Search Results

Search found 24121 results on 965 pages for 'display driver'.

Page 30/965 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• ATI Proprietary Driver Over/Underscan setting ignored after reboot

  - by Lassi

  I installed the proprietary driver (fglrx-updates) on Ubuntu 12.10 64-bit for my graphics card (ATI Radeon HD 7570). I am using two displays, one connected with DVI, one with HDMI. I set the desktop to be expanded to both screens and disabled the under scan for the HDMI screen, which is always for some reason enabled on HDMI screens. Now the issue. Everything was fine until I restarted my computer. After reboot, the screen connected with HDMI cable had the black borders again, meaning that the under scan is again enabled. I checked the ATI CCC, and under scan was disabled. However, moving the slider to enable under scan and then back to zero fixed the issue -- temporarily. The same issue is repeated every time I restart my computer. The settings remains the same, but the computer seems to ignore it. Any ideas how I could solve the issue?

  Read the article

• Broadcom STA driver doesn't work well with BCM4313

  - by Oli

  Following on from my other question about our new Samsung Q330, I've noticed that the wireless is incredibly flakey. It can connect but after a little use, especially if it does a lot of downloading at once (read: install something from the Software Centre), the connection stops working. Network Manager still see the connection, there's just no network throughput. I've simple tests like pinging other local network hosts and they just fail. The Samsung Q330 has a Broadcom BCM4313 wifi card (it's proper ID: 14e4:4727) and it's running on the Broadcom STA drivers that Jockey suggests (it didn't work at all without this). I did try installing b43-fwcutter but this just didn't do anything. I was expecting a configuration screen to come up (to select a firmware) but it never did. This page suggests the newer brcm80211 driver might be able to help, but I don't know how to install that. If you think this is the right route, please let me know how one goes about installing it.

  Read the article

• Problem with graphic Ubuntu 12.04 (not sure if it's because of the graphic driver)

  - by Duy Nguyen

  Ubuntu 12.04 was functioning properly . Then after an update, some graphic elements stop working properly. I could not launch programs that has 3D elements. Work space switcher's window displays 2D window instead of a 3D like usual. In Details menu, the Graphic row is blank. I am using Intel GMA 4500MHD graphic card. I am guessing that the driver is not properly installed? Anyone has the same issue? Please help!

  Read the article

• Proprietary Driver missing after Kernel upgrade

  - by Chris

  I recently upgraded my kernel to the Linux 3.4 kernel. Upon doing so, I found that it zapped my proprietary driver for my graphics card. As an alternative, I had saved Catalyst 12.8, but now it will not open through Software Center. I tried several other terminal methods, but it seems that many of these postings are bunk. They only work until you're almost done and then you get errors. I just need a little help from somebody who has been there, as I am new to Ubuntu. I'm kind of afraid to reboot because this is my 3rd full load of Ubuntu. Any ideas?

  Read the article

• Install reliance Driver software in ubuntu 14.04

  - by A Umar Mukthar

  I'm Using Huawei ec 150 dongle. I need to install driver software It is quiet a big task for begineers in linux. So i took this matter over here. EDIT Output of lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 12d1:140b Huawei Technologies Co., Ltd. EC1260 Wireless Data Modem HSD USB Card Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 046d:c05a Logitech, Inc. M90/M100 Optical Mouse Bus 002 Device 002: ID 046d:c31d Logitech, Inc. Media Keyboard K200 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

  Read the article

• No Wireless In Ubuntu 13.10 (maybe Need Wireless Driver) [duplicate]

  - by viktorhubinette

  This question already has an answer here: No Wireless In Ubuntu 13.10 2 answers hi after updating to ubuntu 13.10 i cant see the wireless networks on the network meny so what should i do ? tell me some commands you need to see to solve the problem. Thanks (i maybe need a wireless driver becouse i installed one when i haved 12.04 becouse i could not connect to wireless before too) i cant connect to wireless that my problem so what do i need to do to get this wireless working again? some outputs lsmod | grep rt1 nothing sudo modprobe rt18192cu FATAL: Module rt18192cu not found. iwconfig eth0 no wireless extensions. lo no wireless extensions. sudo iwlist wlan0 scan wlan0 Interface doesn't support scanning. rfkill list all nothing

  Read the article

• wireless driver error after install

  - by James

  after following this command to update wifi drivers:1- Boot into Ubuntu 2- Open a terminal by pressing Ctrl+Alt+T 3- Type in the following (verbatim!) sudo apt-get update && sudo apt-get upgrade press Enter, the command will prompt for your password (the one you use to login into Ubuntu), type it and press Enter. Wait for it to finish updating your system. Now type: sudo apt-get remove bcmwl-kernel-source sudo apt-get install firmware-b43-installer Wait for the command to finish installing the driver, when done restart your computer. i get a message after the first command when installing has done saying not enough space so it aborts! what do i do to fix this

  Read the article

• Xen 4.1 + NVidia driver = Unity has no window decorations

  - by Shade

  I am running Ubuntu 11.10 with Unity. I installed XEN and booted its kernel. The machine booted normally. However, when I started Unity (3D), there were no window decorations. I tried Unity 2D and the window decorations are present there. I then decided to remove the driver (installed through Additional Drivers) and install it manually like this: IGNORE_XEN_PRESENCE=y CC="gcc -DNV_VMAP_4_PRESENT -DNV_SIGNAL_STRUCT_RLIM" ./NVIDIA* ...but the window decorations were still missing in Unity 3D. The window decorations are there when I boot the regular Ubuntu kernel (without XEN support). What could be the problem and how to fix it?

  Read the article

• Compiz does not work with proprietary nvidia driver

  - by brandizzi

  I have a ThinkPad T420 with an NVidia Quadro video card. It crashes constantly when I close this lid (if you are curious..) and I suspect on a problem with nouveau drivers, so I installed the proprietary NVidia drivers. Howeer, when I install and use this driver, Compiz does not work. If I start a session with uses Compiz, no window manager/decorator is presented. I just can get Metacity working. Does anyone has any idea about what may be causing this problem?

  Read the article

• Non-unique display names?

  - by Davy8

  I know of at least big title game (Starcraft II) that doesn't require unique display names, so it would seem like it can work in at least some circumstance. Under what situations does allowing non-unique display names work well? When does it not work well? Does it come down to whether or not impersonation of someone else is a problem? The reasons I believe it works for Starcraft II is that there isn't any kind of in-game trading of virtual goods and other than "for kicks" there isn't much incentive to impersonate someone else in the game. There's also ladder rankings so even trying to impersonate a pro is easily detectable unless you're on a similar skill level. What are some other cases where it makes sense to specifically allow or disallow duplicate display names? (I have no idea what to tag this as. I went with game-design because I needed at least 1 tag and I don't have rep to create new ones yet.)

  Read the article

• Beginner help with compiling a driver into the kernel so my ethernet works

  - by MattC

  I have a Acer Aspire Revo nettop and it seems like it's a common error that Ubuntu doesn't have a driver for the ethernet. Someone recommend following the steps on this page. http://manpages.ubuntu.com/manpages/jaunty/man4/nfe.4freebsd.html The only problem is that I have no clue what to do really. I'm almost like an absolute beginner with linux and was hoping to play with it by doing some apache+php+mysql stuff, however I cannot at the moment. Where is the kernel configuration file? and where is the loader.conf file?

  Read the article

• Attach Keyboard/Mouse to X Display in Dell XPS L502x Dual Video Cards (Intel/Nvidia HDMI)

  - by lcoronelp

  The idea: Use a second monitor in Dell XPS L502x with HDMI port in Ubuntu 12.04 The process: I connect the HDMI cable to monitor. I read this and I have video in HDMI monitor with Bumblebee and this commands: optirun nvidia-settings -c :8 DISPLAY=:8.0 firefox I have created a second keyboard/mouse master group with xinput with this solution. The problem: The second monitor (Display 8) doesn't recognize the keyboard/mouse and I cant use it. The question: Do you know some command to attach the keyboard/mouse master group to Display 8? I think that xinput -set-cs may work but it does not.

  Read the article

• HW resources for the device driver [closed]

  - by VladimirLenin

  Need to provide memory and IRQ resources to the Linux kernel in order to bring up the CAN controller. Have no idea how to get them. Below is the structure I need to fill in. This structure I have taken for example, this is for the Run-Time Clock, but I need for CAN controller. Both are on the same board, and there are constants for RT Clock (and all other devices), but not for my CAN chip. When looking at the subject chip driver's code (sp_probe() function), I see it needs the same type resources. struct resource tegra_rtc_resources[] = { [0] = { .start = ???, .end = ???, .flags = IORESOURCE_MEM, }, [1] = { .start = ???, .end = ???, .flags = IORESOURCE_IRQ, }, };

  Read the article

• "input not supported" at login screen after ati driver is installed

  - by squalo78

  I'm running ubuntu 11.10 and I installed the Ati driver from the oficial page. When i reboot, the grub and the splash screen are working (at lower resolution) but instead of the login screen, it shows "input not supported" message. If I use "Ctrl+Alt+ keypad +" I can see my login screen at 640x480 resolution and login. I don't know how to make login screen displays 1440x900@60, that is the resolution set on my session. I'm running Ubuntu 11.10 with ati hd4200 video card, a monitor acer aL1916w that supports the resolution 1440x900.

  Read the article

• Unwittingly activate wrong wireless driver and now cannot activate the correct one

  - by Sumeth Chaochuti

  I just installed Kubuntu 10.10 on my MacBook 3,1 and found no wireless connection. Using KPackageKit I activated Broadcom b43 because it had already been selected for me. When I subsequently tried to activate Broadcom STA, however, I was returned with an error. After reading Jockey log I removed the wrong driver and reinstalled all drivers so that I can activate the correct one. It hasn't work even though KPackageKit now shows that I have installed: bcmwl-kernel-source bcmwl-modaliases broadcom-sta-common broadcom-sta-source According to the log it appears as if there are conflicts but I don't know how to rectify it. I'm completely new to the platform, just started using Kubuntu 2 days ago. I'll appreciate any advice anyone can give. Thanks.

  Read the article

• Installing driver for Ralink Realtek 8187 WiFi adapter

  - by capcom

  I purchased a WiFi adapter online, and it came with an installation CD with drivers. I installed it just fine on Windows, and am now trying on Ubuntu 10.10. The CD came with the driver files for Linux as well, but I have no idea why they aren't working - my guess is that I don't properly understand what to do with them. I have uploaded the contents of the folder which came with the CD here. There is a README in there, but the instructions under the installation header didn't get me anywhere unfortunately. The Device ID is: Bus 001 Device 002: ID 148f:5370 Ralink Technology, Corp. Thanks.

  Read the article

• Switching to an external display, when primary is broken

  - by Shazzner

  I've successfully install Ubuntu 11.10 Desktop (x86) on an old(er) laptop that unfortunately has a broken screen, so there is an external monitor plugged in. On the livecd it come up on the secondary display just fine and I was able to install ubuntu and everything. Unfortunately when I reboot into Ubuntu proper now, the secondary display is off and I'm literally driving blind here trying to switch it to the secondary display. Using Nvidia open source drivers. Things I've tried: Rebooting back into livecd, mounting the partition and trying in vain to find a config file (it uses the open source drivers so no Xorg.conf I could edit manually) Trying to blind-type xrandr settings into what I hope is terminal: xrandr --output VGA1 --auto (nothing happened) Trying to blind install openssh-server so I could ssh into it and maybe configure it from my working computer. For some reason though, no luck. Ubuntu really should default to expanding to all screens for this use case.

  Read the article

• screen driver problem

  - by exilada

  I have Intel HD 3000 graphics card onboard and nvidia 520 mx optimus techolonogy card. I was try to install Nvidia driver but it was failure. Now I cant use anything. Have one resolution 640x480 every media disconnected and I cant connect $ xrandr Screen 0: minimum 320 x 200, current 640 x 480, maximum 8192 x 8192 LVDS1 connected 640x480+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 640x480 59.9* VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09 ) glxinfo | grep vendor server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: Tungsten Graphics, Inc Blockquote something wrong here I guess I try to some solutions but didnt work even it cant nvidia-xconfig file after these By the way system get eror sometimes about xorg Sorry for my English thaks for help.

  Read the article

• alx driver not working properly

  - by user292768

  My alx driver seems to be working fine for everything except apt-get. I can navigate to web pages, the ping command works just fine, but whenever I try to do apt-get update or apt-get install it hangs on trying to connect to whatever archive it's trying to pull info from. There's no error message, nothing to imply that it can't connect, it just hangs there and does nothing at all. I've tried re installing alx, upgrading/downgrading my linux kernel, downloading source and building alx from scratch, etc etc but nothing works. Does anybody else have this problem/know how to fix it?

  Read the article

• What driver for nVIDIA GeForce MX440?

  - by ubufan

  I have recently installed (clean install) Ubuntu 12.10 on a desktop PC with nVIDIA GeForce MX440 (AGP 8x) and I have problems with Unity. Although I can see the desktop, however i can't see unity bar and icons. So, I decided to install lubuntu-desktop to see the performance. And yes! I choose lubuntu-desktop from Log On screen and the performance is definetely much better and has nothing to do with the aforementioned on unity. The system has native drivers from the Ubuntu installation. I didn't touch anything in xorg configuration. I also remember that I have managed to have the best performance with this graphic card on my previous Ubuntu 9.10 system, by editing some values in /etc/X11/xorg.conf file. But I can't remember that options, because I formatted the / partition! My question is: Which is the most suitable driver for this card, in order to load the unity feature and have better performance on it?

  Read the article

• Ubuntu 11.10 boot: xhost: unable to open display

  - by paulus_almighty

  I've had this papercut for a while now, it's time it was fixed. When I boot up Ubuntu, choosing "Ubuntu...generic" from the grub screen, Ubuntu fails to load. It just sits at the driver/module loading screen. What seems to be the most significant line in this output is "xhost: unable to open display" If I choose "Ubuntu...(recovery mode)" from grub then it loads OK. I don't get why this is. Out of interest I tried enabling boot error logging with #/etc/default/bootlogd BOOTLOGD_ENABLE=Yes but I'm not seeing anything in that file. ETA: I've had this problem since fresh install of 11.10. Here's lshw: $ sudo lshw -C display *-display description: VGA compatible controller product: GF104 [GeForce GTX 460] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:03:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f6000000-f7ffffff memory:e0000000-e7ffffff memory:ec000000-efffffff ioport:bf00(size=128) memory:e8000000-e807ffff

  Read the article

• Display settings problems with Ubuntu 14.04 LTS

  - by DontUSASme

  For whatever reason (this was working correctly on Ubuntu 12.04 LTS) when I try to set my displays on top of each other in the settings, it won't allow to place them on top of each other. When I click "apply" I get the error message "Could Not Set Configuration Mode for CRTC 63." Can anybody help me with this? It wont let me set the two displays on top of each other, but it will allow me to place them side to side. Also, I get a random "Unknown display" as well. This was not existent in 12.04 LTS and I have no idea what it is, seeing as how the only screens that are in use, or plugged up for that matter, is my laptop's display (1366x768) and my Samsung TV display (1360x768) thru HDMI.

  Read the article

• Laptop LCD sometimes stops working on reboot. Please help.

  - by J Ringle

  I have a Gateway P-6831FX Laptop with Vista Ultimate. The Laptop LCD will sometimes not come on after I reboot the computer. I don't even close the lid and it happens. It isn't dim, it doesn't come on at all. No posting of CMOS (BIOS), nothing. Please note... this happens sometimes, not every time. Frustrating! When plugged into an external monitor, which works fine, Vista display properties can't even "sense" the laptop LCD. I try to enable the laptop LCD for dual display, turning on the laptop LCD, and it does nothing. It's like the laptop LCD is not even there. Manually taking a magnet in my hand to the laptop lid sensing switch (the sensor that turns off display/sleep mode when you close lid), sometimes causes the LCD backlight to "turn on" but not display any images. By "turn on" I mean I can see the screen backlight turn on to a 'dark gray' screen instead of pitch black. Subsequent reboot the laptop display is not working again! Here are the facts: Only happens at random and only after a reboot. Waking from Sleep mode isn't a problem. Pressing F4 function key for dual display does nothing when this happens. Closing lid doesn't seem to be related. (unless it is only after reboot.) using external magnet from laptop screen sensor sometimes triggers backlight to turn on but reboot back to square one with no LCD display. an external display always works fine. I have taken apart LCD, checked all wires and ribbons for loose connections or damage. I have replaced the Inverter. It doesn't seem to be heat related as I can put in sleep mode and resume fine when very hot. (external monitor works fine too). Sometimes the screen works fine as if there is not a problem at all. Even after a reboot... This is random. Any ideas out there? If it is a bad part... which one? The LCD seems to be fine. What are the odds of 2 bad inverters? The backlight is fine. The LCD wires/ribbons seem to be fine. I am at a loss. No warranty left and Gateway tech support is clueless. Thanks for any feedback that might help.

  Read the article

• Dell XPS L502Xnot detecting monitor-TV

  - by Guilherme Z. Santos

  I'm running Ubuntu 12.04 LTS on a Dell XPS L502X and when I connect the HDMI cable from the TV to the computer Ubuntu detects nothing at all, It works perfectly fine in Windows 7 though. I've already went to the Display control, plugged and unplugged the TV, clicked the Detect Displays button, and nothing. Do I have to activate the HDMI output or something? Because I used another computer with a VGA output and it worked perfectly.

  Read the article

• Replace LightDM with MDM on Ubuntu 13.10

  - by Daniel

  I'm trying to replace LighDM with MDM on Ubuntu 13.10, but there already is package in Ubuntu sources called mdm. It's not display manager, but "The Middleman System"... So the PPA install doesn't work. I tried installing .deb package and it changed login screen, but gave me an error message after login and then X stopped. I had to revert back... Any ideas on how to install mdm on Ubuntu 13.10...???

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >