Search Results

Search found 8233 results on 330 pages for 'unresolved external'.

Page 30/330 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

• Internal+external interfaces with multiple default gateways on win2003

  - by fileitup

  Im trying to set up several web servers for a load balanced cluster and need to have each server connected to the internal network (for load balancing) as well as to an external network (internet - for administration). I have two NICs but since I cant set two default gateways I have the external gateway as default and the internal as a route rule. This setup only works half way - the internal network is fine but I cant log in from outside or see the web from the box. If I switch the gateways remote login/web will work, but the internal wont. Im sure someone encountered this before but wasnt able to find anything online. Any help will be appreciated.

  Read the article

• How can I turn the LED off whilst using an external display

  - by thelearner

  Is there anyway of turning off the LED screen on my MacBook Pro whilst using an external display?

  Read the article

• Dual External Monitors Through Docking Station on ASUS G73JW-XT1

  - by user60695

  I am getting an ASUS G73JW-XT1; and I would like to set it up so that I can plug it into a docking station at my desk, and use 2 external monitors (not the laptop display and an additional monitor). The computer supports a DVI and HDMI output, but I cannot find any docking stations that will support two external displays, as well as audio ports and USB ports for other peripherals. Does anybody know of a specific docking station that will do this, or another workaround without having to plug in several things to my laptop every time I bring it to my desk?

  Read the article

• Format External HD on Airport Extreme Base Station?

  - by David.Chu.ca

  I just got an Airport Extreme Base Station. I am planning to use this one replace my current Linksys router. This works fine. My another purpose of getting this device is to use its USB port to connect to several external HDs as my backup Time Machine. I can see one 500GB HD through Airport Base Station. However, I cannot format it by using Disk Utility. What I did is to connect the HD to my iMac directly first and then clean and format the disk by Disk Utility application. Then I move the HD to the Airport Base Station. After that I can designate the HD as my Time Machine destination. Is there any way to format the HD connected to Airport Base Station? Any issues to use an external HD through Airport Base Station for Time Machine backups?

  Read the article

• external pop email relay

  - by Pixman

  I want to offer to my customer this possibility : get her pop3 emails from external pop3 server forward the news emails to the new external pop3 server I have find lot of tools for sync imap accounts, or sync pop to imap, but i just want get pop and send to another email adress ! I search a answer for linux ( if i can make a simple daemon for make it's it's good ). Thanks a lot for your help. edit for more detail : For simplify my question, in my use case, it's just want to connect as client via pop protocol ( like a mail app ). And i check news emails, and forward to other email adress. I search about an app or code for create this on linux. In this situation have no access to mailbox dirs, or server configuration ( in this case i have already the answer by create a qmail hook ) Maybe, it's not the good website ? my question must be post on the stackoverflow part ?

  Read the article

• About the External Graphics Card and CPU usage

  - by Balaji

  Hi, We are Rendering 16 live Streams at our client machine through one of our applications and the resolution of the video streams are as 4CIF/MPEG4/25FPS/4000Kbits. The configuration fo the client machine is below. HP Desktop Machine: Microsoft Windows XP Intel (R) Core2 Duo CPU E8400 @ 3.00 GHz 2.99 GHz, 1.94 GB of RAM Intel (R) Q45/Q43 Series Express Chipset (Inbuild) The CPU usage of the machine peaks 99% for 16 straems. After some discussion, we had decided to install external graphics card to reduce the CPU usage. So that, we have tried following graphics cards. NVIDIA Quadro NVS 440 - 128 MB Radeon HD 4350 - 512 MB GDDR2 Redeon HD 4350 - 1GB DDR2 ASUS EAH 4350 Silent 1GB DDR2 But the performance wise no difference, even worst. So, what is the pupuse of these external graphics cards? Really it will reduce the CPU usage? What parameters have to check, if we want to reduce the CPU usage? Please do the needful as soon as possible. Regards Balaji

  Read the article

• Sony VGN-NR260E "External Device Boot"

  - by user72158

  [A LITTLE BACKGROUND] On all modern Dell computers pushing the F12 on bios boot will allow for a screen that lets you choose what boot option you need. For example if I want to boot off of a USB flash drive to boot into a live Linux distribution in order to clean virus's on netbooks that do not have CD drives to boot from I would push F12 and choose USB device from the list of options. If this does not show up then I can always go to the F2 bios setup and choose flash drive to be the first option. When I restart the computer it will boot into the flash device. I understand that I can purchase an external USB CD drive and then boot from that. I do not want to use that option. The reason for using a flash device instead of a CD is: A: This USB flash device has several different boot OS's on it that are used. B: The antivirus disks are updated often and burning cd's and throwing away others is wasteful compared to simply updating a flash drive. There is nothing wrong with the flash drive. It works perfect on many other PC's. [PROBLEM] Booting this flashdrive has been working for years on hundreds of computers... I just have this ONE computer that I cannot figure out how to get it to boot on... I have a Sony Vaio that will not boot to this device. I've tried pushing every key combo I can think of (F12, Esc, Del, F10...) and none of these key combinations will bring up the boot menu. I chose F2 and went into the bios and changed the first boot device to USB flash device. This did not work either. There is an astrix next to the device and the note states: "This Drive is available when External Device Boot is Enable." [WHAT I NEED] I need to know How to enable External Device Boot on the Sony Vaio VGN-NR260E laptop. OR How to bring up the Boot Menu to allow me to boot off a flash device. Thanks for anyone that can help!

  Read the article

• About the External Graphics Card and CPU usage

  - by Balaji

  We are Rendering 16 live Streams at our client machine through one of our applications and the resolution of the video streams are as 4CIF/MPEG4/25FPS/4000Kbits. The configuration of the client machine is below. HP Desktop Machine: Microsoft Windows XP Intel (R) Core2 Duo CPU E8400 @ 3.00 GHz 2.99 GHz, 1.94 GB of RAM Intel (R) Q45/Q43 Series Express Chipset (Inbuild) The CPU usage of the machine peaks 99% for 16 streams. After some discussion, we had decided to install external graphics card to reduce the CPU usage. So that, we have tried following graphics cards. NVIDIA Quadro NVS 440 - 128 MB Radeon HD 4350 - 512 MB GDDR2 Redeon HD 4350 - 1GB DDR2 ASUS EAH 4350 Silent 1GB DDR2 But the performance wise there has been no difference - even a drop in performance. So, what is the purpose of these external graphics cards? Really it will reduce the CPU usage? What parameters have to check, if we want to reduce the CPU usage?

  Read the article

• trying to understand how Linux /etc/hosts file works with local and external IP addresses

  - by gkdsp

  Let's say I have a Linux server with an external IP of 123.456.789.012 and a local IP of 192.168.0.1. If it's /etc/hosts file looks like, for example, 123.456.789.012 host2.mydomain.com 192.168.0.1 host2.mydomain.com When an application on the server generates traffic to send using host2.mydomain.com, how does the server know whether to use the local or external IP address (since the same host name shows two IP addresses)? Or, does it need something additional than what I've presented here to decide this? Or, does it just sent it out as host2.mydomain.com and let the receiving end deal with it (if so, how to make sure traffic intended for local network indeed goes to local network)?

  Read the article

• Getting error code -41 when copying files to external drive

  - by diego

  I'm having trouble copying some files from my mac to an external hard drive: I keep getting the nondescript "error code -41". I noticed some of the files with an additional "@" permission bit had the "com.apple.quarantine" flag set. I used the "xattr" command from this article What should I do about com.apple.quarantine? to take care of the quarantine flag and sort that out (these files were copied over from another mac on my network, so I guess OS X flagged them as quarantine). That took care of the problem for those files but I still have some that I can't manually copy over to the external drive. The only other thing I've noticed is that some of these files have a an extra permission bit: "drwxr-xr-x+" which I haven't been successful in googling. Aside from that I don't see anything else. Also, Disk Utility says everything's fine. Any help would be greatly appreciated.

  Read the article

• Shortcut Keys for external monitor with XP

  - by Rhys

  Last night my laptop (samsung nc20 running XP) fell off the table and the screen cracked leaving me unable to see anything. I have arranged for a it to be repaired but want to make a back up of several folders before it gets sent away. I was planning to use my parents LG LCD tv as an external monitor so I can see what I am doing when copying things to but after plugging it in nothing seems to happen (works instantly on another laptop running vista) and hotkeys seem to be of no use at all. Does anyone know the series of shortcut keys I will need to do to get XP to use an external monitor? Thanks in advance

  Read the article

• Asus WL-520GC + external HDD via Ethernet

  - by Azat

  Has anyone experience of using such combination? Exactly with the same model (or from same model line). How does it works? How hard is to set up all that? What difficulties? I use this router a couple of years, but now i haven't such external drive at my disposal. I want to buy something like Verbatim 47591 or Western Digital WDH1NC10000. (By the way, my router has no USB ports, therefore only Ethernet-ports for external HDD are supported.) Thanks you a lot in advance!

  Read the article

• Bound external Cisco CIGESM ports to a specific BladeServer

  - by Vinícius Ferrão

  We have an IBM BladeCenter with 14 blade servers and one external Cisco CIGESM for Ethernet connectivity. Since this hardware is a little old, we will use it for other services, and we want to run a pfSense instance on one of the blades. It's just an Firewall Appliance, but it needs two network interfaces: one for the WAN and the other one for LAN access. Our architecture works on top of static routes, we don't use NAT, so we got the WAN IP in one interface routing to the another one. The main problem is how to plug the WAN cable in one of the four external ports and make it exclusive to the blade server containing the firewall. And we also need an exit port that goes through a 3COM 4200G switch that makes the internal routing and VLAN separation. Thanks in advance

  Read the article

• Macbook Pro (SantaRosa) internal display not detected by graphics card, external monitor OK

  - by BLAU

  My MacBook Pro (2.4 Ghz, Santa Rosa with infamous nVidia card) acts strange. It shows the normal gray screen with Apple logo and animation flawlessly during start up but the internal display goes black without any rendering at all when all is loaded. (shining a light on display show nothing) If an external monitor is connected through the DVI port it will remain black during start up and then show the desktop as the internal display goes black. This happens both while booting to Mountain Lion and Windows XP. I have checked "About my Mac" and only the external display is listed. The same is the case if I use the nVidia Control panel in Windows XP. My questions: Is this a hardware problem or is it related to software maybe even firmware? What controls the display during start up, graphics card or something else?

  Read the article

• ubuntu Grub boot hangs on external usb drive

  - by schoetbi

  Hi, i just gave xubuntu another try and installed it ordinarily on a external usb harddisk. I have another harddisk installed inside the laptop that has Windows Xp on it. Now the problem: When I boot from the external drive the boot menu of Grub 2 shows up and i see all installed bootable partitions including windows. Now I select Xubuntu and wait. When the Xubuntu Logo shows up the boot process hangs. Now the funny thing. When the logo shows up I can unplug the usb drive and reconnect it real fast. Then the boot process will continue!!! Since I am a Linux newbie I would appreciate every hint that can solve this so that I can enjoy a smooth Linux boot:-) EDIT Grub version is: tobias@ubuntu:~$ grub-install -v grub-install (GRUB) 1.98+20100804-5ubuntu3 Kernel is: tobias@ubuntu:~$ uname -r 2.6.35-23-generic Xubuntu is 9.10 Thanks

  Read the article

• Linux: Automatically switch to external monitor (VGA)

  - by peoro

  I've got an eeePC with a really tiny monitor, so whenever I go (home, faculty, parent's home, friend's home, ...) I attach it to any external monitor I can find. If it matters my system is like this: Archlinux Linux 2.6.36 Xorg 7.6 X server 1.9.2 Intel Corporation Mobile 945GME Express Integrated Graphics Controller (fully accelerated by intel modules) When I boot up the system, it uses the integrated monitor (LVDS1) only, and I have to manually manually switch to the external monitor (VGA1) using xrandr. Is it possible to configure my Xorg (or whatever) so that it uses the VGA1 output if present?

  Read the article

• Issue with Visual C++ 2010 (Express) External Tools command

  - by espais

  Hi all, Normally we develop in VS 2005 Pro, but I wanted to give VS 2010 a spin. We have custom build tools based off of GNU make tools that are called when creating an executable. This is the error that I see whenever I call my external tool: ...\gnu\make.exe): *** couldn't commit memory for cygwin heap, Win32 error 487 The caveat is that it still works perfectly fine in VS2005, as well as being called straight from the command line. Also, my external tool is setup exactly the same as in VS 2005. Is there some setting somewhere that could cause this error to be thrown?

  Read the article

• Windows 7 changes desktop icon location when switching from External Monitor to Internal Monitor (laptop)

  - by Gareth Jones

  I have a Windows 7 Laptop, and lately its been acting really weird with my 1080p Monitor. When I get home from school, Ill plug my screen in, and close my laptop lid (which makes the laptop treat the Monitor as the primary and only screen). However it will move my desktop icons! This also happens when I remove / unplug the screen, as shown in the pictures. I hate this, as Im the kinda person who's use to every icon being in a set spot, and so am use to their location. Its a massive hassle to try and move the icons back to their original spot. Anyone have any ideas on how to fix this? Thanks P.S it could be due to the resolution of the screen's being different, but this never happened before in the past Icons on External Moniter (after having moved them manually back into place): Icons after unplugging external monitor (and so using Laptop screen):

  Read the article

• SSH rsa key works with external IP not internal IP

  - by Ian

  I am using rackspace cloud hosting. I have 2 servers behind a load balancer. Each server has an external IP and an internal IP. I want to setup a sync job that uses SSH to transfer files. I made an rsa key, and I can successfully SSH from server A into server B, using the external IP of server B, without being prompted for a password. If I try to do the same but use the internal IP, it prompts me for a password. I want to be able to use the key instead of the password. Why is this? Is there something special I have to do during key generation so it works for both IPs? Any help is appreciated.

  Read the article

• cisco asa query dns external

  - by Alpacino

  my lab network asa firewall below 10.10.10.20 -- ASA --- 192.168.1.10 -- website external my client 10.10.10.20 want to access website external and i create nat nat (inside,outside) static 192.168.1.10 and access list access-list outside-acl extended permit tcp any host 10.10.10.20 eq www access-list outside-acl extended permit tcp any host 10.10.10.20 eq domain access-list inside-acl extended permit tcp 10.10.10.0 255.255.255.0 any eq www access-list inside-acl extended permit tcp 10.10.10.0 255.255.255.0 any eq domain access-group outside-acl in interface outside access-group inside-acl in interface inside when i access to website with domain name it can't access but i access website with ip address it work please help me to solve problem thank you

  Read the article

• Converting an external hard drive to internal

  - by Nathan DeWitt

  I have a WD Elements 1 TB external drive. I'm in a pinch and I need an internal SATA drive. How do I find out if the drive in here is actually a SATA drive? Edit: The WD Elements is a really nice external drive. I gently pried open the top and slid out a 1 TB Caviar Green hard drive. There were four black rubber brackets that slid off easily. One screw removed the SATA -- USB, and then I slid it into my computer.

  Read the article

• External hard drive and Xbox

  - by Alex B.

  Is there any way of playing movies on the Xbox from an external hard drive? Thanks!

  Read the article

• Postfix does not get external emails

  - by Marks

  Hi there. I have a small vserver(ubuntu), on which i want to run mailman and therefore have to configure postfix. I already configured postfix to send mail per relay over gmail (server-ext.). I also receive local emails (server-server), but i dont get emails from ext. (ext. - server). I have a domain routed to the vserver. But when i send an email from external (e.g. from gmail) to [email protected] i don't get it into the inbox. But there is also no error return message i get to my gmail account. What could be a possible problem? Do i have to configure email revieving from external somewhere? Thanks for any help.

  Read the article

• Ubuntu/Nvidia lists DVI dual cable as single

  - by Joseph Mastey

  I have an NVidia Quadro FX 880M graphics card, from which I am trying to drive 2 monitors: my internal laptop montior (15.6", 1920x1080, Nvidia driver says it's running via DisplayPort) and an external 27" monitor (Dell U2711, 2560x1440 native resolution, via DVI). I've hooked the dual DVI cable to the dual DVI port on my dock (Dell PR03X) and installed the proprietary NVidia driver, but I cannot seem to get the full 2560x1440 out of the larger 27" external monitor. Looking at the NVidia driver settings, the monitor's connection is reported as a single DVI cable, rather than a dual one, which would explain the reduced resolution. Does anyone have any experience with an issue like this? What can I do to make full use of my new monitor? (Possibly) Relevant Information: There is no DVI port on the laptop itself, but one is provided via the dock. The laptop and dock both provide a DisplayPort jack, but I have been unable to get this working on either w/ the monitor. I did have the nouveau driver installed when I installed the nvidia proprietary driver, but have since removed it (no change in the monitor situation when I removed it). The 27" reports a max resolution of 1680x1050. Thanks, Joe

  Read the article

• Data recovery on a data HDD (no OS)

  - by aCuria

  I am helping a family member with a dead hard disk. It is a seagate 200Gb 3.5" HDD in one of those old-school external enclosures. The problem was that windows failed to detect the hard disk when plugged in through USB. I removed the hard disk from its enclosure, and plugged it into my desktop PC. The BIOS does detect it upon POST, but unfortunately windows 7 would refuse to boot. It will get stuck on the loading screen with the glowing windows logo. Safe mode doesn't help either. What options do I have before going for some professional data recovery? edit: Someone modified the Title to something completely different from what I was asking, i just changed it back. 1) 2 HDD drives, DiskA(Dead), DiskB(my OS disk) 2) when B is connected to my system, everything works fine 3) when A AND B is connected, failure to boot. POSTs fine, but windows wont load 4) A has NO OS, its PURE data. It came from an EXTERNAL HDD enclosure which doesnt belong to me, and im trying to do data recovery.

  Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >