Search Results

Search found 8979 results on 360 pages for 'dynamic routing'.

Page 301/360 | < Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >

• OpenVPN not sending traffic to internet?

  - by coleifer

  I've set up openvpn on my pi and am running into a small issue. I can connect to the VPN server and ping it just fine, and I can also connect to other machines on my local network. However I am unable, when connected to the VPN, to reach the outside world (either by name lookup or IP). here are the details: On the server the tun0 interface: tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.8.0.1 netmask 255.255.255.255 destination 10.8.0.2 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 I can ping it just fine: # ping -c 3 10.8.0.1 PING 10.8.0.1 (10.8.0.1) 56(84) bytes of data. 64 bytes from 10.8.0.1: icmp_seq=1 ttl=64 time=0.159 ms 64 bytes from 10.8.0.1: icmp_seq=2 ttl=64 time=0.155 ms 64 bytes from 10.8.0.1: icmp_seq=3 ttl=64 time=0.156 ms --- 10.8.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2002ms Routing table # ip route show default via 192.168.1.1 dev eth0 metric 204 10.8.0.0/24 via 10.8.0.2 dev tun0 10.8.0.2 dev tun0 proto kernel scope link src 10.8.0.1 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.6 metric 204 I also have ip traffic forwarding: net.ipv4.ip_forward = 1 I do not have any custom iptables rules (that I'm aware of). On the client, I can connect to the VPN. Here is my tun0: tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.8.0.6 netmask 255.255.255.255 destination 10.8.0.5 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 21 bytes 1527 (1.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 And on the client I can ping it: sudo ping -c 3 10.8.0.6 PING 10.8.0.6 (10.8.0.6) 56(84) bytes of data. 64 bytes from 10.8.0.6: icmp_seq=1 ttl=64 time=0.035 ms 64 bytes from 10.8.0.6: icmp_seq=2 ttl=64 time=0.026 ms 64 bytes from 10.8.0.6: icmp_seq=3 ttl=64 time=0.032 ms --- 10.8.0.6 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.026/0.031/0.035/0.003 ms I can ssh from the client into another server on my LAN (192.168.1.x), however I cannot reach anything outside my LAN. Here's some of the server logs at the bottom of this gist: https://gist.github.com/coleifer/6ef95c3008f130249933/edit I am frankly out of ideas! I don't think it's my client because both my laptop and my phone (which has an openvpn client) exhibit the same behavior. I had OpenVPN installed on this pi before using debian and it worked, so I don't think it's my router but of course anything is possible.

  Read the article

• IntellIJ editor doesn't appear

  - by neveu

  I updated my IntellIJ install to the latest version (11.1.4) and now the Editor window doesn't appear. Double-clicking on the file, jump-to-source, nothing happens. No error message, it just doesn't appear. If I double-click on an xml layout file the preview window works, but no Editor window. Have installed and reinstalled; went back to an earlier version and it doesn't work there either. I'm at a loss. Any ideas? Update: Editor works if I create a new project. Update 2: idea.log file includes this (I don't know what ins.android.sdk.AndroidSdkData is): 2012-11-04 20:40:52,481 [ 2677] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $APP_CONFIG$/macros.xml file is null 2012-11-04 20:40:52,481 [ 2677] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $APP_CONFIG$/macros.xml 2012-11-04 20:40:52,482 [ 2678] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $APP_CONFIG$/quicklists.xml file is null 2012-11-04 20:40:52,482 [ 2678] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $APP_CONFIG$/quicklists.xml 2012-11-04 20:40:52,564 [ 2760] INFO - pl.stores.ApplicationStoreImpl - 76 application components initialized in 1285 ms 2012-11-04 20:40:52,575 [ 2771] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $APP_CONFIG$/customization.xml file is null 2012-11-04 20:40:52,575 [ 2771] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $APP_CONFIG$/customization.xml 2012-11-04 20:40:52,674 [ 2870] INFO - ij.openapi.wm.impl.IdeRootPane - App initialization took 3385 ms 2012-11-04 20:40:53,136 [ 3332] INFO - TestNG Runner - Create TestNG Template Configuration 2012-11-04 20:40:53,138 [ 3334] INFO - TestNG Runner - Create TestNG Template Configuration 2012-11-04 20:40:53,253 [ 3449] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/dynamic.xml file is null 2012-11-04 20:40:53,253 [ 3449] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/dynamic.xml 2012-11-04 20:40:53,280 [ 3476] INFO - api.vfs.impl.local.FileWatcher - 1 paths checked, 0 mapped, 202 mks 2012-11-04 20:40:53,366 [ 3562] INFO - ellij.project.impl.ProjectImpl - 137 project components initialized in 403 ms 2012-11-04 20:40:53,563 [ 3759] INFO - .module.impl.ModuleManagerImpl - 4 modules loaded in 197 ms 2012-11-04 20:40:53,625 [ 3821] INFO - api.vfs.impl.local.FileWatcher - 6 paths checked, 0 mapped, 150 mks 2012-11-04 20:40:54,187 [ 4383] INFO - .roots.impl.DirectoryIndexImpl - Directory index initialized in 271 ms, indexed 1611 directories 2012-11-04 20:40:54,207 [ 4403] INFO - pl.PushedFilePropertiesUpdater - File properties pushed in 18 ms 2012-11-04 20:40:54,237 [ 4433] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $APP_CONFIG$/plainTextFiles.xml file is null 2012-11-04 20:40:54,237 [ 4433] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $APP_CONFIG$/plainTextFiles.xml 2012-11-04 20:40:54,246 [ 4442] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/gant_config.xml file is null 2012-11-04 20:40:54,246 [ 4442] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/gant_config.xml 2012-11-04 20:40:54,253 [ 4449] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/gradle.xml file is null 2012-11-04 20:40:54,253 [ 4449] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/gradle.xml 2012-11-04 20:40:55,855 [ 6051] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/IntelliLang.xml file is null 2012-11-04 20:40:55,855 [ 6051] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/IntelliLang.xml 2012-11-04 20:40:56,995 [ 7191] INFO - leEditor.impl.EditorsSplitters - splitter 2012-11-04 20:40:56,996 [ 7192] INFO - leEditor.impl.EditorsSplitters - splitter 2012-11-04 20:40:57,233 [ 7429] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/codeStyleSettings.xml file is null 2012-11-04 20:40:57,233 [ 7429] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/codeStyleSettings.xml 2012-11-04 20:40:57,234 [ 7430] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/projectCodeStyle.xml file is null 2012-11-04 20:40:57,234 [ 7430] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/projectCodeStyle.xml 2012-11-04 20:40:58,145 [ 8341] INFO - indexing.UnindexedFilesUpdater - Indexable files iterated in 3911 ms 2012-11-04 20:40:58,146 [ 8342] INFO - indexing.UnindexedFilesUpdater - Unindexed files update started: 0 files to update 2012-11-04 20:40:58,146 [ 8342] INFO - indexing.UnindexedFilesUpdater - Unindexed files update done in 0 ms 2012-11-04 20:40:58,362 [ 8558] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/fileColors.xml file is null 2012-11-04 20:40:58,362 [ 8558] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $PROJECT_CONFIG_DIR$/fileColors.xml 2012-11-04 20:41:00,420 [ 10616] INFO - ins.android.sdk.AndroidSdkData - For input string: "20.0.1" java.lang.NumberFormatException: For input string: "20.0.1" at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48) at java.lang.Integer.parseInt(Integer.java:458) at java.lang.Integer.parseInt(Integer.java:499) at org.jetbrains.android.sdk.AndroidSdkData.parsePackageRevision(AndroidSdkData.java:86) at org.jetbrains.android.sdk.AndroidSdkData.<init>(AndroidSdkData.java:73) at org.jetbrains.android.sdk.AndroidSdkData.parse(AndroidSdkData.java:167) at org.jetbrains.android.sdk.AndroidPlatform.parse(AndroidPlatform.java:83) at org.jetbrains.android.sdk.AndroidSdkAdditionalData.getAndroidPlatform(AndroidSdkAdditionalData.java:119) at org.jetbrains.android.facet.AndroidFacet.addResourceFolderToSdkRootsIfNecessary(AndroidFacet.java:532) at org.jetbrains.android.facet.AndroidFacet.access$500(AndroidFacet.java:103) at org.jetbrains.android.facet.AndroidFacet$3.run(AndroidFacet.java:440) at com.intellij.ide.startup.impl.StartupManagerImpl$6.run(StartupManagerImpl.java:230) at com.intellij.ide.startup.impl.StartupManagerImpl.runActivities(StartupManagerImpl.java:203) at com.intellij.ide.startup.impl.StartupManagerImpl.access$100(StartupManagerImpl.java:41) at com.intellij.ide.startup.impl.StartupManagerImpl$4.run(StartupManagerImpl.java:170) at com.intellij.openapi.project.DumbServiceImpl.updateFinished(DumbServiceImpl.java:213) at com.intellij.openapi.project.DumbServiceImpl.access$1000(DumbServiceImpl.java:51) at com.intellij.openapi.project.DumbServiceImpl$IndexUpdateRunnable$1$3.run(DumbServiceImpl.java:363) at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209) at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:702) at java.awt.EventQueue.access$400(EventQueue.java:82) at java.awt.EventQueue$2.run(EventQueue.java:663) at java.awt.EventQueue$2.run(EventQueue.java:661) at java.security.AccessController.doPrivileged(Native Method) at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87) at java.awt.EventQueue.dispatchEvent(EventQueue.java:672) at com.intellij.ide.IdeEventQueue.defaultDispatchEvent(IdeEventQueue.java:699) at com.intellij.ide.IdeEventQueue._dispatchEvent(IdeEventQueue.java:538) at com.intellij.ide.IdeEventQueue._dispatchEvent(IdeEventQueue.java:420) at com.intellij.ide.IdeEventQueue.dispatchEvent(IdeEventQueue.java:378) at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:296) at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:211) at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:201) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:196) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:188) at java.awt.EventDispatchThread.run(EventDispatchThread.java:122) 2012-11-04 20:41:00,459 [ 10655] INFO - ins.android.sdk.AndroidSdkData - For input string: "20.0.1" java.lang.NumberFormatException: For input string: "20.0.1" at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48) at java.lang.Integer.parseInt(Integer.java:458) at java.lang.Integer.parseInt(Integer.java:499) at org.jetbrains.android.sdk.AndroidSdkData.parsePackageRevision(AndroidSdkData.java:86) at org.jetbrains.android.sdk.AndroidSdkData.<init>(AndroidSdkData.java:73) at org.jetbrains.android.sdk.AndroidSdkData.parse(AndroidSdkData.java:167) at org.jetbrains.android.sdk.AndroidPlatform.parse(AndroidPlatform.java:83) at org.jetbrains.android.sdk.AndroidSdkAdditionalData.getAndroidPlatform(AndroidSdkAdditionalData.java:119) at org.jetbrains.android.facet.AndroidFacet.addResourceFolderToSdkRootsIfNecessary(AndroidFacet.java:532) at org.jetbrains.android.facet.AndroidFacet.access$500(AndroidFacet.java:103) at org.jetbrains.android.facet.AndroidFacet$3.run(AndroidFacet.java:440) at com.intellij.ide.startup.impl.StartupManagerImpl$6.run(StartupManagerImpl.java:230) at com.intellij.ide.startup.impl.StartupManagerImpl.runActivities(StartupManagerImpl.java:203) at com.intellij.ide.startup.impl.StartupManagerImpl.access$100(StartupManagerImpl.java:41) at com.intellij.ide.startup.impl.StartupManagerImpl$4.run(StartupManagerImpl.java:170) at com.intellij.openapi.project.DumbServiceImpl.updateFinished(DumbServiceImpl.java:213) at com.intellij.openapi.project.DumbServiceImpl.access$1000(DumbServiceImpl.java:51) at com.intellij.openapi.project.DumbServiceImpl$IndexUpdateRunnable$1$3.run(DumbServiceImpl.java:363) at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209) at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:702) at java.awt.EventQueue.access$400(EventQueue.java:82) at java.awt.EventQueue$2.run(EventQueue.java:663) at java.awt.EventQueue$2.run(EventQueue.java:661) at java.security.AccessController.doPrivileged(Native Method) at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87) at java.awt.EventQueue.dispatchEvent(EventQueue.java:672) at com.intellij.ide.IdeEventQueue.defaultDispatchEvent(IdeEventQueue.java:699) at com.intellij.ide.IdeEventQueue._dispatchEvent(IdeEventQueue.java:538) at com.intellij.ide.IdeEventQueue._dispatchEvent(IdeEventQueue.java:420) at com.intellij.ide.IdeEventQueue.dispatchEvent(IdeEventQueue.java:378) at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:296) at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:211) at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:201) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:196) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:188) at java.awt.EventDispatchThread.run(EventDispatchThread.java:122) 2012-11-04 20:41:01,305 [ 11501] INFO - tor.impl.FileEditorManagerImpl - Project opening took 8374 ms 2012-11-04 20:41:01,719 [ 11915] INFO - dom.attrs.AttributeDefinitions - Found tag with unknown parent: AndroidManifest.AndroidManifestCompatibleScreens 2012-11-04 20:41:07,522 [ 17718] INFO - roid.compiler.tools.AndroidApt - [/Users/neveu/Dev/android-sdk-macosx/platform-tools/aapt] [package] [-m] [--non-constant-id] [-J] [/private/var/folders/xb/hg6cdxt51rs8lylmmjw0fk8m0000gp/T/android_apt_autogeneration6157451500950136901tmp] [-M] [/Users/neveu/Dev/magic_android/3rdParty/facebook/AndroidManifest.xml] [-S] [/Users/neveu/Dev/magic_android/3rdParty/facebook/res] [-I] [/Users/neveu/Dev/android-sdk-macosx/platforms/android-14/android.jar] 2012-11-04 20:41:08,706 [ 18902] INFO - roid.compiler.tools.AndroidApt - [/Users/neveu/Dev/android-sdk-macosx/platform-tools/aapt] [package] [-m] [-J] [/private/var/folders/xb/hg6cdxt51rs8lylmmjw0fk8m0000gp/T/android_apt_autogeneration3143184519400737414tmp] [-M] [/Users/neveu/Dev/magic_android/AndroidManifest.xml] [-S] [/Users/neveu/Dev/magic_android/res] [-I] [/Users/neveu/Dev/android-sdk-macosx/platforms/android-15/android.jar] 2012-11-04 20:41:08,763 [ 18959] INFO - roid.compiler.tools.AndroidIdl - [/Users/neveu/Dev/android-sdk-macosx/platform-tools/aidl] [-p/Users/neveu/Dev/android-sdk-macosx/platforms/android-15/framework.aidl] [-I/Users/neveu/Dev/magic_android/magic/src] [-I/Users/neveu/Dev/magic_android/src] [-I/Users/neveu/Dev/magic_android/3rdParty/Tapjoy] [-I/Users/neveu/Dev/magic_android/gen] [/Users/neveu/Dev/magic_android/src/com/android/vending/billing/IMarketBillingService.aidl] [/Users/neveu/Dev/magic_android/gen/com/android/vending/billing/IMarketBillingService.java] 2012-11-04 20:41:14,004 [ 24200] INFO - dom.attrs.AttributeDefinitions - Found tag with unknown parent: AndroidManifest.AndroidManifestCompatibleScreens 2012-11-04 20:41:18,781 [ 28977] INFO - s.impl.stores.FileBasedStorage - Document was not loaded for $APP_CONFIG$/cachedDictionary.xml file is null 2012-11-04 20:41:18,782 [ 28978] INFO - .impl.stores.XmlElementStorage - Document was not loaded for $APP_CONFIG$/cachedDictionary.xml

  Read the article

• Solution to route/proxy SNMP Traps (or Netflow, generic UDP, etc) for network monitoring?

  - by Christopher Cashell

  I'm implementing a network monitoring solution for a very large network (approximately 5000 network devices). We'd like to have all devices on our network send SNMP traps to a single box (technically this will probably be an HA pair of boxes) and then have that box pass the SNMP traps on to the real processing boxes. This will allow us to have multiple back-end boxes handling traps, and to distribute load among those back end boxes. One key feature that we need is the ability to forward the traps to a specific box depending on the source address of the trap. Any suggestions for the best way to handle this? Among the things we've considered are: Using snmptrapd to accept the traps, and have it pass them off to a custom written perl handler script to rewrite the trap and send it to the proper processing box Using some sort of load balancing software running on a Linux box to handle this (having some difficulty finding many load balancing programs that will handle UDP) Using a Load Balancing Appliance (F5, etc) Using IPTables on a Linux box to route the SNMP traps with NATing We've currently implemented and are testing the last solution, with a Linux box with IPTables configured to receive the traps, and then depending on the source address of the trap, rewrite it with a destination nat (DNAT) so the packet gets sent to the proper server. For example: # Range: 10.0.0.0/19 Site: abc01 Destination: foo01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.0.0.0/19 -j DNAT --to-destination 10.1.2.3 # Range: 10.0.33.0/21 Site: abc01 Destination: foo01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.0.33.0/21 -j DNAT --to-destination 10.1.2.3 # Range: 10.1.0.0/16 Site: xyz01 Destination: bar01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.1.0.0/16 -j DNAT --to-destination 10.3.2.1 This should work with excellent efficiency for basic trap routing, but it leaves us completely limited to what we can mach and filter on with IPTables, so we're concerned about flexibility for the future. Another feature that we'd really like, but isn't quite a "must have" is the ability to duplicate or mirror the UDP packets. Being able to take one incoming trap and route it to multiple destinations would be very useful. Has anyone tried any of the possible solutions above for SNMP traps (or Netflow, general UDP, etc) load balancing? Or can anyone think of any other alternatives to solve this?

  Read the article

• networking tunnel adapter connections?

  - by Karthik Balaguru

  I understand that Tunnel Adapter LAN is for encapsulating IPv6 packets with an IPv4 header so that they can be sent across an IPv4 network. Few queries popped up in my mind based on this :- If i do 'ipconfig', Apart from ethernet adapter LAN details, I get a series of statments as below - Tunnel adapter Local Area Connection* 6 Tunnel adapter Local Area Connection* 7 Tunnel adapter Local Area Connection* 12 Tunnel adapter Local Area Connection* 13 Tunnel adapter Local Area Connection* 14 Tunnel adapter Local Area Connection* 15 Tunnel adapter Local Area Connection* 16 Except for the *16, all the other Tunnel Adapter Local Area Connections show Media Disconnected. Why is the numbering for the Tunnel adapter LAN not sequential? It is like 6, 7, 12, 13, 14, 15, 16. A strange numbering scheme! I tried to figure it out by thinking of some arithmetic series. But, it does not seem to fit in. There is a huge gap between 7 and 12. Any ideas? What is the need for so many Tunnel Adapter LAN connections? Can you tell me a scenario that requires all of those ? I did ipconfig /all to get more information. From the listing, I understand that: 16, 15, 14, 12 are Microsoft 6to4 Adapters 13, 6 are isatap Adapters 7 is Teredo Tunneling Pseudo-interface I understand that the above are for automatic tunneling so that the tunnel endpoints are determined automatically by the routing infrastructure. 6to4 is recommended by RFC3056 for automatic tunneling that uses protocol 41 for encapsulation. It is typically used when an end-user wants to connect to the IPv6 Internet using their existing IPv4 connection. Teredo is an automatic tunneling technique that uses UDP encapsulation across multiple NATs. That is, It is to grant IPv6 connectivity to nodes that are located behind IPv6-unaware NAT devices ISATAP treats the IPv4 network as a virtual IPv6 local link, with mappings from each IPv4 address to a link-local IPv6 address. That is to transmit IPv6 packets between dual-stack nodes on top of an IPv4 network. That is, to put in simple words, ISATAP is an intra-site mechanism, while the 6to4 and Teredo are for inter-site tunnelling mechanisms. It seems that Teredo should alone enabled by default in Vista, But my system does not show it to be enabled by default. Interestingly, it shows a 6to4 tunnel adapter (Tunnel adapter LAN connection 16) to be enabled by default? Any specific reasons for it? If i do ipconfig /all, why is only one Teredo present while four 6to4 are present ? I searched the internet for answers to the above queries, but I am unable to find clear answers.

  Read the article

• Trouble joining Windows Server 2008 to Domain

  - by Jim R

  When I try to join my new server to my existing domain I get the following error: "An attempt to resolve the DNS name of a DC in the domain being joined has failed. Please verify this client is configured to reach a DNS server that can resove DNS names in the target domain." I have tried all of the following already: Successfully pinged the domain controller. Ping the new server from the domain controller by IP address and by DNS name. Ping the DC server from the new server by IP address and by DNS name. Changed the network to DHCP (it was originally static). No joy as static or DHCP. Turned off all firewall settings. Added the domain name to 'hosts' file. Added the server name of the primary domain controller to the 'hosts' file in the new server. Any ideas? Thanks in advance for any help! Jim Update: With help from J. Brian Kelly (Thanks) I have managed to narrow down the problem to a DNS issue. Specifically, UDP/53 packets are being sent (they are seen in Network Monitor), but are not getting to the DNS server. But, I do not yet know why. Update: The quested output from IPCONFIG for the HyperV host and the virtual machine. IPCONFIG from HyperV Server Windows IP Configuration Host Name . . . . . . . . . . . . : HYPER Primary Dns Suffix . . . . . . . : sfi-wfc.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : sfi-wfc.com Ethernet adapter Local Area Connection 4: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Primary Network Physical Address. . . . . . . . . : 00-30-48-CA-CC-7A DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::cd16:3ac2:3d4f:e275%679(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.100.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.100.10 DHCPv6 IAID . . . . . . . . . . . : -1476382648 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-10-20-E9-00-30-48-CA-CC-7A DNS Servers . . . . . . . . . . . : 192.168.100.5 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : Intel(R) 82576 Gigabit Dual Port Network Connection #2 Physical Address. . . . . . . . . : 00-30-48-CA-CC-7B DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPCONFIG from Virtual Machine Windows IP Configuration Host Name . . . . . . . . . . . . : DB Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : sfi Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-66-03-02 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.100.128(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Saturday, August 29, 2009 10:44:45 AM Lease Expires . . . . . . . . . . : Tuesday, September 01, 2009 3:08:33 PM Default Gateway . . . . . . . . . : 192.168.100.10 DHCP Server . . . . . . . . . . . : 192.168.100.5 DNS Servers . . . . . . . . . . . : 192.168.102.5 Primary WINS Server . . . . . . . : 192.168.100.5 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter Local Area Connection* 8: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : isatap.sfi Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Local Area Connection* 9: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 02-00-54-55-4E-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes

  Read the article

• Understanding packet flows over RVI

  - by choco-loo

  I'm trying to get a full grasp of firewall filters and how to apply them on a Juniper EX4200 switch - to be able to block ports, police traffic and shape traffic. The network architecture is as follows internet >-< vlan4000 >-< vlan43 vlan4000 is a public "routed" block (where all the IPs are routed to and the internet gw is) vlan43 is a vlan with public IPs with devices (servers) attached There are static routes and RVI's on the EX4200 to send all traffic via vlan4000's gateway to reach the internet. I've set up filters on both input and output of the respective RVI's and VLAN's - with simple counters, to measure traffic flow from a server inside of vlan43 and a server on the internet. Using a combination of iperf for UDP and TCP tests and fping for ICMP tests - I observed the following, icmp vlan43>internet internet>vlan43 unit4000-counter-in 0 0 unit4000-counter-out 0 0 unit43-counter-in 100 100 unit43-counter-out 0 0 vlan4000-counter-in 6 4 vlan4000-counter-out 107 104 vlan43-counter-in 101 100 vlan43-counter-out 100 100 tcp vlan43>internet internet>vlan43 unit4000-counter-in 0 0 unit4000-counter-out 0 0 unit43-counter-in 73535 38480 unit43-counter-out 0 0 vlan4000-counter-in 7 8 vlan4000-counter-out 73543 38489 vlan43-counter-in 73535 38481 vlan43-counter-out 38938 75880 udp vlan43>internet internet>vlan43 unit4000-counter-in 0 0 unit4000-counter-out 0 0 unit43-counter-in 81410 1 unit43-counter-out 0 0 vlan4000-counter-in 18 7 vlan4000-counter-out 81429 8 vlan43-counter-in 81411 1 vlan43-counter-out 1 85472 My key goals are to set up a few filters and policers, as there will be many more VLANs - that all need protecting from each other and the internet. Then globally limit/police all outbound traffic to the internet Block inbound ports to vlan43 (eg. 22) Limit outbound traffic from vlan43 (to the internet) Limit outbound traffic from vlan43 (to other vlans) Limit outbound traffic from vlan4000 (to the internet from all vlans) Route traffic from vlans via specific routing instances (FBF) The question What I want to understand is why there isn't ever any activity on unit4000 or vlan4000 inbound or outbound counter - is this because there isn't a device on this VLAN - and that the traffic is only traversing it? And with regards to the TCP test - why is there twice as many packets on unit43-counter-in, vlan4000-counter-out and vlan43-counter-in - is this counting both the inbound and outbound traffic?

  Read the article

• Planning trunk capacity for multiple GbE switches

  - by wuckachucka

  Without measuring throughput (it's at the top of the list; this is just theoretical), I want to know the most standard method for trunking VLANs on multiple Gigabit (GbE) switches to a core Layer 3 GbE switch. Say you have three VLANs: VLAN10 (10.0.0.0/24) Servers: your typical Windows DC/file server, Exchange, and an Accounting/SQL server. VLAN20: (10.0.1.0/24) Sales: needs access to everything on VLAN10; doesn't need access to VLAN30 and vice-versa. VLAN20: (10.0.1.0/24) Support: needs access to everything on VLAN10; doesn't need access to VLAN20 and vice-versa. Here's how I think this should work in my head: Switch #1: Ports 2-20 are assigned to VLAN20; all the Sales workstations and printers are connected here. Optional 10GbE combo port #1 is trunked to L3 switch's 10 GbE combo port #1. Switch #2: Ports 2-20 are assigned to VLAN30; all the Support workstations and printers are connected here. Optional 10GbE combo port #1 is trunked to L3 switch's 10 GbE combo port #2. Core L3 switch: Ports 2-10 are assigned to VLAN10; all three servers are connected here. With a standard 10/100 x 24 switch, it'll usually come with one or two 1 GbE uplink ports; carrying over this logic to a 10/100/1000 x 24, the "optional" 10 GbE combo ports that most higher-end switches can get shouldn't really be an option. Keep in mind I haven't tested anything yet, I'm primarily moving in this direction for growth (don't want to buy 10/100 switches and have to replace those within a couple of years) and security (being able to control access between VLANs with L3 routing/packet filtering ACLs). Does this sound right? Do I really need the 10 GbE ports? It seems very non-standard and expensive, but it "feels" right when you think about 40 or 50 workstations trunking up to the L3 switch over 1 GbE standard ports. If say 20 workstations want to download a 10 GB image from the servers concurrently, wouldn't the trunk be the bottleneck? At least if the trunk was 10 GbE, you'd have 10x1GbE nodes being able to reach their theoretical max. What about switch stacking? Some of the D-Links I've been looking at have HDMI interfaces for stacking. As far as I know, stacking two switches creates one logical switch, but is this just for management I/O or does the switches use the (assuming it's HDMI 1.3) 10.2 Gbps for carrying data back and forth?

  Read the article

• "Hostile" network in the company - please comment on a security setup

  - by TomTom

  I have a little specific problem here that I want (need) to solve in a satisfactory way. My company has multiple (IPv4) networks that are controlled by our router sitting in the middle. Typical smaller shop setup. There is now one additional network that has an IP Range OUTSIDE of our control, connected to the internet with another router OUTSIDE of our control. Call it a project network that is part of another companies network and combined via VPN they set up. This means: They control the router that is used for this network and They can reconfigure things so that they can access the machines in this network. The network is physically split on our end through some VLAN capable switches as it covers three locations. At one end there is the router the other company controls. I Need / want to give the machines used in this network access to my company network. In fact, it may be good to make them part of my active directory domain. The people working on those machines are part of my company. BUT - I need to do so without compromising the security of my company network from outside influence. Any sort of router integration using the externally controlled router is out by this idea So, my idea is this: We accept the IPv4 address space and network topology in this network is not under our control. We seek alternatives to integrate those machines into our company network. The 2 concepts I came up with are: Use some sort of VPN - have the machines log into VPN. Thanks to them using modern windows, this could be transparent DirectAccess. This essentially treats the other IP space not different than any restaurant network a laptop of the company goes in. Alternatively - establish IPv6 routing to this ethernet segment. But - and this is a trick - block all IPv6 packets in the switch before they hit the third party controlled router, so that even IF they turn on IPv6 on that thing (not used now, but they could do it) they would get not a single packet. The switch can nicely do that by pulling all IPv6 traffic coming to that port into a separate VLAN (based on ethernet protocol type). Anyone sees a problem with using he switch to isolate the outer from IPv6? Any security hole? It is sad we have to treat this network as hostile - would be a lot easier - but the support personnel there is of "known dubious quality" and the legal side is clear - we can not fulfill our obligations when we integrate them into our company while they are under a jurisdiction we don't have a say in.

  Read the article

• Why does Ubuntu 9.10 hang during boot at "Booting processor 1 APIC 0x1 ip 0x6000"?

  - by BraeburnDev

  I recently installed a new copy of Ubuntu 9.10 (Kernel 2.6.31-14) on to my Hp Pavilion dv6t, so I can setup a Linux development environment. The install went flawlessly and I proceeded with Ubuntu's udate manager's long list of updates (292 in all). I also setup a swap file and activated a Nvidia 185 driver for the Nvidia 260m GPU on the machine. After all this was done I restarted the computer and booted into Ubuntu this time with a newer 2.6.31-19 Kernel which was installed from the update manager. During booth the computer hung at this point: Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013136] Performance Counters: Nehalem/Corei7 events, Intel PMU driver. Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013141] ... version: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013142] ... bit width: 48 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013144] ... generic counters: 4 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013146] ... value mask: 0000ffffffffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013147] ... max period: 000000007fffffff Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013149] ... fixed-purpose counters: 3 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.013151] ... counter mask: 000000070000000f Feb 24 14:23:12 braeburn-laptop kernel: [ 0.015539] ACPI: Core revision 20090521 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052264] Setting APIC routing to flat Feb 24 14:23:12 braeburn-laptop kernel: [ 0.052639] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.152580] CPU0: Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz stepping 05 Feb 24 14:23:12 braeburn-laptop kernel: [ 0.270845] Booting processor 1 APIC 0x1 ip 0x6000 I can post a full kern.log of this boot process if requested. Hopefully this is enough information to go on. I should add that I'm still new to configuring and running a Linux OS although I know enough basic command line usage to do software development. This is my attempt to become more familiar with Linux and manage my own system. I'd like to get some insight on the nature of this system hang, what the problem is and how to resolve it. At this point I can scrap the install if I broke something, but my intuition says this is an issue with the kernel recognizing the correct hardware configuration for my system, or perhaps this is an issue with the APIC drivers managing Nehalem's new power management capabilities? Thanks for looking at this issue and providing feed back.

  Read the article

• how do you make a "concurrent queue safe" lazy loader (singleton manager) in objective-c

  - by Rich

  Hi, I made this class that turns any object into a singleton, but I know that it's not "concurrent queue safe." Could someone please explain to me how to do this, or better yet, show me the code. To be clear I want to know how to use this with operation queues and dispatch queues (NSOperationQueue and Grand Central Dispatch) on iOS. Thanks in advance, Rich EDIT: I had an idea for how to do it. If someone could confirm it for me I'll do it and post the code. The idea is that proxies make queues all on their own. So if I make a mutable proxy (like Apple does in key-value coding/observing) for any object that it's supposed to return, and always return the same proxy for the same object/identifier pair (using the same kind of lazy loading technique as I used to create the singletons), the proxies would automatically queue up the any messages to the singletons, and make it totally thread safe. IMHO this seems like a lot of work to do, so I don't want to do it if it's not gonna work, or if it's gonna slow my apps down to a crawl. Here's my non-thread safe code: RMSingletonCollector.h // // RMSingletonCollector.h // RMSingletonCollector // // Created by Rich Meade-Miller on 2/11/11. // Copyright 2011 Rich Meade-Miller. All rights reserved. // #import <Foundation/Foundation.h> #import "RMWeakObjectRef.h" struct RMInitializerData { // The method may take one argument. // required SEL designatedInitializer; // data to pass to the initializer or nil. id data; }; typedef struct RMInitializerData RMInitializerData; RMInitializerData RMInitializerDataMake(SEL initializer, id data); @interface NSObject (SingletonCollector) // Returns the selector and data to pass to it (if the selector takes an argument) for use when initializing the singleton. // If you override this DO NOT call super. + (RMInitializerData)designatedInitializerForIdentifier:(NSString *)identifier; @end @interface RMSingletonCollector : NSObject { } + (id)collectionObjectForType:(NSString *)className identifier:(NSString *)identifier; + (id<RMWeakObjectReference>)referenceForObjectOfType:(NSString *)className identifier:(NSString *)identifier; + (void)destroyCollection; + (void)destroyCollectionObjectForType:(NSString *)className identifier:(NSString *)identifier; @end // ==--==--==--==--==Notifications==--==--==--==--== extern NSString *const willDestroySingletonCollection; extern NSString *const willDestroySingletonCollectionObject; RMSingletonCollector.m // // RMSingletonCollector.m // RMSingletonCollector // // Created by Rich Meade-Miller on 2/11/11. // Copyright 2011 Rich Meade-Miller. All rights reserved. // #import "RMSingletonCollector.h" #import <objc/objc-runtime.h> NSString *const willDestroySingletonCollection = @"willDestroySingletonCollection"; NSString *const willDestroySingletonCollectionObject = @"willDestroySingletonCollectionObject"; RMInitializerData RMInitializerDataMake(SEL initializer, id data) { RMInitializerData newData; newData.designatedInitializer = initializer; newData.data = data; return newData; } @implementation NSObject (SingletonCollector) + (RMInitializerData)designatedInitializerForIdentifier:(NSString *)identifier { return RMInitializerDataMake(@selector(init), nil); } @end @interface RMSingletonCollector () + (NSMutableDictionary *)singletonCollection; + (void)setSingletonCollection:(NSMutableDictionary *)newSingletonCollection; @end @implementation RMSingletonCollector static NSMutableDictionary *singletonCollection = nil; + (NSMutableDictionary *)singletonCollection { if (singletonCollection != nil) { return singletonCollection; } NSMutableDictionary *collection = [[NSMutableDictionary alloc] initWithCapacity:1]; [self setSingletonCollection:collection]; [collection release]; return singletonCollection; } + (void)setSingletonCollection:(NSMutableDictionary *)newSingletonCollection { if (newSingletonCollection != singletonCollection) { [singletonCollection release]; singletonCollection = [newSingletonCollection retain]; } } + (id)collectionObjectForType:(NSString *)className identifier:(NSString *)identifier { id obj; NSString *key; if (identifier) { key = [className stringByAppendingFormat:@".%@", identifier]; } else { key = className; } if (obj = [[self singletonCollection] objectForKey:key]) { return obj; } // dynamic creation. // get a class for Class classForName = NSClassFromString(className); if (classForName) { obj = objc_msgSend(classForName, @selector(alloc)); // if the initializer takes an argument... RMInitializerData initializerData = [classForName designatedInitializerForIdentifier:identifier]; if (initializerData.data) { // pass it. obj = objc_msgSend(obj, initializerData.designatedInitializer, initializerData.data); } else { obj = objc_msgSend(obj, initializerData.designatedInitializer); } [singletonCollection setObject:obj forKey:key]; [obj release]; } else { // raise an exception if there is no class for the specified name. NSException *exception = [NSException exceptionWithName:@"com.RMDev.RMSingletonCollector.failed_to_find_class" reason:[NSString stringWithFormat:@"SingletonCollector couldn't find class for name: %@", [className description]] userInfo:nil]; [exception raise]; [exception release]; } return obj; } + (id<RMWeakObjectReference>)referenceForObjectOfType:(NSString *)className identifier:(NSString *)identifier { id obj = [self collectionObjectForType:className identifier:identifier]; RMWeakObjectRef *objectRef = [[RMWeakObjectRef alloc] initWithObject:obj identifier:identifier]; return [objectRef autorelease]; } + (void)destroyCollection { NSDictionary *userInfo = [singletonCollection copy]; [[NSNotificationCenter defaultCenter] postNotificationName:willDestroySingletonCollection object:self userInfo:userInfo]; [userInfo release]; // release the collection and set it to nil. [self setSingletonCollection:nil]; } + (void)destroyCollectionObjectForType:(NSString *)className identifier:(NSString *)identifier { NSString *key; if (identifier) { key = [className stringByAppendingFormat:@".%@", identifier]; } else { key = className; } [[NSNotificationCenter defaultCenter] postNotificationName:willDestroySingletonCollectionObject object:[singletonCollection objectForKey:key] userInfo:nil]; [singletonCollection removeObjectForKey:key]; } @end RMWeakObjectRef.h // // RMWeakObjectRef.h // RMSingletonCollector // // Created by Rich Meade-Miller on 2/12/11. // Copyright 2011 Rich Meade-Miller. All rights reserved. // // In order to offset the performance loss from always having to search the dictionary, I made a retainable, weak object reference class. #import <Foundation/Foundation.h> @protocol RMWeakObjectReference <NSObject> @property (nonatomic, assign, readonly) id objectRef; @property (nonatomic, retain, readonly) NSString *className; @property (nonatomic, retain, readonly) NSString *objectIdentifier; @end @interface RMWeakObjectRef : NSObject <RMWeakObjectReference> { id objectRef; NSString *className; NSString *objectIdentifier; } - (RMWeakObjectRef *)initWithObject:(id)object identifier:(NSString *)identifier; - (void)objectWillBeDestroyed:(NSNotification *)notification; @end RMWeakObjectRef.m // // RMWeakObjectRef.m // RMSingletonCollector // // Created by Rich Meade-Miller on 2/12/11. // Copyright 2011 Rich Meade-Miller. All rights reserved. // #import "RMWeakObjectRef.h" #import "RMSingletonCollector.h" @implementation RMWeakObjectRef @dynamic objectRef; @synthesize className, objectIdentifier; - (RMWeakObjectRef *)initWithObject:(id)object identifier:(NSString *)identifier { if (self = [super init]) { NSString *classNameForObject = NSStringFromClass([object class]); className = classNameForObject; objectIdentifier = identifier; objectRef = object; [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(objectWillBeDestroyed:) name:willDestroySingletonCollectionObject object:object]; [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(objectWillBeDestroyed:) name:willDestroySingletonCollection object:[RMSingletonCollector class]]; } return self; } - (id)objectRef { if (objectRef) { return objectRef; } objectRef = [RMSingletonCollector collectionObjectForType:className identifier:objectIdentifier]; return objectRef; } - (void)objectWillBeDestroyed:(NSNotification *)notification { objectRef = nil; } - (void)dealloc { [[NSNotificationCenter defaultCenter] removeObserver:self]; [className release]; [super dealloc]; } @end

  Read the article

• JSF 2.0 Problem

  - by Sarang

  I am doing a project where I am using JSF 2.0 & Primefaces UI Components. There is a tab view component with tabs, "Day","Week" & "Month". In all tab, I have to display Bar Charts in each. For the same, I am fetching three list using the following three method. In the following code, UpdateCountHelper is fetching the data from database. So, UpdateCountHelper is taking some time for fetching data. This is code for fetching lists : public List<UpdateCount> getDayUpdateCounts() { if (projectFlag == true) { if (displayFlag == 1) { dayUpdateCounts = UpdateCountHelper.getProjectUpdates(1); } else { dayUpdateCounts = UpdateCountHelper.getProjectUpdates(name, 1); } } else { dayUpdateCounts = UpdateCountHelper.getResourceUpdates(userName, 1); } return dayUpdateCounts; } public List<UpdateCount> getMonthUpdateCounts() { if (projectFlag == true) { if (displayFlag == 1) { monthUpdateCounts = UpdateCountHelper.getProjectUpdates(30); } else { monthUpdateCounts = UpdateCountHelper.getProjectUpdates(name, 30); } } else { monthUpdateCounts = UpdateCountHelper.getResourceUpdates(userName, 30); } return monthUpdateCounts; } public List<UpdateCount> getWeekUpdateCounts() { if (projectFlag == true) { if (displayFlag == 1) { weekUpdateCounts = UpdateCountHelper.getProjectUpdates(7); } else { weekUpdateCounts = UpdateCountHelper.getProjectUpdates(name, 7); } } else { weekUpdateCounts = UpdateCountHelper.getResourceUpdates(userName, 7); } return weekUpdateCounts; } This is code for UI of Bar Chart : <p:panel id="Chart"> <p:tabView dynamic="false" cache="false"> <p:tab title="Day"> <p:panel id="chartDayPanel"> <center> <h:outputText id="projectWiseDayText" rendered="#{systemUtilizationServiceBean.projectFlag}" value="Project Wise Day Update"/> <p:columnChart id="projectWiseDayUpdateChart" rendered="#{systemUtilizationServiceBean.projectFlag}" value="#{systemUtilizationServiceBean.dayUpdateCounts}" var="dayWiseUpdate" xfield="#{dayWiseUpdate.name}" height="200px" width="640px"> <p:chartSeries label="Project Wise Current Day Update" value="#{dayWiseUpdate.noUpdates}"/> </p:columnChart> <h:outputText id="resourceWiseDayText" rendered="#{systemUtilizationServiceBean.resourceFlag}" value="Resource Wise Day Update"/> <p:columnChart id="resourceWiseDayUpdateChart" rendered="#{systemUtilizationServiceBean.resourceFlag}" value="#{systemUtilizationServiceBean.dayUpdateCounts}" var="dayWiseResourceUpdate" xfield="#{dayWiseResourceUpdate.name}" height="200px" width="640px"> <p:chartSeries label="Resource Wise Current Day Update" value="#{dayWiseResourceUpdate.noUpdates}"/> </p:columnChart> </center> </p:panel> </p:tab> <p:tab title="Week"> <p:panel id="chartWeekPanel"> <center> <h:outputText id="projectWiseWeekText" rendered="#{systemUtilizationServiceBean.projectFlag}" value="Project Wise Week Update"/> <p:columnChart id="projectWiseWeekUpdateChart" rendered="#{systemUtilizationServiceBean.projectFlag}" value="#{systemUtilizationServiceBean.weekUpdateCounts}" var="weekWiseUpdate" xfield="#{weekWiseUpdate.name}" height="200px" width="640px"> <p:chartSeries label="Project Wise Current Week Update" value="#{weekWiseUpdate.noUpdates}"/> </p:columnChart> <h:outputText id="resourceWiseWeekText" rendered="#{systemUtilizationServiceBean.resourceFlag}" value="Resource Wise Week Update"/> <p:columnChart id="resourceWiseWeekUpdateChart" rendered="#{systemUtilizationServiceBean.resourceFlag}" value="#{systemUtilizationServiceBean.weekUpdateCounts}" var="weekWiseResourceUpdate" xfield="#{weekWiseResourceUpdate.name}" height="200px" width="640px"> <p:chartSeries label="Resource Wise Current Week Update" value="#{weekWiseResourceUpdate.noUpdates}"/> </p:columnChart> </center> </p:panel> </p:tab> <p:tab title="Month"> <p:panel id="chartMonthPanel"> <center> <h:outputText id="projectWiseMonthText" rendered="#{systemUtilizationServiceBean.projectFlag}" value="Project Wise Month Update"/> <p:columnChart id="projectWiseMonthUpdateChart" rendered="#{systemUtilizationServiceBean.projectFlag}" value="#{systemUtilizationServiceBean.monthUpdateCounts}" var="monthWiseUpdate" xfield="#{monthWiseUpdate.name}" height="200px" width="640px"> <p:chartSeries label="Project Wise Current Month Update" value="#{monthWiseUpdate.noUpdates}"/> </p:columnChart> <h:outputText id="resourceWiseMonthText" rendered="#{systemUtilizationServiceBean.resourceFlag}" value="Resource Wise Month Update"/> <p:columnChart id="resourceWiseMonthUpdateChart" rendered="#{systemUtilizationServiceBean.resourceFlag}" value="#{systemUtilizationServiceBean.monthUpdateCounts}" var="monthWiseResourceUpdate" xfield="#{monthWiseResourceUpdate.name}" height="200px" width="640px"> <p:chartSeries label="Resource Wise Current Month Update" value="#{monthWiseResourceUpdate.noUpdates}"/> </p:columnChart> </center> </p:panel> </p:tab> </p:tabView> </p:panel> Now, I have to display same data in other tabview with same tabs as mentioned above & only thing is now I have to display in Pie Chart. Now in pie chart, I am using the same lists. So, it will again fetch the data from database & waste time. To solve that problem I have created other three lists & have given only reference of those previous lists. So, now no database fetching occur. The Code for applying the reference is : public List<UpdateCount> getPieDayUpdateCounts() { pieDayUpdateCounts = dayUpdateCounts; return pieDayUpdateCounts; } public List<UpdateCount> getPieMonthUpdateCounts() { pieMonthUpdateCounts = monthUpdateCounts; return pieMonthUpdateCounts; } public List<UpdateCount> getPieWeekUpdateCounts() { pieWeekUpdateCounts = weekUpdateCounts; return pieWeekUpdateCounts; } But, over here the problem occurring is that only chart of which the tab is enable is displayed but the other remaining 2 tabs are not showing any chart. The code for UI is : <p:tabView dynamic="false" cache="false"> <p:tab title="Day"> <center> <p:panel id="pieChartDayPanel"> <h:outputText id="projectWiseDayPieChartText" rendered="#{systemUtilizationServiceBean.projectFlag}" value="Project Wise Day Update"/> <p:pieChart id="projectWiseDayUpdatePieChart" rendered="#{systemUtilizationServiceBean.projectFlag}" value="#{systemUtilizationServiceBean.dayUpdateCounts}" var="dayWisePieUpdate" categoryField="#{dayWisePieUpdate.name}" dataField="#{dayWisePieUpdate.noUpdates}" height="200" width="200"/> <h:outputText id="resourceWiseDayPieChartText" rendered="#{systemUtilizationServiceBean.resourceFlag}" value="Resource Wise Day Update"/> <p:pieChart id="resourceWiseDayUpdatePieChart" rendered="#{systemUtilizationServiceBean.resourceFlag}" value="#{systemUtilizationServiceBean.dayUpdateCounts}" var="dayWiseResourcePieUpdate" categoryField="#{dayWiseResourcePieUpdate.name}" dataField="#{dayWiseResourcePieUpdate.noUpdates}" height="200" width="200"/> </p:panel> </center> </p:tab> <p:tab title="Week"> <center> <p:panel id="pieChartWeekPanel"> <h:outputText id="projectWiseWeekPieChartText" rendered="#{systemUtilizationServiceBean.projectFlag}" value="Project Wise Week Update"/> <p:pieChart id="projectWiseWeekUpdatePieChart" rendered="#{systemUtilizationServiceBean.projectFlag}" value="#{systemUtilizationServiceBean.weekUpdateCounts}" var="weekWisePieUpdate" categoryField="#{weekWisePieUpdate.name}" dataField="#{weekWisePieUpdate.noUpdates}" height="200" width="200"/> <h:outputText id="resourceWiseWeekPieChartText" rendered="#{systemUtilizationServiceBean.resourceFlag}" value="Resource Wise Week Update"/> <p:pieChart id="resourceWiseWeekUpdatePieChart" rendered="#{systemUtilizationServiceBean.resourceFlag}" value="#{systemUtilizationServiceBean.weekUpdateCounts}" var="weekWiseResourcePieUpdate" categoryField="#{weekWiseResourcePieUpdate.name}" dataField="#{weekWiseResourcePieUpdate.noUpdates}" height="200" width="200"/> </p:panel> </center> </p:tab> <p:tab title="Month"> <center> <p:panel id="pieChartMonthPanel"> <h:outputText id="projectWiseMonthPieChartText" rendered="#{systemUtilizationServiceBean.projectFlag}" value="Project Wise Month Update"/> <p:pieChart id="projectWiseMonthUpdatePieChart" rendered="#{systemUtilizationServiceBean.projectFlag}" value="#{systemUtilizationServiceBean.monthUpdateCounts}" var="monthWisePieUpdate" categoryField="#{monthWisePieUpdate.name}" dataField="#{monthWisePieUpdate.noUpdates}" height="200" width="200"/> <h:outputText id="resourceWiseMonthPieChartText" rendered="#{systemUtilizationServiceBean.resourceFlag}" value="Resource Wise Month Update"/> <p:pieChart id="resourceWiseMonthUpdatePieChart" rendered="#{systemUtilizationServiceBean.resourceFlag}" value="#{systemUtilizationServiceBean.monthUpdateCounts}" var="monthWiseResourcePieUpdate" categoryField="#{monthWiseResourcePieUpdate.name}" dataField="#{monthWiseResourcePieUpdate.noUpdates}" height="200" width="200"/> </p:panel> </center> </p:tab> </p:tabView> What should be the reason behind this ?

  Read the article

• The ping response time doesn't reflect the real network response time

  - by yangchenyun

  I encountered a weird problem that the response time returned by ping is almost fixed at 98ms. Either I ping the gateway, or I ping a local host or a internet host. The response time is always around 98ms although the actual delay is obvious. However, the reverse ping (from a local machine to this host) works properly. The following is my route table and the result: route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 100 0 0 eth1 60.194.136.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth1 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 # ping the gateway ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_req=1 ttl=64 time=98.7 ms 64 bytes from 192.168.1.1: icmp_req=2 ttl=64 time=97.0 ms 64 bytes from 192.168.1.1: icmp_req=3 ttl=64 time=96.0 ms 64 bytes from 192.168.1.1: icmp_req=4 ttl=64 time=94.9 ms 64 bytes from 192.168.1.1: icmp_req=5 ttl=64 time=94.0 ms ^C --- 192.168.1.1 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 94.030/96.149/98.744/1.673 ms #ping a local machine ping 192.168.1.88 PING 192.168.1.88 (192.168.1.88) 56(84) bytes of data. 64 bytes from 192.168.1.88: icmp_req=1 ttl=64 time=98.7 ms 64 bytes from 192.168.1.88: icmp_req=2 ttl=64 time=96.9 ms 64 bytes from 192.168.1.88: icmp_req=3 ttl=64 time=96.0 ms 64 bytes from 192.168.1.88: icmp_req=4 ttl=64 time=95.0 ms ^C --- 192.168.1.88 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 95.003/96.696/98.786/1.428 ms #ping a internet host ping google.com PING google.com (74.125.128.139) 56(84) bytes of data. 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=1 ttl=42 time=99.8 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=2 ttl=42 time=99.9 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=3 ttl=42 time=99.9 ms 64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=4 ttl=42 time=99.9 ms ^C64 bytes from hg-in-f139.1e100.net (74.125.128.139): icmp_req=5 ttl=42 time=99.9 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 32799ms rtt min/avg/max/mdev = 99.862/99.925/99.944/0.284 ms I am running iperf to test the bandwidth, the rate is quite low for a LAN connection. iperf -c 192.168.1.87 -t 50 -i 10 -f M ------------------------------------------------------------ Client connecting to 192.168.1.87, TCP port 5001 TCP window size: 0.06 MByte (default) ------------------------------------------------------------ [ 4] local 192.168.1.139 port 54697 connected with 192.168.1.87 port 5001 [ ID] Interval Transfer Bandwidth [ 4] 0.0-10.0 sec 6.12 MBytes 0.61 MBytes/sec [ 4] 10.0-20.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 20.0-30.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 30.0-40.0 sec 6.25 MBytes 0.62 MBytes/sec [ 4] 40.0-50.0 sec 6.38 MBytes 0.64 MBytes/sec [ 4] 0.0-50.1 sec 31.6 MBytes 0.63 MBytes/sec

  Read the article

• Exchange 2007 and migrating only some users under a shared domain name

  - by DomoDomo

  I'm in the process of moving two law firms to hosted Exchange 2007, a service that the consulting company I work for offers. Let's call these two firms Crane Law and Poole Law. These two firms were ONE firm just six months ago, but split. So they have three email domains: Old Firm: craneandpoole.com New Firm 1: cranelaw.com New Firm 2: poolelaw.com Both Firm 1 & Firm 2 use craneandpoole.com email addresses, as for the other two domains, only people who work at the respective firm use that firm's domain name, natch. Currently these two firms are still using the same pre-split internal Exchange 2007 server, where MX records for all three domains point. Here's the problem. I'm not moving both companies at the same time. I'm moving Crane Law two weeks before Poole Law. During this two weeks, both companies need to be able to: Continue to receive emails addressed to craneandpoole.com Send emails between firms, using cranelaw.com and poolelaw.com accounts I also have a third problem: I'd like to setup all three domains in my hosting infrastructure way ahead of time, to make my own life easier What would solve all my problems would be, if there is some way I can tell Exchange 2007, even though this domain exists locally forward on the message to the outside world using public MX record as a basis for where to send it (or if I could somehow create a route for it statically that would work too). If this doesn't work, to address points #1 when I migrate Crane Law, I will delete all references locally to cranelaw.com on their current Exchange server, and setup individual forwards for each of their craneandpool.com mailboxes to forward to our hosted exchange server. This will also take care of point #2, since the cranelaw.com won't be there locally, when poolelaw.com tries to send to cranelaw.com, public MX records will be used for mail routing decisions and go to my hosted exchange. The bummer of that though is, I won't be able to setup poolelaw.com ahead of time in hosted Exchange, will have to wait to do it day of :( Sorry for the long and confusing post. Just wondering if there is a better or simpler way to do what I want? Three tier forests and that kind of thing are out, this is just a two week window where they won't be in the same place.

  Read the article

• Internet Working, Browsing Not.

  - by jeffreypriebe

  I have a very odd problem that I can't resolve. I am connected to the internet, but my browsing doesn't work. I don't mean a web browser - I mean browsing. Firefox, Chrome, Curl all fail to successfully connect to an HTTP address. However existing connections, e.g. to mail in Outlook (Exchange Server and also IMAP server) continue to work. Also, the internet is on, I can confirm both from my machine (other ports / connections) as well as from any other computer connected to the same network. Additionally, it appears to be HTTP, not simple a port issue as HTTP over port 8443 (Tortoise SVN if you must know - running over HTTP not over SVN) also fails. I am using Windows Vista SP2 (build 6002). It seems to "creep up" in that after running the computer for a few hours it will fail. (No found way to systematically reproduce the problem.) Additionally, it seems to be more prone on days where the internet connection is flaky already (not sure why the internet is flaky, just is, lot's of failed browsing requests and have to retry/reload often). What I have tried (when the problem arises) - none have yielded any resolution: Resetting the network connection (dis-connect, re-connect) Disable/re-enable the network adapter Double-checked the ip settings Double-checked the HOSTS file. Note: DNS continues to work (both new and cached responses to DNS queries). (Thanks for the suggestion Daniel and antenore.) Checked the routing tables (ip4 only as ipv6 is beyond my understanding) resetting all involved hardware (routers and modems) Close and reopen browsers Looked for malware interference: Run HijackThis Looked for suspicious processes using SysInternals procexp. Looked for explorer hijacks, lsa provider interference, winsock provider interference using SysInternals Autoruns. Run a complete anti-virus scan. Reviewed the output of a netstat -onab to see if there were stuck ports open or unusual processes running somewhere The only thing that works is to do a full reboot. That works 100% of the time to restore browsing. What else can I try to nail down the problem?

  Read the article

• DELL DRAC & Ubuntu VPN Connection

  - by Mikunos

  I am trying to connect to a DELL DRAC card without success by Ubuntu VPN Connection Manager. I have these data: Protocol: PPTP SERVER IP PPTP: 1233.123.123.123 DRAC IP: 192.168.10.25 Subnet: 255.255.0.0 User: myuser Pass: mypass where have I to write these parameters? I have configured the PPTP connection using the graphical tool in Ubuntu 11.10 ... but in the /var/log/syslog I get these messages: Apr 15 11:33:15 shinet NetworkManager[1035]: <info> Starting VPN service 'pptp'... Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 18180 Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN service 'pptp' appeared; activating connections Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN plugin state changed: 3 Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN connection 'Connessione VPN 1' (Connect) reply received. Apr 15 11:33:15 shinet pppd[18182]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. Apr 15 11:33:15 shinet pppd[18182]: pppd 2.4.5 started by root, uid 0 Apr 15 11:33:15 shinet pppd[18182]: Using interface ppp0 Apr 15 11:33:15 shinet pppd[18182]: Connect: ppp0 <--> /dev/pts/1 Apr 15 11:33:15 shinet NetworkManager[1035]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Apr 15 11:33:15 shinet NetworkManager[1035]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. Apr 15 11:33:15 shinet pptp[18185]: nm-pptp-service-18180 log[main:pptp.c:314]: The synchronous pptp option is NOT activated Apr 15 11:33:46 shinet pppd[18182]: LCP: timeout sending Config-Requests Apr 15 11:33:46 shinet pppd[18182]: Connection terminated. Apr 15 11:33:46 shinet avahi-daemon[1081]: Withdrawing workstation service for ppp0. Apr 15 11:33:46 shinet NetworkManager[1035]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Apr 15 11:33:46 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:46 shinet pppd[18182]: Modem hangup Apr 15 11:33:46 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:51 shinet pppd[18182]: Exit. Apr 15 11:33:51 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:51 shinet NetworkManager[1035]: <info> VPN plugin state changed: 6 Apr 15 11:33:51 shinet NetworkManager[1035]: <info> VPN plugin state change reason: 0 Apr 15 11:33:51 shinet NetworkManager[1035]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active. Apr 15 11:33:51 shinet NetworkManager[1035]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS. Apr 15 11:33:57 shinet NetworkManager[1035]: <info> VPN service 'pptp' disappeared Thanks

  Read the article

• Basic OpenVPN setup not working

  - by WalterJ89

  I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You EDIT it seems on the server the openvpn-status.log has the routes for the client SERVER OpenVPN CLIENT LIST Updated,Wed May 19 18:26:32 2010 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since client,192.168.10.102:50517,19157,20208,Wed May 19 17:38:25 2010 ROUTING TABLE Virtual Address,Common Name,Real Address,Last Ref 10.8.0.6,client,192.168.10.102:50517,Wed May 19 17:38:56 2010 GLOBAL STATS Max bcast/mcast queue length,0 END Also this is from the client.log file: Which seems to be correct C:\WINDOWS\system32\route.exe ADD 10.8.0.0 MASK 255.255.255.0 10.8.0.5 Another EDIT 'route print' on the server shows the route: Destination Mask Gateway Interface 10.8.0.0 255.255.255.0 10.8.0.2 10.8.0.1 the same on the client shows 10.8.0.0 255.255.255.0 10.8.0.5 10.8.0.6 So the routes are there.. what can the problem be? Is there anything wrong with my configs? Why would OpenVPN be having problems communicating?

  Read the article

• Building an SSL server farm

  - by dan

  I'm interested in building the the architecture in the article referenced below. I currently have a modestly-priced layer-4 load balancer and my application servers are the SSL endpoints. I want to put an SSL server farm in between my load balancer and my app servers. Then I will put another inexpensive load balancer between the SSL farm and my app servers, to do layer-7 routing. My web application has a fairly high amount of consumer traffic, that 6 servers can handle at about 50% capacity. Additionally, I have infrastructure traffic that is several orders of magnitude heavier than my consumer traffic. This is data coming in from all over the world that must integrate with my web application in real time. In total I have 18 app servers to handle all the traffic, plus 6 database servers. I will be adding 6 more app servers over the next 2 weeks and another 6 the 2 weeks after that. Conservatively, I estimate I will need to scale to 120 servers by the end of the year. My motivation right now is to separate the consumer traffic from the infrastructure traffic. The consumer traffic is higher priority than the infrastructure traffic and I cannot allow a stampede on the infrastructure side to take down my consumer-facing servers. Having a website that is always up is the top priority. However if there is a failure in one of the consumer app servers, I want to route that traffic to the servers designated for infrastructure traffic. The complication is that all the traffic is addressed using the same hostname and is nearly 100% https. The only way in my case to distinguish infrastructure from consumer traffic is by URL (poor architecture I inherited), so I need a layer 7 load balancer to be able to route. However for that to work I need either a fancy hardware-based SSL terminator or an SSL server farm as described above. Because my user base is rapidly scaling, I worry that if I go down the hardware path it will become very expensive very fast, especially since I will need 4 of everything for high availability (2 identical setups in 2 facilities). Meanwhile, the above diagram seems very flexible and more horizontally scalable. Has anyone built this before? Are there pre-built configurations? What considerations should I make and what software should I use (I've heard of people using apache with mod-ssl, nginx, and stunnel)? Also, when does it make sense to buy an expensive load balancer vs building an SSL server farm? http://1wt.eu/articles/2006_lb/index_05.html

  Read the article

• VirtualBox - multiple guests, each with a single bridged adapter?

  - by Martin

  I am running a dedicated server (located at Hetzner, Germany) that runs VirtualBox in order to virtualize several services accross multiple virtual guests. Those guests are supposed to communicate with each other (for instance, a virtual web server has to access a virtual database server); to be reachable from the dedicated server (for instance, SSH access); and to access the Internet via the dedicated server (for instance, to download security updates) Currently, this is achieved by having host-only adapter vboxnet0 on the dedicated server and two virtual interfaces on each guest. There, virtual adapter eth0 is attached to vboxnet0 (to achieve (1) and (2)), virtual adapter eth1 is attached to VirtualBox' NAT (to achieve (3)). Via eth0, the guests have access to a DHCP and a DNS server, both running on the dedicated server (there, bound to vboxnet0). This allows me to assign custom IP addresses and names. Via eth1, VirtualBox pushes a proper route that enables each guest to access the Internet (via eth0 on the dedicated server). This setup with two virtual adapters frequently leads to problems and at leasts complicates many things. For instance, on the dedicated server there is OpenVPN which allows to access the virtual machines via the Internet; futhermore, there is Shorwall that controls the incoming and outgoing network traffic between the Internet, the dedicated server, and the individual virtual machines. Not to mention automatic installation of servers via PXE... Therefore, I would prefer to have only one single virtual adapter on each guest which would be used for both incoming and outgoing connections. As far as I understand, one would basically use a bridged interface for that very purpose. Now the question arises: Which interface on the dedicated server would the bridge use? eth0 on the host server is not an option, as this is prohibited by the provider. A virtual interface eth0:0 would not make any sense, as a bridge always uses a physical interface (eth0 in this case). Would it be possible to create a bridged interface in each virtual machine that would "dangle in the air"? Thus, without a complement on the dedicated server? How would I have to set up the routing on the host server? Please note that the host / dedicated server has only one network adapter (eth0) which is connected to the provider's network. Regards, Martin

  Read the article

• FTP not listing files behind firewall (setsockopt (ignored): Permission denied)

  - by KennyDs

  We are developing a Magento application that has a module that works with FTP. Today we deployed this on the testing environment which is setup in the following way: Gateway server which has the following iptables rules: # iptables -L -n -v Chain INPUT (policy ACCEPT 2 packets, 130 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 165 13720 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED Chain FORWARD (policy ACCEPT 7 packets, 606 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- eth1 eth0 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 15 965 ACCEPT all -- eth0 eth1 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- eth1 eth1 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT 126 packets, 31690 bytes) pkts bytes target prot opt in out source destination These are set at runtime via the following bash script: #!/bin/sh PATH=/usr/sbin:/sbin:/bin:/usr/bin # # delete all existing rules. # iptables -F iptables -t nat -F iptables -t mangle -F iptables -X # Always accept loopback traffic iptables -A INPUT -i lo -j ACCEPT # Allow established connections, and those not coming from the outside iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth1 -o eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow outgoing connections from the LAN side. iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT # Masquerade. iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE # Don't forward from the outside to the inside. iptables -A FORWARD -i eth1 -o eth1 -j REJECT # Enable routing. echo 1 > /proc/sys/net/ipv4/ip_forward The gateway server is connected to the WAN via eth1 and is connected to the internal network via eth0. One of the servers from eth1 has the following problem when trying to list files over ftp: $ ftp -vd myftpserver.com Connected to myftpserver.com 220 Welcome to MY FTP Server ftp: setsockopt: Bad file descriptor Name (myftpserver.com:magento): XXXXXXXX ---> USER XXXXXXXX 331 User XXXXXXXX, password please Password: ---> PASS XXXX 230 Password Ok, User logged in ---> SYST 215 UNIX Type: L8 Remote system type is UNIX. Using binary mode to transfer files. ftp> ls ftp: setsockopt (ignored): Permission denied ---> PORT 192,168,19,15,135,75 421 Service not available, remote server has closed connection When I try listing the files in passive mode, same result. When I run the same command on the gateway server, everything works fine so I believe that the issue is happening because of the iptables rules not forwarding properly. Does anyone have an idea which rule I need to add to make this work?

  Read the article

• I have made two template classes,could any one tell me if these things are useful?

  - by soul

  Recently i made two template classes,according to the book "Modern C++ design". I think these classes are useful but no one in my company agree with me,so could any one tell me if these things are useful? The first one is a parameter wrapper,it can package function paramters to a single dynamic object.It looks like TypeList in "Modern C++ design". You can use it like this: some place of your code: int i = 7; bool b = true; double d = 3.3; CParam *p1 = CreateParam(b,i); CParam *p2 = CreateParam(i,b,d); other place of your code: int i = 0; bool b = false; double d = 0.0; GetParam(p1,b,i); GetParam(p2,i,b,d); The second one is a generic callback wrapper,it has some special point compare to other wrappers: 1.This template class has a dynamic base class,which let you use a single type object represent all wrapper objects. 2.It can wrap the callback together with it's parameters,you can excute the callback sometimes later with the parameters. You can use it like this: somewhere of your code: void Test1(int i) { } void Test2(bool b,int i) { } CallbackFunc * p1 = CreateCallback(Test1,3); CallbackFunc * p2 = CreateCallback(Test2,false,99); otherwhere of your code: p1->Excute(); p2->Excute(); Here is a part of the codes: parameter wrapper: class NullType; struct CParam { virtual ~CParam(){} }; template<class T1,class T2> struct CParam2 : public CParam { CParam2(T1 &t1,T2 &t2):v1(t1),v2(t2){} CParam2(){} T1 v1; T2 v2; }; template<class T1> struct CParam2<T1,NullType> : public CParam { CParam2(T1 &t1):v1(t1){} CParam2(){} T1 v1; }; template<class T1> CParam * CreateParam(T1 t1) { return (new CParam2<T1,NullType>(t1)); } template<class T1,class T2> CParam * CreateParam(T1 t1,T2 t2) { return (new CParam2<T1,T2>(t1,t2)); } template<class T1,class T2,class T3> CParam * CreateParam(T1 t1,T2 t2,T3 t3) { CParam2<T2,T3> t(t2,t3); return new CParam2<T1,CParam2<T2,T3> >(t1,t); } template<class T1> void GetParam(CParam *p,T1 &t1) { PARAM1(T1)* p2 = dynamic_cast<CParam2<T1,NullType>*>(p); t1 = p2->v1; } callback wrapper: #define PARAM1(T1) CParam2<T1,NullType> #define PARAM2(T1,T2) CParam2<T1,T2> #define PARAM3(T1,T2,T3) CParam2<T1,CParam2<T2,T3> > class CallbackFunc { public: virtual ~CallbackFunc(){} virtual void Excute(void){} }; template<class T> class CallbackFunc2 : public CallbackFunc { public: CallbackFunc2():m_b(false){} CallbackFunc2(T &t):m_t(t),m_b(true){} T m_t; bool m_b; }; template<class M,class T> class StaticCallbackFunc : public CallbackFunc2<T> { public: StaticCallbackFunc(M m):m_m(m){} StaticCallbackFunc(M m,T t):CallbackFunc2<T>(t),m_m(m){} virtual void Excute(void){assert(CallbackFunc2<T>::m_b);CallMethod(CallbackFunc2<T>::m_t);} private: template<class T1> void CallMethod(PARAM1(T1) &t){m_m(t.v1);} template<class T1,class T2> void CallMethod(PARAM2(T1,T2) &t){m_m(t.v1,t.v2);} template<class T1,class T2,class T3> void CallMethod(PARAM3(T1,T2,T3) &t){m_m(t.v1,t.v2.v1,t.v2.v2);} private: M m_m; }; template<class M> class StaticCallbackFunc<M,void> : public CallbackFunc { public: StaticCallbackFunc(M method):m_m(method){} virtual void Excute(void){m_m();} private: M m_m; }; template<class C,class M,class T> class MemberCallbackFunc : public CallbackFunc2<T> { public: MemberCallbackFunc(C *pC,M m):m_pC(pC),m_m(m){} MemberCallbackFunc(C *pC,M m,T t):CallbackFunc2<T>(t),m_pC(pC),m_m(m){} virtual void Excute(void){assert(CallbackFunc2<T>::m_b);CallMethod(CallbackFunc2<T>::m_t);} template<class T1> void CallMethod(PARAM1(T1) &t){(m_pC->*m_m)(t.v1);} template<class T1,class T2> void CallMethod(PARAM2(T1,T2) &t){(m_pC->*m_m)(t.v1,t.v2);} template<class T1,class T2,class T3> void CallMethod(PARAM3(T1,T2,T3) &t){(m_pC->*m_m)(t.v1,t.v2.v1,t.v2.v2);} private: C *m_pC; M m_m; }; template<class T1> CallbackFunc *CreateCallback(CallbackFunc *p,T1 t1) { CParam2<T1,NullType> t(t1); return new StaticCallbackFunc<CallbackFunc *,CParam2<T1,NullType> >(p,t); } template<class C,class T1> CallbackFunc *CreateCallback(C *pC,void(C::*pF)(T1),T1 t1) { CParam2<T1,NullType>t(t1); return new MemberCallbackFunc<C,void(C::*)(T1),CParam2<T1,NullType> >(pC,pF,t); } template<class T1> CParam2<T1,NullType> CreateCallbackParam(T1 t1) { return CParam2<T1,NullType>(t1); } template<class T1> void ExcuteCallback(CallbackFunc *p,T1 t1) { CallbackFunc2<CParam2<T1,NullType> > *p2 = dynamic_cast<CallbackFunc2<CParam2<T1,NullType> > *>(p); p2->m_t.v1 = t1; p2->m_b = true; p->Excute(); }

  Read the article

• OpenVPN multiple servers on the same subnet, high availability

  - by andre

  Hey everyone. Let me start by saying that my Linux experience isn't super awesome but I can usually find my way around things easily. Over at work we have an OpenVPN setup that's been due for some improvement for a while now. The main server (tap mode) runs in our office, behind a rather slow DSL connection. The main problem is that, since I'm usually out of the office, every time I want to access something on the virtual network I have to go through that server to get anywhere else. We have two servers up on 100 Mbit connections that we use for development and production purposes, about 3 more servers in the office (one of them behind a different T1 line for VOIP) and about two dozen clients who use the network on a daily basis from various locations. We've had situations where network routing (outside of our control) would not allow people to reach our main OpenVPN server whilst the other locations were connectable. Also any time someone outside the office wants to fetch something from any of the servers (say, a 500 MB code repository), a whopping 20 KB/s download speed is just unacceptable these days (did I mention slow DSL? ok). We had to implement traffic shaping on this server since maxing out this connection was fairly trivial. I had the thought of running two (or more) OpenVPN servers in the network. These would have to have the same subnet though, as our application relies on virtual network's IP addresses for some of its core functionality. The clients would also preferably retain the same IP addresses but that's not vital. For simplicity, lets call the current server office and the second server I'm setting up, cloud. Call the server on the T1 phone. This proved to be rather complex because as soon as I connect to cloud, I cannot see office. Any routes to a server that would go through office also do not work while I'm connected to cloud (no ping, nothing) and vice-versa. There's no rules for iptables that would be blocking the traffic either. Recently I came across this article on linuxjournal but the solution they provide seems to only cover the use of two servers and somewhat outdated (can't even find much documentation, their wiki is offline). They also state that adding more servers would be a complex task. Ideally I would like to keep the existing server office running the virtual network and also run the OpenVPN daemon on the cloud and phone servers (100 Mbit and very reliable connection, respectively) so that we're on safe ground in case of a hardware failure, DSL failure, etc. So, in essence, I'm looking for a highly available OpenVPN solution (fix, patch, hack, tweak, whatever you want to call it) that will accept connections on multiple hosts (2 or more) whilst keeping the same IP address subnet regardless of the server to which you connect to. Thanks for reading and sorry for the long post, I hope it gets the point across :P

  Read the article

• What the best way to achieve RPO of zero and lowest possible RTO (less than 15 minutes) with SQL 2008 R2?

  - by Adrian Hope-Bailie

  We are running a payments (EFT transaction processing) application which is processing high volumes of transactions 24/7 and are currently investigating a better way of doing DB replication to our disaster recovery site. Our current and previous strategies have included using both DoubleTake and Redgate to replicate data to a warm stand-by. DoubleTake is the supported solution from the payments software vendor however their (DoubleTake's) support in South Africa is very poor. We had a few issues and simply couldn't ever resolve them so we had to give up on DoubleTake. We have been using Redgate to manually read the data from the primary site (via queries) and write to the DR site but this is: A bad solution Getting the software vendor hot and bothered whenever we have support issues as it has a tendency to interfere with the payment application which is very DB intensive. We recently upgraded the whole system to run on SQL 2008 R2 Enterprise which means we should probably be looking at using some of the built-in replication features. The server has 2 fairly large databases with a mixture of tables containing highly volatile transactional data and pretty static configuration data. Replication would be done over a WAN link to a separate physical site and needs to achieve the following objectives. RPO: Zero loss - This is transactional data with financial impact so we can't lose anything. RTO: Tending to zero - The business depends on our ability to process transactions every minute we are down we are losing money I have looked at a few of the other questions/answers but none meet our case exactly: SQL Server 2008 failover strategy - Log shipping or replication? How to achieve the following RTO & RPO with logshipping only using SQL Server? What is the best of two approaches to achieve DB Replication? My current thinking is that we should use mirroring but I am concerned that for RPO:0 we will need to do delayed commits and this could impact the performance of the primary DB which is not an option. Our current DR process is to: Stop incoming traffic to the primary site and allow all in-flight transaction to complete. Allow the replication to DR to complete. Change network routing to route to DR site. Start all applications and services on the secondary site (Ideally we can change this to a warmer stand-by whereby the applications are already running but not processing any transactions). In other words the DR database needs to, as quickly as possible, catch up with primary and be ready for processing as the new primary. We would then need to be able to reverse this when we are ready to switch back. Is there a better option than mirroring (should we be doing log-shipping too) and can anyone suggest other considerations that we should keep in mind?

  Read the article

• Windows Server 2008 - one MAC Address, assign multiple external IP's to VirtualBoxes running as guests on host

  - by Sise

  Couldn't find any help @ google or here. The scenario: Windows Server 2008 Std x64 on i7-975, 12 GB RAM. The server is running in a data centre. One hardware NIC - RealTek PCIe GBE - one MAC Address. The data centre provides us 4 static external IP's. The first is assigned to the host by default of course. I have ordered all 4 IP's, the data centre can assign the available IP's to the physical MAC address of the given NIC only. This means one NIC, one MAC Address, 4 IP's. Everything works fine so far. Now, what I would like to have: Installed VirtualBox with 1-3 guests running, each gets it's own external IP assigned. Each of it should be an standalone Win Server 2008. It looks like the easiest way would be to put the guests into an virtual subnet and routing all data coming to the 2nd till 4th external IP through to this guests using there subnet IP's. I have been through the VirtualBox User Manuel regarding networking. What's not working: I can't use bridged networking without anything else, because the IP's are assigned to the one MAC address only. I can't use NAT networking because it does not allow access from outside or the host to the guest. I do not wanna use port forwarding. Host-only networking itself would not allow internet access, by sharing the default internet connection of the host, internet is granted from the guest to the outside but not from outside or the host to the guest. InternalNetworking is not really an option here. What I have tried is to create an additional MS Loopback adapter for a routed subnet, where the Vbox guests are in, now the idea was to NAT the internet connection to the loopback 'subnet'. But I can't ping the gateway from the guests. By using route command in the command shell or RRAS (static route, NAT) I didn't get there as well. Solutions like the following do work for the one way, but not for the way back: For your situation, it might be best to use the Host-Only adapter for ICS. Go to the preferences of VB itself and select network. There you can change the configuration for the interface. Set the IP address to 192.168.0.1, netmask 255.255.255.0. Disable the DHCP server if it isn't already and that's it. Now the Guest should get an IP from Windows itself and be able to get onto the internet, while you can also access the Host. Slowly I'm pretty stucked with this topic. There is a possibility I've just overlooked something or just didn't getting it by trying, especially using RRAS, but it's kinda hard to find useful howto's or something in the web. Thanks in advance! Best regards, Simon

  Read the article

• Access Violation When Accessing an STL Object Through A Pointer or Reference In A Different DLL or E

  - by Yan Cheng CHEOK

  I experience the following problem while using legacy VC6. I just cann't switch to modern compiler, as I am working on a legacy code base. http://support.microsoft.com/kb/172396 Since there are no way to export map, my planned workaround is using static linking instead of dynamic linking. I was wondering whether you all had encountered the similar situation? What is your workaround for this? Another workaround is to create wrapper class around the stl map, to ensure creation and accessing stl map, are within the same DLL space. Note that, fun0, which uses wrapper class will just work fine. fun1 will crash. Here is the code example : // main.cpp. Compiled it as exe. #pragma warning (disable : 4786) #include <map> #include <string> template <class K, class V> class __declspec(dllimport) map_wrapper { public: map_wrapper(); ~map_wrapper(); map_wrapper(const map_wrapper&); map_wrapper& operator=(const map_wrapper&); V& operator[](const K&); const V& operator[](const K&) const; const V& get(const K&) const; void put(const K&, const V&); int size() const; private: std::map<K, V> *m; }; __declspec(dllimport) void fun0(map_wrapper<std::string, int>& m); __declspec(dllimport) void fun1(std::map<std::string, int>& m); int main () { map_wrapper<std::string, int> m0; std::map<std::string, int> m1; m0["hello"] = 888; m1["hello"] = 888; // Safe. The we create std::map and access map both in dll space. fun0(m0); // Crash! The we create std::map in exe space, and access map in dll space. fun1(m1); return 0; } // dll.cpp. Compiled it as dynamic dll. #pragma warning (disable : 4786) #include <map> #include <string> #include <iostream> /* In map_wrapper.h */ template <class K, class V> class __declspec(dllexport) map_wrapper { public: map_wrapper(); ~map_wrapper(); map_wrapper(const map_wrapper&); map_wrapper& operator=(const map_wrapper&); V& operator[](const K&); const V& operator[](const K&) const; const V& get(const K&) const; void put(const K&, const V&); int size() const; private: std::map<K, V> *m; }; /* End */ /* In map_wrapper.cpp */ template <class K, class V> map_wrapper<K, V>::map_wrapper() : m(new std::map<K, V>()) { } template <class K, class V> map_wrapper<K, V>::~map_wrapper() { delete m; } template <class K, class V> map_wrapper<K, V>::map_wrapper(const map_wrapper<K, V>& map) : m(new std::map<K, V>(*(map.m))) { } template <class K, class V> map_wrapper<K, V>& map_wrapper<K, V>::operator=(const map_wrapper<K, V>& map) { std::map<K, V>* tmp = this->m; this->m = new std::map<K, V>(*(map.m)); delete tmp; return *this; } template <class K, class V> V& map_wrapper<K, V>::operator[](const K& key) { return (*this->m)[key]; } template <class K, class V> const V& map_wrapper<K, V>::operator[](const K& key) const { return (*this->m)[key]; } template <class K, class V> const V& map_wrapper<K, V>::get(const K& key) const { return (*this->m)[key]; } template <class K, class V> void map_wrapper<K, V>::put(const K& key, const V& value) { (*this->m)[key] = value; } template <class K, class V> int map_wrapper<K, V>::size() const { return this->m->size(); } // See : http://www.parashift.com/c++-faq-lite/templates.html#faq-35.15 // [35.15] How can I avoid linker errors with my template classes? template class __declspec(dllexport) map_wrapper<std::string, int>; /* End */ __declspec(dllexport) void fun0(map_wrapper<std::string, int>& m) { std::cout << m["hello"] << std::endl; } __declspec(dllexport) void fun1(std::map<std::string, int>& m) { std::cout << m["hello"] << std::endl; }

  Read the article

• Gentoo box can't cURL or ping after restarting net.eth1

  - by Curlybraces

  Hi all, the following is completely baffling me. We currently have a gentoo box which acts as our LAMP, DNS, DHCP server. This is assigned a static IP on the network. This server is connected directly to the internet via a BT BusinessHub Router. The server is also connected to a patch panel/switch port which connects the remaining office (around 10 PC's) to the server. Everything has been plain sailing until the other day when the server was restarted. For some reason now only portions of network accessibility is available depending on which ethernet device was last restarted. Restarting net.eth0 allows the office server to cURL, ping, etc but stops all networked PC's from accessing the internet. Then restarting net.eth1 restores all internet to the network but stops the server from curling, pinging, etc again. However, even when the server can't ping, curl, etc, I can still remote SSH and remote MySQL connect from the server command line to other external servers that we own. Here's my route map (router is 192.168.1.254): Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo 0.0.0.0 192.168.1.254 0.0.0.0 UG 0 0 0 eth1 Here's my /etc/conf.d/net: iface_eth0="192.168.1.99 broadcast 192.168.1.255 netmask 255.255.255.0" iface_eth1="dhcp" None of the above have ever been changed however. Things have just ceased to operate correctly, which makes me think it's a freshly added Iptables rule. Here's the Iptables Filter table: Chain INPUT (policy ACCEPT) target prot opt source destination DROP tcp -- ##.##.##.## anywhere tcp dpt:ssh ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere tcp dpt:2199 ACCEPT tcp -- anywhere anywhere tcp dpt:3199 ACCEPT tcp -- ##.###.###.## anywhere tcp dpt:http ACCEPT tcp -- ###.###.##.## anywhere tcp dpt:2199 ACCEPT tcp -- ##.###.###.### anywhere tcp dpt:http ACCEPT tcp -- ##.###.##.## anywhere tcp dpt:http ACCEPT tcp -- ##.###.###.### anywhere tcp dpt:3128 ACCEPT udp -- ##.###.###.### anywhere udp dpt:3128 ACCEPT tcp -- ##.###.###.### anywhere tcp dpt:http ACCEPT tcp -- ##.###.###.### anywhere tcp dpt:https Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere ##.###.###.## DROP all -- anywhere ##.###.###.## ACCEPT all -- anywhere anywhere state NEW,ESTABLISHED Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhere udp spt:2199 ACCEPT udp -- anywhere anywhere udp spt:4817 ACCEPT udp -- anywhere anywhere udp spt:4819 ACCEPT udp -- anywhere anywhere udp spt:3199 Help gratefully appreciated.

  Read the article

< Previous Page | 297 298 299 300 301 302 303 304 305 306 307 308  | Next Page >