Search Results

Search found 9156 results on 367 pages for 'partial match'.

Page 305/367 | < Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >

• SQL Binary Microsoft Access - Combining two tables if specific field values are equal

  - by Jordan

  I am new to Microsoft Access and SQL but have a decent programming background and I believe this problem should be relatively simple. I have two tables that I have imported into Access. I will give you a little context. One table is huge and contains generic, global data. The other table is still big but contains specific, regional data. There is only one common field (or column) between the two tables. Let’s call this common field CF. The other fields in both tables are different. I’ll take you through one iteration of what I need to do. I need to take each CF value in the regional, smaller table and find the common CF value in the larger, global table. After finding the match, I need to take the whole “record” or “row” from the global data and copy it over to the corresponding record in the smaller regional table (This should involve creating the new fields). I need to do this for all CF values in the regional, smaller table. I was recommended to use SQL and a binary search, but I am unfamiliar. Let me know if you have any questions. I appreciate the help!

  Read the article

• Replacing words in string

  - by abkai

  Okay, so I have the following little function: def swap(inp): inp = inp.split() out = "" for item in inp: ind = inp.index(item) item = item.replace("i am", "you are") item = item.replace("you are", "I am") item = item.replace("i'm", "you're") item = item.replace("you're", "I'm") item = item.replace("my", "your") item = item.replace("your", "my") item = item.replace("you", "I") item = item.replace("my", "your") item = item.replace("i", "you") inp[ind] = item for item in inp: ind = inp.index(item) item = item + " " inp[ind] = item return out.join(inp) Which, while it's not particularly efficient gets the job done for shorter sentences. Basically, all it does is swaps pronoun etc. perspectives. This is fine when I throw a string like "I love you" at it, it returns "you love me" but when I throw something like: you love your version of my couch because I love you, and you're a couch-lover. I get: I love your versyouon of your couch because I love I, and I'm a couch-lover. I'm confused as to why this is happening. I explicitly split the string into a list to avoid this. Why would it be able to detect it as being a part of a list item, rather than just an exact match? Also, slightly deviating to avoid having to post another question so similar; if a solution to this breaks this function, what will happen to commas, full stops, other punctuation? It made some very surprising mistakes. My expected output is: I love my version of your couch because you love I, and I'm a couch-lover. The reason I formatted it like this, is because I eventually hope to be able to replace the item.replace(x, y) variables with words in a database.

  Read the article

• trouble calculating offset index into 3D array

  - by Derek

  Hello, I am writing a CUDA kernel to create a 3x3 covariance matrix for each location in the rows*cols main matrix. So that 3D matrix is rows*cols*9 in size, which i allocated in a single malloc accordingly. I need to access this in a single index value the 9 values of the 3x3 covariance matrix get their values set according to the appropriate row r and column c from some other 2D arrays. In other words - I need to calculate the appropriate index to access the 9 elements of the 3x3 covariance matrix, as well as the row and column offset of the 2D matrices that are inputs to the value, as well as the appropriate index for the storage array. i have tried to simplify it down to the following: //I am calling this kernel with 1D blocks who are 512 cols x 1row. TILE_WIDTH=512 int bx = blockIdx.x; int by = blockIdx.y; int tx = threadIdx.x; int ty = threadIdx.y; int r = by + ty; int c = bx*TILE_WIDTH + tx; int offset = r*cols+c; int ndx = r*cols*rows + c*cols; if((r < rows) && (c < cols)){ //this IF statement is trying to avoid the case where a threadblock went bigger than my original array..not sure if correct d_cov[ndx + 0] = otherArray[offset]; d_cov[ndx + 1] = otherArray[offset] d_cov[ndx + 2] = otherArray[offset] d_cov[ndx + 3] = otherArray[offset] d_cov[ndx + 4] = otherArray[offset] d_cov[ndx + 5] = otherArray[offset] d_cov[ndx + 6] = otherArray[offset] d_cov[ndx + 7] = otherArray[offset] d_cov[ndx + 8] = otherArray[offset] } When I check this array with the values calculated on the CPU, which loops over i=rows, j=cols, k = 1..9 The results do not match up. in other words d_cov[i*rows*cols + j*cols + k] != correctAnswer[i][j][k] Can anyone give me any tips on how to sovle this problem? Is it an indexing problem, or some other logic error?

  Read the article

• JavaScript change to DropDownList.SelectedIndex not submitted

  - by Bellfalasch

  Hi So, I have a form to submit fighters. You write his/her name, country, and then the team they fight for + the team's country. When you start typing the name I have constructed my own Ajax AutoCompleter. It will find existing fighters that might match. When you click on one of the suggestions it will populate up to four fields depending on existing data in the database. If you're lucky the fighter already exists with information on country, team, and the team's country. The problems starts when submitting. The JavaScript follows and just get's the id of the country to select (also the value of the select-option), and the select-element itself. function dropdownSelect(value, element) { var dropdown = document.getElementById(element); for (var i = 0; i < dropdown.options.length; i++) { if (dropdown.options[i].value == value) { dropdown.options[i].selected = true; return true; } } } When submitting the ASP.NET-code halt's and says that my country-field is null. So my JavaScript-change of selected field couldn't be read by ASP.NET. Is this a limitation of how ASP.NET works? Or a limitation of my skills? ;P

  Read the article

• XSLT special characters

  - by Apurv

  In the following XSL transformation how do I output the '<' and '' symbol? Input XML: <TestResult bugnumber="3214" testname="display.methods::close->test_ManyInvoke" errortype="Failure"><ErrorMessage><![CDATA[calling close() method failed - expected:<2>]]></ErrorMessage> XSLT: <xsl:template match="TestResult"> <xsl:variable name="errorMessage"> <xsl:value-of select="ErrorMessage" disable-output-escaping="yes"/> </xsl:variable> <Test name='{@testname}'> <TestResult> <Passed>false</Passed> <State>failure</State> <Metadata> <Entry name='bugnumber' value='{@bugnumber}' /> </Metadata> <TestOutput> <Metadata> <Entry name='ErrorMessage' value='{$errorMessage}' /> </Metadata> </TestOutput> </TestResult> </Test> </xsl:template> Output XML: <Test name="display.methods::close-&gttest_ManyInvoke"> <TestResult> <Passed>false</Passed> <State>failure</State> <Metadata> <Entry name="bugnumber" value="3214"/> </Metadata> <TestOutput> <Metadata> <Entry name="ErrorMessage" value="calling close() method failed - expected:&lt;2&gt;"/> </Metadata> </TestOutput> </TestResult> </Test>

  Read the article

• How to convert string with double high/wide characters to normal string [VC++6]

  - by Shaitan00

  My application typically recieves a string in the following format: " Item $5.69 " Some contants I always expect: - the LENGHT always 20 characters - the start index of the text always [5] - and most importantly the index of the DECIMAL for the price always [14] In order to identify this string correctly I validate all the expected contants listed above .... Some of my clients have now started sending the string with Doube-High / Double-Wide values (pair of characters which represent a single readable character) similar to the following: " Item $x80x90.x81x91x82x92 " For testing I simply scan the string character-by-character, compare char[i] and char[i+1] and replace these pairs with their corresponding single character when a match is found (works fine) as follows: [Code] for (int i=0; i < sData.length(); i++) { char ch = sData[i] & 0xFF; char ch2 = sData[i+1] & 0xFF; if (ch == '\x80' && ch2 == '\x90') zData.replace("\x80\x90", "0"); else if (ch == '\x81' && ch2 == '\x91') zData.replace("\x81\x91", "1"); else if (ch == '\x82' && ch2 == '\x92') zData.replace("\x82\x92", "2"); ... ... ... } [/Code] But the result is something like this: " Item $5.69 " Notice how this no longer matches my expectation: the lenght is now 17 (instead of 20) due to the 3 conversions and the decimal is now at index 13 (instead of 14) due to the conversion of the "5" before the decimal point. Ideally I would like to convert the string to a normal readable format keeping the constants (length, index of text, index of decimal) at the same place (so the rest of my application is re-usable) ... or any other suggestion (I'm pretty much stuck with this)... Is there a STANDARD way of dealing with these type of characters? Any help would be greatly appreciated, I've been stuck on this for a while now ... Thanks,

  Read the article

• javascript watching for variable change via a timer

  - by DA

  I have a slide show where every 10 seconds the next image loads. Once an image loads, it waits 10 seconds (setTimeout) and then calls a function which fades it out, then calls the function again to fade in the next image. It repeats indefinitely. This works. However, at times, I'm going to want to over-ride this "function1 call - pause - function2 call - function1 call" loop outside of this function (for instance, I may click on a slide # and want to jump directly to that slide and cancel the current pause). One solution seems to be to set up a variable, allow other events to change that variable and then in my original function chain, check for any changes before continuing the loop. I have this set up: var ping = 500; var pausetime = 10000; for(i=0; i<=pausetime; i=i+ping){ setTimeout(function(){ console.log(gocheckthevariable()); console.log(i); pseudoIf('the variable is true AND the timer is done then...do the next thing') },i) } The idea is that I'd like to pause for 10 seconds. During this pause, every half second I'll check to see if this should be stopped. The above will write out to the console the following every half second: true 10000 true 10000 true 10000 etc... But what I want/need is this: true 0 true 500 true 1000 etc... The basic problem is that the for loop executes before each of the set timeouts. While I can check the value of the variable every half second, I can't match that against the current loop index. I'm sure this is a common issue, but I'm at a loss what I should actually be searching for.

  Read the article

• f# pattern matching with types

  - by philbrowndotcom

  I'm trying to recursively print out all an objects properties and sub-type properties etc. My object model is as follows... type suggestedFooWidget = { value: float ; hasIncreasedSinceLastPeriod: bool ; } type firmIdentifier = { firmId: int ; firmName: string ; } type authorIdentifier = { authorId: int ; authorName: string ; firm: firmIdentifier ; } type denormalizedSuggestedFooWidgets = { id: int ; ticker: string ; direction: string ; author: authorIdentifier ; totalAbsoluteWidget: suggestedFooWidget ; totalSectorWidget: suggestedFooWidget ; totalExchangeWidget: suggestedFooWidget ; todaysAbsoluteWidget: suggestedFooWidget ; msdAbsoluteWidget: suggestedFooWidget ; msdSectorWidget: suggestedFooWidget ; msdExchangeWidget: suggestedFooWidget ; } And my recursion is based on the following pattern matching... let rec printObj (o : obj) (sb : StringBuilder) (depth : int) let props = o.GetType().GetProperties() let enumer = props.GetEnumerator() while enumer.MoveNext() do let currObj = (enumer.Current : obj) ignore <| match currObj with | :? string as s -> sb.Append(s.ToString()) | :? bool as c -> sb.Append(c.ToString()) | :? int as i -> sb.Append(i.ToString()) | :? float as i -> sb.Append(i.ToString()) | _ -> printObj currObj sb (depth + 1) sb In the debugger I see that currObj is of type string, int, float, etc but it always jumps to the defualt case at the bottom. Any idea why this is happening?

  Read the article

• HOw can I have a Alert message in a div inside the form

  - by Paromita Poddar

  I have this script and it sends out an alert message. All I want is to put the alert message in a div inside the form. here is the script can you please help asap ` var registered=false function ExamineRegistration() { var email =document.regform.email.value; var emailcheck= email.indexOf("@") var emailcheck2= email.indexOf(".") var password = document.regform.pass.value; var passcheck = password.charAt(0) var message_out = "Errors: " if(email=="" || password==""){ message_out = message_out+"All boxes should be filled in, " } if(emailcheck==-1 || emailcheck2==-1) { message_out = message_out+"email must contain @ and ., " } if(password!=password) { message_out=message_out+"password must match" } if(message_out == "Errors: ") { message_out = "You have successfully been logged in!" registered=true } alert(message_out); } --> This function helps the user first to register and than to enter the site. function Checkreg() { if (registered ==true) { location.replace("http://www.google.com") } else alert("Please Login to proceed") } </script> ` I have a form. I just want the alert message to appear inside the form at the top. I just dont know how to display the alert message inside the form instead of a pop up.

  Read the article

• Why does my jQuery/YQL call not return anything?

  - by tastyapple

  I'm trying to access YQL with jQuery but am not getting a response: http://jsfiddle.net/tastyapple/grMb3/ Anyone know why? $(function(){ $.extend( { _prepareYQLQuery: function (query, params) { $.each( params, function (key) { var name = "#{" + key + "}"; var value = $.trim(this); if (!value.match(/^[0-9]+$/)) { value = '"' + value + '"'; } query = query.replace(name, value); } ); return query; }, yql: function (query) { var $self = this; var successCallback = null; var errorCallback = null; if (typeof arguments[1] == 'object') { query = $self._prepareYQLQuery(query, arguments[1]); successCallback = arguments[2]; errorCallback = arguments[3]; } else if (typeof arguments[1] == 'function') { successCallback = arguments[1]; errorCallback = arguments[2]; } var doAsynchronously = successCallback != null; var yqlJson = { url: "http://query.yahooapis.com/v1/public/yql", dataType: "jsonp", success: successCallback, async: doAsynchronously, data: { q: query, format: "json", env: 'store://datatables.org/alltableswithkeys', callback: "?" } } if (errorCallback) { yqlJson.error = errorCallback; } $.ajax(yqlJson); return $self.toReturn; } } ); $.yql( "SELECT * FROM github.repo WHERE id='#{username}' AND repo='#{repository}'", { username: "jquery", repository: "jquery" }, function (data) { if (data.results.repository["open-issues"].content > 0) { alert("Hey dude, you should check out your new issues!"); } } ); });

  Read the article

• Load random swf object with jquery

  - by Eggnog

  I'm working on a site that utilizes full screen background video. I have three flash videos I'd like to load into the page which would be displayed randomly on page refresh. I know you can achieve this through action script loading the movies into one main .swf, but I'm rubbish with Flash and am looking for an alternative solution. My search so far has uncovered a method using jquery. Unfortunately my attempts to implement it have failed. I'm hoping someone more knowledgeable than myself can tell me if this technique is valid or what I'm doing wrong. Here's my code to date: <script type="text/javascript" src="files/js/swfobject.js"></script> <script type="text/javascript"> $(document).ready(function() { var sPath; var i = Math.floor(Math.random()*2); switch(i) { case 0: sPath = "flash/homepage_video.swf"; break; case 1: sPath = "flash/homepage_video.swf"; break; } // load the flash version of the image var so = new SWFObject(sPath, "flash-background", "100%", "100%"); so.addParam("scale", "exactFit"); so.addParam("movie", sPath); // NOTE: the sPath variable is also used here so.addParam("quality", "high"); so.addParam("wmode", "transparent"); so.write("homeBackground"); // NOTE: The value in this call to write() MUST match the name of the // HTML element (<div>) you're expecting the swf to show up in }); </script> <body> <div id="homeBackground"> <p>This is alternative content</p> </div> </body> I'm open to other suggestions that don't involve jquery (php perhaps). Thanks.

  Read the article

• Using an element against an entire list in Haskell

  - by Snick

  I have an assignment and am currently caught in one section of what I'm trying to do. Without going in to specific detail here is the basic layout: I'm given a data element, f, that holds four different types inside (each with their own purpose): data F = F Float Int, Int a function: func :: F -> F-> Q Which takes two data elements and (by simple calculations) returns a type that is now an updated version of one of the types in the first f. I now have an entire list of these elements and need to run the given function using one data element and return the type's value (not the data element). My first analysis was to use a foldl function: myfunc :: F -> [F] -> Q myfunc y [] = func y y -- func deals with the same data element calls myfunc y (x:xs) = foldl func y (x:xs) however I keep getting the same error: "Couldn't match expected type 'F' against inferred type 'Q'. In the first argument of 'foldl', namely 'myfunc' In the expression: foldl func y (x:xs) I apologise for such an abstract analysis on my problem but could anyone give me an idea as to what I should do? Should I even use a fold function or is there recursion I'm not thinking about?

  Read the article

• does entity framework or mysql provider swallows timeout exceptions on enumeration of result?!

  - by Freddy Rios

  I'm trying to make sense of a situation I have using entity framework on .net 3.5 sp1 + MySQL 6.1.2.0 as the provider. It involves the following code: Response.Write("Products: " + plist.Count() + "<br />"); var total = 0; foreach (var p in plist) { //... some actions total++; //... other actions } Response.Write("Total Products Checked: " + total + "<br />"); Basically the total products is varying on each run, and it isn't matching the full total in plist. Its varies widely, from ~ 1/5th to half. There isn't any control flow code inside the foreach i.e. no break, continue, try/catch, conditions around total++, anything that could affect the count. As confirmation, there are other totals captured inside the loop related to the actions, and those match the lower and higher total runs. I don't find any reason to the above, other than something in entity framework or the mysql provider that causes it to end the foreach when retrieving an item. The body of the foreach can have some good variation in time, as the actions involve file & network access, my best shot at the time is that when it takes beyond certain threshold there is some type of timeout in the underlying framework/provider and instead of causing an exception it is silently reporting no more items for enumeration. Can anyone give some light in the above scenario and/or confirm if the entity framework/mysql provider has the above behavior?

  Read the article

• MySql "comments" parameter as descriptor?

  - by Nick

  So, I'm trying to learn a lot at once, and this place is really helpful! I'm making a little running log website for myself and maybe a few other people, and I have it so that the user can add workouts for each day. With each workout, I have a variety of information the user can fill out for the workout, such as running distance, time, quality of run, course, etc... I store this in a MySql database as a table with fields titled "distance", "time", "runquality", etc... Now, these field titles don't match up with what I want displayed on the running log, so I was thinking of using the "Comments" attribute for a field to store its human-readable title--thus the field "runquality" would have "Quality of run" as its comment, and then I would pull the comment with a SQL query and display it instead of the field name. Is this a good theoretical/practical way of going about it? And what sort of SQL would I use to pull the comment for the field anyway? Secondly, suppose I want to add the ability for the user to create their own workout descriptors. So say a user wants to add a "temperature" descriptor for their workout. Should I create a script that adds fields to my workout table, or should I create a separate table listing only workout descriptors and somehow link the descriptor table with the "contents" table? I haven't learned any theory about database design or anything so any help is appreciated!

  Read the article

• Appropriate uses of Monad `fail` vs. MonadPlus `mzero`

  - by jberryman

  This is a question that has come up several times for me in the design code, especially libraries. There seems to be some interest in it so I thought it might make a good community wiki. The fail method in Monad is considered by some to be a wart; a somewhat arbitrary addition to the class that does not come from the original category theory. But of course in the current state of things, many Monad types have logical and useful fail instances. The MonadPlus class is a sub-class of Monad that provides an mzero method which logically encapsulates the idea of failure in a monad. So a library designer who wants to write some monadic code that does some sort of failure handling can choose to make his code use the fail method in Monad or restrict his code to the MonadPlus class, just so that he can feel good about using mzero, even though he doesn't care about the monoidal combining mplus operation at all. Some discussions on this subject are in this wiki page about proposals to reform the MonadPlus class. So I guess I have one specific question: What monad instances, if any, have a natural fail method, but cannot be instances of MonadPlus because they have no logical implementation for mplus? But I'm mostly interested in a discussion about this subject. Thanks! EDIT: One final thought occured to me. I recently learned (even though it's right there in the docs for fail) that monadic "do" notation is desugared in such a way that pattern match failures, as in (x:xs) <- return [] call the monad's fail. It seems like the language designers must have been strongly influenced by the prospect of some automatic failure handling built in to haskell's syntax in their inclusion of fail in Monad.

  Read the article

• select2: "text is undefined" when getting json using ajax

  - by user3046715

  I'm having an issue when getting json results back to select2. My json does not return a result that has a "text" field so need to format the result so that select2 accepts "Name". This code works if the text field in the json is set to "text" but in this case, I cannot change the formatting of the json result (code outside my control). $("#e1").select2({ formatNoMatches: function(term) {return term +" does not match any items." }, ajax: { // instead of writing the function to execute the request we use Select2's convenient helper url: "localhost:1111/Items.json", dataType: 'jsonp', cache: true, quietMillis: 200, data: function (term, page) { return { q: term, // search term p: page, s: 15 }; }, results: function (data, page) { // parse the results into the format expected by Select2. var numPages = Math.ceil(data.total / 15); return {results: data.Data, numPages: numPages}; } } }); I have looked into the documentation and found some statements you can put into the results such as text: 'Name', but I am still getting "text is undefined". Thanks for any help.

  Read the article

• xsl:for-each not supported in this context

  - by alexbf

  Hi! I have this XSLT document : <xsl:stylesheet version="1.0" xmlns:mstns="http://www.w3.org/2001/XMLSchema" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/> <xsl:template match="/MyDocRootElement"> <xs:schema id="DataSet" targetNamespace="http://www.w3.org/2001/XMLSchema" attributeFormDefault="qualified" elementFormDefault="qualified" > <xs:element name="DataSet" msdata:IsDataSet="true"> <xs:complexType> <xs:choice maxOccurs="unbounded"> <xs:element name="Somename"> </xs:element> <xs:element name="OtherName"> </xs:element> <!-- FOR EACH NOT SUPPORTED? --> <xsl:for-each select="OtherElements/SubElement"> <xs:element name="OtherName"> </xs:element> </xsl:for-each> </xs:choice> </xs:complexType> </xs:element> </xs:schema> </xsl:template> </xsl:stylesheet> I have a validation error saying that the "for-each element is not supported in this context" I am guessing it has something to do with the xs namespace validation. Any ideas on how can I make this work? (Exclude validation?) Thanks Alex

  Read the article

• .NET Web Serivce hydrate custom class

  - by row1

  I am consuming an external C# Web Service method which returns a simple calculation result object like this: [Serializable] public class CalculationResult { public string Name { get; set; } public string Unit { get; set; } public decimal? Value { get; set; } } When I add a Web Reference to this service in my ASP .NET project Visual Studio is kind enough to generate a matching class so I can easily consume and work with it. I am using Castle Windsor and I may want to plug in other method of getting a calculation result object, so I want a common class CalculationResult (or ICalculationResult) in my solution which all my objects can work with, this will always match the object returned from the external Web Service 1:1. Is there anyway I can tell my Web Service client to hydrate a particular class instead of its generated one? I would rather not do it manually: foreach(var fromService in calcuationResultsFromService) { ICalculationResult calculationResult = new CalculationResult() { Name = fromService.Name }; yield return calculationResult; } Edit: I am happy to use a Service Reference type instead of the older Web Reference.

  Read the article

• Update Web Reference in Visual Studio

  - by NeilD

  Hi, I have inherited a web site project that makes use of a number of WCF Web Services hosted on a BizTalk server. We have two environments that I need to deploy this project to, with different URLs for the different BizTalk servers. i.e. In the Staging environment, I need to point the services at xx.xx.xx.101 In the Live environment, I need to point them at xx.xx.xx.102, or whatever. Currently, we've got all of the URLs stored in keys in the web.config file, so that we can change them dynamically... Unfortunately this isn't working! If I change the URL in the web.config to something other than what the project was compiled with, I get an error when calling the service: Server did not recognize the value of HTTP Header SOAPAction: xx.xx.xx.101\ServiceName\MethodName I'm told that the only way they've known to deploy this is to update the web.config URLs, change all of the web references in Visual Studio to match, click on "update web reference" for each reference in Visual Studio, and then compile. It's driving me mad! I've written a pre-build NAnt script to go through and replace all instances of the URL found anywhere in the project directory, and even that isn't making any difference. There must be something else being pulled down from the service when I click the "update reference", but I'm new to working with web services, and so I'm not sure what. Does anyone have any ideas? Is there a way to do this programatically? Thanks.

  Read the article

• WSDL first for existing service layer

  - by Jurgen H

  I am working on an existing Java project with a typical services - dao setup for which only a webapplication was available. My job is to add webservices on top of the services layer, but the webservices have their own functional analysis and datamodel. The functional analyses ofcource focuses on what is possible in the different service methods. As good practice demands, we used the WSDL first strategy and generated JAXB bound Java classes and a SEI for the webservices. After having implemented the webservices partially, we noticed a 70% match between the datamodel. This resulted in writing converters which take the webservice JAXB classes and map them with the service layer classes. Customer customer = new Customer(); customer.setName(wsCustomer.getName()); customer.setFirstName(wsCustomer.getFirstName(); .. This is a very obvious example, some other mappings where little more complicated. Can anyone give his best practices, experiences, solutions to this kind of situations? Are any of these frameworks usefull? http://transmorph.sourceforge.net/wiki/index.php/Main_Page http://ezmorph.sourceforge.net/ Please don't start a discussion about WSDL first vs code first.

  Read the article

• How to work with CTE. There is some error related to anchor.

  - by Shantanu Gupta

  I am creating a hierarchy representaion of a column. But an error occurs Details are Msg 240, Level 16, State 1, Line 1 Types don't match between the anchor and the recursive part in column "DISPLAY" of recursive query "CTE". I know there is some typecasting error. But I dont know how to remove error. Please just dont only sort out my error. I need explanation why this error is coming. When this error occurs. I am trying to sort table on the basis of sort col that i m introducing. I want to add '-' at every level and want to sort accordingly. Please help WITH CTE (PK_CATEGORY_ID, [DESCRIPTION], FK_CATEGORY_ID, DISPLAY, SORT, DEPTH) AS ( SELECT PK_CATEGORY_ID, [DESCRIPTION], FK_CATEGORY_ID, '-' AS DISPLAY, '--' AS SORT, 0 AS DEPTH FROM dbo.L_CATEGORY_TYPE WHERE FK_CATEGORY_ID IS NULL UNION ALL SELECT T.PK_CATEGORY_ID, T.[DESCRIPTION], T.FK_CATEGORY_ID, CAST(DISPLAY+T.[DESCRIPTION] AS VARCHAR(1000)), '--' AS SORT, C.DEPTH +1 FROM dbo.L_CATEGORY_TYPE T JOIN CTE C ON C.PK_CATEGORY_ID = T.FK_CATEGORY_ID --SELECT T.PK_CATEGORY_ID, C.SORT+T.[DESCRIPTION], T.FK_CATEGORY_ID --, CAST('--' + C.SORT AS VARCHAR(1000)) AS SORT, CAST(DEPTH +1 AS INT) AS DEPTH --FROM dbo.L_CATEGORY_TYPE T JOIN CTE C ON C.FK_CATEGORY_ID = T.PK_CATEGORY_ID ) SELECT PK_CATEGORY_ID, [DESCRIPTION], FK_CATEGORY_ID, DISPLAY, SORT, DEPTH FROM CTE ORDER BY SORT

  Read the article

• xsl defining in xml

  - by aditya parikh

  My first few lines in movies.xml are as follows : <?xml version="1.0" encoding="ISO-8859-1"?> <?xml-stylesheet type="text/xsl" href="movies_style.xsl"?> <movies xmlns="http://www.w3schools.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.w3schools.com file:///B:/USC/Academic/DBMS/HWS/no3/movie_sch.xsd"> and first few lines in movies_style.xsl are as follows : <?xml version="1.0" encoding="UTF-8"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:fo="http://www.w3.org/1999/XSL/Format"> Problem is if remove schema file linking from movies.xml file and keep tag only as <movies> then proper styled table is shown as output else nothing is displayed in browser and error is displayed in console as: "Unsafe attempt to load URL file:///B:/USC/Academic/DBMS/HWS/no3/movies_style.xsl from frame with URL file:///B:/USC/Academic/DBMS/HWS/no3/movies.xml. Domains, protocols and ports must match." Looks like some namespace mistake. Can anyone point out exactly what ?

  Read the article

• Javascript memory leak/ performance issue?

  - by Tom

  I just cannot for the life of me figure out this memory leak in Internet Explorer. insertTags simple takes string str and places each word within start and end tags for HTML (usually anchor tags). transliterate is for arabic numbers, and replaces normal numbers 0-9 with a &#..n; XML identity for their arabic counterparts. fragment = document.createDocumentFragment(); for (i = 0, e = response.verses.length; i < e; i++) { fragment.appendChild((function(){ p = document.createElement('p'); p.setAttribute('lang', (response.unicode) ? 'ar' : 'en'); p.innerHTML = ((response.unicode) ? (response.surah + ':' + (i+1)).transliterate() : response.surah + ':' + (i+1)) + ' ' + insertTags(response.verses[i], '<a href="#" onclick="window.popup(this);return false;" class="match">', '</a>'); try { return p } finally { p = null; } })()); } params[0].appendChild( fragment ); fragment = null; I would love some links other than MSDN and about.com, because neither of them have sufficiently explained to me why my script leaks memory. I am sure this is the problem, because without it everything runs fast (but nothing displays). I've read that doing a lot of DOM manipulations can be dangerous, but the for loops a max of 286 times (# of verses in surah 2, the longest surah in the Qur'an).

  Read the article

• How could I eliminate the meter names with an 'x' after them?

  - by Rose Comete

  Hi I imported some Excel data into MatLab - it is a list of about 200 meter names with about 28 rows each, but the problem is that for each there is a duplicate for the other direction - with the same meter name with an 'x' after it. Does anyone have any ideas as to how I can eliminate these ones with an 'x' after wards? Attached is the part of my code that imports the data, but unfortunately I have not got enough points on this site yet to be allowed to upload data/photos x clear all fid=fopen('sue1.csv'); % Open the file sue1.csv and read it all and put it into an array data = textscan(fid,'%s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s','Delimiter',',','CollectOutput',1); fclose(fid) j = 1; k = 1; % j - turbine number, k - date number for i = 1:length(data{1,1}) % Run through all the data if strcmp(data{1,1}(i),'') == 0 meterold{j}(k,:) = data{1,1}(i,:); % if strcmp(data{1,1}(i),'MeterName') == 0 % nummeter{j}(k,:) = str2num(data{1,1}(i,3:end)); % end k = k + 1; else % These commands are followed in the strings match (empty line) k = 1; % Reset the day counter as we're back to the beginning j = j + 1; % Add one to the meter counter as we're now looking at % a new turbine end end

  Read the article

• How can I use multi-threading with a "for" or "foreach" loop?

  - by saafh

  I am trying to run the for loop in a separate thread so that the UI should be responsive and the progress bar is visible. The problem is that I don't know how to do that :). In this code, the process starts in a separate thread, but the next part of the code is executed at the same time. The messageBox is displayed and the results are never returned (e.g. the listbox's selected index property is never set). It doesn't work even if I use, "taskEx.delay()". TaskEx.Run(() => { for (int i = 0; i < sResults.Count(); i++) { if (sResults.ElementAt(i).DisplayIndexForSearchListBox.Trim().Contains(ayaStr)) { lstGoto.SelectedIndex = i; lstGoto_SelectionChanged(lstReadingSearchResults, null); IsIndexMatched = true; break; } } }); //TaskEx.delay(1000); if (IsIndexMatched == true) stkPanelGoto.Visibility = Visibility.Collapsed; else //the index didn't match { MessagePrompt.ShowMessage("The test'" + ayaStr + "' does not exist.", "Warning!"); } Could anyone please tell me how can I use multi-threading with a "for" or "foreach" loop?

  Read the article

< Previous Page | 301 302 303 304 305 306 307 308 309 310 311 312  | Next Page >