Search Results

Search found 1046 results on 42 pages for 'iterator facade'.

Page 30/42 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• NServiceBus Generic Host and mqsvc.exe high CPU

  - by Michael Stephenson

  We have been doing some work with NServiceBus recently and observed some unusual behaviour which was caused by our mistake and seemed worthy of a small post.   The Scenario In our solution we were doing some standard NServiceBus stuff by pushing a message to a queue using NServiceBus.  We had a direct send/receive scenario rather than a publish/subscribe one.   The background process which was meant to collect the message and then process it was a normal NServiceBus message handler.  We would run the NServiceBus.Host.exe which would find the handler and then do the usual NServiceBus magic.   The Problem In this solution we were creating some automated tests around this module of the integration process to ensure that it would work well.  We had two tests.   Test 1 This test would start NServiceBus.Host.exe using the Process object, then seed a message to the queue via our web service façade sitting above the queue which wrapped NServiceBus.  The background process would then process the message and the test would check the message had been processed fine.   If all was well then the NServiceBus.Host.exe process was stopped.   Test 2 In test 2 we would do a very similar thing except that instead of starting the process the test would install NServiceBus.Host.exe as a windows service and then start the service before the test and once the test was executed it would stop the test.   The Results of the Tests Test 1 worked really well, however in test 2 we found that it didn’t really work at all, instead of doing the background process we were finding that between mqsvc.exe and NServiceBus.Host.exe the CPU on the machine was maxed and nothing was really happening.   The Solution After trying a few things we found it was the permissions on the queue were not set correctly.  Once this was resolved it all worked fine and CPU was not excessive and ran just like the console application.   I think the couple of take aways from this are:   Make sure you set the windows service for NserviceBus Generic Host to the right credentials When you install the generic host as a windows service then by default it will use the default windows credentials.  For any production like scenario you should be using a domain account to run the process as via the windows service. Make sure you have the queue set with the right permissions For the credentials you have used to configure the generic host as a windows service you should ensure that this user has the appropriate permissions for any queues it will interact with. Make sure you turn on the right logging configuration in NServiceBus When this wasnt working correctly we didnt know there was an issue, we were just experiencing the high CPU condition.  I am a little surprised that there wasnt something logged and that the process didnt crash.  I guess this could be by design bearing in mind that the process could be monitoring many queues.  In this point Im just saying that originally we didnt have all of the log4net logging which is available from NServiceBus turned on.  Its probably a good idea to have this turned on and configured until you are happy your solution is working fine.   Thanks to Ahmed Hashmi on my team who got this working in the end.

  Read the article

• NFJS Central Iowa Software Symposium Des Moines Trip Report

  - by reza_rahman

  As some of you may be aware, I recently joined the well-respected US based No Fluff Just Stuff (NFJS) Tour. If you work in the US and still don't know what the No Fluff Just Stuff (NFJS) Tour is, you are doing yourself a very serious disfavor. NFJS is by far the cheapest and most effective way to stay up to date through some world class speakers and talks. Following the US cultural tradition of old-fashioned roadshows, NFJS is basically a set program of speakers and topics offered at major US cities year round. The NFJS Central Iowa Software Symposium was held August 8 - 10 in Des Moines. The attendance at the event and my sessions was moderate by comparison to some of the other shows. It is one of the few events of it's kind that take place this part the country so it is extremely important. I had five talks total over two days, more or less back-to-back. The first one was my JavaScript + Java EE 7 talk titled "Using JavaScript/HTML5 Rich Clients with Java EE 7". This talk is basically about aligning EE 7 with the emerging JavaScript ecosystem (specifically AngularJS). The slide deck for the talk is here: JavaScript/HTML5 Rich Clients Using Java EE 7 from Reza Rahman The demo application code is posted on GitHub. The code should be a helpful resource if this development model is something that interests you. Do let me know if you need help with it but the instructions should be fairly self-explanatory. I am delivering this material at JavaOne 2014 as a two-hour tutorial. This should give me a little more bandwidth to dig a little deeper, especially on the JavaScript end. The second talk (on the second day) was our flagship Java EE 7/8 talk. Currently the talk is basically about Java EE 7 but I'm slowly evolving the talk to transform it into a Java EE 8 talk as we move forward. The following is the slide deck for the talk: JavaEE.Next(): Java EE 7, 8, and Beyond from Reza Rahman The next talk I delivered was my Cargo Tracker/Java EE + DDD talk. This talk basically overviews DDD and describes how DDD maps to Java EE using code examples/demos from the Cargo Tracker Java EE Blue Prints project. Applied Domain-Driven Design Blue Prints for Java EE from Reza Rahman The third was my talk titled "Using NoSQL with ~JPA, EclipseLink and Java EE". The talk covers an interesting gap that there is surprisingly little material on out there. The talk has three parts -- a birds-eye view of the NoSQL landscape, how to use NoSQL via a JPA centric facade using EclipseLink NoSQL, Hibernate OGM, DataNucleus, Kundera, Easy-Cassandra, etc and how to use NoSQL native APIs in Java EE via CDI. The slides for the talk are here: Using NoSQL with ~JPA, EclipseLink and Java EE from Reza Rahman The JPA based demo is available here, while the CDI based demo is available here. Both demos use MongoDB as the data store. Do let me know if you need help getting the demos up and running. I finishd off the event with a talk titled Building Java HTML5/WebSocket Applications with JSR 356. The talk introduces HTML 5 WebSocket, overviews JSR 356, tours the API and ends with a small WebSocket demo on GlassFish 4. The slide deck for the talk is posted below. Building Java HTML5/WebSocket Applications with JSR 356 from Reza Rahman The demo code is posted on GitHub: https://github.com/m-reza-rahman/hello-websocket. My next NFJS show is the Greater Atlanta Software Symposium on September 12 - 14. Here's my tour schedule so far, I'll keep you up-to-date as the tour goes forward: September 12 - 14, Atlanta. September 19 - 21, Boston. October 17 - 19, Seattle. I hope you'll take this opportunity to get some updates on Java EE as well as the other useful content on the tour?

  Read the article

• Validation and authorization in layered architecture

  - by SonOfPirate

  I know you are thinking (or maybe yelling), "not another question asking where validation belongs in a layered architecture?!?" Well, yes, but hopefully this will be a little bit of a different take on the subject. I am a firm believer that validation takes many forms, is context-based and varies at each level of the architecture. That is the basis for the post - helping to identify what type of validation should be performed in each layer. In addition, a question that often comes up is where authorization checks belong. The example scenario comes from an application for a catering business. Periodically during the day, a driver may turn in to the office any excess cash they've accumulated while taking the truck from site to site. The application allows a user to record the 'cash drop' by collecting the driver's ID, and the amount. Here's some skeleton code to illustrate the layers involved: public class CashDropApi // This is in the Service Facade Layer { [WebInvoke(Method = "POST")] public void AddCashDrop(NewCashDropContract contract) { // 1 Service.AddCashDrop(contract.Amount, contract.DriverId); } } public class CashDropService // This is the Application Service in the Domain Layer { public void AddCashDrop(Decimal amount, Int32 driverId) { // 2 CommandBus.Send(new AddCashDropCommand(amount, driverId)); } } internal class AddCashDropCommand // This is a command object in Domain Layer { public AddCashDropCommand(Decimal amount, Int32 driverId) { // 3 Amount = amount; DriverId = driverId; } public Decimal Amount { get; private set; } public Int32 DriverId { get; private set; } } internal class AddCashDropCommandHandler : IHandle<AddCashDropCommand> { internal ICashDropFactory Factory { get; set; } // Set by IoC container internal ICashDropRepository CashDrops { get; set; } // Set by IoC container internal IEmployeeRepository Employees { get; set; } // Set by IoC container public void Handle(AddCashDropCommand command) { // 4 var driver = Employees.GetById(command.DriverId); // 5 var authorizedBy = CurrentUser as Employee; // 6 var cashDrop = Factory.CreateCashDrop(command.Amount, driver, authorizedBy); // 7 CashDrops.Add(cashDrop); } } public class CashDropFactory { public CashDrop CreateCashDrop(Decimal amount, Employee driver, Employee authorizedBy) { // 8 return new CashDrop(amount, driver, authorizedBy, DateTime.Now); } } public class CashDrop // The domain object (entity) { public CashDrop(Decimal amount, Employee driver, Employee authorizedBy, DateTime at) { // 9 ... } } public class CashDropRepository // The implementation is in the Data Access Layer { public void Add(CashDrop item) { // 10 ... } } I've indicated 10 locations where I've seen validation checks placed in code. My question is what checks you would, if any, be performing at each given the following business rules (along with standard checks for length, range, format, type, etc): The amount of the cash drop must be greater than zero. The cash drop must have a valid Driver. The current user must be authorized to add cash drops (current user is not the driver). Please share your thoughts, how you have or would approach this scenario and the reasons for your choices.

  Read the article

• How can I test blades in MVC Turbine with Rhino Mocks?

  - by Brandon Linton

  I'm trying to set up blade unit tests in an MVC Turbine-derived site. The problem is that I can't seem to mock the IServiceLocator interface without hitting the following exception: System.BadImageFormatException: An attempt was made to load a program with an incorrect format. (Exception from HRESULT: 0x8007000B) at System.Reflection.Emit.TypeBuilder._TermCreateClass(Int32 handle, Module module) at System.Reflection.Emit.TypeBuilder.CreateTypeNoLock() at System.Reflection.Emit.TypeBuilder.CreateType() at Castle.DynamicProxy.Generators.Emitters.AbstractTypeEmitter.BuildType() at Castle.DynamicProxy.Generators.Emitters.AbstractTypeEmitter.BuildType() at Castle.DynamicProxy.Generators.InterfaceProxyWithTargetGenerator.GenerateCode(Type proxyTargetType, Type[] interfaces, ProxyGenerationOptions options) at Castle.DynamicProxy.DefaultProxyBuilder.CreateInterfaceProxyTypeWithoutTarget(Type interfaceToProxy, Type[] additionalInterfacesToProxy, ProxyGenerationOptions options) at Castle.DynamicProxy.ProxyGenerator.CreateInterfaceProxyTypeWithoutTarget(Type interfaceToProxy, Type[] additionalInterfacesToProxy, ProxyGenerationOptions options) at Castle.DynamicProxy.ProxyGenerator.CreateInterfaceProxyWithoutTarget(Type interfaceToProxy, Type[] additionalInterfacesToProxy, ProxyGenerationOptions options, IInterceptor[] interceptors) at Rhino.Mocks.MockRepository.MockInterface(CreateMockState mockStateFactory, Type type, Type[] extras) at Rhino.Mocks.MockRepository.CreateMockObject(Type type, CreateMockState factory, Type[] extras, Object[] argumentsForConstructor) at Rhino.Mocks.MockRepository.Stub(Type type, Object[] argumentsForConstructor) at Rhino.Mocks.MockRepository.<>c__DisplayClass1`1.<GenerateStub>b__0(MockRepository repo) at Rhino.Mocks.MockRepository.CreateMockInReplay<T>(Func`2 createMock) at Rhino.Mocks.MockRepository.GenerateStub<T>(Object[] argumentsForConstructor) at XXX.BladeTest.SetUp() Everything I search for regarding this error leads me to 32-bit vs. 64-bit DLL compilation issues, but MVC Turbine uses the service locator facade everywhere and we haven't had any other issues, just with using Rhino Mocks to attempt mocking it. It blows up on the second line of this NUnit set up method: IRotorContext _context; IServiceLocator _locator; [SetUp] public void SetUp() { _context = MockRepository.GenerateStub<IRotorContext>(); _locator = MockRepository.GenerateStub<IServiceLocator>(); _context.Expect(x => x.ServiceLocator).Return(_locator); } Just a quick aside; I've tried implementing a fake implementing IServiceLocator, thinking that I could just keep track of calls to the type registration methods. This won't work in our setup, because we extend the service locator's interface in such a way that if the type isn't Unity-based, the registration logic is not invoked.

  Read the article

• Database structure - is mySQL the right choice?

  - by Industrial

  Hi everyone, We are currently planning the database structure of a quite complex e-commerce web app that has flexibility as it's main cornerstone. Our app features a large amount of data (products) and we have run into a slight headache trying to keep performance high without compromizing normalization rules in the database, or leaving our highly beloved flexibility concept behind when integrating product options (also widely known as product attributes or parameters). Based on various references and sources available, we have made up lists on pros and cons of all major and well known database patterns to solve this. After comparing these, we have come up with two final alternatives: EAV (Entity-attribute-value model) : Pros: Database is used for all sorting. Cons: All related queries will include a number of joins between multiple tables in order to complete the collection of data. SLOB (Serialized LOB, also known as Facade?) : Pros: Very flexible. Keeping the number of necessary joins low compared to a EAV design pattern. Easy to update/add/remove data from each product. Cons: All sorting will be done by the application instead of the database. Will use lots of performance (memory?) when big datasets is processed by a large number of users. Our main questions: Which pattern/structure would you use, or maybe even a different solution? Is there better databases besides mySQL available nowadays to accomplish what we want? Thanks a lot! Reference: http://stackoverflow.com/questions/695752/product-table-many-kinds-of-product-each-product-has-many-parameters

  Read the article

• How should I handle persistence in a Java MUD? OptimisticLockException handling

  - by Chase

  I'm re-implementing a old BBS MUD game in Java with permission from the original developers. Currently I'm using Java EE 6 with EJB Session facades for the game logic and JPA for the persistence. A big reason I picked session beans is JTA. I'm more experienced with web apps in which if you get an OptimisticLockException you just catch it and tell the user their data is stale and they need to re-apply/re-submit. Responding with "try again" all the time in a multi-user game would make for a horrible experience. Given that I'd expect several people to be targeting a single monster during a fight I think the chance of an OptimisticLockException would be high. My view code, the part presenting a telnet CLI, is the EJB client. Should I be catching the PersistenceExceptions and TransactionRolledbackLocalExceptions and just retrying? How do you decide when to stop? Should I switch to pessimistic locking? Is persisting after every user command overkill? Should I be loading the entire world in RAM and dumping the state every couple of minutes? Do I make my session facade a EJB 3.1 singleton which would function as a choke point and therefore eliminating the need to do any type of JPA locking? EJB 3.1 singletons function as a multiple reader/single writer design (you annotate the methods as readers and writers). Basically, what is the best design and java persistence API for highly concurrent data changes in an application where it is not acceptable to present resubmit/retry prompts to the user?

  Read the article

• WCF Double Hop questions about Security and Binding.

  - by Ken Maglio

  Background information: .Net Website which calls a service (aka external service) facade on an app server in the DMZ. This external service then calls the internal service which is on our internal app server. From there that internal service calls a stored procedure (Linq to SQL Classes), and passes the serialized data back though to the external service, and from there back to the website. We've done this so any communication goes through an external layer (our external app server) and allows interoperability; we access our data just like our clients consuming our services. We've gotten to the point in our development where we have completed the system and it all works, the double hop acts as it should. However now we are working on securing the entire process. We are looking at using TransportWithMessageCredentials. We want to have WS2007HttpBinding for the external for interoperability, but then netTCPBinding for the bridge through the firewall for security and speed. Questions: If we choose WS2007HttpBinding as the external services binding, and netTCPBinding for the internal service is this possible? I know WS-* supports this as does netTCP, however do they play nice when passing credential information like user/pass? If we go to Kerberos, will this impact anything? We may want to do impersonation in the future. If you can when you answer post any reference links about why you're answering the way you are, that would be very helpful to us. Thanks!

  Read the article

• Wrappers/law of demeter seems to be an anti-pattern...

  - by Robert Fraser

  I've been reading up on this "Law of Demeter" thing, and it (and pure "wrapper" classes in general) seem to generally be anti patterns. Consider an implementation class: class Foo { void doSomething() { /* whatever */ } } Now consider two different implementations of another class: class Bar1 { private static Foo _foo = new Foo(); public static Foo getFoo() { return _foo; } } class Bar2 { private static Foo _foo = new Foo(); public static void doSomething() { _foo.doSomething(); } } And the ways to call said methods: callingMethod() { Bar1.getFoo().doSomething(); // Version 1 Bar2.doSomething(); // Version 2 } At first blush, version 1 seems a bit simpler, and follows the "rule of Demeter", hide Foo's implementation, etc, etc. But this ties any changes in Foo to Bar. For example, if a parameter is added to doSomething, then we have: class Foo { void doSomething(int x) { /* whatever */ } } class Bar1 { private static Foo _foo = new Foo(); public static Foo getFoo() { return _foo; } } class Bar2 { private static Foo _foo = new Foo(); public static void doSomething(int x) { _foo.doSomething(x); } } callingMethod() { Bar1.getFoo().doSomething(5); // Version 1 Bar2.doSomething(5); // Version 2 } In both versions, Foo and callingMethod need to be changed, but in Version 2, Bar also needs to be changed. Can someone explain the advantage of having a wrapper/facade (with the exception of adapters or wrapping an external API or exposing an internal one).

  Read the article

• DDD and Client/Server apps

  - by Christophe Herreman

  I was wondering if any of you had successfully implemented DDD in a Client/Server app and would like to share some experiences. We are currently working on a smart client in Flex and a backend in Java. On the server we have a service layer exposed to the client that offers CRUD operations amongst some other service methods. I understand that in DDD these services should be repositories and services should be used to handle use cases that do not fit inside a repository. Right now, we mimic these services on the client behind an interface and inject implementations (Webservices, RMI, etc) via an IoC container. So some questions arise: should the server expose repositories to the client or do we need to have some sort of a facade (that is able to handle security for instance) should the client implement repositories (and DDD in general?) knowing that in the client, most of the logic is view related and real business logic lives on the server. All communication with the server happens asynchronously and we have a single threaded programming model on the client. how about mapping client to server objects and vice versa? We tried DTO's but reverted back to exposing the state of our objects and mapping directly to them. I know this is considered bad practice, but it saves us an incredible amount of time) In general I think a new generation of applications is coming with the growth of Flex, Silverlight, JavaFX and I'm curious how DDD fits into this.

  Read the article

• DotNetOpenAuth / WebSecurity Basic Info Exchange

  - by Jammer

  I've gotten a good number of OAuth logins working on my site now. My implementation is based on the WebSecurity classes with amends to the code to suit my needs (I pulled the WebSecurity source into mine). However I'm now facing a new set of problems. In my application I have opted to make the user email address the login identifier of choice. It's naturally unique and suits this use case. However, the OAuth "standards" strikes again. Some providers will return your email address as "username" (Google) some will return the display name (Facebook). As it stands I see to options given my particular scenario: Option 1 Pull even more framework source code into my solution until I can chase down where the OpenIdRelyingParty class is actually interacted with (via the DotNetOpenAuth.AspNet facade) and make addition information requests from the OpenID Providers. Option 2 When a user first logs in using an OpenID provider I can display a kind of "complete registration" form that requests missing info based on the provider selected.* Option 2 is the most immediate and probably the quickest to implement but also includes some code smells through having to do something different based on the provider selected. Option 1 will take longer but will ultimately make things more future proof. I will need to perform richer interactions down the line so this also has an edge in that regard. The more I get into the code it does seem that the WebSecurity class itself is actually very limiting as it hides lots of useful DotNetOpenAuth functionality in the name of making integration easier. Andrew (the author of DNOA) has said that the Attribute Exchange stuff happens in the OpenIdRelyingParty class but I cannot see from the DotNetOpenAuth.AspNet source code where this class is used so I'm unsure of what source would need to be pulled into my code in order to enable the functionality I need. Has anyone completely something similar?

  Read the article

• Is there a term for this concept, and does it exist in a static-typed language?

  - by Strilanc

  Recently I started noticing a repetition in some of my code. Of course, once you notice a repetition, it becomes grating. Which is why I'm asking this question. The idea is this: sometimes you write different versions of the same class: a raw version, a locked version, a read-only facade version, etc. These are common things to do to a class, but the translations are highly mechanical. Surround all the methods with lock acquires/releases, etc. In a dynamic language, you could write a function which did this to an instance of a class (eg. iterate over all the functions, replacing them with a version which acquires/releases a lock.). I think a good term for what I mean is 'reflected class'. You create a transformation which takes a class, and returns a modified-in-a-desired-way class. Synchronization is the easiest case, but there are others: make a class immutable [wrap methods so they clone, mutate the clone, and include it in the result], make a class readonly [assuming you can identify mutating methods], make a class appear to work with type A instead of type B, etc. The important part is that, in theory, these transformations make sense at compile-time. Even though an ActorModel<T> has methods which change depending on T, they depend on T in a specific way knowable at compile-time (ActorModel<T> methods would return a future of the original result type). I'm just wondering if this has been implemented in a language, and what it's called.

  Read the article

• Unit Testing the Use of TransactionScope

  - by Randolpho

  The preamble: I have designed a strongly interfaced and fully mockable data layer class that expects the business layer to create a TransactionScope when multiple calls should be included in a single transaction. The problem: I would like to unit test that my business layer makes use of a TransactionScope object when I expect it to. Unfortunately, the standard pattern for using TransactionScope is a follows: using(var scope = new TransactionScope()) { // transactional methods datalayer.InsertFoo(); datalayer.InsertBar(); scope.Complete(); } While this is a really great pattern in terms of usability for the programmer, testing that it's done seems... unpossible to me. I cannot detect that a transient object has been instantiated, let alone mock it to determine that a method was called on it. Yet my goal for coverage implies that I must. The Question: How can I go about building unit tests that ensure TransactionScope is used appropriately according to the standard pattern? Final Thoughts: I've considered a solution that would certainly provide the coverage I need, but have rejected it as overly complex and not conforming to the standard TransactionScope pattern. It involves adding a CreateTransactionScope method on my data layer object that returns an instance of TransactionScope. But because TransactionScope contains constructor logic and non-virtual methods and is therefore difficult if not impossible to mock, CreateTransactionScope would return an instance of DataLayerTransactionScope which would be a mockable facade into TransactionScope. While this might do the job it's complex and I would prefer to use the standard pattern. Is there a better way?

  Read the article

• N Tiers with SubSonic 3, Dirty Columns collection is alwayes empty on update

  - by Adel

  Hello guys here is what i am doing, and not working for me. I have a DAL generated with SubSonic 3 ActiveRecord template, i have a service layer (business layer if you well) that have mixture of facade and some validation. say i have a method on the Service layer like public void UpdateClient(Client client); in my GUI i create a Client object fill it with some data with ID and pass it to the service method and this never worked, the dirty columns collection (that track which columns are altered in order to use more efficant update statment) is alwayes empty. if i tried to get the object from database inside my GUI then pass it to the service method it's not working either. the only scenario i find working is if i query the object from the database and call Update() on the same context all inside my GUI and this defeats the whole service layer i've created. however for insert and delete everything working fine, i wonder if this have to do something with object tracking but what i know is SubSonic don't do that. please advice. thanks. Adel.

  Read the article

• Maven (EJB) project with client and server artifacts

  - by Cornel Masson

  Here's my variation on the "multiple artifacts from Maven build" question: I'm porting from Ant to Maven. My application is an EJB server that is packaged as an EAR, but it also exposes a client JAR for use by other client apps. This jar contains the EJB interfaces, facade class and some helpers. I know that the Maven way is to have one artifact per project (POM); however, both artifacts (server EAR and client JAR) need to be built from the same source tree - server and client share, for example, the EJB and 'home' interfaces. How do I do this in Maven? Do I have one project containing two POMs, say server-pom.xml & client-pom.xml? I was thinking I could also have a parent POM (pom.xml) that can be used to build both client and server with one foul swoop? However, the lifecycles diverge after the 'package' phase, since the server has to go through assembly (tar/gzip), while the client is done after 'package' and can simply be installed into the repository. Any advice/experience on the best way to approach this?

  Read the article

• Persist data when the table was not mapped (JPA EclipseLink)

  - by enrique

  Hi everybody I need some help in persisting data into a table that has not been mapped... The issue is that the database we have has a table which all of its columns are foreign keys so by mapping the whole database all of the tables are correctly mapped. However that table called "category" is not mapped. The way in which we can browse the data is by passing for the table I mentioned using the @jointable annotation which was set by the system in the other tables with which "category" has a relation. So we can go ahead and using the collections and perform a query. But the issue comes when I want to persist data into that table because there´s no any entity. We tried to persist through the collections but no luck. Then I have just tried by creating the entity with its PK and Facade all by hand. However when I try to persist using the Merge method the system tries to perform an Insert when it is supposed to perform an Update. So obviously it returns an error. Does anybody have an idea on this situation? Thanks.-

  Read the article

• How to get notified about changes of the history via history.pushState?

  - by Felix Kling

  So now that HTML5 introduces history.pushState to change the browsers history, websites start using this in combination with Ajax instead of changing the fragment identifier of the URL. Sadly that means that those calls cannot be detect anymore by onhashchange. My question is: Is there a reliable way (hack? ;)) to detect when a website uses history.pushState? The specification does not state anything about events that are raised (at least I couldn't find anything). I tried to create a facade and replaced window.history with my own JavaScript object, but it didn't have any effect at all. Further explanation: I'm developing a Firefox add-on that needs to detect these changes and act accordingly. I know there was a similar question a few days ago that asked whether listening to some DOM events would be efficient but I would rather not rely on that because these events can be generated for a lot of different reasons. Update: Here is a jsfiddle (use Firefox 4 or Chrome 8) that shows that onpopstate is not triggered when pushState is called (or am I doing something wrong? Feel free to improve it!). Update 2: Another (side) problem is that window.location is not updated when using pushState (but I read about this already here on SO I think).

  Read the article

• MySQL + Joomla + remote c# access

  - by Jimmy

  Hello, I work on a Joomla web site, installed on a MySQL database and running on IIS7. It's all working fine. I now need to add functionality that lets (Joomla-)registered users change some configuration data. Though I haven't done this yet, it looks straightforward enough to do with Joomla. The data is private so all external access will be done through HTTPS. I also need an existing c# program, running on another machine, to read that configuration data. Sure enough, this data access needs to be as fast as possible. The data will be small (and filtered by query), but the latency should be kept to a minimum. A short-term, client-side cache (less than a minute, in case a user updates his configuration data) seems like a good idea. I have done practically zero database/asp programming so far, so what's the best way of doing that last step? Should the c# program access the database 'directly' (using what? LINQ?) or setup some sort of Facade (SOAP?) service? If a service should be used, should it be done through Joomla or with ASP on IIS? Thanks

  Read the article

• Abstract Design Pattern implementation

  - by Pathachiever11

  I started learning design patterns a while ago (only covered facade and abstract so far, but am enjoying it). I'm looking to apply the Abstract pattern to a problem I have. The problem is: Supporting various Database systems using one abstract class and a set of methods and properties, which then the underlying concrete classes (inheriting from abstract class) would be implementing. I have created a DatabaseWrapper abstract class and have create SqlClientData and MSAccessData concrete class that inherit from the DatabaseWrapper. However, I'm still a bit confused about how the pattern goes as far as implementing these classes on the Client. Would I do the following?: DatabaseWrapper sqlClient = new SqlClientData(connectionString); This is what I saw in an example, but that is not what I'm looking for because I want to encapsulate the concrete classes; I only want the Client to use the abstract class. This is so I can support for more database systems in the future with minimal changes to the Client, and creating a new concrete class for the implementations. I'm still learning, so there might be a lot of things wrong here. Please tell me how I can encapsulate all the concrete classes, and if there is anything wrong with my approach. Many Thanks! PS: I'm very excited to get into software architecture, but still am a beginner, so take it easy on me. :)

  Read the article

• OIM 11g notification framework

  - by Rajesh G Kumar

  OIM 11g has introduced an improved and template based Notifications framework. New release has removed the limitation of sending text based emails (out-of-the-box emails) and enhanced to support html features. New release provides in-built out-of-the-box templates for events like 'Reset Password', 'Create User Self Service' , ‘User Deleted' etc. Also provides new APIs to support custom templates to send notifications out of OIM. OIM notification framework supports notification mechanism based on events, notification templates and template resolver. They are defined as follows: Ø Events are defined as XML file and imported as part of MDS database in order to make notification event available for use. Ø Notification templates are created using OIM advance administration console. The template contains the text and the substitution 'variables' which will be replaced with the data provided by the template resolver. Templates support internationalization and can be defined as HTML or in form of simple text. Ø Template resolver is a Java class that is responsible to provide attributes and data to be used at runtime and design time. It must be deployed following the OIM plug-in framework. Resolver data provided at design time is to be used by end user to design notification template with available entity variables and it also provides data at runtime to replace the designed variable with value to be displayed to recipients. Steps to define custom notifications in OIM 11g are: Steps# Steps 1. Define the Notification Event 2. Create the Custom Template Resolver class 3. Create Template with notification contents to be sent to recipients 4. Create Event triggering spots in OIM 1. Notification Event metadata The Notification Event is defined as XML file which need to be imported into MDS database. An event file must be compliant with the schema defined by the notification engine, which is NotificationEvent.xsd. The event file contains basic information about the event.XSD location in MDS database: “/metadata/iam-features-notification/NotificationEvent.xsd”Schema file can be viewed by exporting file from MDS using weblogicExportMetadata.sh script.Sample Notification event metadata definition: 1: <?xml version="1.0" encoding="UTF-8"?> 2: <Events xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance xsi:noNamespaceSchemaLocation="../../../metadata/NotificationEvent.xsd"> 3: <EventType name="Sample Notification"> 4: <StaticData> 5: <Attribute DataType="X2-Entity" EntityName="User" Name="Granted User"/> 6: </StaticData> 7: <Resolver class="com.iam.oim.demo.notification.DemoNotificationResolver"> 8: <Param DataType="91-Entity" EntityName="Resource" Name="ResourceInfo"/> 9: </Resolver> 10: </EventType> 11: </Events> Line# Description 1. XML file notation tag 2. Events is root tag 3. EventType tag is to declare a unique event name which will be available for template designing 4. The StaticData element lists a set of parameters which allow user to add parameters that are not data dependent. In other words, this element defines the static data to be displayed when notification is to be configured. An example of static data is the User entity, which is not dependent on any other data and has the same set of attributes for all event instances and notification templates. Available attributes are used to be defined as substitution tokens in the template. 5. Attribute tag is child tag for StaticData to declare the entity and its data type with unique reference name. User entity is most commonly used Entity as StaticData. 6. StaticData closing tag 7. Resolver tag defines the resolver class. The Resolver class must be defined for each notification. It defines what parameters are available in the notification creation screen and how those parameters are replaced when the notification is to be sent. Resolver class resolves the data dynamically at run time and displays the attributes in the UI. 8. The Param DataType element lists a set of parameters which allow user to add parameters that are data dependent. An example of the data dependent or a dynamic entity is a resource object which user can select at run time. A notification template is to be configured for the resource object. Corresponding to the resource object field, a lookup is displayed on the UI. When a user selects the event the call goes to the Resolver class provided to fetch the fields that are displayed in the Available Data list, from which user can select the attribute to be used on the template. Param tag is child tag to declare the entity and its data type with unique reference name. 9. Resolver closing tag 10 EventType closing tag 11. Events closing tag Note: - DataType needs to be declared as “X2-Entity” for User entity and “91-Entity” for Resource or Organization entities. The dynamic entities supported for lookup are user, resource, and organization. Once notification event metadata is defined, need to be imported into MDS database. Fully qualified resolver class name need to be define for XML but do not need to load the class in OIM yet (it can be loaded later). 2. Coding the notification resolver All event owners have to provide a resolver class which would resolve the data dynamically at run time. Custom resolver class must implement the interface oracle.iam.notification.impl.NotificationEventResolver and override the implemented methods with actual implementation. It has 2 methods: S# Methods Descriptions 1. public List<NotificationAttribute> getAvailableData(String eventType, Map<String, Object> params); This API will return the list of available data variables. These variables will be available on the UI while creating/modifying the Templates and would let user select the variables so that they can be embedded as a token as part of the Messages on the template. These tokens are replaced by the value passed by the resolver class at run time. Available data is displayed in a list. The parameter "eventType" specifies the event Name for which template is to be read.The parameter "params" is the map which has the entity name and the corresponding value for which available data is to be fetched. Sample code snippet: List<NotificationAttribute> list = new ArrayList<NotificationAttribute>(); long objKey = (Long) params.get("resource"); //Form Field details based on Resource object key HashMap<String, Object> formFieldDetail = getObjectFormName(objKey); for (Iterator<?> itrd = formFieldDetail.entrySet().iterator(); itrd.hasNext(); ) { NotificationAttribute availableData = new NotificationAttribute(); Map.Entry formDetailEntrySet = (Entry<?, ?>)itrd.next(); String fieldLabel = (String)formDetailEntrySet.getValue(); availableData.setName(fieldLabel); list.add(availableData); } return list; 2. Public HashMap<String, Object> getReplacedData(String eventType, Map<String, Object> params); This API would return the resolved value of the variables present on the template at the runtime when notification is being sent. The parameter "eventType" specifies the event Name for which template is to be read.The parameter "params" is the map which has the base values such as usr_key, obj_key etc required by the resolver implementation to resolve the rest of the variables in the template. Sample code snippet: HashMap<String, Object> resolvedData = new HashMap<String, Object>();String firstName = getUserFirstname(params.get("usr_key"));resolvedData.put("fname", firstName); String lastName = getUserLastName(params.get("usr_key"));resolvedData.put("lname", lastname);resolvedData.put("count", "1 million");return resolvedData; This code must be deployed as per OIM 11g plug-in framework. The XML file defining the plug-in is as below: <?xml version="1.0" encoding="UTF-8"?> <oimplugins xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <plugins pluginpoint="oracle.iam.notification.impl.NotificationEventResolver"> <plugin pluginclass= " com.iam.oim.demo.notification.DemoNotificationResolver" version="1.0" name="Sample Notification Resolver"/> </plugins> </oimplugins> 3. Defining the template To create a notification template: Log in to the Oracle Identity Administration Click the System Management tab and then click the Notification tab From the Actions list on the left pane, select Create On the Create page, enter values for the following fields under the Template Information section: Template Name: Demo template Description Text: Demo template Under the Event Details section, perform the following: From the Available Event list, select the event for which the notification template is to be created from a list of available events. Depending on your selection, other fields are displayed in the Event Details section. Note that the template Sample Notification Event created in the previous step being used as the notification event. The contents of the Available Data drop down are based on the event XML StaticData tag, the drop down basically lists all the attributes of the entities defined in that tag. Once you select an element in the drop down, it will show up in the Selected Data text field and then you can just copy it and paste it into either the message subject or the message body fields prefixing $ symbol. Example if list has attribute like First_Name then message body will contains this as $First_Name which resolver will parse and replace it with actual value at runtime. In the Resource field, select a resource from the lookup. This is the dynamic data defined by the Param DataType element in the XML definition. Based on selected resource getAvailableData method of resolver will be called to fetch the resource object attribute detail, if method is overridden with required implementation. For current scenario, Map<String, Object> params will get populated with object key as value and key as “resource” in the map. This is the only input will be provided to resolver at design time. You need to implement the further logic to fetch the object attributes detail to populate the available Data list. List string should not have space in between, if object attributes has space for attribute name then implement logic to replace the space with ‘_’ before populating the list. Example if attribute name is “First Name” then make it “First_Name” and populate the list. Space is not supported while you try to parse and replace the token at run time with real value. Make a note that the Available Data and Selected Data are used in the substitution tokens definition only, they do not define the final data that will be sent in the notification. OIM will invoke the resolver class to get the data and make the substitutions. Under the Locale Information section, enter values in the following fields: To specify a form of encoding, select either UTF-8 or ASCII. In the Message Subject field, enter a subject for the notification. From the Type options, select the data type in which you want to send the message. You can choose between HTML and Text/Plain. In the Short Message field, enter a gist of the message in very few words. In the Long Message field, enter the message that will be sent as the notification with Available data token which need to be replaced by resolver at runtime. After you have entered the required values in all the fields, click Save. A message is displayed confirming the creation of the notification template. Click OK 4. Triggering the event A notification event can be triggered from different places in OIM. The logic behind the triggering must be coded and plugged into OIM. Examples of triggering points for notifications: Event handlers: post process notifications for specific data updates in OIM users Process tasks: to notify the users that a provisioning task was executed by OIM Scheduled tasks: to notify something related to the task The scheduled job has two parameters: Template Name: defines the notification template to be sent User Login: defines the user record that will provide the data to be sent in the notification Sample Code Snippet: public void execute(String templateName , String userId) { try { NotificationService notService = Platform.getService(NotificationService.class); NotificationEvent eventToSend=this.createNotificationEvent(templateName,userId); notService.notify(eventToSend); } catch (Exception e) { e.printStackTrace(); } } private NotificationEvent createNotificationEvent(String poTemplateName, String poUserId) { NotificationEvent event = new NotificationEvent(); String[] receiverUserIds= { poUserId }; event.setUserIds(receiverUserIds); event.setTemplateName(poTemplateName); event.setSender(null); HashMap<String, Object> templateParams = new HashMap<String, Object>(); templateParams.put("USER_LOGIN",poUserId); event.setParams(templateParams); return event; } public HashMap getAttributes() { return null; } public void setAttributes() {} }

  Read the article

• Coherence - How to develop a custom push replication publisher

  - by cosmin.tudor(at)oracle.com

  CoherencePushReplicationDB.zipIn the example bellow I'm describing a way of developing a custom push replication publisher that publishes data to a database via JDBC. This example can be easily changed to publish data to other receivers (JMS,...) by performing changes to step 2 and small changes to step 3, steps that are presented bellow. I've used Eclipse as the development tool. To develop a custom push replication publishers we will need to go through 6 steps: Step 1: Create a custom publisher scheme class Step 2: Create a custom publisher class that should define what the publisher is doing. Step 3: Create a class data is performing the actions (publish to JMS, DB, etc ) for the custom publisher. Step 4: Register the new publisher against a ContentHandler. Step 5: Add the new custom publisher in the cache configuration file. Step 6: Add the custom publisher scheme class to the POF configuration file. All these steps are detailed bellow. The coherence project is attached and conclusions are presented at the end. Step 1: In the Coherence Eclipse project create a class called CustomPublisherScheme that should implement com.oracle.coherence.patterns.pushreplication.publishers.AbstractPublisherScheme. In this class define the elements of the custom-publisher-scheme element. For instance for a CustomPublisherScheme that looks like that: <sync:publisher> <sync:publisher-name>Active2-JDBC-Publisher</sync:publisher-name> <sync:publisher-scheme> <sync:custom-publisher-scheme> <sync:jdbc-string>jdbc:oracle:thin:@machine-name:1521:XE</sync:jdbc-string> <sync:username>hr</sync:username> <sync:password>hr</sync:password> </sync:custom-publisher-scheme> </sync:publisher-scheme> </sync:publisher> the code is: package com.oracle.coherence; import java.io.DataInput; import java.io.DataOutput; import java.io.IOException; import com.oracle.coherence.patterns.pushreplication.Publisher; import com.oracle.coherence.configuration.Configurable; import com.oracle.coherence.configuration.Mandatory; import com.oracle.coherence.configuration.Property; import com.oracle.coherence.configuration.parameters.ParameterScope; import com.oracle.coherence.environment.Environment; import com.tangosol.io.pof.PofReader; import com.tangosol.io.pof.PofWriter; import com.tangosol.util.ExternalizableHelper; @Configurable public class CustomPublisherScheme extends com.oracle.coherence.patterns.pushreplication.publishers.AbstractPublisherScheme { /** * */ private static final long serialVersionUID = 1L; private String jdbcString; private String username; private String password; public String getJdbcString() { return this.jdbcString; } @Property("jdbc-string") @Mandatory public void setJdbcString(String jdbcString) { this.jdbcString = jdbcString; } public String getUsername() { return username; } @Property("username") @Mandatory public void setUsername(String username) { this.username = username; } public String getPassword() { return password; } @Property("password") @Mandatory public void setPassword(String password) { this.password = password; } public Publisher realize(Environment environment, ClassLoader classLoader, ParameterScope parameterScope) { return new CustomPublisher(getJdbcString(), getUsername(), getPassword()); } public void readExternal(DataInput in) throws IOException { super.readExternal(in); this.jdbcString = ExternalizableHelper.readSafeUTF(in); this.username = ExternalizableHelper.readSafeUTF(in); this.password = ExternalizableHelper.readSafeUTF(in); } public void writeExternal(DataOutput out) throws IOException { super.writeExternal(out); ExternalizableHelper.writeSafeUTF(out, this.jdbcString); ExternalizableHelper.writeSafeUTF(out, this.username); ExternalizableHelper.writeSafeUTF(out, this.password); } public void readExternal(PofReader reader) throws IOException { super.readExternal(reader); this.jdbcString = reader.readString(100); this.username = reader.readString(101); this.password = reader.readString(102); } public void writeExternal(PofWriter writer) throws IOException { super.writeExternal(writer); writer.writeString(100, this.jdbcString); writer.writeString(101, this.username); writer.writeString(102, this.password); } } Step 2: Define what the CustomPublisher should basically do by creating a new java class called CustomPublisher that implements com.oracle.coherence.patterns.pushreplication.Publisher package com.oracle.coherence; import com.oracle.coherence.patterns.pushreplication.EntryOperation; import com.oracle.coherence.patterns.pushreplication.Publisher; import com.oracle.coherence.patterns.pushreplication.exceptions.PublisherNotReadyException; import java.io.BufferedWriter; import java.util.Iterator; public class CustomPublisher implements Publisher { private String jdbcString; private String username; private String password; private transient BufferedWriter bufferedWriter; public CustomPublisher() { } public CustomPublisher(String jdbcString, String username, String password) { this.jdbcString = jdbcString; this.username = username; this.password = password; this.bufferedWriter = null; } public String getJdbcString() { return this.jdbcString; } public String getUsername() { return username; } public String getPassword() { return password; } public void publishBatch(String cacheName, String publisherName, Iterator<EntryOperation> entryOperations) { DatabasePersistence databasePersistence = new DatabasePersistence( jdbcString, username, password); while (entryOperations.hasNext()) { EntryOperation entryOperation = (EntryOperation) entryOperations .next(); databasePersistence.databasePersist(entryOperation); } } public void start(String cacheName, String publisherName) throws PublisherNotReadyException { System.err .printf("Started: Custom JDBC Publisher for Cache %s with Publisher %s\n", new Object[] { cacheName, publisherName }); } public void stop(String cacheName, String publisherName) { System.err .printf("Stopped: Custom JDBC Publisher for Cache %s with Publisher %s\n", new Object[] { cacheName, publisherName }); } } In the publishBatch method from above we inform the publisher that he is supposed to persist data to a database: DatabasePersistence databasePersistence = new DatabasePersistence( jdbcString, username, password); while (entryOperations.hasNext()) { EntryOperation entryOperation = (EntryOperation) entryOperations .next(); databasePersistence.databasePersist(entryOperation); } Step 3: The class that deals with the persistence is a very basic one that uses JDBC to perform inserts/updates against a database. package com.oracle.coherence; import com.oracle.coherence.patterns.pushreplication.EntryOperation; import java.sql.*; import java.text.SimpleDateFormat; import com.oracle.coherence.Order; public class DatabasePersistence { public static String INSERT_OPERATION = "INSERT"; public static String UPDATE_OPERATION = "UPDATE"; public Connection dbConnection; public DatabasePersistence(String jdbcString, String username, String password) { this.dbConnection = createConnection(jdbcString, username, password); } public Connection createConnection(String jdbcString, String username, String password) { Connection connection = null; System.err.println("Connecting to: " + jdbcString + " Username: " + username + " Password: " + password); try { // Load the JDBC driver String driverName = "oracle.jdbc.driver.OracleDriver"; Class.forName(driverName); // Create a connection to the database connection = DriverManager.getConnection(jdbcString, username, password); System.err.println("Connected to:" + jdbcString + " Username: " + username + " Password: " + password); } catch (ClassNotFoundException e) { e.printStackTrace(); } // driver catch (SQLException e) { e.printStackTrace(); } return connection; } public void databasePersist(EntryOperation entryOperation) { if (entryOperation.getOperation().toString() .equalsIgnoreCase(INSERT_OPERATION)) { insert(((Order) entryOperation.getPublishableEntry().getValue())); } else if (entryOperation.getOperation().toString() .equalsIgnoreCase(UPDATE_OPERATION)) { update(((Order) entryOperation.getPublishableEntry().getValue())); } } public void update(Order order) { String update = "UPDATE Orders set QUANTITY= '" + order.getQuantity() + "', AMOUNT='" + order.getAmount() + "', ORD_DATE= '" + (new SimpleDateFormat("dd-MMM-yyyy")).format(order .getOrdDate()) + "' WHERE SYMBOL='" + order.getSymbol() + "'"; System.err.println("UPDATE = " + update); try { Statement stmt = getDbConnection().createStatement(); stmt.execute(update); stmt.close(); } catch (SQLException ex) { System.err.println("SQLException: " + ex.getMessage()); } } public void insert(Order order) { String insert = "insert into Orders values('" + order.getSymbol() + "'," + order.getQuantity() + "," + order.getAmount() + ",'" + (new SimpleDateFormat("dd-MMM-yyyy")).format(order .getOrdDate()) + "')"; System.err.println("INSERT = " + insert); try { Statement stmt = getDbConnection().createStatement(); stmt.execute(insert); stmt.close(); } catch (SQLException ex) { System.err.println("SQLException: " + ex.getMessage()); } } public Connection getDbConnection() { return dbConnection; } public void setDbConnection(Connection dbConnection) { this.dbConnection = dbConnection; } } Step 4: Now we need to register our publisher against a ContentHandler. In order to achieve that we need to create in our eclipse project a new class called CustomPushReplicationNamespaceContentHandler that should extend the com.oracle.coherence.patterns.pushreplication.configuration.PushReplicationNamespaceContentHandler. In the constructor of the new class we define a new handler for our custom publisher. package com.oracle.coherence; import com.oracle.coherence.configuration.Configurator; import com.oracle.coherence.environment.extensible.ConfigurationContext; import com.oracle.coherence.environment.extensible.ConfigurationException; import com.oracle.coherence.environment.extensible.ElementContentHandler; import com.oracle.coherence.patterns.pushreplication.PublisherScheme; import com.oracle.coherence.environment.extensible.QualifiedName; import com.oracle.coherence.patterns.pushreplication.configuration.PushReplicationNamespaceContentHandler; import com.tangosol.run.xml.XmlElement; public class CustomPushReplicationNamespaceContentHandler extends PushReplicationNamespaceContentHandler { public CustomPushReplicationNamespaceContentHandler() { super(); registerContentHandler("custom-publisher-scheme", new ElementContentHandler() { public Object onElement(ConfigurationContext context, QualifiedName qualifiedName, XmlElement xmlElement) throws ConfigurationException { PublisherScheme publisherScheme = new CustomPublisherScheme(); Configurator.configure(publisherScheme, context, qualifiedName, xmlElement); return publisherScheme; } }); } } Step 5: Now we should define our CustomPublisher in the cache configuration file according to the following documentation. <cache-config xmlns:sync="class:com.oracle.coherence.CustomPushReplicationNamespaceContentHandler" xmlns:cr="class:com.oracle.coherence.environment.extensible.namespaces.InstanceNamespaceContentHandler"> <caching-schemes> <sync:provider pof-enabled="false"> <sync:coherence-provider /> </sync:provider> <caching-scheme-mapping> <cache-mapping> <cache-name>publishing-cache</cache-name> <scheme-name>distributed-scheme-with-publishing-cachestore</scheme-name> <autostart>true</autostart> <sync:publisher> <sync:publisher-name>Active2 Publisher</sync:publisher-name> <sync:publisher-scheme> <sync:remote-cluster-publisher-scheme> <sync:remote-invocation-service-name>remote-site1</sync:remote-invocation-service-name> <sync:remote-publisher-scheme> <sync:local-cache-publisher-scheme> <sync:target-cache-name>publishing-cache</sync:target-cache-name> </sync:local-cache-publisher-scheme> </sync:remote-publisher-scheme> <sync:autostart>true</sync:autostart> </sync:remote-cluster-publisher-scheme> </sync:publisher-scheme> </sync:publisher> <sync:publisher> <sync:publisher-name>Active2-Output-Publisher</sync:publisher-name> <sync:publisher-scheme> <sync:stderr-publisher-scheme> <sync:autostart>true</sync:autostart> <sync:publish-original-value>true</sync:publish-original-value> </sync:stderr-publisher-scheme> </sync:publisher-scheme> </sync:publisher> <sync:publisher> <sync:publisher-name>Active2-JDBC-Publisher</sync:publisher-name> <sync:publisher-scheme> <sync:custom-publisher-scheme> <sync:jdbc-string>jdbc:oracle:thin:@machine_name:1521:XE</sync:jdbc-string> <sync:username>hr</sync:username> <sync:password>hr</sync:password> </sync:custom-publisher-scheme> </sync:publisher-scheme> </sync:publisher> </cache-mapping> </caching-scheme-mapping> <!-- The following scheme is required for each remote-site when using a RemoteInvocationPublisher --> <remote-invocation-scheme> <service-name>remote-site1</service-name> <initiator-config> <tcp-initiator> <remote-addresses> <socket-address> <address>localhost</address> <port>20001</port> </socket-address> </remote-addresses> <connect-timeout>2s</connect-timeout> </tcp-initiator> <outgoing-message-handler> <request-timeout>5s</request-timeout> </outgoing-message-handler> </initiator-config> </remote-invocation-scheme> <!-- END: com.oracle.coherence.patterns.pushreplication --> <proxy-scheme> <service-name>ExtendTcpProxyService</service-name> <acceptor-config> <tcp-acceptor> <local-address> <address>localhost</address> <port>20002</port> </local-address> </tcp-acceptor> </acceptor-config> <autostart>true</autostart> </proxy-scheme> </caching-schemes> </cache-config> As you can see in the red-marked text from above I've:       - set new Namespace Content Handler       - define the new custom publisher that should work together with other publishers like: stderr and remote publishers in our case. Step 6: Add the com.oracle.coherence.CustomPublisherScheme to your custom-pof-config file: <pof-config> <user-type-list> <!-- Built in types --> <include>coherence-pof-config.xml</include> <include>coherence-common-pof-config.xml</include> <include>coherence-messagingpattern-pof-config.xml</include> <include>coherence-pushreplicationpattern-pof-config.xml</include> <!-- Application types --> <user-type> <type-id>1901</type-id> <class-name>com.oracle.coherence.Order</class-name> <serializer> <class-name>com.oracle.coherence.OrderSerializer</class-name> </serializer> </user-type> <user-type> <type-id>1902</type-id> <class-name>com.oracle.coherence.CustomPublisherScheme</class-name> </user-type> </user-type-list> </pof-config> CONCLUSIONSThis approach allows for publishers to publish data to almost any other receiver (database, JMS, MQ, ...). The only thing that needs to be changed is the DatabasePersistence.java class that should be adapted to the chosen receiver. Only minor changes are needed for the rest of the code (to publishBatch method from CustomPublisher class).

  Read the article

• Search algorithm (with a sort algorithm already implemented)

  - by msr

  Hello, Im doing a Java application and Im facing some doubts in which concerns performance. I have a PriorityQueue which guarantees me the element removed is the one with greater priority. That PriorityQueue has instances of class Event (which implements Comparable interface). Each Event is associated with a Entity. The size of that priorityqueue could be huge and very frequently I will have to remove events associated to an entity. Right now Im using an iterator to run all the priorityqueue. However Im finding it heavy and I wonder if there are better alternatives to search and remove events associated with an entity "xpto". Any suggestions? Thanks!

  Read the article

• Iteration through std containers in openmp

  - by Sasun Hambardzumyan

  Hi, people. I try to use openmp for multithreading the loop through std::set. When I write the following code - #pragma omp parallel for for (std::set<A>::const_iterator i = s.begin(); i != s.end(); ++i) { const A a = *i; operate(a); } I get an error - error: invalid type for iteration variable 'i' error: invalid controlling predicate error: invalid increment expression. So is there an another way to correct iteration in std containers using openmp? There is a workaround to use int i and iterate from 0 to s.size() and using iterator inside a loop body, but this is not looks good.

  Read the article

• Coroutines in C#

  - by eyal

  I am looking to implement co-routines (user schedualed threads) in c#. When using c++ I was previously using fibers. As I see on the internet fibers do not exist in C#. I would like to get simillar functionality. Is there any "right" way to implement coroutines in c#? I have thought of implementing this using threads that aqcuire a single exection mutex + 1 one schedualer thread which releases this mutex for each coroutine. But this seems very costly (it forces a context switch between each coroutine) I have also seen the yeild iterator functionality, but as I understand you can't yeild within an internal function (only in the original ienumerator function). So this does me little good.

  Read the article

• Python + MySQLdb executemany

  - by lhahne

  I'm using Python and its MySQLdb module to import some measurement data into a Mysql database. The amount of data that we have is quite high (currently about ~250 MB of csv files and plenty of more to come). Currently I use cursor.execute(...) to import some metadata. This isn't problematic as there are only a few entries for these. The problem is that when I try to use cursor.executemany() to import larger quantities of the actual measurement data, MySQLdb raises a TypeError: not all arguments converted during string formatting My current code is def __insert_values(self, values): cursor = self.connection.cursor() cursor.executemany(""" insert into values (ensg, value, sampleid) values (%s, %s, %s)""", values) cursor.close() where values is a list of tuples containing three strings each. Any ideas what could be wrong with this? Edit: The values are generated by yield (prefix + row['id'], row['value'], sample_id) and then read into a list one thousand at a time where row is and iterator coming from csv.DictReader.

  Read the article

• Add functions in gdb at runtime

  - by Michael Anderson

  I'm trying to debug some STL based C++ code in gdb. The code has something like int myfunc() { std::map<int,int> m; ... } Now in gdb, inside myfunc using "print m" gives something very ugly. What I've seen recommended is compiling something like void printmap( std::map<int,int> m ) { for( std::map<int,int>::iterator it = ... ) { printf("%d : %d", it->first, it->second ); } } Then in gdb doing (gdb) call printmap( m ) This seems like a good way to handle the issue... but can I put printmap into a seperate object file (or even dynamic library) that I then load into gdb at runtime rather than compiling it into my binary - as recompiling the binary every time I want to look at another STL variable is not fun .. while compiling and loading a single .o file for the print routine may be acceptable.

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >