Search Results

Search found 2518 results on 101 pages for 'vmware esxi'.

Page 30/101 | < Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >

  • vmware player won't run on CentOS due to missing /dev/vmmon, what could be the problem?

    - by Graphics Noob
    So I've tried installing vmware player 3.1.4 and 3.1.3 and both times had the same problem, when I try to load a VM I get the error "Could not open /dev/vmmon". When I ls /dev/ I can see there is no "vmmon" device present. When I try running: sudo /etc/init.d/vmware start I get the output: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [FAILED] which shows that the Virtual Machine Monitor fails to load. I tried following the advice on this site and ran vmware-modconfig --console --install-all I notice during the compilation there are no errors, but at the end I get the message: Starting VMware services: VMware USB Arbitrator [ OK ] Virtual machine monitor [FAILED] Virtual machine communication interface [ OK ] VM communication interface socket family [ OK ] Blocking file system [ OK ] Virtual ethernet [ OK ] Unable to start services Out of curiousity I tried: sudo /sbin/insmod /lib/modules/2.6.18-238.9.1.el5xen/misc/vmmod.ko But got the error message: insmod: error inserting 'vmmon.ko': -1 Invalid module format I have a feeling this may be the root of the problem, but I don't know what could be causing it or how to fix it.

    Read the article

  • Can I minimize VMWare Workstation from exclusive mode?

    - by Blorgbeard
    I am running a VM on two monitors, in fullscreen exclusive mode. I would like to be able to minimize the VM and mess around in the Host, then go back to the VM. I can do this by pressing CTRL+ALT to get out of fullscreen mode, but this puts the VM back onto a single monitor, which moves all my VM's windows back to the main virtual screen. This is annoying, because when I come back to the VM, I have to go back to multiple monitor mode, and move windows back to where they should be. Is there a way to temporarily escape from fullscreen exclusive mode, without disturbing multi-monitor layout? I should note that I'm only using exclusive mode to get rid of the popup toolbar that otherwise appears when your mouse gets too close to the top of the screen. If there's another way to kill that, please let me know. My host and guest are both Windows 7 x64, and I'm running VMWare Workstation 8.

    Read the article

  • Getting a VMnet0 error in VMWare workstation after updating host computer from Windows 8 to 8.1

    - by Andrew
    Yesterday, I updated my computer from Windows 8 to 8.1. I have VMWare Workstation 10 running Windows XP on this computer and prior to the update I had no issues connecting to my network. However, since updating, I haven't been able to connect to any network and I'm getting the following error: "The network bridge on device VMnet0 is not running. The firtual machine will not be able to communicate with the host or with other machines on your network. Failed to connect virtual device Ethernet0" I've checked all of my settings which currently have my network adapter set for a bridged connection and under device status "connected" is checked. Not really sure where to go from here, but after doing some research I have seen that others users have reported getting this error when updating the OS (any OS, not windows 8 specifically) of the host computer. Thanks in advance to anyone who can help.

    Read the article

  • Urgent :The desktop currently has no desktop sources

    - by vDeepak
    Although i know there are large no. of post already floating over same issue , but am having no luck so far. I am getting below error message when trying to connect desktop by vmware view client 4: "the desktop currently has no desktop sources............. " My configuration is listed below: using view manager server over VM box. successully deployed 10 desktop VM over View manager and they are persistent mode. previoulsy few users were able to coonect to these desktops successfully under desktop sources i am getting "Domain name\user ID" and under status its showing "Ready" So when any other user who is authenticated trying to access desktop getting above mentioned error message. The other users are unique one who previously never logged in. Also i tried to rebooth the VM desktops assuming they might be locked by another user , but still am getting the same error message. Please help.

    Read the article

  • Growing the size of a VM's disk in VMware

    - by soandos
    I have a VM that I originally gave 10 GB to (using VMware workstation, and Ubuntu 11.10 is the guest OS). I now wish to add to that. I have seen the option to expand the disk size, but all that does is create a new "partition" that Ubuntu can see. Is there a way to expand the size of the primary partition that the guest OS is using? NOTE: I have seen something regarding doing this for a regular Ubunbu OS that requires a boot disk. Is there a way that I can apply that to this VM case? Using Windows 7 64-bit as the host OS EDIT: To be clear, I am trying to resize the boot partition. Edit 2: GParted's resize option is greyed out.

    Read the article

  • network issue ubuntu 8.04 in vmware esx

    - by hoberion
    ok, this is really pissing me off I have one ubuntu 8.04 instance running on vmware (esx) which decided after a reboot to stop resolving dns requests, I also cant connect to it using ssh although I can ping the server and its really that server (when I shutdown the server the ping also stops) stuff I tried: - reboot again :) - nslookup - serverip - setting networking to dhcp - offering some cute kittens to lucifer - removing the virtual nic and adding another (to get a different mac) - migrating the instance to another esx host - drinking 20 cups of espresso - stopped all services - running dnsmasq on another server and connecting to that dns - tcpdumping - disabling ip6 symptoms: cant resolve anything nslookup just says "no servers found..." although I can ping the servers traceroute to gateway doesnt work (even with traceroute -4 -n gatewayip) collegues laughing at me any thoughts

    Read the article

  • VMWare Fusion - Cannot communicate between Host Mac and Virtual Mac running on same machine [migrated]

    - by Jeff Gold
    I'm running a "virtual" Mac OS machine on a Mac running VMWare Fusion. The Virtual Mac is setup with Bridged Networking, and has its own separate IP address. The outside world can connect to either the Mac itself or the virtual Mac via their respective IP addresses just fine, this works great! The problem... the Mac itself cannot connect to the virtual Mac's IP address, nor can the virtual Mac connect to the real Mac's IP address. Some things I've read mention something about enabling VMCI, but I have no idea how to do this, or if this is even the correct solution. Any suggestions?

    Read the article

  • Slow network file access with VMWare Server and Windows 7

    - by garethm
    I have Windows 7 32-bit virtual machine running in a VMWare Server virtual machine. The host is Windows 7 64-bit. When I copy files between them it is extremely slow - it will take several minutes to copy even a 1 MB file. I can upload the file to an website and then download it again almost instantaneously by comparison. Browsing the network is quite zippy and has no problems. I have been unable to set up a HomeGroup between the computers though - the guest always times out without managing to get setup. Any ideas on how I should go about tracking down where the problem is?

    Read the article

  • Create Vmware image from exisiting Ubuntu installation

    - by Tathagata
    I have been stuck on a netbook since last year due to budget constraints, but finally managed to get a decent laptop from a very generous person. Now my ubuntu installation in the netbook has all my development tools, libraries, personal mediawiki, other servers and things that I'm only reminded when the command line complains. I can always ssh into my netbook, but don't want to carry both the computers all the time. Is it possible to create an image from my netbook Ubuntu and use it out of the box in a Vmware player in the new laptop?

    Read the article

  • VMWare - persistent "Host memory status" alarm in vSphere

    - by ewwhite
    I have a particular VMWare ESX 4.1 host that has a very persistent "Host memory status" alarm. This is running on an HP ProLiant DL360 G7 server. The HP ILO and System Management agents don't know any errors. If I clear the alarm in the vSphere client, it returns within a day. I've tried reseating DIMMs, however, the error does not indicate a problem with a specific module. There's another host in the cluster with an identical configuration. It's not exhibiting any issues. Any thoughts? This is touched on briefly on other forums (and here) with no clear resolution.

    Read the article

  • VMware networking - PortChannel or not?

    - by dunxd
    My ESX hosts each have 8 NICS. I have set up 2 NICs for our iSCSI SAN - each is connected to a different SAN switch. 2 NICs are set up for vMotion and Service Console - these are each connected to a different core switch (ports are trunked with VLANs dedicated to vMotion and Management) I now have four ports left over. Currently we have these set up each going into our default VLAN. Two NICs are connected to one core-switch and two are connected to the other. We decided to aggregate the connections to each switch - so they are teamed at the vswitch end, and port channelled at the physical switch end. I am now reading that port channelling these connections is not particularly useful, perhaps even over complicating things. Is there a particular problem with using port channels for VMware? What method provides the best balance between redundancy and performance?

    Read the article

  • VMWare Virtual Center unrecoverable error: (mks)

    - by JGAnhao
    Hi there, I have a ESX3i, build 207095 and i'm having a problem connecting to my VM's using the vmware remote console. On my PC always gives me an error about vmare-remotemks. I can do all of the tasks using VI client, but when a try to open remote console it breaks, the only thing that apears on the black screen is "unknown MKS Event". I can't find a solution to my problem, and i really need to be able to start a remote console from my PC. On my laptop the error doesn't occurs, both machines are Windows 7 x64. Thanks, JGanhão

    Read the article

  • Mac OS X: pushing all traffic through a VMWare VM [closed]

    - by bj99
    I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

    Read the article

  • Advise on VMWare hardware requirements and host OS

    - by edwin.nathaniel
    Hi All, I'm a newbie developer wanting to learn a bit about Virtualization (from the IT point of view, not theoretical/academic). What I'd like to do: Prepare a machine Install VMWare or VirtualBox Prepare 3 Guest OSes (one for Win2k8 server, 2 for Ubuntu Server) Win2k8 will run SQL Server 2k8 and IIS (for ASP.NET MVC deployment) 1 Ubuntu Server for Drupal, SugarCRM, MediaWiki, typical LAMP stuff 1 Ubuntu Server for Java (Tomcat/Jetty + MySQL/PostgreSQL) What I'd like to know: What would be the ideal Host OS such that the Host OS should not spend too many resources on itself but should boost these instances of VMs (e.g: does Win2k8 performs better vs Linux?) What would be the ideal machine for this (preferably AMD base chip) I'm not expecting the best performance out of this setup, just a decent one to host one drupal instance, one ASP.NET MVC (future, not now), and one Tomcat/Jetty instance. NB: If you have a better suggestions on the setup, feel free to let me know (e.g: maybe Drupal and Tomcat can be in one instance but move the database to another instance instead of 1 instance map to 1 webserver and 1 dbserver). Thank you.

    Read the article

  • No resizing / Auto fit and Unity with Ubuntu 9.10 as Guest at all

    - by andyt25
    Hi! Problem 1: I have Ubuntu 9.10 installed and Workstation 7.01. All VMs (WinXP, Win7, Debian) I run do not resize any more. Problem 2: Unity Mode "Bar" works for short and disapears after seconds .. opened programs with unity mode work well, but the bar disapears History: I changed from Ubuntu 9.04 to 9.10, no VM was moved or changed. Latest VMWare Tools are installed, Auto fit Guest is activated. I am quite sure, that resizing / auto fitting and Unity Mode worked well with Ubuntu 9.04 thx for a hint, i hope didn't overlook something ..

    Read the article

  • How to configure vmware in this situation?

    - by Yousui
    Hi guys, Now I'm using a router to connect my computer to the Internet. I installed VMware Workstation 7 on my computer and installed a guest OS which is CentOS 5.3. Now I want to using putty to connect to the guest OS in my host computer, and I need the guest os can access the Internet too. How can I configure my host's network, guest os and my router? I have little knowledge about network, can you guys give me a step by step direction or something similar? Great thanks!

    Read the article

  • VMware - I/O error - how to fix?

    - by Maya-G
    I'm running XP pro on VMware - it mounts and runs just fine. However, if I power down the VM and try to copy it, or even if I try to do a simple Mac Backup (using Carbon Copy Cloner), I get an i/o error at one very specific VMDK file. Here's a sample of the error - this from CCC: "12/20 22:49:30 Detected input/output error 12/20 22:49:33 rsync: read errors mapping "/Users/blahblah/Documents/Virtual Machines.localized/WindowsXP-Professional150G.vmwarevm/WindowsXP-Professional150G-000001-s065.vmdk": Input/output error (5)" How can I regain my ability to do backups of my Mac without this I/O error?

    Read the article

  • Allow VMWare client to connect only via VPN

    - by Frank Meulenaar
    I have a VMWare (currently using Workstation on Vista, but thinking about switching to ESX) client with Windows XP. I've installed OpenVPN in the client and it connects to the corporate VPN server. I want to make sure that all traffic from the Windows XP machine goes trough this VPN tunnel, but I can't change any settings on the corporate VPN server. Is it possible to restrict the internet connectivity of the Windows XP client in such a way that it can only send packets to the IP of the corporate VPN server? In that way it'd be impossible for packets to bypass the tunnel. I've looked at NAT configurations but couldn't see how I could make this setup.

    Read the article

  • VMware - Not printing in order

    - by nate
    I am using vmware workstation 7. Guest is Windows XP. The host OS is Windows 7. When I queue the printer with multiple documents, the printer doesn't print in order. It seems to print the smaller size in data of documents first. The printer is an HP printer. This is what I have tried so far: I have tested this on the host machine, and it works fine. I have tested this on other host machines(XP Windows7), and it works fine. I have tested other HP printers I have tested it another another guest OS Windows 7 I have tested different drivers Thanks in advance for any help on this one!

    Read the article

  • VMWare Fusion cannot connect to the NAT connection on my Mac

    - by FFish
    I have been using VMWare Fusion on my Mac to check out my websites on localhost. Now I can't connect anymore with the NAT connection. There seems to be a problem with my IP address or Mac address? I have no idea what causes this, it was working fine before!? In the XP (SP2) VM, in the taskbar I see the Local Area Connection with the yellow warning icon. The bubble says: "This connection has limited or no connectivity. You might not be aisle to access the Internet or some network resources. For more information, click this message." Doing that opens up the Local Area Connection Status panel. In the Support tab, when I click the repair button I get following message: "Windows could not finish repairing the problem because the following action cannot be completed: Renewing IP address." Any help would be greatly appreciated.

    Read the article

  • Linux with Windows XP vmware guest unable to access certain Internet hosts

    - by unknown
    hi I have annoying problem. My setup is the following: debian Linux, 64 bits, VMWare workstation 7 host, with Windows XP running as guest. From Firefox, or Internet Explorer, I am unable to access few sites, for example nvidia.com, osdir. Basically get connection timed out, on the other hand ping works to those sites. Moreover, Slashdot loads very very slow and sometimes gets horrible text-only version. everything works fine on Linux host I suspect it has something to do with routing on Linux, I recall having similar problem long time ago, which was fixed by setting something in /proc. I tried setting MTU and TCP window size on Windows lower, but did not help Any idea what is going on?

    Read the article

  • Install VMWare Tools from VMWare Workstation 7.1.1 build-282343 on Debian squeeze: complaint about gcc path not valid

    - by Misha Koshelev
    Dear All: I am trying to install VMWare tools on Debian Squeeze. My error: Before you can compile modules, you need to have the following installed... make gcc kernel headers of the running kernel Searching for GCC... The path "/usr/bin/gcc" is not valid path to the gcc binary. Would you like to change it? [yes] uname -a: Linux debian 2.6.32-5-686 #1 SMP Sat Sep 18 02:14:45 UTC 2010 i686 GNU/Linux dpkg -l | grep make ii make 3.81-8 An utility for Directing compilation. dpkg -l | grep gcc ii gcc 4:4.4.4-2 The GNU C compiler ii gcc-4.4 4.4.4-8 The GNU C compiler ii gcc-4.4-base 4.4.4-8 The GNU Compiler Collection (base package) ii libgcc1 1:4.4.4-8 GCC support library whereis gcc gcc: /usr/bin/gcc /usr/lib/gcc Thank you Misha

    Read the article

  • How to share a VPN connection in a VMWare Guest VM with the Host

    - by Jonathan
    The need - This question is relevant for all of those who want to bypass their corporate's annoying VPN, and access their work/corporate network from their private computer, especially if the corporate VPN client software can't run on their private computer. Homework: this question is very similar to this one and this one, which aren't answered :( The challange - Can't run the corporate VPN client from the private computer, so converted the work laptop to a VMWare Virtual Machine. The VPN client is working fine inside the Guest VM, now we want to share it with the Host (the private computer) The specs: * The private computer (Host OS) is Mac OS X Lion 64bit * The corporate laptop (Guest VM) is WinXP 32bit, running in Bridged network mode * The VPN client on the Guest VM is is Checkpoint SecuRemote NGX R60 HFA03 * While the VPN is running in the Guest VM, the Host can still ping the Guest and vice versa

    Read the article

  • VMWare OVA file

    - by Matteo Mosca
    I've received an .OVA file and I need to be aple to open/parse it. When I try to open it with VMware player, I get the following error: "Failed to open virtual machine: Failed to query source for information." When I try to open it with the Converter standalone client I get: "Unable to parse the OVF file" The extension can be OVF or OVA so I did choose the right file tipe from the open file dialog. If anyone had similar experience and solved it, please let me know. Thanks.

    Read the article

  • Using physical disk with VMware Workstation

    - by chx
    I am using VMware Workstation 9.0 under Windows 7 and trying to load my Linux from Physicaldisk0. And it boots, grub sees the two partitions on the disk (I checked in command line) and the kernel and the initrd loads and then it stops saying "device not found"and drops me into an emergency shell. Indeed there is absolutely nothing in /dev not the /sda device it expects not /hda nothing that looks like a disk. Edit: I can boot the Linux disk just fine if I boot it from BIOS and not as a VM. Edit2: The question is, how can I make this setup work?

    Read the article

< Previous Page | 26 27 28 29 30 31 32 33 34 35 36 37  | Next Page >