Search Results

Search found 11224 results on 449 pages for 'suggestions'.

Page 304/449 | < Previous Page | 300 301 302 303 304 305 306 307 308 309 310 311  | Next Page >

  • Real-Time Multi-User Gaming Platform

    - by Victor Engel
    I asked this question at Stack Overflow but was told it's more appropriate here, so I'm posting it again here. I'm considering developing a real-time multi-user game, and I want to gather some information about possibilities before I do some real development. I've thought about how best to ask the question, and for simplicity, the best way that occurred to me was to make an analogy to the field (or playground) game darebase. In the field game of darebase, there are two or more bases. To start, there is one team on each base. The game is a fancy game of tag. When two people meet out in the field, the person who left his base most recently timewise captures the other person. They then return to that person's base. Play continues until everyone is part of the same team. So, analogizing this to an online computer game, let's suppose there are an indefinite number of bases. When a person starts up the game, he has a team that is located at, for example, his current GPS coordinates. It could be a virtual world, but for sake of argument, let's suppose the virtual world corresponds to the player's actual GPS coordinates. The game software then consults the database to see where the closest other base is that is online, and the two teams play their game of virtual tag. Note that the user of the other base could have a different base than the one run by the current user as the closest base to him, in which case, he would be in two simultaneous battles, one with each base. When they go offline, the state of their players is saved on a server somewhere. Game logic calls for the players to have some automaton-logic of some sort, so they can fend for themselves in a limited way using basic rules, until their user goes online again. The user doesn't control the players' movements directly, but issues general directives that influence the players' movement logic. I think this analogy is good enough to frame my question. What sort of platforms are available to develop this sort of game? I've been looking at smartfoxserver, but I'm not convinced yet that it is the best option or even that it will work at all. One possibility, of course, would be to roll out my own web server, but I'd rather not do that if there is an existing service out there already that I could tap into. I will be developing for iOS devices at first. So any suggestions would be greatly appreciated. I think I need to establish the architecture first before proceeding with this project. Note that darbase is not the game I intend to implement, but, upon reflection, that might not be a bad idea either.

    Read the article

  • Is there an API for determining congressional districts?

    - by ardavis
    I'm looking to determine the congressional district based on an address my user is providing. This will avoid having the user to look it up themselves. Does an API of this sort exist? Note Through my attempts to find one, I've only come across these: http://www.govtrack.us/developers/api (not sure how to submit an an address or zip code however) The following resources are available in the API ...Bills and resolutions in the U.S. Congress since 1973 (the 93rd Congress). ...A (bill, person) pair indicating cosponsorship, with join and withdrawn dates. ...Members of Congress and U.S. Presidents since the founding of the nation. ...Terms held in office by Members of Congress and U.S. Presidents. Each term corresponds with an election, meaning each term in the House covers two years (one 'Congress'), as President four years, and in the Senate six years (three 'Congresses'). ...Roll call votes in the U.S. Congress since 1789. How people voted is accessed through the Vote_voter API. ...How people voted on roll call votes in the U.S. Congress since 1789. See the Vote API. Filter on the vote field to get the results of a particular vote... http://www.opencongress.org/api (seems to be a way to find congress information, but not districts) This API provides programmers with structured access to all the data on OpenCongress, everything from official bill info to news and blog coverage to user-generated votes on bills and much more... This API defaults to returning XML. All queries can also return JSON... https://groups.google.com/forum/?fromgroups=#!topic/opendems-discuss/CeKyi_aANaE (similar question, no resolution) I've been looking over Open Dems, and seeing what's exposed at this point and what isn't. I work with Democrats Abroad, and am interested in using stuff from the lab for their sites. I quickly looked over the Precinct API, which does both more and less than what I'd need. An ideal resource would be any way of translating addresses into CD at the very least (getting state district data would be good as well), since that would make it easier for DA's membership to make a difference in races like last month's NY26 race... Update I'm looking at the source for the govtrack.us website and the 'doGeoCode' function may be useful. view-source:http://www.govtrack.us/congress/members If no one has any suggestions, I will try to go off of what they are doing.

    Read the article

  • Incorrect results for frustum cull

    - by DeadMG
    Previously, I had a problem with my frustum culling producing too optimistic results- that is, including many objects that were not in the view volume. Now I have refactored that code and produced a cull that should be accurate to the actual frustum, instead of an axis-aligned box approximation. The problem is that now it never returns anything to be in the view volume. As the mathematical support library I'm using does not provide plane support functions, I had to code much of this functionality myself, and I'm not really the mathematical type, so it's likely that I've made some silly error somewhere. As follows is the relevant code: class Plane { public: Plane() { r0 = Math::Vector(0,0,0); normal = Math::Vector(0,1,0); } Plane(Math::Vector p1, Math::Vector p2, Math::Vector p3) { r0 = p1; normal = Math::Cross((p2 - p1), (p3 - p1)); } Math::Vector r0; Math::Vector normal; }; This class represents one plane as a point and a normal vector. class Frustum { public: Frustum( const std::array<Math::Vector, 8>& points ) { planes[0] = Plane(points[0], points[1], points[2]); planes[1] = Plane(points[4], points[5], points[6]); planes[2] = Plane(points[0], points[1], points[4]); planes[3] = Plane(points[2], points[3], points[6]); planes[4] = Plane(points[0], points[2], points[4]); planes[5] = Plane(points[1], points[3], points[5]); } Plane planes[6]; }; The points are passed in order where (the inverse of) each bit of the index of each point indicates whether it's the left, top, and back of the frustum, respectively. As such, I just picked any three points where they all shared one bit in common to define the planes. My intersection test is as follows (based on this): bool Intersects(Math::AABB lhs, const Frustum& rhs) const { for(int i = 0; i < 6; i++) { Math::Vector pvertex = lhs.TopRightFurthest; Math::Vector nvertex = lhs.BottomLeftClosest; if (rhs.planes[i].normal.x <= -0.0f) { std::swap(pvertex.x, nvertex.x); } if (rhs.planes[i].normal.y <= -0.0f) { std::swap(pvertex.y, nvertex.y); } if (rhs.planes[i].normal.z <= -0.0f) { std::swap(pvertex.z, nvertex.z); } if (Math::Dot(rhs.planes[i].r0, nvertex) < 0.0f) { return false; } } return true; } Also of note is that because I'm using a left-handed co-ordinate system, I wrote my Cross function to return the negative of the formula given on Wikipedia. Any suggestions as to where I've made a mistake?

    Read the article

  • Parallel Port Problem in 12.04

    - by Frank Oberle
    I have a “dumb” printer attached to a parallel port in my machine which works fine under the “other” resident operating system (from Redmond) on the same machine. I recently added Ubuntu 12.04 as a dual boot on the machine, but Ubuntu doesn't seem to recognize the parallel port at all. All I need to set up a printer is a really plain-vanilla fixed pitch text-only generic driver, which is present, but no parallel ports show up. (The other printers, all on USB ports, seem to work just fine). Following what appeared to me to be the most reasonable of the many conflicting pieces of advice on the web, here's what I did: I added the following lines to /etc/modules parport_pc ppdev parport Then, after rebooting, I checked to see that the lines were still present, and they were. I ran dmesg | grep par and got the following references in the output that seemed like they might have to do with the parallel port: [ 14.169511] parport_pc 0000:03:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 14.169516] PCI parallel port detected: 9710:9805, I/O at 0xce00(0xcd00), IRQ 21 [ 14.169577] parport0: PC-style at 0xce00 (0xcd00), irq 21, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 14.354254] lp0: using parport0 (interrupt-driven). [ 14.571358] ppdev: user-space parallel port driver [ 16.588304] type=1400 audit(1347226670.386:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=964 comm="apparmor_parser" [ 16.588756] type=1400 audit(1347226670.386:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=964 comm="apparmor_parser" [ 16.673679] type=1400 audit(1347226670.470:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1010 comm="apparmor_parser" [ 16.675252] type=1400 audit(1347226670.470:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1014 comm="apparmor_parser" [ 16.675716] type=1400 audit(1347226670.470:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1014 comm="apparmor_parser" [ 16.676636] type=1400 audit(1347226670.474:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1015 comm="apparmor_parser" [ 16.677124] type=1400 audit(1347226670.474:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1015 comm="apparmor_parser" [ 1545.725328] parport0: ppdev0 forgot to release port I have no idea what any of that means, but the line “parport0: ppdev0 forgot to release port ” seems unusual. I was still unable to add a printer for my old clunker, so I tried the direct approach, typing echo “Hello” > /dev/lp0 and received a Permission denied message. I then tried echo “Hello” > /dev/parport0 which didn't give me any message at all, but still didn't print anything. Running the command sudo /usr/lib/cups/backend/parallel gives the following: direct parallel:/dev/lp0 "unknown" "LPT #1" "" "" Checking the permissions for /dev/parport0, Owner, Group, and Other are all set to read and write. crw-rw---- 1 root lp 6, 0 Sep 9 16:37 /dev/lp0 crw-rw-rw- 1 root lp 99, 0 Sep 9 16:37 /dev/parport0 The output of the command lpinfo -v includes the following line: direct parallel:/dev/lp0 I've read several web postings that seem to suggest this has been a problem for several years, but the bug reports were closed because there wasn't enough information to address the issue (shades of Microsoft!). Any suggestions as to what I might be missing here?

    Read the article

  • Drawing 2D Grid in 3D View - Need help with method

    - by Deukalion
    I'm trying to draw a simple 2D grid for an editor, to able to navigate more clearly around the 3D space, but I can't render it: Grid2D class, creates a grid of a certain size at a location and should just draw lines. public class Grid2D : IShape { private VertexPositionColor[] _vertices; private Vector2 _size; private Vector3 _location; private int _faces; public Grid2D(Vector2 size, Vector3 location, Color color) { float x = 0, y = 0; if (size.X < 1f) { size.X = 1f; } if (size.Y < 1f) { size.Y = 1f; } _size = size; _location = location; List<VertexPositionColor> vertices = new List<VertexPositionColor>(); _faces = 0; for (y = -size.Y; y <= size.Y; y++) { vertices.Add(new VertexPositionColor(location + new Vector3(-size.X, y, 0), color)); vertices.Add(new VertexPositionColor(location + new Vector3(size.X, y, 0), color)); _faces++; } for (x = -size.X; x <= size.X; x++) { vertices.Add(new VertexPositionColor(location + new Vector3(x, -size.Y, 0), color)); vertices.Add(new VertexPositionColor(location + new Vector3(x, size.Y, 0), color)); _faces++; } _vertices = vertices.ToArray(); } public void Render(GraphicsDevice device) { device.DrawUserPrimitives<VertexPositionColor>(PrimitiveType.LineList, _vertices, 0, _faces); } } Like this: +----+----+----+----+ | | | | | +----+----+----+----+ | | | | | +----+----+----+----+ | | | | | +----+----+----+----+ | | | | | +----+----+----+----+ Anyone knows what I'm doing wrong? If I add a Shape without texture, it's set automatically to VertexColorEnabled and TextureEnabled = false. This is how I render it: foreach (RenderObject render in _renderObjects) { render.Effect.Projection = projection; render.Effect.View = view; render.Effect.World = world; foreach (EffectPass pass in render.Effect.CurrentTechnique.Passes) { pass.Apply(); try { // Could be a Grid2D render.Shape.Render(_device); } catch { throw; } } } Exception is thrown: The current vertex shader declaration does not include all the elements required by the current Vertex Shader. Normal0 is missing. Simply put, I can't figure out how to draw a few lines. I want to draw them one at a time and I guess that's the problem I haven't figured out, and even when I tried rendering vertices[i], vertices[i+1] and primitiveCount = 1, vertices = 2, and so on it didn't work either. Any suggestions?

    Read the article

  • Am I deluding myself? Business analyst transition to programmer

    - by Ryan
    Current job: Working as the lead business analyst for a Big 4 firm, leading a team of developers and testers working on a large scale re-platforming project (4 onshore dev, 4 offshore devs, several onshore/offshore testers). Also work in a similar capacity on other smaller scale projects. Extent of my role: Gathering/writing out requirements, creating functional specifications, designing the UI (basically mapping out all front-end aspects of the system), working closely with devs to communicate/clarify requirements and come up with solutions when we hit roadblocks, writing test cases (and doing much of the testing), working with senior management and key stakeholders, managing beta testers, creating user guides and leading training sessions, providing key technical support. I also write quite a few macros in Excel using VBA (several of my macros are now used across the entire firm, so there are maybe around 1000 people using them) and use SQL on a daily basis, both on the SQL compact files the program relies on, our SQL Server data and any Access databases I create. The developers feel that I am quite good in this role because I understand a lot about programming, inherent system limitations, structure of the databases, etc so it's easier for me to communicate ideas and come up with suggestions when we face problems. What really interests me is developing software. I do a fair amount of programming in VBA and have been wanting to learn C# for awhile (the dev team uses C# - I review code occasionally for my own sake but have not had any practical experience using it). I'm interested in not just the business process but also the technical side of things, so the traditional BA role doesn't really whet my appetite for the kind of stuff I want to do. Right now I have a few small projects that managers have given me and I'm finding new ways to do them (like building custom Access applications), so there's a bit here and there to keep me interested. My question is this: what I would like to do is create custom Excel or Access applications for small businesses as a freelance business (working as a one-man shop; maybe having an occasional contractor depending on a project's complexity). This would obviously start out as a part-time venture while I have a day job, but eventually become a full-time job. Am I deluding myself to thinking I can go from BA/part-time VBA programmer to making a full-time go of a freelance business (where I would be starting out just writing custom Excel/Access apps in VBA)? Or is this type of thing not usually attempted until someone gains years of full-time programming experience? And is there even a market for these types of applications amongst small businesses (and maybe medium-sized) businesses?

    Read the article

  • How to Overcome or fix MIXED_DML_OPERATION error in Salesforce APEX without future method ?

    - by sathya
    How to Overcome or fix MIXED_DML_OPERATION error in Salesforce APEX without future method ?MIXED_DML_OPERATION :-one of the worst issues we have ever faced :)While trying to perform DML operation on a setup object and non-setup object in a single action you will face this error.Following are the solutions I tried and the final one worked out :-1. perform the 1st objects DML on normal apex method. Then Call the 2nd objects DML through a future method.    Drawback :- You cant get a response from the future method as its context is different and because its executing asynchronously and that its static.2. Tried the following option but it didnt work :-    1. perform the dml operation on the normal apex method.    2. tried calling the 2nd dml from trigger thinking that it would be in a different context. But it didnt work.    3. Some suggestions were given in some blogs that we could try System.runas()   Unfortunately that works only for test class.   4. Finally achieved it with response synchronously through the following solution :-    a. Created 2 apex:commandbuttons :-        1. <apex:commandButton value="Save and Send Activation Email" action="{!CreateContact}"  rerender="junkpanel" oncomplete="callSimulateUserSave()">            Note :- Oncomplete will not work if you dont have a rerender attribute. So just try refreshing a junk panel.        2. <apex:commandButton value="SimulateUserSave" id="SimulateUserSave" action="{!SaveUser}"  style="display:none;margin-left:5px;"/>        Have a junk panel as well just for rerendering  :-        <apex:outputPanel id="junkpanel"></apex:outputPanel>    b. Created this javascript function which is called from first button's oncomplete and clicks the second button :-                function callSimulateUserSave()                {                    // Specify the id of the button that needs to be clicked. This id is based on the Apex Component Hierarchy.                    // You will not get this value if you dont have the id attribute in the button which needs to be clicked from javascript                    // If you have any doubt in getting this value. Just hover over the button using Chrome developer tools to get the id.                    // But it will show like theForm:SimulateUserSave but you need to replace the colon with a dot here.                    // Note :- I have given display:none in the style of the second button to make sure that, it is not visible for the user.                    var mybtn=document.getElementById('{!$Component.theForm.SimulateUserSave}');                                    mybtn.click();                }    c. Apex Methods CreateContact and SaveUser are the pagereference methods which contains the code to create contact and user respectively.       After inserting the user inside the second apex method you can just set some public Properties in the page,        for ex:- created userid to get the user details and display in the page to show the acknowledgement to the users that the User is created.

    Read the article

  • Accessing SQL Server data from iOS apps

    - by RobertChipperfield
    Almost all mobile apps need access to external data to be valuable. With a huge amount of existing business data residing in Microsoft SQL Server databases, and an ever-increasing drive to make more and more available to mobile users, how do you marry the rather separate worlds of Microsoft's SQL Server and Apple's iOS devices? The classic answer: write a web service layer Look at any of the questions on this topic asked in Internet discussion forums, and you'll inevitably see the answer, "just write a web service and use that!". But what does this process gain? For a well-designed database with a solid security model, and business logic in the database, writing a custom web service on top of this just to access some of the data from a different platform seems inefficient and unnecessary. Desktop applications interact with the SQL Server directly - why should mobile apps be any different? The better answer: the iSql SDK Working along the lines of "if you do something more than once, make it shared," we set about coming up with a better solution for the general case. And so the iSql SDK was born: sitting between SQL Server and your iOS apps, it provides the simple API you're used to if you've been developing desktop apps using the Microsoft SQL Native Client. It turns out a web service remained a sensible idea: HTTP is much more suited to the Big Bad Internet than SQL Server's native TDS protocol, removing the need for complex configuration, firewall configuration, and the like. However, rather than writing a web service for every app that needs data access, we made the web service generic, serving only as a proxy between the SQL Server and a client library integrated into the iPhone or iPad app. This client library handles all the network communication, and provides a clean API. OSQL in 25 lines of code As an example of how to use the API, I put together a very simple app that allowed the user to enter one or more SQL statements, and displayed the results in a rather primitively formatted text field. The total amount of Objective-C code responsible for doing the work? About 25 lines. You can see this in action in the demo video. Beta out now - your chance to give us your suggestions! We've released the iSql SDK as a beta on the MobileFoo website: you're welcome to download a copy, have a play in your own apps, and let us know what we've missed using the Feedback button on the site. Software development should be fun and rewarding: no-one wants to spend their time writing boiler-plate code over and over again, so stop writing the same web service code, and start doing exciting things in the new world of mobile data!

    Read the article

  • Help with Strategy-game AI

    - by f20k
    Hi, I am developing a strategy-game AI (think: Final Fantasy Tactics), and I am having trouble coming up for the design of the AI. My main problem is determining which is the optimal thing for it to do. First let me describe the priority of what action I would like the AI to take: Kill nearest player unit Fulfill primary directive (kill all player units, kill target unit, survive for x turns) Heal ally unit / cast buffer Now the AI can do the following in its turn: Move - {Attack / Ability / Item} (either attack or ability or item) {Attack / Ability / Item} - Move Move closer (if targets not in range) {Attack / Ability / Item} (if move not available) Notes Abilities have various ranges / effects / costs / effects. Each ai unit has maybe 5-10 abilities to choose from. The AI will prioritize killing over safety unless its directive is to survive for x turns. It also doesn't care about ability cost much. While a player may want to save a big spell for later, the AI will most likely use it asap. Movement is on a (hex) grid num of player units: 3-6 num of ai units: 3-7 or more. Probably max 10. AI and player take turns controlling ONE unit, instead of all at the same time. Platform is Android (if program doesnt respond after some time, there will be a popup saying to Force Quit or Wait - which looks really bad!). Now comes the questions: The best ability to use would obviously be the one that hits the most targets for the most damage. But since each ability has different ranges, I won't know if they are in range without exploring each possible place I can move to. One solution would be to go through each possible places to move to, determine the optimal attack at that location - which gives me a list of optimal moves for each location. Then choose the optimal out of the list and execute it. But this will take a lot of CPU time. Is there a better solution? My current idea is to move as close as possible towards the closest, largest group of people, and determine the optimal attack/ability from there. I think this would be a lot less work for the CPU and still allow for wide-range attacks. Its sub-optimal but the AI will still seem 'smart'. Other notes/questions: Am I over-thinking/over-complicating it? Better solution? I am open to all sorts of suggestions I have taken a look at the spell-casting question, but it doesn't take into account the movement - so perhaps use that algo for each possible move location? The top answer mentioned it wasn't great for area-of-effect and group fights - so maybe requires more tweaking? Please, if you mention a graph/tree, let me know basically how to use it. E.g. Node means ability, level corresponds to damage, then search for the deepest node.

    Read the article

  • Best way to remote restart Ubuntu from Windows machine

    - by robsoft
    Background: I'm looking to put a series of Ubuntu machines into retail locations, they're being used as dumb kiosks to show a series of slides onto large LCD panel TV screens. Once installed, they won't have a keyboard or mouse connected but will have a fixed IP on the local network. Everything is configured to auto-start, no automatic updates, no power saving etc - I think we're pretty-much good to go apart from one thing. I need the retail staff to be able to restart the boxes if a problem arises. We have VNC running (now that we've turned off desktop enhancements!) so that we can remotely get into the machines if we need to, but that's not something we would allow the retail staff to do. The machines are going to be physically 'out of the way' (probably in the ceiling space) so the power button is not easily accessible!. I'd like to have some means of allowing the retail staff to restart the Ubuntu machine, from the desktop of one of their Windows terminals. I don't really want to give them some kind of raw terminal access (the command line will frighten them!) and I don't want them to use VNC (as stated above). Ideally there would be an icon on the Windows desktop, they double-click it, reply to a simple 'are you sure?' prompt, and then the Ubuntu box is told to restart. The Windows side of that won't be a problem, we can write something using Delphi, Python & Qt4, whatever - it's the Ubuntu side of it I'm stuck with. Out of sight/view, could I have a Windows program open a terminal across the network and tell Ubuntu to restart? Is this what SSH could be used for (I have never set that kind of thing up). The Windows programming side isn't really an issue, it's just that I'm a total Ubuntu noob and don't know where to start from the platform point of view. The other thing we considered is also having the machine automatically restart itself at a set time each day (obviously out of store hours!). To me, that seems a bit unnecessary (though forcing a restart once a week/month might be worthwhile). Any thoughts or suggestions? Being able to restart the box on demand across the network is my prime requirement.

    Read the article

  • So, I though I wanted to learn frontend/web development and break out of my comfort zone...

    - by ripper234
    I've been a backend developer for a long time, and I really swim in that field. C++/C#/Java, databases, NoSql, caching - I feel very much at ease around these platforms/concepts. In the past few years, I started to taste end-to-end web programming, and recently I decided to take a job offer in a front end team developing a large, complex product. I wanted to break out of my comfort zone and become more of an "all around developer". Problem is, I'm getting more and more convinced I don't like it. Things I like about backend programming, and missing in frontend stuff: More interesting problems - When I compare designing a server that handle massive data, to adding another form to a page or changing the validation logic, I find the former a lot more interesting. Refactoring refactoring refactoring - I am addicted to Visual Studio with Resharper, or IntelliJ. I feel very comfortable writing code as it goes without investing too much thought, because I know that with a few clicks I can refactor it into beautiful code. To my knowledge, this doesn't exist at all in javascript. Intellisense and navigation - I hate looking at a bunch of JS code without instantly being able to know what it does. In VS/IntelliJ I can summon the documentation, navigate to the code, climb up inheritance hiererchies ... life is sweet. Auto-completion - Just hit Ctrl-Space on an object to see what you can do with it. Easier to test - With almost any backend feature, I can use TDD to capture the requirements, see a bunch of failing tests, then implement, knowing that if the tests pass I did my job well. With frontend, while tests can help a bit, I find that most of the testing is still manual - fire up that browser and verify the site didn't break. I miss that feeling of "A green CI means everything is well with the world." Now, I've only seriously practiced frontend development for about two months now, so this might seem premature ... but I'm getting a nagging feeling that I should abandon this quest and return to my comfort zone, because, well, it's so comfy and fun. Another point worth mentioning in this context is that while I am learning some frontend tools, a lot of what I'm learning is our company's specific infrastructure, which I'm not sure will be very useful later on in my career. Any suggestions or tips? Do you think I should give frontend programming "a proper chance" of at least six to twelve months before calling it quits? Could all my pains be growing pains, and will they magically disappear as I get more experienced? Or is gaining this perspective is valuable enough, even if plan to do more "backend stuff" later on, that it's worth grinding my teeth and continuing with my learning?

    Read the article

  • Does it make the game more fun when the user is forced to progress thru the levels sequentially rather than letting them pick and play?

    - by BeachRunnerJoe
    Hello. For the first time in my game, I'm stuck with a real design dilemma. I guess that's a good thing ;) I'm building a word puzzle game that has five levels, each with 30 puzzles. Currently, the user has to solve one puzzle at a time before moving to the next. However, I'm finding the user occasionally gets stuck on a puzzle, at which point they can no longer play until they solve it. This is obviously bad because many people will just quit playing the game and delete the app since they get frustrated and can't play any other puzzles until the current puzzle is solved. The only elegant solution I can find to helping the player get unstuck is changing the design of the game to allow the users to pick any puzzle to play at any time. This way, if they get stuck, they can come back to it later and at least they have other puzzles to play in the meantime. It's my opinion, however, that this new flow design doesn't make the game as fun as the original flow design where the player has to complete a puzzle before moving to the next. To me, it's like anything else, when you only have one of something, it's more enjoyable, but when you have 30 of something, it's far less enjoyable. In fact, when I present the user with 30 puzzles to choose from that they need to solve before unlocking the next level, it almost seems as tho I'm making them feel like it's work they have to do. I even had a tester voluntarily tell me that being forced to complete a puzzle before moving to the next is more motivating. My questions are... Do you agree/disagree? Do you have any suggestions for how I can help the player get unstuck? Thanks so much in advance for your thoughts! EDIT: I should mention that I've already considered a few other solutions to helping the user get unstuck, but none of them seem like good ideas. They are... Add more hints: Currently, the user gets two hints per puzzle. If I increase the hint count, it only makes the game more easy and still leaves the possibility of the user getting stuck. Add a "Show Solution" button: This seems like a bad idea because it's my opinion this takes the fun out of the game for many people who would probably otherwise solve the puzzle if they didn't have the quick option to see the solution.

    Read the article

  • Creating Corporate Windows Phone Applications

    - by Tim Murphy
    Most developers write Windows Phone applications for their own gratification and their own wallets.  While most of the time I would put myself in the same camp, I am also a consultant.  This means that I have corporate clients who want corporate solutions.  I recently got a request for a system rebuild that includes a Windows Phone component.  This brought up the questions of what are the important aspects to consider when building for this situation. Let’s break it down in to the points that are important to a company using a mobile application.  The company want to make sure that their proprietary software is safe from use by unauthorized users.  They also want to make sure that the data is secure on the device. The first point is a challenge.  There is no such thing as true private distribution in the Windows Phone ecosystem at this time.  What is available is the ability to specify you application for targeted distribution.  Even with targeted distribution you can’t ensure that only individuals within your organization will be able to load you application.  Because of this I am taking two additional steps.  The first is to register the phone’s DeviceUniqueId within your system.  Add a system sign-in and that should cover access to your application. The second half of the problem is securing the data on the phone.  This is where the ProtectedData API within the System.Security.Cryptography namespace comes in.  It allows you to encrypt your data before pushing it to isolated storage on the device. With the announcement of Windows Phone 8 coming this fall, many of these points will have different solutions.  Private signing and distribution of applications will be available.  We will also have native access to BitLocker.  When you combine these capabilities enterprise application development for Windows Phone will be much simpler.  Until then work with the above suggestions to develop your enterprise solutions. del.icio.us Tags: Windows Phone 7,Windows Phone,Corporate Deployment,Software Design,Mango,Targeted Applications,ProtectedData API,Windows Phone 8

    Read the article

  • Switch from back-end to front-end programming: I'm out of my comfort zone, should I switch back?

    - by ripper234
    I've been a backend developer for a long time, and I really swim in that field. C++/C#/Java, databases, NoSql, caching - I feel very much at ease around these platforms/concepts. In the past few years, I started to taste end-to-end web programming, and recently I decided to take a job offer in a front end team developing a large, complex product. I wanted to break out of my comfort zone and become more of an "all around developer". Problem is, I'm getting more and more convinced I don't like it. Things I like about backend programming, and missing in frontend stuff: More interesting problems - When I compare designing a server that handle massive data, to adding another form to a page or changing the validation logic, I find the former a lot more interesting. Refactoring refactoring refactoring - I am addicted to Visual Studio with Resharper, or IntelliJ. I feel very comfortable writing code as it goes without investing too much thought, because I know that with a few clicks I can refactor it into beautiful code. To my knowledge, this doesn't exist at all in javascript. Intellisense and navigation - I hate looking at a bunch of JS code without instantly being able to know what it does. In VS/IntelliJ I can summon the documentation, navigate to the code, climb up inheritance hiererchies ... life is sweet. Auto-completion - Just hit Ctrl-Space on an object to see what you can do with it. Easier to test - With almost any backend feature, I can use TDD to capture the requirements, see a bunch of failing tests, then implement, knowing that if the tests pass I did my job well. With frontend, while tests can help a bit, I find that most of the testing is still manual - fire up that browser and verify the site didn't break. I miss that feeling of "A green CI means everything is well with the world." Now, I've only seriously practiced frontend development for about two months now, so this might seem premature ... but I'm getting a nagging feeling that I should abandon this quest and return to my comfort zone, because, well, it's so comfy and fun. Another point worth mentioning in this context is that while I am learning some frontend tools, a lot of what I'm learning is our company's specific infrastructure, which I'm not sure will be very useful later on in my career. Any suggestions or tips? Do you think I should give frontend programming "a proper chance" of at least six to twelve months before calling it quits? Could all my pains be growing pains, and will they magically disappear as I get more experienced? Or is gaining this perspective is valuable enough, even if plan to do more "backend stuff" later on, that it's worth grinding my teeth and continuing with my learning?

    Read the article

  • Managing accounts on a private website for a real-life community

    - by Smudge
    I'm looking at setting-up a walled-in website for a real-life community of people, and I was wondering if anyone has any experience with managing member accounts for this kind of thing. Some conditions that must be met: This community has a set list of real-life members, each of whom would be eligible for one account on the website. We don't expect or require that they all sign-up. It is purely opt-in, but we anticipate that many of them would be interested in the services we are setting up. Some of the community members emails are known, but some of them have fallen off the grid over the years, so ideally there would be a way for them to get back in touch with us through the public-facing side of the site. (And we'd want to manually verify the identity of anyone who does so). Their names are known, and for similar projects in the past we have assigned usernames derived from their real-life names. This time, however, we are open to other approaches, such as letting them specify their own username or getting rid of usernames entirely. The specific web technology we will use (e.g. Drupal, Joomla, etc) is not really our concern right now -- I am more interested in how this can be approached in the abstract. Our database already includes the full member roster, so we can email many of them generated links to a page where they can create an account. (And internally we can require that these accounts be paired with a known member). Should we have them specify their own usernames, or are we fine letting them use their registered email address to log-in? Are there any paradigms for walled-in community portals that help address security issues if, for example, one of their email accounts is compromised? We don't anticipate attempted break-ins being much of a threat, because nothing about this community is high-profile, but we do want to address security concerns. In addition, we want to make the sign-up process as painless for the members as possible, especially given the fact that we can't just make sign-ups open to anyone. I'm interested to hear your thoughts and suggestions! Thanks!

    Read the article

  • New computer hangs on shutdown/reboot, how to troubleshoot?

    - by Torben Gundtofte-Bruun
    My system is working perfectly but it freezes during shutdown/reboot/suspend/hibernate: All windows and the menu bar disappear but the desktop wallpaper remains. It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown console text. The system is brand-new and fully updated using Update Manager. How can I determine what is causing the freeze? Is there a log I can investigate? How can I fix this? I see no obvious cause of the freeze. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing shutdown right from the login screen). What I've tried so far: Based on other questions (this, this, and this) that suggest some ACPI settings, I've tried sudo shutdown -h now to see whether the shutdown console text display offers any hints, but the system doesn't even get that far - it still freezes while the screen shown the desktop background image, without any toolbars. Only sudo shutdown --force works, but that's not a solution. Editing the grub menu to add acpi=off to the kernel didn't help. I guess there's not much point in trying the other (lesser) ACPI suggestions? Adding noapic to the grub entry had no discernible effect. Adding nolapic instead did something (I had removed the quiet option) - the system managed to continue further with the shutdown, right until the line Checking for running unattended-upgrades: which were the last characters on the screen. I've also checked the system BIOS, especially regarding power options, but didn't see anything out of the ordinary. Switching the BIOS standby setting from S3 to S1 didn't help. The standby setting can't be disabled, and there are no other ACPI-related settings AFAIK. BIOS reset didn't help. Not surprised; hadn't changed anything. I tried going to a virtual console (CtrlAltF1) as suggested by djeikyb and from there did a shutdown -h now and it froze there too, after this console output. I didn't try killing processes one at a time because I'm still too newbie to figure out how to do that. Booting with kernel 2.6.35.22 rather than 2.6.35.25 didn't help. Disabling the Nvidia drivers didn't help. Booting from Live CD (USB stick in fact) didn't help; it freezes the same way. Booting from Live CD, with acpi=off noapic nolapic didn't help either. Neither did just nolapic. So evidently this is not some custom setting in my install, but some sort of basic issue. MemTest competed in 1 hour without errors.

    Read the article

  • SEO effects of intermix of WP blog, custom PHP site and FB app game

    - by melbournetechlover
    We're a melbourne tech company in the process of building a custom site in PHP. We plan to launch a "pre-launch" page which is also custom coded (CSS3 on twitter bootstrap framework + HTML5 front end and PHP back end). On that site will be a link to a blog - the idea behind this is to build up ranking for a variety of relevant keywords prior to the full site going live (given the majority of the site is a member only community anyway so the blog is really the main way we'll be able to execute on-site SEO. Ideally, we would like to install wordpress in a subdirectory on our servers and just customise the header to look the same as the landing page of the website. But some questions and concerns... Is there any detrimental effect on SEO efforts in having two separate systems (one custom PHP, the other an installation of wordpress) to manage the blog vs the rest of the site? Are there any benefits or detriments to installing on a sub domain such as blog.sitename.com vs. sitename.com/blog. My preference would be sitename.com/blog as it feels neater - but open to suggestions based on knowledge of Google preferences. Separately, we are building a Facebook app which is under another site name. Again because we are launching this app first, from an SEO perspective, would it actually be better to run it from a sub domain on the main site - e.g. gamename.mainsitename.com instead of on app.gamename.com? Currently we have it on app.gamename.com, but if there are SEO benefits to moving it to the other domain and server then we'll do it. Basically we don't want to have our SEO efforts divided - will Google algorithms prefer two sites heavily referring traffic, or is it better to focus our efforts on one. I guess that's the crux of the issue. But the other one is - does Google care about traffic accessing a page built for the Facebook app iFrame - does that count toward rankings? Sorry I hope these questions aren't too complex - but we're in the tech world every day and still can't seem to find a good answer to these ones...hence I'm taking to the forums!! Free beer for whoever can give me a solid answer!

    Read the article

  • Top down space game control problem

    - by Phil
    As the title suggests I'm developing a top down space game. I'm not looking to use newtonian physics with the player controlled ship. I'm trying to achieve a control scheme somewhat similar to that of FlatSpace 2 (awesome game). I can't figure out how to achieve this feeling with keyboard controls as opposed to mouse controls though. Any suggestions? I'm using Unity3d and C# or javaScript (unityScript or whatever is the correct term) works fine if you want to drop some code examples. Edit: Of course I should describe FlatSpace 2's control scheme, sorry. You hold the mouse button down and move the mouse in the direction you want the ship to move in. But it's not the controls I don't know how to do but rather the feeling of a mix of driving a car and flying an aircraft. It's really well made. Youtube link: FlatSpace2 on iPhone I'm not developing an iPhone game but the video shows the principle of the movement style. Edit 2 As there seems to be a slight interest, I'll post the version of the code I've used to continue. It works good enough. Sometimes good enough is sufficient! using UnityEngine; using System.Collections; public class ShipMovement : MonoBehaviour { public float directionModifier; float shipRotationAngle; public float shipRotationSpeed = 0; public double thrustModifier; public double accelerationModifier; public double shipBaseAcceleration = 0; public Vector2 directionVector; public Vector2 accelerationVector = new Vector2(0,0); public Vector2 frictionVector = new Vector2(0,0); public int shipFriction = 0; public Vector2 shipSpeedVector; public Vector2 shipPositionVector; public Vector2 speedCap = new Vector2(0,0); void Update() { directionModifier = -Input.GetAxis("Horizontal"); shipRotationAngle += ( shipRotationSpeed * directionModifier ) * Time.deltaTime; thrustModifier = Input.GetAxis("Vertical"); accelerationModifier = ( ( shipBaseAcceleration * thrustModifier ) ) * Time.deltaTime; directionVector = new Vector2( Mathf.Cos(shipRotationAngle ), Mathf.Sin(shipRotationAngle) ); //accelerationVector = Vector2(directionVector.x * System.Convert.ToDouble(accelerationModifier), directionVector.y * System.Convert.ToDouble(accelerationModifier)); accelerationVector.x = directionVector.x * (float)accelerationModifier; accelerationVector.y = directionVector.y * (float)accelerationModifier; // Set friction based on how "floaty" controls you want shipSpeedVector.x *= 0.9f; //Use a variable here shipSpeedVector.y *= 0.9f; //<-- as well shipSpeedVector += accelerationVector; shipPositionVector += shipSpeedVector; gameObject.transform.position = new Vector3(shipPositionVector.x, 0, shipPositionVector.y); } }

    Read the article

  • Fuji camera "mounts" but folder not in Dolphin After Kubuntu 13.10 upgrade

    - by user207207
    Fuji camera mount reported in attached devices but not visible in Dolphin After Kubuntu 13.10 upgrade Have reinstalled the driver, and a few other suggestions, for other cameras mounts failing on previous Ubuntu upgrades. I have already spent a couple of hours trying to get my photo's off the camera, very annoying. Worked perfectly in 11.04, 11.10, 12.04, 12.10 and 13.04. dmesg | tail; lsusb; lsb_release -a [ 6181.858786] CPUM: APIC 03 at 00000000fee00000 (mapped at ffffc90009400000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396236] CPUM: APIC 00 at 00000000fee00000 (mapped at ffffc90000c6a000) - ver 0x80050010, lint0=0x10700 lint1=0x00400 pc=0x00400 thmr=0x10000 [17261.396239] CPUM: APIC 03 at 00000000fee00000 (mapped at ffffc90000c72000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396241] CPUM: APIC 02 at 00000000fee00000 (mapped at ffffc90000c70000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [17261.396255] CPUM: APIC 01 at 00000000fee00000 (mapped at ffffc90000c6e000) - ver 0x80050010, lint0=0x10700 lint1=0x10400 pc=0x00400 thmr=0x10000 [32456.884907] usb 2-5: new high-speed USB device number 2 using ehci-pci [32457.654046] usb 2-5: New USB device found, idVendor=04cb, idProduct=01e8 [32457.654050] usb 2-5: New USB device strings: Mfr=0, Product=2, SerialNumber=3 [32457.654052] usb 2-5: Product: Digital Camera [32457.654053] usb 2-5: SerialNumber: 4C3230302020091117CAA59WP18548 Bus 002 Device 002: ID 04cb:01e8 Fuji Photo Film Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 2013:024f PCTV Systems nanoStick T2 290e Bus 001 Device 002: ID 046d:082d Logitech, Inc. HD Pro Webcam C920 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub No LSB modules are available. Distributor ID: Ubuntu vissibleDescription: Ubuntu 13.10 Release: 13.10 Codename: saucy sudo apt-get install gvfs-bin gvfs-mount gphoto2://[usb:002,002] Error mounting location: Error initializing camera: -108: No such file or directory ...... I have reported a bug in Dolphin, which has been transferred to Solid. Further information : I ran solid-hardware list details udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:04.1/usb2/2-5' parent = '/org/kde/solid/udev' (string) vendor = '04cb' (string) product = 'Digital Camera' (string) description = 'Camera' (string) Block.major = 189 (0xbd) (int) Block.minor = 137 (0x89) (int) Block.device = '/dev/bus/usb/002/010' (string) Camera.supportedProtocols = {'ptp'} (string list) Camera.supportedDrivers = {'gphoto'} (string list) I still can't get my photo's off, I can see the folders using the Gimp menu. If anyone has got any ideas, I'm willing to try them.

    Read the article

  • Wifi problems after upgrading to 13.10

    - by Simon
    I just upgraded to Ubuntu 13.10, but since the upgrade I don't have internet access via wifi anymore. I can: See networks Connect to a network Ping myself (localhost, 192.168.0.103) I can't: Ping others (including other devices on the same wireless network, including the gateway/router) Resolve hosts Access any other external resource, whether on my own network or on the internet Using Wireshark, I noticed my computer is continuously sending ARP-requests like "Who has 192.168.0.1 [which is the gateway]? Tell 192.168.0.103". It doesn't get any replies though. When I ping another IP-address for which it knows the mac-address (from cache), it turns out a packet loss of 90% occurs, and even if a packet manages to arrive it takes around 3000ms. The output of route -n is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth1 192.168.0.0 0.0.0.0 255.255.255.0 U 9 0 0 eth1 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Before upgrading, wifi worked fine. Using other devices, wifi still works fine.Resetting the router didn't help. Ethernet still works after upgrading. Any suggestions? Update: I'm using the wl driver. Here's the relevant output of some commands: lspci | grep Wireless 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) cat /etc/modprobe.d/blacklist.conf [...] blacklist mac80211 blacklist brcm80211 blacklist cfg80211 blacklist lib80211_crypt_tkip blacklist lib80211 blacklist b43 cat /etc/rc.local sudo modprobe -r lib80211 sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_wep.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_tkip.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_ccmp.ko sudo modprobe wl exit 0 The last lines are probably how I got wireless working after the previous upgrade (wireless has been a problem after each upgrade). Update 2: added information about the exact hardware below. The hardware is an integrated device, so I ran lspci -nn | grep -i network. The output is: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)

    Read the article

  • Ubuntu 12.4.1 failing in vm both Vbox and Vmware on new HP Envy 4t-1000

    - by Chas
    Brand new to Linux, getting frustrated trying to get an environment up with Ubuntu. My primary goal is to learn Linux and Apache/PHP development. I need to keep my Windows OS as main on my machine for work, so i'm trying to virtualize Ubuntu 12.4.1 without luck (many attempts). I have a new HP Envy 4t-1000 with 16gb ram, and 32 gb ssd caching with 500gb spindle hard drive. Graphics card is an Intel HD 3000 with AMD Radeon 7670M. With installing Ubuntu desktop in VBox, I'm getting this result: https://forums.virtualbox.org/viewtopic.php?f=6&t=51939 With VMware workstation 7 (patched), I complete the install of Ubuntu, it reboots, purple desktop briefly flashes then it drops to command line. I bought a beginning Ubuntu book, and it recommends trying to manually configure graphics if this happens. So I tried doing a safe boot holding shift - I get to the first screen (GRUB) loads fine, and I choose recovery mode. After choosing the recovery mode, I get the recovery mode options, and can arrow down to what the book suggests 'Run in fail safe graphic mode.' Once I select this option, I get a black screen with a large white dialogue box, at the top it says "The system is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself." Then there is an ok button way down at the bottom. When I select 'ok' I get a menu for a few options, book recommended 'reconfigure graphics.' When I try this, I get a menu of two options: 1) "Use generic (default) configuration or 2) use backup. I've tried both options several times, hitting ok just refreshes screen and nothing more. Rebooting at this point just goes back to command line as before. I don't know what to do at this point, I've spent too many hours this weekend trying in both VBox and VMware to get Ubuntu going. Isn't there like a very basic graphic display or something I can use to at least get into the desktop? I explored the GRUB some more, and tried to look at the startup and xserver logs - both are blank. No help there I guess? When I try to choose 'Edit the configuration file, then 'ok' screen just refreshes on same menu options, nothing happens. thx for any advice. I really need to focus on learning Linux, Apache and PHP, so perhaps Ubuntu just won't work on my hardware? Any other suggestions? I will need to virtualize - THANKS for any help/advice.

    Read the article

  • Strategy for avoiding duplicate object ids for data shared across devices using iCloud

    - by rmaddy
    I have a data intensive iOS app that is not using CoreData nor does it support iCloud synching (yet). All of my objects are created with unique keys. I use a simple long long initialized with the current time. Then as I need a new key I increment the value by 1. This has all worked well for a few years with the app running isolated on a single device. Now I want to add support for automatic data sync across devices using iCloud. As my app is written, there is the possibility that two objects created on two different devices could end up with the same key. I need to avoid this possibility. I'm looking for ideas for solving this issue. I have a few requirements that the solution must meet: 1) The key needs to remain a single integral data type. Converting all existing keys to a compound key or to a string or other type would affect the entire code base and likely result in more bugs than it's worth. 2) The solution can't depend on an Internet connection. A user must be able to run the app and add data even with no Internet connection. The data should still resolve properly later when the data syncs through iCloud once a connection is available. I'll accept one exception to this rule. If no other option is available, I may be open to requiring an Internet connection the first time the app's data is initialized. One idea I have been toying around with in my head is logically splitting the integer key into two parts. The high 4 or 5 bits could be used as some sort of device id while the rest represents the actual key. The fuzzy part is figuring out how to come up with non-conflicting device ids that fit in a few bits. This should be viable since I don't need to deal will millions of devices. I just need to deal with the few devices that would be shared by a given iCloud account. I'm open to suggestions. Thanks.

    Read the article

  • Does it make the game more fun when the user is forced to progress through the levels sequentially rather than letting them pick and play?

    - by BeachRunnerJoe
    Hello. For the first time in my game, I'm stuck with a real design dilemma. I guess that's a good thing ;) I'm building a word puzzle game that has five levels, each with 30 puzzles. Currently, the user has to solve one puzzle at a time before moving to the next. However, I'm finding the user occasionally gets stuck on a puzzle, at which point they can no longer play until they solve it. This is obviously bad because many people will probably just quit playing the game and delete the app. The only elegant solution I can find to helping the player get unstuck is changing the design of the game to allow the users to pick any puzzle to play at any time. This way, if they get stuck, they can come back to it later and at least they have other puzzles to play in the meantime. It's my opinion, however, that this new flow design doesn't make the game as fun as the original flow design where the player has to complete a puzzle before moving to the next. To me, it's like anything else, when you only have one of something, it's more enjoyable, but when you have 30 of something, it's far less enjoyable. In fact, when I present the user with 30 puzzles to choose from, I'm concerned I might be making them feel like it's a lot of work they have to do and that's bad. I even had a tester voluntarily tell me that being forced to complete a puzzle before moving to the next is actually motivating. My questions are... Do you agree/disagree? Do you have any suggestions for how I can help the player get unstuck? Thanks so much in advance for your thoughts! EDIT: I should mention that I've already considered a few other solutions to helping the user get unstuck, but none of them seem like good ideas. They are... Add more hints: Currently, the user gets two hints per puzzle. If I increase the hint count, it only makes the game more easy and still leaves the possibility of the user getting stuck. Add a "Show Solution" button: This seems like a bad idea because it's my opinion this takes the fun out of the game for many people who would probably otherwise solve the puzzle if they didn't have the quick option to see the solution.

    Read the article

  • ATI Radeon HD7000 Series (Laptop) - Switch Mode Between ATI & Intel Integrated GPU. Stuck on Boot Screen On Intel GPU Selection Mode

    - by Monkey Drone
    Laptop Specs: HP Pavilion G6-2020SE GPUs 1) ATI HD7000 Series 2) Intel Integrated OS Installed: x) Ubuntu 12.04 (64 bit) i) ATI Graphics Card Drivers Installed From AMD website. Note: Graphics Card Drivers are Working Fine in 3D Mode. It runs a little Hot as it should since its a GPU. Observation) AMD Catalyst Control Centre Lets me Choose If I want to run the system in HIGH-END (ATI GPU) OR Intel Integrated (Better battery life) While I am on High End GPU Choice, Ubuntu works fine. Problem) But when I switch to Intel Mode in the AMD CCC and reboot the Machine. Ubuntu goes into 'Low Graphics Mode'. The problem is not that it goes into low graphics mode, it is completely expected since I am no longer using the ATI GPU but the integrated Intel GPU. Problem starts with the 'Selection' of the options. During that screen, I have no mouse on the screen (even tried plugging in an external USB mouse) & No Keyboard functionality. Thus I am left completely disabled to choose any option and load into Ubuntu. The Only thing I can do is switch to a terminal and enable ATI GPU through command-line and Ubuntu works Fine again. Is it a bug that there is no mouse/keyboard available to me during the startup of Ubuntu when its launched in Low-Graphics Mode? Any suggestions on how to pass through that? My palms are sweating as I write this down because the ATI GPU is really heating up my laptop. I dont want to boot into Windows or keep it around any longer than necessary. Please advise with help and directions. Sincerely, MonkeyD Edit1: The Answer by Celso has helped me switch to Intel, thus giving me sufficient battery power. Kudos to Celso. Now I can at least use my laptop for the time being without having it burn hair off my skin. I am still looking for answer to my original question of, 'why is lightdm not working properly when I switch to Intel GPU using ATI HD7000 series official drivers provided by AMD'.

    Read the article

  • What is a useful pattern to maintaining an object state in a one to many relationship?

    - by ahenderson
    I am looking for a design for my application, here are the players(classes) involved. struct Transform { // Uses a matrix to transform the position. // Also acts acts as the state of a Dialog. Position transform(Position p); //other methods. }; struct Dialog { // There are multiple dialog for the user to transform the output. Transform& t; void ChangeTranformation(){t.rotate(360);} } struct Algorithm { //gives us a position based on an implementation. For example this can return points on a circle or line. Transform& t; Position m_p; Dialog& d; Position GetCurrentPosition(){ return t.transform(m_p);} //other methods. } Properties I need: Each algorithms has one dialog and each dialog can have many algorithms associated with it. When the user selects an algorithm a dialog associated with that algorithm is displayed. If the user selects a different algorithm then re-selects back the state is restored in the dialog. Basically I want a good design pattern to maintain the state of the dialog given that many algorithms use it and they can be switched back and forth. Does anyone have any suggestions? Here is a use case: Dialog1 has a single edit box to control the radius. Algorithm1 generates points on a unit circle. Algorithm2 is the same as Algorithm1. The user has selected Algorithm1 and entered 2 into the edit box. This will generate points on a circle of radius 2. The user then selects Algorithm2 and enters 10 into the edit box of Dialog1. This will generate points on a circle of radius 10. Finally Algorithm1 is selected again. The edit box of Dialog1 should show 2 and points on a circle of radius 2 should be generated.

    Read the article

< Previous Page | 300 301 302 303 304 305 306 307 308 309 310 311  | Next Page >