Search Results

Search found 8298 results on 332 pages for 'laptop'.

Page 304/332 | < Previous Page | 300 301 302 303 304 305 306 307 308 309 310 311  | Next Page >

• Ubuntu 12.04 suddenly cannot connect to WPA2/WPA Personal protected connection. Windows 7 can

  - by d4ryl3

  I have a laptop with Windows 7 and Ubuntu 12.04. I have a Cisco E1200 and when I set it up, it created 2 SSIDs. Let's name them: MyConnection (WPA/WPA2 personal), and MyConnection-Guest (no authentication, guest password entered via web browser). I had no problem connecting to MyConnection before, either in Windows 7 and Ubuntu. But now, I can't access MyConnection on Ubuntu. It just says "connecting..." then disconnects after a while. But I'm able to access the internet (on Ubuntu) when I connect to MyConnection-Guest. MAC filtering is off (even if it's on its MAC address is in the white list). Any idea why I'm unable to connect to MyConnection in Ubuntu? Thanks. Update: My Ubuntu installation can connect to ANY WiFi connection (WPA/WEP/no auth), except for MyConnection. Update2: This is what "The not so easy way" returned: Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver 'default' ctrl_interface 'N/A' bridge 'N/A' Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf' Reading configuration file '/etc/wpa_supplicant.conf' Priority group 0 id=0 ssid='MyConnection' id=1 ssid='MyConnection' id=2 ssid='MyConnection' id=3 ssid='MyConnection' WEXT: cfg80211-based driver detected SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf capabilities: key_mgmt 0xf enc 0xf flags 0x0 netlink: Operstate: linkmode=1, operstate=5 Own MAC address: xx:xx:xx:xx:xx:xx wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 wpa_driver_wext_set_key: alg=0 key_idx=4 set_tx=0 seq_len=0 key_len=0 ioctl[SIOCSIWENCODEEXT]: Invalid argument Driver did not support SIOCSIWENCODEEXT wpa_driver_wext_set_key: alg=0 key_idx=5 set_tx=0 seq_len=0 key_len=0 ioctl[SIOCSIWENCODEEXT]: Invalid argument Driver did not support SIOCSIWENCODEEXT wpa_driver_wext_set_countermeasures RSN: flushing PMKID list in the driver Setting scan request: 0 sec 100000 usec WPS: UUID based on MAC address - hexdump(len=16): 16 3b d8 47 9e 24 50 89 96 16 6d 66 35 f3 58 37 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: Supplicant port status: Unauthorized EAPOL: KEY_RX entering state NO_KEY_RECEIVE EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: Supplicant port status: Unauthorized EAPOL: Supplicant port status: Unauthorized Added interface eth1

  Read the article

• How to figure out what VirtualBox did?

  - by AndrejaKo

  I'm trying to boot a custom made-in-ASM OS on my recent laptop. The OS is intended to be installed on a floppy and during make creates a bootable floppy. Since I don't have a floppy drive, I installed it on a virtual floppy. After that I used WinToFlash's create bootable MS-DOS USB drive option to transfer the floppy image to an USB flash drive. Then I tried to boot my computer from it but got only a repeating broken string on screen. After all that I made a virtual hard disk image form the flash drive using this tutorial and tried to boot a virtual machine from it. First time I got same problem as on real computer. I then used the reset option and next time and every time after that OS booted correctly. My question is: How do I figure out what exactly happened to the virtual machine between first and second boot? UPDATE I just created a new VM with default settings for windows XP and it has the same problem that I have on a real computer. I was unable to reproduce the procedure which made the first VM work correctly.

  Read the article

• How to troubleshoot when one has no idea where to start?

  - by Chris Walton

  I am looking for hints, tips and answers on how to get started on troubleshooting when: The problem is intermittent The problem could lie literally anywhere - operating system; free source software; my own software developments; purchased software; crumbs on the keyboard; the specific combination of software I am currently running; Maxwell's demon; the little blue men actually running the machine have gone on strike; etc. I have expertise only in a few of the areas that are potential candidates for the cause of the problem. The specific problem I am having is detailed below as an example, but I am not seeking answers to my current problem, but rather where and how to start on tackling such problems. I am currently encountering a problem with my new machine. On a few occasions the machine has just frozen; not accepting keystrokes, mouseclicks, or anything except the power on/off switch. Invariably I have been merely browsing the web; I have had a few (<= 6 other applications) running. None of these applications are major; and represent a mix of commercial programs and open source programs, typically migrated from Unix of some variety. My machine is a Windows 7 I7 quad core laptop.

  Read the article

• Why would my wireless cut in and out every minute or so?

  - by Strilanc

  I've been having problems with my wireless. I moved to a new apartment, and the wireless seems incredibly unreliable. Sometimes it will be stable for hours until, all of a sudden, it starts cutting in and out. I'll get 30-90 seconds of normal behavior, then 5-30 seconds of nothing, then repeat. Sometimes the connection will stop working entirely, until I power-cycle the router. It is extremely, extremely annoying. Surfing the web isn't too bad, assuming you can stand the random 5-30 second waits. But some connections are sensitive enough to timeout, and it certainly makes multiplayer games unplayable. Facts: I confirmed the problem using ping google.com -t. I get normal traffic, interspersed with bursts of "Request timed out.". I've never had this problem before with this laptop. I didn't bring my own router or modem to the apartment. I'm using what the old tenant had. Hooking directly to the modem via an ethernet cable results in a stable connection. Temporarily cutting power to the router sometimes fixes the problem. Sometimes it doesn't. I reset the router, but the problem remained. Apparently the previous tenant had issues with the internet, but I don't know what they were specifically. The router is a D-Link DIR-615, and their tech support is useless.

  Read the article

• Dell XPS 15 L502X hard drive Partition

  - by Mohan Gajula

  I have a situation here. I got my new Dell XPS 15 Laptop. The configuration of hard drive is as below : Volume 1: (OEM Partition): 133MB Volume 2: OS (C:): 685.25 GB Volume 3: Recovery : 13.25 GB Now, I am trying to re-partition my C Drive to have a C: drive with 100 GB and a new drive with 585 GB. Earlier, I tried using the Windows 7 Disk Management to shrink and extend the volume. That lead to the OS and hard drive not working. Dell Tech support tried to fix the issue, but they were not able to fix the issue online. Later a Dell Technician arrived my place, and replaced the hard drive with a new hard drive. Please help me re-partition the C: Drive with 100 GB, and new D drive with 585 GB. I don't want to lose my Recovery Partition. SOLUTION As Suggested by KCotreau below , I have done exactly. I have resized the C drive to 100 GB. And then applied the changes. Windows got restarted. On the boot screen, the partition was taking place. It took around 30 mins ( approx. ). Once after restart, I can see my C drive is 100 GB. Now opened the Easeus again. And created a new partition for the free space ( 585 GB ) this took 10 seconds to create. Here goes the screenshot after partitioning. Thanks to KCotreau. You are amazing.

  Read the article

• Win7 VM @ ESXi Server @ VMWorkstation (Win7) - ping works only from VM -> HostOS, not vice versa

  - by DK2000

  right now I'm toying around with VM Ware stuff and not having any pcs then my laptop I decided to run an ESXi Server inside of VWmware Workstation. I was just curios to see if the server would allow to setup and run a VM. And after some tweaking there it was, working like a charm. Okay not that fast but startin' the VM from vSphere and "opening a console" gave my direct access to that VM. Now I wanted to see if I could ping the host from the VM (VM Workstation Network is set to "host only"). And it worked, at least from the VM I could ping the ESXi server and the host. From the host I am able to ping the ESXi Server but I can't ping the VM! I asked myself anyway where the VM got its ip adress from. At the DCHPs IP there is at no machine after all. I even tried to use that DHCP adress for my Host and it didn't work out. You can see my settings from the screenshot here (it's pretty wide so just a link): http://yfrog.com/n4desktopfeop The only thing that got me thinking was when I once changed the ESXi's IP from 192.168.92.137 to 192.168.0.137. I still was able to connect to the ESXi server via its new IP but when I tried to run the VM console from vSphere I got an error after a while that said "couldnt connect to 192.168.92.137:903". So vSphere connects just through a port of the ESXi server to the VM?!? Could I setup a Linux VM to use it as a DHCP that I'd at least have control over the IPs that are given. Which lowest end linux could be used for this purpose?!? Thank you for your time! :)

  Read the article

• My .htaccess file re-directed problems?

  - by Glenn Curtis

  I am hoping you can help me! Below is my .htaccess files for my Apache server running on top of Ubuntu server. This is my local server which I installed so I can develop my site on this instead of using my live site! However i have all my files and the database on my localhost now but each time I access my server, vaio-server (its a sony laptop), it just takes me to my live site! Now eveything is in the root of Apache, /var/www - its the only site I will develop on this system so I don't need to config this to look at any many than this one site! I think thats all, all the Apache files, site-available/default ect are as standard. - Please Help!! Many Thanks Glenn Curtis. DirectoryIndex index.php index.html # Upload sizes php_value upload_max_filesize 25M php_value post_max_size 25M # Avoid folder listings Options -Indexes <IfModule mod_rewrite.c> Options +FollowSymlinks RewriteEngine on RewriteBase / # Maintenance #RewriteCond %{REQUEST_URI} !/maintenance.html$ #RewriteRule $ /maintenance.html [R=302,L] #Redirects to www #RewriteCond %{HTTP_HOST} !^vaio-server [NC] #RewriteCond %{HTTPS}s ^on(s)|off #RewriteRule ^(.*)$ glenns-showcase.net/$1 [R=301,QSA,L] #Empty string RewriteRule ^$ app/webroot/ [L] RewriteRule (.*) app/webroot/$1 [L] </IfModule>

  Read the article

• Controller Error: Do I need to worry?

  - by Kryten

  I have a HP Pavillion dv5224ea Laptop with Windows 7 on it. Recently I discovered a Error in Event Viewer: The driver detected a controller error on \Device\Ide\IdePort1. (more details): - System - Provider [ Name] atapi - EventID 11 [ Qualifiers] 49156 Level 2 Task 0 Keywords 0x80000000000000 - TimeCreated [ SystemTime] 2010-03-07T12:43:07.090197600Z EventRecordID 30198 Channel System Computer Alistair-Win7 Security - EventData \Device\Ide\IdePort1 0000100001000000000000000B0004C002000000850100C00000000000000000000000000000000000000000000000000000000004100000 -------------------------------------------------------------------------------- Binary data: In Words 0000: 00100000 00000001 00000000 C004000B 0008: 00000002 C0000185 00000000 00000000 0010: 00000000 00000000 00000000 00000000 0018: 00000000 00001004 In Bytes 0000: 00 00 10 00 01 00 00 00 ........ 0008: 00 00 00 00 0B 00 04 C0 .......À 0010: 02 00 00 00 85 01 00 C0 ......À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ 0028: 00 00 00 00 00 00 00 00 ........ 0030: 00 00 00 00 04 10 00 00 ........ Event Viewer is recording A LOT of these errors (sometimes 13, one after the other!). Do I need to worry? What does this error mean? What device could "\Device\Ide\IdePort1" be? What is a ATAPI Error? Do I need to re-install Windows? I generally find the occurs when I try to backup my machine (using Windows Backup) or when using a program that uses Volume Shadow Copy. I have run "sfc", no problems. There are no Device Errors in Device Manager. I have also run "vssadmin list writers", no problems. Whats going on??? Would it be a good idea to re-install Windows 7?

  Read the article

• Network access lags for Win7 when server network utilization is high

  - by Jeff Miles

  We have a Dell PE2950 file server running Windows 2008, hosting a DFS namespace of ~1.2 TB. This server has two Broadcom 1Gbps NICs teamed together. When there is high traffic going to the server across the network (greater than 200 Mbps), any Windows 7 client accessing a DFS share at the time experiences severe performance problems. For example: Computer A has an AutoCAD drawing opened directly from the DFS share. Performance is normal, not causing any issues. Computer B begins a file transfer, putting a 11GB file onto a different DFS namespace, on the same server Computer A immediately notices lag while using AutoCAD. The cursor momentarily freezes within AutoCAD every 10 seconds or so, and any browsing of the DFS share is extremely slow. Computer B completes file transfer, and performance resumes to normal for Computer A. This is only affecting Windows 7 clients, using a variety of hardware (desktop + laptop). All of our Windows XP clients see no performance impact during the file transfer. Things I have tried with no change: Had Computer A work from an entirely different RAID array from the file transfer destination Updated NIC drivers on clients and server Enabled TCP offload and receive side scaling on the server NIC (previously disabled when the issue began) Antivirus disabled during file transfer I am currently having a user test applications other than AutoCAD when the file transfer occurs, and will update the question with that result. Does anyone have any recommendations for resolution or additional troubleshooting steps?

  Read the article

• MySQL partition "full"?

  - by gdea73

  I have a server that runs Debian 6.2, with Apache, PHP5, and MySQL. Well, I hadn't done anything with MySQL at all so far, just Apache and PHP; I must have installed it (mysql-server) at some point along the line, and I decided to login to the database for the first time a couple days ago as I was considering using the database for a future website project. I noticed that the "root" user had a password, and I didn't recall having set one. My usual root password was incorrect. So I attempted to reset the password. sudo service mysql stop (stopped successfully) sudo /usr/bin/mysqld_safe --skip-grant-tables --skip-networking & started successfully, from what I can tell. However, mysql itself returns "Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld,sock' (2)", and additionally sudo service mysql start returns "/etc/init.d/mysql: ERROR: The partition with /var/lib/mysql is too full! ... failed!" df -h tells me that / is 26% used, a 20GB partition, and /home, roughly 900GB, has only 5% usage. On a potentially related note, I've been experiencing random hangs since I noticed this problem, my tty2 randomly froze several times while idle, and the entire system is suddenly unstable. gnome-terminal also does not open. (Gnome-terminal apparently works now, disregard that part, but the server is still being somewhat unstable, I randomly lost connection when I was SSHed into it from my laptop, twice now.)

  Read the article

• iMac 20inch (Mid 2007) SL DVD Boot Prohibitory Sign

  - by Caitlann Lloyd

  iMac 20inch (Mid 2007 Build) with Ubuntu 12.0.4 How I got in this situation I had a perfectly healthy Intel iMac running Snow Leopard several months ago. Then I got the dreaded spinning gear and several kernel panics. After getting a little frustrated (failing to find a solution online), I found an old macbook installation disk and used it to access Disk Utility. From here, I erased my entire hard drive leaving me with no OS. I then created a Ubuntu DVD and installed Ubuntu onto the system. Now, on Ubuntu, I wine installed Transmac and burned a Single layer copy (with languages, etc. removed to save space) of Snow Leopard onto a 4.7GB DVD. I tried to boot from it and was met with first the grey apple screen and a spinning cog before the grey apple shortly turned into the infamous prohibitory sign. Note: I met this problem previously when using Disk Utility to create a bootable USB of Snow Leopard, hence I severely doubt it has anything to do with the DVD created. Resources at my disposal 1 x iMac running Ubuntu 6 x 4.7GB DVDs 1 x USB Stick 12GB 1 x Windows 7 Laptop Resources I do not have Firewire cables Access to a prebuilt retail disk (Misplaced) Access to another Mac Apple Warranty I would be hugely grateful if someone was able to tell me how to install Snow Leopard again.

  Read the article

• Are there any tests I can run on a network to simulate 100 heavy network users?

  - by marc.gayle

  I will be hosting a Ruby on Rails workshop at a small hotel in the near future, and while they have 'Wifi' everywhere on the property, and the property normally hosts 150 - 300 people, I am not 100% confident that they have hosted 150 tech people that tend to have heavy web surfing habits/needs. Their tech department is also 1 or 2 guys. Are there any automated tests I can download and run from my laptop, on the network, that would simulate 100 'heavy users' on the network at the same time? Their broadband pipe is a 15mbps cable connection. Would that suffice for the general surfing needs of 100 - 150 techies? I know all it takes is 1 or 2 bit torrenters to kill the entire network, but assuming we can at the very least block those ports or encourage the attendees not to file share on the network, would that speed suffice for general surfing needs? What are good resources online that would allow me to quickly get up to speed on the IT related issues, so that I can ask their sysadmins the right questions? Edit: Note that I am fairly technical, so assume I can get up to speed quickly even with technical manuals, etc.

  Read the article

• What's the best way to completely remove everything from a computer, without re-installing?

  - by Connor W

  I have a friend who wants to sell their computer, but obviously all personal information and software that it is on it needs to be removed before doing so. Usually I would format and reinstall it, but I cannot easily get hold of the required XP DVDs and I'm not 100% sure the serial number is stuck on the case as usual so getting hold of it will probably require more effort than I'm prepared to spend. So, what's the best and quickest way to remove and uninstall everything from the PC without reinstalling it? Thanks. EDITS: I'm looking to remove things like Internet History and all installed programs, too. I know how to remove the history and each individual program, but that could take hours. The machine is not branded and therefore there is no website I can go to download recovery software. There is no recovery partition on the computer and I'm not aware of any recovery DVDs for it either. I can only assume it was installed from a retail copy, and therefore there is no way to recover it to factory settings. It needs to have XP installed, not any distribution of Linux. Like most average people, the person getting the computer will not understand what to do with a computer that doesn't have Windows installed, and software like Office does not work on Linux either. Buying another licence is not really an option either. She has just brought a laptop to replace the computer, so buying another licence for a computer that she's getting rid of doesn't really make sense. Thanks for all the help so far!

  Read the article

• There are currently no logon servers available

  - by Ian Robinson

  I am running a Windows 7 laptop that is joined to my company's domain. When I installed Windows 7, I created an account for myself, joined to the domain, and it had been working quite well even though I'm physically remote most of the time, and not actually on the network. However, today I created a new local user account (non-admin) for my little brother. While he was using it, he decided he wanted to install a program, because his account is not an admin, he was prompted to enter Administrator credentials to allow the program to make changes to his computer. I entered my credentials, and this is the first time I ran into the error message: There are currently no logon servers available to service the logon request. I tried logging off and loggin back in, rebooting, etc etc, and no matter what, every time I try to authenticate as my "normal" domain account - I get that message. I can no longer access my computer as an administrator. I no longer know how to log in to my machine using any other account aside from my little brother's non-admin account. I don't have any other local accounts created, and the default local admin account was never enabled. I'd appreciate any ideas on how I can recover access to my account. Let me know if I can provide any more information. FYI - This is a similar question but not sure any of the answers help me in my case. http://serverfault.com/questions/71632/there-are-currently-no-logon-servers-available-to-service-the-logon-request

  Read the article

• Error 0x80073cf9 when installing or updating apps from windows store

  - by cmorse

  On my Windows 8 desktop I keep getting error 0x80073cf9 when I try to install or update an app from the windows store. In the installings apps pane it just says "This app wasn't installed -- view details" and when I select that it says "Something happened and this app couldn't be installed. Please try again. Error code: 0x80073cf9" I am using the built-in windows firewall and antivirus. And my laptop is able to install updates when it is on the same network. This is what winstore.log shows when I try to update the maps app: 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] *********************************************************************** 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Process name: C:\Windows\system32\taskhost.exe 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] User name: Desktop\User 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Computer name: desktop 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Windows build: 9200.16424.amd64fre.win8_gdr.120926-1855 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011628] Client version: 615 2012-10-18 15:31:47.328, _Info_ WS [00015160:00011428] CWSTileUpdateHandler::Worker: Broker is handling badge updates. 2012-10-18 15:31:47.554, _Info_ WS [00002572:00008200] CProgressDispatcher::OnProgress: AppId = 97a2179c-38be-45a3-933e-0d2dbf14a142, PFN = Microsoft.BingMaps_8wekyb3d8bbwe, InstallPhase = 1, PhasePercent = 0, TotalPercent = 0 2012-10-18 15:31:47.558, _Warning_ WS [00002572:00008200] CDownloadProgress::IDownloadCompletedCallback::Invoke: Download complete result 0x80073cf9 for Microsoft.BingMaps_8wekyb3d8bbwe 2012-10-18 15:31:47.559, _Error_ WS [00002572:00008200] CActionItem::_DoDownload: Download failed for 97a2179c-38be-45a3-933e-0d2dbf14a142, hr=0x80073cf9 2012-10-18 15:31:47.560, _Info_ WS [00002572:00008200] CActionItem::_DoDownload: Notifying progress handlers of download failure for 97a2179c-38be-45a3-933e-0d2dbf14a142, hr=0x80073cf9 2012-10-18 15:31:47.560, _Error_ WS [00002572:00008200] CProgressDispatcher::OnError: PFN = Microsoft.BingMaps_8wekyb3d8bbwe, InstallPhase = 1, hrError = 0x80073cf9

  Read the article

• Install and enforce a scheduled task across a Windows domain

  - by Ricket

  We have a small domain of about 70 Windows computers (XP and 7). We want to schedule a command (an update mechanism) to run on all computers periodically, and we want the task to run regardless of the computer's connection to our network (i.e. the task should run even on a laptop that isn't connected to our VPN). We have a Microsoft System Center Essentials 2010 server so that might come in handy. The options I see are these: Do it completely manually. Install the scheduled task by hand or remotely using psexec (and the at command?) for each computer in our network. Enforce that newly imaged computers should have this task installed on them before deployed to the employee, or the task should be in the image. High initial cost (having to do this for each of 70 computers) but building it into the image might work... But there is some maintenance in making sure the task is added to everything. And I fear that a year or two down the road, we will have forgotten about it or gotten sloppy or had new IT employees who miss this step and some computers won't have the task. Having one of our servers run a script that loops through all computers and psexec's the command on each computer in the network -- it would only run on running, connected computers, so this solution wouldn't work. I suspect SCE could do something like this too, but again this is not a good solution. Neither of these are ideal, and I'm certain there is a better way to do it -- right? What is the best way to accomplish this task?

  Read the article

• Windows cannot open directory with too long name created by Linux

  - by Tim

  Hello! My laptop has two OSes: Windows 7 and Ubuntu 10.10. A partition of Windows 7 of format NTFS is mounted in Ubuntu. In Ubuntu, I created a directory under somehow deep path and with a long name for itself, specifically, the name for that directory is "a set of size-measurable subsets ie sigma algebra". Now in Windows, I cannot open the directory, which I guess is because of the name is too long, nor can I rename it. I was wondering if there is some way to access that directory under Windows? Better without changing the directory if possible, but will have to if necessary. Thanks and regards! Update: This is the output using "DIR /X" in cmd.exe, which does not shorten the directory name: F:\science\math\Foundations of mathematics\set theory\whether element of a set i s also a set\when element is set\when element sets are subsets of a universal se t\closed under some set operations\sigma algebra of sets>DIR /X Volume in drive F is Data Volume Serial Number is 0492-DD90 Directory of F:\science\math\Foundations of mathematics\set theory\whether elem ent of a set is also a set\when element is set\when element sets are subsets of a universal set\closed under some set operations\sigma algebra of sets 03/14/2011 10:43 AM <DIR> . 03/14/2011 10:43 AM <DIR> .. 03/08/2011 10:09 AM <DIR> a set of size-measurable sub sets ie sigma algebra 02/12/2011 04:08 AM <DIR> example 02/17/2011 12:30 PM <DIR> general 03/13/2011 02:28 PM <DIR> mapping from sigma algebra t o R or C i.e. measure 02/12/2011 04:10 AM <DIR> msbl mapping from general ms bl space to Borel msbl R or C 02/12/2011 04:10 AM 4,928 new file~ 03/14/2011 10:42 AM <DIR> temp 03/02/2011 10:58 AM <DIR> with Cartesian product of se ts 1 File(s) 4,928 bytes 9 Dir(s) 39,509,340,160 bytes free

  Read the article

• Microsoft Home Use Program - use more than one computer

  - by kristof

  I purchased a copy of MS Office through Microsoft Home Use Program (HUP) It basically allows you get a very cheap copy for home use if your employer owns the licence. My question is: Can I install it on more than one PC/laptop at home? I could not find anything in FAQ Thank you EDIT I was installing Office 2010 I found the following in the EULA: MICROSOFT SOFTWARE LICENSE TERMS .... 2 INSTALLATION AND USE RIGHTS. a. One Copy per Device. You may install one copy of the software on one device. That device is the “licensed device.” b. Licensed Device. You may only use one copy of the software on the licensed device at a time. c. Portable Device. You may install another copy of the software on a portable device for use by the single primary user of the licensed device. Here is the full copy of the licence

  Read the article

• ssd firmware, linux: updating large batch of drives

  - by wryfi

  I was recently hit with a fatal firmware bug that affected dozens of Crucial SSDs deployed in my datacenter. Many of the affected machines use LSI or other proprietary SAS controllers, which Crucial's bootable ISO does not recognize. None of the affected machines has a Windows license. The story is roughly similar for other SSD mfrs, including Samsung and Intel. To resolve this issue, I was forced to stop each machine, remove the affected SSD, remove the SSD from its hotswap caddy, install it temporarily into my ThinkPad, flash the firmware, reverse, rinse, repeat. It took the better part of a day to get through all the affected devices. I am looking for hardware, software, and/or purchasing strategies to ease this pain, as SSD firmware bugs seem inevitable, and our SSD footprint is growing. My first thought is to get a laptop with eSATA and one of these cables (http://www.newegg.com/Product/Product.aspx?Item=N82E16812311004). That should at least make it so I don't have to remove the drives from their caddies. Surely others have run into this. Any novel solutions?

  Read the article

• IPtables: DNAT not working

  - by GetFree

  In a CentOS server I have, I want to forward port 8080 to a third-party webserver. So I added this rule: iptables -t nat -A PREROUTING -p tcp --dport 8080 -j DNAT --to-destination thirdparty_server_ip:80 But it doesn't seem to work. In an effort to debug the process, I added these two LOG rules: iptables -t mangle -A PREROUTING -p tcp --src my_laptop_ip --dport ! 22 -j LOG --log-level warning --log-prefix "[_REQUEST_COMING_FROM_CLIENT_] " iptables -t nat -A POSTROUTING -p tcp --dst thirdparty_server_ip -j LOG --log-level warning --log-prefix "[_REQUEST_BEING_FORWARDED_] " (the --dport ! 22 part is there just to filter out the SSH traffic so that my log file doesn't get flooded) According to this page the mangle/PREROUTING chain is the first one to process incomming packets and the nat/POSTROUTING chain is the last one to process outgoing packets. And since the nat/PREROUTING chain comes in the middle of the other two, the three rules should do this: the rule in mangle/PREROUTING logs the incomming packets the rule in nat/PREROUTING modifies the packets (it changes the dest IP and port) the rule in nat/POSTROUTING logs the modified packets about to be forwarded Although the first rule does log incomming packets comming from my laptop, the third rule doesn't log the packets which are supposed to be modified by the second rule. It does log, however, packets that are produced in the server, hence I know the two LOG rules are working properly. Why are the packets not being forwarded, or at least why are they not being logged by the third rule? PS: there are no more rules than those three. All other chains in all tables are empty and with policy ACCEPT.

  Read the article

• How does one skip "Windows did not shut down successfully" in Win7-64?

  - by XenonofArcticus

  Migrating an app from an expensive and unreliable dedicated embedded x86 box running WinXP-embedded to COTS hardware (Dell E6410 laptop) running normal Win7-64. At this time, it's not feasible to deploy using Windows 7 embedded. The problem is, that the system is still sort of "embedded". The power could shut off at virtually any time without prior warning. We've stripped the OS down and removed the battery capability so that it will power down as desired. The app never writes to the disk, so it's not like we're going to corrupt anything terribly. The system is essentially idle after our app is up and running (with the exception of some computation, graphics, and TCP/IP and serial communications) so the OS enters a pretty stable state rather quickly. After a power-loss however, it rightly complains that Windows did not shut down successfully and presents the user with the Windows Error Recovery text screen. If left alone, it does eventually move on booting just fine, but we'd like to skip that step if possible. WinXP-embedded is designed to do this automatically, so I know it's possible. I've looked at the Kernel Switches but I didn't see anything documented for "Skip Windows Error Recovery". I've also read extensively on the startup process: http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/windows-nt-6-boot-process.html I know I can disable the auto chkdsk in the registry, but that's not the same thing either. So, how do I streamline the boot process to not hassle the user about a situation that will be the regular normal situation?

  Read the article

• Can't authorize a server for Amazon RDS

  - by Parris

  We are attempting to slowly migrate a website over to AWS among other things. We decided the first thing to move was the database. We have some dedicated server with a different hosting provider. We only have one IP. I am having trouble authorizing the ip so that the old server can connect to RDS. It simply hangs for a while while using the mysql cli, then responds: ERROR 2003 (HY000): Can't connect to MySQL server on 'db.address.us-east-1.rds.amazonaws.com' (110) It did work on my laptop though. I am not quite sure what is wrong. I have a feeling I don't quite understand CIDR/IP. I simply took the ip address and tacked on /32 at the end. Then I gleaned some information that it also has to do with subnet mask? ifconfig reports: 255.255.255.0 I found a calculator and the IP changed a bit and had /24 at the end. That still didn't work. One other note... perhaps i dont know enough about the differences between OS. The hosting provider is using centOS, while our development machines are all ubuntu. Any insight would be extremely helpful! THANKS :)

  Read the article

• How do I install Windows XP from an external hard drive?

  - by Plasmer

  I'm trying to install Windows XP Media Center edition by copying the install disc image to an external hard drive and making it bootable. Has anyone had success getting this to work on systems that can't boot from dvds/floppies? I'm basically working from this guide: http://www.dl4all.com/other/21495-install-windows-xp-from-usb.html Update - 2/15/10 I used WinToFlash on my laptop to format my usb hard drive from my install dvd (Windows XP Media Center Version 2005 with Update Rollup 2 from Dell) and selected "boot from usb device" at the boot selection menu and the windows installer started up. However, an error message came up saying that: "A problem has been detected and windows has been shut down to prevent damage to your computer." Originally on my desktop machine, I had 1 150Gb SATA drive, and 2 150 Gb SATA drives striped together using RAID. From the hard drive diagnostics, it appears the windows install on one of the RAIDed disks lost a block and this has been preventing me from booting up. I replaced the standalone drive with a new 1Tb SATA drive and disconnected the other hard drives. Could the message be indicating a virus is on the unformatted drive? or the usb hard drive? Update 2 - 2/15/10 The external hard drive didn't find any viruses when scanned. I tried installing Vista Home Premium 64bit SP1 using WinToFlash and that installed successfully onto the new 1Tb drive. WinToFlash was really easy to use and helped a lot, thanks!

  Read the article

• using a second computer as a mere screen/monitor in X (VNC?)

  - by lara michaels

  Hello My goal is to use three monitors with my Linux system. It is a laptop, so adding another video card is not the easiest solution. (I have investigated a number of such options: getting a docking station with a PCI slot, USB/Cardbus vga adapters, etc, and for the time being don't want to go that way.) I am wondering if using an older desktop+screen I have lying around as the third "monitor" might be the easiest solution, if only there is a way to get it to work as a seamless, integrated desktop. I was wondering if I can use VNC or perhaps X itself (?) to achieve the following: computer A is my main computer; it has all my files, etc. computer B is used just to display on an additional screen keyboard+mouse are connected to computer A use VNC or X to connect the two so that computer B shows a X screen that is just as if it was a third physical screen connected to computer A. I don't know if the last point is clear, but what I mean is that I would like to be able to: be able to have my window manager assign/move around virtual desktops on all three screens move windows back and forth between the screens attached to computer A and the screen of computer B be able to copy something in an app being shown on a screen of computer A and paste it into an app being shown on the screen attached to computer B access the filesystem on my main computer (A) when using applications that are being shown on the screen attached to computer B Basically, I would like X to treat computer B just like it was nothing but a third physical screen... Is this doable? : ) ~lara

  Read the article

• Share Firefox/Thnderbird data between W7 and Linux Mint 12 in dual boot computer

  - by Albert

  I've just set up my laptop (where I had running only W7) with a dual boot to run Linux Mint 12 as well. I have a "Data" partition (apart from the required partitions for W7 and Linux) where I store pretty much everything that isn't software installations (music, videos, project files, etc). I seem to be able to access that NTFS partition totally fine from Mint (like I've always done with W7), which is cool because I can access all that stuff regardless of which OS I'm using. I would like to know if it's possible (and how) to go one step further and share programs data between the two OS. One example would be my Firefox and Thunderbird data. For example, in Firefox share my bookmarks (and if I could share history, autocomplete and all that stuff, that would be awesome). In thunderbird, be able to share my mail and configuration, seeing the same inbox, folders, message rules, etc... So if I receive/send an email from W7 and later switch to Mint, I can see that email as it had been received/sent from Mint, and vice versa. Is this even possible? Or am I asking for too much convenience? If it's possible, any clues on how to set it all up?

  Read the article

< Previous Page | 300 301 302 303 304 305 306 307 308 309 310 311  | Next Page >