Search Results

Search found 12338 results on 494 pages for 'compilation tool'.

Page 302/494 | < Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >

• Windows XP Installation issue - cannot find hard disk

  - by Marco

  A friend of mine gave me a laptop with Windows 8 installed and nothing else. I don't like it so I am trying to remove it by installing Windows XP. I have a windows XP installation CD that I have used before and worked fine, but didn't work when I tried to install it on the Windows 8 machine. It keeps telling me I don't have a drive to install to. Then I log into Windows 8 again and install check partitions. I found 2 and tried to make a new one but it will only let me make one of 69mb. Next, I tied to find a way to go back to XP with BCD install and try to set the boot loader for XP but it wasnt there. Somehow I deleted the bootloader for Windows 8 and now it asks me for a recovery tool for media. I am not familiar with the laptop specs, but it is a Toshiba with about 250GB storage, and above 1GHz processor.

  Read the article

• Create a Windows Image for Deployment

  - by Kiranu

  In my company we have 8 laptops that we use to deploy on the field. These machines get assigned to a user for a certain time and run Windows Vista. All the machines are the same model. After the machine is returned, it is company policy to completely format the machine and go back to a predetermined configuration. Right now, what we do is we use the recovery utility in the laptop (we are a small shop so we use the OEM Windows license that the laptops come with) and manually uninstall and change the configuration in order to bring it to our baseline config. I know that there are ways to create an image that gets copied to the hard drive with a specific configuration and with specific software installed (thats what OEMs do right?). I'm looking for a tool or a tutorial or something that explains as simply as possible how to create such an image. Thanks a lot

  Read the article

• Search files for text matching format of a Unix directory

  - by BrandonKowalski

  I am attempting to search through all the files in a directory for text matching the pattern of any arbitrary directory. The output of this I hope to use to make a list of all directories referenced in the files (this part I think I can figure out on my own). I have looked at various regex resources and made my own expression that seems to work in the browser based tool but not with grep in the command line. /\w+[(/\w+)]+ My understanding so far is the above expression will look for the beginning / of a directory then look for an indeterminate number of characters before looking for a repeating block of the same thing. Any guidance would be greatly appreciated.

  Read the article

• Trying To Uninstall Exchange 2007 From Server - Stuck On "Mailbox Role Checks"

  - by Matthew Hodgkins

  Hi All, I am trying to uninstall Exchange 2007 on a secodary server which has been decommissioned for quite a while (cleaning up after an old Network Admin). The only roll the server had was "Mailbox Role" (the primary server also has this). I have tried uninstalling using Programs and Features GUI tool but that hung on Mailbox Role Checks. I then tried uninstalling Exchange by running Setup.com /mode:uninstall. It has been stuck on 1% of "Mailbox Role Checks" for over 3 hours now. Is there any other options I have for uninstalling Exchange 2007 so the old server can be removed from the Exchange Management console?

  Read the article

• Web browser being selective about the sites that it will visit.

  - by Andrew Doran

  I've been trying to help my father-in-law with this problem but haven't been able to get anywhere. Since the weekend the web browsers on his computer (Chrome and Internet Explorer on Windows XP) will only let him get to certain sites - for example, he is able to conduct his online banking but he cannot visit www.bbc.co.uk, www.amazon.co.uk or www.ancestry.com. There is another computer in the house that goes via the same router and this can connect to both, which suggests it is his machine. I tried running a tracert to www.bbc.co.uk and managed to get through, but the web browser hangs with a message that it is waiting for a response. I tried using the WinSockFix tool in case it was anything to do with a recent registry change but that didn't work either. He can't think of anything that he recently did on his machine to cause the problem. Can anyone help?

  Read the article

• Cannot install passenger with Nginx

  - by Luc

  Hello, I have a rack application that I want to migrate from Ruby 1.8.7 + Apache + passenger to Ruby 1.9.1 + Nginx + passenger. I have made up the following script for a quick install all in one, and it raises an error... Here is the installation script: (basic one with all the steps I need to install everything on a Ubuntu 10.04 Lucid Lynx fresh box) Nginx sources cd /tmp wget http://nginx.org/download/nginx-0.7.66.tar.gz tar xzf nginx-0.7.66.tar.gz cd nginx-0.7.66 openssl required for SSL/TLS sudo apt-get install openssl sudo apt-get install libssl-dev Compilation stuff sudo apt-get zlib1g-dev Ruby interpreter 1.9.1 sudo apt-get install ruby1.9.1 ruby1.9.1-dev rubygems1.9.1 irb1.9.1 ri1.9.1 rdoc1.9.1 build-essential nginx libopenssl-ruby1.9.1 Make sure default ruby uses version 1.9.1 sudo update-alternatives --install /usr/bin/ruby ruby /usr/bin/ruby1.9.1 400 --slave /usr/share/man/man1/ruby.1.gz ruby.1.gz /usr/share/man/man1/ruby1.9.1.1.gz --slave /usr/bin/ri ri /usr/bin/ri1.9.1 --slave /usr/bin/irb irb /usr/bin/irb1.9.1 --slave /usr/bin/rdoc rdoc /usr/bin/rdoc1.9.1 sudo update-alternatives --config ruby Passenger (rake-0.8.7, fastthread-1.0.7, rack-1.1.0, passenger-2.2.14) sudo gem install passenger Activate Passenger in nginx, select option 2 to use nginx sources donwloaded above cd /var/lib/gems/1.9.1/gems/passenger-2.2.14/bin sudo ./passenger-install-nginx-module And this is the error message I got: /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/ContentHandler.c gcc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Wunused-function -Wunused-variable -Wunused-value -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I /tmp/pcre-8.00 -I objs -I src/http -I src/http/modules -I src/mail \ -o objs/addon/nginx/StaticContentHandler.o \ /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/StaticContentHandler.c /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/StaticContentHandler.c: In function ‘passenger_static_content_handler’: /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/StaticContentHandler.c:71: error: ‘ngx_http_request_t’ has no member named ‘zero_in_uri’ make[1]: *** [objs/addon/nginx/StaticContentHandler.o] Error 1 make[1]: Leaving directory `/tmp/nginx-0.7.66' make: *** [build] Error 2 -------------------------------------------- It looks like something went wrong Please read our Users guide for troubleshooting tips: /var/lib/gems/1.9.1/gems/passenger-2.2.14/doc/Users guide Nginx.html I do not understand the reason of this error. Is this a compatibility problem ? Hope you have any clues :) Thanks a lot, Luc

  Read the article

• How do I make a VMDK format virtual hard drive from a physical partition on a disk?

  - by Ahmad

  I have a 320 GB HDD, which actually only has an 80 GB NTFS format partition which was being used by a Windows 7 system ... I want to create a VMDK format clone of this partition, so that I can use it with VMware .. However, tradition VMDK creation programs normally make a VMDK for an entire disk, whereas I just want to make a VMDK for the one 80 GB partition ... This is important because the other 240 GB on the physical source HDD is just unallocated area, and including that in a VMDK file is just a plain waste of space .. So how to make a VMDK file for a specific partition ? Any tool available for this ?

  Read the article

• Can't save DB password in BDE Admin v5.01 (c. 1998)

  - by Ryan Armstrong

  I have a legacy version of Goldmine running which uses BDE to connect to an SQL2005 server. I'm moving the goldmine application and its database onto a new server and all is fine with the exception of the master DB password. When Goldmine starts it prompts for the password. I enter the password and all is fine but I want the prompt to go away. The password appears to be saved and obfuscated somewhere on the old server but this was configured before my time. As best I can determine, I use the bdeadmin.exe tool to modify the idapi32.cfg file but there is no password option.

  Read the article

• What cloud backup solution supports a "backup server to cloud" configuration?

  - by Gepeto

  What online backup tool allows you to: A) Back up Windows, Linux and optionally Mac desktops and servers to the cloud B) Do so by first backing up to a central server or appliance C) Allow restoring from that appliance when possible and if not go to the cloud For now the best option I have seen is i365 by seagate with an appliance between the local computers and the cloud. I know Microsoft also has an i365 plugin for DPM, as well as an Iron Mountain plugin. However, I feel that there must be a simpler way to do this. Can any of the "simpler" solutions like Jungle Disk or anything else going to s3, Mozy, Carbonite, Crashplan, etc do this? Thank you

  Read the article

• MySQL blocking new connections, and mysqladmin flush-hosts

  - by aidan

  I'm running MySQL on a remote server, and it suddenly started rejecting all connections: $ mysql -h 192.168.1.10 -u root -p ERROR 1129 (00000): Host 'web' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts' So, I try this flush-hosts command... $ mysqladmin flush-hosts -h 192.168.1.10 -u root -p mysqladmin: connect to server at '192.168.1.10' failed error: 'Host 'web' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'' I.e. it's blocking the very un-blocking tool it recommends. Am I doing it wrong, or will I have to resort to ssh/cpanel/physical access?

  Read the article

• "Unsupported compression method 98" error when unzipping a file. What tools support it, other than W

  - by Chris W. Rea

  I'm getting an error message: "unsupported compression method 98" when unzipping a file somebody sent to me. I've tried both an older version of WinZip, and 7-Zip 4.65. I've already asked the person to avoid using a non-standard compression method and re-send the file. I know WinZip (of which they are using a newer version) has compatibility options. But, I'm wondering: What archiving utilities, other than WinZip, support this "compression method 98"? In particular, is there a free and/or open source tool that supports that method? If not, why not? Is the method strictly proprietary to WinZip?

  Read the article

• Fix bad blocks on Mac hard disk

  - by Andrew Vit

  I have a hard disk that I scanned with TechTool and it reports one bad block. As far as I can tell, TechTool only scans and reports a failure. It doesn't fix anything. Back in the day, Norton Disk Doctor did the job of scanning and flagging (remapping) bad blocks on the Mac. Today we have various tools for fixing up HFS+ directory errors (Disk Utility, fsck, DiskWarrior, TechTool), but I don't know of any tool that will do a surface scan and fix the bad blocks too. What software is available for this? If I know the address of the bad block, is there a low-level terminal utility for marking it?

  Read the article

• Route packets from one VPN to another

  - by Mike

  I have two OpenVPN servers (10.8.0.0 and 10.9.0.0) set up on my OpenSUSE server. Within one network, each computer is visible to any other one, but I'd like to make it so that computers are visible across networks. I'd like to route the packets like this: when a user (say 10.8.0.6) pings an address on the other VPN (10.9.0.6), the packets are routed to the 10.9.0.1 and then to the appropriate computer in this VPN. How do I achieve this using iptables or a different tool? I tried the commands at the end of this section with no avail.

  Read the article

• partition alignment on fresh windows 2003 ent server

  - by Datapimp23

  Hi, I have this server which has it's physical disks in RAID 5 controlled by a 3com raid controller. size of the stripe unit is unknown for the moment (Can check tomorrow in the office). I need to install windows server 2003 ENT and create 2 partitions (OS, Data). I'd like to create the partitions before the installation on windows server. They have to be aligned properly. I have the newest version of gparted on a disc but I have no clue if this is the right tool. Can someone point me in the right direction? Thanks

  Read the article

• Best alternatives to recover lost directories in FAT32 external hard drive?

  - by Sergio

  Hi: I have an 320 GB ADATA CH91 external hard drive. I guess it has some problems with the connector of the USB jack. The point is that in certain occasions it fails in write operations generating data losses. Right now I lost a directory with several GB's of very useful information. Since then I have not attempted to write to the disk any more. What tool would you recommend to recover the lost data? The disk is FAT32 formatted (only one partition) and I use both Linux and Windows. What filesystem format would you recommend to avoid future data losses? I currently only use this external hard drive in Linux so there are several available choices (FAT, NTFS, ext3, ext4, reiser, etc.). Regards, Sergio

  Read the article

• m23 vs webmin vs landscape vs whatever you can propose, I need software to mantain a bunch of debian

  - by marc.riera

  Hello, I know there is landscape from canonical, but it has some $$ costs. Als there is webmin, and it can be used as a cluster management tool. Also there is m23, probably the most usable and interesting peace of manager software. But, what would you suggest to install and use on following configuration: 1) 100 desktop users, against an AD with quest authentication services installed. (ubunt8.04,9.04,9.10,10.04) 2) 50 servers (debian sid, lenny , ubuntu 8.04 and 10.04) We work on different software, so each group of persons need different configurations, each server has different pourposses, nothing is clusterized. And we have a good enough backup software. So , my objectives are: - easy install (deploy) - good reporting - easy logonscripts for users - easy bootupscripts for servers Thanks all for reading, and more thanks for your time. Marc

  Read the article

• How do i have 4GB of video memory with a 1GB video card?

  - by Tomas Spc Yaczik

  I ran the direct X diagnostic tool to take a look at my graphics capabilities and its telling me that the approximate video memory is clocked in at 4096MB. That doesn't make any sense, how is that possible? The only things that i can think of were that DirectX was inaccurate so i looked at the graphics statistics of my computer on CPU-Z which was included with the motherboard and that's telling me i have "negative" 1988MB. Not only is that not 4096MB, but its giving me a negative number and i know for a fact that you can't have a negative amount of memory???!!! The only things i can think of that would be amplifying my video memory output is the PCIe 3.0 bus, or that the motherboard is somehow including the on board video chip set with the video card which only then is only 2GB of video memory, which still has to be being amplified by something. Any suggestions?

  Read the article

• Url rewriting stops working after changing default port on iis7

  - by Somesh

  I have migrated the IIS6 webserver 2003 websites to IIS7 webserver 2008 using msdeploy tool. Application pool setting are changed with "Enable 32-bit Applications=true", "Managed_Pipeline_Mode=Classic","Identity=NetworkService" Framework=v1.1/2.0. All the websites are working fine on default port along with url rewriting migrated from iis6. When I start the webserver on port other than default port by changing bindings, url rewriting stops workings and get 404 error in logs. I think I don't have to change the handler mapping cause I am running it in classic mode. How can I troubleshoot this?

  Read the article

• Why does 1080p through a VGA cable fit my HDTV but is oversized when through an HDMI cable?

  - by GraemeF

  I have put together a new PC with a XFX GeForce GTX 260 graphics card and have it connected to my HDTV. First, I used an old VGA cable with a DVI to VGA adapter and plugged it in to my HDTV's VGA port. Running at 1920x1080 it fit the screen perfectly. Now, to avoid running another cable across the room, I have connected it with a DVI to HDMI cable to my TV's HDMI port, and the desktop at 1920x1080 is cropped by the edge of the screen. I have "fixed" the cropping by using NVIDIA's "Adjust desktop size and position" tool, which created a screen resolution of 1814x1022 to fit the screen, but this is no longer the TV's native resolution and confuses some software (e.g. WoW). Why does VGA work as expected, but HDMI is scaled up? Can it be avoided?

  Read the article

• How do I create a customized keyboard layout for Windows?

  - by Pedro Palhoto

  On Linux you can create any layout you wish by editing the appropriate ASCII configuration files. On Windows the keyboard layout definitions are binary. Is there any tool that can create these binary keyboard layout configuration files? I grew up on the Macintosh international keyboard layout, which used the option key extensively, and now I would like to use the same layout on Windows. On Linux this Mac international keyboard layout exists for both the console as well as for X.Org. On Windows, the most similar layout is US International, which is not the same.

  Read the article

• Can't SSH to remote server,how to avoid this

  - by snow8261

  From time to time,we suffer problems like we can not remote connect to our server via ssh.So we have to send someone on site to restart the computer for this problem.It causes a lot of pain.The situation is we have to remote connect to our server,which are very important like database server and application server and etc.We have met problems like ssh hang,like command ssh [email protected] with no response. when using ssh -v debug mode, it says : debug1: Connection established. debug1: identity file /.ssh/identity type -1 debug1: identity file /.ssh/id_rsa type -1 debug1: identity file /.ssh/id_dsa type -1 debug1: loaded 3 keys and we met this situation many times with no clue how to solve it.Is any log which can identify this problem? or Is there a tool for this problem? help needed!Any idea are appreciated.

  Read the article

• What's the simplest way to serve RhodeCode over HTTPS on windows?

  - by Keith Nicholas

  I have RhodeCode working with http using the paster serve tool that it comes with... I'm struggling to find a "simple" solution to get this running on HTTPS. A lot of discussion is about using Apache to do this on unix. Not a lot of info on how to do it on IIS. I was looking at paster serve and it seems to be able to serve using HTTPS, but can't quite work out how to get this going. However the real goal is just to serve RhodeCode over HTTPS in the simplest way possible ( all self contained would be brilliant).

  Read the article

• GIMP: change the exact color on the image - OK, but transparency disappears

  - by Haradzieniec

  There is no problem for me now to change color for pixels of the same color: I click on "Select by Color Tool"(Ctrl+O). The pixels of the same color are selected now. Then I press Ctrl+,. The selected pixels are white now (the white color is taken from a foreground color). The problem is the transparency. The green color I want to change to the white one has transparency. Once I use my method, the transparency disappears so all my-green-color with any transparency becomes white and without transparency. How do I keep the transparency by using my method? My picture is in .png format.

  Read the article

• Converting encoding of multiple files with iconv (Mac OS)?

  - by Ilya Birman

  I need to convert a whole bunch of files from Windows-1251 to UTF-8. After doing 10 of them by hand in BBEdit, I got bored ;-) I found out that there is an iconv CL tool. I tried this: iconv -f WINDOWS-1251 -t UTF-8 inputfile However it seems that iconv just outputs the converted text instead of writing it to file. Also, there is no outputfile parameter for it. How do I write the changes back to original files? Thanks. Edit: Please note, that inputfile value is actually *.txt, so the solution has to work with that.

  Read the article

• Finding the model of an old computer i used to own?

  - by mcbeav

  This might sounds ridiculous, but I need some help finding the model of an old computer i used to own. I know what the computer looks like. It was made by Packard Bell, but i can't find hardly any information on older packard bell computers anywhere online. I got the computer around 1999, give or take a couple of years. It came with Windows 98 preinstalled. It was a tower desktop. I was wondering if anyone knows of a website or reference tool where i can find some information on older model desktop computers.

  Read the article

< Previous Page | 298 299 300 301 302 303 304 305 306 307 308 309  | Next Page >