• Utility to LOGICALLY compare two xml files?

  - by Matthew

  Right now we are attempting to build golden configurations for our environment. One piece of software that we use relies on large XML files to contain the bulk of its configuration. We want tot ake our lab environment, catalog it as our "golden configuration" and then be able to audit against that configuration in the future. Since diff is bytewise comparison and NOT logical comparison, we can't use it to compare files in this case (XML is unordered, so it won't work). What I am looking for is something that can parse the two XML files, and compare them element by element. So far we have yet to find any utilities that can do this. OS doesn't matter, I can do it on anything where it will work. The preference is something off the shelf. Any ideas? Edit: One issue we have run into is one vendor's config files will occasionally mention the same element several times, each time with different attributes. Whatever diff utility we use would need to be able to identify either the set of attributes or identify them all as part of one element. Tall order :)

  Read the article

• Always maximize almost maximized window utility

  - by AbstractDissonance

  It drives me nuts when a window is nearly maximized but not quite and when I go to close/move/scroll it I end up bringing up the window behind it. This happens all the time with acrobat. It seems that it's default non-minimized state is usually an "almost" maximized windowed. Is there any utility that will maximize a window when it is open or size changed when it is near the size of the monitor. I'll never have any need to have a window 99% the size of the window with it centered. Why? Because it behaves just as a maximized window by obscuring all(well, almost all) the windows behind it. (It should be only the main window of an application that is affected) The issue seems to be a few programs like acrobat that, I guess, try to fit it's contents which, sometimes, happens to be almost the full screen but not quite making it look maximized when it is not. I do not want all windows to open maximized but have no need for the window state almost centered and almost the same size as the desktop. (I imagine most people don't)

  Read the article

• Banshee encountered a Fatal Error (sqlite error 11: database disk image is malformed)

  - by Nik

  I am running ubuntu 10.10 Maverick Meerkat, and recently I am helping in testing out indicator-weather using the unstable buids. However there was a bug which caused my system to freeze suddenly (due to indicator-weather not ubuntu) and the only way to recover is to do a hard reset of the system. This happened a couple of times. And when i tried to open banshee after a couple of such resets I get the following fatal error which forces me to quit banshee. The screenshot is not clear enough to read the error, so I am posting it below, An unhandled exception was thrown: Sqlite error 11: database disk image is malformed (SQL: BEGIN TRANSACTION; DELETE FROM CoreSmartPlaylistEntries WHERE SmartPlaylistID IN (SELECT SmartPlaylistID FROM CoreSmartPlaylists WHERE IsTemporary = 1); DELETE FROM CoreSmartPlaylists WHERE IsTemporary = 1; COMMIT TRANSACTION) at Hyena.Data.Sqlite.Connection.CheckError (Int32 errorCode, System.String sql) [0x00000] in <filename unknown>:0 at Hyena.Data.Sqlite.Connection.Execute (System.String sql) [0x00000] in <filename unknown>:0 at Hyena.Data.Sqlite.HyenaSqliteCommand.Execute (Hyena.Data.Sqlite.HyenaSqliteConnection hconnection, Hyena.Data.Sqlite.Connection connection) [0x00000] in <filename unknown>:0 Exception has been thrown by the target of an invocation. at System.Reflection.MonoCMethod.Invoke (System.Object obj, BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0 at System.Reflection.MonoCMethod.Invoke (BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo culture) [0x00000] in <filename unknown>:0 at System.Reflection.ConstructorInfo.Invoke (System.Object[] parameters) [0x00000] in <filename unknown>:0 at System.Activator.CreateInstance (System.Type type, Boolean nonPublic) [0x00000] in <filename unknown>:0 at System.Activator.CreateInstance (System.Type type) [0x00000] in <filename unknown>:0 at Banshee.Gui.GtkBaseClient.Startup () [0x00000] in <filename unknown>:0 at Hyena.Gui.CleanRoomStartup.Startup (Hyena.Gui.StartupInvocationHandler startup) [0x00000] in <filename unknown>:0 .NET Version: 2.0.50727.1433 OS Version: Unix 2.6.35.27 Assembly Version Information: gkeyfile-sharp (1.0.0.0) Banshee.AudioCd (1.9.0.0) Banshee.MiniMode (1.9.0.0) Banshee.CoverArt (1.9.0.0) indicate-sharp (0.4.1.0) notify-sharp (0.4.0.0) Banshee.SoundMenu (1.9.0.0) Banshee.Mpris (1.9.0.0) Migo (1.9.0.0) Banshee.Podcasting (1.9.0.0) Banshee.Dap (1.9.0.0) Banshee.LibraryWatcher (1.9.0.0) Banshee.MultimediaKeys (1.9.0.0) Banshee.Bpm (1.9.0.0) Banshee.YouTube (1.9.0.0) Banshee.WebBrowser (1.9.0.0) Banshee.Wikipedia (1.9.0.0) pango-sharp (2.12.0.0) Banshee.Fixup (1.9.0.0) Banshee.Widgets (1.9.0.0) gio-sharp (2.14.0.0) gudev-sharp (1.0.0.0) Banshee.Gio (1.9.0.0) Banshee.GStreamer (1.9.0.0) System.Configuration (2.0.0.0) NDesk.DBus.GLib (1.0.0.0) gconf-sharp (2.24.0.0) Banshee.Gnome (1.9.0.0) Banshee.NowPlaying (1.9.0.0) Mono.Cairo (2.0.0.0) System.Xml (2.0.0.0) Banshee.Core (1.9.0.0) Hyena.Data.Sqlite (1.9.0.0) System.Core (3.5.0.0) gdk-sharp (2.12.0.0) Mono.Addins (0.4.0.0) atk-sharp (2.12.0.0) Hyena.Gui (1.9.0.0) gtk-sharp (2.12.0.0) Banshee.ThickClient (1.9.0.0) Nereid (1.9.0.0) NDesk.DBus.Proxies (0.0.0.0) Mono.Posix (2.0.0.0) NDesk.DBus (1.0.0.0) glib-sharp (2.12.0.0) Hyena (1.9.0.0) System (2.0.0.0) Banshee.Services (1.9.0.0) Banshee (1.9.0.0) mscorlib (2.0.0.0) Platform Information: Linux 2.6.35-27-generic i686 unknown GNU/Linux Disribution Information: [/etc/lsb-release] DISTRIB_ID=Ubuntu DISTRIB_RELEASE=10.10 DISTRIB_CODENAME=maverick DISTRIB_DESCRIPTION="Ubuntu 10.10" [/etc/debian_version] squeeze/sid Just to make it clear, this happened only after the hard resets and not before. I used to use banshee everyday and it worked perfectly. Can anyone help me fix this?

  Read the article

• Ubuntu 11.04 and 10.04 hang with black screen while installing from USB disk

  - by Bill

  I've been trying to install Ubuntu 11.04 from a USB flash stick and each time I try to boot from the USB key one of two things happen: A) The screen that asks you what you would like to do (e.g. run Ubuntu from the USB key or install it) shows up and the countdown to the default option starts to count down but as soon as I either touch the keyboard (sometimes I press enter or the arrow keys to select an option) or the countdown gets to zero the screen just locks up and nothing happens no matter how long I wait. B) When I boot from the USB key the screen will flicker for a second and then go black with a flashing white underscore at the top left corner of the screen. Again it doesn't matter how long I wait, nothing happens and pressing keys doesn't do a thing. The very first time I tried to install it I got a terminal-like screen that said something about a directory called 'casper' having an error of some sort. I have tried installing from USB using both 11.04 and 10.10. I'm about to try 10.04. I have read tons of forum posts about this but so far I haven't seen anything in the solutions that apply to me. My intention is to dual boot Windows 7 and Ubuntu. I must keep Windows as I am required to use Visual Studio for one of my college courses. Right now I'm using Wubi but I really want a full install. I can't use LVPM because it doesn't work with the version of Wubi I used. So now I'm thinking my best bet is to try to get a clean install working. I'd also convert Wubi to a full install too but there's no solution as far as I've read. So could someone tell me a reason why this is happening or if there's something I can do to get around the problem? I'm using a Gateway LT2802u netbook with and Intel Atom N455 processor, 1GB RAM, Intel Graphics Media Accelerator 3150 graphics card, and a 250GB HDD. I don't have anything on my current Wubi install that I can't replace so keep in mind when answering that I don't care if I lose my current settings and files from Wubi. Thanks everyone! UPDATE I just answered my own question so in case anyone else is having this same problem using similar hardware, do the following: When I first tried installing 11.04 I used the recommended universal installer tool to create the USB live/installation disk. That caused the original problem. Note that I had already downloaded the 11.04 ISO and did not use the included downloader from the USB creator. After that failed I used the same USB creator but had it download 10.10 for me. It also failed with the same issue. I repeated this process with unetbootin as well for both versions. Finally, I downloaded the Ubuntu 10.04 ISO and used the recommended USB creator once again. There was an error while creating the USB live install so I reformatted the USB key as FAT32 and tried again. It created the USB key. I then booted from the USB flash drive and selected "Install Ubuntu" (exact wording was different). It worked! It took me through the process that you see shown in pictures on the Ubuntu website. I let it create the appropriate partitions for me and it simply worked. I did get a few errors while the system tried to restart after it installed. It hung on a terminal-like screen but I pressed ENTER and it restarted. I booted into Windows 7, it checked the disks as it sensed that I messed with a partition, then it booted into Windows normally. Now I'm going to uninstall Wubi and update my new full install of Ubuntu! I'm excited to get the benefits of a full install now. So in the end, hopefully someone can learn from what I did.

  Read the article

• How to Get All the Windows 8 Editions on One Install Disk

  - by Taylor Gibb

  There are a lot of different versions of Windows, but you probably didn’t know that short of the Enterprise edition, the disc or image that you own contains all versions for that architecture. Read on to see how we can use them to make a universal Windows 8 install disc. Things You Will Need A x86 Version of Windows 8 A x64 Version of Windows 8 A x86 Version of Windows 8 Enterprise A x64 Version of Windows 8 Enterprise A Windows 8 PC Note: While we will use all the images above you don’t really need the Enterprise Edition. You could always leave out parts of the tutorial if you know what you are doing, if you are not comfortable with that and still want to follow through you could always grab the Enterprise evaluation images that are available for free to the public, on MSDN. Getting Started To get started you will need to Download the Windows 8 ADK from Microsoft. Once downloaded go ahead and install it, you will only need the Deployment tools so be sure to uncheck the rest of the options. Lastly you will also need to create the following folder structure on the root of your C:\ drive to make things a bit easier. C:\Windows8Root C:\Windows8Root\x86 C:\Windows8Root\x64 C:\Windows8Root\Enterprisex86 C:\Windows8Root\Enterprisex64 C:\Windows8Root\Temp C:\Windows8Root\Final OK lets get started. Making The Image The first thing we need to do is create a base image, so mount the x86 version of Windows 8 and copy its files to: C:\Windows8Root\Final Now move the install.wim file from: C:\Windows8Root\Final\sources To: C:\Windows8Root\x86 Next go ahead and copy the install.wim file from the other 3 images, Windows 8 x64, Windows 8 Enterprise x86 and Windows 8 Enterprise x64 to the respective folders in Windows8Root, the install.wim file can be located at: D:\sources\install.wim Note: The above assumes that the images are always mounted at drive D. Remember that each install.wim is different so don’t copy them to the wrong directories or the rest of the tutorial wont work. Next switch to the Metro Start Screen and open the Deployment and Imaging Tools Environment. Note: If you are not a local administrator on your PC, you will need to right-click on it and choose to run it as an administrator. Now run the following commands: Dism /Export-Image /SourceImageFile:c:\Windows8Root\x86\install.wim /SourceIndex:2 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8″ /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x86\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x86\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro with Media Center” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\Enterprisex86\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Enterprise” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x64\install.wim /SourceIndex:2 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8″ /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x64\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\x64\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Pro with Media Center” /compress:maximum Dism /Export-Image /SourceImageFile:c:\Windows8Root\Enterprisex64\install.wim /SourceIndex:1 /DestinationImageFile:c:\Windows8Root\Final\sources\install.wim /DestinationName:”Windows 8 Enterprise” /compress:maximum Next navigate to: C:\Windows8Root\sources\ And create a new text file. You will need to call it: EI.cfg Then edit it to look like the following: The last thing we need to do is work some magic to get Windows Media Center added to the WMC editions of Windows 8. For that I have written a little script to make it easier for everybody, you can grab it here. Once you have downloaded it extract it. In order to use it right-click in the bottom left hand corner of the screen, and open an elevated command prompt. Then go ahead and paste the following into the command prompt window. powershell.exe -ExecutionPolicy Unrestricted -File C:\Users\Taylor\Documents\HTGWindows8Converter.ps1 Note: You will need to replace the path to the script, another thing to note is that if the path you replace it with has spaces you will need to enclose the path in quotes. The script should kick off straight away and has some progress bars you can watch while it does its thing. Half way through another Window will pop open, which will start creating your final ISO image. When its complete, close the command prompt and you should have an ISO image on the root of your C drive called: HTGWindows8.iso That’s all there is to it. 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

  Read the article

• C++: how to build my own utility library?

  - by augustin

  I am starting to be proficient enough with C++ so that I can write my own C++ based scripts (to replace bash and PHP scripts I used to write before). I find that I am starting to have a very small collection of utility functions and sub-routines that I'd like to use in several, otherwise unrelated C++ scripts. I know I am not supposed to reinvent the wheel and that I could use external libraries for some of the utilities I'm creating for myself. However, it's fun to create my own utility functions, they are perfectly tailored to the job I have in mind, and it's for me a large part of the learning process. I'll see about using more polished external libraries when I am proficient enough to work on more serious, long term projects. So, the question is: how do I manage my personal utility library in a way that the functions can be easily included in my various scripts? I am using linux/Kubuntu, vim, g++, etc. and mostly coding CLI scripts. Don't assume too much in terms of experience! ;) Links to tutorials or places where relevant topics are properly documented are welcome.

  Read the article

• Still about SSD potentials...write and read speed

  - by Macroideal

  I have been working on SSD (solid state disk) for several months..Problems and Questions hit my head unexpectedly..Coz i am a virgin in ssd... Especially these days I was testing the write-read speed of ssd, which I was always caring.... however result turned out not good as I expected, or even worse Three kinds of read-write were implemented in my test read and write directly from and into ssd, with openning ssd as a whole device. in windows: _open("\\:g", ***).. It can be very tricky and hairy that you'd write a data with size of folds of 512, at the disk position of folds of 512bytes... So, If you wanto write just a byte or 4 bytes, you'v to write at least a whole sector one time. Read and write data from and into files located in SSD... Read and Write data from and into files in mechanical Disk I compared the pratices below...I found ssd sucks...the ssd performs worse than mechanical disk... so i am wondering where i can get the potential performance of ssd, since ssd is said to a substitute for mechanical disk in the future.. Nevertheless, I test ssd with a pro-hard-disk tools..ssd is like twice speedier than mechanical disk. So, why?

  Read the article

• Can't mount Linux usd disk. It just create /dev/sg device but no /dev/sd

  - by MTilsted

  I have a Corsair R60 ssd disk which is a disk with both sata and usb connectors. But the usb thing seems to be a bit non-standard, or maybe its just my fedora linux. When I insert the disk using a usb cabel to a running Fedora 14 linux system, a device called /dev/sg3 is added but that is all. No new /dev/sd* device is created so I can't mount the disk. If I look at cat /proc/scsi/sg/device_strs I get ATA Hitachi HTS54321 FB2O HL-DT-ST DVDRAM GSA-T50N RP05 Seagate Desktop 0130 Corsair CSSD-R60GB2 So the disk is there. (The last entry) but my linux will for some reason not see it as a usb hard disk. When I insert other usb disks they work fine. It is only this specific disk which causes problems. I have tried on 3 different computers with the same result. A hint to the problem may be that if I add the disk to a windows system(With usb) the disk is called "A fixed disk" and not a portable disk as expected. The disk works fine with linux If i connect it with the sata cabel, but I would really like to have it working with usb too. (To mount it on computers without sata).

  Read the article

• Can't mount Linux usb disk. It just create /dev/sg device but no /dev/sd

  - by MTilsted

  I have a Corsair R60 ssd disk which is a disk with both sata and usb connectors. But the usb thing seems to be a bit non-standard, or maybe its just my fedora linux. When I insert the disk using a usb cabel to a running Fedora 14 linux system, a device called /dev/sg3 is added but that is all. No new /dev/sd* device is created so I can't mount the disk. If I look at cat /proc/scsi/sg/device_strs I get ATA Hitachi HTS54321 FB2O HL-DT-ST DVDRAM GSA-T50N RP05 Seagate Desktop 0130 Corsair CSSD-R60GB2 So the disk is there. (The last entry) but my linux will for some reason not see it as a usb hard disk. When I insert other usb disks they work fine. It is only this specific disk which causes problems. I have tried on 3 different computers with the same result. A hint to the problem may be that if I add the disk to a windows system(With usb) the disk is called "A fixed disk" and not a portable disk as expected. The disk works fine with linux If i connect it with the sata cabel, but I would really like to have it working with usb too. (To mount it on computers without sata). Added: I did try to mount /dev/sg3 but mount say that its not a block device. (File say Its a character special device). Added output from dmesg: [ 97.454073] usb 7-1: USB disconnect, address 2 [ 105.913055] hub 2-0:1.0: unable to enumerate USB device on port 3 [ 107.048054] usb 2-3: new high speed USB device using ehci_hcd and address 5 [ 107.162900] usb 2-3: New USB device found, idVendor=1b1c, idProduct=1ab8 [ 107.162903] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 107.162906] usb 2-3: Product: CSSD-R60GB2 [ 107.162908] usb 2-3: Manufacturer: Corsair [ 107.162910] usb 2-3: SerialNumber: 10111441000000990069 [ 107.167651] scsi7 : usb-storage 2-3:1.0 [ 108.195543] scsi 7:0:0:0: Direct-Access Corsair CSSD-R60GB2 PQ: 1 ANSI: 0 [ 108.197732] scsi 7:0:0:0: Attached scsi generic sg3 type 0

  Read the article

• Where's my free space gone? (on my mac) [closed]

  - by Cawas

  Possible Duplicate: Something’s slowly eating my HD space Somehow part of my files from my USB disk, 40GB of it (exactly the space I was missing), were copied to /Volumes/ and when I mounted the disk it was called "600GB Disk 2", while "600GB Disk" was filled with duplicated data. All that happened at once, slowly, just this morning when I turned on my macbook. I could notice that thanks to Disk Inventory X. I could actually see those on GrandPerspective, but I thought it was just scanning my USB limited to that folder for whatever reason. On Disk Inventory I could see the /Volumes/ listing one folder as a folder and the second one as a link, like it should be. Well, looking at that folder, I quickly associated what was in it with my scheduled backup on Carbon Copy Cloner. I'm still not sure why the USB disk was mounted with wrong name, but what happened was CCC store the full path information of the source and destination, so when it tried to do the schedule backup it created the path that didn't exist, and copied everything there - while it should be copying into the mounted volume. While this is solved this time, what else could I have done to diagnose this kind of issue, for the next time?

  Read the article

• Recursive move utility on Unix?

  - by Thomas Vander Stichele

  Sometimes I have two trees that used to have the same content, but have grown out of sync (because I moved disks around or whatever). A good example is a tree where I mirror upstream packages from Fedora. I want to merge those two trees again by moving all of the files from tree1 into tree2. Usually I do this with: rsync -arv tree1/* tree2 Then delete tree1. However, this takes an awful lot of time and disk space, and it would be much easier to be able to do: mv -r tree1/* tree2 In other words, a recursive move. It would be faster because first of all it would not even copy, just move the inodes, and second I wouldn't need a delete at the end. Does this exist ? As a test case, consider the following sequence of commands: $ mkdir -p a/b $ touch a/b/c1 $ rsync -arv a/ a2 sending incremental file list created directory ./ b/ b/c1 b/c2 sent 173 bytes received 57 bytes 460.00 bytes/sec total size is 0 speedup is 0.00 $ touch a/b/c2 What command would now have the effect of moving a/b/c2 to a2/b/c2 and then deleting the a subtree (since everything in it is already in the destination tree) ?

  Read the article

• How to detect a change in a background window

  - by Leonardo

  Hi, Let's say I have a chat window open in a web browser, and I'm waiting for a message from my partner, trying to do something else in the meantime. The chat window (not an installed program) will not alert me of an incoming message, nor will the task bar flash or anything. Is there any utility that can help me? In search of a solution, I came across AutoHotKey. There is a script called livewindows.ahk, which will show a piece of the window anywhere on the screen, but it won't alert me on a change. I'm not skilled enough to know how to store and compare e.g. every second's content of some window area. Maybe someone has invented this wheel? Thanks in advance for any hint or advice. Leonardo

  Read the article

• Will using FAT32 provide better pagefile performance than NTFS?

  - by llazzaro

  Hello, I was discussing with my others personalities, and came up with a conflict. In http://technet.microsoft.com/en-us/library/cc938440.aspx , says that FAT32 is faster when using smaller volumes. Ok separate disk, will give more performance than same disk. But did anyone test this? Scenario 1 : Separate hard disk FAT32 (small volume) Scenario 2 : Separate hard disk NTFS which one will win? minimum gain?

  Read the article

• Using dd command and running out of space while cloning drive to img

  - by Alan Kuras

  I have a problem with drive cloning. Im using dd on damaged disk with bad sectors trying to make an image from it. Im booting computer with Live Linux CD . Damaged disk: sda 146GB (NTFS) External drive: sdb 300GB (NTFS) After running the command below im running out of space on disk sdb. dd if=/dev/sda of=/dev/sdb/hdd.img bs=4096 conv=noerror,sync The question is why im running out of space on disk sdb ?

  Read the article

• How to turn off verification after DVD burning on OS X?

  - by raoulsson

  Hi, I use the built in DVD burner from OS X. Whenever I burn a disk, it is verified after burning. Nice, but I am usually quicker in verifying myself with a bit more human, maybe more error prone process... Just takes too long! Is there a way to turn this off in OS X? Thanks!

  Read the article

• Super Uninstallers that can be run from a USB Flash Drive?

  - by JFV

  Does anyone know of a 'Super Uninstaller' package that will allow you to run it from a USB Flash Drive? I used to have a CD that was a Super Uninstaller utility that would uninstall anything. I can't seem to find it and I'd like to replace it with one that I can run from a flash drive. I'd like the portability to now have to install it on each computer I'm using it on. Any and all suggestions would be helpful! Thanks! JFV

  Read the article

• rdisk value in boot.ini maps to which disk?

  - by MA1

  Hi All Following are the contents of a sample boot.ini: [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /NOEXECUTE=OPTIN /FASTDETECT multi(0)disk(0)rdisk(0)partition(2)\WINNT="Windows 2000 Professional" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /NOEXECUTE=OPTIN /FASTDETECT rdisk value tells the physical disk number. so, if i have three hard disks say: /dev/sda /dev/sdb /dev/sdc than how to know which disk(/dev/sda or /dev/sdb or /dev/sdc) is rdisk(0) and which disk is rdisk(1) etc Regards,

  Read the article

• How can old DOS utilities be incompatible with x64?

  - by Dims

  I found that ARJ.EXE archiver does not run under Windows 7 x64. Bot how can it be? The task of the achiver is to do some very basic file IO. How can it be so? Also I found that apparently no any old command line utility does not run under Windows 7 x64. Also I found that there is no any compatibility option for this case. Is this a very great Microsoft sabotage? Are there any ways to overcome this? Thanks

  Read the article

• Set one homepage for all browsers simultaneously

  - by MorganTiley

  For testing purposes, I would like to set the homepage of all browsers installed on my computer — Internet Explorer, Chrome, Firefox and Safari — to the same page. I'd like to do this all at the same time. I imagine that there's an application that has an input box for the URL I want to use as homepage and an OK button to set it in all browsers. Where can I get a utility or script that can do this?

  Read the article

• vmware vmdk disk problem

  - by dmtr

  I have a VMware ESXi 4 server and 2 storage servers (mounted via nfs). Between the storage servers (Fedora 14) is a drbd cluster (dual primary) and ocfs2 filesystem; also every server has a local partition with an ext4 filesystem, both are mounted via nfs on the esxi server. When I tried to copy a virtual machine (naturally it was powered off) from the ext4 partition to the ocfs2 partition, the vmdk total file size is different, but the md5sum is the same. On the ext4 partition: # ls -la total 28492228 -rw------- 1 root root 42949672960 Jan 14 14:46 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 On the ocfs2 partition: # ls -la total 13974660 -rw------- 1 root root 42949672960 Jan 14 16:16 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 When I power on the virtual machine from the ocfs2 partition it dosn't work. I have a windows on the virtual machine and it freez?s after the windows logo. From the ext4 partition the virtual machine workes. I tested with linux (created and installed on ext4 partition and then copied to the ocfs2) and the same problem appears. When I create a virtual machine directly from ocfs2 partition, there are no problems. I tried to copy via vSphere client, and I have the same problem. Any suggestions?

  Read the article

• My Western Digital 500GB Passport disk says "not formatted" when I plug it in Windows

  - by learnerforever

  Hi, When I plug my Western Digital 500 GB Passport disk in my Windows machine, it says "not formatted, do you want to format it" something. I started having this problem after I put it in an old desktop at home. I don't exactly know what went wrong. May be partition table is corrupted etc. Questions: Some quick search on internet tells me there are partition fixing utilities, which can fix corrupted partition table. testdisk being one of such utiities. I can understand how to use this to copy files from the disk to some other location, but I would like to fix the partition table in-place so that I don't have to temporary move around my data of approx size 300GB, then format passport disk and then again bring back the data. Is there any way I can fix the partition table in-place? Also, how to know which file system was there originally in the disk? Can I only keep the same file system? My current laptop is running Windows 7. Earlier I used to use Windows Vista. My other laptop has Windows XP. So I have access to Windows 7 and Windows XP. Please help! Thanks,

  Read the article

• Strange windows boot problem - My computer won't boot from hard disk

  - by user29779

  Hello, Until yesterday, I had windows XP installed on my computer. After installing the OS, and setting the BIOS to boot from the hard-disk first, I discovered a strange problem - the OS wasn't booted and the only way I could get it to load was to insert a windows installation disk, enter repair mode, do "fixboot" and restart. The problem only occured when the computer was booted after shut-down. If I only restarted it, everything worked fine. Yesterday, I upgraded my XP to win7 and the problem persists. I tried the same "trick" I did with XP to get it to load, by entering repair and doing "bootrec /fixmbr" and "bootrec /fixboot" but that didn't work (and when I run "scanos" it didn't find any windows installations). Eventually, I got it to load by changing the settings in the BIOS to boot from CD first and HD second, removing the installation disk from the drive, letting it fail to boot from CD and then re-insert the disk. Anyone has any idea what may be the cause or how can I investigate this issue? Thanks! Marina

  Read the article

• a disk read error occurred

  - by kellogs

  Hi, ¨a disk read error occurred¨ appears on screen after choosing to boot into Windows XP from GRUB. [root@localhost linux]# fdisk -lu Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x48424841 Device Boot Start End Blocks Id System /dev/sda1 63 204214271 102107104+ 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 204214272 255606783 25696256 af HFS / HFS+ Partition 2 does not end on cylinder boundary. /dev/sda3 255606784 276488191 10440704 c W95 FAT32 (LBA) Partition 3 does not end on cylinder boundary. /dev/sda4 276490179 312576704 18043263 5 Extended /dev/sda5 * 276490240 286709759 5109760 83 Linux /dev/sda6 286712118 310488254 11888068+ b W95 FAT32 /dev/sda7 310488318 312576704 1044193+ 82 Linux swap / Solaris sda is a 160GB hard disk with quite a few partitions and 3 OSes installed. I am able to boot into Linux and Mac OS fine, but not into Windows anymore. The Windows system is located on /dev/sda1. I can not recall how exactly have I used testdisk but it once said that ¨The harddisk /dev/sda (160GB / 149 GB) seems too small! (< 172GB / 157GB)¨ or something simillar. So far I have tried to ¨fixboot¨ and ¨chkdsk¨ from a recovery console on the affected windows partition (/dev/sda1), the plug off power cord for 15 seconds trick, reinstalling GRUB, repairing the MFT and boot sector of the affected partition via testdisk, what next please ? Thank you!

  Read the article

• vmware vmdk disk problem

  - by dmtr

  Hello, I have a vmware esxi 4 server and 2 storage servers (mount as nfs). Between the storage servers (fedora 14) is made drbd cluster (dual primary) and ocfs2 filesystem, also every server has local partition with ext4 filesystem, both are mounted as nfs on esxi server. When i tried to copy a virtual machine (naturally it power off) files from ext4 partition to ocfs2 partition, vmdk total file size is different, but md5sum is the same. on ext4 partition: # ls -la total 28492228 -rw------- 1 root root 42949672960 Jan 14 14:46 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 on ocfs2 partition: # ls -la total 13974660 -rw------- 1 root root 42949672960 Jan 14 16:16 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 When i power on the virtual machine from ocfs2 partition it dosn't work. I have a windows on the virtual machine and it freez?s after windows logo. From ext4 partition the virtual machine is worked. Test with linux (create and install on ext4 partition and copy) the same problem appears. When i create a virtual machine directly from ocfs2 partition, there are no problems. I tried to copy via vSphere client, and i have the same problem. Any suggestions ?

  Read the article

• Expand disk space on Ubuntu 10.04 (VMWare Guest)

  - by Jason Clawson

  I need to resize the disk space of an ubuntu guest in VMWare Workstation. After using the expand disk utility in vmware workstation, I need to do some linux magic to resize the parition. I have searched and found a lot of posts about resizing it. Unfortunately I don't really understand it all that well. Can anyone help me out with this? df -h gives me: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 19G 2.6G 16G 15% / none 496M 172K 495M 1% /dev none 500M 0 500M 0% /dev/shm none 500M 64K 500M 1% /var/run none 500M 0 500M 0% /var/lock none 500M 0 500M 0% /lib/init/rw none 19G 2.6G 16G 15% /var/lib/ureadahead/debugfs /dev/sda1 228M 36M 181M 17% /boot lvs says: LV VG Attr LSize Origin Snap% Move Log Copy% Convert root ubuntu -wi-ao 18.88g swap_1 ubuntu -wi-ao 884.00m fdisk -l says: Disk /dev/sda: 21.5 GB, 21474836480 bytes 255 heads, 63 sectors/track, 2610 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00033718 Device Boot Start End Blocks Id System /dev/sda1 * 1 32 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 32 2611 20719617 5 Extended /dev/sda5 32 2611 20719616 8e Linux LVM I really appreciate the help.

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >