Search Results

Search found 1506 results on 61 pages for 'replacement'.

Page 30/61 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

  • Proliant server will not accept new hard disks in RAID 1+0?

    - by Leigh
    I have a HP ProLiant DL380 G5, I have two logical drives configured with RAID. I have one logical drive RAID 1+0 with two 72 gb 10k sas 1 port spare no 376597-001. I had one hard disk fail and ordered a replacement. The configuration utility showed error and would not rebuild the RAID. I presumed a hard disk fault and ordered a replacement again. In the mean time I put the original failed disk back in the server and this started rebuilding. Currently shows ok status however in the log I can see hardware errors. The new disk has come and I again have the same problem of not accepting the hard disk. I have updated the P400 controller with the latest firmware 7.24 , but still no luck. The only difference I can see is the original drive has firmware 0103 (same as the RAID drive) and the new one has HPD2. Any advice would be appreciated. Thanks in advance Logs from server ctrl all show config Smart Array P400 in Slot 1 (sn: PAFGK0P9VWO0UQ) array A (SAS, Unused Space: 0 MB) logicaldrive 1 (68.5 GB, RAID 1, Interim Recovery Mode) physicaldrive 2I:1:1 (port 2I:box 1:bay 1, SAS, 73.5 GB, OK) physicaldrive 2I:1:2 (port 2I:box 1:bay 2, SAS, 72 GB, Failed array B (SAS, Unused Space: 0 MB) logicaldrive 2 (558.7 GB, RAID 5, OK) physicaldrive 1I:1:5 (port 1I:box 1:bay 5, SAS, 300 GB, OK) physicaldrive 2I:1:3 (port 2I:box 1:bay 3, SAS, 300 GB, OK) physicaldrive 2I:1:4 (port 2I:box 1:bay 4, SAS, 300 GB, OK) ctrl all show config detail Smart Array P400 in Slot 1 Bus Interface: PCI Slot: 1 Serial Number: PAFGK0P9VWO0UQ Cache Serial Number: PA82C0J9VWL8I7 RAID 6 (ADG) Status: Disabled Controller Status: OK Hardware Revision: E Firmware Version: 7.24 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Status Details: A cache error was detected. Run more information. Cache Ratio: 100% Read / 0% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Battery/Capacitor Count: 0 SATA NCQ Supported: True Array: A Interface Type: SAS Unused Space: 0 MB Status: Failed Physical Drive Array Type: Data One of the drives on this array have failed or has Logical Drive: 1 Size: 68.5 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 17594 Strip Size: 128 KB Full Stripe Size: 128 KB Status: Interim Recovery Mode Caching: Enabled Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive0 Mount Points: C:\ 68.5 GB Logical Drive Label: A0100539PAFGK0P9VWO0UQ0E93 Mirror Group 0: physicaldrive 2I:1:2 (port 2I:box 1:bay 2, S Mirror Group 1: physicaldrive 2I:1:1 (port 2I:box 1:bay 1, S Drive Type: Data physicaldrive 2I:1:1 Port: 2I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 73.5 GB Rotational Speed: 10000 Firmware Revision: 0103 Serial Number: B379P8C006RK Model: HP DG072A9B7 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:2 Port: 2I Box: 1 Bay: 2 Status: Failed Drive Type: Data Drive Interface Type: SAS Size: 72 GB Rotational Speed: 15000 Firmware Revision: HPD9 Serial Number: D5A1PCA04SL01244 Model: HP EH0072FARUA PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data Logical Drive: 2 Size: 558.7 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Co Unique Identifier: 600508B10010503956574F305551 Disk Name: \\.\PhysicalDrive1 Mount Points: E:\ 558.7 GB Logical Drive Label: AF14FD12PAFGK0P9VWO0UQD007 Drive Type: Data physicaldrive 1I:1:5 Port: 1I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE07QH300009923X1X3 Model: HP DG0300BALVP Current Temperature (C): 32 Maximum Temperature (C): 45 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:3 Port: 2I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE0AHVH00009924P8F3 Model: HP DG0300BALVP Current Temperature (C): 34 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:4 Port: 2I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 300 GB Rotational Speed: 10000 Firmware Revision: HPD4 Serial Number: 3SE08NAK00009924KWD6 Model: HP DG0300BALVP Current Temperature (C): 35 Maximum Temperature (C): 47 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown

    Read the article

  • Replacing jQuery.live() with jQuery.on()

    - by Rick Strahl
    jQuery 1.9 and 1.10 have introduced a host of changes, but for the most part these changes are mostly transparent to existing application usage of jQuery. After spending some time last week with a few of my projects and going through them with a specific eye for jQuery failures I found that for the most part there wasn't a big issue. The vast majority of code continues to run just fine with either 1.9 or 1.10 (which are supposed to be in sync but with 1.10 removing support for legacy Internet Explorer pre-9.0 versions). However, one particular change in the new versions has caused me quite a bit of update trouble, is the removal of the jQuery.live() function. This is my own fault I suppose - .live() has been deprecated for a while, but with 1.9 and later it was finally removed altogether from jQuery. In the past I had quite a bit of jQuery code that used .live() and it's one of the things that's holding back my upgrade process, although I'm slowly cleaning up my code and switching to the .on() function as the replacement. jQuery.live() jQuery.live() was introduced a long time ago to simplify handling events on matched elements that exist currently on the document and those that are are added in the future and also match the selector. jQuery uses event bubbling, special event binding, plus some magic using meta data attached to a parent level element to check and see if the original target event element matches the selected selected elements (for more info see Elijah Manor's comment below). An Example Assume a list of items like the following in HTML for example and further assume that the items in this list can be appended to at a later point. In this app there's a smallish initial list that loads to start, and as the user scrolls towards the end of the initial small list more items are loaded dynamically and added to the list.<div id="PostItemContainer" class="scrollbox"> <div class="postitem" data-id="4z6qhomm"> <div class="post-icon"></div> <div class="postitemheader"><a href="show/4z6qhomm" target="Content">1999 Buick Century For Sale!</a></div> <div class="postitemprice rightalign">$ 3,500 O.B.O.</div> <div class="smalltext leftalign">Jun. 07 @ 1:06am</div> <div class="post-byline">- Vehicles - Automobiles</div> </div> <div class="postitem" data-id="2jtvuu17"> <div class="postitemheader"><a href="show/2jtvuu17" target="Content">Toyota VAN 1987</a></div> <div class="postitemprice rightalign">$950</div> <div class="smalltext leftalign">Jun. 07 @ 12:29am</div> <div class="post-byline">- Vehicles - Automobiles</div> </div> … </div> With the jQuery.live() function you could easily select elements and hook up a click handler like this:$(".postitem").live("click", function() {...}); Simple and perfectly readable. The behavior of the .live handler generally was the same as the corresponding simple event handlers like .click(), except that you have to explicitly name the event instead of using one of the methods. Re-writing with jQuery.on() With .live() removed in 1.9 and later we have to re-write .live() code above with an alternative. The jQuery documentation points you at the .on() or .delegate() functions to update your code. jQuery.on() is a more generic event handler function, and it's what jQuery uses internally to map the high level event functions like .click(),.change() etc. that jQuery exposes. Using jQuery.on() however is not a one to one replacement of the .live() function. While .on() can handle events directly and use the same syntax as .live() did, you'll find if you simply switch out .live() with .on() that events on not-yet existing elements will not fire. IOW, the key feature of .live() is not working. You can use .on() to get the desired effect however, but you have to change the syntax to explicitly handle the event you're interested in on the container and then provide a filter selector to specify which elements you are actually interested in for handling the event for. Sounds more complicated than it is and it's easier to see with an example. For the list above hooking .postitem clicks, using jQuery.on() looks like this:$("#PostItemContainer").on("click", ".postitem", function() {...}); You specify a container that can handle the .click event and then provide a filter selector to find the child elements that trigger the  the actual event. So here #PostItemContainer contains many .postitems, whose click events I want to handle. Any container will do including document, but I tend to use the container closest to the elements I actually want to handle the events on to minimize the event bubbling that occurs to capture the event. With this code I get the same behavior as with .live() and now as new .postitem elements are added the click events are always available. Sweet. Here's the full event signature for the .on() function: .on( events [, selector ] [, data ], handler(eventObject) ) Note that the selector is optional - if you omit it you essentially create a simple event handler that handles the event directly on the selected object. The filter/child selector required if you want life-like - uh, .live() like behavior to happen. While it's a bit more verbose than what .live() did, .on() provides the same functionality by being more explicit on what your parent container for trapping events is. .on() is good Practice even for ordinary static Element Lists As a side note, it's a good practice to use jQuery.on() or jQuery.delegate() for events in most cases anyway, using this 'container event trapping' syntax. That's because rather than requiring lots of event handlers on each of the child elements (.postitem in the sample above), there's just one event handler on the container, and only when clicked does jQuery drill down to find the matching filter element and tries to match it to the originating element. In the early days of jQuery I used manually build handlers that did this and manually drilled from the event object into the originalTarget to determine if it's a matching element. With later versions of jQuery the various event functions in jQuery essentially provide this functionality out of the box with functions like .on() and .delegate(). All of this is nothing new, but I thought I'd write this up because I have on a few occasions forgotten what exactly was needed to replace the many .live() function calls that litter my code - especially older code. This will be a nice reminder next time I have a memory blank on this topic. And maybe along the way I've helped one or two of you as well to clean up your .live() code…© Rick Strahl, West Wind Technologies, 2005-2013Posted in jQuery   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Blogging tips for SQL Server professionals

    - by jamiet
    For some time now I have been intending to put some material together relating my blogging experiences since I began blogging in 2004 and that led to me submitting a session for SQLBits recently where I intended to do just that. That didn’t get enough votes to allow me to present however so instead I resolved to write a blog post about it and Simon Sabin’s recent post Blogging – how do you do it? has prompted me to get around to completing it. So, here I present a compendium of tips that I’ve picked up from authoring a fair few blog posts over the past 6 years. Feedburner Feedburner.com is a service that can consume your blog’s default RSS feed and provide another, replacement, feed that has exactly the same content. You can then supply that replacement feed on your blog site for other people to consume in their RSS readers. Why would you want to do this? Well, two reasons actually: It makes your blog portable. If you ever want to move your blog to a different URL you don’t have to tell your subscribers to move to a different feed. The feedburner feed is a pointer to your blog content rather than being a copy of it. Feedburner will collect stats telling you how many people are subscribed to your feed, which RSS readers they use, stuff like that. Here’s a sample screenshot for http://sqlblog.com/blogs/jamie_thomson/: It also tells you what your most viewed posts are: Web stats like these are notoriously inaccurate but then again the method of measurement here is not important, what IS important is that it gives you a trustworthy ranking of your blog posts and (in my opinion) knowing which are your most popular posts is more important than knowing exactly how many views each post has had. This is just the tip of the iceberg of what Feedburner provides and I recommend every new blogger to try it! Monitor subscribers using Google Reader If for some reason Feedburner is not to your taste or (more likely) you already have an established RSS feed that you do not want to change then Google provide another way in which you can monitor your readership in the shape of their online RSS reader, Google Reader. It provides, for every RSS feed, a collection of stats including the number of Google Reader users that have subscribed to that RSS feed. This is really valuable information and in fact I have been recording this statistic for mine and a number of other blogs for a few years now and as such I can produce the following chart that indicates how readership is trending for those blogs over time: [Good news for my fellow SQLBlog bloggers.] As Stephen Few readily points out, its not the numbers that are important but the trend. Search Engine Optimisation (SEO) SEO (or “How do I get my blog to show up in Google”) is a massive area of expertise which I don’t want (and am unable) to cover in much detail here but there are some simple rules of thumb that will help: Tags – If your blog engine offers the ability to add tags to your blog post, use them. Invariably those tags go into the meta section of the page HTML and search engines lap that stuff up. For example, from my recent post Microsoft publish Visual Studio 2010 Database Project Guidance: Title – Search engines take notice of web page titles as well so make them specific and descriptive (e.g. “Configuring dtsConfig connection strings”) rather than esoteric and meaningless in a vain attempt to be humorous (e.g. “Last night a DJ saved my ETL batch”)! Title(2) – Make your title even more search engine friendly by mentioning high level subject areas, not dissimilar to Twitter hashtags. For example, if you look at all of my posts related to SSIS you will notice that nearly all contain the word “SSIS” in the title even if I had to shoehorn it in there by putting it in square brackets or similar. Another tip, if you ARE putting words into your titles in this artificial manner then put them at the end so that they’re not that prominent in search engine results; they’re there for the search engines to consume, not for human beings. Images – Always add titles and alternate text (ALT attribute) to images in your blog post. If you use Windows 7 or Windows Vista then you can use Live Writer (which Simon recommended) makes this easy for you. Headings – If you want to highlight section headings use heading tags (e.g. <H1>, <H2>, <H3> etc…) rather than just formatting the text appropriately – again, Live makes this easy. These tags give your blog posts structure that is understood by search engines and RSS readers alike. (I believe it makes them more amenable to CSS as well – though that’s not something I know too much about). If you check the HTML source for the blog post you’re reading right now you’ll be able to scan through and see where I have used heading tags. Microsoft provide a free tool called the SEO Toolkit that will analyse your blog site (for free) and tell you what things you should change to improve SEO. Go read more and download for free at Search Engine Optimization Toolkit. Did I mention that it was free? Miscellaneous Tips If you are including code in your blog post then ensure it is formatted correctly. Use SQL Server Central’s T-SQL prettifier for formatting T-SQL code. Use images and videos. Personally speaking there’s nothing I like less when reading a blog than paragraph after paragraph of text. Images make your blog more appealing which means people are more likely to read what you have written. Be original. Don’t plagiarise other people’s content and don’t simply rewrite the contents of Books Online. Every time you publish a blog post tweet a link to it. Include hashtags in your tweet that are more likely to grab people’s attention. That’s probably enough for now - I hope this blog post proves useful to someone out there. If you would appreciate a related session at a forthcoming SQLBits conference then please let me know. This will likely be my last blog post for 2010 so I would like to take this opportunity to thank everyone that has commented on, linked to or read any of my blog posts in that time. 2011 is shaping up to be a very interesting for SQL Server observers with the impending release of SQL Server code-named Denali and I promise I’ll have lots more content on that as the year progresses. Happy New Year. @Jamiet

    Read the article

  • UppercuT &ndash; Custom Extensions Now With PowerShell and Ruby

    - by Robz / Fervent Coder
    Arguably, one of the most powerful features of UppercuT (UC) is the ability to extend any step of the build process with a pre, post, or replace hook. This customization is done in a separate location from the build so you can upgrade without wondering if you broke the build. There is a hook before each step of the build has run. There is a hook after. And back to power again, there is a replacement hook. If you don’t like what the step is doing and/or you want to replace it’s entire functionality, you just drop a custom replacement extension and UppercuT will perform the custom step instead. Up until recently all custom hooks had to be written in NAnt. Now they are a little sweeter because you no longer need to use NAnt to extend UC if you don’t want to. You can use PowerShell. Or Ruby.   Let that sink in for a moment. You don’t have to even need to interact with NAnt at all now. Extension Points On the wiki, all of the extension points are shown. The basic idea is that you would put whatever customization you are doing in a separate folder named build.custom. Each step Let’s take a look at all we can customize: The start point is default.build. It calls build.custom/default.pre.build if it exists, then it runs build/default.build (normal tasks) OR build.custom/default.replace.build if it exists, and finally build.custom/default.post.build if it exists. Every step below runs with the same extension points but changes on the file name it is looking for. NOTE: If you include default.replace.build, nothing else will run because everything is called from default.build.    * policyChecks.step    * versionBuilder.step NOTE: If you include build.custom/versionBuilder.replace.step, the items below will not run.      - svn.step, tfs.step, or git.step (the custom tasks for these need to go in build.custom/versioners)    * generateBuildInfo.step    * compile.step    * environmentBuilder.step    * analyze.step NOTE: If you include build.custom/analyze.replace.step, the items below will not run.      - test.step (the custom tasks for this need to go in build.custom/analyzers) NOTE: If you include build.custom/analyzers/test.replace.step, the items below will not run.        + mbunit2.step, gallio.step, or nunit.step (the custom tasks for these need to go in build.custom/analyzers)      - ncover.step (the custom tasks for this need to go in build.custom/analyzers)      - ndepend.step (the custom tasks for this need to go in build.custom/analyzers)      - moma.step (the custom tasks for this need to go in build.custom/analyzers)    * package.step NOTE: If you include build.custom/package.replace.step, the items below will not run.      - deploymentBuilder.step Customize UppercuT Builds With PowerShell UppercuT can now be extended with PowerShell (PS). To customize any extension point with PS, just add .ps1 to the end of the file name and write your custom tasks in PowerShell. If you are not signing your scripts you will need to change a setting in the UppercuT.config file. This does impose a security risk, because this allows PS to now run any PS script. This setting stays that way on ANY machine that runs the build until manually changed by someone. I’m not responsible if you mess up your machine or anyone else’s by doing this. You’ve been warned. Now that you are fully aware of any security holes you may open and are okay with that, let’s move on. Let’s create a file called default.replace.build.ps1 in the build.custom folder. Open that file in notepad and let’s add this to it: write-host "hello - I'm a custom task written in Powershell!" Now, let’s run build.bat. You could get some PSake action going here. I won’t dive into that in this post though. Customize UppercuT Builds With Ruby If you want to customize any extension point with Ruby, just add .rb to the end of the file name and write your custom tasks in Ruby.  Let’s write a custom ruby task for UC. If you were thinking it would be the same as the one we just wrote for PS, you’d be right! In the build.custom folder, lets create a file called default.replace.build.rb. Open that file in notepad and let’s put this in there: puts "I'm a custom ruby task!" Now, let’s run build.bat again. That’s chunky bacon. UppercuT and Albacore.NET Just for fun, I wanted to see if I could replace the compile.step with a Rake task. Not just any rake task, Albacore’s msbuild task. Albacore is a suite of rake tasks brought about by Derick Bailey to make building .NET with Rake easier. It has quite a bit of support with developers that are using Rake to build code. In my build.custom folder, I drop a compile.replace.step.rb. I also put in a separate file that will contain my Albacore rake task and I call that compile.rb. What are the contents of compile.replace.step.rb? rake = 'rake' arguments= '-f ' + Dir.pwd + '/../build.custom/compile.rb' #puts "Calling #{rake} " + arguments system("#{rake} " + arguments) Since the custom extensions call ruby, we have to shell back out and call rake. That’s what we are doing here. We also realize that ruby is called from the build folder, so we need to back out and dive into the build.custom folder to find the file that is technically next to us. What are the contents of compile.rb? require 'rubygems' require 'fileutils' require 'albacore' task :default => [:compile] puts "Using Ruby to compile UppercuT with Albacore Tasks" desc 'Compile the source' msbuild :compile do |msb| msb.properties = { :configuration => :Release, :outputpath => '../../build_output/UppercuT' } msb.targets [:clean, :build] msb.verbosity = "quiet" msb.path_to_command = 'c:/Windows/Microsoft.NET/Framework/v3.5/MSBuild.exe' msb.solution = '../uppercut.sln' end We are using the msbuild task here. We change the output path to the build_output/UppercuT folder. The output path has “../../” because this is based on every project. We could grab the current directory and then point the task specifically to a folder if we have projects that are at different levels. We want the verbosity to be quiet so we set that as well. So what kind of output do you get for this? Let’s run build.bat custom_tasks_replace:      [echo] Running custom tasks instead of normal tasks if C:\code\uppercut\build\..\build.custom\compile.replace.step exists.      [exec] (in C:/code/uppercut/build)      [exec] Using Ruby to compile UppercuT with Albacore Tasks      [exec] Microsoft (R) Build Engine Version 3.5.30729.4926      [exec] [Microsoft .NET Framework, Version 2.0.50727.4927]      [exec] Copyright (C) Microsoft Corporation 2007. All rights reserved. If you think this is awesome, you’d be right!   With this knowledge you shall build.

    Read the article

  • CodePlex Daily Summary for Sunday, May 23, 2010

    CodePlex Daily Summary for Sunday, May 23, 2010New ProjectsA2Command: Apple 2 port of CBM-Command (http://cbmcommand.codeplex.com)AgUnit: AgUnit is a plugin for Jetbrains ReSharper (R#) that allows you to run and debug Silverlight unit tests from within Visual Studio.BSonPosh Powershell Module: A collection of useful Powershell functions I have written and collected over the years. It is a Powershell v2 Module composed of mostly scripts.DB Restriker: Simple tool for lookup, parsing, searching some standard databases using wildcards and pattern recognition.Entity Framework Repository & Unit of Work Template: T4 Template for Entity Framework 4 for creating a data access layer using the repository and unit of work patterns. Designed to work well with dep...Fiction Catalog: A catalog project designed to store information about fictional literature.Giving a Presentation: Useful for people doing presentations, this application hides desktop icons, disables screensaver, closes chosen programs when presentation starts,...glueless: Glueless is a local message bus which allows architect to design highly decoupled systems and applications. Glueless is a step beyond dependency i...HtmlCodeIt: Take any code and format it so that it can be viewed properly on a web browser, blog post or website.just testproject :): just have a test!KanbanTaskboard: The aim of the project is to design and implement a functional prototype for visualizing and operating a multi-platform virtual "Kanban Taskboard”Life System: Life SystemOaSys Project: Project Oasys is a project that aims to help solve desertification. Scoring of pingPong Game: Scoring of pingPong GameSilverlight Web Comic: The Silverlight Web Comic makes easier for the people create your own comic with your own pictures o drawings, and add the globes of text like the ...TickSharp: C# Wrapper for http://TickSpot.com RESTful API.Traductor: El Traductor es una aplicación de escritorio para traducción de frases entre distintos idiomas basada en la plataforma Silverlight Out Of Browser y...WatchersNET.SkinObjects.ModulActionsMenu: Displays the Module Actions Menu as a Unsorted CSS Menu.xxfd1r4w96: testingNew ReleasesAgUnit: AgUnit 0.1: Initial release of AgUnit. Copy the extracted files from AgUnit-0.1.zip into the "Bin\Plugins\" folder of your ReSharper installation (default C:...ASP.NET MVC | SCAFFOLD: ASP.NET MVC SCAFFOLD - Beta 1.0: Release versão betaBizTalk Server 2006 Documenter: Documenter_v3.4.0.0: This is the new release of the documenter which has the following highlights Support for 64 bit systems Support for SxS scenarios (so now the sys...CassiniDev - Cassini 3.5/4.0 Developers Edition: CassiniDev 3.5.1 Beta 2- VS 2008 Replacement: The CassiniDev Visual Studio build is a fully compatibly Visual Studio 2008/2010 Development server drop-in replacement with all CassiniDev enhance...CBM-Command: 2010-05-22 Beta: Release Notes - 2010-05-22 BetaNew Features Simple text file viewer. Now when you use SHIFT-RETURN to open a file, it will ask if you want to view...Easy Validation: Documentation: Documentation for easyVal was created and presented at University of Texas at Austin in May of 2010.Entity Framework Repository & Unit of Work Template: 1.0: Initial ReleaseFrotz.NET: FrotzNet 1.0 beta: Many, many changes, including: - Got Adaptive Palette working for graphics - Got undo working - Implemented all zcodes - Added scripting as well as...Giving a Presentation: CTP: This release includes basic extensibility infrastructure and three extensions: hides desktop icons, disables screensaver, closes chosen programs wh...Gov 2.0 Kit: SharePoint 2010 MyPeeps Mysite Accelerators: SharePoint 2010 MyPeeps Mysite Accelerators. Attached are the installation and documentations files.HKGolden Express: HKGoldenExpress (Build 201005221900): New features: (None) Bug fix: Hong Kong special characters now can be posted without encoding problem. Improvements: (None) Other changes: (None) K...Intellibox - A WPF auto complete textbox search control: Beta 2: Updated the namespace of the Intellibox control from "System.Windows.Controls" to "FeserWard.Controls". Empty binding Path properties now work on...MDownloader: MDownloader-0.15.14.59111: Fixed DepositFile provider. Fixed FileFactory provider. Added simple fakeness detector (can check if .rar, .zip, .7z files have valid signature...Mute4: V1: Initial version of Mute4NLog - Advanced .NET Logging: Nightly Build 2010.05.22.003: Changes since the last build:No changes. Unit test results:Passed 191/191 (100%) Passed 191/191 (100%) Passed 214/214 (100%) Passed 216/216 (100%)...NSIS Autorun: NSIS Autorun 0.1.9: This release includes source code, executable binaries and example materials.Silverlight Gantt Chart: Silverlight Gantt Chart 1.3 (SL4): The latest release mainly makes the Gantt Chart useful in Silverlight 4 applications.SqlServerExtensions: V 0.2 beta: V 0.2 Beta release: New features available TrimStart - trim leading characters TrimEnd - trim trailing characters Remove - remove characters f...Traductor: Version 3.1: Nuevo en esta versión: El Traductor ahora permite escoger entre los motores de Microsoft y Google. El Text to Speech is es ahora habilitado por...VCC: Latest build, v2.1.30522.0: Automatic drop of latest buildVDialer Add-In for Outlook 2007 & 2010 - Dial your Vonage phone from Outlook: VDialer Add-In 1.0.3: This release adds new features related to Journal and use of Vonage API Changes in version 1.0.3 Added configurable option to automatically open J...WatchersNET.SkinObjects.ModulActionsMenu: ModulActionsMenu 01.00.00: First Release For Informations How To Install, the Skin Object Read the DocumentationMost Popular ProjectsCodeComment.NETRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)patterns & practices – Enterprise LibraryPHPExcelMicrosoft SQL Server Community & SamplesMost Active ProjectsRawrpatterns & practices – Enterprise LibraryCaliburn: An Application Framework for WPF and Silverlightpatterns & practices: Windows Azure Security GuidanceCassiniDev - Cassini 3.5/4.0 Developers EditionGMap.NET - Great Maps for Windows Forms & PresentationNB_Store - Free DotNetNuke Ecommerce Catalog ModuleSQL Server PowerShell ExtensionsBlogEngine.NETCodeReview

    Read the article

  • Toshiba Satellite L655D-S5050 Processor Upgrade

    - by C-dizzle
    I have been searching for hours to see what kind of upgrade I can do with my processor. I just ordered replacement memory so I can go to 8GB instead of 3GB and now want to see what is available for my CPU. Currently this is what is on my laptop: (in case some of you don't know what comes with this model) Windows 7 Home Pro - 64 Bit AMD M880G Chipset AMD Athlon II Dual Core P320 - 2.1 GHz, 1MB L2 Cache The memory I ordered was Crucial 2 x 4GB DDR3 1333 PC3-10600 I'm sure someone out there can help me, because google hasn't been to friendly with me today.

    Read the article

  • Why does my ReadyNas 4200 have a constant beep post disk failure

    - by swagner88
    Went to check on a high pitched constant beep coming from the server room and discovered that all the LED lights on the disks were black except one which had a constant green. Post a Re-boot nothing changed. Console indicated that that particular drive has failed. Pulled the drive out and BAM everything is fine. Except, the high pitched beep remains. Plan is currently to replace the drive with a new same size drive we happen to have purchased for expansion. My question is, what will this do? Will the NAS accept the new drive as a replacement for the failed one and decide to shut-up? The Manual for the device is almost to straight forward and says that I can just swap drives out as I need but I find that difficult to believe: http://www.readynas.com/download/documentation/HM/RN4200_HW_24May10.pdf

    Read the article

  • Charging a laptop battery, without a laptop.

    - by Crippledsmurf
    I have an old-ish laptop that only works on AC power because the battery is old and no longer holds a charge. I live in Christchurch New Zealand where there has recently been a number of very large earthquakes. During one of these earthquakes my laptop was thrown from my desk to the floor and now does not respond at all when the AC adapter is connected. Given that the laptop is not responding to power, is there another way I could charge a replacement battery for it as I don't currently have funds to repair the AC adapter on the box. My research would suggest that this isn't possible as chargers need to take into account the specifics of the model of battery being charged

    Read the article

  • "Input not Supported" on external monitor

    - by Shalan
    when it rains, it pours! Im helping a friend with his Dell Inspiron 1520. The hdd crashed and and top of that, the screen is cracked. I've replaced the hdd (SATA-5400), but the lcd replacement is only comin in a months time. I've tried to: hook the laptop up to an Acer 18.5" lcd monitor via VGA, boot up into Windows 7 installer, get to the Step-1 screen, Switch to external display (Function-F8) ...and get the "Input not supported" message on the Acer lcd. I know that this is a resolution problem, but cant for the life of me figure out how to solve this. I've also tried, hooking it up to my TV via Composite cables (got a VGA-Composite adaptor). Please could someone advise me what to do? -Thank u!

    Read the article

  • Event Viewer: atapi errors

    - by Wesley
    Specs for Samsung N120 Netbook Atom N270 @ 1.60 GHz / 160 GB IDE HDD / 2 GB PC2-5300 DDR2 RAM / Windows XP Home SP3 So I'm still getting some atapi errors in my Event Viewer. Here are two atapi errors I am getting over and over again: (1) The device, \Device\Ide\IdePort0, did not respond within the timeout period. (2) The driver detected a controller error on \Device\Ide\IdePort0. In addition, I am repeatedly getting this warning as well: (1) An error was detected on device \Device\Harddisk0\D during a paging operation. I just got this back from repair, where before, I couldn't boot at all because I was led to a black screen saying "Operating System Not Found". Still, I got it back and it can boot again, without any hard drive replacement or data loss. So, how can I get rid of these errors and warnings? What could have happened during repairs to allow my netbook to boot again? Thanks in advance.

    Read the article

  • How do I run shell script "convert" in OSX Mavericks

    - by user267219
    I have been successfully converting jpgs to pdf in Mountain Lion with: do shell script "/System/Library/Printers/Libraries/./convert -f " & "\"" & _posix & "\"" & " -o " & "\"" & _newPosix & "\"" I recently moved to Mavericks and now get this error: -- error "sh: /System/Library/Printers/Libraries/./convert: No such file or directory" number 127 The error message is right - the directory does not exist under Mavericks. Can anyone suggest a replacement for this code?

    Read the article

  • Is there a good XP like windows explorer for windows Vista?

    - by Brett Ryan
    I'm still refusing to go to Windows Vista and now Windows 7 mainly due to the windows explorer, I find it cumbersome and hard to use exclusively with a keyboard. I use XP file explorer in the most basic view, the address bar at the top and files always in list view underneath. The reason I do this is because I'm almost blind and do everything from the keyboard and don't touch the mouse whilst navigating through files, this is because I can type "L[ENTER]D[Enter]B[Enter]" and know that I'm in "c:\documents and settings\Brett Ryan", and I can hit [Tab] once to go to the address bar to type in a folder. Can anyone suggest a replacement for windows explorer that brings back this basic navigational behavior?

    Read the article

  • HTTP SSL VPN Client? (alternative to Cisco's AnyConnect VPN)

    - by Ian Boyd
    Is there any free HTTP SSL VPN clients around, one that can act as an alternative to Cisco's own HTTP SSL VPN client (called AnyConnect)? The Cisco AnyConnect client has acknowledged problems, with no forthcoming solutions. Which is why I'm hoping for an alternative. Note: I'm only talking about the HTTP SSL VPN Client, not the HTTP SSL VPN Server. (If it were up to me they wouldn't be using Cisco at all, but it's not up to me.) Note: OpenVPN is a client that talks to their servers once you sign up for their service. It's not a generic VPN client. Note: ShrewSoft VPN is a client that uses IPsec and pre-shared keys, and was a good replacement for Cisco's old client - but not the new AnyConnect SSL VPN client. Note: Windows 7's VPN client fails to negotiate when presented with an SSL VPN connection. Note: I am looking for Windows clients only.

    Read the article

  • Gateway SX2300-01u CPU/PSU issues

    - by Vlad
    I have a 2-yr-old Gateway SX2300-01u with an AMD Phenom X3 8550 that I feel has about a year or so of life left, but I am having a couple of hardware issues that I have not been able to resolve. First, the power supply fan sounds like much louder than before and the PSU itself is really hot. The PSU model (Liteon PS 5221-06) is not available at a reasonable price; are there any good alternatives? Could I replace just the PSU fan? Also, the CPU fan failed sometime back, but my replacement, which supposedly fits the MB (Socket AM2+) doesn't actually fit properly. Any idea why?

    Read the article

  • Diagnosing laptop charging issues

    - by Ben
    My HP dv6000 laptop will not run on battery power. It will only run while plugged into the wall. I have already replaced the battery, but it still will not operate on battery power. The problem began slowly. The original battery's life got shorter and shorter, until eventually it would only last ~45 seconds before going into hibernation. Finally, the battery would not work at all, so I threw it out and just used it without a battery. I bought a replacement recently.... but the problem persists. When I connect the new battery to the system, the "charging" light turns on for about 30 seconds, then goes dark. I'm assuming there's something wrong with the internal charging circuitry? If this is the case, how would I go about fixing this, short of buying a new motherboard? If anyone could give me some assistance in confirming/rejecting my diagnosis I'd be very appreciative! :)

    Read the article

  • Postfix configuration - Uing virtual min but server is bouncing back my mail.

    - by brodiebrodie
    I have no experience in setting up postfix, and thought virtualmin minght do the legwork for me. Appears not. When I try to send mail to the domain (either [email protected] [email protected] or [email protected]) I get the following message returned This is the mail system at host dedq239.localdomain. I'm sorry to have to inform you that your message could not be delivered to one or more recipients. It's attached below. For further assistance, please send mail to <postmaster> If you do so, please include this problem report. You can delete your own text from the attached returned message. The mail system <[email protected]> (expanded from <[email protected]>): User unknown in virtual alias table Final-Recipient: rfc822; [email protected] Original-Recipient: rfc822;[email protected] Action: failed Status: 5.0.0 Diagnostic-Code: X-Postfix; User unknown in virtual alias table How can I diagnose the problem here? It seems that the mail gets to my server but the server fails to locally deliver the message to the correct user. (This is a guess, truthfully I have no idea what is happening). I have checked my virtual alias table and it seems to be set up correctly (I can post if this would be helpful). Can anyone give me a clue as to the next step? Thanks alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 html_directory = no local_recipient_maps = $virtual_mailbox_maps mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost, $mydomain myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = permit_mynetworks reject_unauth_destination smtpd_sasl_auth_enable = yes soft_bounce = no unknown_local_recipient_reject_code = 550 virtual_alias_maps = hash:/etc/postfix/virtual My mail log file (the last entry) Sep 30 15:13:47 dedq239 postfix/cleanup[7237]: 207C6B18158: message-id=<[email protected]> Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 207C6B18158: from=<[email protected]>, size=1805, nrcpt=1 (queue active) Sep 30 15:13:47 dedq239 postfix/error[7238]: 207C6B18158: to=<[email protected]>, orig_to=<[email protected]>, relay=none, delay=0.64, delays=0.61/0.01/0/0.02, dsn=5.0.0, status=bounced (User unknown in virtual alias table) Sep 30 15:13:47 dedq239 postfix/cleanup[7237]: 8DC13B18169: message-id=<[email protected]> Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 8DC13B18169: from=<>, size=3691, nrcpt=1 (queue active) Sep 30 15:13:47 dedq239 postfix/bounce[7239]: 207C6B18158: sender non-delivery notification: 8DC13B18169 Sep 30 15:13:47 dedq239 postfix/qmgr[7177]: 207C6B18158: removed Sep 30 15:13:48 dedq239 postfix/smtp[7240]: 8DC13B18169: to=<[email protected]>, relay=gmail-smtp-in.l.google.com[209.85.216.55]:25, delay=1.3, delays=0.02/0.01/0.58/0.75, dsn=2.0.0, status=sent (250 2.0.0 OK 1254348828 36si15082901pxi.91) Sep 30 15:13:48 dedq239 postfix/qmgr[7177]: 8DC13B18169: removed Sep 30 15:14:17 dedq239 postfix/smtpd[7233]: disconnect from mail-bw0-f228.google.com[209.85.218.228] etc.aliases file below I have not touched this file - myvirtualdomain is a replacement for my real domain name # Aliases in this file will NOT be expanded in the header from # Mail, but WILL be visible over networks or from /bin/mail. # # >>>>>>>>>> The program "newaliases" must be run after # >> NOTE >> this file is updated for any changes to # >>>>>>>>>> show through to sendmail. # # Basic system aliases -- these MUST be present. mailer-daemon: postmaster postmaster: root # General redirections for pseudo accounts. bin: root daemon: root adm: root lp: root sync: root shutdown: root halt: root mail: root news: root uucp: root operator: root games: root gopher: root ftp: root nobody: root radiusd: root nut: root dbus: root vcsa: root canna: root wnn: root rpm: root nscd: root pcap: root apache: root webalizer: root dovecot: root fax: root quagga: root radvd: root pvm: root amanda: root privoxy: root ident: root named: root xfs: root gdm: root mailnull: root postgres: root sshd: root smmsp: root postfix: root netdump: root ldap: root squid: root ntp: root mysql: root desktop: root rpcuser: root rpc: root nfsnobody: root ingres: root system: root toor: root manager: root dumper: root abuse: root newsadm: news newsadmin: news usenet: news ftpadm: ftp ftpadmin: ftp ftp-adm: ftp ftp-admin: ftp www: webmaster webmaster: root noc: root security: root hostmaster: root info: postmaster marketing: postmaster sales: postmaster support: postmaster # trap decode to catch security attacks decode: root # Person who should get root's mail #root: marc abuse-myvirtualdomain.com: [email protected] My etc/postfix/virtual file is below - again myvirtualdomain is a replacement. I think this file was generated by Virtualmin and I have tried messing around with is with no success... This is the version without my changes. myunixusername@myvirtualdomain .com myunixusername myvirtualdomain .com myvirtualdomain.com [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected] [email protected]

    Read the article

  • Screen broken of mi laptop, start with an external monitor

    - by Widrogo
    hi now I have a big problem my brother broken the screen of mi laptop, now the replacement of my screen arrives in three weeks, now I can not lose three weeks because my homework be in my memory, now I need start the laptop with external monitor, I want to know if there is a way to boot from the boot my laptop because I have dual boot and password I can not access my laptop with an external monitor for this reason. Now there is a way to start my laptop directly to an external monitor. I look for a solution, I need to remove my broken laptop screen and automatically will recognize the vga monitor but did not work me now i look for a solution and find that i need

    Read the article

  • ZFS SAS/SATA controller recommendations

    - by ewwhite
    I've been working with OpenSolaris and ZFS for 6 months, primarily on a Sun Fire x4540 and standard Dell and HP hardware. One downside to standard Perc and HP Smart Array controllers is that they do not have a true "passthrough" JBOD mode to present individual disks to ZFS. One can configure multiple RAID 0 arrays and get them working in ZFS, but it impacts hotswap capabilities (thus requiring a reboot upon disk failure/replacement). I'm curious as to what SAS/SATA controllers are recommended for home-brewed ZFS storage solutions. In addition, what effect does battery-backed write cache (BBWC) have in ZFS storage?

    Read the article

  • How to change image to this color?

    - by askmoo
    I have this image And I need to change it to the color #D21108 (type of RED). Of course, I do not want to paint it to this color, but to change the color to #D21108 and its shades (like I do in Photoshop via Brush Colour Replacement). I have all info about this color, values of RGB, CMYK, Lab and HSV if you need them. Now, I guess I can easily change it via GIMP's menu "Colors". I tried options Color Balance, Hue-Saturation, Colorize, but I did not find a way to enter the starting color I need. I was closest to my aim via Hue-Saturation, but I could not get this red value, no matter what I tried. As I am not a graphics expert, please tell me how to accomplish this task. PS. What's the meaning of Lab and HSV in the color scheme? I know the meaning of RGB and CMYK.

    Read the article

  • How do I restore a non-system hard drive using Time Machine under OSX?

    - by richardtallent
    I dropped one of the external drives on my Mac Pro and it started making noises... so I bought a replacement drive. No biggie, that's why I have Time Machine, right? So now that I have the new drive up and initialized, how do I actually restore the drive from backup? Time Machine is intuitive when it comes to restoring the system drive or restoring individual folders/files on the same literal device, but I'm a bit stuck in how to properly restore an entire drive that is not the boot drive. I saw one suggestion to use the same volume name as the old drive and then go into Time Machine. Haven't tried that since the information is unconfirmed. For now, I just went to the Time Machine volume, found the latest backup folder for that volume, and I'm copying the files via Finder. Of couse, I expect this to work just fine, but I feel like I'm missing something if that's the "proper" way to do this.

    Read the article

  • Arbitrary Key Remapping on a Mac

    - by Mason
    I bought a cheap Chinese replacement keyboard for my late 2007 MBP. The close square/curly bracket key actually sends a left control signal to the Mac. So I'm trying to remap my backslash/pipe key to be close square/curly bracket but I can't find the key remapping software to do it. Double Command and KeyRemap4Macbook can't do arbitrary key remaps and uControl/fkeys don't work on Snow Leopard. Anyone have ideas? I have no problem editing text config files if necessary.

    Read the article

  • Is a "failed" RAID 5 disk really no good?

    - by GregH
    This is my first venture in to setting up RAID on my home system. After installing 3 x 1TB drives in RAID 5, everything was running well for about 10 days. Then, the Intel Rapid Storage Technology software that monitors the disks and RAID on my system, told me that I had a failed drive. I marked the drive as good, and the array rebuilt. Then a day or so later I got a notification again, that the drive failed. I'm just wondering if this drive really is no good or if there is something I can do to get it working again? Or, do I just need to return it to the store where I bought it and get a replacement?

    Read the article

  • How can I make it difficult to install a new operating system on a certain computer?

    - by D W
    I want to host a website on a desktop computer running Ubuntu with a Windows virtual machine. I will give away the computer in exchange for a number of months of remote web hosting. I want to add some kind of lock (hardware or otherwise) so that the end users will have difficulty just reinstalling Windows and using the machine as they want, in contradiction to the contract. Ideally, I'd want the machine to die if reinstallation of the OS is attempted. It doesn't have to be completely insurmountable, but it has to be difficult enough to prevent casual reinstallation. Perhaps on bootup the system can check whether certain files exist on the computer and refuse to boot if they do not. I don't know if this is possible, but maybe BIOS is password protected, and searches for files before boot up. The files it looks for could be date sensitive, i.e. require remote replacement on a schedule.

    Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >