Search Results

Search found 7970 results on 319 pages for 'junior dev'.

Page 303/319 | < Previous Page | 299 300 301 302 303 304 305 306 307 308 309 310  | Next Page >

  • WPF: Improving Performance for Running on Older PCs

    - by Phil Sandler
    So, I'm building a WPF app and did a test deployment today, and found that it performed pretty poorly. I was surprised, as we are really not doing much in the way of visual effects or animations. I deployed on two machines: the fastest and the slowest that will need to run the application (the slowest PC has an Intel Celeron 1.80GHz with 2GB RAM). The application ran pretty well on the faster machine, but was choppy on the slower machine. And when I say "choppy", I mean the cursor jumped even just passing it over any open window of the app that had focus. I opened the Task Manager Performance window, and could see that the CPU usage jumped whenever the app had focus and the cursor was moving over it. If I gave focus to another (e.g. Excel), the CPU usage went back down after a second. This happened on both machines, but the choppiness was only noticeable on the slower machine. I had very limited time to tinker on the deployment machines, so didn't do a lot of detailed testing. The app runs fine on my development machine, but I also see the CPU spiking up to 10% there, just running the cursor over the window. I downloaded the WPF performance tool from MS and have been tinkering with it (on my dev machine). The docs say this about the "Frame Rate" metric in the Perforator tool: For applications without animation, this value should be near 0. The app is not doing any heavy animation, but the frame rate stays near 50 when the cursor is over any window. The screens I tested on have column headers in a grid that "highlight" and buttons that change color and appearance when scrolled over. Even moving the mouse on blank areas of the windows cause the same Frame rate and CPU usage (doesn't seem to be related to these minor animations). (Also, I am unable to figure out how to get anything but the two default tools--Perforator and Visual Profiler--installed into the WPF performance tool. That is probably a separate question). I also have Redgate's profiling tool, but I'm not sure if that can shed any light on rendering performance. So, I realize this is not an easy thing to troubleshoot without specifics or sample code (which I can't post). My questions are: What are some general things to look for (or avoid) in the code to improve performance? What steps can I take using the WPF performance tool to narrow down the problem? Is the PC spec listed above (Intel Celeron 1.80GHz with 2GB RAM) too slow to be running even vanilla WPF applications?

    Read the article

  • remove data layer and put into it's own domain

    - by user334768
    I have a SL4 application that uses EF4 & RIA Services. DB is SQL 2008. All is working well. Now I want to put the Database and web services on one domain (A.com) with the web service exposing the same methods available in my working project. (one listed at top of message) Then put a Silverlight application (same one as above) on domain(B.com) and call the web services on A.com. I thought I had a fair understanding of RIA Services. Enough to get the above application working. Now when I say "working" I do mean on my local dev machine. I have yet to deployed as SL4 & .NET 4 application to my hosting site. But I don't think I understand it well enough. I normally create a new business app, add EF then create the RIA DomainService. Add any [Includes] I need, modify my linq queries and run application. And it works. Now I need to break off my data layer and put it on another hosting site (A.com) And put my UI and business logic on another hosting site (B.com) I think I need to do the following : On the Database & web service site: domain(A.com) create application, create EF4, create RIA Services and deploy. At this time, are the methods exposed available as a "WEB SERVICE" to other applications calling by http:// a.com/serviceName.svc address? I think I need to do the following : On the application site : domain(B.com) create a business application (later will need authentication and navigation). How can I create an EF when I don't have access to the database? (I know I do have access but I want know what happens here when I do not have access to the database, but only data provided by a web service) If I can not create an EF how do I create my RIA Service? I hope any one who takes time to help me understands what I'm asking. Sorry so long.

    Read the article

  • Macports 1.8.2 fails to build db46 on os x 1.6.3

    - by themoch
    i'm trying to put a dev environment on my mac, and to do so i need to install several packages which require db46 when running sudo port install db46 i get the following error: ---> Computing dependencies for db46 ---> Fetching db46 ---> Attempting to fetch patch.4.6.21.1 from http://www.oracle.com/technology/products/berkeley-db/db/update/4.6.21/ ---> Attempting to fetch patch.4.6.21.2 from http://www.oracle.com/technology/products/berkeley-db/db/update/4.6.21/ ---> Attempting to fetch patch.4.6.21.3 from http://www.oracle.com/technology/products/berkeley-db/db/update/4.6.21/ ---> Attempting to fetch patch.4.6.21.4 from http://www.oracle.com/technology/products/berkeley-db/db/update/4.6.21/ ---> Attempting to fetch db-4.6.21.tar.gz from http://distfiles.macports.org/db4/4.6.21_6 ---> Verifying checksum(s) for db46 ---> Extracting db46 ---> Applying patches to db46 ---> Configuring db46 ---> Building db46 Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_databases_db46/work/db-4.6.21/build_unix" && /usr/bin/make -j2 all " returned error 2 Command output: ../dist/../libdb_java/db_java_wrap.c:9464: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' ../dist/../libdb_java/db_java_wrap.c:9487: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'jlong' ../dist/../libdb_java/db_java_wrap.c:9509: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' ../dist/../libdb_java/db_java_wrap.c:9532: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'jlong' ../dist/../libdb_java/db_java_wrap.c:9563: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'jint' ../dist/../libdb_java/db_java_wrap.c:9588: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'jlong' ../dist/../libdb_java/db_java_wrap.c:9613: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'jint' ../dist/../libdb_java/db_java_wrap.c:9638: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' ../dist/../libdb_java/db_java_wrap.c:9666: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'jlong' ../dist/../libdb_java/db_java_wrap.c:9691: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'jlong' ../dist/../libdb_java/db_java_wrap.c:9716: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' ../dist/../libdb_java/db_java_wrap.c:9739: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' ../dist/../libdb_java/db_java_wrap.c:9771: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' ../dist/../libdb_java/db_java_wrap.c:9796: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' ../dist/../libdb_java/db_java_wrap.c:9819: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' ../dist/../libdb_java/db_java_wrap.c:9842: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' ../dist/../libdb_java/db_java_wrap.c:9867: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'jobject' ../dist/../libdb_java/db_java_wrap.c:9899: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' ../dist/../libdb_java/db_java_wrap.c:9920: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' ../dist/../libdb_java/db_java_wrap.c:9943: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' ../dist/../libdb_java/db_java_wrap.c:9966: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'jstring' ../dist/../libdb_java/db_java_wrap.c:9991: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'jint' ../dist/../libdb_java/db_java_wrap.c:10010: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' ../dist/../libdb_java/db_java_wrap.c:10046: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' ../dist/../libdb_java/db_java_wrap.c:10071: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'void' make: *** [db_java_wrap.lo] Error 1 make: *** Waiting for unfinished jobs.... Note: Some input files use unchecked or unsafe operations. Note: Recompile with -Xlint:unchecked for details. cd ./classes && jar cf ../db.jar ./com/sleepycat Error: Status 1 encountered during processing. i have removed my /usr/local folder completely and it does not seem to help

    Read the article

  • Thinking about introducing PHP/MySQL into a .NET/SQL Server environment. Thoughts?

    - by abszero
    I posted this over at reddit but it didn't gain any momentum. So here is what is going on: our company was recently purchased by another web shop and I was promoted to head of development here in our office. Our office is completely .NET/SQL Server and the company who purchased us is a *nix/PHP/MySQL shop. Now several of our large clients who are on the .NET platform are up for complete rewrites (the sites are from '04 and are running on the 1.x framework.) While reviewing the proposal for one client with my superior I came across a pretty extensive module which would require several hundred man hours to complete and voiced some concern about it in relation to the quote. One of the guys from the PHP group happen to hear this and told me of a module that they (PHP Group) use in Drupal that does exactly what the proposal in front of me was describing and it only took, at most, 8 hours to completely setup / configure. My superior suggested that I take a look at Drupal and the module in question over the weekend but stressed that we should only go that route if it really made sense. So this weekend I spun up a CentOS instance in VirtualBox and started playing around with Drupal. I am still fleshing it out so don't have a solid opinion on it just yet. Anyway I have some questions / fears that I was hoping progit could help me out in! Has anyone had experience doing this and, if so, how did it turn out? I am completely ignorant to what IDE's (if any) are available to for PHP. The last time I worked with PHP it was in Notepad and that was less than intuitive. So is there are more intuitive IDE out there for PHP dev? I don't want to scare my .NET guys. Since the merger all of our new business clients that have had relatively small websites have gone on Drupal with the larger sites going on .NET. My concern is that if they see a large site go onto Drupal that they might start getting anxious and start handing out their resumes. For the foreseeable future there are no plans to liquidate the .NET platform and really we can't just from a support standpoint. What would be the best way to approach this? Any other helpful info? Thanks!

    Read the article

  • jQuery: resizing element cuts off parent's background

    - by Justine
    Hi, I've been trying to recreate an effect from this tutorial: http://jqueryfordesigners.com/jquery-look-tim-van-damme/ Unfortunately, I want a background image underneath and because of the resize going on in JavaScript, it gets resized and cut off as well, like so: http://dev.gentlecode.net/dotme/index-sample.html - you can view source there to check the HTML, but basic structure looks like this: <div class="page"> <div class="container"> div.header ul.nav div.main </div> </div> Here is my jQuery code: $('ul.nav').each(function() { var $links = $(this).find('a'), panelIds = $links.map(function() { return this.hash; }).get().join(","), $panels = $(panelIds), $panelWrapper = $panels.filter(':first').parent(), delay = 500; $panels.hide(); $links.click(function() { var $link = $(this), link = (this); if ($link.is('.current')) { return; } $links.removeClass('current'); $link.addClass('current'); $panels.animate({ opacity : 0 }, delay); $panelWrapper.animate({ height: 0 }, delay, function() { var height = $panels.hide().filter(link.hash).show().css('opacity', 1).outerHeight(); $panelWrapper.animate({ height: height }, delay); }); }); var showtab = window.location.hash ? '[hash=' + window.location.hash + ']' : ':first'; $links.filter(showtab).click(); }); In this example, panelWrapper is a div.main and it gets resized to fit the content of tabs. The background is applied to the div.page but because its child is getting resized, it resizes as well, cutting off the background image. It's hard to explain so please look at the link above to see what I mean. I guess what I'm trying to ask is: is there a way to resize an element without resizing its parent? I tried setting height and min-height of .page to 100% and 101% but that didn't work. I tried making the background image fixed, but nada. It also happens if I add the background to the body or even html. Help?

    Read the article

  • SpringBatch Jaxb2Marshaller: different name of class and xml attribute

    - by user588961
    I try to read an xml file as input for spring batch: Java Class: package de.example.schema.processes.standardprocess; @XmlAccessorType(XmlAccessType.FIELD) @XmlType(name = "Process", namespace = "http://schema.example.de/processes/process", propOrder = { "input" }) public class Process implements Serializable { @XmlElement(namespace = "http://schema.example.de/processes/process") protected ProcessInput input; public ProcessInput getInput() { return input; } public void setInput(ProcessInput value) { this.input = value; } } SpringBatch dev-job.xml: <bean id="exampleReader" class="org.springframework.batch.item.xml.StaxEventItemReader" scope="step"> <property name="fragmentRootElementName" value="input" /> <property name="resource" value="file:#{jobParameters['dateiname']}" /> <property name="unmarshaller" ref="jaxb2Marshaller" /> </bean> <bean id="jaxb2Marshaller" class="org.springframework.oxm.jaxb.Jaxb2Marshaller"> <property name="classesToBeBound"> <list> <value>de.example.schema.processes.standardprocess.Process</value> <value>de.example.schema.processes.standardprocess.ProcessInput</value> ... </list> </property> </bean> Input file: <?xml version="1.0" encoding="UTF-8"?> <process:process xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:process="http://schema.example.de/processes/process"> <process:input> ... </process:input> </process:process> It fires the following exception: [javax.xml.bind.UnmarshalException: unexpected element (uri:"http://schema.example.de/processes/process", local:"input"). Expected elements are <<{http://schema.example.de/processes/process}processInput] at org.springframework.oxm.jaxb.JaxbUtils.convertJaxbException(JaxbUtils.java:92) at org.springframework.oxm.jaxb.AbstractJaxbMarshaller.convertJaxbException(AbstractJaxbMarshaller.java:143) at org.springframework.oxm.jaxb.Jaxb2Marshaller.unmarshal(Jaxb2Marshaller.java:428) If I change to in xml it work's fine. Unfortunately I can change neither the xml nor the java class. Is there a possibility to make Jaxb2Marshaller map the element 'input' to the class 'ProcessInput'?

    Read the article

  • Can't get jQuery AutoComplete to work with External JSON

    - by rockinthesixstring
    I'm working on an ASP.NET app where I'm in need of jQuery AutoComplete. Currently there is nothing happening when I type data into the txt63 input box (and before you flame me for using a name like txt63, I know, I know... but it's not my call :D ). Here's my javascript code <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.min.js" type="text/javascript"></script> <script src="http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.1/jquery-ui.min.js" type="text/javascript"></script> <script src="http://jquery-ui.googlecode.com/svn/tags/latest/external/jquery.bgiframe-2.1.1.js" type="text/javascript"></script> <script src="http://ajax.googleapis.com/ajax/libs/jqueryui/1.8.1/i18n/jquery-ui-i18n.min.js" type="text/javascript"></script> <script language="javascript" type="text/javascript"> var theSource = '../RegionsAutoComplete.axd?PID=<%= hidden62.value %>' $(function () { $('#<%= txt63.ClientID %>').autocomplete({ source: theSource, minLength: 2, select: function (event, ui) { $('#<%= hidden63.ClientID %>').val(ui.item.id); } }); }); and here is my HTTP Handler Namespace BT.Handlers Public Class RegionsAutoComplete : Implements IHttpHandler Public ReadOnly Property IsReusable() As Boolean Implements System.Web.IHttpHandler.IsReusable Get Return False End Get End Property Public Sub ProcessRequest(ByVal context As System.Web.HttpContext) Implements System.Web.IHttpHandler.ProcessRequest 'the page contenttype is plain text context.Response.ContentType = "application/json" context.Response.ContentEncoding = Encoding.UTF8 'set page caching context.Response.Cache.SetExpires(DateTime.Now.AddHours(24)) context.Response.Cache.SetCacheability(HttpCacheability.Public) context.Response.Cache.SetSlidingExpiration(True) context.Response.Cache.VaryByParams("PID") = True Try ' use the RegionsDataContext Using RegionDC As New DAL.RegionsDataContext ' query the database based on the querysting PID Dim q = (From r In RegionDC.bt_Regions _ Where r.PID = context.Request.QueryString("PID") _ Select r.Region, r.ID) ' now we loop through the array ' and write out the ressults Dim sb As New StringBuilder sb.Append("{") For Each item In q sb.Append("""" & item.Region & """: """ & item.ID & """,") Next sb.Append("}") context.Response.Write(sb.ToString) End Using Catch ex As Exception HealthMonitor.Log(ex, False, "This error occurred while populating the autocomplete handler") End Try End Sub End Class End Namespace The rest of my ASPX page has the appropriate controls as I had this working with the old version of the jQuery library. I'm trying to get it working with the new one because I heard that the "dev" CDN was going to be obsolete. Any help or direction will be greatly appreciated.

    Read the article

  • Linker Issues with boost::thread under linux using Eclipse and CMake

    - by OcularProgrammer
    I'm in the process of attempting to port some code across from PC to Ubuntu, and am having some issues due to limited experience developing under linux. We use CMake to generate all our build stuff. Under windows I'm making VS2010 projects, and under Linux I'm making Eclipse projects. I've managed to get my OpenCV stuff ported across successfully, but am having major headaches trying to port my threaded boost apps. Just so we're clear, the steps I have followed so-far on a clean Ubuntu 12 installation. (I've done 2 clean re-installs to try and fix potential library cock-ups, now I'm just giving up and asking): Install Eclipse and Eclipse CDT using my package manager Install CMake and CMake Gui using my package manager Install libboost-all-dev using my package manager So-far that's all I've done. I can create the eclipse project using CMake with no errors, so CMake is successfully finding my boost install. When I try and build through eclipse is when I get issues; The app I'm attempting to build uses boost::asio for some UDP I/O and boost::thread to create worker threads for the asio I/O services. I can successfully compile each module, but when I come to link I get spammed with errors such as: /usr/bin/c++ CMakeFiles/RE05DevelopmentDemo.dir/main.cpp.o CMakeFiles/RE05DevelopmentDemo.dir/RE05FusionListener/RE05FusionListener.cpp.o CMakeFiles/RE05DevelopmentDemo.dir/NewEye/NewEye.cpp.o -o RE05DevelopmentDemo -rdynamic -Wl,-Bstatic -lboost_system-mt -lboost_date_time-mt -lboost_regex-mt -lboost_thread-mt -Wl,-Bdynamic /usr/lib/gcc/x86_64-linux-gnu/4.6/../../../../lib/libboost_thread-mt.a(thread.o): In function `void boost::call_once<void (*)()>(boost::once_flag&, void (*)()) [clone .constprop.98]': make[2]: Leaving directory `/home/david/Code/Build/Support/RE05DevDemo' (.text+0xc8): undefined reference to `pthread_key_create' /usr/lib/gcc/x86_64-linux-gnu/4.6/../../../../lib/libboost_thread-mt.a(thread.o): In function `boost::this_thread::interruption_enabled()': (.text+0x540): undefined reference to `pthread_getspecific' make[1]: Leaving directory `/home/david/Code/Build/Support/RE05DevDemo' /usr/lib/gcc/x86_64-linux-gnu/4.6/../../../../lib/libboost_thread-mt.a(thread.o): In function `boost::this_thread::disable_interruption::disable_interruption()': (.text+0x570): undefined reference to `pthread_getspecific' /usr/lib/gcc/x86_64-linux-gnu/4.6/../../../../lib/libboost_thread-mt.a(thread.o): In function `boost::this_thread::disable_interruption::disable_interruption()': (.text+0x59f): undefined reference to `pthread_getspecific' Some Gotchas that I have collected from other StackOverflow posts and have already checked: The boost libs are all present at /usr/lib I am not getting any compile errors for inability to find the boost headers, so they must be getting found. I am trying to link statically, but I believe eclipse should be passing the correct arguments to make that happen since my CMakeLists.txt includes SET(Boost_USE_STATIC_LIBS ON) I'm officially out of ideas here, I have tried doing local builds of boost and a bunch of other stuff with no more success. I even re-installed Ubuntu to ensure I haven't completely fracked the libs directories and links with multiple weird versions or anything else. Any help would be muchly appreciated.

    Read the article

  • data from few MySQL tables sorted by ASC

    - by Andrew
    In the dbase I 've few tables named as aaa_9xxx, aaa_9yyy, aaa_9zzz. I want to find all data with a specified DATE and show it with the TIME ASC. First, I must find a tables in the dbase: $STH_1a = $DBH->query("SELECT table_name FROM information_schema.tables WHERE table_name LIKE 'aaa\_9%' "); foreach($STH_1a as $row) { $table_name_s1[] = $row['table_name']; } Second, I must find a data wit a concrete date and show it with TIME ASC: foreach($table_name_s1 as $table_name_1) { $STH_1a2 = $DBH->query("SELECT * FROM `$table_name_1` WHERE date = '2011-11-11' ORDER BY time ASC "); while ($row = $STH_1a2->fetch(PDO::FETCH_ASSOC)) { echo " ".$table_name_1."-".$row['time']."-".$row['ei_name']." <br>"; } } .. but it shows the data sorted by tables name, then by TIME ASC. I must to have all this data (from all tables) sorted by TIME ASC. Thank You dev-null-dweller, Andrew Stubbs and Jaison Erick for your help. I test the Erick solution : foreach($STH_1a as $row) { $stmts[] = sprintf('SELECT * FROM %s WHERE date="%s"', $row['table_name'], '2011-11-11'); } $stmt = implode("\nUNION\n", $stmts); $stmt .= "\nORDER BY time ASC"; $STH_1a2 = $DBH->query($stmt); while ($row_1a2 = $STH_1a2->fetch(PDO::FETCH_ASSOC)) { echo " ".$row['table_name']."-".$row_1a2['time']."-".$row_1a2['ei_name']." <br>"; } it's working but I've problem with 'table_name' - it's always the LAST table name. //---------------------------------------------------------------------- end the ending solution with all fixes, thanks all for your help, :)) foreach($STH_1a as $row) { $stmts[] = sprintf("SELECT *, '%s' AS table_name FROM %s WHERE date='%s'", $row['table_name'], $row['table_name'], '2011-11- 11'); } $stmt = implode("\nUNION\n", $stmts); $stmt .= "\nORDER BY time ASC"; $STH_1a2 = $DBH->query($stmt); while ($row_1a2 = $STH_1a2->fetch(PDO::FETCH_ASSOC)) { echo " ".$row_1a2['table_name']."-".$row_1a2['time']."-".$row_1a2['ei_name']." <br>"; }

    Read the article

  • HTTP Handlers in Win2008/IIS7

    - by Keith Barrows
    We are migrating our web sites from Win2003/IIS6 to Win2008/IIS7. Our .NET code is in a WAP form with compiled binaries. I do dev work on a Win7/IIS7 box so had to learn early how to set up HTTP Handlers in this newer environment. What I have that has worked fine on my box is: <system.webServer> <handlers> <remove name="WebServiceHandlerFactory-Integrated" /> <remove name="ScriptHandlerFactory" /> <remove name="ScriptHandlerFactoryAppServices" /> <remove name="ScriptResource" /> <add name="RivWorks" path="*.riv" verb="*" modules="IsapiModule" scriptProcessor="C:\Windows\Microsoft.NET\Framework\v2.0.50727\aspnet_isapi.dll" resourceType="Unspecified" requireAccess="Script" preCondition="classicMode,runtimeVersionv2.0,bitness32" /> <add name="RivWorks2" path="*.riv2" verb="*" modules="IsapiModule" scriptProcessor="C:\Windows\Microsoft.NET\Framework\v2.0.50727\aspnet_isapi.dll" resourceType="Unspecified" requireAccess="Script" preCondition="classicMode,runtimeVersionv2.0,bitness32" /> <add name="ScriptHandlerFactory" verb="*" path="*.asmx" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="ScriptHandlerFactoryAppServices" verb="*" path="*_AppService.axd" preCondition="integratedMode" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="ScriptResource" verb="GET,HEAD" path="ScriptResource.axd" preCondition="integratedMode" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </handlers> All I am getting on the new web site when I try to call into the *.riv handler is: 404 - File or directory not found. The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable. OK. You see interesting things when writing out these questions. Our server is setup in integrated mode and runs on a x64 system. So, I changed the precondition clause to: preCondition="integratedMode,runtimeVersionv2.0,bitness64" Now I get this instead: 500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed. Any ideas of what I should be doing, where I should be looking? TIA

    Read the article

  • Generics vs Object performance

    - by Risho
    I'm doing practice problems from MCTS Exam 70-536 Microsft .Net Framework Application Dev Foundation, and one of the problems is to create two classes, one generic, one object type that both perform the same thing; in which a loop uses the class and iterated over thousand times. And using the timer, time the performance of both. There was another post at C# generics question that seeks the same questoion but nonone replied. Basically if in my code I run the generic class first it takes loger to process. If I run the object class first than the object class takes longer to process. The whole idea was to prove that generics perform faster. I used the original users code to save me some time. I didn't particularly see anything wrong with the code and was puzzled by the outcome. Can some one explain why the unusual results? Thanks, Risho Here is the code: class Program { class Object_Sample { public Object_Sample() { Console.WriteLine("Object_Sample Class"); } public long getTicks() { return DateTime.Now.Ticks; } public void display(Object a) { Console.WriteLine("{0}", a); } } class Generics_Samle<T> { public Generics_Samle() { Console.WriteLine("Generics_Sample Class"); } public long getTicks() { return DateTime.Now.Ticks; } public void display(T a) { Console.WriteLine("{0}", a); } } static void Main(string[] args) { long ticks_initial, ticks_final, diff_generics, diff_object; Object_Sample OS = new Object_Sample(); Generics_Samle<int> GS = new Generics_Samle<int>(); //Generic Sample ticks_initial = 0; ticks_final = 0; ticks_initial = GS.getTicks(); for (int i = 0; i < 50000; i++) { GS.display(i); } ticks_final = GS.getTicks(); diff_generics = ticks_final - ticks_initial; //Object Sample ticks_initial = 0; ticks_final = 0; ticks_initial = OS.getTicks(); for (int j = 0; j < 50000; j++) { OS.display(j); } ticks_final = OS.getTicks(); diff_object = ticks_final - ticks_initial; Console.WriteLine("\nPerformance of Generics {0}", diff_generics); Console.WriteLine("Performance of Object {0}", diff_object); Console.ReadKey(); } }

    Read the article

  • Can I have a workspace that is both a git workspace and a svn workspace?

    - by Troy
    I have checked out now a local working copy of a codebase that lives in an svn repo. It's a big Java project that I use Eclipse to develop in. Eclipse of course builds everything on the fly, in it's own way with all the binaries ending up in [project root]/bin. That's perfectly fine with me, for development, but when the build runs on the build server, it looks quite a lot different (maven build, binaries end up in a different directory structure, etc). Sometimes I need to recreate the build server environment on my local development system to debug the build or what have you, so I usually end up downloading an entirely new working copy into a new workspace and running the build from there (prevents cluttering my development workspace with all the build artifacts and dirtying up the working copy). Of course sometimes I'm interested in running the full build on code that I don't want to check in yet, so I will manually copy over the "development" workspace onto the "build" workspace. Besides taking a lot of extra time copying a lot of files that I don't actually need (just overlaying the new over the old), this also screws up my svn metadata, meaning that I can't check in changes from that "build workspace" working copy, and I often end up having to re-download the code to get it back into a known state. So I'm thinking I make my svn working copy a local git repo, then "check out" the in-development code from the svn working copy/git master, into the local build workspace. Then I can build, revert my changes, have all the advantages of a version controlled working copy in the build workspace. Then if I need to make changes to the build, push those back into the git master (which is also a svn working copy), then check them into the main svn repo. |-------------| |main svn repo| <------- |---------------------| |-------------| |svn working copy | <------- |--------------------| | (svn dev workspace/ | | non-svn-versioned | | git master) | | build workspace | |---------------------| | (git working copy) | |--------------------| Just switching everything to git would obviously be better, but, big company, too many people using svn, too costly to change everything, etc. We're stuck with svn as the main repo for now. BTW, I know there is a maven plugin for Eclipse and everything, I'm mainly interested to know if there is a way to maintain a workspace that is both a git working copy and an svn working copy. Actually any distributed version control system would probably work (hg possibly?). Advice? How does everybody else handle this situation of having a to manage both a "development" build process and a "production" build process?

    Read the article

  • Download a file using cocoa

    - by dododedodonl
    Hi All, I want to download a file to the downloads folder. I searched google for this and found the NSURLDownload class. I've read the page in the dev center and created this code (with some copy and pasting) this code: @implementation Downloader @synthesize downloadResponse; - (void)startDownloadingURL:(NSString*)downloadUrl destenation:(NSString*)destenation { // create the request NSURLRequest *theRequest=[NSURLRequest requestWithURL:[NSURL URLWithString:downloadUrl] cachePolicy:NSURLRequestUseProtocolCachePolicy timeoutInterval:60.0]; // create the connection with the request // and start loading the data NSURLDownload *theDownload=[[NSURLDownload alloc] initWithRequest:theRequest delegate:self]; if (!theDownload) { NSLog(@"Download could not be made..."); } } - (void)download:(NSURLDownload *)download decideDestinationWithSuggestedFilename:(NSString *)filename { NSString *destinationFilename; NSString *homeDirectory=NSHomeDirectory(); destinationFilename=[[homeDirectory stringByAppendingPathComponent:@"Desktop"] stringByAppendingPathComponent:filename]; [download setDestination:destinationFilename allowOverwrite:NO]; } - (void)download:(NSURLDownload *)download didFailWithError:(NSError *)error { // release the connection [download release]; // inform the user NSLog(@"Download failed! Error - %@ %@", [error localizedDescription], [[error userInfo] objectForKey:NSErrorFailingURLStringKey]); } - (void)downloadDidFinish:(NSURLDownload *)download { // release the connection [download release]; // do something with the data NSLog(@"downloadDidFinish"); } - (void)setDownloadResponse:(NSURLResponse *)aDownloadResponse { [aDownloadResponse retain]; [downloadResponse release]; downloadResponse = aDownloadResponse; } - (void)download:(NSURLDownload *)download didReceiveResponse:(NSURLResponse *)response { // reset the progress, this might be called multiple times bytesReceived = 0; // retain the response to use later [self setDownloadResponse:response]; } - (void)download:(NSURLDownload *)download didReceiveDataOfLength:(unsigned)length { long long expectedLength = [[self downloadResponse] expectedContentLength]; bytesReceived = bytesReceived+length; if (expectedLength != NSURLResponseUnknownLength) { percentComplete = (bytesReceived/(float)expectedLength)*100.0; NSLog(@"Percent - %f",percentComplete); } else { NSLog(@"Bytes received - %d",bytesReceived); } } -(NSURLRequest *)download:(NSURLDownload *)download willSendRequest:(NSURLRequest *)request redirectResponse:(NSURLResponse *)redirectResponse { NSURLRequest *newRequest=request; if (redirectResponse) { newRequest=nil; } return newRequest; } @end But my problem is now, it doesn't appear on the desktop as specified. And I want to put it in downloads and not on the desktop... What do I have to do?

    Read the article

  • Binding on a port with netpipes/netcat

    - by mindas
    I am trying to write a simple bash script that is listening on a port and responding with a trivial HTTP response. My specific issue is that I am not sure if the port is available and in case of bind failure I fall back to next port until bind succeeds. So far to me the easiest way to achieve this was something like: for (( i=$PORT_BASE; i < $(($PORT_BASE+$PORT_RANGE)); i++ )) do if [ $DEBUG -eq 1 ] ; then echo trying to bind on $i fi /usr/bin/faucet $i --out --daemon echo test 2>/dev/null if [ $? -eq 0 ] ; then #success? port=$i if [ $DEBUG -eq 1 ] ; then echo "bound on port $port" fi break fi done Here I am using faucet from netpipes Ubuntu package. The problem with this is that if I simply print "test" to the output, curl complains about non-standard HTTP response (error code 18). That's fair enough as I don't print HTTP-compatible response. If I replace echo test with echo -ne "HTTP/1.0 200 OK\r\n\r\ntest", curl still complains: user@server:$ faucet 10020 --out --daemon echo -ne "HTTP/1.0 200 OK\r\n\r\ntest" ... user@client:$ curl ip.of.the.server:10020 curl: (56) Failure when receiving data from the peer I think the problem lies in how faucet is printing the response and handling the connection. For example if I do the server side in netcat, curl works fine: user@server:$ echo -ne "HTTP/1.0 200 OK\r\n\r\ntest\r\n" | nc -l 10020 ... user@client:$ curl ip.of.the.server:10020 test user@client:$ I would be more than happy to replace faucet with netcat in my main script, but the problem is that I want to spawn independent server process to be able to run client from the same base shell. faucet has a very handy --daemon parameter as it forks to background and I can use $? (exit status code) to check if bind succeeded. If I was to use netcat for a similar purpose, I would have to fork it using & and $? would not work. Does anybody know why faucet isn't responding correctly in this particular case and/or can suggest a solution to this problem. I am not married neither to faucet nor netcat but would like the solution to be implemented using bash or it's utilities (as opposed to write something in yet another scripting language, such as Perl or Python).

    Read the article

  • How can I obtain the IPv4 address of the client?

    - by Dr Dork
    Hello! I'm prepping for a simple work project and am trying to familiarize myself with the basics of socket programming in a Unix dev environment. At this point, I have some basic server side code setup to listen for incoming TCP connection requests from clients after the parent socket has been created and is set to listen... int sockfd, newfd; unsigned int len; socklen_t sin_size; char msg[]="Test message sent"; char buf[MAXLEN]; int st, rv; struct addrinfo hints, *serverinfo, *p; struct sockaddr_storage client; char ip[INET6_ADDRSTRLEN]; . . //parent socket creation and listen code omitted for simplicity . //wait for connection requests from clients while(1) { //Returns the socketID and address of client connecting to socket if( ( newfd = accept(sockfd, (struct sockaddr *)&client, &len) ) == -1 ){ perror("Accept"); exit(-1); } if( (rv = recv(newfd, buf, MAXLEN-1, 0 )) == -1) { perror("Recv"); exit(-1); } struct sockaddr_in *clientAddr = ( struct sockaddr_in *) get_in_addr((struct sockaddr *)&client); inet_ntop(client.ss_family, clientAddr, ip, sizeof ip); printf("Receive from %s: query type is %s\n", ip, buf); if( ( st = send(newfd, msg, strlen(msg), 0)) == -1 ) { perror("Send"); exit(-1); } //ntohs is used to avoid big-endian and little endian compatibility issues printf("Send %d byte to port %d\n", ntohs(clientAddr->sin_port) ); close(newfd); } } I found the get_in_addr function online and placed it at the top of my code and use it to obtain the IP address of the client connecting... // get sockaddr, IPv4 or IPv6: void *get_in_addr(struct sockaddr *sa) { if (sa->sa_family == AF_INET) { return &(((struct sockaddr_in*)sa)->sin_addr); } return &(((struct sockaddr_in6*)sa)->sin6_addr); } but the function always returns the IPv6 IP address since thats what the sa_family property is set as. My question is, is the IPv4 IP address stored anywhere in the data I'm using and, if so, how can I access it? Thanks so much in advance for all your help!

    Read the article

  • Windows MAchine Debugging

    - by PrettyFlower
    I've been learning how to program for Windows for some time now and am getting pretty comfy with COM. I had thought to go over to Linux and do some C++ programming there and I wished to run Rosetta Commons so I installed Fedora. I had tried installing Ubuntu a few months ago and things got messy. I had a glitch, maybe caused by one of the live cd creators, my video card or something I don't know. Who Crashed suggested it was my video card and I had regular messages about ntfs.sys and page file issues. At any rate I just installed Fedora and the same thing is happening again. I would like to think with the twenty five years of doing this that I might finally make some headway into debugging my system. I think I may have overlooked a lot of what could be done in favor of simply uninstalling, reinstalling and formatting and starting from scratch. I have opened up the folder windows debugging tools, quite accidentally and just before I was going to clean sweep again, and I found KD and WinDbg. I had never seen these before and I felt that maybe I should look into this. I am quite familiar with the modern machine that is known as the computer, I know what a Kernel is and am now pretty familiar with at the very least Windows Operating System Services. I wish to begin tracking my own machines errors. I understand that most kernel debugging is done on a second machine but I don't have one. And also I understand the goal of the debugger seems to be less about run of the mill errors and more about development time strategies but I'm sure there is more to this. This is my first go at this and I thought maybe I could get some suggestions on where to go from here. I would really like to learn ways to fix my machine and also maybe pick up some tricks on the dev side as well. I hope this isn't too broad a question or too generalized. I'm really just looking for the keywords and an overview of the more routine strategies used. thx

    Read the article

  • IE dynamic image caching issue?

    - by rdevitt
    I have an html page that is loading multiple iframes into which are embedded dynamic images created from a Tomcat server page (.jsp). This works as expected from Chrome and Firefox, but for some reason IE displays all of the images the same (as the first image). I've created an example: http://coupondiscounts.com/dev/jsImageTest.html jsImageTest.html -- This page simply loads 6 instances of the testImageFrame.html page in separate iframes one-at-a-time, using Javascript. testImageFrame.html -- This is the page loaded in all the iframes. It contains only a JavaScript block that writes out the current time and an img tag. The img is dynamically generated by a .jsp page on a different server. It should be a white box on a black background. In the box are the current time (from the Tomcat server using Java) and a randomly created double between 0 & 1. What happens (in IE): The page almost instantly loads four identical iframes. Depending on the speed of your machine, the JavaScript times may vary by a second or two. The images' times will all be the same as will be the random number. This holds true even for the last two iframes which are loaded 5 and 10 seconds after the others (using JavaScript setTimeout()). What should happen (as it does in Chrome and FF): The page loads the same 4 iframes, but the random numbers in the images will be different. The times in the images occasionally span a second as well. Anyone have a clue as to what's going on here? Is IE doing some strange caching? The image header has "no-cache," "no-store" and all that. I've tried it on IE6 and 7. You can use the "Next" button to create another iframe. In IE, the images are always the same. Notes: I don't really need iframes, just the images, but if I only use img tags, the problem appears in Chrome and FF as well. I also don't really need to load these iframes dynamically, I was just trying to abstract the issue further and allow a delayed load for the latter 2 images.

    Read the article

  • A versioning workflow for multiple similar (but not identical) deployments

    - by rs77
    I'm currently employed at a small non-tech organisation and have been given the role of coding the organisations' website. While I have enjoyed the task and have learnt much with web dev I've encountered a few issues that I'm hoping someone will be able to help with me or at least point me in the right direction on. A little background: The site I work on has subdomains that each have their own separate WordPress installation on - as this has been the easiest "backend" admin panel for the type of user who will be responsible for updating content (etc). Within the organisation I work under the Marketing Manager (MM) and I code according to his style guide and wire frames. While we have been working with only one subdomain since the beginning of the year the project has been relatively simple and straightforward. However, lately the workflow is becoming a little more complicated as our original subdomain has been copied over to the other subdomains. Each of the new subdomains receives minor edits to their stylesheets (eg. different pictures for background, slightly different colours here and there, etc). The issue: At the moment managing all the different subdomains has been "bearable", but the straw that's braking the camel's back at the moment has been the slight reversions the MM has required now that the CEO has seen the final product. The problem I'm having with reversions in stylesheets is that the CEO will one week state that he likes change "X" and then as the MM and I continue to modify the site (to now "Z"), will another week state that he wants us to change "X" to "W" but keeping most of the changes made in "Y". What I'm looking for is something that allows for: tracking file changes reverting changes made (or reverting back to 'a' from 'e' but including changes 'b' & 'c') easily upload necessary files to their respective WP-theme installation Does anything out there come close to addressing these issues? If so, what? Thanks for any help! PS - I'm learning Git at the moment and it seems to do the "tracking file changes" quite nicely. Haven't learnt about the reverting changes bit yet, though. Maybe for my final point I'm thinking of creating a shell script to automatically upload the files to their folders. Does Git do this too though? Addendum (alexbbrown) I had a similar problem: I ran a custom version of mediawiki where I installed various extensions in the versioned core (with svn). Each of the extensions required an section in the confit file, but the confit file also needed local configuration for each of several deployments. I could have implemented it using includes, but they would not be versioned; and rebasing branches each time is a chore. +50 experience points for a good answer in git.

    Read the article

  • How can I obtain the IP address of my server program?

    - by Dr Dork
    Hello! This question is related to another question I just posted. I'm prepping for a simple work project and am trying to familiarize myself with the basics of socket programming in a Unix dev environment. At this point, I have some basic server side code and client side code setup to communicate. Currently, my client code successfully connects to the server code and the server code sends it a test message, then both quit out. Perfect! That's exactly what I wanted to accomplish. Now I'm playing around with the functions used to obtain info about the two environments (server and client). I'd like to obtain my server program's IP address. Here's the code I currently have to do this, but it's not working... int sockfd; unsigned int len; socklen_t sin_size; char msg[]="test message"; char buf[MAXLEN]; int st, rv; struct addrinfo hints, *serverinfo, *p; struct sockaddr_storage client; char s[INET6_ADDRSTRLEN]; char ip[INET6_ADDRSTRLEN]; //zero struct memset(&hints,0,sizeof(hints)); hints.ai_family = AF_UNSPEC; hints.ai_socktype = SOCK_STREAM; hints.ai_flags = AI_PASSIVE; //get the server info if((rv = getaddrinfo(NULL, SERVERPORT, &hints, &serverinfo ) != 0)){ perror("getaddrinfo"); exit(-1); } // loop through all the results and bind to the first we can for( p = serverinfo; p != NULL; p = p->ai_next) { //Setup the socket if( (sockfd = socket( p->ai_family, p->ai_socktype, p->ai_protocol )) == -1 ) { perror("socket"); continue; } //Associate a socket id with an address to which other processes can connect if(bind(sockfd, p->ai_addr, p->ai_addrlen) == -1){ close(sockfd); perror("bind"); continue; } break; } if( p == NULL ){ perror("Fail to bind"); } inet_ntop(p->ai_family, get_in_addr((struct sockaddr *)p->ai_addr), s, sizeof(s)); printf("Server has TCP Port %s and IP Address %s\n", SERVERPORT, s); and the output for the IP is always empty... server has TCP Port 21412 and IP Address :: any ideas for what I'm missing? thanks in advance for your help! this stuff is really complicated at first.

    Read the article

  • rake db:create not working for legacy rails app (2.3.5) using MySQL (5.5.28)

    - by ridicter
    I'm a new Rails Developer, and I'm working on a legacy Rails app. Whenever I run the rake db:create command, I get an error that the database couldn't be created. I have found many StackOverflow questions related to this, but in troubleshooting nearly all permutations of solutions, I couldn't resolve the issue. I created the three Dbs (dev, prod, test), created the user with all access privileges to these dbs, and ran rake db:create. I'm running Mac OS X Lion, MySQL 5.5.28, Rails 2.3.5, Ruby 1.8.7. Here are my settings development: adapter: mysql encoding: utf8 database: adva_development username: adva password: **** host: localhost socket: /tmp/mysql.sock Here's the error: Couldn't create database for {"adapter"=>"mysql", "username"=>"adva", "host"=>"localhost", "encoding"=>"utf8", "database"=>"adva_development", "socket"=>"/tmp/mysql.sock", "password"=>"****"}, charset: utf8, collation: utf8_unicode_ci (if you set the charset manually, make sure you have a matching collation) I have done the following troubleshooting: Verified user and password are correct, and the user has access to the DB. (Double checked user access with SELECT * FROM mysql.db WHERE Db = 'adva_development' \G; User has all privileges.) Verify the socket is correct. I don't really understand sockets, but I can plainly see it at /tmp/mysql.sock. Checked collation and character set. I found out I had created the DB in latin charset and collation, so I recreated them. I ran show variables like "collation_database"; and show variables like "character_set_database"; and came back with utf8 and utf8_unicode_ci respectively. I followed the instructions in this question. After uninstalling mysql gem, I ran the following but came up with the same error: gem install --no-rdoc --no-ri mysql -- --with-mysql-dir=/usr/local/mysql-5.5.28-osx10.6-x86_64/bin --with-mysql-config=/usr/local/mysql-5.5.28-osx10.6-x86_64/bin/mysql_config Following Matt's suggestion, here's what a rake --trace db:create reveals: ** Invoke db:create (first_time) ** Invoke db:load_config (first_time) ** Invoke rails_env (first_time) ** Execute rails_env ** Execute db:load_config ** Execute db:create Couldn't create database for {"database"=>"adva_development", "adapter"=>"mysql", "host"=>"127.0.0.1", "password"=>"woof2adva", "username"=>"adva", "encoding"=>"utf8"}, charset: utf8, collation: utf8_unicode_ci (if you set the charset manually, make sure you have a matching collation) After 3 days and six or seven hours, I have pretty much run out of options. I tried various random things, like replacing localhost with 127.0.0.1 to no avail. Could there be something wrong related to my specific environment? Mac OS X Lion + MySQL 5.5.28? I plan on trying on setting up everything in a Linux environment. Thanks!

    Read the article

  • Agile Development

    - by James Oloo Onyango
    Alot of literature has and is being written about agile developement and its surrounding philosophies. In my quest to find the best way to express the importance of agile methodologies, i have found Robert C. Martin's "A Satire Of Two Companies" to be both the most concise and thorough! Enjoy the read! Rufus Inc Project Kick Off Your name is Bob. The date is January 3, 2001, and your head still aches from the recent millennial revelry. You are sitting in a conference room with several managers and a group of your peers. You are a project team leader. Your boss is there, and he has brought along all of his team leaders. His boss called the meeting. "We have a new project to develop," says your boss's boss. Call him BB. The points in his hair are so long that they scrape the ceiling. Your boss's points are just starting to grow, but he eagerly awaits the day when he can leave Brylcream stains on the acoustic tiles. BB describes the essence of the new market they have identified and the product they want to develop to exploit this market. "We must have this new project up and working by fourth quarter October 1," BB demands. "Nothing is of higher priority, so we are cancelling your current project." The reaction in the room is stunned silence. Months of work are simply going to be thrown away. Slowly, a murmur of objection begins to circulate around the conference table.   His points give off an evil green glow as BB meets the eyes of everyone in the room. One by one, that insidious stare reduces each attendee to quivering lumps of protoplasm. It is clear that he will brook no discussion on this matter. Once silence has been restored, BB says, "We need to begin immediately. How long will it take you to do the analysis?" You raise your hand. Your boss tries to stop you, but his spitwad misses you and you are unaware of his efforts.   "Sir, we can't tell you how long the analysis will take until we have some requirements." "The requirements document won't be ready for 3 or 4 weeks," BB says, his points vibrating with frustration. "So, pretend that you have the requirements in front of you now. How long will you require for analysis?" No one breathes. Everyone looks around to see whether anyone has some idea. "If analysis goes beyond April 1, we have a problem. Can you finish the analysis by then?" Your boss visibly gathers his courage: "We'll find a way, sir!" His points grow 3 mm, and your headache increases by two Tylenol. "Good." BB smiles. "Now, how long will it take to do the design?" "Sir," you say. Your boss visibly pales. He is clearly worried that his 3 mms are at risk. "Without an analysis, it will not be possible to tell you how long design will take." BB's expression shifts beyond austere.   "PRETEND you have the analysis already!" he says, while fixing you with his vacant, beady little eyes. "How long will it take you to do the design?" Two Tylenol are not going to cut it. Your boss, in a desperate attempt to save his new growth, babbles: "Well, sir, with only six months left to complete the project, design had better take no longer than 3 months."   "I'm glad you agree, Smithers!" BB says, beaming. Your boss relaxes. He knows his points are secure. After a while, he starts lightly humming the Brylcream jingle. BB continues, "So, analysis will be complete by April 1, design will be complete by July 1, and that gives you 3 months to implement the project. This meeting is an example of how well our new consensus and empowerment policies are working. Now, get out there and start working. I'll expect to see TQM plans and QIT assignments on my desk by next week. Oh, and don't forget that your crossfunctional team meetings and reports will be needed for next month's quality audit." "Forget the Tylenol," you think to yourself as you return to your cubicle. "I need bourbon."   Visibly excited, your boss comes over to you and says, "Gosh, what a great meeting. I think we're really going to do some world shaking with this project." You nod in agreement, too disgusted to do anything else. "Oh," your boss continues, "I almost forgot." He hands you a 30-page document. "Remember that the SEI is coming to do an evaluation next week. This is the evaluation guide. You need to read through it, memorize it, and then shred it. It tells you how to answer any questions that the SEI auditors ask you. It also tells you what parts of the building you are allowed to take them to and what parts to avoid. We are determined to be a CMM level 3 organization by June!"   You and your peers start working on the analysis of the new project. This is difficult because you have no requirements. But from the 10-minute introduction given by BB on that fateful morning, you have some idea of what the product is supposed to do.   Corporate process demands that you begin by creating a use case document. You and your team begin enumerating use cases and drawing oval and stick diagrams. Philosophical debates break out among the team members. There is disagreement as to whether certain use cases should be connected with <<extends>> or <<includes>> relationships. Competing models are created, but nobody knows how to evaluate them. The debate continues, effectively paralyzing progress.   After a week, somebody finds the iceberg.com Web site, which recommends disposing entirely of <<extends>> and <<includes>> and replacing them with <<precedes>> and <<uses>>. The documents on this Web site, authored by Don Sengroiux, describes a method known as stalwart-analysis, which claims to be a step-by-step method for translating use cases into design diagrams. More competing use case models are created using this new scheme, but again, people can't agree on how to evaluate them. The thrashing continues. More and more, the use case meetings are driven by emotion rather than by reason. If it weren't for the fact that you don't have requirements, you'd be pretty upset by the lack of progress you are making. The requirements document arrives on February 15. And then again on February 20, 25, and every week thereafter. Each new version contradicts the previous one. Clearly, the marketing folks who are writing the requirements, empowered though they might be, are not finding consensus.   At the same time, several new competing use case templates have been proposed by the various team members. Each template presents its own particularly creative way of delaying progress. The debates rage on. On March 1, Prudence Putrigence, the process proctor, succeeds in integrating all the competing use case forms and templates into a single, all-encompassing form. Just the blank form is 15 pages long. She has managed to include every field that appeared on all the competing templates. She also presents a 159- page document describing how to fill out the use case form. All current use cases must be rewritten according to the new standard.   You marvel to yourself that it now requires 15 pages of fill-in-the-blank and essay questions to answer the question: What should the system do when the user presses Return? The corporate process (authored by L. E. Ott, famed author of "Holistic Analysis: A Progressive Dialectic for Software Engineers") insists that you discover all primary use cases, 87 percent of all secondary use cases, and 36.274 percent of all tertiary use cases before you can complete analysis and enter the design phase. You have no idea what a tertiary use case is. So in an attempt to meet this requirement, you try to get your use case document reviewed by the marketing department, which you hope will know what a tertiary use case is.   Unfortunately, the marketing folks are too busy with sales support to talk to you. Indeed, since the project started, you have not been able to get a single meeting with marketing, which has provided a never-ending stream of changing and contradictory requirements documents.   While one team has been spinning endlessly on the use case document, another team has been working out the domain model. Endless variations of UML documents are pouring out of this team. Every week, the model is reworked.   The team members can't decide whether to use <<interfaces>> or <<types>> in the model. A huge disagreement has been raging on the proper syntax and application of OCL. Others on the team just got back from a 5-day class on catabolism, and have been producing incredibly detailed and arcane diagrams that nobody else can fathom.   On March 27, with one week to go before analysis is to be complete, you have produced a sea of documents and diagrams but are no closer to a cogent analysis of the problem than you were on January 3. **** And then, a miracle happens.   **** On Saturday, April 1, you check your e-mail from home. You see a memo from your boss to BB. It states unequivocally that you are done with the analysis! You phone your boss and complain. "How could you have told BB that we were done with the analysis?" "Have you looked at a calendar lately?" he responds. "It's April 1!" The irony of that date does not escape you. "But we have so much more to think about. So much more to analyze! We haven't even decided whether to use <<extends>> or <<precedes>>!" "Where is your evidence that you are not done?" inquires your boss, impatiently. "Whaaa . . . ." But he cuts you off. "Analysis can go on forever; it has to be stopped at some point. And since this is the date it was scheduled to stop, it has been stopped. Now, on Monday, I want you to gather up all existing analysis materials and put them into a public folder. Release that folder to Prudence so that she can log it in the CM system by Monday afternoon. Then get busy and start designing."   As you hang up the phone, you begin to consider the benefits of keeping a bottle of bourbon in your bottom desk drawer. They threw a party to celebrate the on-time completion of the analysis phase. BB gave a colon-stirring speech on empowerment. And your boss, another 3 mm taller, congratulated his team on the incredible show of unity and teamwork. Finally, the CIO takes the stage to tell everyone that the SEI audit went very well and to thank everyone for studying and shredding the evaluation guides that were passed out. Level 3 now seems assured and will be awarded by June. (Scuttlebutt has it that managers at the level of BB and above are to receive significant bonuses once the SEI awards level 3.)   As the weeks flow by, you and your team work on the design of the system. Of course, you find that the analysis that the design is supposedly based on is flawedno, useless; no, worse than useless. But when you tell your boss that you need to go back and work some more on the analysis to shore up its weaker sections, he simply states, "The analysis phase is over. The only allowable activity is design. Now get back to it."   So, you and your team hack the design as best you can, unsure of whether the requirements have been properly analyzed. Of course, it really doesn't matter much, since the requirements document is still thrashing with weekly revisions, and the marketing department still refuses to meet with you.     The design is a nightmare. Your boss recently misread a book named The Finish Line in which the author, Mark DeThomaso, blithely suggested that design documents should be taken down to code-level detail. "If we are going to be working at that level of detail," you ask, "why don't we simply write the code instead?" "Because then you wouldn't be designing, of course. And the only allowable activity in the design phase is design!" "Besides," he continues, "we have just purchased a companywide license for Dandelion! This tool enables 'Round the Horn Engineering!' You are to transfer all design diagrams into this tool. It will automatically generate our code for us! It will also keep the design diagrams in sync with the code!" Your boss hands you a brightly colored shrinkwrapped box containing the Dandelion distribution. You accept it numbly and shuffle off to your cubicle. Twelve hours, eight crashes, one disk reformatting, and eight shots of 151 later, you finally have the tool installed on your server. You consider the week your team will lose while attending Dandelion training. Then you smile and think, "Any week I'm not here is a good week." Design diagram after design diagram is created by your team. Dandelion makes it very difficult to draw these diagrams. There are dozens and dozens of deeply nested dialog boxes with funny text fields and check boxes that must all be filled in correctly. And then there's the problem of moving classes between packages. At first, these diagram are driven from the use cases. But the requirements are changing so often that the use cases rapidly become meaningless. Debates rage about whether VISITOR or DECORATOR design patterns should be used. One developer refuses to use VISITOR in any form, claiming that it's not a properly object-oriented construct. Someone refuses to use multiple inheritance, since it is the spawn of the devil. Review meetings rapidly degenerate into debates about the meaning of object orientation, the definition of analysis versus design, or when to use aggregation versus association. Midway through the design cycle, the marketing folks announce that they have rethought the focus of the system. Their new requirements document is completely restructured. They have eliminated several major feature areas and replaced them with feature areas that they anticipate customer surveys will show to be more appropriate. You tell your boss that these changes mean that you need to reanalyze and redesign much of the system. But he says, "The analysis phase is system. But he says, "The analysis phase is over. The only allowable activity is design. Now get back to it."   You suggest that it might be better to create a simple prototype to show to the marketing folks and even some potential customers. But your boss says, "The analysis phase is over. The only allowable activity is design. Now get back to it." Hack, hack, hack, hack. You try to create some kind of a design document that might reflect the new requirements documents. However, the revolution of the requirements has not caused them to stop thrashing. Indeed, if anything, the wild oscillations of the requirements document have only increased in frequency and amplitude.   You slog your way through them.   On June 15, the Dandelion database gets corrupted. Apparently, the corruption has been progressive. Small errors in the DB accumulated over the months into bigger and bigger errors. Eventually, the CASE tool just stopped working. Of course, the slowly encroaching corruption is present on all the backups. Calls to the Dandelion technical support line go unanswered for several days. Finally, you receive a brief e-mail from Dandelion, informing you that this is a known problem and that the solution is to purchase the new version, which they promise will be ready some time next quarter, and then reenter all the diagrams by hand.   ****   Then, on July 1 another miracle happens! You are done with the design!   Rather than go to your boss and complain, you stock your middle desk drawer with some vodka.   **** They threw a party to celebrate the on-time completion of the design phase and their graduation to CMM level 3. This time, you find BB's speech so stirring that you have to use the restroom before it begins. New banners and plaques are all over your workplace. They show pictures of eagles and mountain climbers, and they talk about teamwork and empowerment. They read better after a few scotches. That reminds you that you need to clear out your file cabinet to make room for the brandy. You and your team begin to code. But you rapidly discover that the design is lacking in some significant areas. Actually, it's lacking any significance at all. You convene a design session in one of the conference rooms to try to work through some of the nastier problems. But your boss catches you at it and disbands the meeting, saying, "The design phase is over. The only allowable activity is coding. Now get back to it."   ****   The code generated by Dandelion is really hideous. It turns out that you and your team were using association and aggregation the wrong way, after all. All the generated code has to be edited to correct these flaws. Editing this code is extremely difficult because it has been instrumented with ugly comment blocks that have special syntax that Dandelion needs in order to keep the diagrams in sync with the code. If you accidentally alter one of these comments, the diagrams will be regenerated incorrectly. It turns out that "Round the Horn Engineering" requires an awful lot of effort. The more you try to keep the code compatible with Dandelion, the more errors Dandelion generates. In the end, you give up and decide to keep the diagrams up to date manually. A second later, you decide that there's no point in keeping the diagrams up to date at all. Besides, who has time?   Your boss hires a consultant to build tools to count the number of lines of code that are being produced. He puts a big thermometer graph on the wall with the number 1,000,000 on the top. Every day, he extends the red line to show how many lines have been added. Three days after the thermometer appears on the wall, your boss stops you in the hall. "That graph isn't growing quickly enough. We need to have a million lines done by October 1." "We aren't even sh-sh-sure that the proshect will require a m-million linezh," you blather. "We have to have a million lines done by October 1," your boss reiterates. His points have grown again, and the Grecian formula he uses on them creates an aura of authority and competence. "Are you sure your comment blocks are big enough?" Then, in a flash of managerial insight, he says, "I have it! I want you to institute a new policy among the engineers. No line of code is to be longer than 20 characters. Any such line must be split into two or more preferably more. All existing code needs to be reworked to this standard. That'll get our line count up!"   You decide not to tell him that this will require two unscheduled work months. You decide not to tell him anything at all. You decide that intravenous injections of pure ethanol are the only solution. You make the appropriate arrangements. Hack, hack, hack, and hack. You and your team madly code away. By August 1, your boss, frowning at the thermometer on the wall, institutes a mandatory 50-hour workweek.   Hack, hack, hack, and hack. By September 1st, the thermometer is at 1.2 million lines and your boss asks you to write a report describing why you exceeded the coding budget by 20 percent. He institutes mandatory Saturdays and demands that the project be brought back down to a million lines. You start a campaign of remerging lines. Hack, hack, hack, and hack. Tempers are flaring; people are quitting; QA is raining trouble reports down on you. Customers are demanding installation and user manuals; salespeople are demanding advance demonstrations for special customers; the requirements document is still thrashing, the marketing folks are complaining that the product isn't anything like they specified, and the liquor store won't accept your credit card anymore. Something has to give.    On September 15, BB calls a meeting. As he enters the room, his points are emitting clouds of steam. When he speaks, the bass overtones of his carefully manicured voice cause the pit of your stomach to roll over. "The QA manager has told me that this project has less than 50 percent of the required features implemented. He has also informed me that the system crashes all the time, yields wrong results, and is hideously slow. He has also complained that he cannot keep up with the continuous train of daily releases, each more buggy than the last!" He stops for a few seconds, visibly trying to compose himself. "The QA manager estimates that, at this rate of development, we won't be able to ship the product until December!" Actually, you think it's more like March, but you don't say anything. "December!" BB roars with such derision that people duck their heads as though he were pointing an assault rifle at them. "December is absolutely out of the question. Team leaders, I want new estimates on my desk in the morning. I am hereby mandating 65-hour work weeks until this project is complete. And it better be complete by November 1."   As he leaves the conference room, he is heard to mutter: "Empowermentbah!" * * * Your boss is bald; his points are mounted on BB's wall. The fluorescent lights reflecting off his pate momentarily dazzle you. "Do you have anything to drink?" he asks. Having just finished your last bottle of Boone's Farm, you pull a bottle of Thunderbird from your bookshelf and pour it into his coffee mug. "What's it going to take to get this project done? " he asks. "We need to freeze the requirements, analyze them, design them, and then implement them," you say callously. "By November 1?" your boss exclaims incredulously. "No way! Just get back to coding the damned thing." He storms out, scratching his vacant head.   A few days later, you find that your boss has been transferred to the corporate research division. Turnover has skyrocketed. Customers, informed at the last minute that their orders cannot be fulfilled on time, have begun to cancel their orders. Marketing is re-evaluating whether this product aligns with the overall goals of the company. Memos fly, heads roll, policies change, and things are, overall, pretty grim. Finally, by March, after far too many sixty-five hour weeks, a very shaky version of the software is ready. In the field, bug-discovery rates are high, and the technical support staff are at their wits' end, trying to cope with the complaints and demands of the irate customers. Nobody is happy.   In April, BB decides to buy his way out of the problem by licensing a product produced by Rupert Industries and redistributing it. The customers are mollified, the marketing folks are smug, and you are laid off.     Rupert Industries: Project Alpha   Your name is Robert. The date is January 3, 2001. The quiet hours spent with your family this holiday have left you refreshed and ready for work. You are sitting in a conference room with your team of professionals. The manager of the division called the meeting. "We have some ideas for a new project," says the division manager. Call him Russ. He is a high-strung British chap with more energy than a fusion reactor. He is ambitious and driven but understands the value of a team. Russ describes the essence of the new market opportunity the company has identified and introduces you to Jane, the marketing manager, who is responsible for defining the products that will address it. Addressing you, Jane says, "We'd like to start defining our first product offering as soon as possible. When can you and your team meet with me?" You reply, "We'll be done with the current iteration of our project this Friday. We can spare a few hours for you between now and then. After that, we'll take a few people from the team and dedicate them to you. We'll begin hiring their replacements and the new people for your team immediately." "Great," says Russ, "but I want you to understand that it is critical that we have something to exhibit at the trade show coming up this July. If we can't be there with something significant, we'll lose the opportunity."   "I understand," you reply. "I don't yet know what it is that you have in mind, but I'm sure we can have something by July. I just can't tell you what that something will be right now. In any case, you and Jane are going to have complete control over what we developers do, so you can rest assured that by July, you'll have the most important things that can be accomplished in that time ready to exhibit."   Russ nods in satisfaction. He knows how this works. Your team has always kept him advised and allowed him to steer their development. He has the utmost confidence that your team will work on the most important things first and will produce a high-quality product.   * * *   "So, Robert," says Jane at their first meeting, "How does your team feel about being split up?" "We'll miss working with each other," you answer, "but some of us were getting pretty tired of that last project and are looking forward to a change. So, what are you people cooking up?" Jane beams. "You know how much trouble our customers currently have . . ." And she spends a half hour or so describing the problem and possible solution. "OK, wait a second" you respond. "I need to be clear about this." And so you and Jane talk about how this system might work. Some of her ideas aren't fully formed. You suggest possible solutions. She likes some of them. You continue discussing.   During the discussion, as each new topic is addressed, Jane writes user story cards. Each card represents something that the new system has to do. The cards accumulate on the table and are spread out in front of you. Both you and Jane point at them, pick them up, and make notes on them as you discuss the stories. The cards are powerful mnemonic devices that you can use to represent complex ideas that are barely formed.   At the end of the meeting, you say, "OK, I've got a general idea of what you want. I'm going to talk to the team about it. I imagine they'll want to run some experiments with various database structures and presentation formats. Next time we meet, it'll be as a group, and we'll start identifying the most important features of the system."   A week later, your nascent team meets with Jane. They spread the existing user story cards out on the table and begin to get into some of the details of the system. The meeting is very dynamic. Jane presents the stories in the order of their importance. There is much discussion about each one. The developers are concerned about keeping the stories small enough to estimate and test. So they continually ask Jane to split one story into several smaller stories. Jane is concerned that each story have a clear business value and priority, so as she splits them, she makes sure that this stays true.   The stories accumulate on the table. Jane writes them, but the developers make notes on them as needed. Nobody tries to capture everything that is said; the cards are not meant to capture everything but are simply reminders of the conversation.   As the developers become more comfortable with the stories, they begin writing estimates on them. These estimates are crude and budgetary, but they give Jane an idea of what the story will cost.   At the end of the meeting, it is clear that many more stories could be discussed. It is also clear that the most important stories have been addressed and that they represent several months worth of work. Jane closes the meeting by taking the cards with her and promising to have a proposal for the first release in the morning.   * * *   The next morning, you reconvene the meeting. Jane chooses five cards and places them on the table. "According to your estimates, these cards represent about one perfect team-week's worth of work. The last iteration of the previous project managed to get one perfect team-week done in 3 real weeks. If we can get these five stories done in 3 weeks, we'll be able to demonstrate them to Russ. That will make him feel very comfortable about our progress." Jane is pushing it. The sheepish look on her face lets you know that she knows it too. You reply, "Jane, this is a new team, working on a new project. It's a bit presumptuous to expect that our velocity will be the same as the previous team's. However, I met with the team yesterday afternoon, and we all agreed that our initial velocity should, in fact, be set to one perfectweek for every 3 real-weeks. So you've lucked out on this one." "Just remember," you continue, "that the story estimates and the story velocity are very tentative at this point. We'll learn more when we plan the iteration and even more when we implement it."   Jane looks over her glasses at you as if to say "Who's the boss around here, anyway?" and then smiles and says, "Yeah, don't worry. I know the drill by now."Jane then puts 15 more cards on the table. She says, "If we can get all these cards done by the end of March, we can turn the system over to our beta test customers. And we'll get good feedback from them."   You reply, "OK, so we've got our first iteration defined, and we have the stories for the next three iterations after that. These four iterations will make our first release."   "So," says Jane, can you really do these five stories in the next 3 weeks?" "I don't know for sure, Jane," you reply. "Let's break them down into tasks and see what we get."   So Jane, you, and your team spend the next several hours taking each of the five stories that Jane chose for the first iteration and breaking them down into small tasks. The developers quickly realize that some of the tasks can be shared between stories and that other tasks have commonalities that can probably be taken advantage of. It is clear that potential designs are popping into the developers' heads. From time to time, they form little discussion knots and scribble UML diagrams on some cards.   Soon, the whiteboard is filled with the tasks that, once completed, will implement the five stories for this iteration. You start the sign-up process by saying, "OK, let's sign up for these tasks." "I'll take the initial database generation." Says Pete. "That's what I did on the last project, and this doesn't look very different. I estimate it at two of my perfect workdays." "OK, well, then, I'll take the login screen," says Joe. "Aw, darn," says Elaine, the junior member of the team, "I've never done a GUI, and kinda wanted to try that one."   "Ah, the impatience of youth," Joe says sagely, with a wink in your direction. "You can assist me with it, young Jedi." To Jane: "I think it'll take me about three of my perfect workdays."   One by one, the developers sign up for tasks and estimate them in terms of their own perfect workdays. Both you and Jane know that it is best to let the developers volunteer for tasks than to assign the tasks to them. You also know full well that you daren't challenge any of the developers' estimates. You know these people, and you trust them. You know that they are going to do the very best they can.   The developers know that they can't sign up for more perfect workdays than they finished in the last iteration they worked on. Once each developer has filled his or her schedule for the iteration, they stop signing up for tasks.   Eventually, all the developers have stopped signing up for tasks. But, of course, tasks are still left on the board.   "I was worried that that might happen," you say, "OK, there's only one thing to do, Jane. We've got too much to do in this iteration. What stories or tasks can we remove?" Jane sighs. She knows that this is the only option. Working overtime at the beginning of a project is insane, and projects where she's tried it have not fared well.   So Jane starts to remove the least-important functionality. "Well, we really don't need the login screen just yet. We can simply start the system in the logged-in state." "Rats!" cries Elaine. "I really wanted to do that." "Patience, grasshopper." says Joe. "Those who wait for the bees to leave the hive will not have lips too swollen to relish the honey." Elaine looks confused. Everyone looks confused. "So . . .," Jane continues, "I think we can also do away with . . ." And so, bit by bit, the list of tasks shrinks. Developers who lose a task sign up for one of the remaining ones.   The negotiation is not painless. Several times, Jane exhibits obvious frustration and impatience. Once, when tensions are especially high, Elaine volunteers, "I'll work extra hard to make up some of the missing time." You are about to correct her when, fortunately, Joe looks her in the eye and says, "When once you proceed down the dark path, forever will it dominate your destiny."   In the end, an iteration acceptable to Jane is reached. It's not what Jane wanted. Indeed, it is significantly less. But it's something the team feels that can be achieved in the next 3 weeks.   And, after all, it still addresses the most important things that Jane wanted in the iteration. "So, Jane," you say when things had quieted down a bit, "when can we expect acceptance tests from you?" Jane sighs. This is the other side of the coin. For every story the development team implements,   Jane must supply a suite of acceptance tests that prove that it works. And the team needs these long before the end of the iteration, since they will certainly point out differences in the way Jane and the developers imagine the system's behaviour.   "I'll get you some example test scripts today," Jane promises. "I'll add to them every day after that. You'll have the entire suite by the middle of the iteration."   * * *   The iteration begins on Monday morning with a flurry of Class, Responsibilities, Collaborators sessions. By midmorning, all the developers have assembled into pairs and are rapidly coding away. "And now, my young apprentice," Joe says to Elaine, "you shall learn the mysteries of test-first design!"   "Wow, that sounds pretty rad," Elaine replies. "How do you do it?" Joe beams. It's clear that he has been anticipating this moment. "OK, what does the code do right now?" "Huh?" replied Elaine, "It doesn't do anything at all; there is no code."   "So, consider our task; can you think of something the code should do?" "Sure," Elaine said with youthful assurance, "First, it should connect to the database." "And thereupon, what must needs be required to connecteth the database?" "You sure talk weird," laughed Elaine. "I think we'd have to get the database object from some registry and call the Connect() method. "Ah, astute young wizard. Thou perceives correctly that we requireth an object within which we can cacheth the database object." "Is 'cacheth' really a word?" "It is when I say it! So, what test can we write that we know the database registry should pass?" Elaine sighs. She knows she'll just have to play along. "We should be able to create a database object and pass it to the registry in a Store() method. And then we should be able to pull it out of the registry with a Get() method and make sure it's the same object." "Oh, well said, my prepubescent sprite!" "Hay!" "So, now, let's write a test function that proves your case." "But shouldn't we write the database object and registry object first?" "Ah, you've much to learn, my young impatient one. Just write the test first." "But it won't even compile!" "Are you sure? What if it did?" "Uh . . ." "Just write the test, Elaine. Trust me." And so Joe, Elaine, and all the other developers began to code their tasks, one test case at a time. The room in which they worked was abuzz with the conversations between the pairs. The murmur was punctuated by an occasional high five when a pair managed to finish a task or a difficult test case.   As development proceeded, the developers changed partners once or twice a day. Each developer got to see what all the others were doing, and so knowledge of the code spread generally throughout the team.   Whenever a pair finished something significant whether a whole task or simply an important part of a task they integrated what they had with the rest of the system. Thus, the code base grew daily, and integration difficulties were minimized.   The developers communicated with Jane on a daily basis. They'd go to her whenever they had a question about the functionality of the system or the interpretation of an acceptance test case.   Jane, good as her word, supplied the team with a steady stream of acceptance test scripts. The team read these carefully and thereby gained a much better understanding of what Jane expected the system to do. By the beginning of the second week, there was enough functionality to demonstrate to Jane. She watched eagerly as the demonstration passed test case after test case. "This is really cool," Jane said as the demonstration finally ended. "But this doesn't seem like one-third of the tasks. Is your velocity slower than anticipated?"   You grimace. You'd been waiting for a good time to mention this to Jane but now she was forcing the issue. "Yes, unfortunately, we are going more slowly than we had expected. The new application server we are using is turning out to be a pain to configure. Also, it takes forever to reboot, and we have to reboot it whenever we make even the slightest change to its configuration."   Jane eyes you with suspicion. The stress of last Monday's negotiations had still not entirely dissipated. She says, "And what does this mean to our schedule? We can't slip it again, we just can't. Russ will have a fit! He'll haul us all into the woodshed and ream us some new ones."   You look Jane right in the eyes. There's no pleasant way to give someone news like this. So you just blurt out, "Look, if things keep going like they're going, we're not going to be done with everything by next Friday. Now it's possible that we'll figure out a way to go faster. But, frankly, I wouldn't depend on that. You should start thinking about one or two tasks that could be removed from the iteration without ruining the demonstration for Russ. Come hell or high water, we are going to give that demonstration on Friday, and I don't think you want us to choose which tasks to omit."   "Aw forchrisakes!" Jane barely manages to stifle yelling that last word as she stalks away, shaking her head. Not for the first time, you say to yourself, "Nobody ever promised me project management would be easy." You are pretty sure it won't be the last time, either.   Actually, things went a bit better than you had hoped. The team did, in fact, have to drop one task from the iteration, but Jane had chosen wisely, and the demonstration for Russ went without a hitch. Russ was not impressed with the progress, but neither was he dismayed. He simply said, "This is pretty good. But remember, we have to be able to demonstrate this system at the trade show in July, and at this rate, it doesn't look like you'll have all that much to show." Jane, whose attitude had improved dramatically with the completion of the iteration, responded to Russ by saying, "Russ, this team is working hard, and well. When July comes around, I am confident that we'll have something significant to demonstrate. It won't be everything, and some of it may be smoke and mirrors, but we'll have something."   Painful though the last iteration was, it had calibrated your velocity numbers. The next iteration went much better. Not because your team got more done than in the last iteration but simply because the team didn't have to remove any tasks or stories in the middle of the iteration.   By the start of the fourth iteration, a natural rhythm has been established. Jane, you, and the team know exactly what to expect from one another. The team is running hard, but the pace is sustainable. You are confident that the team can keep up this pace for a year or more.   The number of surprises in the schedule diminishes to near zero; however, the number of surprises in the requirements does not. Jane and Russ frequently look over the growing system and make recommendations or changes to the existing functionality. But all parties realize that these changes take time and must be scheduled. So the changes do not cause anyone's expectations to be violated. In March, there is a major demonstration of the system to the board of directors. The system is very limited and is not yet in a form good enough to take to the trade show, but progress is steady, and the board is reasonably impressed.   The second release goes even more smoothly than the first. By now, the team has figured out a way to automate Jane's acceptance test scripts. The team has also refactored the design of the system to the point that it is really easy to add new features and change old ones. The second release was done by the end of June and was taken to the trade show. It had less in it than Jane and Russ would have liked, but it did demonstrate the most important features of the system. Although customers at the trade show noticed that certain features were missing, they were very impressed overall. You, Russ, and Jane all returned from the trade show with smiles on your faces. You all felt as though this project was a winner.   Indeed, many months later, you are contacted by Rufus Inc. That company had been working on a system like this for its internal operations. Rufus has canceled the development of that system after a death-march project and is negotiating to license your technology for its environment.   Indeed, things are looking up!

    Read the article

  • Nginx + Nagios : 502 Bad gateway

    - by MrROY
    I have a fully new install nagios, but I can't access to it. Here's my Nginx config: server{ listen 80; server_name 61.148.45.10; # blahblah # Nagios Monitoring location /nagios3/ { proxy_pass http://127.0.0.1:80; } } Nagios is installed step by step(From this Linode guide): sudo apt-get install -y nagios3 Then I try to visit http://ip-address/nagios3/, but it shows 502 bad gateway. How do I deal with this ? This is my /var/log/syslog: Oct 25 14:18:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;SOFT;1;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:19:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;SOFT;1;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:19:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;SOFT;2;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:20:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;SOFT;2;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:20:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;SOFT;3;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:21:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;SOFT;3;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:21:17 my-server nagios3: SERVICE ALERT: localhost;Disk Space;WARNING;HARD;4;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:21:17 my-server nagios3: SERVICE NOTIFICATION: root;localhost;Disk Space;WARNING;notify-service-by-email;DISK WARNING - free space: /boot 43 MB (20% inode=99%): Oct 25 14:21:17 my-server postfix/pickup[24474]: 4F89F394034C: uid=109 from=<nagios> Oct 25 14:21:17 my-server postfix/cleanup[27756]: 4F89F394034C: message-id=<20131025062117.4F89F394034C@my-server> Oct 25 14:21:17 my-server postfix/qmgr[24475]: 4F89F394034C: from=<nagios@[email protected]>, size=594, nrcpt=1 (queue active) Oct 25 14:21:17 my-server postfix/local[27758]: 4F89F394034C: to=<root@localhost>, relay=local, delay=0.15, delays=0.11/0/0/0.04, dsn=2.0.0, status=sent (delivered to mailbox) Oct 25 14:21:17 my-server postfix/qmgr[24475]: 4F89F394034C: removed Oct 25 14:22:07 my-server nagios3: SERVICE ALERT: localhost;HTTP;WARNING;HARD;4;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:22:07 my-server nagios3: SERVICE NOTIFICATION: root;localhost;HTTP;WARNING;notify-service-by-email;HTTP WARNING: HTTP/1.1 403 Forbidden - 319 bytes in 0.000 second response time Oct 25 14:22:07 my-server postfix/pickup[24474]: 219CA3940381: uid=109 from=<nagios> Oct 25 14:22:07 my-server postfix/cleanup[27756]: 219CA3940381: message-id=<20131025062207.219CA3940381@my-server> Oct 25 14:22:07 my-server postfix/qmgr[24475]: 219CA3940381: from=<nagios@[email protected]>, size=605, nrcpt=1 (queue active) Oct 25 14:22:07 my-server postfix/local[27758]: 219CA3940381: to=<root@localhost>, relay=local, delay=0.12, delays=0.07/0/0/0.05, dsn=2.0.0, status=sent (delivered to mailbox) Oct 25 14:22:07 my-server postfix/qmgr[24475]: 219CA3940381: removed Oct 25 14:39:01 my-server CRON[28242]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) And there're lot of 127.0.0.1 visit in nginx log, but I actually visit from a external ip: 127.0.0.1 - - [25/Oct/2013:14:21:02 +0800] "GET /nagios3/ HTTP/1.0" 502 575 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/3 0.0.1599.69 Safari/537.36" 127.0.0.1 - - [25/Oct/2013:14:21:02 +0800] "GET /nagios3/ HTTP/1.0" 502 575 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/3 0.0.1599.69 Safari/537.36" 127.0.0.1 - - [25/Oct/2013:14:21:02 +0800] "GET /nagios3/ HTTP/1.0" 502 575 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_8_5) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/3 0.0.1599.69 Safari/537.36"

    Read the article

  • Can't get MySQL to install

    - by James Marthenal
    I'd like to think I know what I'm doing in a Unix shell but maybe not. I made a mistake in a configuration file for MySQL, so I decided to just uninstall it and then reinstall it, so I did: sudo apt-get --purge remove mysql-server mysql-server-5.0 mysql-client The files were deleted, so I then tried to install it, but it didn't ask me for a root password or anything else, so I uninstalled it using the above command again and then did sudo rm -rf /etc/mysql sudo rm /etc/init.d/mysql sudo rm -rf /var/lib/mysql* I then restarted the computer then installed it again: sudo apt-get install mysql-server mysql-client It asked for a root password, and everything looked like it would work, until I saw this: $ sudo apt-get install mysql-server mysql-client Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: mysql-server-5.0 Suggested packages: tinyca The following NEW packages will be installed: mysql-client mysql-server mysql-server-5.0 0 upgraded, 3 newly installed, 0 to remove and 1 not upgraded. Need to get 0B/27.4MB of archives. After this operation, 86.7MB of additional disk space will be used. Do you want to continue [Y/n]? y WARNING: The following packages cannot be authenticated! mysql-server-5.0 mysql-client mysql-server Authentication warning overridden. Preconfiguring packages ... Can't exec "/tmp/mysql-server-5.0.config.28101": Permission denied at /usr/share/perl/5.10/IPC/Open3.pm line 168. open2: exec of /tmp/mysql-server-5.0.config.28101 configure failed at /usr/share/perl5/Debconf/ConfModule.pm line 59 mysql-server-5.0 failed to preconfigure, with exit status 255 Selecting previously deselected package mysql-server-5.0. (Reading database ... 160284 files and directories currently installed.) Unpacking mysql-server-5.0 (from .../mysql-server-5.0_5.0.51a-24+lenny5_amd64.deb) ... Selecting previously deselected package mysql-client. Unpacking mysql-client (from .../mysql-client_5.0.51a-24+lenny5_all.deb) ... Selecting previously deselected package mysql-server. Unpacking mysql-server (from .../mysql-server_5.0.51a-24+lenny5_all.deb) ... Processing triggers for man-db ... Setting up mysql-server-5.0 (5.0.51a-24+lenny5) ... Stopping MySQL database server: mysqld. /var/lib/dpkg/info/mysql-server-5.0.postinst: line 144: /etc/mysql/conf.d/old_passwords.cnf: No such file or directory dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1 Setting up mysql-client (5.0.51a-24+lenny5) ... dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.0; however: Package mysql-server-5.0 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: mysql-server-5.0 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) Now I can't seem to figure out what to do. I just want to get a clean MySQL installation at this point. I'm running the latest stable release of Debian. All help is appreciated—thanks! Edit: I looked at this similar question, which suggests that I uninstall mysql-common, but when I try to do so I see: The following packages will be REMOVED: apache2 apache2-mpm-prefork apache2-utils apache2.2-common git-svn libapache2-mod-php5 libapache2-mod-python libapache2-svn libaprutil1 libdbd-mysql-perl libdbd-mysql-rubygem libmysql-ruby libmysql-ruby1.8 libmysql-rubygem libmysqlclient15-dev libmysqlclient15off librdf-perl librdf0 libserf-0-0 libsvn-perl libsvn1 mysql-client-5.0 mysql-common mytop ndn-apache22-php5 ndn-apache22-svn ndn-interpreters ndn-lighttpd ndn-netsaint-plugins ndn-perl-modules ndn-php5-cgi ndn-php5-xcache ndn-php53 ndn-php53-suhosin ndn-rubygems php5 php5-mcrypt php5-mysql proftpd proftpd-mod-mysql python-django python-mysqldb python-subversion python-svn subversion subversion-tools trac zendoptimizer 0 upgraded, 0 newly installed, 48 to remove and 1 not upgraded. Eeek! Any suggestions?

    Read the article

  • SSH X11 not working

    - by azat
    I have a home and work computer, the home computer has a static IP address. If I ssh from my work computer to my home computer, the ssh connection works but X11 applications are not displayed. In my /etc/ssh/sshd_config at home: X11Forwarding yes X11DisplayOffset 10 X11UseLocalhost yes At work I have tried the following commands: xhost + home HOME_IP ssh -X home ssh -X HOME_IP ssh -Y home ssh -Y HOME_IP My /etc/ssh/ssh_config at work: Host * ForwardX11 yes ForwardX11Trusted yes My ~/.ssh/config at work: Host home HostName HOME_IP User azat PreferredAuthentications password ForwardX11 yes My ~/.Xauthority at work: -rw------- 1 azat azat 269 Jun 7 11:25 .Xauthority My ~/.Xauthority at home: -rw------- 1 azat azat 246 Jun 7 19:03 .Xauthority But it doesn't work After I make an ssh connection to home: $ echo $DISPLAY localhost:10.0 $ kate X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. X11 connection rejected because of wrong authentication. kate: cannot connect to X server localhost:10.0 I use iptables at home, but I've allowed port 22. According to what I've read that's all I need. UPD. With -vvv ... debug2: callback start debug2: x11_get_proto: /usr/bin/xauth list :0 2/dev/null debug1: Requesting X11 forwarding with authentication spoofing. debug2: channel 1: request x11-req confirm 1 debug2: client_session2_setup: id 1 debug2: fd 3 setting TCP_NODELAY debug2: channel 1: request pty-req confirm 1 ... When try to launch kate: debug1: client_input_channel_open: ctype x11 rchan 2 win 65536 max 16384 debug1: client_request_x11: request from 127.0.0.1 55486 debug2: fd 8 setting O_NONBLOCK debug3: fd 8 is O_NONBLOCK debug1: channel 2: new [x11] debug1: confirm x11 debug2: X11 connection uses different authentication protocol. X11 connection rejected because of wrong authentication. debug2: X11 rejected 2 i0/o0 debug2: channel 2: read failed debug2: channel 2: close_read debug2: channel 2: input open - drain debug2: channel 2: ibuf empty debug2: channel 2: send eof debug2: channel 2: input drain - closed debug2: channel 2: write failed debug2: channel 2: close_write debug2: channel 2: output open - closed debug2: X11 closed 2 i3/o3 debug2: channel 2: send close debug2: channel 2: rcvd close debug2: channel 2: is dead debug2: channel 2: garbage collecting debug1: channel 2: free: x11, nchannels 3 debug3: channel 2: status: The following connections are open: #1 client-session (t4 r0 i0/0 o0/0 fd 5/6 cc -1) #2 x11 (t7 r2 i3/0 o3/0 fd 8/8 cc -1) # The same as above repeate about 7 times kate: cannot connect to X server localhost:10.0 UPD2 Please provide your Linux distribution & version number. Are you using a default GNOME or KDE environment for X or something else you customized yourself? azat:~$ kded4 -version Qt: 4.7.4 KDE Development Platform: 4.6.5 (4.6.5) KDE Daemon: $Id$ Are you invoking ssh directly on a command line from a terminal window? What terminal are you using? xterm, gnome-terminal, or? How did you start the terminal running in the X environment? From a menu? Hotkey? or ? From terminal emulator `yakuake` Manualy press `Ctrl + N` and write commands Can you run xeyes from the same terminal window where the ssh -X fails? `xeyes` - is not installed But `kate` or another kde app is running Are you invoking the ssh command as the same user that you're logged into the X session as? From the same user UPD3 I also download ssh sources, and using debug2() write why it's report that version is different It see some cookies, and one of them is empty, another is MIT-MAGIC-COOKIE-1

    Read the article

  • nginx proxying websockets, must be missing something

    - by CodeMonkey
    I have a basic chat app written in node.js using express and socket.io; it works fine when connecting directly to node on port 3000 But doesn't work when I try to use nginx v1.4.2 as a proxy. I start off using the connection map map $http_upgrade $connection_upgrade { default upgrade; '' close; } Then add the locations location /socket.io/ { proxy_pass http://node; proxy_redirect off; proxy_http_version 1.1; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $remote_addr; proxy_set_header X-Request-Id $txid; proxy_set_header X-Session-Id $uid_set+$uid_got; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection $connection_upgrade; proxy_buffering off; proxy_read_timeout 86400; keepalive_timeout 90; proxy_cache off; access_log /var/log/nginx/webservice.access.log; error_log /var/log/nginx/webservice.error.log; } location /web-service/ { proxy_pass http://node; proxy_redirect off; proxy_http_version 1.1; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $remote_addr; proxy_set_header X-Request-Id $txid; proxy_set_header X-Session-Id $uid_set+$uid_got; proxy_set_header Upgrade $http_upgrade; proxy_set_header Connection $connection_upgrade; proxy_buffering off; proxy_read_timeout 86400; keepalive_timeout 90; access_log /var/log/nginx/webservice.access.log; error_log /var/log/nginx/webservice.error.log; rewrite /web-service/(.*) /$1 break; proxy_cache off; } These are built up using all of the tips to get it working that I could find. The error log does not show any errors. (except when I stop node to test the error logging is working) When through nginx I do see a websocket connection in the dev tools, with the status of 101; but the frames tab under the resuects is empty. The only differnece I can see in the response headers is a case difference - "upgrade" vs "Upgrade" - through nginx : Connection:upgrade Date:Fri, 08 Nov 2013 11:49:25 GMT Sec-WebSocket-Accept:LGB+iEBb8Ql9zYfqNfuuXzdzjgg= Server:nginx/1.4.2 Upgrade:websocket direct from node Connection:Upgrade Sec-WebSocket-Accept:8nwPpvg+4wKMOyQBEvxWXutd8YY= Upgrade:websocket output from node (when used through nginx) debug - served static content /socket.io.js debug - client authorized info - handshake authorized iaej2VQlsbLFIhachyb1 debug - setting request GET /socket.io/1/websocket/iaej2VQlsbLFIhachyb1 debug - set heartbeat interval for client iaej2VQlsbLFIhachyb1 debug - client authorized for debug - websocket writing 1:: debug - websocket writing 5:::{"name":"message","args":[{"message":"welcome to the chat"}]} debug - clearing poll timeout debug - jsonppolling writing io.j[0]("8::"); debug - set close timeout for client 7My3F4CuvZC0I4Olhybz debug - jsonppolling closed due to exceeded duration debug - clearing poll timeout debug - jsonppolling writing io.j[0]("8::"); debug - set close timeout for client AkCYl0nWNZAHeyUihyb0 debug - jsonppolling closed due to exceeded duration debug - setting request GET /socket.io/1/xhr-polling/iaej2VQlsbLFIhachyb1?t=1383911206158 debug - setting poll timeout debug - discarding transport debug - cleared heartbeat interval for client iaej2VQlsbLFIhachyb1 debug - setting request GET /socket.io/1/jsonp-polling/iaej2VQlsbLFIhachyb1?t=1383911216160&i=0 debug - setting poll timeout debug - discarding transport debug - clearing poll timeout debug - clearing poll timeout debug - jsonppolling writing io.j[0]("8::"); debug - set close timeout for client iaej2VQlsbLFIhachyb1 debug - jsonppolling closed due to exceeded duration debug - setting request GET /socket.io/1/jsonp-polling/iaej2VQlsbLFIhachyb1?t=1383911236429&i=0 debug - setting poll timeout debug - discarding transport debug - cleared close timeout for client iaej2VQlsbLFIhachyb1 when direct to node, the client does not start polling. The normal http stuff node outputs works fine with nginx. Clearly something I am not seeing, but I am stuck, thanks :)

    Read the article

< Previous Page | 299 300 301 302 303 304 305 306 307 308 309 310  | Next Page >