Search Results

Search found 4834 results on 194 pages for 'sudo'.

Page 30/194 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

  • why is port 500 in use and how can I free it? VPNC error

    - by kirill_igum
    i tried to use network manager to connect to my university's vpn; it didn't work. then i used a command line vpnc: > sudo vpnc [sudo] password for kirill: Enter IPSec gateway address: vpn.net.**.edu Enter IPSec ID for vpn.net.**.edu: ** Enter IPSec secret for **@vpn.net.**.edu: Enter username for vpn.net.**.edu: ** Enter password for **@vpn.net.**.edu: vpnc: Error binding to source port. Try '--local-port 0' Failed to bind to 0.0.0.0:500: Address already in use then i did this: sudo vpnc --local-port 0 with the same config and it all worked. i'd like to be able to use network manager gui to connect to vpn. I wanted to find out which program uses the port 500: > sudo netstat -a |grep 500 tcp 0 0 *:17500 *:* LISTEN udp 0 0 *:4500 *:* udp 0 0 *:17500 *:* unix 3 [ ] STREAM CONNECTED 63500 unix 3 [ ] STREAM CONNECTED 12500 @/tmp/.X11-unix/X0 there is nothing that uses 500 i'm using ubuntu 10.10 on thinkpad x201t

    Read the article

  • Networking stopped working on Ubuntu

    - by 1337Rooster
    I installed Ubuntu 10.04 through the Wubi installer (Funny, I installed it today and thought I would have gotten 10.10). I had a network connection and everything was working fine. I rebooted my coumputer a couple of times and then suddenly, I could not connect to the network and when I click the wireless/networking icon it says "Networking Disabled". I reinstalled Ubuntu and the problem went away. After a few reboots the problem returned. I have tried restarting to see if it would come back as well as a few other things listed below. Any other suggestions would be appreciated. Tried to restart networking via /etc/init.d/networking: amato@ubuntu:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0. [ OK ] Tried to stop and start it: amato@ubuntu:~$ sudo /etc/init.d/networking stop * Deconfiguring network interfaces... [ OK ] amato@ubuntu:~$ amato@ubuntu:~$ sudo /etc/init.d/networking start Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service networking start Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the start(8) utility, e.g. start networking networking stop/waiting Tried start networking: amato@ubuntu:~$ start networking start: Rejected send message, 1 matched rules; type="method_call", sender=":1.58" (uid=1000 pid=2241 comm="start) interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init")) amato@ubuntu:~$ sudo start networking networking stop/waiting Tried service networking restart: amato@ubuntu:~$ service networking restart restart: Rejected send message, 1 matched rules; type="method_call", sender=":1.60" (uid=1000 pid=2248 comm="restart) interface="com.ubuntu.Upstart0_6.Job" member="Restart" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init")) amato@ubuntu:~$ sudo service networking restart restart: Unknown instance: Here are the contents of my /etc/network/interfaces. auto lo iface lo inet loopback I even tried to modify it to this (based on something I read, online, not sure if I was doing the right thing here). Tried everything again and no luck: auto lo eth0 iface lo inet loopback iface eth0 inet dhcp

    Read the article

  • Cannot disable spotlight indexing on volume

    - by jayhendren
    I have a FAT32 partition on my HDD. When using OSX, it is mounted to /Volumes/MEDIA. After a recent upgrade to Mavericks, spotlight is having trouble indexing it, eating up almost all of my system resources, and I cannot get the indexing to stop: [jay-mba-osx ~]% sudo mdutil -v -a -i off /: Indexing disabled. [jay-mba-osx ~]% sudo mdutil -v -V /Volumes/MEDIA -i off [jay-mba-osx ~]% mdutil -v -a -s /: Indexing disabled. /Volumes/BOOTCAMP: Indexing disabled. /Volumes/MEDIA: Indexing enabled. [jay-mba-osx ~]% [jay-mba-osx ~]% sudo mdutil -v -V /Volumes/MEDIA -E /Volumes/MEDIA: Indexing enabled. [jay-mba-osx ~]% sudo mdutil -v -V /Volumes/MEDIA -i off [jay-mba-osx ~]% mdutil -v -a -s /: Indexing disabled. /Volumes/BOOTCAMP: Indexing disabled. /Volumes/MEDIA: Indexing enabled. [jay-mba-osx ~]% How to I tell spotlight to "cease and desist" on my MEDIA volume? I only want or need spotlight indexing on my OSX partition.

    Read the article

  • Winbind group lookup painfully slow

    - by Marty
    I am running winbind on an RHEL 6 system. Everything works fine except group lookups, so many commands (including sudo) are painfully slow. I did an strace which shows that winbind looks up every group and every user within each group for the current user. Some of these groups have 20000+ users so a simple sudo can take 60 seconds to complete. I really only care about speeding up the sudo command. Ideal solutions would make it so either: groups with more than X number of users will not be looked up, or sudo bypasses group lookups altogether. Here is my current "smb.conf" for winbind: workgroup = EXAMPLE password server = AD1.EXAMPLE.ORG realm = EXAMPLE.ORG security = ads idmap uid = 10000-19999 idmap gid = 10000-19999 idmap config EXAMPLE:backend = rid idmap config EXAMPLE:range = 10000000-19999999 winbind enum users = no winbind enum groups = no winbind separator = + template homedir = /home/%U template shell = /bin/bash winbind use default domain = yes winbind offline logon = false

    Read the article

  • Two network adapters on Ubuntu Server 9.10 - Can't have both working at once?

    - by Rob
    I'm trying to set up two network adapters in Ubuntu (server edition) 9.10. One for the public internet, the other a private LAN. During the install, I was asked to pick a primary network adapter (eth0 or eth1). I chose eth0, gave the installer the details listed below in the contents of /etc/network/interfaces, and carried on. I've been using this adapter with these setting for the last few days, and every thing's been fine. Today, I decide it's time to set up the local adapter. I edit the /etc/network/interfaces to add the details for eth1 (see below), and restart networking with sudo /etc/init.d/networking restart. After this, attempting to ping the machine using it's external IP address fails, but I can ping it's local IP address. If I bring eth1 down using sudo ifdown eth1, I can successfully ping the machine via it's external IP address again (but obviously not it's internal IP address). Bringing eth1 back up returns us to the original problem state: external IP not working, internal IP working. Here's my /etc/network/interfaces (I've removed the external IP information, but these settings are unchanged from when it worked) rob@rhea:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary (public) network interface auto eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx network xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx # The secondary (private) network interface auto eth1 iface eth1 inet static address 192.168.99.4 netmask 255.255.255.0 network 192.168.99.0 broadcast 192.168.99.255 gateway 192.168.99.254 I then do this: rob@rhea:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... [ OK ] rob@rhea:~$ sudo ifup eth0 ifup: interface eth0 already configured rob@rhea:~$ sudo ifup eth1 ifup: interface eth1 already configured Then, from another machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for [external ip]: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), Back on the Ubuntu server in question: rob@rhea:~$ sudo ifdown eth1 ... and again on the other machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Ping statistics for [external ip]: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms So... what am I doing wrong?

    Read the article

  • How to change default boot order ubuntu 10.04 ?

    - by Sako Christian
    Hello, How can I change default boot order in Ubuntu 10.04 from Ubuntu to Windows7? However, I already checked sudo gedit /etc/default/grub and modify the grub file to be GRUB_DEFAULT=4 and update the grup sudo update-grub I even install graph software to re order the book sudo startupmanager But still after restart the default choose for boot is Ubuntu ... Thank you, Sako Christian P.S: I am using Ubuntu 10.04 with grub version 1.98

    Read the article

  • [Ubuntu 10.04 Desktop] Unable to get Webmin or Vboxdrv to auto start on boot

    - by Matthew Hodgkins
    Ever since installing Ubuntu 10.04 I've had issues getting things to auto-start. I have installed webmin and VirtualBox but every time I reboot I have to manually run: sudo /etc/init.d/webmin start sudo /etc/init.d/vboxdrv start I have run: sudo update-rc.d -f webmin remove and then hodge@hodge-fs:~$ sudo update-rc.d webmin defaults update-rc.d: warning: webmin start runlevel arguments (2 3 4 5) do not match LSB Default-Start values (2 3 5) Adding system startup for /etc/init.d/webmin ... /etc/rc0.d/K20webmin -> ../init.d/webmin /etc/rc1.d/K20webmin -> ../init.d/webmin /etc/rc6.d/K20webmin -> ../init.d/webmin /etc/rc2.d/S20webmin -> ../init.d/webmin /etc/rc3.d/S20webmin -> ../init.d/webmin /etc/rc4.d/S20webmin -> ../init.d/webmin /etc/rc5.d/S20webmin -> ../init.d/webmin But it they still refuse to start on boot. Any ideas?

    Read the article

  • Installing sun-java6-jdk with apt-get on Ubuntu 10.04

    - by Adam S
    I have followed the instructions on numerous pages, such as this, which say to run the following commands: sudo add-apt-repository "deb http://archive.canonical.com/ lucid partner" sudo apt-get update sudo apt-get install sun-java6-jdk However, when I do this I still get the following error: me@mycomputer:~$ sudo apt-get install sun-java6-jdk Reading package lists... Done Building dependency tree Reading state information... Done Package sun-java6-jdk is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package sun-java6-jdk has no installation candidate I realize Java is available from many other sources, but for reasons that I can't get into here I must use this specific version. What can I do to get this installed?

    Read the article

  • fedora tomcat log file path

    - by Kamil
    My log file is inside: kamil@localhost tomcat$ grep "logs/" ./* ./log4j.properties:log4j.appender.R.File=${catalina.home}/logs/tomcat.log my CATALINA_HOME is kamil@localhost tomcat$ sudo grep "CATALINA" ./* ... ./tomcat.conf:CATALINA_HOME="/usr/share/tomcat" that above suggests that my log file is hare, and there it's: kamil@localhost tomcat$ sudo ls /usr/share/tomcat/logs/ | grep .out catalina.out So why can't I start server: kamil@localhost tomcat$ sudo tomcat start /usr/sbin/tomcat: line 30: /logs/catalina.out: No such file or directory

    Read the article

  • Black screen appears when booting new install of Ubuntu 11.10 on my desktop, cannot access Grub menu to fix

    - by izn
    I installed 11.10 on my desktop PC but get a black screen after the BIOS screen when I try to boot it. I was able to run 10.04.04 on my hard drive before installing 11.10 and I am also able to use 11.10 on my usb pendrive and CD ROM. I've tried unplugging all USB devices before booting and also upgrading from 11.10 to 11.10. Holding the shift key from the BIOS screen doesn't allow me to access the GRUB menu to try: Highlight the first entry, press “e” to edit it. Navigate to words “quiet splash”, delete them and type “nomodeset” in their place (without quotes). Press Ctrl + X to continue boot. Once on the desktop, go to System Administration Additional Drivers and activate the recommended drivers. So running 11.10 on my pendrive, I tried editing /etc/default/grub, commenting out the GRUB_HIDDEN_TIMEOUT setting by putting a '#' in front of it to display the grub menu and setting GRUB_TIMEOUT setting to a value greater than or equal to 1 e.g. GRUB_TIMEOUT=10. However, when I run sudo update-grub, I get: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?) I get the same error with update-grub after: sudo mount /dev/sda1 /mnt and after: sudo grub-install --root-directory=/mnt /dev/sda reboot sudo update-grub Other suggestions to fix the update-grub problem: Open synaptic, then purge all the related grub installed packages and reinstall grub-pc then and finally: sudo update-grub Or use Grub Customizer http://ubuntuforums.org/showthread.php?t=1195275 What would be the best way to approach this? I'm concerned about purging "all the related grub installed packages" but if it's true some files are corrupted this would seem necessary. Also, was I executing the correct commands i.e. with mount and grub-install, before running grub-update?

    Read the article

  • Ubuntu 10.04 server, problems installing the desktop

    - by ILMV
    Hi all, I have just setup two servers running 10.04 server and have installed the ubuntu-desktop as follows: sudo apt-get install ubuntu-desktop The problem is even though it says it has installed it will not auto-start... I've tried this: sudo mv /etc/init/gdm.conf /etc/init/gdm.disabled sudo mv /etc/init/gdm.disabled /etc/init/gdm.conf To enable/disable it but still not joy. Any ideas? Thanks, Ben

    Read the article

  • http://localhost/~admin/ gets a 403

    - by Pavan Katepalli
    When I go to localhost/~admin/ or 127.0.0.1/~admin/ my browser says: "Forbidden You don't have permission to access /~admin/ on this server." How do I change this?!??!?! It's driving me nuts! when I go to localhost or 127.0.0.1/ my browser says: "It Works!". I'm running mac osx 10.8. I created aliases in my .bash_profile file so that I can start, restart and stop Apache quickly: alias startApache="sudo apachectl start" alias stopApache="sudo apachectl stop" alias restartApache="sudo apachectl restart" In my /etc/apache2/httpd.conf file I turned on php5: LoadModule php5_module libexec/apache2/libphp5.so I also made sure to change the permissions for my admin.conf file with this command in terminal: sudo chmod 644 username.conf This is my /etc/apache2/users/admin.conf: <Directory "/Users/admin/Sites/"> Options Indexes MultiViews AllowOverride All Order allow,deny Allow from all </Directory>

    Read the article

  • “Disk /dev/xvda1 doesn't contain a valid partition table”

    - by Simpanoz
    Iam newbie to EC2 and Ubuntu 11 (EC2 Free tier Ubuntu). I have made following commands. sudo mkfs -t ext4 /dev/xvdf6 sudo mkdir /db sudo vim /etc/fstab /dev/xvdf6 /db ext4 noatime,noexec,nodiratime 0 0 sudo mount /dev/xvdf6 /db fdisk -l I got following output. Can some one guide me what I am doing wrong and how it can be rectified. Disk /dev/xvda1: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders, total 16777216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvda1 doesn't contain a valid partition table Disk /dev/xvdf6: 6442 MB, 6442450944 bytes 255 heads, 63 sectors/track, 783 cylinders, total 12582912 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/xvdf6 doesn't contain a valid partition table.

    Read the article

  • How to enable synergy 24800 (or some other port) through firewalld

    - by ndasusers
    After upgrading to Fedora 18, Synergy, the keyboard sharing system was blocked by default. The culprit was firewalld, which happily ignored my previous settings made in the Fedora GUI, backed by iptables. ~]$ ps aux | grep firewall root 3222 0.0 1.2 22364 12336 ? Ss 18:17 0:00 /usr/bin/python /usr/sbin/firewalld --nofork david 3783 0.0 0.0 4788 808 pts/0 S+ 20:08 0:00 grep --color=auto firewall ~]$ Ok, so how to get around this? I did sudo killall firealld for several weeks, but that got annoying every time I rebooted. It was time to look for some clues. There were several one liners, but they did not work for me. They kept spitting out the help text. For example: ~]$ sudo firewall-cmd --zone=internal --add --port=24800/tcp [sudo] password for auser: option --add not a unique prefix Also, posts that clamied this command worked also stated it was temporary, unable to survive a reboot. I ended up adding a file to the config directory to be loaded in on boot. Would anyone be able to have a look at that and see if I missed something? Though synergy works, when I run the list command, I get no result: ~]$ sudo firewall-cmd --zone=internal --list-services ipp-client mdns dhcpv6-client ssh samba-client ~]$ sudo firewall-cmd --zone=internal --list-ports ~]$

    Read the article

  • Problem with diacritics on psql 9.0 (PostgreSQL)

    - by Gaks
    I have two instances of PostgreSQL installed on my server: 8.3 and 9.0. There seams to be some problem with Polish diacritic characters (like óleaszzc) on postgresql 9.0 client - psql. When I connect to DB (either 8.3 or 9.0) with psql 8.3 - I can type all diacritics on the terminal without any problems: www:/tmp# sudo -u postgres /usr/lib/postgresql/8.3/bin/psql -q postgres=# ólscn However, when I connect to the same DBs with psql 9.0 client - I can't type diacritics on the terminal anymore: www:/tmp# sudo -u postgres /usr/lib/postgresql/8.3/bin/psql -q Here are some encoding settings: www:/tmp# sudo -u postgres /usr/lib/postgresql/9.0/bin/psql -q -c "show client_encoding" client_encoding ----------------- UTF8 (1 row) . www:/tmp# sudo -u postgres /usr/lib/postgresql/8.3/bin/psql -q -c "show client_encoding" client_encoding ----------------- UTF8 (1 row) . www:/tmp# sudo -u postgres /usr/lib/postgresql/9.0/bin/psql -q -l List of databases Name | Owner | Encoding | Collation | Ctype | Access privileges ---------------------+--------------+----------+-------------+-------------+----------------------- postgres | postgres | UTF8 | pl_PL.UTF-8 | pl_PL.UTF-8 | . www:/tmp# echo $LANG pl_PL.UTF-8 It looks like DB/cluster configuration doesn't matter - if psql 8.x on terminal works fine and psql 9.x does not. Any idea how to fix that?

    Read the article

  • "php: command not found" after changing PHP system files in OS X

    - by Aurelien Porte
    I wanted to install Symfony on Mac OS X Lion. Apparently, as MAMP was already installed on my computer, there was a problem with the "timezone" field in the php.ini file. I can't remember exactly the error but basically, Symfony installation required a timezone like "Europe/Paris" but MAMP apparently changed that part. Well, it's very vague but I've seen on the web that other people had the same issue. So I tried one of the solution I found (without success) but: It didn't work. I can not use the php command anymore ("-bash: php: command not found"). I can not remember the exact commands I did to go back. Here are some potential relevant commands I found in my history and that correspond with the beginning of my problem, in this order: sudo mv /usr/bin/php /usr/bin/php-old sudo ln -s /Applications/MAMP/bin/php5/bin/php /usr/bin/php rm /usr/bin/php-old sudo cp php.ini.default /etc/php.ini rm php.ini but I don't know anymor in which repertory I was. sudo mv /usr/bin/php-old /usr/bin/php

    Read the article

  • How have I locked me out from my Ubuntu VPS?

    - by Sanoj
    I have a Ubuntu Server as VPS (OpenVZ), and yesterday I installed php-fpm, but I guess something went wrong with the installation. Because since then I cannot log in to my server over SSH with PuTTY or using WinSCP. The message I get when connecting is Network error: Connection timed out. Immediately after the installation I was not able to use emacs either, I had to re-install it with apt-get install emacs. I have tried with clearing the firewall and rebooting the server from my web-based "control panel", but it doesn't help. The commands I used for installation of the PHP-fpm was from Installing PHP 5.3, Nginx And PHP-fpm On Ubuntu/Debian. And I guess it has something to do with these commands: cd /tmp wget http://us.archive.ubuntu.com/ubuntu/pool/main/k/krb5/libkrb53_1.6.dfsg.4~beta1-5ubuntu2_i386.deb wget http://us.archive.ubuntu.com/ubuntu/pool/main/i/icu/libicu38_3.8-6ubuntu0.2_i386.deb sudo dpkg -i *.deb sudo echo "deb http://php53.dotdeb.org stable all" >> /etc/apt/sources.list sudo apt-get update sudo apt-get install php5-cli php5-common php5-suhosin sudo apt-get install php5-fpm php5-cgi The web-sites that are hosted from my server works fine. Anyone that have the same experience or know how this could happen? I guess that I have to re-install Ubuntu Server from my "control panel" now, but I would like to avoid this situation in the future. Finally, I have backup on everything so nothing is lost if I have to re-install the machine.

    Read the article

  • Compiled ruby fails to find curses

    - by Hamish Downer
    I'm attempting to install the sup MUA but I'm having trouble. When I try to run it, it can't find curses: /usr/local/lib/ruby/site_ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require': no such file to load -- curses (LoadError) ... I am installing on a server running CentOS 5. I have compiled ruby and rubygems from source, and then installed sup using rubygems. I followed this article to compile ruby. I have found having a similar problem on ubuntu. The fix suggested there is to install libcurses-ruby, but I can't find a similarly named package in CentOS. I have installed the ncurses-devel package, as that was required for installing sup using gem. I have also installed the ncurses, cursesx and rbcurse gems, but none of these have fixed the problem. The article above about compiling ruby said you had to recompile the zlib extension, after doing: cd ext/zlib sudo ruby extconf.rb --with-zlib-include=/usr/include --with-zlib-lib=/usr/lib cd ../.. sudo make sudo make install So I've tried a few variants in ext/curses. The top few lines of ext/curses/extconf.rb are require 'mkmf' dir_config('curses') dir_config('ncurses') dir_config('termcap') So I've tried a few variants of setting paths: sudo ruby extconf.rb --with-curses-include=/usr/include --with-curses-lib=/usr/lib --with-ncurses-include=/usr/include --with-ncurses-lib=/usr/lib --with-termcap-lib=/lib sudo ruby extconf.rb --with-curses-include=/usr/include --with-curses-lib=/usr/lib --with-termcap-lib=/lib and re-doing the make, but to no avail as yet. Any ideas to move it forward are welcome.

    Read the article

  • virtualisation with kvm: export services from guest to the host

    - by ascobol
    Hello, I would like to export some services from the guest os to the host os, via kvm, and by the same way learn some things about networking. I have tried the following commands: In the host (kubuntu 10.4): $ sudo tunctl -u ascobol Set 'tap0' persistent and owned by uid 2401 $ sudo ifconfig tap0 192.168.2.1 netmask 255.255.255.0 broadcast 192.168.2.255 The ifconfig command returns: $ /sbin/ifconfig tap0 Link encap:Ethernet HWaddr 3e:4e:e3:cc:bc:92 inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::3c4e:e3ff:fecc:bc92/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:17 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 Then I run the virtual machine (ubuntu server 10.4): $ sudo kvm -hda ubuntuserver104.qcow2 -net nic -net tap,name=tap0,script=no (I'm using sudo because without it fails with the following message:) warning: could not configure /dev/net/tun: no virtual network emulation With sudo the virtual machine boots, I just get this message: pci_add_option_rom: failed to find romfile "pxe-rtl8139.bin" In the virtual machine: $ ifconfig eth0 192.168.2.2 netmask 255.255.255.0 broadcast 192.168.2.255 Now if I run: $ ssh 192.168.2.2 I just get a No route to host What is wrong with this setup ? Thanks !

    Read the article

  • Fabric doesn't launch Nginx remotely

    - by endofu
    I want to be able to start and stop an nginx server on an Ubuntu EC2 instance with Fabric. I have this two scripts in my fabfile.py: def start_nginx(): sudo('/etc/init.d/nginx start') #also tried this: run('sudo /etc/init.d/nginx start') def stop_nginx(): sudo('/etc/init.d/nginx stop') The start_nginx() seemingly runs without errors (* Starting Nginx Server.../ ...done.) but doesn't start the server (or it dies immediately). If I SSH into the instance this starts nginx perfectly: sudo /etc/init.d/nginx start The stop_nginx() Fabric script stops the server remotely. I compiled nginx from source, using this http://nginx.org/download/nginx-1.1.9.tar.gz and using this script in /etc/init.d: https://github.com/JasonGiedymin/nginx-init-ubuntu/blob/master/nginx. The only thing I modified is this line: DAEMON=/usr/local/sbin/nginx to DAEMON=/usr/sbin/nginx because that's the path I used when I ./configure-d my compile. Does anyone have any idea why the init script behaves differently being called from Fabric?

    Read the article

  • multi-user rvm gem install failure when called from CloudFormation::Init

    - by Peter Mounce
    I've taken an Amazon Linux AMI (based on CentOS) and installed RVM (1.10.3) to it in multi-user fashion (see {1} below). I used that to install ruby 1.9.3-p125, rubygems 1.8.17, and bundler 1.1 as the baseline requirements for most things I'm going to be using the instances for. I've captured that instance to an AMI, and am now launching it via CloudFormation, with some CloudFormation::Init commands. One of them is to use s3cmd to pull down a private gem from S3, and the next one, the one that fails, is to install that gem. It fails with an error message 2012-03-15 16:53:20,201 [ERROR] Command 20_install_gems (/usr/local/rvm/rubies/ruby-1.9.3-p125/bin/gem install ./*.gem) failed 2012-03-15 16:53:20,202 [DEBUG] Command 20_install_gems output: /usr/local/rvm/rubies/ruby-1.9.3-p125/bin/gem:12:in `require': no such file to load -- rubygems (LoadError) from /usr/local/rvm/rubies/ruby-1.9.3-p125/bin/gem:12 Now, that happens during the cfn-init execution - I assume, but haven't checked yet, that cfn-init is being run with an environment different from that of ec2-user (there are no other users on the instance). If I run gem install mygem.gem in an interactive session then that works fine. So, my question really, is what should I do to make this work for cfn-init? Have I correctly set up rvm as multi-user? I've confirmed that cfn-init is being run as the root user, with his restricted environment. How should I source the /etc/profile.d/rvm.sh into root's sessions? {1} My semi-automated rvm installation steps (run in interactive session as ec2-user): sudo bash -s stable < <(curl -s https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer ) sudo gpasswd -a ec2-user rvm # iconv-devel is baked into centos' glibc sudo yum install -y autoconf automake bison bzip2 gcc-c++ git libffi-devel libtool libxml2-devel libxslt-devel libyaml-devel make openssl-devel patch readline readline-devel zlib zlib-devel source /etc/profile.d/rvm.sh rvm list known # in a new session: rvm install ruby-1.9.3-p125 rvm use 1.9.3 --default gem update --system # gems required by public_web-awareness gem install aws-sdk bundler cocaine sinatra echo -e "gem: --no-ri --no-rdoc\n" > /home/ec2-user/.gemrc # delete unnecessary documentation files rm -rf `gem env gemdir`/doc sudo -s sudo echo -e "gem: --no-ri --no-rdoc\n" > /etc/skel/.gemrc sudo echo -e "gem: --no-ri --no-rdoc\n" > /etc/gemrc # ctrl + d out of the sudo session Some environment information: [ec2-user@ip ~]$ echo $PATH /usr/local/rvm/gems/ruby-1.9.3-p125/bin:/usr/local/rvm/gems/ruby-1.9.3-p125@global/bin:/usr/local/rvm/rubies/ruby-1.9.3-p125/bin:/usr/local/rvm/bin:/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/aws/bin:/home/ec2-user/bin [ec2-user@ip ~]$ echo $GEM_HOME /usr/local/rvm/gems/ruby-1.9.3-p125 [ec2-user@ip ~]$ echo $GEM_PATH /usr/local/rvm/gems/ruby-1.9.3-p125:/usr/local/rvm/gems/ruby-1.9.3-p125@global [ec2-user@ip ~]$ echo $BUNDLE_PATH [ec2-user@ip ~]$ gem list *** LOCAL GEMS *** aws-sdk (1.3.6) bundler (1.1.0) cocaine (0.2.1) httparty (0.8.1) json (1.6.5) multi_json (1.1.0) multi_xml (0.4.1) nokogiri (1.5.1, 1.5.0) rack (1.4.1) rack-protection (1.2.0) rake (0.9.2) sinatra (1.3.2) tilt (1.3.3) uuidtools (2.1.2) yamler (0.1.0)

    Read the article

  • Ubuntu 10.04 RGBA(Transparent theme) bug

    - by Nrew
    I tried to follow this tutorial frome ghacks.net. But I end up with a bug. Everytime I try to change the desktop background or the theme. It opens up lots of folders. And then close it back again. So I cannot do anything when I try to change the background or the theme to the default. Here is the tutorial And I can't even shutdown my machine now, please help. EDIT I tried executing these commands in the terminal sudo add-apt-repository ppa:erik-b-andersen/rgba-gtk sudo apt-get update && sudo apt-get upgrade sudo apt-get install gnome-color-chooser gtk2-module-rgba sudo apt-get install murrine-themes And it installed gnome color changer. It works, and the windows became transparent, but I can't change to the default theme and I can't put a background Here's the screenshot, when I try to change something in the preferences: Its just okay if I can't change the theme, but it won't let me change the background either. Or maybe the background is changed but its transparent just like the other windows. You can see that in the taskbar(or whatever its called in Ubuntu). Its full. What can I do to atleast make the background visible.

    Read the article

  • Have an unprivileged non-account user ssh into another box?

    - by Daniel Quinn
    I know how to get a user to ssh into another box with a key: ssh -l targetuser -i path/to/key targethost But what about non-account users like apache? As this user doesn't have a home directory to which it can write a .ssh directory, the whole thing keeps failing with: $ sudo -u apache ssh -o StrictHostKeyChecking=no -l targetuser -i path/to/key targethost Could not create directory '/var/www/.ssh'. Warning: Permanently added '<hostname>' (RSA) to the list of known hosts. Permission denied (publickey). I've tried variations using -o UserKnownHostsFile=/dev/null and setting $HOME to /dev/null and none of these have done the trick. I understand that sudo could probably fix this for me, but I'm trying to avoid having to require a manual server config since this code will be deployed on a number of different environments. Any ideas? Here's a few examples of what I've tried that don't work: $ sudo -u apache export HOME=path/to/apache/writable/dir/ ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=path/to/apache/writable/dir/.ssh/known_hosts -l deploy -i path/to/key targethost $ sudo -u apache ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=path/to/apache/writable/dir/.ssh/known_hosts -l deploy -i path/to/key targethost $ sudo -u apache ssh -o StrictHostKeyChecking=no -o UserKnownHostsFile=/dev/null -l deploy -i path/to/key targethost Eventually, I'll be using this solution to run rsync as the apache user.

    Read the article

  • "tshark: There are no interfaces on which a capture can be done" in Amazon Linux AMI

    - by user1264304
    My goal is to capture packets with tshark in Amazon Linux AMI. While typing tshark in the command line there's an error: "tshark: There are no interfaces on which a capture can be done" How to implement the solution from Wireshark setup Linux for nonroot user $ sudo apt-get install wireshark $ sudo dpkg-reconfigure wireshark-common $ sudo usermod -a -G wireshark $USER $ gnome-session-quit --logout --no-prompt in Amazon Linux AMI (it's not Ubuntu)? Thanks.

    Read the article

  • How do you create a bootable partition on a USB drive?

    - by Nathan DeWitt
    I have a bootable ISO designed to be burned to a double-layer DVD. I don't have a double layer DVD burner, so I would like to stick the ISO image on a 50 GB partition on a USB hard drive I have. How do I get the boot info onto the hard drive? If it helps, it's an OSx86 Live CD. Attempt 1: booted into Ubuntu 9.04 LiveCD deleted the partition on my existing USB hard drive sudo dd if=/path/to/image.iso of=/dev/MyUSB booted to USB drive error: Error Loading OS Atempt 2: booted into Ubuntu 9.04 LiveCD deleted the partition on my existing USB hard drive sudo mkdosfs -I -v -n iPC /dev/MyUSB sudo syslinux /dev/MyUSB sudo dd if=/path/to/image.iso of=/dev/MyUSB booted to USB drive error: Selected boot device not available - strike F1 to retry boot, F2 for setup utility

    Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >