Search Results

Search found 15913 results on 637 pages for 'screen'.

Page 30/637 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• How do I improve my screen resolution in Windows Remote Desktop?

  - by Jeff

  I'm RDP'ing into a Win2K3 machine from a WinXP machine, and I cannot stand the low screen resolution I get on the Win2K3 box. Text is too large and the graphics/colors aren't very smooth. How do I improve this? If I right-click on the desktop of the remote machine and go to Properties - Settings, I see that the screen resolution is set to 1280x1024 (should be okay, I would think), and the color quality is Medium (16 bit) (not optimal) and I don't have the option to change either setting (because they're set in the .rdp file for the session, right?). If I move over to the Appearance tab, I see that font size is set to Normal, with no option to make it smaller. The thing is, these settings are close to what I have on the XP machine I'm RDP'ing in from. The only difference (in those settings) is the color quality, which is 32 bit. Any ideas on how I can improve the situation? Other tidbits: The graphics card on the Win2K3 machine is ATI ES1000. I think I have the latest drivers for it. I'm running VMware Workstation on the Win2K3 machine, and if I create a Win2K3 VM and RDP into it from the XP machine, the resolution is just fine.

  Read the article

• compatible laptop screens for dv6-1050us

  - by eran

  i have a laptop with 16'' wide screen, but the screen is broken and i want to buy only the screen and replace it.. my laptop is: HP Pavilion dv6-1050us what i know about the screen is that it's model number 512357-001 "16inch widescreen BrightView BV display panel IMR, with web camera and microphone". I did find some screen which seems to be the one but i'm not sure and dont want to spend money for the wrong screen, can any one help please? I search on e-bay for a compatible screen and left with a few questions.. There are some sceens which can be compatible.. they dont mention the specific computer models compatibles.. is all dv6-1000 of hp has the same screen?are all of them compatible? thanks for you help Eran

  Read the article

• Ubuntu 12.10 Screensaver/blanking problem

  - by Ramon J. Strauff

  I have upgraded to 12.10 and then downgraded again to 12.04 LTS because of the screensaver or screen blanking problem. After 10-12 minutes the screen goes black/blank when i dont do anything (idle). I have tried setting in the Brightness and Lock menu that the screen should never lock or turn off if idle. This is very annoying when watching movies etc... Would be nice if someone knows this.... Thanks...

  Read the article

• ScreenShare: command line and observe only.

  - by Shyam

  Hi, I have a wide TV screen that is attached to a Mac Mini. I am able to use this screen as a second screen using an application like ScreenRecycler. However, Sometimes I want to demonstrate what I am doing on my box on this TV screen. As this TV is attached to a Mac Mini, I want to have a screen sharing done reversed. As I know screen share can be done in observe mode and full screen, this would be more than sufficient. Because it would be pretty useless to run it continuously, I want it on demand. For this, I want to use SSH. So the only thing I would like to know is, how do I start screen sharing in from a Terminal Session. On Windows, I could start an application by using "start notepad.exe", I am looking for something similar. Eventually, I want to make this work on other boxes too. Thanks for your help!

  Read the article

• Unity Greeter login screen cuts off login options

  - by ammianus

  I have a pretty newly installed Ubuntu 12.04, using Unity. My external monitor is 1920x1080 max resolution. In the Unity desktop itself everything looks great. I have an NVidia graphics card. When I start my computer and get to the Unity greeter login screen the display is oddly formatted and the resolution seems off. It looks like a zoomed view on the larger 1920x1080 screen. As such it crops the login options off to the left hand side of the screen. So I can only just see the edge of the password box for the user I want to log in with. I can log in with one account by default by blindly typing the password, but I am unable to switch to other accounts. Is there anything I can do to fix the log in screen display so that I can see the normal login options? Note: I first noticed it when I changed my desktop background and the next time I logged in I saw the issue.

  Read the article

• Simple monitoring of a Raspberry Pi powered screen - Part 2

  - by Chris Houston

  If you have read my previous blog post Raspberry Pi entrance signed backed by Umbraco - Part 1 which describes how we used a Raspberry Pi to drive an Entrance sign for QV Offices you will have seen I mentioned a follow up post about monitoring the sign.As the sign is mounted in the entrance of the building on the ground floor and the reception is on the 1st floor, this meant that if there was a fault of any kind showing on the screen, the first person to see this was inevitably one of QV Offices' clients as they walked into the building.Although the QV Offices' team were able to check the Umbraco website address that the sign uses, this did not always mean that everything was working as expected. We noticed a couple of times that the sign had Wifi issues (it is now hard wired) and this caused the Chromium browser to render a 404 error when it tried to refresh the screen.The simple monitoring solutionWe added the following line to our refresh script, so that after the sign had been refreshed a screen shot of the Raspberry Pi would be taken:import -display :0 -window root ~/screenshot.jpgFinally we wrote a small Crontab task that ran on a QV Offices Mac that grabs this screen shot and saved it on the desktop, admittedly we have used a package that it not mega secure, but in reality this is an internal system that only runs an office sign, so we are not to concerned about it being hacked.*/5 * * * * /usr/local/bin/sshpass -p 'password' /usr/bin/scp [email protected]:screenshot.jpg Desktop/QVScreenShot.jpgAs the file icon updates, if the image changes, this gives a quick visual indication of the status of the sign, if for some reason the icon does not look correct the QV Offices administrator can just click on the file to see the exact image currently displayed on the sign.Sometimes a quick and easy solution is better than a more complex and expensive one.

  Read the article

• Blank Screen after inactive time

  - by Hari K T

  I am using Ubuntu 11.04 , on a DELL Vostro 1510. If I am inactive for a certain time, the screen usually gets locked and the login prompt will be there. Yes sometimes I am able to see the login screen and logging in as normal. But sometimes after its locked and when the mouse or keyboard is moved also nothing happens. This is happening for the second time. And its not happening always . I can switch from one terminal to other from the locked screen with Alt + + Ctrl F1 etc . But when I switch to the graphical one with Alt + Ctrl + F7 ( from the locked time ) I can see only a blank screen. I tried once login in ( Alt + Ctrl + F1 ) and trying to startx, but it said something was locked and want to delete the lock and try. So I removed don't remember what exactly it was . But it too was not a success , I was forced to press the powerbutton. Is this a bug ? I saw some but all are happening for switching users. Never experienced after logging out, but this happens only when its locked automatically actually. Update : I strongly feel this is a Bug. As I upgraded to 11.10 , I didn't noticed the same issues. But at some point if any one has an answer, you can post it. I can approve.

  Read the article

• Change X settings to boot into laptop with non working screen using an external monitor

  - by dassouki

  My laptop committed suicide. Is there a way I can boot into my ubuntu using an external screen? Ubuntu 10.10 video: Nvidia 9500 gm i think I can get dual screen upto and until the ubuntu login screen at which point it goes back into laptop display only. Then I can just type and enter my password. The system (i assume boots into ubuntu) but I got no way of going onto the x or nvidia settings to change my display to external monitor EDIT well I booted into terminal using control shift F1 i think, and now I'm trying to reporgram x.org, but strangely it seems bland with not a lot of settings in it EDIT 2 xrandr returns "Can't open display" EDit 3 after some messing around with xrandr and xinit ... my x.org only displays one monitor instead of two in its settings although both, i.e. the laptop and external screens are both connected. EDIT 4 it seems that x.org now has a "screen" and "monitor" section, I can't seem to be able to boot linux into monitor. I get a "Monitor is not a valid keyword" in this subsection

  Read the article

• Setting Krypton Light to Screen Pixels

  - by Adam Jerrett

  So a few days back, I started playing around with Krypton XNA for 2D lighting in my game. I noticed in general, that spawning a light at (0,0) with Krypton causes the light to appear in, pretty much, the centre of the game screen. Is there any way to change this so a Krypton light's "starting point" at [0,0] would spawn at the top left of the screen, and thus follow the standard screen co-ordinates for position? I ask because currently I'm busy working on my game where my spawn point is [512,512]. With hard code, the closest I've got to the light being "central" to this point is the vector position [12,-20], which makes no sense and is impossible to craft, mathematically, if I want the light to move with the camera (the position [480,512] maps roughly to [10,-20]). So, is there any way to "normalise" the krypton lights to use standard screen co-ordinates? If you guys can, play around with the demo from the site and please see if you can find anything out about it. Documentation on the engine is rather scarce, so it's difficult to find anything relevant to my "pixel-perfect" need. It might just also be something in the code with regards to the matrices that I'm not fully understanding. Any help would be useful. Thanks.

  Read the article

• 2560 x 1600 screen resolution not available when a second monitor is attached.

  - by sgmoore

  I am running Windows 7 (64-bit edition) and have a 30" Dell 3007WFP monitor which runs at a screen resolution of 2560 x 1600. This works perfectly until I try to connect a second monitor, and then the screen resolution on the main monitor immediately drops to 1280x800 and I can't change it back up to the correct resolution until I disconnect the second monitor. The graphics card is a Nvidia Quadro FX 370. This has a dual link DVI connector (to which the 30" is connected) and a single link DVI connector. The second monitor can run at 1920x1080 and is connected using a VGA to DVI connector. Note, it does not seem to matter whether the second monitor is running at 1920x1080 or even at 800x600. Windows reports Total Available Graphics Memory: 3839MB Dedicated Video Memory: 256MB System Video Memory: 0MB Shared System Memory: 3583MB Does anyone know if this a limitation with the video card, memory, drivers, connectors or something else? If this is a limitation with the video card, can anyone recommend a PCI Express 16 card that would support at least this setup, but preferably support two 30" monitors both running 2560 x 1600. (I'm not into gaming etc, so it doesn't need to be very powerful)

  Read the article

• dual monitors and unity - ati radeon cards

  - by michiel

  I have a vaio laptop with an ATI Radeon video card and an external screen. I used to run dual monitors on Ubuntu 10.10 fine, but recently decided to upgrade to 11.10 via 11.04 I don't think it's the video card or the fglrx driver. It seems to be unity. When I start up, the laptop screen is normal and the external screen is all white, although I can move my mouse over it. However, the cursor becomes the big X that used to be cursor of the first versions of Xwindows. I can right click on it, and it brings up the context menu for the desktop. And then, all of a sudden, it shows my desktop background. I can continue to move my mouse over the external screen, and now the cursor is normal (little white arrow). But I can't do anything any longer (not even the context menu as before), and trying to drag a window to it (which always worked on 10.10) doesn't work. I actually really like unity. It gives me the most our of my desktop, and uses all space available, which is great. But how can I get my second screen back? I tried unity 2D, but the result is the same. Edit: I think I stumbled on this bug: https://bugs.launchpad.net/ubuntu/+source/nvidia-settings/+bug/882143

  Read the article

• Greeter login screen cropped login options in 12.04

  - by ammianus

  I have a pretty newly installed Ubuntu 12.04, using Unity. My external monitor is 1920x1080 max resolution. In the Unity desktop itself everything looks great. I have an NVidia graphics card. When I start my computer and get to the Unity greeter login screen the display is oddly formatted and the resolution seems off. It looks like a zoomed view on the larger 1920x1080 screen. As such it crops the login options off to the left hand side of the screen. So I can only just see the edge of the password box for the user I want to log in with. I can log in with one account by default by blindly typing the password, but I am unable to switch to other accounts. Is there anything I can do to fix the log in screen display so that I can see the normal login options? Note: I first noticed it when I changed my desktop background and the next time I logged in I saw the issue.

  Read the article

• Ubuntu 13.10, kernel 3.11 blank screen issue with hybrid graphics

  - by Lagerbaer

  On my HP Envy, which has both an Intel on-chip graphics card and an Nvidia Geforce: *-display UNCLAIMED description: 3D controller product: GK208M [GeForce GT 740M] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: cap_list configuration: latency=0 resources: memory:d2000000-d2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:5000(size=128) memory:b2000000-b207ffff *-display description: VGA compatible controller product: 4th Gen Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 06 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:d3000000-d33fffff memory:c0000000-cfffffff ioport:6000(size=64) I have trouble with all newer kernels. I basically had to install 12.04 LTS and use their 3.5 kernel family to get the system to boot. The 3.8 from 12.10 or the newest 3.11 from Ubuntu 13.10 leave me with a black screen upon boot. On one occasion I did hear the "log in" sound, but the screen did not display anything. I have purged all nvidia drivers so I guess it should just use the intel drivers, but apparently this is all messed up with newer kernel versions. This is different from the other "nvidia boots into blank screen" bug in that I don't rely solely on an nvidia card. Surely the intel on-chip card should be supported and leave me with something different from a blank screen? Again, it only works with kernel versions 3.5.0-41-generic, not with the 3.11.0-12 one that ships with Ubuntu 13.10. When I go into the grub menu and change the boot options from 'quiet splash' to 'nomodeset' I am able to boot the system, but then I don't get any graphics and trying 'sudo service lightdm start' doesn't succeed (I get 100% CPU for apport, but this doesn't do anything either, so I kill it). Help, I'm all out of ideas. EDIT: Let me add that I'm using the EFI boot system and have a dual-boot installation with Windows 8.

  Read the article

• Cannot boot normally, without restarting lightdm (or gdm)

  - by leventov

  I had a problem precisely described here: http://www.webupd8.org/2013/01/ubuntu-lightdm-black-screen-when-using.html, black screen with blinking cursor instead of login screen. I've switched to gdm using sudo dpkg-reconfigure gdm -- but faced the same problem, now loading process stops on "red-white Ubuntu dots" (without activity under this splash). And to login, I still need to restart display manager: Ctrl+Alt+F1 and sudo service gdm restart. How to make Ubuntu to boot normally?

  Read the article

• Couldn't pass the signin screen on ubuntu

  - by Amokrane

  I have an issue here with my computer using ubuntu 10.10 on a 64 bits machine. When I start it, I have the login screen, I enter my credentials but instead of starting the session it reloads the login screen again. I checked the disc using fsck and it seems clean. How should I proceed to diagnose and repair this issue? Thanks! [Edit] I went to the log files, this is what I got: auth.log pam_unix (gdm:session): session opened for user amokrane by (uid=0) pam_ck_connector (gdm:session): nox11 mode, ignoring PAM_TTY :0 pam_unix (gdm:session) :session closed for user amokrane messages.log No ACPI video bus found I also took a shot with my camera of the black screen that appears between the two login screens, it says something like: fsck from util-linux-ng 2.17.2 /dev/sdc4 : propre, xxxx files, xxxx blocs Starting AppArmor profiles Skipping profiles in /etc/apparmor.d/disable: usr.bin.firefox Setting sensors limits Starting postgreSQL ... /var/log/Xorg.0.log [ 25.375] (II) intel(0): Modeline "1920x1080"x60.0 172.80 ... [ 28.850] (II) Power Button: Close [ 28.850] (II) UnloadModule: "evdev" [ 29.910] (II) Power Button: Close [ 28.910] (II) UnloadModule: "evdev" [ 28.941] (II) AT Translated Set 2 keyboard: Close [ 29.000] (II) ImPS/2 Generic Wheel Mouse: Close [ 29.000] (II) UnloadModule: "evdev" [ 29.039] ddxSigGiveUp: Closing log Update I tried the following: Ctrl-Alt-F1 on the login screen (to runt the console). sudo pkill startx sudo rm /tmp/.X0-locl startx But it tells me that the x server is already running.

  Read the article

• xubuntu 12.04 screen regularly stops refreshing, refreshing resumes after un-/re-maximizing a window

  - by user68477

  My screen frequently stops completely refreshing. I can make it resume refreshing by un-maximizing/re-maximize a window or by switching workspace (the un-/re-maximizing works every time. Switching workspace sometimes has to be done a couple of times). The immediate impression is that the system is frozen: there is apparently no reaction to anything I do but interestingly window title bar will change, if I switch application with (i.e alt+tab or browse through folders) I saw an identical issue in ubuntu 10.04, though a lot less frequent, I never saw this in ubuntu 12.04 (which I have been using the last 4-5 months). After switching to Xubuntu I'm seeing this again and more frequently. The specific reason I'm not sure this is a bug: I installed gnome-control-center which dragged in tons of packages. This was while trying to fix dual-screen setup. I believe the issue surfaced after this. I later meticulously removed every package from this batch (purge) in the hope that every setting would also be removed. But the issue has persisted. Another issue happened at the same time, it may be totally unrelated but it feels as if it is the same basic issue: the screen resolution of the greeter became less than the expected 1680x1050 and often after login there's just a blank and totally unresponsive wallpaper without panel so I have to force reboot. When the login is successful it's very clear that it works hard to determine the correct resolution which is achieved after a few blink to black screens. My questions: 1) Is this a settings issue or a bug? 2) How do I begin to research the issue - could I perhaps some way reset xubuntu/xfce to default. 3) If this is a bug where would be the most appropriate place report this? System: Thinkpad T500 ati radeon HD 3650 $ fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 3650 OpenGL version string: 3.3.11627 Compatibility Profile Context $ uname -a Linux srvname 3.2.0-32-generic #51-Ubuntu SMP Wed Sep 26 21:33:09 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux xfce 4.10 Compiz 0.9.7.8

  Read the article

• Ubuntu black screen after Installation of 12.10 Live USB

  - by Lime0fHint

  My computer was made in 2004, but I'm sure it doesn't matter since it's a durable machine. So recently, I decided to breathe new life to it with Linux. I tried Lubuntu 12.10, Nope. Black screen after install. So I tried Ubuntu 12.10 when I gave up, and same exact thing. Except, this time I'm fighting for it, since Ubuntu is the best OS I've ever seen. So back on-topic, when I start the installation, it says that something is already mounted (Sda or something of the sorts) So I just figure that it's the Live USB I'm using. So I let it ignore it, and move on. The rest of the installation goes smooth, all looks fine. Then I get to the screen with the introductory to Ubuntu. Meanwhile, it's still installing, but finishing up. I'm not sure if the install actually finishes, but I do know that after a bit, the screen goes back to the desktop. The install closes and I'm back at the desktop, and the cursor is showing the "loading" symbol, as if it were still working. Then the screen goes black, with the same cursor. After that, nothing. I left it over night like that thinking it was doing something, in the morning it was still black with the cursor circling or whatever. So what could be causing this? One concern I have is that I have a Nvidia graphics card (7300 GT). I heard that Nvidia isn't compatible with Linux? I did notice that it was marked as unreconigsed by Ubuntu, so is that the problem perhaps?

  Read the article

• Ubuntu 12.04 Full Screen without Unity Hub

  - by Xatolos

  I couldn't find an answer for this, so I thought I would try here. My problem is, I have some games on Wine that play in full screen mode but I can't really get them in full screen mode. When they start up, they end up with the GUI's "HUD" overlapping the game which is really annoying and well kills the option to play the game. This has also happened in a few of my Linux programs as well. While I wrote its a problem with Unity, it really isn't limited to this though. I've done full screen mode on Unity and had the Unity side bar and top menu overlap, I've used Gnome and had the same issue happen, Gnome menu is in the top, Cinnamon had the same issue. Sometimes if I Alt-Tab out of it and back into the program it MIGHT remove the HUD but that doesn't always work, and lets face it, full screen mode that is killed by the GUI just isn't something that can really be ignored. Any suggestions or help would be highly welcomed. My laptop http://www.cnet.com/laptops/asus-g53jw-a1-15/4507-3121_7-34210244.html edit Seems so far to be an issue with Unity and Gnome being in 3D mode, and possibly an issue with my NVidia card and XServe (I think that was it...). Going to Unity/Gnome 2d modes seem to help with this for the moment...

  Read the article

• Xubuntu 14.04, Power Manager, Screensaver

  - by Bathynomus

  When my computer is inactive, I keep getting a black screen and the screen goes into locked mode asking for a password, even though in Power Manager I have "Never" set for actions and monitor and Extended "Lock Screen" is unchecked. I don't see a screensaver, but perhaps that is the issue? Is anyone else experiencing this? Is this a bug? Is there a temporary workaround? I did not see this issue in 12.xx, 13.xx.

  Read the article

• Personal Technology – Laptop Screen Blank – No Post – No BIOS – No Boot

  - by Pinal Dave

  If your laptop Screen is Blank and there is no POST, BIOS or boot, you can follow the steps mentioned here and there are chances that it will work if there is no hardware failure inside. Step 1: Remove the power cord from the laptop Step 2: Remove the battery from the laptop Step 3: Hold power button (keep it pressed) for almost 60 seconds Step 4: Plug power back in laptop Step 5: Start computer and it should just start normally. Step 6: Now shut down Step 7: Insert the battery back in the laptop Step 8: Start laptop again and it should work Note 1: If your laptop does not work after inserting back the memory. Remove the memory and repeat above process. Do not insert the battery back as it is malfunctioning. Note 2: If your screen is faulty or have issues with your hardware (motherboard, screen or anything else) this method will not fix your computer. Those, who care about how I come up with this not SQL related blog post, here is the very funny true story. If you are a married man, you will know what I am going to describe next. May be you have faced the same situation or at least you feel and understand my situation. My wife’s computer suddenly stops working when she was searching for my daughter’s mathematics worksheets online. While the fatal accident happened with my wife’s computer (which was my loyal computer for over 4 years before she got it), I was working in my home office, fixing a high priority issue (live order’s database was corrupted) with one of the largest eCommerce websites.  While I was working on production server where I was fixing database corruption, my wife ran to my home office. Here is how the conversation went: Wife: This computer does not work. I: Restart it. Wife: It does not start. I: What did you do with it? Wife: Nothing, it just stopped working. I: Okey, I will look into it later, working on the very urgent issue. Wife: I was printing my daughter’s worksheet. I: Hm.. Okey. Wife: It was the mathematics worksheet, which you promised you will teach but you never get around to do it, so I am doing it myself. I: Thanks. I appreciate it. I am very busy with this issue as million dollar transaction are not happening as the database got corrupted and … Wife: So what … umm… You mean to say that you care about this customer more than your daughter. You know she got A+ in every other class but in mathematics she got only A. She missed that extra credit question. I: She is only 4, it is okay. Wife: She is 4.5 years old not 4. So you are not going to fix this computer which does not start at all. I think our daughter next time will even get lower grades as her dad is busy fixing something. I: Alright, I give up bring me that computer. Our daughter who was listening everything so far she finally decided to speak up. Daughter: Dad, it is a laptop not computer. I: Yes, sweety get that laptop here and your dad is going to fix the this small issue of million dollar issue later on. I decided to pay attention to my wife’s computer. She was right. No matter what I do, it will not boot up, it will not start, no BIOS, no POST screen. The computer starts for a second but nothing comes up on the screen. The light indicating hard drive comes up for a second and goes off. Nothing happens. I removed every single USB drive from the laptop but it still would not start. It was indeed no fun for me. Finally I remember my days when I was not married and used to study in University of Southern California, Los Angeles. I remembered that I used to have very old second (or maybe third or fourth) hand computer with me. In polite words, I had pre-owned computer and it used to face very similar issues again and again. I had small routine I used to follow to fix my old computer and I had decided to follow the same steps again with this computer. Step 1: Remove the power cord from the laptop Step 2: Remove the battery from the laptop Step 3: Hold power button (keep it pressed) for almost 60 seconds Step 4: Plug power back in laptop Step 5: Start computer and it should just start normally. Step 6: Now shut down Step 7: Insert the battery back in the laptop Step 8: Start laptop again and it should work Note 1: If your laptop does not work after inserting back the memory. Remove the memory and repeat above process. Do not insert the battery back as it is malfunctioning. Note 2: If your screen is faulty or have issues with your hardware (motherboard, screen or anything else) this method will not fix your computer. Once I followed above process, her computer worked. I was very delighted, that now I can go back to solving the problem where millions of transactions were waiting as I was fixing corrupted database and it the current state of the database was in emergency mode. Once I fixed the computer, I looked at my wife and asked. I: Well, now this laptop is back online, can I get guaranteed that she will get A+ in mathematics in this week’s quiz? Wife: Sure, I promise. I: Fantastic. After saying that I started to look at my database corruption and my wife interrupted me again. Wife: Btw, I forgot to tell you. Our daughter had got A in mathematics last week but she had another quiz today and she already have received A+ there. I kept my promise. I looked at her and she started to walk outside room, before I say anything my phone rang. DBA from eCommerce company had called me, as he was wondering why there is no activity from my side in last 10 minutes. DBA: Hey bud, are you still connected. I see um… no activity in last 10 minutes. I: Oh, well, I was just saving the world. I am back now. After two hours I had fixed the database corruption and everything was normal. I was outsmarted by my wife but honestly I still respect and love her the same as she is the one who spends countless hours with our daughter so she does not miss me and I can continue writing blogs and keep on doing technology evangelism. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Humor, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• my laptop ibm thinkpad x32 showing black screen after booting

  - by forweb

  Thanks in advance. Well i have a laptop of IBM thinkpad x32. Windowx xp installed. So, the problem is that: The basic problem is the Black Screen but it's not means that laptop doesn't power-up or boot-up, sometimes after booting, screen will off and notable thing is that after black screen computer is still running all keyboard lights are on, and when i tried to again start it, it will boot ok but after some time screen will gone, and sometimes this happens during booting screen, even sometimes screen black out at win XP user login page, means after some seconds or min screen will gone. Hope you can understand my problem

  Read the article

• T60 Screen/LCD gets black after some minutes with a highpitched sound rising and fading

  - by edelwater

  Just now my T60 screen got "black" (so no display). On my second monitor: no problems so the VGA output works. Symptom: Screen blanks / no display, but it works on the second monitor Steps to reproduce: - boot - wait (it does not matter what you do you do not have to login or anything) - (now the monitor of the laptop slowly begins to make a ssssssssHHHHHHHHHHHHHHHHHWOEOEssssssss noise of about 10 seconds) - right after the sounds ends, the monitor gets black. Sometimes it seems to be the same each time. Software: Installed no new software before/after, running ZoneAlarm and antivirus. Other: It does not feel hot in any place, there don't seem to be running processes with strange behaviour. Warranty: Out of warranty What was I doing: Typing text on a website and doing some PHP coding in a text editor. What can I do here other than buy a new laptop? Does it sound familiar to known cases? Update 1: Exactly the same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-Screen-Blackout/m-p/288772 and the second poster (garyj), http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/Black-Screen-on-T60/m-p/235053#M48627 And here: "I have that same problem. I replaced the CCRL on mine and it works fine when the screen is not screwed in. Once the frame of the LCD screen (metal portion) touches the metal on the laptop which holds the screen the screen goes black. If the metal is touching the screen when you boot up it boots up with it being very dimmly lit. " from http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-screen-problems/m-p/205047#M44995 (it seems replacing the LCD display is no use, he tried it three times). Same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-black-screen/m-p/80604#M25914 Hmmm... not handy 3 or 4 months ago I ordered and installed a new fan. Now the LCD. Which does not seem the core issue but some electric issue so it seems replacing the LCD is not the thing to do here. If it is not the LCD that needs to be replaced (see other threads), which parts can I order to fix this? Is there any information which could lead me to identify the issue? I have read replacing the "inverter" AND the "backlightning" would that make sense? Update 2: I replaced the inverter with another inverter, but IO have the same problem. I DID notice that the inverter is the component that makes the sssssssssssssHHHHHHHHHH sound AND it becomes very hot in a few seconds. (So both the old and the test one) The problem is hmmm wat is then the thing that makes the inverter hot by (assumption) after which it shuts itself down. Is it either the input or the output? The output seems to me not, because the screen seems to function so it must be the electricity coming in. But what causes it to become so hot would it be the VGA card outputting some unusual high voltage seems unlikely? I am looking for the component to order / replace update 3: Great news. Ewendish gave me the hint to look in the BIOS. While I was in the BIOS I noticed that the screen did not switch off and there was not a high pitched sound. So I lowered some settings in the BIOS. I then noticed that with brightness turned to 0 (via FN End), it does not make a high pitched sound and does not turn off, with brightness turned up just three "stripes" it starts making the sound. So I could from now on work under lowest brightness modus or... see where the problem lies. So as stated below with either power management or display drivers / ATI Catalyst settings / Windows display settings. I'm trying to see where it lies, but I will google some first. Update 4: I wiped clean the Windows XP installation and installed Windows 7 on it. Unfortunately the problem remains: as soon as the brightness goes up the screen starts hissing. This means... back to original thought: it probably IS a hardware problem. Although ... again... if it is NOT the inverter, what is it? Could it be the backlightning component? I could try to switch that with a another T60... but this is quite tricky.

  Read the article

• How to eliminate screen jitter in Flash game?

  - by Huang F. Lei

  We made a flash game with a big screen size(1000x600), and the terrain graphic will jitter while the screen scrolling(that's, camera moving with player) continuously. What's the root cause? Or if you know how to eliminate this problem, please tell me. Any help is appreciated. UPDATE: The map's size is more bigger than screen, e.g 6000x1200. And the map has more than one layer, generally it has 3 layers. Terrain is composed by tiles. And FPS is 24. If the FPS is set to 60, things will be better. But any way, it should work well at 24 FPS. I'm not sure if it is a natural problem of flash player, because some times a terrain object(e.g a house) look like a little bit distorted.

  Read the article

• login to account reverts to login screen, guest login ok

  - by Emil Hansen

  When I get to the login screen, I put my password, and I only get a black screen for 2 seconds, then we're back at the login screen. When I log in to the guest account everything works perfectly. What I've tried; I deleted .Xauthority as per instructions from elsewhere. No luck I removed 2 lines I put in .profile. No change Installed Gnome, but Unity, Unity 2D, various vers of gnome, same thing. according to other q/a's, this could be caused by lack of disk space. I have 80 gigs free, so I would assume it's not that if I Ctrl+Alt+F2 at login, I can login in to my account in the "terminal" with no problem. I would really appreciate any help to restore my account, and thank you very much beforehand

  Read the article

• full screen flash problems

  - by richzilla

  when i play flash videos from sites such as youtube, the videos initially play ok. However when the videos are full screened, a number of problems arise. Usually when the full screen button is first clicked, the video will take up the full screen, but will be frozen (however the video audio can still be heard). It can take several attempts to get the video to play in full screen. The video is also frozen if something triggers osd-notify (changing the volume, getting a new email etc.). Any ideas what might be going wrong?

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >