Search Results

Search found 19934 results on 798 pages for 'usb flash drive'.

Page 30/798 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

  • Leapfrog Crammer won't mount as a USB flash drive

    - by William
    I can't seem to get the Leapfrog Crammer study and sound system to show up as a flash drive under ubuntu so I can transfer stuff to it. I don't want to install the leapfrog bloatware, can someone help me with this? Additional Information: When I plug my crammer into my computer it shows a 1 MB file system with a link to download the crammer software. I want to know how to access the rest of the crammer's file system so I can transfer music to it. The crammer does not show any other partitions in natulius. According to an article on the internet, the crammed is divided into three partitions: One with a link to install the crammer software, one with all content(music, flash cards, etc.) and one for firmware. I want to know how to access the one with the content so I can add music to the player. Can anyone help me with this? Thanks in advance.

    Read the article

  • Usb/vga not recognized anymore

    - by Peter Raeves
    I don't know what happened, but yesterday everything worked fine, but when I woke up this morning and booted my computer to Ubuntu 14.04 a bunch of hardware isn't recognized anymore. I use a dual monitor setup with dvi-d and vga, but the vga screen isn't recognized anymore and the dvi-d monitor is recognized as "Built-in Display" while I'm not on a laptop. Also every device connected through usb isn't recognized anymore either. I have a keyboard with the blue round connector, which still works, so I can still log in though. The computer goes slower than usual and I have no idea what has happened. Can anybody point me in the direction I should start looking, because this is scary! I just checked and both the front and back sound connectors stopped working also :/ Edit: The devices connected through USB are recognized as they all show up using sudo lsusb, Ubuntu just doesn't let me use them anymore.

    Read the article

  • Ubuntu Doesn't Start from USB After Installation

    - by Fred Venus
    My computer refuses to boot from the USB even after I change everything that I can possibly think of on my motherboard's BIOS. But I have booted from the USB twice in the past. The first time is when I first got the computer and needed to install a new operating system. The second time is when I installed Windows onto the whole hard drive and needed to reinstall Ubuntu. It seems that it only refuses to boot if there is already an existing installation of Ubuntu on the hard drive. Any ideas on what is going on?

    Read the article

  • 12.04 LTS usb wont boot

    - by Niva
    I've tried to install ubuntu 12.04 LTS parallel with Windows 8, on my laptop Clevo m767yu But when I try to boot from USB it just stops when it's trying to read the files. it stops and shows this picture: https://www.dropbox.com/s/np3ptvvmasv7ax2/IMAG0097.jpg If I try to boot from a cd, it stops and shows a cursor blinking. I've tried both usb and cd on other computers, and the both works. I've a little experience with Ubuntu, but I have never had problems with the installing process. Any help will be appreciated!

    Read the article

  • Cannot boot from USB to install 12.10

    - by Ramzi Njeim
    i am a long time user of Ubuntu and this is the first time a such thing happens to me. I usually upgrade from a version to an other, but this time i wish to do a clean install. I want to totally remove my 12.04 and do a clean install of 12.10, i created a live USB then i restarted my computer to boot from USB, i got the following error: Product is covered by one or more of the following patents: US5,434,872, US5,732,894, (and many more) Under that i see: PCIe GBE Family Controller Series v2.38 Media test failiure Exiting PXE ROM And then it reboots I've searched a lot for an answer, i guess the problem is with something in my bios, but i didn't find a fix. I would really appreciate a fix for my problem. My laptop is a Toshiba p775 dual boot ubuntu 12.04 and windows 7.

    Read the article

  • Flash Builder missing fundamental things

    - by Bart van Heukelom
    All of a sudden Flash Builder 4 is missing all kinds of fundamental things and is generating incorrect errors. I've had the same issue yesterday, where I fixed it by downloading a new Flex SDK and importing that into FB. I did this again, but this time it fixed nothing. I don't think it's something I did, like removing critical references from the build path. The errors also appeared on projects I was not working on at the time. It occurs for ActionScript, Flex and Flex Library projects alike. Update: I find this stack trace in the Flash Builder error log: !ENTRY com.adobe.flexbuilder.project 4 43 2010-05-11 11:55:47.495 !MESSAGE Uncaught exception in compiler !STACK 0 java.lang.NullPointerException at macromedia.asc.semantics.ConstantEvaluator.evaluate(ConstantEvaluator.java:2592) at macromedia.asc.parser.VariableBindingNode.evaluate(VariableBindingNode.java:64) at macromedia.asc.semantics.ConstantEvaluator.evaluate(ConstantEvaluator.java:2233) at macromedia.asc.parser.ListNode.evaluate(ListNode.java:44) at macromedia.asc.semantics.ConstantEvaluator.evaluate(ConstantEvaluator.java:2578) at macromedia.asc.parser.VariableDefinitionNode.evaluate(VariableDefinitionNode.java:48) at macromedia.asc.semantics.ConstantEvaluator.evaluate(ConstantEvaluator.java:2310) at macromedia.asc.parser.StatementListNode.evaluate(StatementListNode.java:60) at macromedia.asc.semantics.ConstantEvaluator.evaluate(ConstantEvaluator.java:2503) at macromedia.asc.parser.WithStatementNode.evaluate(WithStatementNode.java:44) at macromedia.asc.semantics.ConstantEvaluator.evaluate(ConstantEvaluator.java:2310) at macromedia.asc.parser.StatementListNode.evaluate(StatementListNode.java:60) at macromedia.asc.semantics.ConstantEvaluator.evaluate(ConstantEvaluator.java:2891) at macromedia.asc.parser.FunctionCommonNode.evaluate(FunctionCommonNode.java:106) at macromedia.asc.semantics.ConstantEvaluator.evaluate(ConstantEvaluator.java:2905) at macromedia.asc.parser.FunctionCommonNode.evaluate(FunctionCommonNode.java:106) at macromedia.asc.semantics.ConstantEvaluator.evaluate(ConstantEvaluator.java:3643) at macromedia.asc.parser.ClassDefinitionNode.evaluate(ClassDefinitionNode.java:106) at macromedia.asc.semantics.ConstantEvaluator.evaluate(ConstantEvaluator.java:3371) at macromedia.asc.parser.ProgramNode.evaluate(ProgramNode.java:80) at flex2.compiler.as3.As3Compiler.analyze4(As3Compiler.java:709) at flex2.compiler.CompilerAPI.analyze(CompilerAPI.java:3089) at flex2.compiler.CompilerAPI.analyze(CompilerAPI.java:2977) at flex2.compiler.CompilerAPI.batch2(CompilerAPI.java:528) at flex2.compiler.CompilerAPI.batch(CompilerAPI.java:1274) at flex2.compiler.CompilerAPI.compile(CompilerAPI.java:1496) at flex2.tools.oem.Application.compile(Application.java:1188) at flex2.tools.oem.Application.recompile(Application.java:1133) at flex2.tools.oem.Application.compile(Application.java:819) at flex2.tools.flexbuilder.BuilderApplication.compile(BuilderApplication.java:344) at com.adobe.flexbuilder.multisdk.compiler.internal.ASApplicationBuilder$MyBuilder.mybuild(ASApplicationBuilder.java:276) at com.adobe.flexbuilder.multisdk.compiler.internal.ASApplicationBuilder.build(ASApplicationBuilder.java:127) at com.adobe.flexbuilder.multisdk.compiler.internal.ASBuilder.build(ASBuilder.java:190) at com.adobe.flexbuilder.multisdk.compiler.internal.ASItemBuilder.build(ASItemBuilder.java:74) at com.adobe.flexbuilder.project.compiler.internal.FlexProjectBuilder.buildItem(FlexProjectBuilder.java:480) at com.adobe.flexbuilder.project.compiler.internal.FlexProjectBuilder.build(FlexProjectBuilder.java:306) at com.adobe.flexbuilder.project.compiler.internal.FlexIncrementalBuilder.build(FlexIncrementalBuilder.java:157) at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:627) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:170) at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:201) at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:253) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:256) at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:309) at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:341) at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:140) at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:238) at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)

    Read the article

  • dz's Open Flash Chart 2 disabling animation problem (Rails)

    - by greg
    How to disable the startup animation in OFC2? Since I started using the dz build, the on-show animation is on by default, which sucks quite a lot. Neither of these work: graph.animate=false graph.on_show=false Also, dz's build implements the tooltip hover support poorly - the tooltip continues to hover even when the cursor is on another flash object. Has anyone overcome these problems?

    Read the article

  • streaming desktop to flash player

    - by Erwing
    hi I would like to stream my desktop screen (or one of the application which i select) to flash player i woul like to publish my desktop in web i have wowze media player to multicast it but i have to create stream and give it to the wowze do you have any idea how to start what would be the best for it can you recomend something?

    Read the article

  • flash going crazy when adding two functions

    - by Malfist
    I'm adding these two functions to a parent class: public function get topShot():ShotGlass { return _topShot; } public function get bottomShot():ShotGlass { return _bottomShot; } The calls is called BaseEntry and is a subclass of MovieClip. Once I add these two functions, I get "The class 'class' must subclass 'flash.display.MovieClip' since it is linked to a library symbol of that type" on all the subclasses. What's going on?

    Read the article

  • Windows Flash CS2 font not showing?

    - by ricky roy
    Hi, I Installed the font into my system/font folder. But font is not showing. Font is showing in the word document but will not showing in the flash. Will you plz give me solutions. I am waiting for your response. Thanks & regards, Basant..

    Read the article

  • Can I get an adapter for usb 3.0 to gigabit, or a gigabit switch with usb 3.0?

    - by techaddict
    Basically I want to be able to attach USB 3.0 external portable hard drives to my network and maintain at least gigabit speeds. I can think of four ways to do this, two of which I know exist: 1) NAS - get an NAS which features USB 3.0 and gigabit 2) Gigabit router with a USB 3.0 port and I want to know if these two exist: 3) gigabit switch (multiple gigabit ports) with at least one USB 3.0 port 4) USB 3.0 to gigabit adapter The gigabit adapter would be similar to this: http://www.addonics.com/products/nas30u2.php except that that is only USB 2.0 so it is not true gigabit, as gigabit is 125MBps but USB 2.0 is only 60MBps, so that adapter only has a maximum transfer speed of 60MBps and the "gigabit" is practically useless.

    Read the article

  • Flash not Working in Google Chrome for Mac

    - by Blakeasd
    Flash has randomly stopped working in Google Chrome for Mac. All that appears is a white flash then nothing. I can hear sound, and when I right click on where Flash is supposed to be I see the Flash Player options. I have completely reinstalled Chrome, including deleting all of its support files. I reinstalled my system flash and tried making Chrome use my system flash, but nothing works. Flash is fine in Safari, but not in Chrome. How do I fix this? I am running the latest Google Chrome Dev build (21.0.1171.0) and Mac OS X 10.7.4 . Thanks!

    Read the article

  • Motherboard/PSU crippling USB and Sata

    - by celebdor
    I very recently bought a new desktop computer. The motherboard is: Z77MX-D3H and the power supply is ocz zs series 550w. The issue I have is that once I boot to the operating system (I have tried with fedora and Ubuntu with kernels 2.6.38 - 3.4.0), my hard drive (2.5" Magnetic) occasionally makes a power switch noise and it resets. Needless to say, when this drive is the OS drive, the OS crashes. I also have a SSD that works fine with the same OS configurations, but if I have the magnetic hard drive attached as second drive, it works erratically and the reconnects result in corrupted data. I also noticed that whenever I plug an external hard drive USB2.0 or USB3.0 to the computer the issue with the reconnects is even worse: [ 52.198441] sd 7:0:0:0: [sdc] Spinning up disk... [ 57.955811] usb 4-3: USB disconnect, device number 3 [ 58.023687] .ready [ 58.023914] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.023919] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.023932] sd 7:0:0:0: [sdc] Sense not available. [ 58.024061] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024063] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024064] sd 7:0:0:0: [sdc] Sense not available. [ 58.024099] sd 7:0:0:0: [sdc] Write Protect is off [ 58.024101] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 58.024135] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024137] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024400] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.024402] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024405] sd 7:0:0:0: [sdc] Sense not available. [ 58.024448] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024450] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024451] sd 7:0:0:0: [sdc] Sense not available. [ 58.024469] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024471] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024472] sd 7:0:0:0: [sdc] Attached SCSI disk [ 58.407725] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd [ 58.424921] scsi8 : usb-storage 4-3:1.0 [ 59.424185] scsi 8:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 59.424406] scsi 8:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 59.425098] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 59.425176] ses 8:0:0:1: Attached Enclosure device [ 59.425248] ses 8:0:0:1: Attached scsi generic sg3 type 13 [ 61.845836] sd 8:0:0:0: [sdc] 976707584 512-byte logical blocks: (500 GB/465 GiB) [ 61.845838] sd 8:0:0:0: [sdc] 4096-byte physical blocks [ 61.846336] sd 8:0:0:0: [sdc] Write Protect is off [ 61.846338] sd 8:0:0:0: [sdc] Mode Sense: 47 00 10 08 [ 61.846718] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.846720] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.848105] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.848106] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.857147] sdc: sdc1 [ 61.858915] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.858916] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.858918] sd 8:0:0:0: [sdc] Attached SCSI disk [ 69.875809] usb 4-3: USB disconnect, device number 4 [ 70.275816] usb 4-3: new SuperSpeed USB device number 5 using xhci_hcd [ 70.293063] scsi9 : usb-storage 4-3:1.0 [ 71.292257] scsi 9:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 71.292505] scsi 9:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 71.293527] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 71.293668] ses 9:0:0:1: Attached Enclosure device [ 71.293758] ses 9:0:0:1: Attached scsi generic sg3 type 13 [ 73.323804] usb 4-3: USB disconnect, device number 5 [ 101.868078] ses 9:0:0:1: Device offlined - not ready after error recovery [ 101.868124] ses 9:0:0:1: Failed to get diagnostic page 0x50000 [ 101.868131] ses 9:0:0:1: Failed to bind enclosure -19 [ 101.868288] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868292] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868296] sd 9:0:0:0: [sdc] Sense not available. [ 101.868428] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868434] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868439] sd 9:0:0:0: [sdc] Sense not available. [ 101.868468] sd 9:0:0:0: [sdc] Write Protect is off [ 101.868473] sd 9:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 101.868580] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868584] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868845] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868849] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868854] sd 9:0:0:0: [sdc] Sense not available. [ 101.868894] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868898] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868903] sd 9:0:0:0: [sdc] Sense not available. [ 101.868961] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868966] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868969] sd 9:0:0:0: [sdc] Attached SCSI disk Now, if I plug the same drive to the powered usb 2.0 hub of my monitor, the issue is not reproduced (at least on a 20h long operation). Also the issue of the usb reconnects is less frequent if the hard drive is plugged before I switch on the computer. Does anybody have some advice as to what I could do? Which is the faulty part/s that I should replace? As for me, I really don't know if to point my finger to the PSU or the Motherboard (I have updated to the latest firmware and checked the BIOS settings several times). EDIT: The reconnects are happening both in the Sata connected drives and the USBX connected drives.

    Read the article

  • In 10.10, USB 3.0 PCI Express card recognized by lspci but not lsusb or dmesg. How to fix?

    - by Paul
    Asus N PC, runs 10.10 x86_64 The Asus N comes with 4 usb 2.0 ports, each labelled 2.0 on the case. Attempting to add two usb 3.0 ports to be provided by a generic usb 3.0 pci express card installed in the pci expres slot. The new card says usb 3.0 and has the blue ports. The card is installed into the laptop unpowered, then the laptop is powered on and boots normally. Nothing happens when a USB 3.0 flash drive is inserted into the usb 3.0 port. uname -a Linux drpaulbrewer-N90SV 2.6.35.8 #1 SMP Fri Jan 14 15:54:11 EST 2011 x86_64 GNU/Linux lspci -v 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64 Kernel modules: sis-agp 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fa000000-fdefffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [f4] Power Management version 2 Capabilities: [70] Subsystem: Silicon Integrated Systems [SiS] PCI-to-PCI bridge Kernel driver in use: pcieport 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01) Flags: bus master, medium devsel, latency 0 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) (prog-if 80 [Master]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 128 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at ffe0 [size=16] Capabilities: [58] Power Management version 2 Kernel driver in use: pata_sis 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 20 Memory at f9fff000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 21 Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 22 Memory at f9ffd000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2 Kernel driver in use: ehci_hcd 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02) Subsystem: ASUSTeK Computer Inc. Device 11f5 Flags: bus master, medium devsel, latency 0, IRQ 19 Memory at f9ffcc00 (32-bit, non-prefetchable) [size=128] I/O ports at cc00 [size=128] Capabilities: [40] Power Management version 2 Kernel driver in use: sis190 Kernel modules: sis190 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device 1b27 Flags: bus master, medium devsel, latency 64, IRQ 17 I/O ports at c800 [size=8] I/O ports at c400 [size=4] I/O ports at c000 [size=8] I/O ports at bc00 [size=4] I/O ports at b800 [size=16] I/O ports at b400 [size=128] Capabilities: [58] Power Management version 2 Kernel driver in use: sata_sis Kernel modules: sata_sis 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fdf00000-fdffffff Capabilities: [b0] Subsystem: Silicon Integrated Systems [SiS] Device 0004 Capabilities: [c0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [f4] Power Management version 2 Kernel driver in use: pcieport 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=06, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe000000-febfffff Prefetchable memory behind bridge: 00000000f6000000-00000000f8ffffff Capabilities: [b0] Subsystem: Silicon Integrated Systems [SiS] Device 0004 Capabilities: [c0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Root Port (Slot+), MSI 00 Capabilities: [f4] Power Management version 2 Kernel driver in use: pcieport 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller Subsystem: ASUSTeK Computer Inc. Device 17b3 Flags: bus master, medium devsel, latency 0, IRQ 18 Memory at f9ff4000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce GT 130M] (rev a1) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 2021 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fc000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fa000000 (64-bit, non-prefetchable) [size=32M] I/O ports at dc00 [size=128] [virtual] Expansion ROM at fde80000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Kernel driver in use: nvidia Kernel modules: nvidia-current, nouveau, nvidiafb 02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Device 1a3b:1067 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fdff0000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Kernel driver in use: ath9k Kernel modules: ath9k 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at febfe000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable- Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 lsusb Bus 003 Device 002: ID 0b05:1751 ASUSTek Computer, Inc. BT-253 Bluetooth Adapter Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader Bus 001 Device 002: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub dmesg trying to post dmesg exceeded the stackexchange posting limit of 30K... but nothing there is usb 3.0

    Read the article

  • Getting file system free space

    - by Fred Riley
    This isn't a problem as such, more a request for information based on ignorance of the Linux filesystem. The very short question is: How do I find out how much free and used space there is on the volume from which Ubuntu is running? More detail: I'm running Ubuntu 12.04 from a 64Gb USB3 stick, created from booting up a year-old Ubuntu 12.04 DVD and running Startup Disk Creator. The reason for this is that the Master Boot Record on my hard disk, holding Windoze 7, has gone belly-up, and whilst awaiting a recovery disk I'm running Ubunto off USB or DVD as a 'trial'. (And will continue to run Ubuntu after restoring Windoze, as I've rediscovered my love of the penguin :o)) After installing Ubuntu on the stick I ran the software update app, which downloaded some 450Mb of updates and took a couple of hours to install to the stick. A couple of times I got a message saying that disk space was short. So I looked in the file manager (or whatever it's called these days) and couldn't see the stick listed, just: SYSTEM hard disk (listed as 479Gb Filesystem) two other partitions that had been created by Windoze "4.3GB Filesystem" which when I try to open gives the error "Could not find /cow", and when I try to unmount it tells me I can't because it's not mounted - D'OH!! Edit: screenshot of file manager Edit: screenshot of low disk space warning What I can't see is the USB stick from which I'm running Ubuntu. Where's it gone, anybody know? This is tangentially related to a previous question of mine about system tools, in that I'm trying to get control and knowledge of the system in the newest incarnation of Ubuntu.

    Read the article

  • usb_modeswitch not switching

    - by deniz
    After I upgraded from kernel 2.6.18 to 3.5.3 modeswitch started not to work for me. Although lsusb shows my usb modem, usb_modeswitch does not switch it. My system information is like below. I ran lsusb, dmesg, usb-devices and usb_modeswitch their output is like below. usb_modeswitch instead of switching my modem it says "No devices in default mode found. Nothing to do. Bye.". Can you offer a solution? Kernel: Linux 3.5.3 usb_modeswitch: 1.2.3-1 usb_modeswitch-data: 20120120-1 usbutils: 006-1 libusb: 1.0.8-0.1 root@localhost$ lsusb Bus 002 Device 029: ID 12d1:1446 Huawei Technologies Co., Ltd. root@localhost$ dmesg [70112.477080] usb 2-1.4: new high-speed USB device number 30 using ehci_hcd [70112.567757] scsi49 : usb-storage 2-1.4:1.0 [70112.567842] scsi50 : usb-storage 2-1.4:1.1 [70113.571433] scsi 49:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [70113.572304] scsi 50:0:0:0: Direct-Access HUAWEI TF CARD Storage PQ: 0 ANSI: 2 [70113.574169] sr0: scsi-1 drive [70113.574223] sr 49:0:0:0: Attached scsi CD-ROM sr0 [70113.574250] sr 49:0:0:0: Attached scsi generic sg1 type 5 [70113.574350] sd 50:0:0:0: Attached scsi generic sg2 type 0 [70113.577173] sd 50:0:0:0: [sdb] Attached SCSI removable disk root@localhost$ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 30 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=1446 Rev=00.00 S: Manufacturer=Huawei Technologies S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage root@localhost$ cat /etc/usb_modeswitch.d/12d1\:1446 # Huawei, newer modems TargetVendor= 0x12d1 TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" MessageContent="55534243123456780000000000000011062000000100000000000000000000" root@localhost$ usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1446 -v 12d1 -p 1446 -W * usb_modeswitch: handle USB devices with multiple modes * Version 1.2.3 (C) Josua Dietze 2012 * Based on libusb0 (0.1.12 and above) ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= 0x12d1 DefaultProduct= 0x1446 TargetVendor= 0x12d1 TargetProduct= not set TargetClass= not set TargetProductList="1001,1406,140b,140c,1412,141b,1433,1436,14ac,1506" DetachStorageOnly=0 HuaweiMode=0 SierraMode=0 SonyMode=0 QisdaMode=0 GCTMode=0 KobilMode=0 SequansMode=0 MobileActionMode=0 CiscoMode=0 MessageEndpoint= not set MessageContent="55534243123456780000000000000011062000000100000000000000000000" NeedResponse=0 ResponseEndpoint= not set InquireDevice enabled (default) Success check disabled System integration mode disabled usb_set_debug: Setting debugging level to 15 (on) usb_os_find_busses: Skipping non bus directory devices usb_os_find_busses: Skipping non bus directory drivers usb_os_find_busses: Skipping non bus directory uevent usb_os_find_busses: Skipping non bus directory drivers_probe usb_os_find_busses: Skipping non bus directory drivers_autoprobe Looking for target devices ... No devices in target mode or class found Looking for default devices ... No devices in default mode found. Nothing to do. Bye. Thanks in advance.

    Read the article

  • Detect insertion of media into a drive using windows messages

    - by rschnorenberg
    I am currently using WM_DEVICECHANGE to be notified when new USB drives are connected to the computer. This works great for devices like thumb-drives where as soon as the device arrives it is ready to have files read from it. For devices like SD card readers it does not because the message is sent out once when the device is connected but no message is sent when a user actually inserts a card into the device. Is it possible to detect the insertion of new media into an existing USB device without having to use polling?

    Read the article

  • How to have other divs with a flash liquid layout that fits to the page?

    - by brybam
    Basically the majority of my content is flash based. I designed it using Flash Builder (Flex) and Its in a liquid layout, (everything is in percents) and if im JUST embedding the flash content it scales to the page fine, and i have the flash content set to have a padding of 50 px. I put a header div in fine with no problems, but I have 2 problems, the first being the footer div seems to cover up the buttom of the flash content in IE, but it looks just fine in chrome. How can I solve this? I'm using the stock embed code that Flex provides, I tried to edit the css style for the div which I think is #flashContent and give it a min width and min height but it didnt seem to work, actually anything I did to #flashContent didn't seem to do anything, maybe its not the div i need to be adding that attribute to... And my other problem is I dont even know where to start when it comes to placing a div thats 280width by 600height colum to the right side of the flash content. If i could specify a size for the flash content, and the float it left, and float the colum right, and clear it with the container div id be just fine....But remember the flash content is set to 100% Scale (well techically 100%x80% because it looked better that way). Does anyone know how I can start to deal with creating a more complex scaleable flash layouts that includes other divs? ALL WELL MAINTAINING IE SUPPORT? IE is ruining my life. Here's the code I'm using: (or if it will help you visualize what im trying to do here's the page where im working on setting this up http://apumpkinpatch.com/textmashnew/) <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en"> <head> <title>TextMixup</title> <meta name="google" value="notranslate"> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <link href="css.css" rel="stylesheet" type="text/css" /> <script src="https://ajax.googleapis.com/ajax/libs/jquery/1.5.2/jquery.min.js"></script> <script src="../appassets/scripts/jquery.titlealert.js"></script> <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push(['_setAccount', 'UA-19768131-2']); _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); function tabNotification() { $.titleAlert('New Message!', {interval:200,requireBlur:true,stopOnFocus:true}); } function joinNotification() { $.titleAlert('Joined Chat!', {interval:200,requireBlur:true,stopOnFocus:true}); } </script> <!-- BEGIN Browser History required section --> <link rel="stylesheet" type="text/css" href="history/history.css" /> <script type="text/javascript" src="history/history.js"></script> <!-- END Browser History required section --> <script type="text/javascript" src="swfobject.js"></script> <script type="text/javascript"> var swfVersionStr = "10.2.0"; var xiSwfUrlStr = "playerProductInstall.swf"; var flashvars = {}; var params = {}; params.quality = "high"; params.bgcolor = "#ffffff"; params.allowscriptaccess = "sameDomain"; params.allowfullscreen = "true"; var attributes = {}; attributes.id = "TextMixup"; attributes.name = "TextMixup"; attributes.align = "middle"; swfobject.embedSWF( "TextMixup.swf", "flashContent", "100%", "80%", swfVersionStr, xiSwfUrlStr, flashvars, params, attributes); swfobject.createCSS("#flashContent", "display:block;text-align:left;"); </script> </head> <body> <div id="homebar"><a href="http://apumpkinpatch.com"><img src="../appassets/images/logo/logoHor_130_30.png" alt="APumpkinPatch HOME" width="130" height="30" hspace="10" vspace="3" border="0"/></a> </div> <div id="topad"> <script type="text/javascript"><!-- google_ad_client = "pub-5824388356626461"; /* 728x90, textmash */ google_ad_slot = "1114351240"; google_ad_width = 728; google_ad_height = 90; //--> </script> <script type="text/javascript" src="http://pagead2.googlesyndication.com/pagead/show_ads.js"> </script> </div> <div id="mainContainer"> <div id="flashContent"> <p> To view this page ensure that Adobe Flash Player version 10.2.0 or greater is installed. </p> <script type="text/javascript"> var pageHost = ((document.location.protocol == "https:") ? "https://" : "http://"); document.write("<a href='http://www.adobe.com/go/getflashplayer'><img src='" + pageHost + "www.adobe.com/images/shared/download_buttons/get_flash_player.gif' alt='Get Adobe Flash player' /></a>" ); </script> </div> <noscript> <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="100%" height="80%" id="TextMixup"> <param name="movie" value="TextMixup.swf" /> <param name="quality" value="high" /> <param name="bgcolor" value="#ffffff" /> <param name="allowScriptAccess" value="sameDomain" /> <param name="allowFullScreen" value="true" /> <!--[if !IE]>--> <object type="application/x-shockwave-flash" data="TextMixup.swf" width="100%" height="80%"> <param name="quality" value="high" /> <param name="bgcolor" value="#ffffff" /> <param name="allowScriptAccess" value="sameDomain" /> <param name="allowFullScreen" value="true" /> <!--<![endif]--> <!--[if gte IE 6]>--> <p> Either scripts and active content are not permitted to run or Adobe Flash Player version 10.2.0 or greater is not installed. </p> <!--<![endif]--> <a href="http://www.adobe.com/go/getflashplayer"> <img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash Player" /> </a> <!--[if !IE]>--> </object> <!--<![endif]--> </object> </noscript> <div id="convosPreview">This is a div I would want to appear as a colum to the right of the flash content that can scale</div> <!---End mainContainer --> </div> <div id="footer"> <a href="../apps.html"><img src="../appassets/images/apps.png" hspace="5" vspace="5" alt="random chat app apumpkinpatch" width="228" height="40" border="0" /></a><a href="https://chrome.google.com/webstore/detail/hjmnobclpbhnjcpdnpdnkbgdkbfifbao?hl=en-US#"><img src="../appassets/images/chromeapp.png" alt="chrome app random video chat apumpkinpatch" width="115" height="40" vspace="5" border="0" /></a><br /><br /> <a href="http://spacebarup.com" target="_blank">©2011 Space Bar</a> | <a href="../tos.html">TOS & Privacy Policy</a> | <a href="../help.html">FAQ & Help</a> | <a href="../tips.html">Important online safety tips</a> | <a href="http://www.facebook.com/pages/APumpkinPatchcom/164279206963001?sk=app_2373072738" target="_blank">Discussion Boards</a><br /> <p>You must be at least 18 years of age to access this web site.<br />APumpkinPatch.com is not responsible for the actions of any visitors of this site.<br />APumpkinPatch.com does not endorse or claim ownership to any of the content that is broadcast through this site. </p><h2>A Pumpkin Patch is BRAND NEW and will be developed a lot over the next few months adding video chat games, chat rooms, and more! Check back often it's going to be a lot of fun!</h2> </div> </body> </html> myCSS: html, body { height:100%; } body { text-align:center; font-family: Helvetica, Arial, sans-serif; margin:0; padding:0; overflow:auto; text-align:center; background-color: #ffffff; } object:focus { outline:none; } #homebar { clear:both; text-align: left; width: 100%; height: 40px; background-color:#333333; color:#CCC; overflow:hidden; box-shadow: 0px 0px 14px rgba(0, 0, 0, 0.65); -moz-box-shadow: 0px 0px 14px rgba(0, 0, 0, 0.65); -webkit-box-shadow: 0px 0px 14px rgba(0, 0, 0, 0.65); margin-bottom: 10px; } #mainContainer { height:auto; width:auto; clear:both; } #flashContent { display:none; height:auto; float:left; min-height: 500px; min-width: 340px; } /**this is the div i want to appear as a column net to the scaleable flash content **/ #convosPreview { float:right; width:280px; height:600px; }

    Read the article

  • Where can I get an Adobe Flash Page Curl / Flip / Peel Effect tutorial?

    - by nutman
    I currently work on a brochure in InDesign. I export as an SWF and apply a page curl effect to it when publishing so I can put it online. It's great. However, I now want to take the brochure to the next level and make each page interactive. To do this I export from InDesign as an XFL (flash format). This gets the brochure into Flash, with each page on a separate frame. I can now make the page interactive; this is also great! All I need to do now is create the page flip effect again, because when you export to XFL you cannot embed a page flip effect on it. The trouble is I can't find a tutorial anywhere for creating this effect. Anyone know where I can find one?

    Read the article

  • How to fix corrupted filesystem (shows as RAW) in USB device?

    - by Erico Yan
    I would like to ask if you know how to fix a corrupted USB? I've tried the diskpart command but it didn't work. The media is write protected. Do you have any idea that is much better? I need to fix it because I have important files in my flash drive. I really need to retrieve it. I saw that the file system is seen as RAW and is unaccessible. I tried error checking, but it requires you to format it. I tried data recovery software but all files come out corrupted. My USB is Imation 4GB. Any suggestions?

    Read the article

  • Formatted mac external hard drive loaded on pc

    - by kjokay
    I have an issue where it appears that an external hard drive which had been formatted on a mac system was loaded as a drive in Windows. Windows is obviously unable to read the data and now the drive won't mount in the mac. It appears that Windows overwrote something concerning the drive's information on what filesystems and types it has on it. Mac diskutility is unable to repair the drive and the partition is showing up in the utility as a FAT32. Using an applexsoft utility, I am able to verify the data is still on this drive, but I'd rather not spend $100 to save these files (its not my hard drive anyways). Is there a way I can use some UNIX commands to find out the partition information on the drive, back the raw data up on it, then restore the data back onto the drive after re-formatting it again?

    Read the article

  • Is it safe to run an operating system from an USB flash drive?

    - by Georg
    I've got a laptop that has a broken harddisk controller. Replacing the motherboard is quite expensive. I thought about buying a flash drive and installing & running the system from it. However, I'm concerned about some things. Speed: Are they fast enough for swap memory (I've got only 1GB RAM installed.) I'm considering buying 2 or 3 of them and making them into a RAID. What about limited write cycles? How long will it last for a system that has a filesystem with journaling enabled? I'd hate to abandon it. Are there significant differences between internal SSD which are used in modern laptops like MacBooks and USB flash drives? What should I expect in 10 years when the memory wear starts kicking in?

    Read the article

  • Super Uninstallers that can be run from a USB Flash Drive?

    - by JFV
    Does anyone know of a 'Super Uninstaller' package that will allow you to run it from a USB Flash Drive? I used to have a CD that was a Super Uninstaller utility that would uninstall anything. I can't seem to find it and I'd like to replace it with one that I can run from a flash drive. I'd like the portability to now have to install it on each computer I'm using it on. Any and all suggestions would be helpful! Thanks! JFV

    Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >