Search Results

Search found 29396 results on 1176 pages for 'multiple graphics devices'.

Page 30/1176 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

  • Ubuntu 12.10 no network and no graphics

    - by khasiKoMasu
    I recently upgraded Ubuntu 12.04 to 12.10 only to find out that it won't connect to any network, neither wired nor wireless and the graphics is messed up too as in a low screen resolution. For 12.04, my system was running perfectly. I don't know why upgrade messed it up so bad. Reinstalling the OS is an issue because I have set up a lot of development environments that I cannot afford to set it up again. Some of the outputs: lspci -nn | grep 0200 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) nm-tool NetworkManager Tool State: disconnected cat /etc/network/interfaces auto lo iface lo inet loopback sudo cat /var/log/syslog | grep etwork | tail -n20 Nov 2 13:50:22 Cobalt NetworkManager[978]: SCPlugin-Ifupdown: (-1240454760) ... get_connections (managed=false): return empty list. Nov 2 13:50:22 Cobalt NetworkManager[978]: Ifupdown: get unmanaged devices count: 0 Nov 2 13:50:22 Cobalt bluetoothd[1016]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> modem-manager is now available Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> monitoring kernel firmware directory '/lib/firmware'. Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WiFi enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WWAN enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> WiMAX enabled by radio killswitch; enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <info> Networking is enabled by state file Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> /sys/devices/virtual/net/lo: couldn't determine device driver; ignoring... Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt kernel: [ 28.688167] type=1400 audit(1351882222.452:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1046 comm="apparmor_parser" Nov 2 13:50:22 Cobalt bluetoothd[1062]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt bluetoothd[1118]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) Nov 2 13:50:22 Cobalt bluetoothd[1237]: Failed to init network plugin Nov 2 13:50:22 Cobalt NetworkManager[978]: <warn> bluez error getting default adapter: Message did not receive a reply (timeout by message bus) ps aux | grep -i network root 978 0.0 0.1 23732 4808 ? Ssl 13:50 0:00 NetworkManager sudo modprobe -r forcedeth FATAL: Module forcedeth not found

    Read the article

  • How to limit / throttle bandwidth with *multiple* connections

    - by Led
    I'm writing an app in C# that downloads concurrently (in different threads) using multiple connections to multiple servers, and I'd like to be able to limit the used bandwidth. For a single connection the solution would be simple; I'd use the solution posted here : http://www.codeproject.com/KB/IP/Bandwidth_throttling.aspx which calculates a sleep-time for the single connection. I'd like to know what the best way is to do this for multiple connections. Using the ThrottledStream posted above and dividing the bandwidth (say 2MB/sec) evenly among the connections isn't right, if I'd have 3 very slow connections and 1 very fast one they'd all be capped to 512kb/sec, so the fast one won't go above 512kb/sec and the other 3 wouldn't even make that. The preferred solution I think is to cap only the fastest connection(s) so the slower connections are used optimally. Does anyone have any experience with this, example code or any advice ?

    Read the article

  • Storing multiple checkbox values in database

    - by Madjokr
    Hi, I want to store multiple column values in table.Lets take a example .. What are your favourite colors? the choices can be red,blue,green, orange. So lets assume, the user selects atleast 2 values. Is there any way to store the multiple values in table. I have implemented by concatinating choices of users in a column in the table. I later found that it is a bad practise. Currently i can think of using Bitwise operator and habtm. What are the different ways for storing multiple choices values in table? If I am implementing in rails, What is the best way to implement this with OOP concepts? Is there any builtin options in rails?

    Read the article

  • mysql LAST_INSERT_ID() used with multiple records INSERT statement

    - by bogdan
    Hello, If i insert multiple records with a loop that executes a single record insert, the last insert id returned is, as expected, the last one... but if i do a multiple records insert statement: INSERT INTO people (name,age) VALUES('William',25),('Bart',15),('Mary',12); let's say the three above are the first records inserted in the table...after the insert statement i expected last insert id to return 3, but it returned 1...the first insert id for the statement in question... So can someone please confirm if this is the normal behavior of LAST_INSERT_ID() in the context of multiple records INSERT statements...so i can base my code on it thanks :)

    Read the article

  • Alternatives to multiple inheritance for my architecture (NPCs in a Realtime Strategy game)?

    - by Brettetete
    Coding isn't that hard actually. The hard part is to write code that makes sense, is readable and understandable. So I want to get a better developer and create some solid architecture. So I want to do create an architecture for NPCs in a video-game. It is a Realtime Strategy game like Starcraft, Age of Empires, Command & Conquers, etc etc.. So I'll have different kinds of NPCs. A NPC can have one to many abilities (methods) of these: Build(), Farm() and Attack(). Examples: Worker can Build() and Farm() Warrior can Attack() Citizen can Build(), Farm() and Attack() Fisherman can Farm() and Attack() I hope everything is clear so far. So now I do have my NPC Types and their abilities. But lets come to the technical / programmatical aspect. What would be a good programmatic architecture for my different kinds of NPCs? Okay I could have a base class. Actually I think this is a good way to stick with the DRY principle. So I can have methods like WalkTo(x,y) in my base class since every NPC will be able to move. But now lets come to the real problem. Where do I implement my abilities? (remember: Build(), Farm() and Attack()) Since the abilities will consists of the same logic it would be annoying / break DRY principle to implement them for each NPC (Worker,Warrior, ..). Okay I could implement the abilities within the base class. This would require some kind of logic that verifies if a NPC can use ability X. IsBuilder, CanBuild, .. I think it is clear what I want to express. But I don't feel very well with this idea. This sounds like a bloated base class with too much functionality. I do use C# as programming language. So multiple inheritance isn't an opinion here. Means: Having extra base classes like Fisherman : Farmer, Attacker won't work.

    Read the article

  • Letter to Ballmer: Making Better Consumer Devices

    - by andrewbrust
    Last year, I wrote Steve Ballmer an email, and he was kind enough to write me back.  The email contained a scan of a column I wrote praising Microsoft’s BI strategy.  His reply contained three simple words: “Super nice  thanks.” Well, now I’d like to write to Steve again, in an open letter format, and this time the love may be a bit tougher.  But I’m still super earnest. The past two days have been eventful ones for Microsoft: The company announced the departure of company veterans Robbie Bach and J Allard and the market announced Apple is now besting Microsoft in market capitalization. Plus, announcements were made that make it plain that Ballmer will, in effect, be running Microsoft’s Entertainment & Devices division himself. With that in mind, I’d like to offer my list of a dozen things I think Microsoft’s CEO should do to improve that division’s offerings and, hopefully, its bottom line. So here goes:   1. On Windows Phone 7, Stay the Course The press is teeming with headlines and reader comments proclaiming the death-before-arrival of Windows Phone 7.  That’s plain silly.  You’ve got the makings of a great and unique SmartPhone platform, and you’re the only company (even considering RIM) that can offer full fidelity Exchange integration, not to mention implementing Office on the device.  Let the existing team finish this puppy and ship it. And then have them pump out a few updates, over-the-air, quickly.  Show them that Google Android’s not the only product that can do good, rapid dot releases. And another thing: make sure your OEMs’ devices have flawless touch screens.  If they don’t, then you shouldn’t certify them for delivery to customers.  Period. Oh, and kill the Kin, quietly.  It was DOA, and you know it.   2. Move Media Center to the Xbox Platform Media Center is, at its core, a good product.  But delivering a media distribution and DVR platform on a sophisticated PC operating system like Windows 7 just creates too many moving parts.  Xbox already functions as the best Media Center extender device – it should actually be the hub as well. Media Center is mostly based on .NET code – and XNA is a .NET environment for Xbox – find a way to bridge that small gap and make Media Center a joy to work with instead of a frustration.  Beating Apple TV out of this sub-market is the lowest hanging fruit on the tree (goofy pun, but it’s true).   3. Integrate Media Center with Mediaroom, or Kill the Latter You have two media products with almost identical names.  One is for standalone DVRs and the other is for IPTV cable set tops with DVR capabilities.  Can we merge these please?  My previous request of putting Media Center on Xbox would seem to tie into this nicely, since you’ve announced plans to do that with Mediaroom already.   4. Fix the Red Ring of Death People love the Xbox, but they really don’t love sending their consoles back every 18-24 months, when they get a bunch of red lights flashing on power up.  You’ve handled this defect about as gracefully as possible, but it’s been around for a long time now and it doesn’t seem to be fixed yet.  You can do better.  In fact, you must do better, or you insult your customers.   5. Add Blu Ray to Xbox I know, streaming movies are the future; physical media is legacy technology.  So if that’s true, why did you back HD DVD so hard?  You know why: for now, the film studios won’t allow a large selection of new release, HD, surround sound content be distributed on any medium other than Blu Ray or cable pay per view/on-demand.  Don’t you want home theater buffs to see the Xbox as a fantastic device for their rigs?  Don’t you want to put PlayStation 3 out of its misery?  And if you follow my suggestions above (move Media Center to the Xbox and fix the Red Ring problem), you’d have it all sewn up.  Do I think Blu Ray functionality will move a lot of units?  No.  Do I think that it would move more units with desperately needed influential home theater consumers?  You bet.  And you might sell more ZunePass subscriptions in the process. But while you’re at it, make the fan quieter, please.   6. Make More of Windows Home Server Home Server is a fantastic product.  And for reasons unknown to me, it seems like you’re letting it languish.  Development of the add-in ecosystem seems underfunded.  WHS’ unparalleled ease of use and reliability for home PC backup (and emergency restores) goes unsung.  Product cycles are slow.  Support for your OEMs, who are doing great work, especially in the green space with Atom CPUs, seems lacking.  You’ve married a trophy girl and you keep her cloistered at home!  That’s cruel, unusual and, um, incredibly ill-advised.  Make use of this ace card, and while you’re at it, give it real integration with Media Center.  The integration thus far proof-of-concept quality.  You should go way past that – both products will benefit immeasurably.   7. Set Up a Partner Platform for Custom Installers There’s a whole sub-industry of companies that install, integrate and configure home theater, security and connected home products.  They have an industry group. They are influential in the high-end of the consumer electronics industry, and so are their customers.  They love Media Center and they love Windows Home Server.  But I have talked to several of them at the Consumer Electronics Show and they tell me you don’t love them.  They find it very difficult to do business with Microsoft, even though they want nothing more than to sell and evangelize your platform.  This is a travesty.  Please fix it.  Get Allison Watson and the Microsoft Partner Network on board and have her hire someone who knows how to run a channel program for consumer electronics companies.  Problem solved.  Markets expanded.   8. Make Your Own Hardware In other areas, I know you love your partners.  I help run one, so I appreciate that.  But when it came to Xbox and Zune you built them it yourself (albeit on a contract basis, which is fine).  Windows Phone 7 has a chance to work as an OEM play, but it would work better if you produced the devices.  At least consider building a reference device that sells alongside your OEMs’ offerings.  That’s what Google did with the Nexxus One.  And while that phone was not itself a big seller, it catalyzed two wonderful things : (1) a quality bar was set and (2) partners exceeded it.  Before the Nexxus One, the best Android handset out there was the Motorola Droid. The Nexxus One was better, and the HTC Droid Incredible and Evo 4G are now even better than Google’s phone, which is why Verizon and Sprint decided not to carry it.  Imagine if all Windows Phone 6.x devices were on par with the HTC HD2.  I tend to believe you’d have a lot bigger market share than you do now.   9. Continue with Your Retail Initiative From what I hear, it sounds like it’s going well.  And this goes right along with making your own hardware.  When you build it, they will come.  And then it makes the likes of Best Buy and Staples do better.   10. Make an Acquisition (or Two) TiVo and/or Moxi look ripe for the picking.  With their ability to build stuff people love and your ability to run a business, you might just have something.  But do a better job than you did when you bought Danger.  Buy the ideas, not just the customers, eh?   11. Make Beautiful Stuff You’ve heard this one before, I know.  But I have some head-shrinking advice on this one.  You know that Apple obsesses over its industrial design.  You know that appeals to consumers.  But it seems you think doing so is Apple’s game exclusively and so you shouldn’t even try.  Bull dinky.  Come to New York and visit the Museum of Modern Art’s Architecture and Design gallery.  You’ll see that lots of companies and product categories have had very high design value well before Apple existed.  You can do this, and the Zune HD was a great start.  Now run with that.  Find those negative voices in your head that are telling you that you can’t and shut them up.  For good.   12. Burst the Bubble Some of the products you’ve built seem like they were conceived in a bizarro world.  That would appear to be the result of groupthink.  You must do better.  And there’s lots of people willing to advise you.  This includes just about everyone in the Regional Director program, and probably a bunch of MVPs.  Heck, I bet the guys at Engadget could help out too.  Imagine if you let them see the Kin before it shipped.  Talk to high-end gear consumers.  Talk to Best Buy and CostCo customers too.   Signing Off I hope this was of value to you.  As I wrote this I kept telling myself how obvious, even trite, some of these pieces of advice were and then, because of that, doubting they’d really help.  But I decided that they must not be obvious to Microsoft.  Sometimes when you get wrapped up in stuff, it’s hard to clear your head.  I think my head’s pretty clear here though (I’m wrapped up in other stuff), so maybe my perspective can help.  If not, well, then, I guess they all can’t be super nice.

    Read the article

  • Unity stuck in 2D mode, Nvidia Quadro graphics "unknown", Nvidia-Current active but not in use

    - by Jordan Lund
    I've seen this problem reported under several questions, but I haven't been able to resolve any of it so I thought I'd bring it all in under one umbrella. I started a new job and was given a Dell Precision M6400 laptop with Nvidia Quadro FX 2700M graphics card. It had a previous version of Ubuntu on it, but nobody had any passwords for it so I wiped the drive and did a fresh install of 11.10 from scratch. I didn't do any updates during installation, preferring to do them after boot. Updates ran fine and the system works... except Unity is in 2D mode. System Settings - Additional Drivers shows that Nvidia-Current is active but not in use. System Settings - System Info shows Graphics Driver Unknown, Experience Standard Nvidia X Server Settings is installed and working, re-writing the xorg.conf did nothing. /usr/lib/nux/unity_support_test -p OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: Quadro FX 2700M/PCI/SSE2 OpenGL version string: 3.3.0 NVIDIA 285.05.09 Not software rendered: yes Not blacklisted: yes GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity 3D supported: yes One suggestion was to do a sudo apt-get --purge remove nvidia* and that resulted in a scrambled screen on boot and a non-bootable installation. Pressing the Delete key on boot allowed me to access the recovery console and do a sudo apt-get install nvidia-current, which brought me back to a working, bootable system. Another suggestion was to edit /etc/default/grub and change the line reading "GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to read "GRUB_CMDLINE_LINUX_DEFAULT="quiet splash vmalloc=192MB" thus allocating more video RAM. I did that, followed by a sudo update-grub and a re-boot. No change. Created a brand new standard user and logged on with that account, no change.

    Read the article

  • How to Find Out Which Devices Are Supported By Solaris 11

    - by rickramsey
    Image of monks gathering on the steps of the main hall in the Tashilhunpo Monastery is courtesy of Alison Whitear Travel Photography. In his update of Brian Leonard's original Taking Your First Steps With Oracle Solaris, Glynn Foster walks you through the most basic steps required to get a version of Oracle Solaris 11 operational: Installing Solaris (VirtualBox, bare metal, or multi-boot) Managing users (root role, sudo command) Managing services with SMF (svcs and svcadm) Connecting to the network (with SMF or manually via dladm and ipadm) Figuring out the directory structure Updating software (with the IPS GUI or the pkg command) Managing package repositories Creating and managing additional boot environments One of the things you'll have to consider as you install Solaris 11 on an x86 system is whether Solaris has the proper drivers for the devices on your system. In the section titled "Installing On Bare Metal as a Standalone System," Glynn shows you how to use the Device Driver utility that's included with the Graphical Installer. However, if you want to get that information before you start installing Solaris 11 on your x86 system, you can consult the x86 Device List that's part of the Oracle Solaris Hardware Compatibility List (HCL). Here's how: Open the Device List. Scroll down to the table. Open the "Select Release" pull-down menu and pick "Solaris 11 11/11." Move over to the "Select Device Type" pull-down menu, and pick the device type. Or "All." The table will list all the devices of that type that are supported by Solaris 11, including PCI ID and vendor. In the coming days the Solaris Hardware Compatibility List will be updated with more Solaris 11 content. Stay tuned. - Rick Ramsey Website Newsletter Facebook Twitter

    Read the article

  • Further question on Intel graphics driver

    - by Thomas Byers
    Ok, Josh answered almost immed.! I need to know specifically, now that I am using Nvidia card effectively, do I need to allow update manager to update the intel gr. drivers? I must add, I believe I know why Update Manager is telling me I need to update those Intel gr. drivers. It probably happened because I tried to update my nvidia drivers and got a buggy install, which let to to a black screen. I shut the system down manually after that and rebooted to a black screen and upon a further reboot I ascertained that I could still dual-boot(windows 7) into the other os. Then I went through the restart process and at the grub2 menu chose other options and it was probably, at that time, that Linux was smart enough to know that nvidia drivers as installed weren't cutting it, and reverted to the onboard Intel graphics system...does that make sense? Anyway, after successfully getting up and running, I reinstalled my old but successful nvidia drivers and all was well again, except now upon running Update Manager, I am offered the Intel graphics driver upgrade each time, which, up til now I have unchecked...my question is now more obvious. Should I accept the Intel driver update and if I do, will it once again override my nvidia drivers?

    Read the article

  • Thinkpad W510 with default graphics drivers shows weird brightness issues

    - by Chantz
    Hey guys, I am currently running 10.10 - 32 bit on a new Thinkpad W510 with nVidia Quadro FX 880M graphics card. I am running with the default graphics drivers that installed with ubuntu install. My problem is that when I am logging in the screen acts normally as far as birghtness is concerned. I can increase/decrease brightness with Fn keys. But few seconds after I log in screen goes pitch dark. Hitting Fn+Home flickers the screen to all the way bright, then all the way dark. This behavior continues until I reach maximum brightness, in which case the screen stays all the way bright, for a few more seconds and then again goes dark if there is no activity & the cycle continues. Have you guys faced any of these issues? If so any pointers on how to resolve it. I am not alone, on ubuntu forum I saw another person having the same issue - link but no solution. Please help! UPDATE I followed the instructions that htorque mentions in his answer and it worked.

    Read the article

  • Threading models when talking to hardware devices

    - by Fuzz
    When writing an interface to hardware over a communication bus, communications timing can sometimes be critical to the operation of a device. As such, it is common for developers to spin up new threads to handle communications. It can also be a terrible idea to have a whole bunch of threads in your system, an in the case that you have multiple hardware devices you may have many many threads that are out of control of the main application. Certainly it can be common to have two threads per device, one for reading and one for writing. I am trying to determine the pros and cons of the two different models I can think of, and would love the help of the Programmers community. Each device instance gets handles it's own threads (or shares a thread for a communication device). A thread may exist for writing, and one for reading. Requested writes to a device from the API are buffered and worked on by the writer thread. The read thread exists in the case of blocking communications, and uses call backs to pass read data to the application. Timing of communications can be handled by the communications thread. Devices aren't given their own threads. Instead read and write requests are queued/buffered. The application then calls a "DoWork" function on the interface and allows all read and writes to take place and fire their callbacks. Timing is handled by the application, and the driver can request to be called at a given specific frequency. Pros for Item 1 include finer grain control of timing at the communication level at the expense of having control of whats going on at the higher level application level (which for a real time system, can be terrible). Pros for Item 2 include better control over the timing of the entire system for the application, at the expense of allowing each driver to handle it's own business. If anyone has experience with these scenarios, I'd love to hear some ideas on the approaches used.

    Read the article

  • System in low graphics, deleted linux, grub rescue, can't access windows

    - by First timer
    So I'm pretty new to Ubuntu but I managed to install it with no big problems on both my desktop and netbook. When I installed it on my brother's netbook everything went horribly wrong and now I fear the system is close to beyond repair. The problem was first that it said it did not have any space left (seemed ridiculous since it had a lot). Then Ubuntu began booting into a "System is running in low graphics mode error" which I then tried to fix, using all the tips I could find in here but nothing helped. I think the graphics error and lack of space might have been related but I can't be sure. Finally I gave up repairing Ubuntu and went for a reinstall. Shouldn't have done that! I read that I should simply open Ubuntu through a live usb and choose GParted to delete the Linux partitions so I did and rebooted accordingly. Next, I was to install Ubuntu but now I am only given the option to wipe the whole disk for Ubuntu, not install along with windows 7. If I access GParted I can still see the ntfs partitions that hold windows 7 (there are 2: one labeled RECOVERY and another labeled OS and boot) so why can't I access them? Btw. the OS and boot has a little red mark with a warning that 1 cluster is referenced to multiple times, don't know what that means. If I boot without the live usb I am sent directly into a grub rescue "black screen of the computer will follow no orders". Please, I know that the easiest might be to simply wipe the whole thing clean but there are important files and programs on windows 7. Is there a way to just access windows? It is a dell inspiron 1018 mini netbook, so I have no cd input and no windows 7 installation cd.

    Read the article

  • What is the exact problem with multiple inheritance?

    - by Totophil
    I can see people asking all the time whether multiple inheritance should be included into the next version of C# or Java and C++ folks, who are fortunate enough to have this ability, say that this is like giving someone a rope to eventually hang themselves. What’s the matter with the multiple inheritance? Are there any concrete samples?

    Read the article

  • Using ViewModels in ASP.NET MVC 2 - multiple forms

    - by Rob Ellis
    I couldn't find any documentation around using multiple forms in an ASP.NET MVC 2 ViewModel approach. i.e. In the built in application when you select New MVC2 web app, the register page uses a ViewPage which inherits like this:- Inherits="System.Web.Mvc.ViewPage" I wanted to use that approach on a page with multiple forms, but that RegisterModel only supported one form.

    Read the article

  • MySQL query using multiple criteria from checkboxes

    - by jungle_programmer
    I would like to do a multiple search query usig multiple checkboxes which represent particular textboxes. How do i create a mysql query which will be filtering the checked and unchecked checkboxes (probably using if statements)? The query should be able to filter the checked and ucnchecked boxes and query them using the AND condition. Thanks

    Read the article

  • jquery expanding menu+show/hide+multiple instances

    - by mark
    Hi, I have 2 scripts working ok separately but can't get them working together - What I'm after is expanding menus where if the items exceed 10 a 'more' link appears that expands the list, which can also then be hidden. http://www.brianfitzer.ie/test2/ expanding menu is file test12.html toggle+limit: toggle is file test13.html (I have these working separately) And then I need this to be able to be applied in multiple instances as I'll have multiple categories. Any code help greatly appreciated! (i'm a jquery newbie so if you have full code that would be xtra handy)

    Read the article

  • Is the cooling fan on a 2004 graphics card really necessary?

    - by Andrew
    I have an old GeForce 6600 card in my computer, circa 2004. Recently the fan has started playing up and making loud irritating noises. I've tried oiling it with no luck. This is the second fan I've put on the card, the stock one broke ages ago. Is a card this old really likely to need a cooling fan or can I remove it altogether? It has a decent heatsink on the chip but there's not a lot of airflow in that part of the box. Edit: I should add that I seem to remember most mid range graphics cards at the time I bought that didn't have fans (pretty sure they had heatsinks only), which is why I'm wondering.

    Read the article

  • How to solve ATI Radeon 7670M/ Intel HD Switchable Graphics recurring BSOD error?

    - by Ashin Mandal
    I recently bought a VAIO E Series laptop with an ATI Radeon 7670M and Intel HD Switchable Graphics. Around about one month ago, my computer started shutting down with atikmpag.sys blue screen error and the frequency of the errors kept on increasing with time. I am really worried about my VGA Adapter and whether or not it's gone bad. It's a 3 month old laptop! I searched on Google about atikmpag.sys BSOD and most of them suggested that my driver probably needs to be updated. I searched the Sony website and also the ATI website, I did have the latest drivers installed. Yet, I uninstalled the driver and installed it back again. But blue screens just keep coming back again and again. It generally happens more frequently when I have a video running and have paused it to do something else. I hope it's a driver issue!

    Read the article

  • Client PC not booting when certain TFT plugged in - TFT or graphics card failure?

    - by Chake
    here comes something quite strange: On a client machine (DELL Vostro 420) we experienced problems when booting: when turning on the machine beeps normal but doesn't display anything and doesn't boot. After some testing I found out, that this only happens if one (of the two) monitors (Iiyama ProLite E2472HDD) is plugged in while booting. If the other monitor (TFT 2) is plugged in everything is fine. Here a small illustration, TFT 1 is the bad guy: TFT 1 | TFT 2 | failure x | x | x x | | x | x | After BIOS-Phase I can safely plug in TFT 1 and everything works just fine. The question is, what can be done to avoide this behavior: Change monitor? (Iiyama ProLite E2472HDD) Change graphics card? (GeForce 9800 GT) Other suggestions?

    Read the article

  • How to create plots in multiple windows and keep them seperate in R

    - by PaulHurleyuk
    Hello SOers, I'm sure this is an easy problem, but my google / help foo has failed me, so it's up to you. I have an R script that generates several plots, and I want to view all the plots on screen at once (in seperate windows), but I can't work out how to open multiple graphics windows. I'm using ggplot2, but I feel this is a more basic problem, so I'm just using base grapics for this simple example x<-c(1:10) y<-sin(x) z<-cos(x) dev.new() plot(y=y,x=x) dev.off() dev.new() plot(x=x,y=z) But this doesn't work. I'm on Windows if this matters (Windows + Eclipse + StatEt)

    Read the article

  • .NET Graphics.ScaleTransform converts print job to bitmap. Any other way to scale text?

    - by Philip Dunaway
    I'm using Graphics.ScaleTransform to stretch lines of text so they fit the width of the page, and then printing that page. However, this converts the print job to a bitmap - for a print with many pages this causes the size of the print job to rise to obscene proportions, and slows down printing immensely. If I don't scale like this, the print job remains very small as it is just sending text print commands to the printer. My question is, is there any way other than using Graphics.ScaleTransform to stretch the width of the text? Sample code to demonstrate this is below (would be called with Print.Test(True) and Print.Test(False) to show the effects of scaling on print job): Imports System.Drawing Imports System.Drawing.Printing Imports System.Drawing.Imaging Public Class Print Dim FixedFont As Font Dim Area As RectangleF Dim CharHeight As Double Dim CharWidth As Double Dim Scale As Boolean Const CharsAcross = 80 Const CharsDown = 66 Const TestString = "!""#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~" Private Sub PagePrinter(ByVal sender As Object, ByVal e As PrintPageEventArgs) Dim G As Graphics = e.Graphics If Scale Then Dim ws = Area.Width / G.MeasureString(Space(CharsAcross).Replace(" ", "X"), FixedFont).Width G.ScaleTransform(ws, 1) End If For CurrentLine = 1 To CharsDown G.DrawString(Mid(TestString & TestString & TestString, CurrentLine, CharsAcross), FixedFont, Brushes.Black, 0, Convert.ToSingle(CharHeight * (CurrentLine - 1))) Next e.HasMorePages = False End Sub Public Shared Sub Test(ByVal Scale As Boolean) Dim OutputDocument As New PrintDocument With OutputDocument Dim DP As New Print .PrintController = New StandardPrintController .DefaultPageSettings.Landscape = False DP.Area = .DefaultPageSettings.PrintableArea DP.CharHeight = DP.Area.Height / CharsDown DP.CharWidth = DP.Area.Width / CharsAcross DP.Scale = Scale DP.FixedFont = New Font("Courier New", DP.CharHeight / 100, FontStyle.Regular, GraphicsUnit.Inch) .DocumentName = "Test print (with" & IIf(Scale, "", "out") & " scaling)" AddHandler .PrintPage, AddressOf DP.PagePrinter .Print() End With End Sub End Class

    Read the article

  • Sort multiple columns while using a bindingsource or bindinglist

    - by JF
    Hi everyone. I have a problem I am trying to fix and it's sorting a DataGridView on multiple columns. I have read that this option is not a feature built-in the DataGridView and I have to implement it. I have found multiple solutions, but none quite got to do the work. I'm also quite a newbie in C# and I don't know much of the .Net library. I have also read on the MSDN site for info on different classes that might be of use, but no success. Now, let's get to the point. I have a DataGridView, with a BindingList (originally, a BindingSource) that I want to sort, but by multiple keys. My DataGrid has 9 columns and the user should be able to sort on any column. For example, let's say my Datagrid has 3 columns, named : Index, ID, Name. The user wants to sort by Name, implicitly, the next order would be Index and then ID. So, in case 2 names are identical, Index should be the next sort option. Any ideas how this can be made?

    Read the article

  • How to identify a particular entity's Session Factory with Fluent NHibernate and Multiple Databases

    - by Trevor
    I've already asked this question as part of an answer to another question ( see http://stackoverflow.com/questions/2655861/fluent-nhibernate-multiple-databases ) but thought it better to ask again here. My problem is this: I'm using Fluent NHibernate. My application uses multiple databases. Each database has its own entities registered (mapped) against it. The result is that have multiple Session Factories, each one relating to a single DB, and each 'containing' its own set of mapped entities. For loading entities I've created a generic Factory class that provides some standard load methods usable for any registered entity (in any DB). The problem is: The load methods need to use the correct session factory for the entity class I'm busy dealing with. How would I determine which session factory I need to use? I have all the Session Factories 'on hand' (and indexed by database name), I just need a way, knowing just the type of Entity I'm about to load, of choosing the right Session Factory to use. For example: public IBaseBusinessObject CreatePopulatedInstance(Type boType, Guid instanceKey) { IBaseBusinessObject result = null; ISessionFactory sessionFactory = GetSessionFactory(boType); using (ISession session = sessionFactory.OpenSession()) { using (session.BeginTransaction()) { result = (IBaseBusinessObject)session.Get(boType, instanceKey); } } return result; } What needs to go on in GetSessionFactory(boType) ? Thanks for reading!

    Read the article

  • How to avoid multiple, unused has_many associations when using multiple models for the same entity (

    - by mikep
    Hello, I'm looking for a nice, Ruby/Rails-esque solution for something. I'm trying to split up some data using multiple tables, rather than just using one gigantic table. My reasoning is pretty much to try and avoid the performance drop that would come with having a big table. So, rather than have one table called books, I have multiple tables: books1, books2, books3, etc. (I know that I could use a partition, but, for now, I've decided to go the 'multiple tables' route.) Each user has their books placed into a specific table. The actual book table is chosen when the user is created, and all of their books go into the same table. The goal is to try and keep each table pretty much even -- but that's a different issue. One thing I don't particularly want to have is a bunch of unused associations in the User class. Right now, it looks like I'd have to do the following: class User < ActiveRecord::Base has_many :books1, :books2, :books3, :books4, :books5 end class Books1 < ActiveRecord::Base belongs_to :user end class Books2 < ActiveRecord::Base belongs_to :user end First off, for each specific user, only one of the book tables would be usable/applicable, since all of a user's books are stored in the same table. So, only one of the associations would be in use at any time and any other has_many :bookX association that was loaded would be a waste. I don't really know Ruby/Rails does internally with all of those has_many associations though, so maybe it's not so bad. But right now I'm thinking that it's really wasteful, and that there may just be a better, more efficient way of doing this. Is there's some sort of special Ruby/Rails methodology that could be applied here to avoid having to have all of those has_many associations? Also, does anyone have any advice on how to abstract the fact that there's multiple book tables behind a single books model/class?

    Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >