Search Results

Search found 11003 results on 441 pages for 'usb storage'.

Page 300/441 | < Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >

• Windows Media Center says "Searching for tuners" when I try to play live TV

  - by Louis

  After upgrading from Windows 8 Pro with Media Center to the 8.1 preview, I need some help in being able to watch live TV again. When I try to now, it says Please Wait. Searching for tuners. I tried reinstalling the software for the Hauppauge WinTV DCR-2650 TV tuner, and upgrading the firmware for both the tuner and the Cisco STA-1520 tuning adapter. I also tried swapping around the USB ports, cold-booting the devices, and running the Set Up TV Signal setting in WMC, but that says The TV signal cannot be configured because a TV tuner was not detected. Both devices look fine in Device Manager, reporting the "This device is working properly" status. I'm not sure if this is related, but I did have some network connectivity issues immediately after upgrading to Windows 8.1 where my either my subnet mask or default gateway was missing, and since the TV tuner shows up as a network device, I wonder if that might be related. However, I really don't know how those settings should look and Hyper-V sort of further complicates things with the virtual Ethernet adapters:

  Read the article

• what is acceptable datastore latency on VMware ESXi host?

  - by BeowulfNode42

  Looking at our performance figures on our existing VMware ESXi 4.1 host at the Datastore/Real-time performance data Write Latency Avg 14 ms Max 41 ms Read Latency Avg 4.5 ms Max 12 ms People don't seem to be complaining too much about it being slow with those numbers. But how much higher could they get before people found it to be a problem? We are reviewing our head office systems due to running low on storage space, and are tossing up between buying a 2nd VM host with DAS or buying some sort of NAS for SMB file shares in the near term and maybe running VMs from it in the longer term. Currently we have just under 40 staff at head office with 9 smaller branches spread across the country. Head office is runnning in an MS RDS session based environment with linux ERP and mail systems. In total 22 VMs on a single host with DAS made from a RAID 10 made of 6x 15k SAS disks.

  Read the article

• Cannot find grldr in all devices

  - by blockhead

  I'm running wubi on XP machine. Started out originally with 8.04, and gradually upgraded to 10.04. Recently, I was creating linux bootable USB drive, and put it in my system to see if it would work. After booting the LiveOS, and rebooting my machine, I know get the error Cannot find grldr in all devices when booting Ubuntu. I don't know what grldr is, but I assume it is the GRUB Loader. Did booting the LiveOS screw with my MBR perhaps? How can I fix this, and if not, is it possible to reinstall wubi, without losing anything of what I have now?

  Read the article

• Mouse scroll wheel in Citrix

  - by molecule

  Hi all, One of my users is experiencing a problem whereby the mouse scroll does not work on the Citrix published application. I have tried to install mouse drivers on his local PC as well as swapping the USB with a PS/2 mouse but still no go. I have researched this issue for a few days but have not been able to find a fix. PC is running Windows XP and ICA client is version 10 I am pretty sure its a problem local to that PC since every other user using the application published on the same server are not having any issues. What could it be?

  Read the article

• keyboard key mapping gone haywire

  - by arvind

  I have a Sony VGN-CR353 running Windows 7 Ultimate. For typing purposes I use two keyboards: The Inbuilt Laptop Keyboard A Standard External Desktop Grade USB Keyboard Since yesterday, My inbuilt keyboard's keys have gone all awry. This is Similar to http://superuser.com/questions/11537/keyboard-keys-not-working-or-resulting-in-the-wrong-key But the high point is that the external keyboard is working just fine. I have already tried System Restore, Reinstalling Keyboard Drivers etc. but to no avail. This is really bugging. Please Help. Thanks in Advance.

  Read the article

• Changing privilege rights on Arch Linux for a particular program

  - by sherrellbc

  I am quite new to linux and have had issues surrounding every program that I install. Basically, anything that is placed outside of my home directory requires a sudo call prior to opening/executing. I cannot write to files, open usb devices, or run programs that exist outside of this directory (specifically, above this directory). I know this is a privilege problem, but I come here to ask how this can be permanently stopped. How can I configure things such that when programs are installed I do not have to manually find the executable and change its privilege requirements?

  Read the article

• Wyse Z Class Thin Client (WES7) Image Deployment

  - by nsr81

  We are currently working on deploying a few Wyse WES7 thin clients (Z Class, exact model escapes me at the moment). We have WDM setup, and are able to see new clients show up, interact with them, pull/push images. Our current workflow is something like this: Unpack & boot up the device Disable Windows Firewall, reboot Device shows up in WDM Publish our custom image to the new device. My question is whether or not there is a way I can bypass step 2, and put my image on the client right out of the box. Either using PXE or USB boot disk, such that I can boot into some sort of menu and tell the client to pull a particular image from the WDM server. With HP thin clients, we have a rule setup which detects new clients on the network and pushes our custom image to them first time they show up. I haven't been able to figure it out with Wyse.

  Read the article

• Symmetrix gatekeepers on Solaris 10

  - by Milner

  I have some Solaris machines that are connected to EMC Symmetrix for SAN storage. Apparently the Symm has a gatekeeper device that is used with the symmetrix CLI. We don't need the CLI, but I have these gatekeeper devices that constantly fill /var/adm/messages and the like with corrupt label errors. Is there anything I can do (short of deleting the devices on machine start) to get rid of them? Or should I just try to get our SAN guy to get the installer for the CLI? These things are getting annoying, and the devfsadmd daemon keeps rediscovering them on boot.

  Read the article

• Differencing Disks in VirtualBox

  - by PhilPursglove

  I'm struggling to understand how to do differencing disks in VirtualBox v3.1.0. I've created a Windows 2008 Server, but now I want to use that as a base image for a number of other servers. The help file has a description of what differencing disks are, but I can't find where it actually tells you how to do it. In the Storage dialog for a server I found the Differencing Disks checkbox: but when I check it, I'd expect it to then ask which image should be the parent so I could select my base image. Any pointers you can offer would be greatly appreciated!

  Read the article

• Does this file format exist?

  - by Jon Chase

  Is there a file format that handles the following use case... I'd like to create a tar file (or whatever - I'm just using tar here b/c it's a well known file format for containing multiple files) that would be usable even if I only had access to specific chunks of said file. For example, say I tar up my mp3 and photo collection into a 100GB tar file, then put the file into some long term storage somewhere. Later, I want to access a specific mp3 file. I don't want to download the entire 100GB tar file just to get to one mp3. In fact, let's say I can't download the entire 100GB tar file. Instead, I'd like to say "give me megabytes 10 through 19 of the 100GB tar file" and then have the mp3 magically extracted from those 10 megabytes. Does a file format like this exist?

  Read the article

• How to understand the LSI HBA connector specs?

  - by Sandra

  When reading the specifications for the LSi SAS 9206-16e HBA, it says Storage Connectivity; Data Transfer Rates * 16 ports; 6Gb/s SAS 2.1 compliant SAS Bandwidth * Half Duplex 2400MB/s, x4, 6Gb/s SAS lanes Port Configurations * 16 ea, x1 ports (individual drives) * 4 ea, x4 wide ports * 2ea, x8 wide ports Connectors * Four (x4) mini-SAS HD external connectors (SFF8644) So there are 4 physical connectors. Question What is the bandwidth for each of the connectors? I would be temped to say 6Gb/s * 4, but then it mentions the "Port Configurations" and 2ea, 4ea, 16ea, which I don't understand what is. Does this mean, that the 4 physical connectors are not identical?

  Read the article

• Is there a Linux distro that will easily run "embedded style" on a Raspberry Pi?

  - by Dan Harper

  I need a Linux distro that will give me the following: Run on a Raspberry Pi Can reliably survive power loss (like via a read-only filesystem) I've been able to hunt down some documentation on how to change a regular Linux distro over to read-only mode. I was hoping that there would be a distro already built that was designed to run in an embedded environment. I don't need many packages or drivers, just enough to have the Pi working with USB/Ethernet. I don't need any GUI interface or anything, this will just be running a custom service built in C. Does anyone know of a distro that would fit?

  Read the article

• Dedicated NIC or dedicated port for iSCSI?

  - by Newt

  When spec'ing and configuring a machine that will utilise shared iSCSI storage, I've read a lot of documentation which suggests a dedicated network adapter should be used for iSCSI communication. That makes a lot of sense and I have no problem with it. The question I do have, is this - should that suggestion be taken to mean that a separate physical NIC should be used, or will a dedicated port/ports on a dual/quad port NIC be just as good? My suspicion is that simply using dedicated port(s) on a shared NIC would be just as good. Any input greatly appreciated.

  Read the article

• Can I use a SD card as cache instead of a Solid State Drive

  - by user654628

  I just installed a solid state drive a few days ago and I have been reading about how to preserve the file of it. I am running Windows 8 and my SSD has 256G of storage. I am using a laptop and cannot carry an external hard drive connected to my laptop to hold cache, temp files etc. I was wondering if a SD card would work. So I would use the SD card to hold cache, temp files and maybe index files from Windows, would this work and be effective (since I believe sd cards will also wear out)?

  Read the article

• MS Office Communicator: Long delays in setting up audio connection when starting a call

  - by geofftnz

  I am using Microsoft Office Communicator with a USB headset as my work phone. OCS is connected to our PABX so we can take and make calls to regular, non-OCS phones. When making an external call to a cellphone, it can take up to 5-10 seconds for audio to start flowing. eg: Work Phone Cellphone - dial cellphone (ringing) (ringing) answer cellphone (hearing nothing) speak "1" . speak "2" . speak "3" . ... . speak "14" hear "15" speak "15" hear "16" speak "16" Has anyone experienced this kind of thing with an OCS setup? Any pointers?

  Read the article

• Windows Home Server style redundancy/multi-disk-support on Windows Server 2008 R2?

  - by user19597

  I'm setting up a fileserver for our department. It'll be connected to the domain. I want it to have a very large amount of storage (several TB). Ideally, it should also preserve disk space by identifying identical files and only storing them once. It should be fault tollerant so that if one of the drives fails, that drive can be replaced without losing any data. All of these features are available in Microsoft's consumer offering - Windows Home Server. However, I can't find these kind of features within the enterprise Windows Server 2008 R2. Am I missing something? I know that I could buy a Drobo, or similar, and use this instead. However, I would prefer to use a built-in feature of Windows Server should it exist. It seems surprising to me that these features should be available in Home Server but not in an enterprise fileserver.

  Read the article

• Choosing a very basic Linux distro with minimal boot time?

  - by user30961

  I've had Ubuntu for a year now, like it but it doesn't match my needed configuration for my old laptop. So... I am using Linux mainly for webapps so I don't care much about user interface. What I need is a distro which is small enough to install on a SD memory card (or USB) since I am removing the hard drive, all my data is in the cloud. I also want it to have as short boot time as possible. I tried Puppy Linux and it seems ok but it had preinstalled looots af small apps I don't need, I would really like to have a distro with minimal preinstallations and add them on my own. So what are my choices and why would you recommend these?

  Read the article

• How can I recover a huge folder that's been converted to a zero kb file on an NTFS partition?

  - by aalaap

  I have a 1TB drive with two 500GB partitions. One of them is being used as a Mac OS X Time Machine back up drive and the other one was NTFS and being used for storage. I had my entire 'iTunes Music' folder stored on it. Recently, there were some errors on the NTFS drive that caused chkdsk to run when in Windows, and it removed a lot of corrupt files. In this process, it converted my 'iTunes Music' folder into one zero KB file. How can I recover this? The partitions are intact and the other data on the disk is still accessible. It's just the 'iTunes Music' folder that's gone.

  Read the article

• Print server not being recognized after switching router and upgrading to 64 bit

  - by picardo

  I recently upgraded Windows 7 from 32 bit to 64 bit. I also switched my router from a very old model of Netgear to TP-Link. Before these updates, I had been using a USB print server by IOGear. After the updates, I took care to reinstall the drivers for both the print server and the printer, and picked the option to install a printer via TCP/IP, but no matter what I did, the driver software couldn't locate the print server on my network. I hit refresh, restarted my machine, turned off the firewalls and tried again. Still nothing. I'm at my wit's end. What else is left to try? Edit: More info. The print server is connected to the router via LAN line. The computer is connected to the router with a wireless connection.

  Read the article

• Can't Install Windows 2008 R2 on Lenovo Laptop With SSD

  - by Ben

  I am trying to install Windows Server 2008 R2 on a new Lenovo X201 or T410 laptop. Setup halts with the following pop-up: A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the windows installation media is in the CD/DVD drive you can safely remove it for this step. The CD drive is obviously working, as it's booting from CD to get to this point. The only thing I can think is that it is to do with the fact they have SSD disks in - but that's just a guess. (Edit - One extra thing that may or may not be relevant: it's the 64 bit version of Server 2008 R2)

  Read the article

• Logitech MK300 : "no driver found"

  - by Oystein

  Hi I bought kewyboard and mouse from Logitech. The model is MK300. I wanna run 64-bits Windows 7 with this. When I connect the USB-receiver, Windows is trying to install it but gives me the error message: "no driver found". I tried to download SetPoint 4.80, but that didn't help. I have rebooted the computer several of times, tried different USB'ports, and have allso tried menye different mouses from Logitech. Non of this works. Have someone any suggestions for how I can fix my problem?

  Read the article

• Does the Win XP/7 dual boot "missing restore points" problem apply to systems with separate hard disks for each O/S?

  - by Robert Oschler

  I'm in the process of installing Windows 7/64 on a system with Windows XP/32 on it. During my research, I read about a problem that occurs in the dual boot scenario where Windows XP deletes Windows 7's restore points when it accesses the Windows 7 volume: http://support.microsoft.com/kb/926185 I found a workaround but it seems pretty painful since it appears to involve using the registry to make the Windows 7 volume appear invisible or "offline" to Windows XP, making sharing disk data between the two O/S annoying since you have to use something like an external storage device to get it done: http://www.vistax64.com/tutorials/127417-system-restore-points-stop-xp-dual-boot-delete.html I was wondering if this problem only occurs with systems that have both O/S installed on the same physical hard drive (in different partitions)? In my case, I will have each O/S on a completely separate physical hard drive. Any other tips would be appreciated. -- roschler

  Read the article

• Windows lowers volume because of "communication"

  - by SnippetSpace

  Randomly, or at system sound (usb connect for example) Windows 8 lowers the volume of all other sources. (Same problem can exist on windows 7, just look online). This is happening because of the "communication detection" made to detect phone calls and then lower volume. But in my case it happens all the time without reason as if windows always considers myself in a call. Do any of you have the same problem? is this a driver issue or a windows issue? I know this has been posted many times but they usually just tell you to turn off the setting above. I'm looking for an explanation or a solution :). Thanks for your feedback and ideas.

  Read the article

• Can single ESXi host make use of two separete iSCSI box?

  - by user71061

  Hi! I have problem with using multiply iSCSI targets with single ESXi host (in my case they are two FreeNAS hosts, but I suspect that this problem will occur with any two iSCSI box of that same type/model). If I configure two FreeNAS hosts as iSCSI targets (say iSCSI A and iSCSI B), then I can use both of them with my ESXi host, but only one at a time (i.e only iSCSI A or only iSCSI B, but not both of them simultaneously). If I try to add second iSCSI target to my iSCSI adapter (of course it has unique iqn name), then in a details pane of this adapter (it is iSCSI software adapter), I see that total number of paths has increased accordingly, but not total number of devices (so I can't use it as another storage). What should I do? It is impossible to attach two iSCSI targets to single adapter? I'm using free version of ESXi 4.1. Maybe it is an limitation of free version? Thanks in advance for any sugestion.

  Read the article

• What is this jumper for on my new motherboard?

  - by jasondavis

  I am building a new PC, I just got my motherboard in the mail today. It is a ASRock X58 Extreme 3. I am reading over the manual for it and one of the jumpers says this. There is a 3 pin jumper labeled 1 2 3, with pins 1 and 2 shorted by default it is "+5v" If I manually change it to short jumper pins 2 and 3 instead of 1 and 2 then it will be "+5vSB (standby) for PS/2 or USB wake up events. So I am confused as to exactly what this is for. Can someone explain what it means, why I would want one other the other?

  Read the article

< Previous Page | 296 297 298 299 300 301 302 303 304 305 306 307  | Next Page >