Search Results

Search found 8398 results on 336 pages for 'live coverage'.

Page 305/336 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >

• Preinstalled Windows 8 and Linux UEFI dual boot on a laptop

  - by itchy355

  I am trying to set up Windows 8 and Arch Linux on a new Sony Vaio E14 with preinstalled windows 8. So far: installed W8 to my new SSD (switched for the original HDD) using Recovery Media shrunk the W8 partition, deleted recovery partition, disabled swap confirmed W8 booting just fine On to Arch: disabled Secure Boot in bios confirmed W8 booting just fine Booted Arch off the CD and installed everything to 4th and 5th partition set up rEFInd for EFIstub kernel bootloader After that it got worse. I was unable to boot anything else than Windows 8 (although I was glad that they at least kept working just fine). Tried: creating EFI\refind\ and putting the .efi there (as per Arch manual overwriting EFI\boot\bootx64.efi overwriting EFI\Microsoft\Boot\bootmgr.efi overwriting EFI\Microsoft\Boot\bootmgfw.efi --- YAY rEFInd shown up! So far, so good. I've kept the whole W8 Boot\ directory in EFI\windows8 and set up a boot menuentry for it; and it booted just fine. But, upon restart, everything was wrong -- 'Operating system not found' instead of any bootloader (refind or w8). Booted back into Arch using the live CD to find out that the EFI partition had erroneous FAT table. fsck.vfat fixed it, and I've found that EFI\Microsoft\Boot was back to it's original state (all refind files deleted and replaced with W8 bootloaders). I've overwritten them again and got back to rEFInd showing up correctly and Arch being perfectly bootable. After that I've tried only renaming EFI\Microsoft\Boot\bootmgfw.efi to bootmgfw.001.efi (then copying refind's .efi to bootmgfw.efi and keeping EVERY OTHER file as it was), but with exactly the same result. Tried marking the GPT EFI partition as read-only, same result. Now I'm kinda out of luck. Arch boots fine, so does W8 but it destroys the EFI partition in the process. Thanks for any ideas, Googling brought me this far and I can't find any better. PS -- windows 8 MAYBE destroys the partition upon shutdown -- when I order a shutdown in W8, it takes unusually long (about half a minute instead of ~5 seconds). So in theory I could solve this by hard-resetting the laptop instead of a normal shutdown, but that's just not nice.

  Read the article

• Windows 7 laptop constantly dropping internet connection

  - by Corbin Holbert

  I have scoured the web for an answer and failed to find one. I am using a Toshiba Satellite laptop running Windows 7 64-Bit. I have the computer connected via Wifi. Now, I am no beginner with the Internet, or anything related to computers, as I have grown up teaching everyone around me how to use computers, and went to college for IT. Everything on my network works flawlessly at all times, except for this evil laptop. The worst part is that I fixed this once before a few years back and recently had to replace the hard drive and re-install the OS, but cannot for the life of me remember what I did to make this problem go away. I am in my browser, connected to the Internet. I click a link. Suddenly no internet access. All I do is click down on the WiFi connection in the task bar, disconnect and reconnect immediately. Internet is back the moment I hit "connect." I have read many people had the same issues as I am having, but they all had triggers or other network issues. I have no trigger (this happens literally five to six times per minute no matter what I am doing) and I have no problems with my router, modem, or any other devices or computers on said network. As I am a web designer, and like to test my work live at every turn- this is going to result in this laptop being in pieces if I can't get it fixed soon. If more info is needed, let me know and I will provide. Thanks for any help offered! EDIT: Network Card: Realtek RTL8188CE Wireless LAN 802.11n PCI-E NIC Network state reads as "No Internet Access" when the problem first occurs, then magically I have Internet access for about ten seconds once I disconnect and reconnect. I have turned off IPV6, I have turned off power saving options for the network adapter, no viruses. Any new ideas? Also, I had to disconnect and reconnect four times just to get to this edit screen- and will likely have to do the same just to post it- it's that bad.

  Read the article

• Where to get laptop replacement parts?

  - by wai

  I am sure some of us have older laptops that still works but just one or two parts started not working very well. However, to send it back to the manufacturer for repair might not be worth the money (as some of them even charge consultation fees just to have it checked) as these old laptops are most probably well beyond warranty. Replacing these one or two parts could give your laptop a new lease of life. For example, I have a Dell Inspiron 640m which the fan recently failed. Everything else still works. I know enough to open up the laptop (after reading the service manual) and put it back together again, hence a replacement fan could save it. However, finding these parts turned out to be difficult. I guess I wouldn't be able to get it from Dell since I have been searching around the Dell forums and concluded if I were going to get Dell to at least talk to me, I would have to pay some money (since my warranty expired). I found this online:- http://www.parts-people.com/index.php?action=item&id=3725 However, as I don't live in the United States, shipping alone would cost me 3 times more than the part in question. In addition, if there's a problem, it would be difficult because I probably would have to mail the parts back (costing more money). One of my friend spilled water on her Macbook, she sent it back to Apple and they told her the cost of repairing it exceeds that of buying a new Macbook. They probably have to change everything except the LCD screen. I opened it up and found that most of the parts are still working, only the RAM had fried. Replaced it and it's working again. For some time before discovering only the RAM fried, I was toying with the idea of replacing the logic board myself but looks like I didn't have to. =) Now I know there's a site for Macbooks used replacement parts:- http://www.ifixit.com/ The question is, does anyone know where to get replacement parts at their own locality? It might benefit the community as a whole. Someone might know a local computer store that sells precisely just the things we needed (for now, I hope to find a shop that sells just the fan). If you own a laptop which you had an easy experience finding the replacement parts, do post that as well. PS: I wish laptop manufacturers have outlets where they sell these replacement parts (or at least let you place an order).

  Read the article

• Partition table is corrupt

  - by Tim

  I have a corrupt the partition table on the laptop that is running Ubunutu 10.4. Before the partition table was corrupt I had the following partitions: 2 primary partitions: 1st - NTFS 2nd - Extended 4 logical partitons that are built within 2nd extended: 1st NTFS (68 Gib) 2nd Linux (19 Gib) 3rd Swap (1.4 Gib) 4th Linux (24 Gib) The physical order of these partitions was the following: ( 4th Linux ) - ( 1st NTFS ) - ( 2nd Linux ) - ( 3rd Swap ) The logical order of the partition was different: ( 1st NTFS ) - ( 2nd Linux ) - ( 3rd Swap ) ( 4th Linux ) NTFS partition was big and it resided between 2 Linux partitions, neither of these partitions had enough space to install Oracle 11g for my project with prof. Gamper and Markus Innerebner. Therefore, I decided to a) either move the NTFS partion to the left or b) remove it completely and extend partition where Linux resides. As I tool I have chosen GParted. But unfortunately it was not able to move the partition because he found that in NTFS partition there are some blocks that are referenced multiple times. Also it was not able to remove the partition neither, because in this case the partitions that follow it ( 2nd Linux ) - ( 3rd Swap ) have to be in his opinion also removed, because the organization of extended partition is a linked list. Since GParted was not able to do such thing I was trying to find another tool. I found diskdrake tool on PSLinuxOS distribution of linux. That tool silently deleted ( 1st NTFS ) partition and I thought that everything was fine. But diskdrake has damaged the partition in a way that I am not able either to boot from the hard disk nor to see the partitions with GParted and even with diskdrake itself! Fortunately I have a live CD of Ubuntu 8.10 and I am able to boot and see hard disk. I have 2 ideas how I can solve the problem: 1) Manually change disk partitions and point them to the correct partitions. 2) Create partition table with GParted that as much as possible is the same with the previous one I find the 2nd approach less time consuming but some data will be lost because of it is not possible to place borders of the partitions exactly how it was before. And moreover I am not sure if such approach would work, for example, if the OS is able to locate files after repartitioning. I feel like that it will but not 100% sure. Are there some ideas how the problem may be solved?

  Read the article

• Need Windows XP VGA driver for i3 Haswell

  - by AFH

  Background: I have recently upgraded my hardware because the previous Pentium system started failing to the point that it would not run long enough to boot. It was obviously a hardware fault, but I had no way of knowing whether it was in the motherboard, CPU or memory. Not all the components were now available, so I decided to replace all three. In order to get some benefit from the expenditure, I though I would put in faster components, and for future-proofing went for recently released ones: MSI Z87-G41-PCMate and Intel i3-4130 with 4400 HD graphics. The system performs excellently with Ubuntu 13.10, so I know there are no hardware problems, but I need to continue running XP because it runs several thousand pounds (UK) worth of software, which meets my needs more than adequately: in some cases there is no longer support for later Windows releases, and in most others an expensive and to me unnecessary upgrade is required. Problem: The motherboard specifications claim Windows XP support for the live driver update utility, which misled me into believing that XP drivers were available. Not true: Intel have apparently refused to provide XP drivers for Haswell chips. The update program runs on XP, but finds no suitable Intel drivers. The system is more or less running on the default fail-safe VGA driver, but DirectX will not load, which stops a number of my applications from running. I have been trawling the internet for a month now, but I have not found a graphics driver which will load successfully: all show "This device cannot start. (code 10)". I don't need HDMI support: my monitor is 1280x1024 and connected through the VGA port, so all I need is a driver which will handle this resolution well enough to support DirectX. Has anyone found a driver which will do this? Please don't reply with information found from internet searches, unless you have actually solved this problem: be assured that I have been all round the houses looking at solutions which others have reported as working, but none of them does for me. Incidentally, I did find an Intel HD sound driver which XP accepts (winxp_145111.exe from Intel), though without connecting to an HDMI port on a TV or sound system I have no idea if it works in practice. However, the graphics section of the same driver fails, like all the others I've tried.

  Read the article

• How can I play my MP3 files through my stereo system?

  - by Joel Coehoorn

  Here's the situation. Like many others I have my entire CD collection ripped to my PC, along side other music I've acquired through iTunes or Amazon MP3. Also like many others the speakers at my PC are underpowered, and likely included in my monitor as an afterthought. This is fine for most use: system sounds, YouTube, etc. Even games sounds and music. But I'd like something a little better for when I really want to listen to music. And I have it; in the next room — barely 25 feet away as the crow flies — sits a nice 400 watts stereo system. The stereo supports MP3 CDs, so up to this point I've just kept a few CD-RW disks around to keep most of my collection available. But it's time to move on to something a little more sophisticated. What are my options for using the MP3 files available on my computer as an input for this stereo? Some notes: I want to be able to control what song the stereo is playing without having to go to the PC, including setting up and retrieving playlists. Ideally this should even be able to wake the PC from sleep mode to start playing. I primarily use Windows Media Player on the PC (which runs Windows Vista). However, the files themselves live on a server running Windows Server 2008, and so I could also install something on the server and run everything from there. The axillary input on the stereo is unfortunately limited to a 1/8 inch stereo mini-plug. I'm loath to run wires across two rooms, and I'm considering moving the stereo to the garage at some point. Therefore a wireless solution that can easily cover about 100 ft or so is preferred. I already have a Wi-Fi network ready, but it's secured so anything using Wi-Fi should make it easy to set up security. Bonus points for doing it in under $85 shipped at Amazon (I'm hoping to pay for this via $85 worth of Amazon gift cards). I know this a pretty tight budget, so just getting close is okay. Bonus points for something that remembers multiple profiles (keep my favorite songs separate from the wife's). Bonus points for a remote that can also replace my stereo remote, so I only need one device to control everything. I'm not holding my breath on this one given my price range, though. Bonus points if I can also use for Internet radio. Doing some research on my own as well. This looks like it'll do exactly what I want, but it lists at an outrageous $299: http://www.linksysbycisco.com/US/en/products/DMP100

  Read the article

• Windows 7 file-based backup service

  - by Ben Voigt

  I'm looking for a good replacement for Lazy Mirror, since it doesn't support Windows 7 well. Pros: One of the things I really loved about Lazy Mirror is that it always maintains a "full" backup, but does so by only copying modified files. As each file was copied, the old version got archived (moved to an out-of-the-way location). So after mirroring ran, there'd be a complete copy of the file system, which could even be booted if necessary. At the same time, extra space on the backup media was used to store as many older versions of files as possible, without wasting space storing multiple copies of the same version. It seems that with Windows 7 backup, there'd be wasted space storing the same data in both the system image and file backup. It was completely file-based, but also aware of the registry (it had a feature to dump the live registry to hive files in the correct format). The backups were normal NTFS filesystems, no special tool was needed to read them. It automatically cleaned out the oldest previous versions when space ran out (unlike Windows 7 backup which apparently simply starts failing the the backup media fills.) It copied all file attributes including security. Cons: It doesn't deal well with junction points, symbolic links, and hard links. It didn't run as a service without lots of help from firesrv or srvany, and then you couldn't interact with the GUI. Running as a service was necessary to be able to mirror protected OS files. It didn't have open file handling, except for registry hives. I guess that the file-by-file archive and replacement could leave mismatched sets of files, if the mirror was interrupted. This would be the advantage of incremental backup techniques that require old full backup + all intermediate incremental backups to restore. But I don't see this as presenting much of a problem, you'd really only have a boot failure if you had a mixture of pre- and post-service pack files, and I can run a full image backup using another tool before applying a service pack. Does anyone know of a tool that does both full-system backup and storage of old versions of files like Lazy Mirror did (without storing the same data multiple times), and also can run as a service in Windows 7? Free is best of course, but a reasonably priced paid program (e.g. It would be absolutely awesome if it also triggered a backup/mirror pass when a particular external drive was plugged in and generated popup warnings if backups hadn't been run recently)

  Read the article

• Is Steam for Mac effectively running as superuser?

  - by godDLL

  When you download the client it does not weigh too much, and seems to do very little. Inside the app bundle there is a script that—upon inspecting the environment and deciding you're not running Linux—launches the client, which downloads the full support environment and resources. For this to happen (all of this is saved inside the bundle, the app bundle gets updated in this process) Steam wants Universal Access for Assistive Devices, and your password. Cacheable resources, preferences (like keyboard shortcuts), support files (like game hardware requirement lookup tables) live inside the bundle, not in ~/Library/{Application Support|Preferences|Cache}; games' data get dumped into ~/Documents/Steam Content. I'd describe myself as a bit OCD (which really says a lot), and I wouldn't care that much still. I'd go comb this hairy mess and find out where stuff is, when and if I need to, even if it's in an unfamiliar place; that does not actually tick me off. Well, a little bit. What makes me concerned is the way Steam needs both Access for Assistive Devices, and my password to run. The former gives it the ability to talk very intimately with running apps and the underlying system; while the latter (admin account) could very well give it and it's publishers unrestricted access to all my software, hardware and data. With publishers like Rockstar using scene NOCD cracks to publish their games on Steam, I'm not so sure I'm OK with this. I'd like more games made available for the MacOS X and all the pretty machines that run it, but this arrangement does not seem very Mac-like to me. It looks like Valve is going around system security measures and best practices, foregoing sandboxing, code signing, relatively sane structured organization; all the things that would appeal to someone who's no fun at parties at all, and will die alone, in his long dead mother's basement… wait. Right. Anyway. Can we get some input on Steam for Mac security at the end-user machine, from someone who understands how Accessibility API works, whether games distributed on Steam can read and write outside the user homefolder, collect data from other running apps, or similar?

  Read the article

• Restore single users Exchange 2003 mailbox from backup

  - by Campo

  I take weekly backups of exchange in full. I also take complete weekly backups of the entire server. It is a Server 2003 R2 with AD and Exchange 2003 all on one box. One users inbox has disappeared. She has 19000+ junk items now. It is possible the inbox got mixed into the junk. Regardless it is such a huge mess she is not going to go through all of that.... I want to restore he mailbox from the backup. I followed this MS KB http://support.microsoft.com/kb/823176 I had to use Method 3. I have a VM of Server 2003 R2 with exchange but I am having failures on the restore from NT backup. The backup log just states to check the application log.... Application log points to backup log... Only info Is failed to restore Only thing different is the computer name... The only error I can find is in the Application log. Information Store Database not found All others just say that the backup failed. Any assistance is greatly appreciated. UPDATE I have successfully proven I can restore the DB into a recovery storage group in my VM Unfortunately due to the actual account being on a different store I am unable to do the recovery... Error is The attempt to log on to the Microsoft Exchange Server computer has failed. The MAPI provider failed. Microsoft Exchange Server Information Store ID no: 8004011d-0512-00000000 Two questions QUESTION 1 Should I repeat my steps on the production exchange server in the recover storage group? then merge into her original account? I am just concerned with doing recovery like that on the live server.... QUESTION 2 Is there any way I can extract her .PST from my recovery VM and then import into her outlook? On the Recovery VM: I restored the raw DB from my full backup repaired it with ESEUTIL then mounted in the recovery store. Was thinking I could just repeat and mount in the main store on the VM? Thanks for the suggestions.

  Read the article

• Where to get laptop replacement parts?

  - by wai

  I am sure some of us have older laptops that still works but just one or two parts started not working very well. However, to send it back to the manufacturer for repair might not be worth the money (as some of them even charge consultation fees just to have it checked) as these old laptops are most probably well beyond warranty. Replacing these one or two parts could give your laptop a new lease of life. For example, I have a Dell Inspiron 640m which the fan recently failed. Everything else still works. I know enough to open up the laptop (after reading the service manual) and put it back together again, hence a replacement fan could save it. However, finding these parts turned out to be difficult. I guess I wouldn't be able to get it from Dell since I have been searching around the Dell forums and concluded if I were going to get Dell to at least talk to me, I would have to pay some money (since my warranty expired). I found this online:- http://www.parts-people.com/index.php?action=item&id=3725 However, as I don't live in the United States, shipping alone would cost me 3 times more than the part in question. In addition, if there's a problem, it would be difficult because I probably would have to mail the parts back (costing more money). One of my friend spilled water on her Macbook, she sent it back to Apple and they told her the cost of repairing it exceeds that of buying a new Macbook. They probably have to change everything except the LCD screen. I opened it up and found that most of the parts are still working, only the RAM had fried. Replaced it and it's working again. For some time before discovering only the RAM fried, I was toying with the idea of replacing the logic board myself but looks like I didn't have to. =) Now I know there's a site for Macbooks used replacement parts:- http://www.ifixit.com/ The question is, does anyone know where to get replacement parts at their own locality? It might benefit the community as a whole. Someone might know a local computer store that sells precisely just the things we needed (for now, I hope to find a shop that sells just the fan). If you own a laptop which you had an easy experience finding the replacement parts, do post that as well. PS: I wish laptop manufacturers have outlets where they sell these replacement parts (or at least let you place an order).

  Read the article

• recommendations for efficient offsite remote backup solution of vm's

  - by senorsmile

  I am looking for recommendations for backing up my current 6 vm's(and soon to grow to up to 20). Currently I am running a two node proxmox cluster(which is a debian base using kvm for virtualization with a custom web front end to administer). I have two nearly identical boxes with amd phenom II x4's and asus motherboards. Each has 4 500 GB sata2 hdd's, 1 for the os and other data for the proxmox install, and 3 using mdadm+drbd+lvm to share the 1.5 TB's of storage between the two machines. I mount lvm images to kvm for all of the virtual machines. I currently have the ability to do live transfer from one machine to the other, typically within seconds(it takes about 2 minutes on the largest vm running win2008 with m$ sql server). I am using proxmox's built-in vzdump utility to take snapshots of the vm's and store those on an external harddrive on the network. I then have jungledisk service (using rackspace) to sync the vzdump folder for remote offsite backup. This is all fine and dandy, but it's not very scalable. For one, the backups themselves can take up to a few hours every night. With jungledisk's block level incremental transfers, the sync only transfers a small portion of the data offsite, but that still takes at least a half an hour. The much better solution would of course be something that allows me to instantly take the difference of two time points (say what was written from 6am to 7am), zip it, then send that difference file to the backup server which would instantly transfer to the remote storage on rackspace. I have looked a little into zfs and it's ability to do send/receive. That coupled with a pipe of the data in bzip or something would seem perfect. However, it seems that implementing a nexenta server with zfs would essentially require at least one or two more dedicated storage servers to serve iSCSI block volumes (via zvol's???) to the proxmox servers. I would prefer to keep the setup as minimal as possible (i.e. NOT having separate storage servers) if at all possible. I have also briefly read about zumastor. It looks like it could also do what I want, but it appears to have halted development in 2008. So, zfs, zumastor or other?

  Read the article

• Certain Programs cannot access internet

  - by Cindy

  Operating System: Windows 7 (x64) Problem: Certain Programs are unable to access the internet. They claim that there is no connection when you already are connected. Hello, before we start. Just letting you know I'm new here, and I'm very new to Windows 7. I installed it two days ago. I just installed Windows 7 on my laptop and I have a few problems. I play World of Warcraft, as well as a variety of games. And when I first attempt to log into the game, I get a windows error message, but it doesn't stop there. I thought World of Warcraft got corrupted during the upgrade. It seems that I am unable to access the internet from other online games as well. Most say in along the lines of "Cannot connect to patch server, try again later." I cannot use a downloader Also, I have internet explorer. The x32 version of the browser cannot connect to the internet, and when I try to enter "google.com", it says the same thing. I'm only accessing this site through Internet Explorer x64, which I would have been fine with is it's compatible with Adobe Flash. The only thing that seems to connect to the internet are Internet Explorer x64 and Windows Live Messenger. Here are the steps I have taken, but none worked. 1.) Disable Windows Firewall 2.) Have Windows Firewall Enabled, but allow the specific programs to access internet. And allowed all incoming access. 3.) Disabled UAC, Ran the programs as an admin, and set compatibility to Vista. 4.) Uninstalled an anti-virus program. (McAffee Security Suite 2010) 5.) Reinstalled the programs 6.) Reinstalled Windows 7 7.) Retaken the steps on the Administrator account. Please assist me in this problem. I need to get back into the game. Thanks so much in advance.

  Read the article

• DVD ROM is not working

  - by Cyril N.

  (note: I don't know in which StackExchange site to put this question, I'll thank the moderator that will move it to a more appropriate place, if there is a S.E. available for my question). I have a DVD RW drive that is well listed in the bios, and if no CD is in, it is also present in the "My Computer" of my Fedora 16. But when I put a disc on it, the icon disapear from "My Computer", and I can not do anything with this ! (Like erasing a RW disc). I'd like to boot a Fedora 17 Live CD image. I burned it on an other computer but when I try to run it in bios, nothing is done and I'm redirected to Grub of my HD. The command cdrecord -scanbus shows this : wodim: Warning: controller returns wrong size for CD capabilities page. wodim: Cannot get CD capabilities data. 6,1,0 601) 'HD-DT%ST' 'DVD%RAM G@22NP20' '1&04' Removable CD-ROM And when I try to mount manually the disc, I got this error : mount: block device /dev/sr0 is write-protected, mounting read-only mount: /dev/sr0: can't read superblock Here's a paste of dmesg | grep sr0 : [ 5.161265] sr0: scsi-1 drive [ 5.161621] sr 6:0:1:0: Attached scsi CD-ROM sr0 [ 834.545978] sr0: Hmm, seems the drive doesn't support multisession CD's [ 841.731194] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 842.021640] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 842.021652] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 842.021662] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 842.021672] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 [ 842.021688] end_request: I/O error, dev sr0, sector 0 [ 842.021697] Buffer I/O error on device sr0, logical block 0 [ 842.023715] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 843.048203] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 843.048211] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 843.048219] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 843.048234] end_request: I/O error, dev sr0, sector 0 [ 843.048274] EXT4-fs (sr0): unable to read superblock [ 843.063155] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 843.075904] sr0: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00 [ 843.220512] sr 6:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 843.220522] sr 6:0:1:0: [sr0] Sense Key : Aborted Command [current] [ 843.220530] sr 6:0:1:0: [sr0] Add. Sense: No additional sense information [ 843.220538] sr 6:0:1:0: [sr0] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 843.220553] end_request: I/O error, dev sr0, sector 0 [ 843.220609] FAT-fs (sr0): unable to read boot sector The lines from Sense Key .. (line 6) to DRIVER_SENSE (line 11) are repeating a lot. I then changed my DVD player with an other spare one I had, and the disc didn't boot neither. I then changed the IDE cable, but still no success. What can I do to make it work? Thanks for your help.

  Read the article

• HDD from Mid-2009 MacBook Pro works OUTSIDE laptop, but not INSIDE.

  - by Jaime

  Leading up to the problem: I was working late one night on a Keynote presentation. My battery ran out, and the computer did that hibernation thing it does when there's no battery power. I got my charger, connected it to my computer, and then pushed the power button. It started up for a second in to the gray screen it usually goes to. Then I turned around, tugging the magsafe charger out of the connector on the computer. This caused my computer to shut down again. Now I can't get it to boot at all -- just a blinking folder icon with a question mark in it on boot up. I've tried pretty much everything to deal with this. Multiple forced reboots, resetting PRAM and NVRAM, etc. I booted to original OSX disc and ran disc utility, but I discovered that there is no disc to boot to. I ran the Apple Hardware Test, and it came back 100% good. I booted to an Ubuntu live-boot disc and ran that disc utility, just to see if it recognized a disc at all. It didn't. So I removed the HDD, and replaced it with a bootable volume running BSD. It didn't recognize that HDD either. I then attached my HDD to my computer via an external enclosure with a USB interface. Lo and behold, it booted! So my computer now only work with my HDD attached externally. This means that the HDD is functional. And the AHT returns no hardware malfunctions. So what the hell is going on? … In the meantime: I've put the HDD back into the computer but it still doesn't do anything at all (I'm running it externally right now). I just checked the serial number and my 1 year warranty expired recently, so I can't send it back for repair. … Little Help Thoughts? I've been searching everywhere for leads, but no luck. …

  Read the article

• Setting up a home server - what to use? (ZFS vs btrfs, BSD vs Linux, misc other requirements)

  - by monch1962

  I need to get all our home content off individual machines and onto a central server. What I'd like to have is the metaphorical "server under the stairs". Stuff we need: expandable storage. I want to be able to add extra disc as we go along, with minimal maintenance required. Currently we've got about 3Tb of files we need to host, and that's likely to grow by another Tb every 6-12 months based on recent history. I need to be able to add additional disc with minimal pain needs to store all the media (i.e. photos, video, music) we have, and run services to serve the various devices we have in the house to playback (e.g. DAAP so we can play stuff through iTunes, ccxstream so we can play stuff over XBMC). DAAP and ccxstream are needed now, but we also need to support new standards as they emerge (so a closed-box solution isn't going to work) RAID 5, or something broadly equivalent (e.g. RAID-Z) BitTorrent client ssh, NFS, Samba access snapshot capability (as in ZFS), so we can snapshot individual file systems regularly and rollback when my kids delete their school assignments the day before they're due... ability to recover quickly from power outages (it's not unusual for us to have power outages that last longer than our UPS' batteries) FOSS software a modern distributed version control system running on the box, such as Mercurial Stuff I'd like to have on the server, but can live without: PVR capability, so I could record TV to the box Web server. We currently run a small Web server on a very old box, and I'd ideally like to turn the old box off and move the content to the new server just to save some electricity Nagios + mrtg I've been looking at using a EEE Box as the server, primarily because I can get them cheap and they don't consume much power. The choice of OS and file system is more difficult, from what I've found: I've got most experience with various Linux distros, but am happy to use another Unix FreeBSD and OpenSolaris seem to be the best choices for hosting ZFS OpenSolaris' hardware support is nowhere near as good as e.g. Ubuntu btrfs, while looking very good, doesn't seem ready for prime-time yet ZFS doesn't let you (easily?) add new discs to a RAID5 or RAID-Z reading around, it seems that ZFS is a bit short of tools for recovering lost data At the moment, I'm leaning towards running FreeNAS+ZFS, but I'm concerned about the requirement to be able to add new disc on a fairly regular basis to an existing RAID-Z. Can anyone provide some recommendations, or share experiences? Thanks in advance

  Read the article

• Setting up a home server - what to use? (ZFS vs btrfs, BSD vs Linux, misc other requirements)

  - by monch1962

  I need to get all our home content off individual machines and onto a central server. What I'd like to have is the metaphorical "server under the stairs". Stuff we need: expandable storage. I want to be able to add extra disc as we go along, with minimal maintenance required. Currently we've got about 3Tb of files we need to host, and that's likely to grow by another Tb every 6-12 months based on recent history. I need to be able to add additional disc with minimal pain needs to store all the media (i.e. photos, video, music) we have, and run services to serve the various devices we have in the house to playback (e.g. DAAP so we can play stuff through iTunes, ccxstream so we can play stuff over XBMC). DAAP and ccxstream are needed now, but we also need to support new standards as they emerge (so a closed-box solution isn't going to work) RAID 5, or something broadly equivalent (e.g. RAID-Z) BitTorrent client ssh, NFS, Samba access snapshot capability (as in ZFS), so we can snapshot individual file systems regularly and rollback when my kids delete their school assignments the day before they're due... ability to recover quickly from power outages (it's not unusual for us to have power outages that last longer than our UPS' batteries) FOSS software a modern distributed version control system running on the box, such as Mercurial Stuff I'd like to have on the server, but can live without: PVR capability, so I could record TV to the box Web server. We currently run a small Web server on a very old box, and I'd ideally like to turn the old box off and move the content to the new server just to save some electricity Nagios + mrtg I've been looking at using a EEE Box as the server, primarily because I can get them cheap and they don't consume much power. The choice of OS and file system is more difficult, from what I've found: I've got most experience with various Linux distros, but am happy to use another Unix FreeBSD and OpenSolaris seem to be the best choices for hosting ZFS OpenSolaris' hardware support is nowhere near as good as e.g. Ubuntu btrfs, while looking very good, doesn't seem ready for prime-time yet ZFS doesn't let you (easily?) add new discs to a RAID5 or RAID-Z reading around, it seems that ZFS is a bit short of tools for recovering lost data At the moment, I'm leaning towards running FreeNAS+ZFS, but I'm concerned about the requirement to be able to add new disc on a fairly regular basis to an existing RAID-Z. Can anyone provide some recommendations, or share experiences? Thanks in advance

  Read the article

• Setting up a home server - what to use? (ZFS vs btrfs, BSD vs Linux, misc other requirements)

  - by monch1962

  I need to get all our home content off individual machines and onto a central server. What I'd like to have is the metaphorical "server under the stairs". Stuff we need: expandable storage. I want to be able to add extra disc as we go along, with minimal maintenance required. Currently we've got about 3Tb of files we need to host, and that's likely to grow by another Tb every 6-12 months based on recent history. I need to be able to add additional disc with minimal pain needs to store all the media (i.e. photos, video, music) we have, and run services to serve the various devices we have in the house to playback (e.g. DAAP so we can play stuff through iTunes, ccxstream so we can play stuff over XBMC). DAAP and ccxstream are needed now, but we also need to support new standards as they emerge (so a closed-box solution isn't going to work) RAID 5, or something broadly equivalent (e.g. RAID-Z) BitTorrent client ssh, NFS, Samba access snapshot capability (as in ZFS), so we can snapshot individual file systems regularly and rollback when my kids delete their school assignments the day before they're due... ability to recover quickly from power outages (it's not unusual for us to have power outages that last longer than our UPS' batteries) FOSS software a modern distributed version control system running on the box, such as Mercurial Stuff I'd like to have on the server, but can live without: PVR capability, so I could record TV to the box Web server. We currently run a small Web server on a very old box, and I'd ideally like to turn the old box off and move the content to the new server just to save some electricity Nagios + mrtg I've been looking at using a EEE Box as the server, primarily because I can get them cheap and they don't consume much power. The choice of OS and file system is more difficult, from what I've found: I've got most experience with various Linux distros, but am happy to use another Unix FreeBSD and OpenSolaris seem to be the best choices for hosting ZFS OpenSolaris' hardware support is nowhere near as good as e.g. Ubuntu btrfs, while looking very good, doesn't seem ready for prime-time yet ZFS doesn't let you (easily?) add new discs to a RAID5 or RAID-Z reading around, it seems that ZFS is a bit short of tools for recovering lost data At the moment, I'm leaning towards running FreeNAS+ZFS, but I'm concerned about the requirement to be able to add new disc on a fairly regular basis to an existing RAID-Z. Can anyone provide some recommendations, or share experiences? Thanks in advance

  Read the article

• APC ups es 700 randomly overload

  - by Matteo Mosca

  First of all, I live in Italy, Europe, so keep this in mind for Volt/Watt considerations. Standard voltage in Italian apartments is 220V. In my living room I have 2 APC ups, one being an ES-550 and the other an ES-700 They each have 4 slots for surge protection only, and 4 slots for surge protection + battery backup. Just to give all the information, they both got their battery replaced less than one month ago. The ES-550 works fine, without any problem. On the battery I have connected: Pc Monitor Sony Bravia 46'' 4th slot is empty The ES-700 has the following on battery: Xbox 360 Ps3 (standby when not used) Wii (standby when not used) Netgear 8 port switch (always on) Here's what happens: the ES-700, randomly, but mostly at night when I'm sleeping, goes like "overload", with the constant beep. If I try to shut it off keeping the power button pressed, nothing happens. The only thing that works is unplugging random stuff (sometimes unplugging 1 console works, other times I have to unplug all 4 devices). Every time this happens the problem is "real", meaning the 4 devices become unpowered, so it's not just an "alarm no working properly" problem. While I'm sleeping, of course, the power usage is what described on the list, 2 devices on standy, 1 off and 1 on. Today it happened again while I was playing with my Ps3. I unplugged it, problem went away. I plugged it again, and it kept working fine. I just can't figure out what's the problem. The only additional info I can provide is that this behaviour started after a big power outage last december 26 (a blackout that lasted almost all day) but the "surge protection" part of those UPS should be there for those problems, to leverage peaks when power goes away or gets restored. Another funny thing is, althought it might not be related, for a couple of days after that event the Wii was unable to power on, I thought its power transformer was broken, but then it suddenly started working again. I can be sure it's not the Wii overloading the UPS because the overload happens even if I leave the Wii unplugged. Any suggestion is really appreciated, and I can provide any additional info, if needed, that didn't come to mind right now. Thanks.

  Read the article

• PDF Corruption When Sending with Microsoft Products

  - by Winner

  I have the same PDF corruption problem in two different offices that I am the tech support for. Office 1: Started in the middle of December. PDF received from outside the office and is viewable with no problems. I have no control over how it is created. If it is forwarded to anyone else, the PDF is corrupted. I have forwarded it to multiple people in the office. I have tried viewing with Reader 8, 9, Sumatra and Fox IT. I have tried forwarding to Gmail and their viewer says it is corrupted. If I save the PDF and create a new email, it will be corrupted when sent using Outlook 2003, Outlook 2007, Microsoft Live Mail and Outlook Express. If I create the email using Thunderbird 3, Gmail or the webclient Iclient for IPSwitch IMail it will not be corrupted. I have confirmed the same results when using our IMail SMTP and also Using Gmail as the SMTP server. To be clear, if I created in Thunderbird, Gmail or Iclient and received on any of the MS products, it will be viewable. This office receives PDFs daily from multiple sources. There is only a small subset that are having this problem. So far they problem PDFs are from two different companies they deal with, but not all of the PDFs are bad. Office 2: PDFs are created by a management system. I'm not sure what engine is used to create them. Same exact same issues. At both offices, I noticed that the file size is wrong. One small PDF the proper file size is 12kb for the PDF when it's viewable, when it shows up corrupted it is only 8kb. We handle the email for both offices. Both are POP servers, not Exchange. IMail was updated after these issues start. I have tried different SMTP servers and it still seems to happen only when using Microsoft products to send. Anyone else having problems with PDFs getting corrupted? Any ideas how to find out a resolution?

  Read the article

• Baseline / Benchmark Physical and virtual server performance

  - by EyeonTech

  I am setting up a new server and there are some options. I want to perform some benchmarks and I need your help in determining the best tools and if possible run pre-configured benchmarks designed for SQL servers on Windows Server 2008/2012. Step 1. Run a performance monitor on the current Live SQL server (Windows Server 2008 Virtual machine running on ESXi. New server Hardware rundown: Intel® Server System R1304BTLSHBN - 1U Rack, LGA1155 http://ark.intel.com/products/53559/Intel-Server-System-R1304BTLSHBN Intel Xeon E3-1270V2 2x Intel SSD 330 Series 240GB 2.5in SATA 6Gb/s 25nm 1x WD 2TB WD2002FAEX 2TB 64M SATA3 CAVIAR BLACK 4x 8GB 1333MHz DDR3 ECC CL9 DIMM There are several options for configurations and I want to benchmark some of them and share the results. Option 1. Configure 2x SSDs at RAID 0. Install Windows Server 2008 directly to the 2TB WD Caviar HDD. Store Database files on the RAID 0 Volume. Benchmark the OS direct on the hardware as an SQL Server. Store SQL Backup databases on the 2TB WD Caviar HDD. Option 2. Configure 2x SSDs at RAID 0. Install Windows Server 2012 directly to the 2TB WD Caviar HDD. Install Hyper-V. Install the SQL Server (Server 2008) as a virtual machine. Store the Virtual Hard Disks on the SSDs. Option 3. Configure 2x SSDs at RAID 0. Install VMWare ESXi on a partition of the 2TB WD Caviar HDD. Install the SQL Server (Server 2008) as a virtual machine. Store the Virtual Hard Disks on the SSDs. I have a few tools in mind from http://technet.microsoft.com/en-us/library/cc768530(v=bts.10).aspx. Any tools with pre-configured test would be fantastic. Specifically if there are pre-configured perfmon sets avaliable. Any opinions on the setup to gain the best results is welcome. Thanks in advance.

  Read the article

• ISC DHCP - Force clients to get a new IP address, instead of the being re-issued their previous lease's IP

  - by kce

  We are in the middle of a migration of our DHCP and DNS services from a Debian-based server to a Windows Server 2008 R2 implementation. The Debian server is running isc-dhcpd-V3.1.1. All of workstations are configured to have fixed-addresses between .3 and .40 (the motivation behind that choice is mostly management/political much like here). DHCP leases are given out in the range of .100 to .175. Statically configured servers live in the .200 block and above (which is mostly empty). When we move to the Windows platform, management/political considerations require me to move the IP ranges around again. We would like to keep .1 - .10 reserved for network appliances, switches, and other infrastructure. .200 will remain designated for servers. The addressing space in between should be available to clients and IPs should be dynamically allocated (Edit: instead of automatic as originally mentioned) by the server. My Address Pool on the Windows Server looks like this: 192.168.0.1 192.168.0.254 (Address range for distribution) 192.168.0.1 192.168.0.10 (IP addresses excluded from distribution) 192.168.0.200 192.168.0.254 (IP addresses excluded from distribution) Currently, we have all of our clients still on the .3 - .40 range, and a few machines still active in the .100 - .175 (although there are lots devices that are powered off that still have expired leases with IPs from that range). Since the lease "database" isn't shared between the old and new DHCP server how can I prevent clients from receiving a lease with an IP address that is currently being held by client with a non-expired lease from the old DHCP server? If I just expand the range on the Debian DHCP server to be 192.168.0.10 - 192.168.0.199 is there a way to force clients to not re-use their old IP address when they send their DHCPDISCOVER? Can I make the Windows DHCP server be authoritiative like the ISC implementation? The dhcpd.conf from the Debian server: ddns-update-style none; authoritative; default-lease-time 43200; #12 hours max-lease-time 86400; #24 hours subnet 192.168.0.0 netmask 255.255.255.0 { option routers 192.168.0.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.0.255; range 192.168.0.100 192.168.0.175; } host workstation-1 { hardware ethernet 00:11:22:33:44:55; fixed-address 192.168.0.3; } ... and so on until 192.168.0.40

  Read the article

• No login prompt displayed after updating Ubuntu 10.04, broken gdm

  - by cliff

  So here's what happens: I updated my system the other day, was prompted for a reboot for the update to complete but was in the middle of working so I delayed it until after I was done. I reboot and it's broken :(. It appears to boot normally, with the following exceptions: The purple Ubuntu load screen no longer displays (though it did for the first couple of times I tried to get in). I hear the login prompt sound, but no login prompt appears. Nor is it simply "invisible" - pressing enter, typing my password, and pressing enter again do nothing. Normally my Bluetooth mouse is functional at this point, but it is not. GRUB displays recovery options for my current kernel, and for an older one (2.6.32-24). Trying to boot into .32-24 gives me an error saying "udevadm can't do something while udev is not configured". So I try solutions listed here: http://superuser.com/questions/195786/ubuntu-update-went-wrong-pc-doesnt-boot-how-can-i-repair-it Nothing I tried seemed to work, and after further Googling my hunch is that it's a problem with gdm. Please correct me if I'm wrong, I don't know all that much about how Linux/Ubuntu systems work just yet. Things I'm able to do: Boot to a live CD Ctrl-Alt-F2 after that login sound plays brings me to a console login, which I can successfully do (it's how I tried the solutions above). This works only under the current kernel. A hack I'd be willing to explore is removing the login prompt from the console, but I'd prefer to "simply" fix what's wrong. Like that guy, I need to repair the system rather than reinstall. System: Dell Inspiron 1525 Core 2 Duo Proprietary Driver for Broadcom 43xx wireless Dual-boot with Windows 7 (which is how I'm posting this, unfortunately I only have this machine and any experimenting requires constant reboots into Windows/brokenbuntu) Last package installed was Moonlight, but it appeared to install properly. Kernel: 2.6.32-25 Edit: After working with Karl's suggestions, it seems that the problem is with gdm. Error exit status 245 when attempting to sudo apt-get install --reinstall gdm, also an error processing gdm when running sudo apt-get -f install. How do I reinstall or repair gdm so that I can get back into my machine?

  Read the article

• Hanging page loads every n loads - SOLVED

  - by Christian

  Hi Guys I recently moved my site to a new server (Apache 2, PHP5, MySQL5). The site is an Invision based forum. Every few posts / topics it just hangs. The data has been written because if you stop and reload, the post / thread is there. I thought it was a write issue initially, but nope. So, the data is written but the page load never completes. It doesn't leave the page where the data has been input. Whats the best way to trouble shoot this issue? The only thing I have done recently is reduce my MySQL timeouts, but I can't see that being an issue as the values are still big enough and there are no mentions of timeouts in the MySQL log. (For the record there is nothing in PHP's error log either) Thanks in advance! EDIT: I checked my server-status. It all looked ok, but I have a suspicion I was hitting my ServerLimit, so I doubled that. Also enabled my Keepalives. Will keep an eye on it. EDIT 2: Its now been a few days and this is still occuring. I have more info though; Apache is throwing seg faults, but enabling core dumps does not produce them. I have tried disabling the modules in apache but it just stops things from working. I fear it may actually be DNS related. If I watch Live Headers in Firefox, absolutely nothing happens during this 'hanging' period. After that, the responses come back fairly promptly. UPDATE (05/04): I built the latest versions of Apache and PHP from source, no luck. I then removed those and used the remi repo to update all my packages to the latest stable. Segfaults seem to have stopped, but the hanging is continuing. ini's are at; www.skylinesaustralia.com/php.ini www.skylinesaustralia.com/my.cnf www.skylinesaustralia.com/httpd.conf UPDATE - SOLVED! - The issue was having a gigantic query cache size in MySQL. It was 2GB, changing it to 64M sorted it. Thanks for all the help everybody, much appreciated!!

  Read the article

• kvm and qemu host: Is there a limit for max CPUs (Ubuntu 10.04)?

  - by Valentin

  Today we encountered a really strange behaviour on two identical kvm and qemu hosts. The host systems each have 4 x 10 Cores, which means that 40 physical cores are displayed as 80 within the operating system (Ubuntu Linux 10.04 64 Bit). We started a Windows 2003 32 Bit VM (1 CPU, 1 GB RAM, we changed those values multiple times) on one of the nodes and noticed that it took 15 minutes until the boot process began. During those 15 minutes, a black screen is shown and nothing happens. libvirt and the host system show that the qemu-kvm process for the guest is almost idling. stracing this process only shows some FUTEX entries, but nothing special. After those 15 minutes, the Windows VM suddenly starts booting and the Windows logo occurs. After a few seconds, the VM is ready to be used. The VM itself is very performant, so this is no performance issue. We tried to pin the CPUs with the virsh and taskset tools, but this only made things worse. When we boot the Windows VM with a Linux Live CD there is also a black screen for several minutes, but not as long as 15. When booting another VM on this host (Ubuntu 10.04) it also has the black screen problem, and also here the black screen is only shown for 2-3 minutes (instead of 15). So, summerinzing this: Each guest on each of those identical nodes suffers from idling a few minutes after being started. After a few minutes, the boot process suddenly starts. We have observed that the idling time happens right after the bios of the guest was initialized. One of our employees had the idea to limit the amount of CPUs with maxcpus=40 (because of 40 physical cores existing) within Grub (kernel parameter) and suddenly the "black-screen-idling"-behaviour disappeared. Searching the KVM and Qemu mailing lists, the internet, forums, serverfault and other various sites for known bugs etc. showed no useful results. Even asking in the dev IRC channels brought no new ideas. The people there recommend us to use CPU pinning, but as stated before it didn't help. My question is now: Is there a sort of limit of CPUs for a qemu or kvm host system? Browsing the source code of those two tools showed that KVM would send a warning if your host has more than 255 CPUs. But we are not even scratching on that limit. Some stuff about the host system: 3.0.0-20-server kvm 1:84+dfsg-0ubuntu16+0.14.0+noroms+0ubuntu4 kvm-pxe 5.4.4-7ubuntu2 qemu-kvm 0.14.0+noroms-0ubuntu4 qemu-common 0.14.0+noroms-0ubuntu4 libvirt 0.8.8-1ubuntu6 4 x Intel(R) Xeon(R) CPU E7-4870 @ 2.40GHz, 10 Cores

  Read the article

• dd-wrt router firmware QoS troubleshooting

  - by Jeff Atwood

  I've been using the dd-wrt firmware on my router and I like it a lot! But -- I'm not sure the quality of service (QoS) is working on it. I have it set up as follows: http, port 80 -- Premium bittorrent, port 6969 -- Bulk https, port 443 -- Premium dns, port 53 -- Premium Per the QoS documentation, these levels are: bandwidth is allocated based on the following percentages of uplink and downlink values for each class: Exempt: 100mbps - ignores global limits. Premium: 75% - 100% Express: 15% - 100% Standard: 10% - 100% Bulk: 1.5% - 100% This doesn't entirely seem to work, though -- with busy torrents going I get major pauses in my web browsing which sucks! The QoS documentation gives some steps to check the QoS ... What you'll be interested to look at will be the first set of source and destination IP, including the port numbers. Next the presence of l7proto and the "mark" field. The entries indicate the current live connection QoS priority applied on them based on the "mark" field. The "mark" values correspond to the following Exempt: 100 Premium: 10 Express: 20 Standard: 30 Bulk: 40 (no QoS matched): 0 You may see "mark=0" for some l7proto service even though they are in configured in the list of QoS rules. This may mean that the layer 7 pattern matching system didn't match a new or changed header for that protocol. Custom service on port matches will usually take care of these. On port 6969 (bittorrent) I see a weird mixture of stuff with mark=0 and mark=40 like so cat /proc/net/ip_conntrack udp 17 105 src=98.162.182.42 dst=1.2.3.4 sport=64512 dport=6969 packets=3 bytes=290 src=10.0.0.2 dst=98.162.182.42 sport=6969 dport=64512 packets=4 bytes=202 [ASSURED] mark=0 secmark=0 use=1 tcp 6 117 TIME_WAIT src=98.248.173.174 dst=1.2.3.4 sport=51114 dport=6969 packets=12 bytes=704 src=10.0.0.2 dst=98.248.173.174 sport=6969 dport=51114 packets=10 bytes=440 [ASSURED] mark=40 secmark=0 use=1 tcp 6 598 ESTABLISHED src=165.132.128.201 dst=1.2.3.4 sport=57218 dport=6969 packets=8024 bytes=9919881 src=10.0.0.2 dst=165.132.128.201 sport=6969 dport=57218 packets=4211 bytes=239607 [ASSURED] mark=0 secmark=0 use=1 tcp 6 586 ESTABLISHED src=68.46.9.24 dst=1.2.3.4 sport=64688 dport=6969 packets=6 bytes=490 src=10.0.0.2 dst=68.46.9.24 sport=6969 dport=64688 packets=8 bytes=944 [ASSURED] mark=40 secmark=0 use=1 udp 17 45 src=222.254.228.38 dst=1.2.3.4 sport=25438 dport=6969 packets=5 bytes=454 src=10.0.0.2 dst=222.254.228.38 sport=6969 dport=25438 packets=3 bytes=154 [ASSURED] mark=0 secmark=0 use=1 ( full file visible at http://pastebin.com/AZE6EtWm ) I've been playing around with this log for a little while and I can't see any patterns! Why is some port 6969 bittorrent traffic tagged mark=0 (not matched) by dd-wrt's QoS while others are tagged mark=40 (Bulk) .. any ideas?

  Read the article

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >