Search Results

Search found 11331 results on 454 pages for 'resource monitor'.

Page 30/454 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• Using a portable USB monitor in Ubuntu 13.04 (AOC e1649Fwu - DisplayLink)

  Having access to a little bit of IT hardware extravaganza isn't that easy here in Mauritius for exactly two reasons - either it is simply not available or it is expensive like nowhere. Well, by chance I came across an advert by a local hardware supplier and their offer of the week caught my attention - a portable USB monitor. Sounds cool, and the specs are okay as well. It's completely driven via USB 2.0, has a light weight, the dimensions would fit into my laptop bag and the resolution of 1366 x 768 pixels is okay for a second screen. Long story, short ending: I called them and only got to understand that they are out of stock - how convenient! Well, as usual I left some contact details and got the regular 'We call you back' answer. Surprisingly, I didn't receive a phone call as promised and after starting to complain via social media networks they finally came back to me with new units available - and *drum-roll* still the same price tag as promoted (and free delivery on top as one of their employees lives in Flic en Flac). Guess, it was a no-brainer to get at least one unit to fool around with. In worst case it might end up as image frame on the shelf or so... The usual suspects... Ubuntu first! Of course, the packing mentions only Windows or Mac OS as supported operating systems and without hesitation at all, I hooked up the device on my main machine running on Ubuntu 13.04. Result: Blackout... Hm, actually not the situation I was looking for but okay can't be too difficult to get this piece of hardware up and running. Following the output of syslogd (or dmesg if you prefer) the device has been recognised successfully but we got stuck in the initialisation phase. Oct 12 08:17:23 iospc2 kernel: [69818.689137] usb 2-4: new high-speed USB device number 5 using ehci-pciOct 12 08:17:23 iospc2 kernel: [69818.800306] usb 2-4: device descriptor read/64, error -32Oct 12 08:17:24 iospc2 kernel: [69819.043620] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 12 08:17:24 iospc2 kernel: [69819.043630] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 12 08:17:24 iospc2 kernel: [69819.043636] usb 2-4: Product: e1649FwuOct 12 08:17:24 iospc2 kernel: [69819.043642] usb 2-4: Manufacturer: DisplayLinkOct 12 08:17:24 iospc2 kernel: [69819.043647] usb 2-4: SerialNumber: FJBD7HA000778Oct 12 08:17:24 iospc2 kernel: [69819.046073] hid-generic 0003:17E9:4107.0008: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 12 08:17:24 iospc2 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 12 08:17:24 iospc2 mtp-probe: bus: 2, device: 5 was not an MTP deviceOct 12 08:17:30 iospc2 kernel: [69825.411220] [drm] vendor descriptor length:17 data:17 5f 01 00 15 05 00 01 03 00 04Oct 12 08:17:30 iospc2 kernel: [69825.498778] udl 2-4:1.0: fb1: udldrmfb frame buffer deviceOct 12 08:17:30 iospc2 kernel: [69825.498786] [drm] Initialized udl 0.0.1 20120220 on minor 1Oct 12 08:17:30 iospc2 kernel: [69825.498909] usbcore: registered new interface driver udl The device has been recognised as USB device without any question and it is listed properly: # lsusb...Bus 002 Device 005: ID 17e9:4107 DisplayLink ... A quick and dirty research on the net gave me some hints towards the udlfb framebuffer device for USB DisplayLink devices. By default this kernel module is blacklisted $ less /etc/modprobe.d/blacklist-framebuffer.conf | grep udl#blacklist udlblacklist udlfb and it is recommended to load it manually. So, unloading the whole udl stack and giving udlfb a shot: Oct 12 08:22:31 iospc2 kernel: [70126.642809] usbcore: registered new interface driver udlfb But still no reaction on the external display which supposedly should have been on and green. Display okay? Test run on Windows Just to be on the safe side and to exclude any hardware related defects or whatsoever - you never know what happened during delivery. I moved the display to a new position on the opposite side of my laptop, installed the display drivers first in Windows Vista (I know, I know...) as recommended in the manual, and then finally hooked it up on that machine. Tada! Display has been recognised correctly and I have a proper choice between cloning and extending my desktop. Testing whether the display is working properly - using Windows Vista Okay, good to know that there is nothing wrong on the hardware side just software... Back to Ubuntu - Kernel too old Some more research on Google and various hits recommend that the original displaylink driver has been merged into the recent kernel development and one should manually upgrade the kernel image (and both header) packages for Ubuntu. At least kernel 3.9 or higher would be necessary, and so I went out to this URL: http://kernel.ubuntu.com/~kernel-ppa/mainline/ and I downloaded all the good stuff from the v3.9-raring directory. The installation itself is easy going via dpkg: $ sudo dpkg -i linux-image-3.9.0-030900-generic_3.9.0-030900.201304291257_amd64.deb$ sudo dpkg -i linux-headers-3.9.0-030900_3.9.0-030900.201304291257_all.deb$ sudo dpkg -i linux-headers-3.9.0-030900-generic_3.9.0-030900.201304291257_amd64.deb As with any kernel upgrades it is necessary to restart the system in order to use the new one. Said and done: $ uname -r3.9.0-030900-generic And now connecting the external display gives me the following output in /var/log/syslog: Oct 12 17:51:36 iospc2 kernel: [ 2314.984293] usb 2-4: new high-speed USB device number 6 using ehci-pciOct 12 17:51:36 iospc2 kernel: [ 2315.096257] usb 2-4: device descriptor read/64, error -32Oct 12 17:51:36 iospc2 kernel: [ 2315.337105] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 12 17:51:36 iospc2 kernel: [ 2315.337115] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 12 17:51:36 iospc2 kernel: [ 2315.337122] usb 2-4: Product: e1649FwuOct 12 17:51:36 iospc2 kernel: [ 2315.337127] usb 2-4: Manufacturer: DisplayLinkOct 12 17:51:36 iospc2 kernel: [ 2315.337132] usb 2-4: SerialNumber: FJBD7HA000778Oct 12 17:51:36 iospc2 kernel: [ 2315.338292] udlfb: DisplayLink e1649Fwu - serial #FJBD7HA000778Oct 12 17:51:36 iospc2 kernel: [ 2315.338299] udlfb: vid_17e9&pid_4107&rev_0129 driver's dlfb_data struct at ffff880117e59000Oct 12 17:51:36 iospc2 kernel: [ 2315.338303] udlfb: console enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338306] udlfb: fb_defio enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338309] udlfb: shadow enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338468] udlfb: vendor descriptor length:17 data:17 5f 01 0015 05 00 01 03 00 04Oct 12 17:51:36 iospc2 kernel: [ 2315.338473] udlfb: DL chip limited to 1500000 pixel modesOct 12 17:51:36 iospc2 kernel: [ 2315.338565] udlfb: allocated 4 65024 byte urbsOct 12 17:51:36 iospc2 kernel: [ 2315.343592] hid-generic 0003:17E9:4107.0009: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 12 17:51:36 iospc2 mtp-probe: checking bus 2, device 6: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 12 17:51:36 iospc2 mtp-probe: bus: 2, device: 6 was not an MTP deviceOct 12 17:51:36 iospc2 kernel: [ 2315.426583] udlfb: 1366x768 @ 59 Hz valid modeOct 12 17:51:36 iospc2 kernel: [ 2315.426589] udlfb: Reallocating framebuffer. Addresses will change!Oct 12 17:51:36 iospc2 kernel: [ 2315.428338] udlfb: 1366x768 @ 59 Hz valid modeOct 12 17:51:36 iospc2 kernel: [ 2315.428343] udlfb: set_par mode 1366x768Oct 12 17:51:36 iospc2 kernel: [ 2315.430620] udlfb: DisplayLink USB device /dev/fb1 attached. 1366x768 resolution. Using 4104K framebuffer memory Okay, that's looks more promising but still only blackout on the external screen... And yes, due to my previous modifications I swapped the blacklisted kernel modules: $ less /etc/modprobe.d/blacklist-framebuffer.conf | grep udlblacklist udl#blacklist udlfb Silly me! Okay, back to the original situation in which udl is allowed and udlfb blacklisted. Now, the logging looks similar to this and the screen shows those maroon-brown and azure-blue horizontal bars as described on other online resources. Oct 15 21:27:23 iospc2 kernel: [80934.308238] usb 2-4: new high-speed USB device number 5 using ehci-pciOct 15 21:27:23 iospc2 kernel: [80934.420244] usb 2-4: device descriptor read/64, error -32Oct 15 21:27:24 iospc2 kernel: [80934.660822] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 15 21:27:24 iospc2 kernel: [80934.660832] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 15 21:27:24 iospc2 kernel: [80934.660838] usb 2-4: Product: e1649FwuOct 15 21:27:24 iospc2 kernel: [80934.660844] usb 2-4: Manufacturer: DisplayLinkOct 15 21:27:24 iospc2 kernel: [80934.660850] usb 2-4: SerialNumber: FJBD7HA000778Oct 15 21:27:24 iospc2 kernel: [80934.663391] hid-generic 0003:17E9:4107.0008: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 15 21:27:24 iospc2 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 15 21:27:24 iospc2 mtp-probe: bus: 2, device: 5 was not an MTP deviceOct 15 21:27:25 iospc2 kernel: [80935.742407] [drm] vendor descriptor length:17 data:17 5f 01 00 15 05 00 01 03 00 04Oct 15 21:27:25 iospc2 kernel: [80935.834403] udl 2-4:1.0: fb1: udldrmfb frame buffer deviceOct 15 21:27:25 iospc2 kernel: [80935.834416] [drm] Initialized udl 0.0.1 20120220 on minor 1Oct 15 21:27:25 iospc2 kernel: [80935.836389] usbcore: registered new interface driver udlOct 15 21:27:25 iospc2 kernel: [80936.021458] [drm] write mode info 153 Next, it's time to enable the display for our needs... This can be done either via UI or console, just as you'd prefer it. Adding the external USB display under Linux isn't an issue after all... Settings Manager => Display Personally, I like the console. With the help of xrandr we get the screen identifier first $ xrandrScreen 0: minimum 320 x 200, current 3200 x 1080, maximum 32767 x 32767LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm...DVI-0 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm   1366x768       60.0*+ and then give it the usual shot with auto-configuration. Let the system decide what's best for your hardware... $ xrandr --output DVI-0 --off$ xrandr --output DVI-0 --auto And there we go... Cloned output of main display: New kernel, new display... The external USB display works out-of-the-box with a Linux kernel > 3.9.0. Despite of a good number of resources it is absolutely not necessary to create a Device or Screen section in one of Xorg.conf files. This information belongs to the past and is not valid on kernel 3.9 or higher. Same hardware but Windows 8 Of course, I wanted to know how the latest incarnation from Redmond would handle the new hardware... Flawless! Most interesting aspect here: I did not use the driver installation medium on purpose. And I was right... not too long afterwards a dialog with the EULA of DisplayLink appeared on the main screen. And after confirmation of same it took some more seconds and the external USB monitor was ready to rumble. Well, and not only that one... but see for yourself. This time Windows 8 was the easiest solution after all. Resume I can highly recommend this type of hardware to anyone asking me. Although, it's dimensions are 15.6" it is actually lighter than my Samsung Galaxy Tab 10.1 and it still fits into my laptop bag without any issues. From now on... no more single screen while developing software on the road!

  Read the article

• Cannot set monitor to native resolution

  - by S B

  problem is similar to so many other users, but solutions found do not work. Background: Fresh install of 12.04 (completely updated) on a Fit-PC2 (specs). Read in several places that the new 3.X kernel that 12.04 runs on has a new psb_gfx driver which supports the gma500 graphics card (poulsbo chipset). All's pretty much working (there are some glitches which are documented, so I won't raise them here), except for the screen resolution. My native monitor resolution is 1920X1080, but all I get is 1024x768. Output running xrandr: xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0* Although I read that Ubuntu does not come with an xorg.conf file anymore, I also tried running sudo X :1 -configure, and here's the end of the output: Number of created screens does not match number of detected devices. Configuration failed. When I look in the xorg.conf.new file created in my home directory, it seems that for some reason X thinks I have two screens. Don't know what to do with that. Ideas anyone? Thanks for your time.

  Read the article

• Is this a dual monitor reset bug?

  - by Tentresh

  My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) A few minutes after I login to my dual monitor setup, it gets reset to mirror screens. If I restore the settings via the displays application, everything is fine. On each reset, the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset, /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like its interface, but manually fiddling with resolution on every login is not bearable.

  Read the article

• Another good free utility - Campwood Software Source Monitor

  - by TATWORTH

  The Campwoood Source Monitor at http://www.campwoodsw.com/sourcemonitor.html  says in its introduction "The freeware program SourceMonitor lets you see inside your software source code to find out how much code you have and to identify the relative complexity of your modules. For example, you can use SourceMonitor to identify the code that is most likely to contain defects and thus warrants formal review. SourceMonitor, written in C++, runs through your code at high speed, typically at least 10,000 lines of code per second." It is indeed very high-speed and is useful as it: Collects metrics in a fast, single pass through source files. Measures metrics for source code written in C++, C, C#, VB.NET, Java, Delphi, Visual Basic (VB6) or HTML. Includes method and function level metrics for C++, C, C#, VB.NET, Java, and Delphi. Offers Modified Complexity metric option. Saves metrics in checkpoints for comparison during software development projects. Displays and prints metrics in tables and charts, including Kiviat diagrams. Operates within a standard Windows GUI or inside your scripts using XML command files. Exports metrics to XML or CSV (comma-separated-value) files for further processing with other tools.

  Read the article

• Ubuntu 12.04 dual monitor reset bug

  - by Tentresh

  My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) Few minutes after I login to my dual monitor setup its get reset to mirror screens. If I restore the settings via displays application everything is fine. On each reset the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like it's interface, but manually fiddling with resolution on every login is not bearable.

  Read the article

• Dual monitor, permission issue

  - by cenna75

  I had a dual monitor configuration going on for quite some time. One day, after moving the computer to another location and reconnecting everything, it changed such that I saw everything in double (being very much sober), I think it's called the 'mirrors' config. Anyway, from there on, there was nothing to be done through the system settings gui to change it back, as it wouldn't allow me to save any modification. The error I get when clicking 'save' is : "Failed to create file /home/me/monitors.xml.xxxxxx. Permission denied", xxxx being a random code, changing everytime. However, I can save all the configurations I want just fine by using the terminal, in my case: xrandr --output DVI-I-1 --right-of VGA-1 So I do have a workaround and this is therefore a question more out of curiosity. What could possibly have changed to make it impossible to do it through the gui and still letting me change the config using xrandr without being root? I'm having a hard time believing it could have anything to do with disconnecting/reconnecting the monitors... Any idea? Thanks !

  Read the article

• Resource reference passing in puppet

  - by paweloque

  Is it possible to pass puppet resource references to other resources? My use-case is to build a jenkins build pipeline with puppet. To chain jenkins jobs into a pipeline I need to pass the successor job to a job. A subset of the definition is: jobs::build { "Build ${release_name}": release => $release_name, jenkins_jobs_path => $jenkins_jobs_path, successors => 'Deploy', } jobs::deploy { "Deploy ${release_name}": release => $release_name, jenkins_jobs_path => $jenkins_jobs_path, successors => 'Smoke Test', } In the def you see that I define the successors by name, i.e. 'Deploy' and in case of the second job 'Smoke Test'. What I'd like to do is to pass a reference to a resource and extract the name from it: jobs::build { "Build ${release_name}": release => $release_name, jenkins_jobs_path => $jenkins_jobs_path, successors => Jobs::Deploy["Deploy ${release_name}"], } jobs::deploy { "Deploy ${release_name}": release => $release_name, jenkins_jobs_path => $jenkins_jobs_path, successors => Jobs::Smoke_test["Smoke Test ${release_name}"], } And then within the jobs::deploy and jobs::build definition I'd access the resource by reference and query for it's type, etc.. Is it possible to achieve this in puppet?

  Read the article

• Lock statement vs Monitor.Enter method.

  - by Vokinneberg

  I suppose it is an interesting code example. We have a class, let's call it Test with Finalize method. In Main method here is two code blocks where i am using lock statement and Monitor.Enter call. Also i have two instances of class Test here. The experiment is pretty simple - nulling Test variable within locking block and try to collect it manually with GC.Collect method call. So, to see the Finilaze call i am calling GC.WaitForPendingFinalizers method. Everything is very simple as you can see. By defenition of lock statement it's opens by compiler to try{...}finally{..} block with Minitor.Enter call inside of try block and Monitor.Exit in finally block. I've tryed to implement try-finally block manually. I've expected the same behaviour in both cases. in case of using lock and in case of unsing Monitor.Enter. But, surprize, surprize - it is different as you can see below. public class Test : IDisposable { private string name; public Test(string name) { this.name = name; } ~Test() { Console.WriteLine(string.Format("Finalizing class name {0}.", name)); } } class Program { static void Main(string[] args) { var test1 = new Test("Test1"); var test2 = new Test("Tesst2"); lock (test1) { test1 = null; Console.WriteLine("Manual collect 1."); GC.Collect(); GC.WaitForPendingFinalizers(); Console.WriteLine("Manual collect 2."); GC.Collect(); } var lockTaken = false; System.Threading.Monitor.Enter(test2, ref lockTaken); try { test2 = null; Console.WriteLine("Manual collect 3."); GC.Collect(); GC.WaitForPendingFinalizers(); Console.WriteLine("Manual collect 4."); GC.Collect(); } finally { System.Threading.Monitor.Exit(test2); } Console.ReadLine(); } } Output of this example is Manual collect 1. Manual collect 2. Manual collect 3. Finalizing class name Test2. Manual collect 4. And null reference exception in last finally block because test2 is null reference. I've was surprised and disasembly my code into IL. So, here is IL dump of Main method. .entrypoint .maxstack 2 .locals init ( [0] class ConsoleApplication2.Test test1, [1] class ConsoleApplication2.Test test2, [2] bool lockTaken, [3] bool <>s__LockTaken0, [4] class ConsoleApplication2.Test CS$2$0000, [5] bool CS$4$0001) L_0000: nop L_0001: ldstr "Test1" L_0006: newobj instance void ConsoleApplication2.Test::.ctor(string) L_000b: stloc.0 L_000c: ldstr "Tesst2" L_0011: newobj instance void ConsoleApplication2.Test::.ctor(string) L_0016: stloc.1 L_0017: ldc.i4.0 L_0018: stloc.3 L_0019: ldloc.0 L_001a: dup L_001b: stloc.s CS$2$0000 L_001d: ldloca.s <>s__LockTaken0 L_001f: call void [mscorlib]System.Threading.Monitor::Enter(object, bool&) L_0024: nop L_0025: nop L_0026: ldnull L_0027: stloc.0 L_0028: ldstr "Manual collect." L_002d: call void [mscorlib]System.Console::WriteLine(string) L_0032: nop L_0033: call void [mscorlib]System.GC::Collect() L_0038: nop L_0039: call void [mscorlib]System.GC::WaitForPendingFinalizers() L_003e: nop L_003f: ldstr "Manual collect." L_0044: call void [mscorlib]System.Console::WriteLine(string) L_0049: nop L_004a: call void [mscorlib]System.GC::Collect() L_004f: nop L_0050: nop L_0051: leave.s L_0066 L_0053: ldloc.3 L_0054: ldc.i4.0 L_0055: ceq L_0057: stloc.s CS$4$0001 L_0059: ldloc.s CS$4$0001 L_005b: brtrue.s L_0065 L_005d: ldloc.s CS$2$0000 L_005f: call void [mscorlib]System.Threading.Monitor::Exit(object) L_0064: nop L_0065: endfinally L_0066: nop L_0067: ldc.i4.0 L_0068: stloc.2 L_0069: ldloc.1 L_006a: ldloca.s lockTaken L_006c: call void [mscorlib]System.Threading.Monitor::Enter(object, bool&) L_0071: nop L_0072: nop L_0073: ldnull L_0074: stloc.1 L_0075: ldstr "Manual collect." L_007a: call void [mscorlib]System.Console::WriteLine(string) L_007f: nop L_0080: call void [mscorlib]System.GC::Collect() L_0085: nop L_0086: call void [mscorlib]System.GC::WaitForPendingFinalizers() L_008b: nop L_008c: ldstr "Manual collect." L_0091: call void [mscorlib]System.Console::WriteLine(string) L_0096: nop L_0097: call void [mscorlib]System.GC::Collect() L_009c: nop L_009d: nop L_009e: leave.s L_00aa L_00a0: nop L_00a1: ldloc.1 L_00a2: call void [mscorlib]System.Threading.Monitor::Exit(object) L_00a7: nop L_00a8: nop L_00a9: endfinally L_00aa: nop L_00ab: call string [mscorlib]System.Console::ReadLine() L_00b0: pop L_00b1: ret .try L_0019 to L_0053 finally handler L_0053 to L_0066 .try L_0072 to L_00a0 finally handler L_00a0 to L_00aa I does not see any difference between lock statement and Monitor.Enter call. So, why i steel have a reference to the instance of test1 in case of lock, and object is not collected by GC, but in case of using Monitor.Enter it is collected and finilized?

  Read the article

• Can I use all my RAM for application data?

  - by gsedej

  Hi! I have yet another question about "where is my Linux memory" Question goes: can I use cache for application data? On my laptop I have 1GB ram. Situation after some time of work: browser takes 400MB and all other apps caa 300MB (quickly summed in system monitor). System monitor says I use 90% of RAM and I have already 200MB on swap. Laptop is getting slower when I start new things (e.g. open new tab in browser or open new Nautilus window). probably putting memory on swap So there should be 1200MB (ram+swap) used but all app I see uses only 600MB. Where are other 600MB? Out of this 600MB there is 400MB real RAM. I am not copying or any other massive IO activity. I read about Linux smartly uses all ram it has using buffers and cache. So, kernel (cache) uses 300MB. What if I don't want to have disk mirrored and I want to use memory for application data (e.g. new browser tab)? I don't need 200MB of mirrored disk data, because I (for example) won't use open the same photos on data partition I just seen. So can I use all my RAM for application data? (including browser, desktop, xorg, other services). How?

  Read the article

• nvidia-settings error: nvidia driver not in use

  - by Bastarasov

  I have an Asus with GEFORCE GT520M CUDA (Optimus) and I am running Kubuntu 12.04, 64bit. I am trying to connect an external monitor through DVI and the monitor is not detected. Nvidia settings dont show properly and each time I fire them up there is a warning message: "You do not appear to be using the NVidia X driver. Please, edit...." (you probably know it and heard of this before). I have googled a lot and I have tried some things out but no luck so far. Is there a solution which has worked for someone out there? If so, please be very specific about what I need to do since I am really not good at using the terminal and generally new to ubuntu. I can use the terminal only to copy-paste things. :) Thanks in advance to everyone! ps. Seems like some people dealt with this by fixing the Nvidia settings problem but the instructions have never been clear enough for me to be able to understand.

  Read the article

• Connecting / disconnecting DisplayPort causes crash

  - by iGadget

  I wanted to file a bug about this using ubuntu-bug xserver-xorg-video-intel, but the system prompted my to try posting here first. So here goes :-) While the situation in Ubuntu 11.10 was still somewhat workable (see UI freezes when disconnecting DisplayPort), in 12.04 (using Unity 3D) it has gotten worse. The weird part is that during the 12.04 beta's, the situation was actually improving! I was able to successfully connect and disconnect a DisplayPort monitor without the system breaking down on me. But now with 12.04 final (with all updates), it's just plain terrible. When I now connect an external monitor using the DisplayPort connector on my HP ProBook 6550b, it only works sometimes. Most times (but not always!) the screen just goes blank and the system seems to crash (not even CTRL+ALT+F1 works anymore). Only a hard shutdown by keeping the power button pressed for several seconds and then a restart gets me out of this. I suspect the chances of the system crashing become higher as the system's uptime increases, especially when there have been one or more suspend-resume cycles (although I have also experienced this bug once from a cold boot). Disconnecting is roughly the same as with 11.10 (see issue mentioned above), with the difference that if I resume from suspend, I no longer have to do a CTRL+ALT+F1, ALT+F7 cycle to get my screen back. So what more can I try? Or should I just go ahead and file the bug anyway?

  Read the article

• Where is my ram?

  - by gsedej

  I have 2GB installed on my machine running Ubuntu 12.04. After some time of use, I see much of my RAM used. The RAM does not free enough even though I closed all my programs. I included 2 screenshots. First is "Gnome system monitor" (all process) and second is "htop" (with sudo), both sorted by memory usage. From both you see, that it's not possible that all running apps takes together 1GB of memory. First 7 biggest programs sum 250, but others are much smaller (all can't sum even 100MB). The cache is 300MB (yellow ||| on htop) and is not included in 1GB used. Also 260MB is already on swap. (which actually makes 1,3GB of used memory) If i start Firefox (or Chrome) with many tabs, it has only 1GB available and not potentially 1,5 GB (assume 0,5GB is for system). When I need more ram, swapping happens. So where is my ram? Which program is using it? How can i free it, to be available for e.g. Firefox? Gnome system monitor htop

  Read the article

• Nvidia Fullscreen Metanode "Sliding" Issue

  - by user68202

  i have 2 monitors, the left one is my "main" monitor with 1920x1080_120, the right one my second with 1680x1050_60. (i have a nvidia card setup with twinview) when i play a game or something in fullscreen mode, the full resolution is used in fullscreen (monitor 1 + monitor 2). i read something about the metanodes i can use to shut down the one monitor that i dont need durning a "fullscreen session". i used the following: Option "metamodes" "DFP-0: 1920x1080_120 +0+0, DFP-2: 1680x1050_60 +1920+0; DFP: 1920x1080_120 +0+0, NULL" Its working great, the second (right) monitor is shutting down when i press "CTRL ALT +" and is starting agin when i press the same keystroke. But in the second mode when the second monitor is "down", i got the full "monitor 1 + monitor 2" resolution on my first (left) monitor, i can move my mouse to the right to see the contents of the second monitor and move it again to the left to the what is normally seen on the first monitor. Its something sliding between the 2 monitors on one display. How can i avoid this?

  Read the article

• Monitor SQL Server Replication Jobs

  - by Yaniv Etrogi

  The Replication infrastructure in SQL Server is implemented using SQL Server Agent to execute the various components involved in the form of a job (e.g. LogReader agent job, Distribution agent job, Merge agent job) SQL Server jobs execute a binary executable file which is basically C++ code. You can download all the scripts for this article here SQL Server Job Schedules By default each of job has only one schedule that is set to Start automatically when SQL Server Agent starts. This schedule ensures that when ever the SQL Server Agent service is started all the replication components are also put into action. This is OK and makes sense but there is one problem with this default configuration that needs improvement  -  if for any reason one of the components fails it remains down in a stopped state.   Unless you monitor the status of each component you will typically get to know about such a failure from a customer complaint as a result of missing data or data that is not up to date at the subscriber level. Furthermore, having any of these components in a stopped state can lead to more severe problems if not corrected within a short time. The action required to improve on this default settings is in fact very simple. Adding a second schedule that is set as a Daily Reoccurring schedule which runs every 1 minute does the trick. SQL Server Agent’s scheduler module knows how to handle overlapping schedules so if the job is already being executed by another schedule it will not get executed again at the same time. So, in the event of a failure the failed job remains down for at most 60 seconds. Many DBAs are not aware of this capability and so search for more complex solutions such as having an additional dedicated job running an external code in VBS or another scripting language that detects replication jobs in a stopped state and starts them but there is no need to seek such external solutions when what is needed can be accomplished by T-SQL code. SQL Server Jobs Status In addition to the 1 minute schedule we also want to ensure that key components in the replication are enabled so I can search for those components by their Category, and set their status to enabled in case they are disabled, by executing the stored procedure MonitorEnableReplicationAgents. The jobs that I typically have handled are listed below but you may want to extend this, so below is the query to return all jobs along with their category. SELECT category_id, name FROM msdb.dbo.syscategories ORDER BY category_id; Distribution Cleanup LogReader Agent Distribution Agent Snapshot Agent Jobs By default when a publication is created, a snapshot agent job also gets created with a daily schedule. I see more organizations where the snapshot agent job does not need to be executed automatically by the SQL Server Agent  scheduler than organizations who   need a new snapshot generated automatically. To assure this setting is in place I created the stored procedure MonitorSnapshotAgentsSchedules which disables snapshot agent jobs and also deletes the job schedule. It is worth mentioning that when the publication property immediate_sync is turned off then the snapshot files are not created when the Snapshot agent is executed by the job. You control this property when the publication is created with a parameter called @immediate_sync passed to sp_addpublication and for an existing publication you can use sp_changepublication. Implementation The scripts assume the existence of a database named PerfDB. Steps: Run the scripts to create the stored procedures in the PerfDB database. Create a job that executes the stored procedures every hour. -- Verify that the 1_Minute schedule exists. EXEC PerfDB.dbo.MonitorReplicationAgentsSchedules @CategoryId = 10; /* Distribution */ EXEC PerfDB.dbo.MonitorReplicationAgentsSchedules @CategoryId = 13; /* LogReader */ -- Verify all replication agents are enabled. EXEC PerfDB.dbo.MonitorEnableReplicationAgents @CategoryId = 10; /* Distribution */ EXEC PerfDB.dbo.MonitorEnableReplicationAgents @CategoryId = 13; /* LogReader */ EXEC PerfDB.dbo.MonitorEnableReplicationAgents @CategoryId = 11; /* Distribution clean up */ -- Verify that Snapshot agents are disabled and have no schedule EXEC PerfDB.dbo.MonitorSnapshotAgentsSchedules; Want to read more of about replication? Check at my replication posts at my blog.

  Read the article

• Swap not available on System Monitor

  - by Zaki

  I had a swap partition of 1GB (RAM 1GB, Ubuntu 12.04 lts). Now swap is not shown on System Monitor neither can I hibernate my pc (sudo pm-hibernate). blkid output: /dev/sda1: UUID="B8B4FBB1B4FB706C" TYPE="ntfs" /dev/sda2: UUID="2ea7d608-2d89-4e41-9436-d05cb3ce8871" TYPE="swap" /dev/sda3: UUID="3219d03a-67e4-454b-8ce7-a27831846e35" TYPE="ext4" /dev/sda5: LABEL="Softwares" UUID="AC1CC3301CC2F47C" TYPE="ntfs" /dev/sda6: LABEL="Education" UUID="1E103E6C103E4B53" TYPE="ntfs" /dev/sda7: LABEL="Recreation" UUID="2CC8D181C8D149AA" TYPE="ntfs" /dev/sda8: LABEL="Miscellaneous" UUID="0274D6B174D6A727" TYPE="ntfs" /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=3219d03a-67e4-454b-8ce7-a27831846e35 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=2ea7d608-2d89-4e41-9436-d05cb3ce8871 none swap sw 0 0 free -m total used free shared buffers cached Mem: 991 867 123 0 27 418 -/+ buffers/cache: 421 569 Swap: 0 0 0 cat /proc/swaps Filename Type Size Used Priority fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9f369f36 Device Boot Start End Blocks Id System /dev/sda1 * 63 31471334 15735636 7 HPFS/NTFS/exFAT /dev/sda2 31471616 33470447 999416 82 Linux swap / Solaris /dev/sda3 33472512 62539775 14533632 83 Linux /dev/sda4 62541045 312592769 125025862+ f W95 Ext'd (LBA) /dev/sda5 62541108 125066024 31262458+ 7 HPFS/NTFS/exFAT /dev/sda6 125066088 187591004 31262458+ 7 HPFS/NTFS/exFAT /dev/sda7 187591068 250115984 31262458+ 7 HPFS/NTFS/exFAT /dev/sda8 250116048 312576704 31230328+ 7 HPFS/NTFS/exFAT swapon --all swapon: /dev/sda2: swapon failed: Invalid argument dmesg | grep -A 5 -B 5 -i swap [ 9.487404] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131645 [ 9.487413] EXT4-fs (sda3): ext4_orphan_cleanup: deleting unreferenced inode 131330 [ 9.487418] EXT4-fs (sda3): 16 orphan inodes deleted [ 9.487420] EXT4-fs (sda3): recovery complete [ 9.578600] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 20.580539] Swap area shorter than signature indicates [ 20.588363] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.619443] udevd[330]: starting version 175 [ 20.649959] lp: driver loaded but no devices found [ 20.662972] [drm] Initialized drm 1.1.0 20060810 [ 20.675515] i915 0000:00:02.0: setting latency timer to 64 -- [ 72.288573] PM: thaw of drv:sr dev:3:0:0:0 complete after 178.143 msecs [ 72.288578] PM: thaw of drv:scsi_device dev:3:0:0:0 complete after 178.136 msecs [ 72.299677] PM: thaw of drv:scsi_device dev:2:0:0:0 complete after 189.270 msecs [ 72.309473] PM: thaw of devices complete after 202.763 msecs [ 72.309668] PM: writing image. [ 72.309670] PM: Cannot find swap device, try swapon -a. [ 72.309699] PM: Cannot get swap writer [ 72.329896] Restarting tasks ... done. [ 72.331777] PM: Basic memory bitmaps freed [ 72.331792] video LNXVIDEO:00: Restoring backlight state [ 72.420048] option1 ttyUSB0: option_instat_callback: error -84 [ 72.804047] option1 ttyUSB0: option_instat_callback: error -84 -- [ 145.960625] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 145.972036] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 172.430508] PPP BSD Compression module registered [ 172.455583] PPP Deflate Compression module registered [ 332.260789] type=1400 audit(1381814763.342:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 1913.030998] Swap area shorter than signature indicates [ 2022.530155] type=1400 audit(1381816453.610:28): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=636 comm="cupsd" pid=636 comm="cupsd" capability=36 capname="block_suspend" [ 4062.729509] Swap area shorter than signature indicates Please help. Thanks in advance. df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 14G 6.1G 7.0G 47% / udev 488M 4.0K 488M 1% /dev tmpfs 199M 868K 198M 1% /run none 5.0M 4.0K 5.0M 1% /run/lock none 496M 224K 496M 1% /run/shm

  Read the article

• Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

  - by cpm

  I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

  Read the article

• Xinerama creates a panning viewport

  - by iblue

  EDIT: I've created a bug report: https://bugs.freedesktop.org/show_bug.cgi?id=48458 My Setup I have 4 monitors, 1920x1080, which are in portrait mode (rotated left). They are connected to two radeon graphic cards. As usual, a picture says more than a thousand words. The problem Everything works fine, when Xinerama is disabled. But when I enable Xinerama, things get weird. When I move the mouse of the screen and return, the screen contents begin to move with the mouse, only on this monitor. It seems like the virtual display size does not match the real screen size, which activates a panning viewport. Any idea how to stop this? The video I created a video to demonstrate the issue: http://www.youtube.com/watch?v=zq_XHji1P24 xorg.conf This is my xorg.conf: Section "ServerLayout" ##################[ Evilness begins here ]############# Option "Xinerama" "on" # <--- Makes it go b0rked! ##################[ End of all evil ]############# Identifier "BOFH Console of Doom" Screen 0 "Screen-0" 0 0 Screen 1 "Screen-1" RightOf "Screen-0" Screen 2 "Screen-2" RightOf "Screen-1" Screen 3 "Screen-3" RightOf "Screen-2" EndSection Section "ServerFlags" Option "RandR" "false" EndSection Section "Module" Load "dbe" Load "dri" Load "extmod" Load "dri2" Load "record" Load "glx" EndSection Section "Monitor" Identifier "Monitor-0" Option "Rotate" "left" EndSection Section "Monitor" Identifier "Monitor-1" Option "Rotate" "left" EndSection Section "Monitor" Identifier "Monitor-2" Option "Rotate" "left" EndSection Section "Monitor" Identifier "Monitor-3" Option "Rotate" "left" EndSection Section "Device" Identifier "Radeon-0-0" Driver "radeon" BusID "PCI:9:0:0" Option "ZaphodHeads" "DVI-0" Screen 0 EndSection Section "Device" Identifier "Radeon-0-1" Driver "radeon" BusID "PCI:9:0:0" Option "ZaphodHeads" "DVI-1" Screen 1 EndSection Section "Device" Identifier "Radeon-1-0" Driver "radeon" BusID "PCI:4:0:0" Option "ZaphodHeads" "DVI-2" Screen 0 EndSection Section "Device" Identifier "Radeon-1-1" Driver "radeon" BusID "PCI:4:0:0" Option "ZaphodHeads" "DVI-3" Screen 1 EndSection Section "Screen" Identifier "Screen-0" Device "Radeon-0-0" Monitor "Monitor-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen-1" Device "Radeon-0-1" Monitor "Monitor-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen-2" Device "Radeon-1-0" Monitor "Monitor-2" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen-3" Device "Radeon-1-1" Monitor "Monitor-3" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

  - by cpm

  I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

  Read the article

• Load a png resource into a CBitMap

  - by Rohit Sasikumar

  How do i load a png resource into a CBitMap? When i try this it doesnt work. CImage image; image.LoadFromResource(AfxGetInstanceHandle(), IDB_PNG1); bitmap.Attach(image.Detach()); It gives me an error resource type not found. Is there any other way to load a PNG resource?

  Read the article

• Programmatically modifying an embedded resource before registering/referencing it on the page

  - by Jimock

  Hi All, Firstly, "Modifying" may be the wrong term, I see a few people have posted online just asking whether they can actually modify an embedded resource. What I am wanting to to, is use a resource in my assembly as a kind of template which I would do a find and replace on before registering it on the page - is this possible? For example; say I have a few lines of jQuery as an embedded resource in my assembly and in this script I am referencing a CSS class name that can be set by the front-end programmer. Since I do not know what the CSS class will be until implementation, is there a way of going through the embedded resource and replacing, say, $myclass$ with ThisClassName. Any help would be appreciated, if it's not possible then at least tell me so I can stop chasing my tail. Cheers, James

  Read the article

• Strange VS2005 compile errors: unable to locate resource file (because the compiler keeps deleting i

  - by Velika

  I AM GETTING THE FOLLOWING ERROR IN A VERY SIMPLE CLASS LIBRARY: Error 1 Unable to copy file "obj\Debug\SMIT.SysAdmin.BusinessLayer.Resources.resources" to "obj\Debug\SMIT.SysAdmin.BusinessLayer.SMIT.SysAdmin.BusinessLayer.Resources.resources". Could not find file 'obj\Debug\SMIT.SysAdmin.BusinessLayer.Resources.resources'. SMIT.SysAdmin.BusinessLayer Going to the Project Properties-Resource tab, I see that I defined do resources. Still, I tried to delete the resource file and recreate by going to the resource tab. When I recompile, I still get the same error. Why is it even looking for a resource file? I define no resources on teh project properties tab and added no new resource file items. Any suggestions of things to try? Update: I found the missing file in an old backup. I copied it to the location where the compiler expected it, and then successfully recompiled the project that previously had compile time errors. However, when I rebuild the entire solution, it deletes the file that I previously restored and I'm back to where I started. My solution contains several projects (maybe 10 or so). Could VS 2005 be having a problem determining dependencies and the proper order to compile these projects?

  Read the article

• Android - Convert Color Resource to Color in Domain Object

  - by Steve

  I have a domain object, where I created a method to return a text color based on the internal state of the domain object. I have defined the colors in a color.xml file as resources. The problem I have now, is that I would like to return a Color object instead of a resource ID from the domain object method. This way I can set the text color of a TextView by just calling textView.setTextColor(domainObj.getTextColor()) since it expects a Color object and not a resource ID. Currently, in an Activity, I can call getResources().getColor(domainObj.getTextColorResource()) to convert a resource ID to a color, but I would like this done in the domain object and I am not sure how I would do this when I do not have access to the getResources method. Are there any cleaner options than passing in a Resource object into the method, or domain object? Thanks

  Read the article

• Managing resource closure in a servlet container

  - by Steven Schlansker

  I'm using Tomcat as a servlet container, and have many WARs deployed. Many of the WARs share common base classes, which are replicated in each context due to the different classloaders, etc. How can I ensure resource cleanup on context destruction, without hooking each and every web.xml file to add context listeners? Ideally, I'd like something along the lines of class MyResourceHolder implements SomeListenerInterface { private SomeResource resource; { SomeContextThingie.registerDestructionListener(this); } public void onDestroy() { resource.close(); } } I could put something in each web.xml, but since there are potentially many WARs and only ones that actually initialize the resource need to clean it up, it seems more natural to register for cleanup when the resource is initialized rather than duplicating a lot of XML configuration and then maybe cleaning up. (In this particular case, I'm initiating an orderly shutdown of a SQL connection pool. But I see this being useful in many other situations as well...) I'm sure there's some blisteringly obvious solution out there, but my Google-fu is failing me right now. Thanks!

  Read the article

• Ant 1.8 include or import with nested resource collection

  - by Danny

  I'd like to have Ant automatically include or import resources matching a particular pattern, but I'm really struggling with the syntax. Here's what I've tried: <import> <fileset dir="${basedir}" includes="*-graph.xml" /> </import> However, I just get the error message import requires file attribute or at least one nested resource The documentation for import (and include) both say that you can use a nested resource collection, and the documentation for resource collections says <fileset> is a resource collection. I've Googled and can't find any useful examples at all. I'm using Ant 1.8.1 (verified with ant -version)

  Read the article

• Monitor and Terminate Python script based on system resource use

  - by Vincent

  What is the "right" or "best" way to monitor the system resources a python script is using and terminate it if the resource use exceeds some predetermined values. In my case memory usage is of concern. I am not asking how to measure the system resource use although I am open to suggestions. As a simple example, let's assume I have a function that finds prime numbers less than some large number and adds them to a list based on some condition. I don't know ahead of time how many prime numbers will satisfy the condition so I what to be sure to terminate the function if I use up to much system memory (8gb lets say). I know that there are ways to monitor the size of python objects. What I don't know is the proper way to monitor the size of the list and exit is to just include a size test in the prime function loop and exit if it exceeds 8gb or if there is an "external" way to monitor and exit.

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >