Search Results

Search found 7072 results on 283 pages for 'peopletools 8 50'.

Page 30/283 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

  • What's the best way to cache a growing database table for html generation?

    - by McLeopold
    I've got a database table which will grow in size by about 5000 rows a hour. For a key that I would be querying by, the query will grow in size by about 1 row every hour. I would like a web page to show the latest rows for a key, 50 at a time (this is configurable). I would like to try and implement memcache to keep database activity low for reads. If I run a query and create a cache result for each page of 50 results, that would work until a new entry is added. At that time, the page of latest results gets new result and the oldest results drops off. This cascades down the list of cached pages causing me to update every cache result. It seems like a poor design. I could build the cache pages backwards, then for each page requested I should get the latest 2 pages and truncate to the proper length of 50. I'm not sure if this is good or bad? Ideally, the mechanism I use to insert a new row would also know how to invalidate the proper cache results. Has someone already solved this problem in a widely acceptable way? What's the best method of doing this? EDIT: If my understanding of the MYSQL query cache is correct, it has table level granularity in invalidation. Given the fact that I have about 5000 updates before a query on a key should need to be invalidated, it seems that the database query cache would not be used. MS SQL caches execution plans and frequently accessed data pages, so it may do better in this scenario. My query is not against a single table with TOP N. One version has joins to several tables and another has sub-selects. Also, since I want to cache the html generated table, I'm wondering if a cache at the web server level would be appropriate? Is there really no benefit to any type of caching? Is the best advice really to just allow a website site query to go through all the layers and hit the database every request?

    Read the article

  • Developing a search algorithm

    - by Richart Bremer
    I want to create a basic search engine, and I want you to give me some ideas how to filter out the best results for my visitors. I have three fields regarding a product the user can search in: Title Category Description I came up with these ideas and I ask you to either competently criticize them or add to them. If the search term occurs in all three fields it should be among the first results. If it is in two of the fields it is below the results of 1. Combine the amount of occurences and output a value in per cent. For instance if in all fields together the term clock appeared 50 times and in all fields together there are 200 words, then the per cent value is 50/200*100 = 25%. Another product entry amounts to say 20% so product one having 25% is listed before product two having 20%.

    Read the article

  • Installed 11.10 on shared drive, when other partition mounted, HDD shown full

    - by Thebetpet
    I just partitioned a 500GB HDD 50%-50%. I installed ubuntu 11.10 on one half and copied a load of files onto the other. When I don't mount the other partition, it shows I have used 12.1GB and have about 240GB free. The second I mount the other partition, I can't copy any files over and get a disk full message. There is about 10-20GB Free on the other partition. Am I doing something wrong or is this a bug?

    Read the article

  • Google Analytics account setup for multiple personal websites?

    - by User
    I have multiple personal websites that I develop and plan to develop more over time. The number of websites is currently greater than one but less than 50. Currently I have a single Google account with a single analytics account that has a web property for each of my sites. My understanding is that you can have up to 25 analytics accounts attached to a single google account and each of those 25 acccounts can have up to 50 web properties in them which would allow me to track up to 1,250 sites. I don't think I'll be hitting that number anytime soon, however are there other reasons to structure accounts differently, such as using a separate google account for each site and then adding myself as an administrator?

    Read the article

  • IT????IFRS??????????

    - by junko.ishikawa
    5???IT????IFRS????????????????????????????????????????????????????????????????????????·????·????????IT?????????????????????????? IFRS???????????????????????????????????????IFRS????????????????????????????????????????????????????????????????? ???50?????????????????????

    Read the article

  • Drawing a WPF UserControl with DataBinding to an Image

    - by LorenVS
    Hey Everyone, So I'm trying to use a WPF User Control to generate a ton of images from a dataset where each item in the dataset would produce an image... I'm hoping I can set it up in such a way that I can use WPF databinding, and for each item in the dataset, create an instance of my user control, set the dependency property that corresponds to my data item, and then draw the user control to an image, but I'm having problems getting it all working (not sure whether databinding or drawing to the image is my problem) Sorry for the massive code dump, but I've been trying to get this working for a couple of hours now, and WPF just doesn't like me (have to learn at some point though...) My User Control looks like this: <UserControl x:Class="Bleargh.ImageTemplate" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:c="clr-namespace:Bleargh" x:Name="ImageTemplateContainer" Height="300" Width="300"> <Canvas> <TextBlock Canvas.Left="50" Canvas.Top="50" Width="200" Height="25" FontSize="16" FontFamily="Calibri" Text="{Binding Path=Booking.Customer,ElementName=ImageTemplateContainer}" /> <TextBlock Canvas.Left="50" Canvas.Top="100" Width="200" Height="25" FontSize="16" FontFamily="Calibri" Text="{Binding Path=Booking.Location,ElementName=ImageTemplateContainer}" /> <TextBlock Canvas.Left="50" Canvas.Top="150" Width="200" Height="25" FontSize="16" FontFamily="Calibri" Text="{Binding Path=Booking.ItemNumber,ElementName=ImageTemplateContainer}" /> <TextBlock Canvas.Left="50" Canvas.Top="200" Width="200" Height="25" FontSize="16" FontFamily="Calibri" Text="{Binding Path=Booking.Description,ElementName=ImageTemplateContainer}" /> </Canvas> </UserControl> And I've added a dependency property of type "Booking" to my user control that I'm hoping will be the source for the databound values: public partial class ImageTemplate : UserControl { public static readonly DependencyProperty BookingProperty = DependencyProperty.Register("Booking", typeof(Booking), typeof(ImageTemplate)); public Booking Booking { get { return (Booking)GetValue(BookingProperty); } set { SetValue(BookingProperty, value); } } public ImageTemplate() { InitializeComponent(); } } And I'm using the following code to render the control: List<Booking> bookings = Booking.GetSome(); for(int i = 0; i < bookings.Count; i++) { ImageTemplate template = new ImageTemplate(); template.Booking = bookings[i]; RenderTargetBitmap bitmap = new RenderTargetBitmap( (int)template.Width, (int)template.Height, 120.0, 120.0, PixelFormats.Pbgra32); bitmap.Render(template); BitmapEncoder encoder = new PngBitmapEncoder(); encoder.Frames.Add(BitmapFrame.Create(bitmap)); using (Stream s = File.OpenWrite(@"C:\Code\Bleargh\RawImages\" + i.ToString() + ".png")) { encoder.Save(s); } } EDIT: I should add that the process works without any errors whatsoever, but I end up with a directory full of plain-white images, not text or anything... And I have confirmed using the debugger that my Booking objects are being filled with the proper data... EDIT 2: Did something I should have done a long time ago, set a background on my canvas, but that didn't change the output image at all, so my problem is most definitely somehow to do with my drawing code (although there may be something wrong with my databinding too)

    Read the article

  • Search like google

    - by Rajanikant
    I have a task to make a search module in which i have database users and tablename userProfile and i want to search profile when i entered text in text box for ex. if i entered "I am looking for MBA in delhi" or 'mba information in delhi' it will displayed all user registered expertise as mba and city in delhi . this will be like job portal or any social networking portal my database is -- phpMyAdmin SQL Dump -- version 2.8.1 -- http://www.phpmyadmin.net -- Host: localhost -- Generation Time: May 01, 2010 at 10:58 AM -- Server version: 5.0.21 -- PHP Version: 5.1.4 -- Database: users -- -- Table structure for table userProfile CREATE TABLE userprofile ( id int(11) NOT NULL auto_increment, name varchar(50) collate latin1_general_ci NOT NULL, expertise varchar(50) collate latin1_general_ci NOT NULL, city varchar(50) collate latin1_general_ci NOT NULL, state varchar(50) collate latin1_general_ci NOT NULL, discription varchar(500) collate latin1_general_ci NOT NULL, PRIMARY KEY (id) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 COLLATE=latin1_general_ci AUTO_INCREMENT=3 ; -- -- Dumping data for table userProfile INSERT INTO userProfile VALUES (1, 'a', 'MBA HR', 'Delhi', 'Delhi', 'Fortune is top management college in Delhi, Best B-schools in India providing business studies and management training. FIIB is Delhi based most ranked ...'); INSERT INTO userProfile VALUES (2, 'b', 'MBA marketing', 'Delhi', 'Delhi', 'Fortune is top management college in Delhi, Best B-schools in India providing business studies and management training. FIIB is Delhi based most ranked ...'); and search.php page <?php include("config.php"); include("class.search.php"); $br=new search(); if($_POST['searchbutton']) { $str=$_POST['textfield']; $brstr=$br->breakkey($str); } ?> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Untitled Document</title> </head> <body> <table width="100%" border="0"> <form name="frmsearch" method="post"> <tr> <td width="367">&nbsp;</td> <td width="300"><label> <input name="textfield" type="text" id="textfield" size="50" /> </label></td> <td width="294"><label> <input type="submit" name="searchbutton" id="button" value="Search" /> </label></td> </tr></form> <tr> <td>&nbsp;</td> <td>&nbsp;</td> <td>&nbsp;</td> </tr> <tr> <td>&nbsp;</td> <td>&nbsp;</td> <td>&nbsp;</td> </tr> </table> </body> </html> and config.php is <?php error_reporting(E_ALL); $host="localhost"; $username="root"; $password=""; $dbname="users"; $con=mysql_connect($host,$username,$password) or die("could not connect database"); $db=mysql_select_db($dbname,$con) or die("could not select database"); ?> and class.search.php is <?php class search { function breakkey($key) { global $db; $words=explode(' ',$key); return $words; } function searchitem($perm) { global $db; foreach($perm as $k=>$v) { $sql="select * from users" } } } ?>

    Read the article

  • Beginner question: ArrayList can't seem to get it right! Pls help

    - by elementz
    I have been staring at this code all day now, but just can't get it right. ATM I am just pushing codeblocks around without being able to concentrate anymore, with the due time being within almost an hour... So you guys are my last resort here. I am supposed to create a few random balls on a canvas, those balls being stored within an ArrayList (I hope an ArrayList is suitable here: the alternative options to choose from were HashSet and HashMap). Now, whatever I do, I get the differently colored balls at the top of my canvas, but they just get stuck there and refuse to move at all. Apart from that I now get a ConcurrentModificationException, when running the code: java.util.ConcurrentModificationException at java.util.AbstractList$Itr.checkForComodification(AbstractList.java:372) at java.util.AbstractList$Itr.next(AbstractList.java:343) at BallDemo.bounce(BallDemo.java:109) Reading up on that exception, I found out that one can make sure ArrayList is accessed in a threadsafe manner by somehow synchronizing access. But since I have remember fellow students doing without synchronizing, my guess is, that it would actually be the wrong path to go. Maybe you guys could help me get this to work, I at least need those stupid balls to move ;-) /** * Simulate random bouncing balls */ public void bounce(int count) { int ground = 400; // position of the ground line System.out.println(count); myCanvas.setVisible(true); // draw the ground myCanvas.drawLine(50, ground, 550, ground); // Create an ArrayList of type BouncingBalls ArrayList<BouncingBall>balls = new ArrayList<BouncingBall>(); for (int i = 0; i < count; i++){ Random numGen = new Random(); // Creating a random color. Color col = new Color(numGen.nextInt(256), numGen.nextInt(256), numGen.nextInt(256)); // creating a random x-coordinate for the balls int ballXpos = numGen.nextInt(550); BouncingBall bBall = new BouncingBall(ballXpos, 80, 20, col, ground, myCanvas); // adding balls to the ArrayList balls.add(bBall); bBall.draw(); boolean finished = false; } for (BouncingBall bBall : balls){ bBall.move(); } } This would be the original unmodified method we got from our teacher, which only creates two balls: /** * Simulate two bouncing balls */ public void bounce() { int ground = 400; // position of the ground line myCanvas.setVisible(true); myCanvas.drawLine(50, ground, 550, ground); // draw the ground // crate and show the balls BouncingBall ball = new BouncingBall(50, 50, 16, Color.blue, ground, myCanvas); ball.draw(); BouncingBall ball2 = new BouncingBall(70, 80, 20, Color.red, ground, myCanvas); ball2.draw(); // make them bounce boolean finished = false; while(!finished) { myCanvas.wait(50); // small delay ball.move(); ball2.move(); // stop once ball has travelled a certain distance on x axis if(ball.getXPosition() >= 550 && ball2.getXPosition() >= 550) { finished = true; } } ball.erase(); ball2.erase(); } }

    Read the article

  • Retrieving saved checkboxes' name and values from database

    - by sermed
    I have a form with checkboxes, each one has a value. When the registered user select any checkbox the value is incremented (the summation) and then then registred user save his selection of checkbox if he satisfied with the result of summation into database all this work fine ...i want to enable the registred user to view his selection history by retriving and displaying the checkboxes he selected in a page with thier values ... How I can do that? I'm just able to save the selected checkboxes as choice 1, choice 2, for example .. I want to view the selected checkboxes that is saved in database as the appear in the page when the user first select them: for example if the registred user selects these 3 options LEAD DEEP KEEL (1825) FULLY BATTENED MAINSAIL (558) TEAK SIDE DECKS (2889) They will be saved as for example (choice1, choice2, choice3). But if he want to view selected checkboxes the appear exactly as first he selects them: LEAD DEEP KEEL (1825) FULLY BATTENED MAINSAIL (558) TEAK SIDE DECKS (2889) This is my user table: $query="CREATE TABLE User( user_id varchar(20), password varchar(40), user_type varchar(20), firstname varchar(30), lastname varchar(30), street varchar(50), city varchar(50), county varchar(50), post_code varchar(10), country varchar(50), gender varchar(6), dob varchar(15), tel_no varchar(50), vals varchar(50), email varchar(50))"; and the code to inser the options selected to database <?php include("databaseconnection.php"); $str = ''; foreach($_POST as $key => $val) if (strpos($key,'choice') !== false) $str .= $key.','; $query = "INSERT INTO User (vals) VALUES('$str')"; $result=mysql_query($query,$conn); if ($result) { (mysql_error(); } else { echo " done"; } ?> And this is my form: function checkTotal() { document.listForm.total.value = ''; var sum = 0; for (i=0;i <form name="listForm" method="post" action="insert_options.php" > <TABLE cellPadding=3 width=600 border=0> <TBODY> <TR> <TH align=left width="87%" bgColor=#b0b3b4><SPAN class=whiteText>Item</SPAN></TH> <TH align=right width="13%" bgColor=#b0b3b4><SPAN class=whiteText>Select</SPAN></TH></TR> <TR> <TD bgcolor="#9da8af"colSpan=2><SPAN class=normalText><B>General</B></SPAN></TD></TR> <TR> <TD bgcolor="#c4c8ca"><SPAN class=normalText >TEAK SIDE DECKS (2889)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="2889" type="checkbox" onchange="checkTotal()" /></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>LEAD DEEP KEEL (1825)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="1825" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>FULLY BATTENED MAINSAIL (558)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="558" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>HIGH TECH SAILS FOR CONVENTIONAL RIG (1979)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="1979" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>IN MAST REEFING WITH HIGH TECH SAILS (2539)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="2539" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SPlNNAKER GEAR (POLE LINES DECK FITTINGS) (820)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="820" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SPINNAKER POLE VERTICAL STOWAGE SYSTEM (214)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="214" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>GAS ROD KICKER (208)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="208" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SIDE RAIL OPENINGS (BOTH SIDES) (392)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="392" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SPRING CLEATS MIDSHIPS -ALUMIMIUM (148)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="148" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>ELECTRIC ANCHOR WINDLASS (1189)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="1189" type="checkbox" onchange="checkTotal()"> </TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>ANCHOR CHAIN GALVANISED (50m) (202)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="202" type="checkbox" onchange="checkTotal()"> </TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>ANCHOR CHAIN GALVANISED (50m) (1141)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="1141" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgcolor="#9da8af"colSpan=2><SPAN class=normalText><B>NAVIGATION & ELECTRONICS</B></SPAN></TD></TR> <TR> <TD bgcolor="#c4c8ca"><SPAN class=normalText >WIND VANE (STAINLESS STEEL)(41)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="41" type="checkbox" onchange="checkTotal()" /></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>RAYMARINE ST6O LOG & DEPTH (SEPARATE UNITS)(226)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="226" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgcolor="#9da8af"colSpan=2><SPAN class=normalText><B>ENGINES & ELECTRICS</B></SPAN></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SHORE SUPPLY (220V) WITH 3 OUTLETS (EXCLUDJNG SHORE CABLE) (327)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="327" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgColor=#c4c8ca><SPAN class=normalText>3rd BATTERY(14OA/H)(196)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="196" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>24 AMP BATTERY CHARGER (475)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="475" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>2 BLADED FOLDING PROPELLER (UPGRADE)(299)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="299" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgcolor="#9da8af"colSpan=2><SPAN class=normalText><B>BELOW DECKS/DOMESTIC</B></SPAN></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>WARM WATER (FROM ENGINE & 220V)(749)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="749" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>SHOWER IN AFT HEADS WITH PUMPOUT(446)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="446" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>DECK SUCTION DISPOSAL FOR HOLDINGTANK(166)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="166" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>REFRIGERATED COOLBOX (12V)(666)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="666" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>LFS SAFETY PACKAGE (COCKPIT HARNESS POINTS STAINLESS STEEL JACKSTAYS)(208)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="208" type="checkbox" onchange="checkTotal()"></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>UPHOLSTERY UPGRADE IN SALOON (SUEDETYPE)(701)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="701" type="checkbox" onchange="checkTotal()"></TD></TR> <TR> <TD bgcolor="#9da8af"colSpan=2><SPAN class=normalText><B>NAVIGATION ELECTRONICS & ELECTRICS</B></SPAN></TD></TR> <TD bgColor=#c4c8ca><SPAN class=normalText>VHF RADIO AERIAL CABLED TO NAVIGATION AREA(178)</SPAN></TD> <TD align=right bgColor=#c4c8ca><input name="choice" value="178" type="checkbox" onchange="checkTotal()"></TD></TR> </table>

    Read the article

  • OpenVPN Bridge LAN-to-LAN Configuration?

    - by Shad Reese
    I'm trying to configure an OpenVPN bridge LAN-to-LAN setup. Currently, I have the OpenVPN bridge Server/Client setup up running. On the server-side my br-lan interface has tap0, eth0, and wlan0 in the bridge group. On the client-side the br-lan interface has eth0 and wlan0 in the bridge group, the client tap0 is outside of the br-lan group. Currently the two bridge groups are connected via the wlanO interfaces (server-side is the Access Point - AP and the client-side is the wireless client). My goal is to connect the two bridge groups with a wireless VPN pipe. My network configuration: Server: br-lan: 10.4.96.50 Client: br-lan: 10.4.96.75 tap0: 10.4.96.100 <---- issued by the VPN server. Unfortunately, I'm stuck with using a bridge instead of a routed OpenVPN setup. My question is how (if possible) do I add the client tap0 interface to the client bridge group, as to ensure all traffic between the server/client bridge groups is using the VPN pipe? SERVER CONFIG FILE. config openvpn sample_server # Set to 1 to enable this instance: option enable 1 option port 1194 option proto udp option dev tap0 option key /etc/easy-rsa/keys/server.key option dh /etc/easy-rsa/keys/dh1024.pem option ifconfig_pool_persist /tmp/ipp.txt option server_bridge "10.4.96.50 255.255.255.0 10.4.96.100 10.4.96.200" list push "redirect-gateway local def1" list push "dhcp-option DNS 10.4.96.14" option duplicate_cn 1 option comp_lzo 1 option max_clients 100 option log /tmp/openvpn.log option verb 3 CLIENT CONFIG FILE: config 'openvpn' 'sample_client' option 'enable' '1' option 'client' '1' option 'dev' 'tap' option 'proto' 'udp' list 'remote' '10.4.96.50 1194' option 'status' /tmp/openvpn-status.log option 'log' /tmp/openvpn.log option 'ca' '/etc/easy-rsa/keys/ca.crt' option 'cert' '/etc/easy-rsa/keys/client.crt' option 'key' '/etc/easy-rsa/keys/client.key' option 'comp_lzo' '1' option 'verb' '5' Thanks in advance,

    Read the article

  • Bad Blocks Exist in Virtual Device PERC H700 Integrated

    - by neoX
    I have a DELL server with PERC H700 Integrated controller. I've made RAID5 with 12 harddrives and the virtual device is in Optimal state, but I receive such errors under linux: sd 0:2:0:0: [sda] Unhandled error code sd 0:2:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 0:2:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 07 22 50 bd 98 00 00 00 08 00 00 end_request: I/O error, dev sda, sector 30640487832 sd 0:2:0:0: [sda] Unhandled error code sd 0:2:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 0:2:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 07 22 50 bd 98 00 00 00 08 00 00 end_request: I/O error, dev sda, sector 30640487832 sd 0:2:0:0: [sda] Unhandled error code sd 0:2:0:0: [sda] Result: hostbyte=0x07 driverbyte=0x00 sd 0:2:0:0: [sda] CDB: cdb[0]=0x88: 88 00 00 00 00 07 22 50 bc e0 00 00 01 00 00 00 end_request: I/O error, dev sda, sector 30640487648 But all disk are in Firmware state: Online, Spun Up. Also there is not a single ATA read or write error in any disk in the raid (I check them with smartctl -a -d sat+megaraid,N -H /dev/sda). The only strange thing is in the output in megacli: megacli -LDInfo -L0 -a0 ... Bad Blocks Exist: Yes How could there be bad blocks in a Virtual Drive, which is in optimal state and no disk is broken or even with a single error? I tried "Consistency Check", but it finished successfully and the errors are still in dmesg. Could Someone help me to figure it out what is wrong with my raid?

    Read the article

  • How to get the permissions right for /dev/raw1394

    - by Mark0978
    I recently upgraded one of my ubuntu machines to Karmic and I'm having trouble getting the permissions of /dev/raw1394 set to 0666. They only thing this machine is used for is recording audio from a firepod which uses /dev/raw1394 via jackd and there are no other FireWire devices connected, so security around this device is not really an issue. If I run as root, everything works as expected, but I have some folks that run the recorder that I don't want to have root access. However, I can't figure out which lines setup the perms I've tied this: /etc/udev/permissions.d/raw1394.rules:raw1394:root:root:0666 And I have this setup (default install) /lib/udev/rules.d/75-persistent-net-generator.rules:SUBSYSTEMS=="ieee1394", ENV{COMMENT}="Firewire device $attr{host_id})" /lib/udev/rules.d/75-cd-aliases-generator.rules:# the "path" of usb/ieee1394 devices changes frequently, use "id" /lib/udev/rules.d/75-cd-aliases-generator.rules:ACTION=="add", SUBSYSTEM=="block", SUBSYSTEMS=="usb|ieee1394", ENV{ID_CDROM}=="?*", ENV{GENERATED}!="?*", \ /lib/udev/rules.d/60-persistent-storage-tape.rules:KERNEL=="st*[0-9]|nst*[0-9]", ATTRS{ieee1394_id}=="?*", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_BUS}="ieee1394" /lib/udev/rules.d/50-udev-default.rules:# FireWire (deprecated dv1394 and video1394 drivers) /lib/udev/rules.d/50-udev-default.rules:KERNEL=="dv1394-[0-9]*", NAME="dv1394/%n", GROUP="video" /lib/udev/rules.d/50-udev-default.rules:KERNEL=="video1394-[0-9]*", NAME="video1394/%n", GROUP="video" /lib/udev/rules.d/60-persistent-storage.rules:KERNEL=="sd*[!0-9]|sr*", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}" /lib/udev/rules.d/60-persistent-storage.rules:KERNEL=="sd*[0-9]", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}-part%n" And I find these lines in /var/log/syslog Apr 30 09:11:30 record kernel: [ 3.284010] ieee1394: Node added: ID:BUS[0-00:1023] GUID[000a9200c7062266] Apr 30 09:11:30 record kernel: [ 3.284195] ieee1394: Host added: ID:BUS[0-01:1023] GUID[00d0035600a97b9f] Apr 30 09:11:30 record kernel: [ 18.372791] ieee1394: raw1394: /dev/raw1394 device initialized What I can't figure out, is which line actually creates that raw1394 device in the first place. How do you get /dev/raw1394 to have permissions 0666?

    Read the article

  • nginx+mysql5 loadtesting configuration strangeness

    - by genseric
    i am trying to setup a new server running on debian6 and trying to make it work smooth under load. i ve used a wordpress site as a test object, and tried the configurations on http://blitz.io. when i increase the mysql max_connections from 50 to 200 lots of timeouts start to occur. but on 50 , no timeouts and pretty well response times. nginx configuration is fine , i tuned the config so i dont see errors. so i presume it's related to the other configuration options of my.cnf . i read some about options but still cant find what max_connections problem is all about. btw, the server has 16gb of ram and a fine i7 cpu. here is the current my.cnf [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] wait_timeout=60 connect_timeout=10 interactive_timeout=120 user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking bind-address = 127.0.0.1 key_buffer = 384M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 20 myisam-recover = BACKUP max_connections = 50 table_cache = 1024 thread_concurrency = 8 query_cache_limit = 2M query_cache_size = 128M expire_logs_days = 10 max_binlog_size = 100M [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M thanks in advance. i asked this question on SO but it's closed as off topic so i believe this is a SF question.

    Read the article

  • When to use Truecrypt, and when not to?

    - by tm77
    I have about 30 (this number will most likely grow over the next few years to 50 or more) unencrypted laptops that I have been tasked to encrypt (entire drive). These machines will be used off site regularly by my users. These machines are running Windows 7 and XP (about 50/50), but more Windows 7 every month. I have experience with Truecrypt, and have had no issues. It appears to be THE solution for a free solution. My concern with Truecrypt is that my users will have 2 passswords needed to login to their machines. Also, I need to choose to either have 1 password for my organization, or carefully document each machine's password (management nightmare). In my mind, choosing between a managed and a free encryption solution is primarily based on the NUMBER of machines that will be encrypted and supported. Two questions: From a management standpoint, what is the tipping point of users where a managed solution would pay for itself over Truecrypt? What are some good third party solutions? (I will consider Bitlocker, but the price to upgrade Windows 7 licenses is a turn-off) I would love to hear from some admins with experience in supporting encrypted machines in a corporate environment. Many thanks in advance!

    Read the article

  • Rebinding Keys on a Dell Keyboard

    - by Maarx
    I have a Dell Multimedia Keyboard, similar to this one: It has many non-standard keys, like the small circular ones across the top, and the "Multimedia" keys above INSERT/HOME/PAGE_UP. They can be rebound through simple registry entries. Some sample ones are included below: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey] [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\15] "ShellExecute"="C:\\Program Files (x86)\\Mozilla Firefox\\firefox.exe http://mail.google.com/mail/#inbox" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\16] "Association"=".cda" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\17] "ShellExecute"="C:\\Windows\\System32\\SnippingTool.exe" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\18] "ShellExecute"="calc.exe" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\7] "Association"="http" I've rebound the "MAIL" key to, instead of booting Outlook, to booting Firefox directed at my G-Mail account. I've rebound the button that would normally open "MY COMPUTER" to instead boot the Windows 7 "Snipping Tool", something I find very useful. Now, I'm looking to do some other things that I don't already know how to do. Note that answering this question doesn't necessarily require any knowledge about the keyboard or rebinding the keys: I can add, for any given key, a "ShellExecute" entry, and it will simply execute the following command as if it was typed at a Command Prompt. (I'm aware I dumbed that down rather significantly, but bear with me. I'm not really a Windows guy myself.) I use the volume knob for it's intended purpose, to change volume. I would like to change, however, a different key, to "reset" the Windows volume level back to exactly 50%, or, as it refers to it, "50", on it's 0-100 scale. I'm looking for the "program" (what I would type at a command prompt? these are still just Sys32 programs in the PATH, aren't they?) that, I imagine, would take arguments, to change Sound/Volume settings under Windows 7. Perhaps, for clarification, something that might take the form "C: SetVolume -slevel 50" or something.

    Read the article

  • Better way to design a database

    - by cMinor
    I have a conceptual problem and I would like to get your ideas on how I'll be able to do what I am aiming. My goal is to create a database with information of persons who work at a place depending on their profession and skills,and keep control of salary and projects (how much would cost summing all the hours of work) I have 3 categories which can have subcategories: Outsourcing Technician welder turner assistant Administrative supervisor manager So each person has its information and the projects they are working on, also one person may do several jobs... I was thinking about having 5 tables (EMPLOYEE, SKILLS, PROYECTS, SALARY, PROFESSION) but I guess there is a better way of doing this. create table Employee ( PRIMARY KEY [Person_ID] int(10), [Name] varchar(30), [sex] varchar(10), [address] varchar(10), [profession] varchar(10), [Skills_ID] int(10), [Proyect_ID] int(10), [Salary_ID] int(10), [Salary] float ) create table Skills ( PRIMARY KEY [Skills_ID] int(10), FOREIGN KEY [Skills_name] varchar(10) REFERENCES Employee(Person_ID), [Skills_pay] float(10), [Comments] varchar(50) ) create table Proyects ( PRIMARY KEY [Proyect_ID] int(10), FOREIGN KEY [Skills_name] varchar(10) REFERENCES Employee(Person_ID) [Proyect_name] varchar(10), [working_Hours] float(10), [Comments] varchar(50) ) create table Salary ( PRIMARY KEY [Salary_ID] int(10), FOREIGN KEY [Skills_name] varchar(10) REFERENCES Employee(Person_ID) [Proyect_name] varchar(10), [working_Hours] float(10), [Comments] varchar(50) ) So to get the total amount of the cost of a project I would just sum the working hours of each employee envolved and sum some extra costs in an aggregate query. Is there a way to do this in a more efficient way? What to add or delete of this small model? I guess I am missing something in the salary - maybe I need another table for that?

    Read the article

  • Interpreting and using the Asterisk "timing test" command

    - by zigg
    Timing is very important for certain kinds of applications in Asterisk. If DAHDI is the timing source, the dahdi_test command can be used to check the timing provided by the DAHDI kernel module. If dahdi_test returns exclusively measurements above 99.975%, the DAHDI timing source is generally considered good. Since Asterisk 1.6, new timing sources have become available, such as pthread and timerfd. The accuracy of these timing sources seems to be measurable with the Asterisk CLI timing test command: localhost*CLI> timing test Attempting to test a timer with 50 ticks per second. Using the 'timerfd' timing module for this test. It has been 1000 milliseconds, and we got 50 timer ticks My concern is that timing 50 ticks seems to be a considerably less stressful test than dahdi_test's 8192 samples in 8000 ms, particularly since just about every system I've tried it on, virtual or otherwise, can handle it. I can ask timing test to ramp it up to what I think are dahdi_test's standards: localhost*CLI> timing test 1024 Attempting to test a timer with 1024 ticks per second. Using the 'timerfd' timing module for this test. It has been 1000 milliseconds, and we got 1024 timer ticks This will indeed break down a bit depending on the system I'm using, usually with a decrease in timer ticks. But I'm not sure whether this is useful to stress it to this level. Is there authoritative guidance on using and interpreting the timing test command to insure that a given Asterisk system has a timing source that will work well?

    Read the article

  • Why doesn't the Windows 7 volume mixer remember per-application levels for all applications?

    - by mdives
    If I have the device's master level set to 50, and then lower an application level to 25; Once I close that application and reopen it, the volume levels should persist. The master level should remain at 50 and the application's at 25. This does happen for most applications. However, for one in particular, Napster, it does not. I subscribe to Napster's streaming service. I use the Napster desktop application to connect to that service. Every time that I open the Napster app, I have to adjust the application's volume level down in the volume mixer. When I open the app again after closing it, I have to do the same thing, the volume mixer is not remembering the set level. In fact. The level is reset back to 50, the same level as the device's master level. Has anyone else experienced this, with Napster or any other application? Is there a solution or is this a known issue?

    Read the article

  • DNS issue on Fedora 12? wget wordpress.org fails where wget www.google.com works

    - by Tom Auger
    I'm administering a Fedora 12 box, but am quite new to networking specifics. Recently one of our WordPress apps hosted on our server has stopped being able to perform its auto-update or auto-download of plugins. Investigating further, I have tried the following: $ wget wordpress.org --2010-12-17 11:26:50-- http://wordpress.org/ Resolving wordpress.org... failed: Temporary failure in name resolution. wget: unable to resolve host address âwordpress.orgâ Whereas: $ wget www.google.com --2010-12-17 11:27:26-- http://www.google.com/ Resolving www.google.com... 74.125.226.82, 74.125.226.84, 74.125.226.80, ... Connecting to www.google.com|74.125.226.82|:80... connected. HTTP request sent, awaiting response... 302 Found Location: http://www.google.ca/ [following] --2010-12-17 11:27:26-- http://www.google.ca/ Resolving www.google.ca... 173.194.32.104 Connecting to www.google.ca|173.194.32.104|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: âindex.html.4â [ <=> ] 9,079 --.-K/s in 0.02s 2010-12-17 11:27:26 (462 KB/s) - âindex.html.4â Interestingly: $ ping wordpress.org PING wordpress.org (72.233.56.138) 56(84) bytes of data. 64 bytes from wordpress.org (72.233.56.138): icmp_seq=1 ttl=50 time=81.5 ms 64 bytes from wordpress.org (72.233.56.138): icmp_seq=2 ttl=50 time=67.3 ms ^C --- wordpress.org ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1783ms rtt min/avg/max/mdev = 67.361/74.448/81.536/7.092 ms and $ nslookup wordpress.org Server: 192.168.2.1 Address: 192.168.2.1#53 Non-authoritative answer: Name: wordpress.org Address: 72.233.56.138 Name: wordpress.org Address: 72.233.56.139 nscd has been stopped and flushed. iptables appear to be clean. At this point I have exhausted my limited abilities to diagnose the issue. Can anyone suggest a resolution path?

    Read the article

  • More than 10k connections on linux vps

    - by Sash_007
    my question what is causing this and how to check? we use url masking script is the website..is it causing this?please help We could noticed that you are abusing our network, as you have made more than 10k connections in our node due to this our node became unstable and all of our customer faced down time because of your VPS. Please find the log details below for your reference. ============================== 593 src=199.231.227.56 dst=58.2.236.196 465 src=199.231.227.56 dst=192.223.243.6 396 src=199.231.227.56 dst=58.2.238.191 217 src=199.231.227.56 dst=58.2.236.197 161 src=199.231.227.56 dst=20.139.83.50 145 src=199.231.227.56 dst=192.223.163.6 136 src=199.231.227.56 dst=125.21.230.68 134 src=199.231.227.56 dst=125.21.230.132 131 src=199.231.227.56 dst=20.139.67.50 117 src=199.231.227.56 dst=110.234.29.210 112 src=199.231.227.56 dst=65.52.0.51 104 src=199.231.227.56 dst=202.46.23.55 100 src=199.231.227.56 dst=202.3.120.4 94 src=199.231.227.56 dst=117.198.39.22 69 src=203.197.253.62 dst=199.231.227.56 62 src=14.194.248.225 dst=199.231.227.56 53 src=199.231.227.56 dst=192.223.136.5 52 src=49.248.11.195 dst=199.231.227.56 51 src=199.231.227.56 dst=117.198.38.15 50 src=199.231.227.56 dst=192.71.175.2 47 src=199.231.227.56 dst=61.16.189.76 45 src=199.231.227.56 dst=122.177.222.17 43 src=199.231.227.56 dst=115.242.89.40 42 src=199.231.227.56 dst=103.22.237.215 41 src=125.16.9.2 dst=199.231.227.56 39 src=199.231.227.56 dst=117.198.35.90 38 src=199.231.227.56 dst=203.91.201.54 38 src=199.231.227.56 dst=14.139.241.89 38 src=199.231.227.56 dst=111.93.85.82 37 src=199.231.227.56 dst=65.52.0.56 Note: 1st column indicates the total number of connections to a particular IP. You have totally made more than 10k connections.

    Read the article

  • What characters are illegal in Cisco IOS username secret passwords?

    - by Alain O'Dea
    I am using username secret to add users with encrypted passwords to our switches and firewall. I have been battling with the same switches and firewall for a couple of hours trying to get securely generated hard passwords for all admins. Sometimes, the passwords would go into config, but wouldn't work for login. According to the documentation for enable secret a password must not begin with a number and ? has to be entered as Ctrl-V then ? to escape it. I followed that and still got passwords I could not use sometimes. There was no error when I ran username, but the password would be rejected on login by some, but not all of the switches. They are all WS-C2960-48PST-L. The passwords it didn't like contained back ticks "`" (that character under tilde ~ under Esc). The "misbehaving" switches are running: Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(50)SE5, RELEASE SOFTWARE (fc1) The "working" switches are running: Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(46)SE, RELEASE SOFTWARE (fc2). The "misbehaving" switches are running a newer IOS, so this suggests a regression introduced somewhere between 12.2(46)SE and 12.2(50)SE5. I was unable to find any evidence of this being intentional in the release notes for 12.2(50)SE. I would like to avoid this next time the passwords are changed :) What characters are illegal in Cisco IOS username secret passwords? Thank you for your help :)

    Read the article

  • What kind of server configuration is best for a chatting app? [closed]

    - by mohabitar
    I'm just now starting to go deeper into the world of cloud hosting and databases, and am getting overwhelmed by how deep this information goes. It's all a little too much to consume in a short amount of time. I get a lot of pricing information, but I'm unable to determine what that means to me. I'm making what you might compare to an email app. Users can send messages to one another. I just don't understand, out of the several options, what would be ideal for an app like this, where users would be constantly sending and receiving text data. With Amazon DynamoDB, I have to specify a pre-defined throughput with number of reads and writes per second. Sure I can just type 50, but I'm not exactly sure what 50 writes per second represents. I'm trying to determine what would be the most cost efficient solution, and I want to know what a throughput of 50 reads/writes/second compares to. Is that a high number? What is a good throughput number for a message sending app with say 50,000 daily users? I'm just providing specific numbers so I can understand what these throughput numbers represent. 100 transactions/second to me seems like a small number since I'm not familiar with this stuff, so I'm just looking to bring everything in context. What would 100 read/write/second be useful for? Are there any average example values available? And I'm not sure what each service is good for. For a message sending app, is there any reason I'd want to choose say Amazon DynamoDB over Google App Engine? Any insight would be greatly appreciated.

    Read the article

  • linux automatic change permissions in resolv.file

    - by rikr
    In various linux servers I see how the permissions of the /etc/resolv.conf file change automatically. In state normal: -r--r--r-- 1 root root 103 Jul 4 11:50 resolv.conf In changed state: -r--r----- 1 root root 103 Jul 4 11:50 resolv.conf I installed auditd for monitoring it, and these are the two entries between the change: type=PATH msg=audit(07/04/2012 12:20:02.719:303) : item=0 name=/etc/resolv.conf inode=137102 dev=fe:00 mode=file,644 ouid=root ogid=root rdev=00:00 type=CWD msg=audit(07/04/2012 12:20:02.719:303) : cwd=/ type=SYSCALL msg=audit(07/04/2012 12:20:02.719:303) : arch=x86_64 syscall=open success=yes exit=3 a0=7feeb1405dec a1=0 a2=1b6 a3=0 items=1 ppid=1585 pid=3445 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=(none) ses=4294967295 comm=hostid exe=/usr/bin/hostid key=(null) type=PATH msg=audit(07/04/2012 12:50:03.727:304) : item=0 name=/etc/resolv.conf inode=137102 dev=fe:00 mode=file,440 ouid=root ogid=root rdev=00:00 type=CWD msg=audit(07/04/2012 12:50:03.727:304) : cwd=/ type=SYSCALL msg=audit(07/04/2012 12:50:03.727:304) : arch=x86_64 syscall=open success=yes exit=3 a0=7f2bcf7abdec a1=0 a2=1b6 a3=0 items=1 ppid=1585 pid=3610 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=(none) ses=4294967295 comm=hostid exe=/usr/bin/hostid key=(null) any ideas?

    Read the article

  • What method of MySQL mirroring should I use for this?

    - by user45745
    I'm running an web application hosting service (basically hosting forums for free), and I have two remote servers at my disposal. The code for the application is stored on both servers and isn't a problem, but I'm wondering how to deal with the databases. When someone goes onto a site *.example-host.com, they are sent to one of the two servers and both must be capable of loading the forums from a database. The database must also have write access, for when new members register or post topics etc. The main requirement is speed, but uptime is also important (if a server goes out, the site should still work). I have a few options, but I'm inexperienced and not sure which to go with: 1) [PHP] Split the forum records 50:50 between the two servers. If a server does not have the record for a forum requested, it can request it from the other by remote MySQL and load it. This idea sounded okay, until I realised that 50% of the time, users would be waiting significantly longer for pages to load. I also realised that if one of the servers went down, half the forums would be inaccessible and registrations would have to be disabled. 2) [MySQL] Dual master replication. This would attempt to mirror the two databases and sounds perfect, but I've heard that it can be very problematic. I don't know how fast this is. 3) [MySQL] Use a standard replication, distribute read only queries on both nodes and read/write queries to the master. This sounds like a good option, but again, I'm not sure on speed. I also don't know what would happen if the master server went down. If you have any other suggestions, please post them :)

    Read the article

  • Silverlight 4.0 HyperlinkButton

    - by xscape
    Any workaround for this code? <HyperlinkButton NavigateUri="/../HTM/HTMLPage1.htm" TargetName="_blank" Click="Button_Click"> <Image Source="{Binding ImageDisplayed}" Height="50" Width="50" Margin="1"> </Image> </HyperlinkButton> When I click on the button its has an error, "cannot find...."

    Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >