Search Results

Search found 11124 results on 445 pages for 'optical drive'.

Page 30/445 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

  • How do I reformat/reinstall an OS on a hard drive after its been wiped by eban?

    - by Aggrevated
    I am trying to install XP SP2 Home on a Dell Inspiron 531s. Yes it came with Vista but I happen to own a legal copy of XP. I bought the hard drive off eBay(used). I changed the bios settings to boot from CD and when I start up the computer it goes to the hard drive which says its been cleaned using eban XX.XXX.XXX. My problem is that I can't get the PC to boot from the XP disk. I have tried putting the disk into another PC it works. I have put the bad hard drive back in and the dvd+rw works. I am really stumped and am beginning to think that the hard drive is unusable. I only have the sata cords for 1 hard drive to be hooked up at a time. Any ideas or suggestions or confirmation that I can't use this hard drive would be appreciated. Yes I am probably a 'noob' but I have installed XP and Vista many times without any problems. I don't need to be put down on my level of experience I just need answers. Thanks Everyone

    Read the article

  • Write-error on swap-device, Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK

    - by Jan
    My root server at 1&1 was unresponsive on HTTP and SSH, so I logged into the serial console . It flooded my connection with endless error messages like quoted below. I initiated a reboot and now everything seems to work properly. After googling, I installed smartctl and ran a short self test, which told me the device was healthy. Is this likely a disk failure soon to happen or could it be just some program going wild? I assume, the swap device could also grow full when huge amounts of memory get consumed by a buggy program? How can I find out for sure? The sever was already unresponsive a week ago when I just restarted it without proper investigation. The server is running on CentOS. Write-error on swap-device (8:16:8351055) Write-error on swap-device (8:16:8351063) Write-error on swap-device (8:16:8351071) Write-error on swap-device (8:16:8351079) Write-error on swap-device (8:16:8351087) Write-error on swap-device (8:16:8351095) Write-error on swap-device (8:16:8351103) Write-error on swap-device (8:16:8351111) Write-error on swap-device (8:16:8351119) Write-error on swap-device (8:16:8351127) Write-error on swap-device (8:16:8351135) Write-error on swap-device (8:16:8351143) Write-error on swap-device (8:16:8351151) Write-error on swap-device (8:16:8351159) Write-error on swap-device (8:16:8351167) Write-error on swap-device (8:16:8351175) Write-error on swap-device (8:16:8351183) Write-error on swap-device (8:16:8351191) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 9c 00 ef 00 00 08 00 end_request: I/O error, dev sdb, sector 10223855 Write-error on swap-device (8:16:10223863) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 9c 0e 97 00 00 10 00 end_request: I/O error, dev sdb, sector 10227351 Write-error on swap-device (8:16:10227359) Write-error on swap-device (8:16:10227367) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 9c b0 1f 00 00 10 00 end_request: I/O error, dev sdb, sector 10268703 Write-error on swap-device (8:16:10268711) Write-error on swap-device (8:16:10268719) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 a0 84 7f 00 00 08 00 end_request: I/O error, dev sdb, sector 10519679 Write-error on swap-device (8:16:10519687) sd 1:0:0:0: [sdb] Unhandled error code sd 1:0:0:0: [sdb] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 1:0:0:0: [sdb] CDB: Write(10): 2a 00 00 a7 26 af 00 04 00 00 end_request: I/O error, dev sdb, sector 10954415 Write-error on swap-device (8:16:10954423) Write-error on swap-device (8:16:10954431) Write-error on swap-device (8:16:10954439) Write-error on swap-device (8:16:10954447) Write-error on swap-device (8:16:10954455) Write-error on swap-device (8:16:10954463) Write-error on swap-device (8:16:10954471) Write-error on swap-device (8:16:10954479) Write-error on swap-device (8:16:10954487) Write-error on swap-device (8:16:10954495) Write-error on swap-device (8:16:10954503) Write-error on swap-device (8:16:10954511) Write-error on swap-device (8:16:10954519) Write-error on swap-device (8:16:10954527) Write-error on swap-device (8:16:10954535) Write-error on swap-device (8:16:10954543) Write-error on swap-device (8:16:10954551) Write-error on swap-device (8:16:10954559) Write-error on swap-device (8:16:10954567) Write-error on swap-device (8:16:10954575) Write-error on swap-device (8:16:10954583) Write-error on swap-device (8:16:10954591) Write-error on swap-device (8:16:10954599) Write-error on swap-device (8:16:10954607) Write-error on swap-device (8:16:10954615) Write-error on swap-device (8:16:10954623) Write-error on swap-device (8:16:10954631) Write-error on swap-device (8:16:10954639) Write-error on swap-device (8:16:10954647) Write-error on swap-device (8:16:10954655) Write-error on swap-device (8:16:10954663) Write-error on swap-device (8:16:10954671) Write-error on swap-device (8:16:10954679) Write-error on swap-device (8:16:10954687) Write-error on swap-device (8:16:10954695) Write-error on swap-device (8:16:10954703) Write-error on swap-device (8:16:10954711) Write-error on swap-device (8:16:10954719) Write-error on swap-device (8:16:10954727) Write-error on swap-device (8:16:10954735) Write-error on swap-device (8:16:10954743) Write-error on swap-device (8:16:10954751) Write-error on swap-device (8:16:10954759) Write-error on swap-device (8:16:10954767) Write-error on swap-device (8:16:10954775) Write-error on swap-device (8:16:10954783) Write-error on swap-device (8:16:10954791) Write-error on swap-device (8:16:10954799) Write-error on swap-device (8:16:10954807) Write-error on swap-device (8:16:10954815) Write-error on swap-device (8:16:10954823) Write-error on swap-device (8:16:10954831) Write-error on swap-device (8:16:10954839) Write-error on swap-device (8:16:10954847) Write-error on swap-device (8:16:10954855) Write-error on swap-device (8:16:10954863) Write-error on swap-device (8:16:10954871) Write-error on swap-device (8:16:10954879) Write-error on swap-device (8:16:10954887) Write-error on swap-device (8:16:10954895) Write-error on swap-device (8:16:10954903) Write-error on swap-device (8:16:10954911) Write-error on swap-device (8:16:10954919) Write-error on swap-device (8:16:10954927) Write-error on swap-device (8:16:10954935) Write-error on swap-device (8:16:10954943) Write-error on swap-device (8:16:10954951) Write-error on swap-device (8:16:10954959) Write-error on swap-device (8:16:10954967) Write-error on swap-device (8:16:10954975) Write-error on swap-device (8:16:10954983) Write-error on swap-device (8:16:10954991) Write-error on swap-device (8:16:10954999) Write-error on swap-device (8:16:10955007) Write-error on swap-device (8:16:10955015) Write-error on swap-device (8:16:10955023) Write-error on swap-device (8:16:10955031) Write-error on swap-device (8:16:10955039) Write-error on swap-device (8:16:10955047) Write-error on swap-device (8:16:10955055) Write-error on swap-device (8:16:10955063) Write-error on swap-device (8:16:10955071) Write-error on swap-device (8:16:10955079) Write-error on swap-device (8:16:10955087) Write-error on swap-device (8:16:10955095) Write-error on swap-device (8:16:10955103) Write-error on swap-device (8:16:10955111) Write-error on swap-device (8:16:10955119) Write-error on swap-device (8:16:10955127) Write-error on swap-device (8:16:10955135) Write-error on swap-device (8:16:10955143) Write-error on swap-device (8:16:10955151) Write-error on swap-device (8:16:10955159) Write-error on swap-device (8:16:10955167) Write-error on swap-device (8:16:10955175) Write-error on swap-device (8:16:10955183)

    Read the article

  • Ubuntu 9.1 Install from Disc Stalls After "Install Ubuntu" Sleclection is Made - eMachine

    - by nicorellius
    I am trying to install Ubuntu 9.1 from the ISO on a CD (it needs to be this version) on an eMachine with a brand new Seagate hard disk. The CD boots OK, and I choose the language. Then I am presented with the choices: Try Ubuntu Install Ubuntu.... etc, etc... I have tried the top two choices several times (trying Ubuntu and installing it), but each and every time the installation stalls and the disc stops spinning right after I hit enter after choosing the option I want. I have tried different CD/DVD drives, changing the jumpers on both CD drives, different hard drives, and nothing works. Maybe there is a BIOS setting that is choking the installation? Any help would be appreciated.

    Read the article

  • How to backup a networked drive?

    - by nute
    I have a networked drive (Iomega Media Drive). To be safe in case the drives crashes, I've decided to buy an additional networked drive (WD MyBook World). Now, how do I backup one onto the other continuously? The WD drive came with a backup software (trial version, they didn't say that when i bought it), however it doesn't allow me to select a networked drive, only local drives. How do I backup a NETWORKED DRIVE ONTO A NETWORKED DRIVE? Thanks

    Read the article

  • 6 Ways to Free Up Hard Drive Space Used by Windows System Files

    - by Chris Hoffman
    We’ve previously covered the standard ways to free up space on Windows. But if you have a small solid-state drive and really want more hard space, there are geekier ways to reclaim hard drive space. Not all of these tips are recommended — in fact, if you have more than enough hard drive space, following these tips may actually be a bad idea. There’s a tradeoff to changing all of these settings. Erase Windows Update Uninstall Files Windows allows you to uninstall patches you install from Windows Update. This is helpful if an update ever causes a problem — but how often do you need to uninstall an update, anyway? And will you really ever need to uninstall updates you’ve installed several years ago? These uninstall files are probably just wasting space on your hard drive. A recent update released for Windows 7 allows you to erase Windows Update files from the Windows Disk Cleanup tool. Open Disk Cleanup, click Clean up system files, check the Windows Update Cleanup option, and click OK. If you don’t see this option, run Windows Update and install the available updates. Remove the Recovery Partition Windows computers generally come with recovery partitions that allow you to reset your computer back to its factory default state without juggling discs. The recovery partition allows you to reinstall Windows or use the Refresh and Reset your PC features. These partitions take up a lot of space as they need to contain a complete system image. On Microsoft’s Surface Pro, the recovery partition takes up about 8-10 GB. On other computers, it may be even larger as it needs to contain all the bloatware the manufacturer included. Windows 8 makes it easy to copy the recovery partition to removable media and remove it from your hard drive. If you do this, you’ll need to insert the removable media whenever you want to refresh or reset your PC. On older Windows 7 computers, you could delete the recovery partition using a partition manager — but ensure you have recovery media ready if you ever need to install Windows. If you prefer to install Windows from scratch instead of using your manufacturer’s recovery partition, you can just insert a standard Window disc if you ever want to reinstall Windows. Disable the Hibernation File Windows creates a hidden hibernation file at C:\hiberfil.sys. Whenever you hibernate the computer, Windows saves the contents of your RAM to the hibernation file and shuts down the computer. When it boots up again, it reads the contents of the file into memory and restores your computer to the state it was in. As this file needs to contain much of the contents of your RAM, it’s 75% of the size of your installed RAM. If you have 12 GB of memory, that means this file takes about 9 GB of space. On a laptop, you probably don’t want to disable hibernation. However, if you have a desktop with a small solid-state drive, you may want to disable hibernation to recover the space. When you disable hibernation, Windows will delete the hibernation file. You can’t move this file off the system drive, as it needs to be on C:\ so Windows can read it at boot. Note that this file and the paging file are marked as “protected operating system files” and aren’t visible by default. Shrink the Paging File The Windows paging file, also known as the page file, is a file Windows uses if your computer’s available RAM ever fills up. Windows will then “page out” data to disk, ensuring there’s always available memory for applications — even if there isn’t enough physical RAM. The paging file is located at C:\pagefile.sys by default. You can shrink it or disable it if you’re really crunched for space, but we don’t recommend disabling it as that can cause problems if your computer ever needs some paging space. On our computer with 12 GB of RAM, the paging file takes up 12 GB of hard drive space by default. If you have a lot of RAM, you can certainly decrease the size — we’d probably be fine with 2 GB or even less. However, this depends on the programs you use and how much memory they require. The paging file can also be moved to another drive — for example, you could move it from a small SSD to a slower, larger hard drive. It will be slower if Windows ever needs to use the paging file, but it won’t use important SSD space. Configure System Restore Windows seems to use about 10 GB of hard drive space for “System Protection” by default. This space is used for System Restore snapshots, allowing you to restore previous versions of system files if you ever run into a system problem. If you need to free up space, you could reduce the amount of space allocated to system restore or even disable it entirely. Of course, if you disable it entirely, you’ll be unable to use system restore if you ever need it. You’d have to reinstall Windows, perform a Refresh or Reset, or fix any problems manually. Tweak Your Windows Installer Disc Want to really start stripping down Windows, ripping out components that are installed by default? You can do this with a tool designed for modifying Windows installer discs, such as WinReducer for Windows 8 or RT Se7en Lite for Windows 7. These tools allow you to create a customized installation disc, slipstreaming in updates and configuring default options. You can also use them to remove components from the Windows disc, shrinking the size of the resulting Windows installation. This isn’t recommended as you could cause problems with your Windows installation by removing important features. But it’s certainly an option if you want to make Windows as tiny as possible. Most Windows users can benefit from removing Windows Update uninstallation files, so it’s good to see that Microsoft finally gave Windows 7 users the ability to quickly and easily erase these files. However, if you have more than enough hard drive space, you should probably leave well enough alone and let Windows manage the rest of these settings on its own. Image Credit: Yutaka Tsutano on Flickr     

    Read the article

  • Any large USB sticks with integrated card readers?

    - by Al
    I have one of Kingston's DataTraveller Micro Reader USB sticks, a fantastic memory stick with an integrated micro SD and M2 card reader. However, I've gradually filled it to the brim and am looking for a larger stick. Unfortunately, Kingston don't make them any bigger than the 4GB one that I currently have and I was hoping to go to 16GB now that they've come down in price. Does anyone know if any manufacturers make something similar: a 16GB stick with a micro SD card reader integrated (I'm not bothered about the M2 reader).

    Read the article

  • Data recovery on a data HDD (no OS)

    - by aCuria
    I am helping a family member with a dead hard disk. It is a seagate 200Gb 3.5" HDD in one of those old-school external enclosures. The problem was that windows failed to detect the hard disk when plugged in through USB. I removed the hard disk from its enclosure, and plugged it into my desktop PC. The BIOS does detect it upon POST, but unfortunately windows 7 would refuse to boot. It will get stuck on the loading screen with the glowing windows logo. Safe mode doesn't help either. What options do I have before going for some professional data recovery? edit: Someone modified the Title to something completely different from what I was asking, i just changed it back. 1) 2 HDD drives, DiskA(Dead), DiskB(my OS disk) 2) when B is connected to my system, everything works fine 3) when A AND B is connected, failure to boot. POSTs fine, but windows wont load 4) A has NO OS, its PURE data. It came from an EXTERNAL HDD enclosure which doesnt belong to me, and im trying to do data recovery.

    Read the article

  • Troubleshooting major performance issue: Is culprit Intel RST, Hard drive, or something else?

    - by Sean Killeen
    The Setup I have the following components that come into play in this situation: ASUS P8Z68 V/PRO motherboard a RAID1 configuration (1x 1TB drive, 1 x 2TB drive -- I explain below), accelerated with an SSD using Intel's RST software, and 1 TB drive standing by as a spare. Core i7 2600k 32 GB RAM Windows 8.1 This box was designed to be beast, and until just recently, was very good at being just that. What's Happening The system has slowed to a crawl whenever it touches the disk. Things appear to work at normal speed when dealing with memory. For example, typing this is fine, but saving it to disk from notepad gave me a 5-7 second pause when clicking save. The disks appear to be at 100% all the time (e.g. the light on the disk access on the PC is solidly on -- not even any flashing) In ProcExp it appears that the disk is barely being utilized at all: Intel RST reports that everything is fine: Other Details Prior to this happening, RST had reported that my drives were failing (one went bad, one was throwing SMART events). This made sense; they were at the tail end of their warranty and the PC is on almost all the time. I RMA'd the drives via Seagate. In the meantime, I'd purchased a 2TB drive because I didn't realize that the 1TB drives were under warranty. I figured I'd replace the other 1 TB drive with another 2 TB when it died but then discovered the warranty. AFAIK, I haven't done any major updates since 8.1 and it worked fine after those. Question(s) How can I troubleshoot this? What is the best way to try to figure out why disks are being maxed out despite the OS reporting barely any disk usage and that everything is OK? Given the failures, etc. that I describe above, is it possible that the problem could be the I/O on the motherboard itself? If so, how would I even be able to diagnose it? I'm betting the drives that Seagate gave me are refurbished (didn't think to look; that's dumb). Is it possible that the same model drive, refurbished, could somehow cause this? In terms of how RAID1 works, is it possible that one drive is "falling behind" somehow, and that the RAID1 is constantly trying to fix the mirroring? If so, this seems like Intel RST would report on it, but I wanted to consider it as an option.

    Read the article

  • Windows detected a hard disk failure* - what should I do?

    - by bart
    I'm using Windows 7 x64 Ultimate, I'm getting windows error popups like this one for about 3 days, multiple times a day: This Samsung SpinPoint F3 HD502HJ 500 GB is about 2 years old and I already checked it with Samsung ES Tool 3.0, did all the scans (took hours) and everything is fine! I have no malware, viruses and this started to happen after I have had some electrcity issues at my house (multiple power surges / overvolatege during the night, PC was connected, but turned off), any ideas? What other test should I perform? I believe the disk could be damaged, but then diagnostic tools should prove this, right? *in fact "Windows detected hard disk problem" but I was unable to put word "problem" within the title as well.

    Read the article

  • Google Drive SDK: Writing your First App in Java

    Google Drive SDK: Writing your First App in Java During this session we'll show how to build a complete Java application that uses the Google Drive API to upload a file into the user's Drive account. If you follow along with the presentation, you can have a working Drive command-line application running by the end of the session. From: GoogleDevelopers Views: 0 0 ratings Time: 00:00 More in Science & Technology

    Read the article

  • How do I copy an existing hard disc to a new one so I can boot off the new disc?

    - by Brian Hooper
    I currently have a failing hard drive which is the only hard drive in the machine. I have just bought a new hard drive to replace it, and my plan is to copy the contents of the old drive onto the new one, and then replace the old drive in the machine with the new one. I presumably can't just copy the whole directory structure (or can I)? What do I need to do to manage this, assuming it is possible? Is there a utility to do this for me? (The old drive is hopefully good for a few more hours.) (I hope by this means to keep all the software and configuration files as they are, to avoid having to re-install everything. Can that be done?)

    Read the article

  • Ubuntu - Automatically mount external drives to /media/LABEL on boot without a user logged in?

    - by endolith
    This question is similar, but kind of the opposite of what I want. I want external USB drives to be mounted automatically at boot, without anyone logged in, to locations like /media/<label>. I don't want to have to enter all the data into fstab, partially because it's tedious and annoying, but mostly because I can't predict what I'll be plugging into it or how the partitions will change in the future. I want the drives to be accessible to things like MPD, and available when I log in with SSH. gnome-mount seems to only mount things when you are locally logged into a Gnome graphical session.

    Read the article

  • Reading a ZFS USB drive with Mac OS X Mountain Lion

    - by Karim Berrah
    The problem: I'm using a MacBook, mainly with Solaris 11, but something with Mac OS X (ML). The only missing thing is that Mac OS X can't read my external ZFS based USB drive, where I store all my data. So, I decided to look for a solution. Possible solution: I decided to use VirtualBox with a Solaris 11 VM as a passthrough to my data. Here are the required steps: Installing a Solaris 11 VM Install VirtualBox on your Mac OS X, add the extension pack (needed for USB) Plug your ZFS based USB drive on your Mac, ignore it when asked to initialize it. Create a VM for Solaris (bridged network), and before installing it, create a USB filter (in the settings of your Vbox VM, go to Ports, then USB, then add a new USB filter from the attached device "grey usb-connector logo with green plus sign")  Install a Solaris 11 VM, boot it, and install the Guest addition check with "ifconfg -a" the IP address of your Solaris VM Creating a path to your ZFS USB drive In MacOS X, use the "Disk Utility" to unmount the USB attached drive, and unplug the USB device. Switch back to VirtualBox, select the top of the window where your Solaris 11 is running plug your ZFS USB drive, select "ignore" if Mac OS invite you to initialize the disk In the VirtualBox VM menu, go to "Devices" then "USB Devices" and select from the dropping menu your "USB device" Connection your Solaris VM to the USB drive Inside Solaris, you might now check that your device is accessible by using the "format" cli command If not, repeat previous steps Now, with root privilege, force a zpool import -f myusbdevicepoolname because this pool was created on another system check that you see your new pool with "zpool status" share your pool with NFS: share -F NFS /myusbdevicepoolname Accessing the USB ZFS drive from Mac OS X This is the easiest step: access an NFS share from mac OS Create a "ZFSdrive" folder on your MacOS desktop from a terminal under mac OS: mount -t nfs IPadressofMySoalrisVM:/myusbdevicepoolname  /Users/yourusername/Desktop/ZFSdrive et voila ! you might access your data, on a ZFS USB drive, directly from your Mountain Lion Desktop. You might play with the share rights in order to alter any read/write rights as needed. You might activate compression, encryption inside the Solaris 11 VM ...

    Read the article

  • SEAGATE Barracuda 7200.11 HDD not running

    - by Dane411
    After a huge research, I'm stuck at the beggining of getting my HDD data back. Whats happening to me is that in the moment when I plug the power wire to my external 1TB SEAGATE Barracuda 7200.11 ST31000333AS HDD Fw LC15, it makes the sound like it's spinning to almost full speed and then shuts down and spins up again, and so on. It's well known that those HDDs have a bad firmware that someday randomly fails. There are like 2 main problems identified, BSY (busy) state, and LBA0 error. Last time I connected it to power nothing happened, it didnt try to start at all, is it that so called bricked state? I guess my HDDs error is the first one, but I dont really know if what I described is that BSY state or not, neither I know how to check it. How could I know it? Thank you so much!

    Read the article

  • Can't Read/Write the Hard disk used in NAS

    - by mgpyone
    I've lately purchased a Synology DS212j and I intended to use my two 3.5" HDs into it. One of them was in used as an external HD. Thus when I install these two unit in NAS, it asked me to formatted in order to used with its format (I think it's ext3?) . I installed the Disks and omit the formatting option. I just got another 3.5" Hard Disk now. I've installed it in the NAS. everything's fine. However, when I take out the (used) HD from the NAS and install back in the standalone casing, I found out that it can't be read from both OSX an Windows 7. I've tried with ext2sd and I only found 2GB portion of the whole 1.5 TB Hard Disk. Here's another reference from EASEUS Partition Master

    Read the article

  • How to automatically take daily HDD backup?

    - by user13107
    I think my HDD might have crashed. I don't want to lose data if this happens again. I have dual boot Windows/Ubuntu system. What is the best way to backup data and other software settings in Ubuntu? I don't care much about Windows partition, important stuff is in Ubuntu. I have 1 Tb external HDD (laptop HDD is of 500 gb total). One way would be to run rsync every day (or via cronjob) to backup everything to external HDD. What might be better ways of achieving this (backup)? Also are instant backup software recommended? Are there any disadvantages of instant backup as opposed to daily rsync?

    Read the article

  • Weird Ubuntu Desktop Boot Partition On External Hard Drive

    - by Magnitus
    I have a Thinkpad with Windows 7. Last time I installed an Ubuntu/Windows dual boot, Windows was never same after and regularly got corrupted so this time, I installed Ubuntu on a separate external hard drive. I took a 500 GB external hard drive and used Windows to shrink the partition on it to 400 GB, freeing 100 GB to install Ubuntu. Then I modified the booting priority of my computer to boot from the external hard drive if present. Then, I installed Ubuntu desktop on the external hard drive using a DVD, picked the most simplistic partitioning scheme I could get away with (didn't go auto as it didn't include the external hard drive as a choice) and voilà. Fast forward some time and I'm trying to refresh my understanding of Linux partitions to install a bunch of servers, so I'm looking at the current partitioning scheme on my external hard drive and find the boot partition puzzling... sda is my integrated hard drive with Windows 7. sdb is my Ubuntu desktop external hard drive. Running parted on sdb, I get this: (parted) print Model: WD My Passport 0740 (scsi) Disk /dev/sdb: 500GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 393GB 393GB primary ntfs boot 2 393GB 500GB 107GB extended 5 393GB 425GB 32.8GB logical linux-swap(v1) 6 425GB 500GB 74.6GB logical ext4 At this point, I'm wondering why the ntfs partition is flagged as "boot" and not my ext4 partition which is the partition that contains / (and by extension, /boot since it's not on its own separate partition). Looking at mtab only confirms what I already know: eric@eric-ThinkPad-W530:~$ sudo cat /etc/mtab /dev/sdb6 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/cgroup tmpfs rw 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 none /run/user tmpfs rw,noexec,nosuid,nodev,size=104857600,mode=0755 0 0 none /sys/fs/pstore pstore rw 0 0 systemd /sys/fs/cgroup/systemd cgroup rw,noexec,nosuid,nodev,none,name=systemd 0 0 gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,user=eric 0 0 /dev/sdb1 /media/eric/My\040Passport fuseblk rw,nosuid,nodev,allow_other,default_permissions,blksize=4096 0 0 My lack of understanding concerning this is not vital to anything (this is only my development desktop partition), but somehow annoys me. Any insight that could shed some light on this would be welcome.

    Read the article

  • Ubuntu will not boot without the pen-drive [closed]

    - by user71238
    Possible Duplicate: Can't boot without Flash Drive plugged in I've just installed Ubuntu on my PC and now it doesn't start unless I change the boot priority, if boot priority is my HD then it doesn't start and if boot priority is my pen-drive then it starts. If I remove my pen-drive, the system keep working normal, but if a restart my PC without the pen-drive, it will not start. Could someone help me?

    Read the article

  • Logitech Optical Mouse Frozen In Middle of Windows XP Pro Screen

    - by Code Sherpa
    I have a Logitech Optical Mouse/Keyboard. I have been using them just fine with the system drivers for almost a year now. I recently updated my Kaspersky software and rebooted. Now the mouse is frozen in the middle of my screen. I am not able to login to the Windows XP Pro box that has the frozen mouse (because i can't work the mouse) but am able to remote desktop to this computer. Things I know / have tried: When I boot on the problem computer, I am able to use the keyboard, but not the mouse. I have installed the latest version of Logitech's SetPoint (with the updated drivers) on the problem computer (via remote desktop) and that didn't seem to matter. I bought new batteries for the mouse and that didn't matter. I have tried the mouse/keyboard on another computer and the mouse works just fine there. My suspicion is that the Kaspersky install has overwritten a driver of some sort. Things I have not done (and would appreciate detailed steps if you feel this is the way to go): 1) Uninstalled all the mouse drivers on the machine and reboot. Then, reinstall. Note: When I get to the Device Manager I don't see an option for Human Interface Devices (where the mouse device is). Here are my options: Computer, Disk Drives, DVD/CD-Rom drives, Floppy controllers, IDE ATA/ATAPI, Imaging devices, Network Adapters, Other devices, Ports, Processors, Sound, video, and gaming, System devices, USB controllers. Also, I should point out that Video Controller is the only thing under Other devices and it has a yellow exclamation mark. The same is true for all the items under Universal Serial Bus controllers. I think this means I have to update my BIOS but, since my mouse was working just fine without doing that, I don't think that is my problem. So, how do I get to my Mouse Device? 2) Update my BIOS. Note: As pointed out above, I don't think this matters as my mouse was working just fine under my computer's current BIOS version. Thanks for your help.

    Read the article

  • Logitech Optical Mouse Frozen In Middle of Windows XP Pro Screen

    - by Code Sherpa
    Hi. I have a Logitech Optical Mouse/Keyboard. I have been using them just fine with the system drivers for almost a year now. I recently updated my Kaspersky software and rebooted. Now the mouse is frozen in the middle of my screen. I am not able to login to the Windows XP Pro box that has the frozen mouse (because i can't work the mouse) but am able to remote desktop to this computer. Things I know / have tried: When I boot on the problem computer, I am able to use the keyboard, but not the mouse. I have installed the latest version of Logitech's SetPoint (with the updated drivers) on the problem computer (via remote desktop) and that didn't seem to matter. I bought new batteries for the mouse and that didn't matter. I have tried the mouse/keyboard on another computer and the mouse works just fine there. My suspicion is that the Kaspersky install has overwritten a driver of some sort. Things I have not done (and would appreciate detailed steps if you feel this is the way to go): 1) Uninstalled all the mouse drivers on the machine and reboot. Then, reinstall. Note: When I get to the Device Manager I don't see an option for Human Interface Devices (where the mouse device is). Here are my options: Computer, Disk Drives, DVD/CD-Rom drives, Floppy controllers, IDE ATA/ATAPI, Imaging devices, Network Adapters, Other devices, Ports, Processors, Sound, video, and gaming, System devices, USB controllers. Also, I should point out that Video Controller is the only thing under Other devices and it has a yellow exclamation mark. The same is true for all the items under Universal Serial Bus controllers. I think this means I have to update my BIOS but, since my mouse was working just fine without doing that, I don't think that is my problem. So, how do I get to my Mouse Device? 2) Update my BIOS. Note: As pointed out above, I don't think this matters as my mouse was working just fine under my computer's current BIOS version. Thanks for your help.

    Read the article

  • Server 2008 Task Scheduler Mapped Drive Access C#

    - by user219313
    I'm trying do get Server 2008's Task Scheduler to run a C# console app which backs up data to a mapped backup drive somewhere on FastHosts network. I've written a test app which simply does this Directory.CreateDirectory("Z:\" + DateTime.Now.Ticks.ToString()); i.e. just creates a directory on the root of this Z drive. This works fine when I just run the .exe but when I schedule it in Task Scheduler it says the task has completed with return code 3762507597 - I can't find any info on what this means. I'm running the task with the highest Admin privelages as far as I can see.

    Read the article

  • USB flash drive serial number specification

    - by clyfe
    I retrieve a USB flash drive serial number by means of ioctl HDIO_GET_IDENTITY as described here. Yet, for some flash drives there is no serial (for example my SanDisk Cruzer). Why some drives don not return a serial number? a) HDIO_GET_IDENTITY not implemented in driver ? b) They just don't have one ? c) Other ? (what?) Is there a specification (like IEEE) that describes where and how the serial number is stored inside the flash drive?

    Read the article

  • how do i install a game patch on an external hard drive

    - by shadow
    I have a 2tb external hard drive and I want to install battlefield 1942 on it. i can get the game on the hard drive without problems, and it runs great. the problem is that i have an outdated version, and i need to install a patch. thats when it gets iffy. i get the patch and start the install, and it finishes, but it doesnt install to the game itself. it goes to its own seperate folder, and that does nothing to the game. the patch installer doesnt ask me where the game is, and so im thinking that it cant find the game itself, and then screws up. any help would be great!

    Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >